Bukana ea Tataiso ea Taolo ea Mocheso oa PY-20TH ea Pymeter

P: Ke hobane'ng ha u sa khone ho laola mocheso sebakeng se le seng?
- K: Mocheso o lula o fetoha ka linako tsohle tikolohong ea rona e fetohang
- A: Haeba u leka ho sebelisa sesebelisoa sa mocheso ho boloka mocheso sebakeng se le seng, hang ha mocheso o fetoha hanyenyane, o tla etsa hore mochine o futhumatsang kapa o pholileng o ON&OFF khafetsa, e leng se tla senya mochine oa ho futhumatsa / o pholileng ka nako e khutšoanyane haholo. . Qetello: Litaolo tsohle tsa mocheso li sebelisoa ho laola mocheso oa mocheso.
Q: Pymeter Thermostat e laola mocheso joang? (Ho tšoana le Mongobo)
- A: Ka mokhoa oa ho futhumatsa (Low ON High OFF)
  Ipotse potso, ke hobane'ng ha u hloka ho futhumatsa? karabo ke mocheso oa hajoale o tlase ho feta mocheso oo u o lakalitseng, re hloka ho QALA heater ho futhumatsa mocheso. Joale ho tla potso e 'ngoe, ka nako efe ho Qala Heating? Kahoo re hloka ho beha sebaka sa mocheso o tlase ho qala ho futhumatsa (Turn ON outlet for Heater), e bitsoang "ON-Temperature" sehlahisoa sa rona, hammoho le mocheso oa hona joale o nyolohang, ho thoe'ng haeba mocheso o feta? ka nako efe ho Stop Heating? Kahoo ka mor'a moo re hloka ho beha ntlha e phahameng ea mocheso ho Stop Heating(Turn OFF outlet for Heater), e bitsoang "OFF-Temperature" sehlahisoa sa rona. Ka mor'a ho emisa ho futhumatsa, mocheso oa hona joale o ka 'na oa theohela sebakeng sa mocheso o tlaase, joale o tla etsa hore ho futhumale hape, ho kena ka lupu e 'ngoe.
- A: Ka mokhoa oa ho Pholisa (Holimo HO TSOHLE HO TLOA)
  Ke hobane'ng ha u hloka ho phomola? karabo ke mocheso oa hona joale o phahame ho feta mocheso o lebisitsoeng oo u o lakalitseng, re hloka ho QALA pholileng ho theola mocheso, ka nako efe ho re Qala Cooling? Re hloka ho beha sebaka sa mocheso o phahameng ho etsa hore ho be le Cooling(Turn ON outlet for Cooler), e bitsoang "ON-Temperature" sehlahisoa sa rona, hammoho le mocheso oa hona joale o theoha, ho thoe'ng haeba ho bata haholo kamoo re sa batleng kateng? Kahoo ka mor'a moo re hloka ho beha sebaka sa mocheso o tlase ho Stop Cooling(Turn OFF outlet for Cooler), e bitsoang "OFF-Temperature" ho Cooler ea rona), e bitsoang "OFF-Temperature" ho fihlela mocheso o phahameng. ntlha, ka nako eo e tla etsa hore ho pholile hape, ka lupu e 'ngoe. Ka tsela ena, Pymeter Thermostat e laola mocheso oa mocheso ho "ON-Temperature" ~ "OFF-Temperature".

Litaelo Taeo

CD PV: ho sebetsa ka tlase. mokhoa,. bonts'a Mocheso oa hona joale; tlas'a mokhoa oa ho seta, hlahisa khoutu ea menu.
SV: tlas'a mokhoa oa ho sebetsa, bonts'a Mongobo oa hona joale; tlas'a mokhoa oa ho seta, bonts'a boleng ba ho seta.

SET key: tobetsa konopo ya SET bakeng sa metsotswana e 3 ho kenya menu bakeng sa tlhophiso ya tshebetso.
Konopo ea SAV: nakong ea ts'ebetso ea ho seta, tobetsa konopo ea SAV ho boloka le ho tsoa litlhophisong.

EKETSA senotlolo: tlas'a mokhoa oa ho beha, tobetsa konopo ea INCREASE ho eketsa boleng.
DECREASE konopo: tlas'a mokhoa oa ho seta, tobetsa
FOKOTSA senotlolo ho fokotsa boleng. I (J) Letšoao la 1: mabone a khantšitsoe ha ho khantšoa 1.

