HumiTherm-cS
E tsoetseng pele 'Mocheso + Mongobo'
Selaoli se Rerang se nang le Lialamo
Bukana ea Mosebelisi

HumiTherm-cS Advanced Temperature + Humidity Programmable Controller

Bukana ena e khuts'oane e reretsoe ho bua ka potlako mabapi le likhokahano tsa lithapo le ho batla paramethara. Bakeng sa lintlha tse ling mabapi le ts'ebetso le ts'ebeliso; ka kopo kena ho www.ppiindia.net

LIKHOKELO MOTLATSI

KOPANO KOPANO

KOPANO LEBOTO

Kopano ea elektronike e na le Liboto tse 'nè tse Hatisitsoeng tsa Potoloho (PCB); CPU PCB, Display PCB, Output PCB & Power Supply PCB. Palo e ka tlase e bonts'a boemo ba PCB ka 'ngoe ka har'a sebaka se koaletsoeng.

LIEKETSENG JUPER

LITLHAKU TSE KHOLO
SERIAL COMM. MODULELINTLHA TSE LING TSA TLHOKOMELISO: LEQEPHE LA 12

Mekhahlelo	Litlhophiso (Boleng ba kamehla)
Khetha Channel	Temp Mongobo (Ka ho sa feleng: Mocheso)
Mofuta oa ho Kena	(Tlhahlobo: RTD)
Letšoao le Tlase	Mofuta oa ho Kena Litlhophiso Ea kamehla 0 ho 20mA 0.00 ho Signal High 0.00 4 ho 20mA 4.00 ho Signal High 4.00 0 ho isa ho 50 mV 0.00 ho Signal High 0.00 0 ho isa ho 200 mV 0.0 ho Signal High 0.0 0 ho 1.25 V 0.00 ho Signal High 0.00 0 ho 5 V 0.000 ho Signal High 0.000 0 ho 10 V 0.00 ho Signal High 0.00 1 ho 5 V 1.000 ho Signal High 1.000
Letšoao le Phahameng	Mofuta oa ho Kena Litlhophiso Ea kamehla 0 ho 20mA 20.00 ho Signal Low 20.00 4 ho 20mA 20.00 ho Signal Low 20.00 0 ho isa ho 50 mV 50.00 ho Signal Low 50.00 0 ho isa ho 200 mV 200.0 ho Signal Low 200.0 0 ho 1.25 V 1.250 ho Signal Low 1.250 0 ho 5 V 5.000 ho Signal Low 5.000 0 ho 10 V 10.00 ho Signal Low 10.00 1 ho 5 V 5.000 ho Signal Low 5.000
Range Low	- lilemo tse 199.9 ho isa ho tse 999.9 (Ka ho feletseng: 0.0)
Range Holimo	- lilemo tse 199.9 ho isa ho tse 999.9 (Ka ho feletseng: 100.0)
Offset	- lilemo tse 50.0 ho isa ho tse 50.0 (Ka ho feletseng: 0.0)

LINTLHA TSA TAOLI : LEQEPHE LA 11

Mekhahlelo	Litlhophiso (Boleng ba kamehla)
Khetha Channel	Temp Mongobo (Ka ho sa feleng: Mocheso)
Ketso ea ho Laola	(Tlhaloso ea kamehla: PID)
Setpoint Limit	Mocheso = -199.9 ° C ho SP.Hi RH = 0.0% ho SP.Hi (Ka ho feletseng: 0)
Setpoint Limit e phahameng	Mocheso = SP.Lo ho ea ho 600.0°C RH = SP.Lo ho isa ho 100.0% (Ka ho feletseng: 100)

