PMK HSDP Series High Speed Differential Probes le Universal BNC Interface Instruction Manual
Boitsebiso ba Tšireletseho
Thibela kotsi ea motho, tšenyo ea mollo le sehlahisoa.
Ho qoba kotsi ea botho le ho thibela mollo kapa tšenyo ea sehlahisoa sena kapa lihlahisoa tse amanang le eona, review le ho latela mehato e latelang ea tšireletso. Hlokomela hore haeba u sebelisa kopano ena ea lipatlisiso ka tsela e sa hlalosoang tšireletso eo sehlahisoa sena se fanang ka eona e ka senyeha. Ke basebetsi ba tšoanelehang feela ba lokelang ho sebelisa kopano ena ea lipatlisiso.
Sebelisa lisebelisoa tsa motheo feela.
Se ke oa hokahanya karolo ea motheo ea probe ho ntho e ka bang teng ntle le mobu oa lefatše. Kamehla etsa bonnete ba hore probe le sesebelisoa sa ho metha li thehiloe hantle.
Kopanya le ho hakolla hantle.
Kopanya tlhahiso ea probe ho sesebelisoa sa tekanyo. Ka boikhethelo, hokela karolo e kenang fatše ea probe e fapaneng le mobu oa lefatše pele o hokela likarolo tse fapaneng tsa probe ho potoloho e tlas'a teko. Hakolla lintho tse kenang ka har'a phuputso le khokahanyo ea fatše ea probe ho tloha potolohong e tlas'a teko pele o hakolla sesebelisoa ho sesebelisoa sa tekanyo.
Sheba le ho hlahloba lintlha tsa lisebelisoa.
Se ke oa sebelisa matla afe kapa afe a motlakase ho sesebelisoa sa probe se fetang litekanyetso tse phahameng tsa probe kapa lisebelisoa tse hokahantsoeng ho eona. Ka kopanelo kamehla sehlopha se tlase sa litekanyetso / tekanyo se sebetsa ho probe le lisebelisoa tse hokahantsoeng ho eona.
Sheba basebeletsi ba tšoanelehang ba tšebeletso.
Mabapi le HSDP Series
Letoto la HSDP le fana ka ts'ebetso ea maemo a holimo ka ho fetisisa ka> 2GHz mefuta e fihlang ho ± 42V mefuta e fapaneng ea ho kenya, le ± 8V ho fihla> 4GHz bandwidth. Matla a ho kenya letsoho a phahameng, lerata le tlase, le 60V e tloaelehileng ea voltage fana ka mefuta e fapaneng e loketseng litekanyo tse fapaneng tsa potoloho bakeng sa moralo, netefatso, ho lokisa matšoao a analoge, joalo ka ha a sebelisoa ho phepelo ea motlakase e fetotsoeng.
Letoto la li-probes tsa HSDP le lona le loketse ho hlahisa mefuta e mengata ea meralo ea libese, e ts'ehetsang libaka tse tsebahalang haholo tsa serial bus interfaces, joalo ka USB2.0, Ethernet (GbE), CAN/LIN, I2C, SPI, SATA, FireWire (1394b) , FlexRay, HDMI joalo-joalo.
Letoto la HSDP le na le lisebelisoa tsa indasteri tse 2.54mm (0.1“) tse ka hokahanang habonolo le mefuta e fapaneng ea likhokahanyo tse fumanehang 'marakeng. Moralo oa hlooho ea compact probe, le lisebelisoa tsa eona tse fapaneng, o etsa hore letoto la HSDP le lokele ho lekola lisebelisoa tsa kajeno tsa IC.
Lisebelisoa tsa Khokahano ea Motho ka Mong bakeng sa Botšepehi bo Phahameng ka ho Fetisisa ba Lipontšo
Bokhoni ba ho kenya letsoho bo eketsa mefuta e mengata ea tlhahiso ea probe. Ho ba le matla a ho kenya <0.6pF || 1MΩ lipakeng tsa malebela a probe, e lumella HSDP Series hore e sebelisoe ho lekola lipotoloho tse hlokolosi ntle le ho kenya potoloho hampe tlas'a teko.
Phapang ea Kenyelletso ea Kenyelletso e Impedans ho Earth Ground
HSDP-Series e sebelisa tlhahiso ea FET e tloaelehileng ea PMK amplifier e fanang ka karabo e phahameng ea maqhubu a phahameng, hammoho le lerata le tlaase le ho sotha ho tlaase ho tšoara ka nepo matšoao a lekantsoeng.