Pontšo ea 2: mabone a khantšitsoe ha outlet 2 e buletsoe. I @ LED1-L: lebone le ntse le khantšitsoe haeba outlet 1 e setetsoe bakeng sa HEATING.
LED1-R: lebone le khantšitsoe haeba phallo ea 1 e setetsoe bakeng sa HO PHOLISA.

LED2-L: lebone le khantšitsoe haeba outlet 2 e etselitsoe HUMIDIFICATION.
LED2-R: lebone le khantšitsoe haeba outlet 2 e behiloe ho DEHUMIDIFICATION.

Mokhoa oa ho sebetsa (Bohlokoa !!!)

Outlet 1 e tšehetsa mokhoa oa ho futhumatsa / o pholileng;
Outlet 2 e tšehetsa Humidification/Dehumidification.

Sebelisa bakeng sa Heating sesebediswa:
Seta ON-Mocheso( 1 tn) < OFF-Mocheso(1 tF}.

Outlet 1 e bulela ha Mocheso oa hona joale<= ON- Mocheso, 'me oa tima ha Mocheso oa hona joale o nyolohela ho OFF-Temperature kapa ho feta, HA TLA bulela ho fihlela Mocheso oa hona joale o theohela ho ON-Themperetjha kapa tlase! Mokhoa oa ho futhumatsa(Bata-> Ho chesa), O TLAMEHA ho beha 1 tn KA TLASE ho 1
- HF: 1tn: mocheso o fokolang (Ho bata hakae) oo u o lumellang hore o be teng (ke ntlha ea ho bulela setsi ho QALA HO FIHLELA);
- HF: mocheso o phahameng ka ho fetesisa(HoT) o o lumella ho

Sebelisa sesebelisoa se pholileng:
Outlet 1 e buleha ha Mocheso oa hona joale>= ON- Mocheso, 'me oa tima ha Mocheso oa hona joale o oela ho OFF-Thempereichara kapa o theohile, HA TLA buleha ho fihlela Mocheso oa hona joale o nyolohela ho ON-Temperature kapa holimo!

Mokgwa wa ho Phodisa(Ho Tjhesa–> Ho bata), O TSHWANETSE HO SETA 1tn E KGOLO ho feta1tF 1tn: thempereichara e kahodimodimo(Ho tjhesa Jwang) eo o e dumellang hore e be (ke ntlha ya ho bulela outlet ho QALA HO PHOLA);
- HF: bonyane thempereichara(Ho pholile hakakang) eo u e lumellang hore e be (ke ntlha ea ho bulela setsi ho QALA HO PHOLISA);
- HF: bonyane thempereichara(Ho pholile hakakang) eo u e lumellang hore e be (ke ntlha ea ho tima sephutheloana ho STOP COOLING).

Sebelisa bakeng sa sesebelisoa sa Humidification:
Set ON-Humidity(2hn) < OFF-Humidity(2hF}. Outlet 2 e buleha ha Mongobo oa hona joale<= ON-Mongobo 'me oa tima ha Mongobo oa hajoale o nyolohela OFF-Mongobo kapa hodimo, SE TLA bulela ho fihlela Mongobo wa hona jwale o theoha. ho ON-Mongobo kapa tlase!

Mokgwa wa Humidification(O omileng–> Metsi), O TSHWANETSE ho beha 2hn KA TLASE ho 2hF:
- 2hn: mongobo o fokolang oo o o lumellang hore o be teng (ke Ntlha ea ho bulela phallo ho QALA HUMIDIFY);
- 2hF: mongobo o phahameng oo o o lumellang hore o be teng (ke ntlha ea ho tima sesebelisoa ho STOP HUMIDIFY).

Sebelisa sesebelisoa sa Dehumidification:
Kenya Mongobo oa HO BONAHALA{2hn) > OFF-Humidity{2hF). Outlet 2 e buleha ha Mongobo oa hona joale>= ON-Mongobo, 'me oa tima ha Mongobo oa hajoale o oela ho OFF-Mongobo kapa o theohile, o TLA bulela ho fihlela Mongobo oa hona joale o nyolohela ho ON-Mongobo kapa ho feta!

Mokhoa oa ho fokotsa mongobo(Metsi–> O omileng), O TSHWANETSE ho beha 2hn E KGOLO ho feta 2hF:
- 2hn: mongobo o phahameng oo u o lumellang hore o be teng (ke ntlha ea ho bulela phallo ho qala ho DEHUMIDIFY);
- 2hF: mongobo o tlase oo o o lumellang hore o be teng (ke ntlha ea ho tima seketsoana ho STOP DEHUMIDIFY).