Mekhahlelo	Litlhophiso (Boleng ba kamehla)
Mocheso / mongobo Moeli o Motla oa Matla	0.0% ho Moeli o Phahameng oa Matla (Ka ho feletseng: 0.0)
Mocheso / mongobo Moeli o Phahameng oa Matla	Moeli o Tlase oa Matla ho isa ho 100.0% (Ka ho feletseng: 100.0)
Sehlopha sa Proportional (Sebaka se pholileng sa Pre-dominant)	Bakeng sa Temp = 0.1 ho 999.9 ° C Bakeng sa RH = 0.1 ho 999.9% (Ka ho feletseng: 50.0)
Nako e Kopanetsoeng (Sebaka se pholileng sa Pre-dominant)	1 ho isa ho 3600 Seconds (Ka ho feletseng: 100 sec.)
Nako e Ncha (Sebaka se pholileng sa Pre-dominant)	1 ho isa ho 600 Seconds (Ka ho feletseng: 16 sec.)
Sehlopha sa Proportional (Sebaka sa Mocheso o Moholo)	Bakeng sa Temp = 0.1 ho 999.9 ° C Bakeng sa RH = 0.1 ho 999.9% (Ka ho feletseng: 50.0)
Nako e Kopanetsoeng (Sebaka sa Mocheso o Moholo)	1 ho isa ho 3600 Seconds (Ka ho feletseng: 100 sec.)
Nako e Ncha (Sebaka sa Mocheso o Moholo)	1 ho isa ho 600 Seconds (Ka ho feletseng: 16 sec.)
Nako ea Cycle	0.5 ho isa ho 100.0 metsotsoana (ka mehato ea 0.5 secs.) (Ka ho feletseng: 10.0 sec.)
Hysteresis	0.1 ho ea ho 999.9 (Ka ho feletseng: 2.0)

LIPARAMERE TSA TLHOKOMELISO: LEQEPHE LA 17

Mekhahlelo	Litlhophiso (Boleng ba kamehla)
Compressor Output Mode	TLOA ON MOSEBETSI (Tlhaloso : Ka ho iketsa)
Compressor Strategy	Bulb e omileng SP Bulb e omileng PV %RH PV (Kamehla : Dry Bulb SP)
Moeli o Beha-ntlha	Temp. SP Low Limit ho Temp. SP High Moedi (Ka ho feletseng: 45.0)
Compressor Setha-ntlha	0.0 ho ea ho 50.0 (Ka ho feletseng: 0.2)
Hysteresis ea compressor	0.1 ho ea ho 25.0 (Ka ho feletseng: 0.2)
Nako ea konpresser e lieha	0.00 ho isa ho 10.00 Min (ka mehato ea metsotsoana e 5.) (Ka ho feletseng: 0 Sec.)

TSELA TSA TSAMAISO: LEQEPHE LA 13

Mekhahlelo	Litlhophiso (Boleng ba kamehla)
Tune Taelo	(Ka ho feletseng : Che)
Mosebetsi o emeng	(Tlhaloso ea kamehla: Tlosa)
Taolo / alamo Set-point Adjustment Tumello	(Tlhaloso : Thibela)
Mosebetsi oa ho Kena ka Dijithale	Ha ho letho Boemo ba Metsi Alamo ACK (Ka ho feletseng : Ha ho letho)
Maikutlo a Boemo ba Metsi	Bula joalo ka Tlase Koala joalo ka Low (Kamehla : Bula ka Tlase)
Baud Rate	(Ka ho feletseng: 9.6)
Parity	Ha ho letho Leha ho le joalo E makatsang (Tlhaloso: Ho lekana)
Sesebelisoa sa Lekhoba Id	1 ho ea ho 127 (Ka ho feletseng: 1)
Seriyo Ngola Tumelo	(Ka ho feletseng : Che)