Mefuta eohle e fumaneha ka bolelele ba 7.5m kapa 2m. Liphetolelo tsena tsa li-cable tse telele li thusa mosebelisi ho etsa lipatlisiso a le hole, ho thata ho fihlela lintlha tsa tlhahlobo tse ke keng tsa khoneha ka tharollo e 'ngoe ea 'marakeng kajeno.
HSDP Series e na le sehokelo sa bokahohleng sa BNC mme e tsamaisana le oscilloscope efe kapa efe e nang le 50Ω input impedance, kapa 1MΩ input impedance le 50Ω feed-thly terming, e dumellang HSDP Series hore e sebelisoe ho oscilloscope efe kapa efe ka lab.
HSDP-Series' DC offset e ka laoloa ka ho sebelisa remote control. Software ea "PMK Probe Control" e fana ka bokhoni ba hore mosebelisi a laole tlhahlobo a le hole ka komporo, mme e fa mosebelisi sebopeho sa mosebelisi se hlakileng. Software ha e lefelloe, 'me e kenyelelitsoe le lisebelisoa tsa motlakase tsa PMK tsa 2ch le 4ch, PS2 le PS3, tse hlokahalang ho matlafatsa probe. Lisebelisoa tsa motlakase tsa PS2 le PS3 li na le sebopeho sa USB hammoho le sebopeho sa boikhethelo sa LAN. Sesebelisoa se secha sa AP-01, 1 betri pakete ea motlakase, e fana ka> 8h ea ts'ebetso e nkehang le e ka thōko, e lumellang mosebedisi ho fetoha ha maemo moo probe e ka sebelisoang. AP-01 e fana ka matla ho probe feela e se nang software ea remote control.
Keletso Voltage Range Examples
Litlhaloso
Litlhaloso tse sa tšoauoang ka (*) joalo ka ha li netefalitsoe li tloaelehile. Nako ea ho futhumatsa ke metsotso e 20.
Litlhaloso tsa motlakase li arotsoe ka litafole tse ngata. Tlhaloso e 'ngoe le e' ngoe e khethoa ha ho sebelisoa motlakase oa PS2 ho +23 °C mocheso o potolohileng.
Litlhaloso tsa Motlakase
| Nomoro ea Mohlala | Attenuation karo-karolelano(± 2 % ho DC) | Bophahamo ba motlakase (-3dB) | Phapang Moqtage Range(DC + Tlhōrō ea AC) 1 | Phapang ea DC Offset Range |
| HSDP4010 | 10:1 | > 4 GHz4.2 GHz (mofuta.) | ± 8 V(16 Vpp) | ± 12 V |
| HSDP2010 | 10:1 | > 2 GHz2.3 GHz (mofuta.) | ± 8 V(16 Vpp) | ± 12 V |
| HSDP2010L | 10:1 | > 1.8 GHz2.0 GHz (mofuta.) | ± 8 V(16 Vpp) | ± 12 V |
| HSDP2025 | 25:1 | > 2 GHz2.2 GHz (mofuta.) | ± 20 V(40 Vpp) | ± 30 V |
| HSDP2025L | 25:1 | > 1.8 GHz2.0 GHz (mofuta.) | ± 20 V(40 Vpp) | ± 30 V |
| HSDP2050 | 50:1 | > 2 GHz2.2 GHz (mofuta.) | ± 42 V(84 Vpp) | ± 60 V |
Tafole e latelang ea litlhaloso e nepahetse bakeng sa mefuta eohle ea letoto la HSDP:
| Mokhoa o Tloaelehileng Moqtage Range(DC + Peak LF-AC)1 | ± 60 V |
| Maximum E sa Senyeheng Moqtage pakeng tsa lets'oao le GND(DC + Tlhōrō ea LF-AC) 1 | ± 60 V |
| Phapang ea Kenyelletso Impedance | 1 MΩ || 0.6 pF |
| Tšitiso ea ho Kena ka Nako e le 'Ngoe | 500 kΩ | 1.2 pF |
| Input Coupling of theSesebelisoa sa ho Lekanya | 50 Ω |
Litlhaloso tsa Motlakase (E Tsoela Pele)
Review hape le nyenyefatso e mabapi le li-graph tsa khafetsa hamorao tokomaneng ena..