Chate ea Phallo ea Phallo

Taelo ea ho seta

Ha molaoli a buletsoe kapa a sebetsa, tobetsa konopo ea SET bakeng sa metsotsoana e fetang 3 ho kenya mokhoa oa ho beha, fensetere ea PV e bonts'a khoutu ea pele ea menu "CF", ha fensetere ea SV e bontša ho latela boleng ba ho beha. Tobetsa konopo ea SET ho ea ho menu e latelang, tobetsa konopo ea INCREASE kapa DECREASE konopo ho beha boleng ba parameter ea hona joale. Kamora hore ho seta ho etswe, tobetsa konopo ya SAV ho boloka di-setting le ho kgutlela mokgweng o tlwaelehileng wa pontsho. Nakong ea ho seta, haeba ho se na ts'ebetso ea metsotsoana e 30, sistimi e tla boloka litlhophiso ebe e khutlela mokhoeng o tloaelehileng oa ponts'o.

Likarolo tse ka Sehloohong

E entsoe ka libaka tse peli tse ikemetseng;
Li-Relay tse peli, tse khonang ho laola Ho futhumatsa / ho Pholisa, Lisebelisoa tsa Humidification / Dehumidification ka nako e le 'ngoe kapa ka thoko;
Bulela le ho tima lisebelisoa ka mocheso o lakatsehang oa Mongobo oa I, o bonolo haholo ebile o bonolo ho o sebelisa;
Celsius kapa Fahrenheit Read-out;
Pontšo e kholo, bala Mocheso le Mongobo oa hajoale;
Alamo ea Mocheso o Phahameng le o Tlase le Mongobo;
Ho lieha ha Power-on, sireletsa lisebelisoa tse tsoang ho li-toggling tse ngata haholo;
Tekanyo ea Mocheso le Mongobo;
Litlhophiso lia bolokoa le ha motlakase o tima.

Tlhaloso

Mocheso; Mongobo oa Mongobo -50 ~ 99 ° C / -58 ~ 210 ° F; 0~99%RH
Qeto 0.1 °C / 0.1° F;0.1%RH
Ho nepahala ±1 ° c / ±1 ° F; ±3%RH
Kenyeletso / Matla a Phahamisang 85~250VAC, 50/60Hz, MAX 1 QA
Buzzer Alarm High I Low Mocheso Ke Mongobo
Kena Mohala oa Matla; Sensor Cable 1.35m 14.5ft; 2m 16.56ft

Menu Taelo

Tlhokomeliso: Hang ha boleng ba CF bo fetotsoe, litekanyetso tsohle tsa Setting li tla khutlisetsoa ho Maemo a Default. &Se ke oa e bapisa le thermometer e sa nepahalang kapa sethunya sa temp! Ka kopo, Lekanya ka motsoako oa metsi a leqhoa (0 °C/32°F) ha ho hlokahala!

Maikutlo: Buzzer e tla lla ka molumo oa "bi-bi-bi ii" ho fihlela mocheso o khutlela sebakeng se tloaelehileng kapa senotlolo leha e le sefe se tobetsoa; "EEE" e hlahisoa fensetereng ea PV/SV ka alamo ea "bi-bi-bi ii" haeba sensor e fosahetse.

Ho lieha ha Power-On (P7):
(Example) haeba e behiloe P7 ho 1 min, mabenkele a ke ke a buloa ho fihlela ha 1 min e bala ho tloha ha motlakase o tima.
U ka lekanyetsa mocheso joang?
Koahela li-probes ka botlalo ka har'a motsoako oa metsi a leqhoa, mocheso oa 'nete e lokela ho ba 0 ° C / 32 ° F, haeba mocheso oa ho bala o se joalo, fokotsa (+-) phapang ho Setting -C1 / C2, boloka, 'me u tsoe.

Tšehetso le Warranty

Lihlahisoa tsa pyrometer li fanoa ka Warranty ea Bophelo bohle le Tšehetso ea Theknoloji. Lipotso / bothata bofe kapa bofe, ka kopo ikutloe u lokolohile ho ikopanya le rona nako efe kapa efe ka www.pymeter.com kapa Imeile support@pymeter.com.