LITLHAKISO TSA ALAMO: LEQEPHE-10

Mekhahlelo	Litlhophiso (Boleng ba kamehla)
Khetha Channel	(Ka ho sa feleng: Mocheso)
Mofuta oa Alarm-1	Ha ho letho Ts'ebetso e tlase Ts'ebetso e Phahameng Sehlopha sa ho kheloha Fesetere Band (Ka ho feletseng : Ha ho letho)
Alarm-1 Hysteresis	0.2 ho ea ho 99.9 (Ka ho feletseng: 2.0)
Alarm-1 Thibela
Mofuta oa Alarm-2	(Ka ho feletseng: Ha ho letho)
Alarm-2 Hysteresis	0.2 ho ea ho 99.9 (Ka ho feletseng: 2.0)
Alarm-2 Thibela	(Ka ho feletseng : Che)
Khetha Channel	Temp Mongobo (Ka ho sa feleng: Mocheso)
Mofuta oa Output oa Rekota	(Ka ho feletseng: 4 - 20mA)
Sehatisi se Tlase	Temp. : 199.9 - 999.9 RH: 0 ho isa ho 100% (Ka ho feletseng: 0.0)
Mohatisi Holimo	Temp. : 199.9 - 999.9 RH: 0 ho isa ho 100% (Ka ho feletseng: 100.0)

TAEBELE- 1

Khetho	Range (Min. to Max.)	Qeto
3-terata, RTD PT100	-199.9 ho ea ho +600.0°C	0.1 °C
0 ho 20mA DC hona joale	-199.9 ho isa ho 999.9 diyuniti	0.1 likarolo
4 ho 20mA DC hona joale
0 ho isa ho 50mV DC voltage
0 ho isa ho 200mV DC voltage
0 ho 1.25V DC voltage
0 ho 5.0V DC voltage
0 ho 10.0V DC voltage
1 ho 5.0V DC voltage

PANELE LEKOPA LEBAKA

Phanele e ka peleTs'ebetso ea Keys

Letšoao	Senotlolo	Mosebetsi
	LEQEPHE	Tobetsa ho kenya kapa ho tsoa ho mokhoa oa ho seta.
	TLASE	Tobetsa ho fokotsa boleng ba parameter. Ho hatella hang ho fokotsa boleng ka palo e le 'ngoe; ho tshoara ho potlakisa phetoho.
	UP	Tobetsa ho eketsa boleng ba paramethara. Ho hatella hang ho eketsa boleng ka palo e le 'ngoe; ho tshoara ho potlakisa phetoho.
	KENA	Tobetsa ho boloka boleng ba paramente e behiloeng le ho tsamaisetsa paramenteng e latelang ho LEQEPHE.
	Temp. Seta-ntlha Edita	Tobetsa ho kenya edita mode bakeng sa Temperature Set-point.
	%RH Seta-ntlha Edita	Tobetsa ho kenya mokhoa oa ho edita bakeng sa %RH Set-point.
	Boemo ba Standby	Tobetsa ho kenya/tswa mokgwa wa tshebetso wa Standby.
	View Boemo	Tobetsa ho view tlhahisoleseling e sa sebelisoeng khafetsa joalo ka matla a taolo ea tlhahiso le Wet Bulb SP.

Matšoao a Phoso ea PV

Molaetsa	Mofuta oa Phoso ea PV
	Ho feta (Mocheso o omileng oa Bulb kaholimo ho Max. Range)
	Tlas'a maemo (Mocheso o omileng oa Bulb ka tlase ho Min. Range)
	Bula (Sensor e omileng ea Bulb (RTD) e robehile / e butsoe)

101, Diamond Industrial Estate, Navghar,
Vasai Road (E), Setereke. Palghar - 401 210.
Lithekiso: 8208199048 / 8208141446
Tšehetso: 07498799226 / 08767395333
E: sales@ppiindia.net,
support@ppiindia.net
La 2022 Pherekhong

Litokomane / Lisebelisoa

PPI HumiTherm-cS Advanced Temperature + Humidity Programmable Controller [pdf] Bukana ea Mosebelisi HumiTherm-cS Advanced Temperature Humidity Programmable Controller, HumiTherm-cS, Advanced Temperature Humidity Programmable Controller, Temperature Humidity Programmable Controller, Humidity Programmable Controller, Programmable Controller, Controller

Litšupiso

• Bukana ea Mosebelisi