| Nomoro ea Mohlala | Lerata (Monahano o lebisitsoe)2 | Nako ea ho phahama (10-90%) | Ho lieha ho phatlalatsoa | Karolelano e Tloaelehileng ea ho hana(CMRR) | |
| HSDP4010 | <2 mV rms100 nV/sqrt(Hz)selelekela | <140ps | 6.7 ns | DC: | TBD |
| selelekela | 1 MHz: | TBD | |||
| 10 MHz: | TBD | ||||
| 100 MHz: | TBD | ||||
| 500 MHz: | TBD | ||||
| 1 GHz: | TBD | ||||
| 2 GHz: | TBD | ||||
| HSDP2010 | <1.5 mV rms | <200 maq | 6.7 ns | DC: | > 70dB |
| 50 nV/sqrt(Hz) | 1 MHz: | > 50dB | |||
| 10 MHz: | > 45dB | ||||
| 100 MHz: | > 35dB | ||||
| 500 MHz: | > 25dB | ||||
| 1 GHz: | > 25dB | ||||
| HSDP2010L | <2.5 mV rms | <200 maq | 30.5 ns | DC: | > 70dB |
| 93 nV/sqrt(Hz) | 1 MHz: | > 50dB | |||
| 10 MHz: | > 45dB | ||||
| 100 MHz: | > 35dB | ||||
| 500 MHz: | > 25dB | ||||
| 1 GHz: | > 25dB | ||||
| HSDP2025 | <3 mV rms | <200 maq | 6.7 ns | DC: | > 70dB |
| 128 nV/sqrt(Hz) | 1 MHz: | > 50dB | |||
| 10 MHz: | > 45dB | ||||
| 100 MHz: | > 35dB | ||||
| 500 MHz: | > 25dB | ||||
| 1 GHz: | > 25dB | ||||
| HSDP2025L | <5 mV rms | <200 maq | 30.5 ns | DC: | > 70dB |
| 238 nV/sqrt(Hz) | 1 MHz: | > 50dB | |||
| 10 MHz: | > 45dB | ||||
| 100 MHz: | > 35dB | ||||
| 500 MHz: | > 25dB | ||||
| 1 GHz: | > 25dB | ||||
| HSDP2050 | <6 mV rms | <200 maq | 6.7 ns | DC: | TBD |
| 250 nV/sqrt(Hz) | 1 MHz: | TBD | |||
| selelekela | 10 MHz: | TBD | |||
| 100 MHz: | TBD | ||||
| 500 MHz: | TBD | ||||
| 1 GHz: | TBD | ||||
Lintlha:
2 RMS lerata [mV] ho 500MHz bandwidth; lerata ho [nV/sqrt(Hz)] ka 100MHz
| Bophahamo | ho sebetsa | ho fihlela ho 2000 m |
| e sa sebetseng | ho fihlela ho 15000 m | |
| Mocheso Range | ho sebetsa | 0 °C ho ea +50 °C |
| e sa sebetseng | -40 °C ho ea +71 °C | |
| Boholo ba Mongobo o Batlang | ho sebetsa | Mongobo o lekanyelitsoeng oa 80% bakeng sa mocheso ho fihlela ho +31 °C, o theoha ka mokhoa o tšoanang ho ea ho 40% ho +50 °C. |
| e sa sebetseng | Mongobo o lekanyelitsoeng oa 95% bakeng sa mocheso o fihlang ho +40 °C |
Probe Dimensions
Litekanyo tse bontšitsoeng li ka limilimithara le [inch].
Karabelo e Tloaelehileng ea Maqhubu
Morero oa karabelo o bontšitsoeng mona ke oa letoto la lipatlisiso ntle le lisebelisoa. Likarabo tsa khafetsa tse nang le lisebelisoa tse ikhethileng lia fumaneha ha u kopa.
Karabelo ea Khafetsa - Letoto la HSDP: mefuta ea 2 GHz
Tšitiso e Tloaelehileng ea ho Kena
Phetoho ea ho kenya letsoho ea probe e fokotseha ha maqhubu a lets'oao le sebelisitsoeng a eketseha.
Tlhōrō e Tloaelehileng ea Kenyelletso - Letoto la HSDP
Hlokomela hore palo e kholo ea ho kenya letsohotagtekanyetso ea probe e fokotseha ha maqhubu a lets'oao le sebelisitsoeng a eketseha.
Keletso Voltage – HSDP2010 / HSDP2010L
Keletso Voltage – HSDP2025 / HSDP2025L
Nako e Tloaelehileng ea ho Phahamisa
Merero e tloaelehileng ea nako ea ho nyoloha e tla tla haufinyane.
Ho Odara Boitsebiso
Hoa hlokahala phepelo ea motlakase e nang le matla a ho laola remoutu kapa pakete ea betri bakeng sa ts'ebeliso e nkehang. Lisebelisoa tse tloaelehileng li thathamisitsoe ho Mohato oa 3.
Mohato oa 1: Khetha Probe
| Odara No. | Ntho |
| HSDP4010 | Phapang ea probe 4GHz, ± 8V diff, ± 60V mokhoa o tloaelehileng, 10:1, lerata le tlase, 1.3m, ho kenyelletsa le sete ea lisebelisoa tse tloaelehileng |
| HSDP2010 | Phapang ea probe 2GHz, ± 8V diff, ± 60V mokhoa o tloaelehileng, 10:1, lerata le tlase, 1.3m, ho kenyelletsa le sete ea lisebelisoa tse tloaelehileng |
| HSDP2010L | Phapang ea probe 1.8GHz, ± 8V diff, ± 60V mokhoa o tloaelehileng, 10:1, lerata le tlase, 7.5m, ho kenyelletsa le sete ea lisebelisoa tse tloaelehileng |
| HSDP2025 | Phapang ea probe 2GHz, ± 20V diff, ± 60V mokhoa o tloaelehileng, 25:1, lerata le tlase, 1.3m, ho kenyelletsa le sete ea lisebelisoa tse tloaelehileng |
| HSDP2025L | Phapang ea probe 1.8GHz, ± 20V diff, ± 60V mokhoa o tloaelehileng, 25:1, lerata le tlase, 7.5m, ho kenyelletsa le sete ea lisebelisoa tse tloaelehileng |
| HSDP2050 | Phapang ea probe 2GHz, ± 42V diff, ± 60V mokhoa o tloaelehileng, 50:1, lerata le tlase, 1.3m, ho kenyelletsa le sete ea lisebelisoa tse tloaelehileng |
Mohato oa 2: Khetha Phepelo ea Matla
Mosebetsi oa phini ea phepelo ea motlakase o fapane le lisebelisoa tse ling tsa motlakase. Sebelisa matla a mantlha a PMK feela a nang le lisebelisoa tsa PMK.
| Odara No. | Ntho |
| 889-09V-PS2 | PS-02 (liteishene tse 2, tse nang le sebopeho sa USB bakeng sa taolo e hole) |
| 889-09V-PS2-L | PS-02-L (liteishene tse 2, tse nang le LAN le USB interface bakeng sa taolo e hole) |
| 889-09V-PS3 | PS-03 (liteishene tse 4, tse nang le sebopeho sa USB bakeng sa taolo e hole) |
| 889-09V-PS3-L | PS-03-L (liteishene tse 4, tse nang le LAN le USB interface bakeng sa taolo e hole) |
| 889-09V-AP01 | AP-01 (pakete ea betri, mocha o le 1, ha ho taolo e hole) |
| 890-520-900 | Motlakase oa phepelo ea motlakase (0.5 m), o kenyellelitsoe sebakeng sa probe ea ho tsamaisoa |
| 890-520-915 | Cable ea phepelo ea motlakase (1.5 m) |
Mohato oa 3: Lisebelisoa
Lisebelisoa tsa letoto lena la lipatlisiso li lekoa ka polokeho. Se ke oa sebelisa lisebelisoa tse ling kapa lisebelisoa tsa motlakase ho feta tse khothaletsoang.
| Odara No. | Ntho | Boholo baPhano | Bophahamo ba motlakase (-3dB) | Setšoantšo |
| feto-fetoha | Mefuta e fapaneng ea lipatlisiso tsa HSDP2000 | x | feto-fetoha |  |
| 890-880-105 | 2-Footer, e ntšo | x | n/a |  |
| 891-010-814 | Li-adapter tsa PCB, 10x | x | > 2.5 GHz |  |
| 890-800-001 | Litlhahiso tsa selemo, tse entsoeng ka khauta, 5x | x | > 2.5 GHz |  |
| 890-800-000 | Malebela a tiileng, a entsoeng ka khauta, 5x | x | > 2.5 GHz |  |
| 899-000-002 | SMD teko grabber, 1 Pair, tala / mosehla | x | > 0.6 GHz |  |
| 890-600-214 | Solder-In Adapter Flex PCB e nang le thapo ea Micro coax | x | > 1.2 GHz |  |
| 890-720-8A6 | Y-Lead-Adaptor, 0.8mm Socket to MMCX plug | x | > 1.5 GHz |  |
| 018-292-937 | Keletso Saver | x | > 2.2 GHz |  |
| 018-291-913 | Z-Ground, para e le 'ngoe | x | > 2 GHz |  |
| 018-291-914 | Keletso e sebetsang ea Probe Bent, para e le 'ngoe | x | > 1.5 GHz |  |
| 890-720-001 | Y-Lead ho 0.8mm socket bakeng sa tšebeliso le899-000-002 le 890-500-001 | x | n/a |  |
| 890-600-215 | Adapter ea UF.L e nang le thapo ea Micro coax | > 1.3 GHz |  |
|
| 890-720-002 | Y-Lead-R ho isa ho 0.8 mm socket, e lumellana leMicro SMD-Clip 972416100 | x | > 1.1 GHz |  |
Mohato oa 3: Lisebelisoa (E Tsoela Pele)
| Odara No. | Ntho | Sebakaea Phano | Bophahamo ba motlakase (-3dB) | Setšoantšo |
| 890-500-001 | QFP IC-Clips e telele, 1 Pair, e ntšo / e khubelu | x | > 0.6 GHz |  |
| 972416100 | Sekotwana sa Micro SMD | x | > 0.5 GHz |  |
| 890-010-912 | Lihlopha tsa matšoao 4 x 4 mebala | x | n/a |  |
| 890-400-808 | Bophahamo bo bolelele ba 7cm | x | n/a |  |
| 890-400-809 | Bophahamo bo bolelele ba 13cm | x | n/a |  |
| 890-520-900 | Thapo ea Phepelo ea Matla (0.5 m) | x | n/a |  |
| n/a | Setifikeiti sa Tekanyetso ea Fektheri | x | na |
Mohato oa 4: Khetha 3D Positioning System
Khetha e 'ngoe ea lisistimi tsa PMK's 3D probe positioning tse nang le sets'oants'o sa bokahohle. Matsoho le li-probe holders li boetse li tsamaisana le litsamaiso tsa boemo ba PMK's SKID bakeng sa li-probes le li-PCB, tse fumanehang hape bakeng sa maemo a mocheso ho tloha ho -55°C ho isa +155°C. Ho review litharollo tsohle tsa boemo ba 3D, etela rona ho www.pmk.de
| Odara No. | Ntho | Setšoantšo |
| 893-350-006 | Universal 3D Probe Positioner MSU1500 e nang le botlaaseng ba tšepe (893-100-001), letsoho le bophara ba span 200mm (893-200-200), le ts'oara probe ea bokahohleng (893-090-000) |  |
| 893-350-011 | Universal 3D Probe Positioner e nang le leoto la makenete (893-100- 004), letsoho le bophara ba span 200mm (893-200-200), e ts'oereng probe ea bokahohleng (893-090-000) |  |
| 893-500-QALA | SKID-S Starter Kit: 3U Board Tester (160 x 160mm) ho kenyeletsoa SKID vertical adapter kit (893-291-501), universal probe holder (893-090-000), PMK probe holder 5-12mm (893-050- 000) ), letsoho le bophara ba span 130 mm (893-200-130) le 200 mm (893-200-200) |  |
| 893-600-QALA | SKID-M Starter Kit: 6U Board Tester (240 x 160mm) ho kenyeletsoa SKID bethe ya adaptara kit (893-291-501), universal probe holder (893-090-000), PMK probe holder 5-12mm (893-050- 000) ), letsoho le bophara ba span 130 mm (893-200-130) le 200 mm (893-200-200) |  |
| 893-700-QALA | SKID-M Starter Kit: Board Tester (340 x 300mm) ho kenyeletsoa SKID vertical adapter kit (893-291-501), universal probe holder (893-090-000), PMK probe holder 5-12mm (893-050-000) , letsoho le bophara ba span 130 mm (893-200-130) le 200 mm (893-200-200) |  |
Fektheri Calibration
Ho khothaletsoa ho lekanya bocha selemo le selemo. Tekanyetso ea ISO 17025 nakong ea ho tlisoa kapa ha ho lekoa bocha ho tla khoneha ka kopo.
Moetsi
PMK Mess- und Kommunikationstechnik GmbH
Königsteiner Str. 98
65812 Bad Soden, Jeremane
Mohala: +49 (0) 6196 999 5000
Marang-rang: www.pmk.de
E-mail: sales@pmk.de
Tiisetso
PMK e fana ka tumello ea hore sehlahisoa sena se sebelisoe ka mokhoa o tloaelehileng le ts'ebetsong ka nako ea nako ea selemo ho tloha letsatsing leo se rometsoeng ka lona 'me e tla lokisa kapa e nke sebaka sa sehlahisoa leha e le sefe se nang le sekoli se sa kang sa senyeha ka lebaka la bohlasoa, tšebeliso e mpe, ho kenngoa ka mokhoa o sa lokelang, kotsi kapa tokiso e sa lumelloeng ke moreki. . Tiisetso ena e sebetsa feela bakeng sa mefokolo ka lebaka la thepa kapa moetso. PMK ha e fane ka litiisetso tse ling tse fanoang ke thekiso kapa ho ikoetlisa bakeng sa morero o itseng. PMK e ke ke ea ikarabella bakeng sa tšenyo efe kapa efe e sa tobang, e khethehileng, ea tšohanyetso, kapa ea litlamorao (ho kenyeletsoa litšenyehelo tsa tahlehelo ea phaello, tahlehelo ea khoebo, tahlehelo ea ts'ebeliso kapa data, tšitiso ea khoebo le tse ling tse joalo), leha PMK e elelitsoe ka monyetla oa ts'enyehelo e joalo e bakoang ke sekoli kapa phoso efe kapa efe bukeng ena kapa sehlahisoa.
Phatlalatso ea ho lumellana
PMK e phatlalatsa ho lumellana ha sehlahisoa sena le litekanyetso tsa sebele tse hlokehang tsa polokeho ho latela Vol VoltagTaelo ea e (LVD) 2014/35/EU:
CEI/IEC 61010-031:2015
- Litlhoko tsa polokeho bakeng sa lisebelisoa tsa motlakase bakeng sa ho lekanya, taolo le ts'ebeliso ea laboratori
- Karolo ea 031:
Litlhoko tsa polokeho bakeng sa likopano tse ts'oaroang ka letsoho bakeng sa ho metha le tlhahlobo ea motlakase
Litaelo tsa WEEE/ RoHS
Sehlahisoa sena sa elektroniki se khethiloe ka har'a lenane la sehlopha sa WEEE/RoHS e le lisebelisoa tsa ho beha leihlo le ho laola (sehlopha sa 9) 'me se latela Litaelo tse latelang tsa EC.
Litaelo tsa EC:
Taelo ea WEEE 2012/19 / EU
- Senya Thepa ea Motlakase le Elektronike
RoHS Directive 2011/65/EU
- Thibelo ea tšebeliso ea Lintho tse itseng tse Kotsi ho Thepa ea Motlakase le ea Elektronike
Thuso le matsapa a lona lia hlokahala ho sireletsa le ho boloka tikoloho ea rona e hloekile. Ka hona khutlisetsa sehlahisoa sena sa elektroniki qetellong ea bophelo ba sona ebang ke Lefapheng la rona la Tšebeletso kapa u itlhokomele ka bouena ka pokello ea WEEE le kalafo ea WEEE ea profeshenale. Se ke oa lahla joalo ka litšila tsa masepala tse sa hlophisoang.
Copyright © 2023 PMK - Litokelo tsohle li sirelelitsoe.
Boitsebiso bo hlahang khatisong ena bo nka sebaka sa litaba tsohle tse hatisitsoeng pele. Litlhaloso li ka fetoha ntle le tsebiso.
Litokomane / Lisebelisoa
 |
PMK HSDP Series High Speed Differential Probes le Universal BNC Interface [pdf] Buka ea Taelo HSDP2050, HSDP Series High Speed Differential Probes e nang le Universal BNC Interface, HSDP Series, High Speed Differential Probes e nang le Universal BNC Interface, e nang le Universal BNC Interface, BNC Interface |
