PATCHING PANDA POLOKA DIY Module
Tlhahisoleseding ya Sehlahiswa
Litlhaloso
- Kereiti: Mahareng
- Likaroloana: Likarolo tsa elektronike tse kopantsoeng esale pele, le likarolo tsa hardware li hloka ho kenngoa
- Boholo: Laola PCB ka li-spacers (2x11mm, 1x10mm)
- Tšebeliso: Kopano ea theknoloji e phahameng ea elektroniki
Litaelo tsa Tšebeliso ea Sehlahisoa
- Arola mola o lehlakoreng ka ho sotha likhoele tse hokahantsoeng ka ntle ho sebelisa pliers.
- Fumana 'me u behe li-spacers tsa tšepe ho PCB ea taolo joalokaha ho laetsoe.
- Hlahloba ho tsamaisana le ho solder voltage regulator, sehokelo sa motlakase, le li-trimmers.
- Ikopanye le li-PCB ka bobeli u sebelisa li-sockets tsa basali le banna, u li rekise, 'me u kenye li-sockets tse 2 × 13.
- Fokotsa leoto la fader ho thibela ho kopana le li-sockets tse kentsoeng.
- Khaola leoto la lehlakoreng la fader ho qoba lipotoloho tse khutšoane.
- Beha konopo 'me u e boloke ka tsela e nepahetseng ea polarity.
- Lisebelisoa tsa solder, tse siea leoto le le leng la slider le sa solder bakeng sa liphetoho.
- Netefatsa tekatekano ea selaete pele ho solder ea ho qetela.
- Hokela li-PCB ka bobeli, u li sireletse ka li-screw, 'me u kenye mini-PCB.
- Sheba buka ea mosebelisi bakeng sa litaelo tsa ho lekanya.
LBH
- P: Nka thibela tšenyo e tsoang ho Electrostatic Discharge (ESD) joang?
- A: Ipehele fatše pele u tšoara boto ea potoloho ka ho ama holim'a tšepe kapa ntho e theohileng fatše.
- P: A na nka fetola li-slider ka mor'a ho soasoa?
- A: Tlohela leoto le le leng la li-slider le sa solder qalong ho etsa hore litokiso li be bonolo pele ho soldering ea ho qetela.
Selelekela
MOEKETSI MAERE
- Ho kopanya mojule oa hau o mocha, latela mehato e fanoeng maqepheng a 'maloa a latelang.
- Ho kopanya mojule oa hau ho bonolo. Le hoja likarolo tsohle tsa elektronike li se li kopantsoe esale pele, u tla hloka ho kenya le ho boloka likarolo tsa hardware. Ho bohlokoa ho netefatsa hore likarolo tsohle tsa mochini li hokahane hantle 'me li behiloe ka nepo pele ho solder.
- Etsa bonnete ba hore u hlahloba habeli mokhoa oa karolo ka 'ngoe ho netefatsa hore tsohle li kentsoe ka nepo.
- Latela mohato o mong le o mong ka tatellano, 'me u tšoare likarolo ka hloko, kaha ke lisebelisoa tsa elektroniki tsa theknoloji e phahameng.
- Tlhokomeliso ka Electrostatic Discharge (ESD):
- Electrostatic discharge (ESD) e etsahala ha motlakase o sa fetoheng o hola le ho tsoa, joalo ka ts'isinyeho e nyane eo u ka e utloang ha u tšoara lemati la tšepe. ESD e ka senya likarolo tsa elektronike tse hlokolosi. Ho sireletsa potoloho ea module ea hau nakong ea kopano:
- Itšepe ka ho tšoara holim'a tšepe kapa ntho e theohileng fatše pele u tšoara boto ea potoloho.
Ho lokisetsa kopano
LATELA MEHATO ENA EA HO AHA KITI ENA
- Lokisetsa likarolo ho qala ts'ebetso ea kopano, 'me ka bonolo u arole mola o ka thōko ka ho sotha marapo a ka ntle a kopanyang ka ho sebelisa pliers.
- Fumana li-spacers tsa tšepe: ho na le tse tharo ka kakaretso - tse peli tse methang (2x11mm) le tekanyo e le 'ngoe (1x10mm).
- Beha li-spacers ho PCB ea taolo joalokaha ho bontšitsoe setšoantšong. Sebelisa li-spacers tse kholoanyane (2x11mm) ho hokela li-PCB ka bobeli le spacer e nyane (1x11mm) joalo ka ha ho bonts'itsoe setšoantšong.
- Sheba setšoantšo sa molumotage regulator, chebahalo ea sehokelo sa matla, le li-trimmers. Haeba tsohle li nepahetse, tsoela pele ho li rekisa sebakeng sa tsona.
- Kopana le li-PCB ka bobeli u sebelisa li-sockets tsa basali le banna, 'me u li rekise.
Ho feta moo, solder li-sockets tsa 2 × 13 joalo ka ha ho bonts'itsoe setšoantšong se ka ho le letona.
- Fokotsa leoto le lehlakoreng la fader le tla behoa haufi le li-sockets tse kentsoeng pele ho thibela ho kopana le ho qoba potoloho e khutšoanyane. Sheba setšoantšo se latelang bakeng sa tataiso.
- Khaola leoto le lehlakoreng la fader le tla behoa haufi le lithapo tse kileng tsa rekisoa ho thibela ho kopana le ho qoba potoloho e khutšoanyane. Sheba setšoantšo se latelang bakeng sa tataiso.
- Setšoantšo se bontša kamoo leoto la lehlakoreng la fader le sa ameng liphahlo tse rekisoang.
- Beha konopo, ho netefatsa hore polarity e nepahetse. Lokisetsa! ka lehlakoreng la konopo e ka letsohong le letšehali le lehlakoreng le bontšitsoeng setšoantšong.
Kenya lisebelisoa tsohle 'me u sireletse phanele sebakeng ka li-screw, empa u se ke oa solder.
- Solder hardware, ntle le e 'ngoe ea maoto a ka tlaase a li-slider.
Sena se tla etsa hore ho be bonolo ho li lokisa ha ho hlokahala.
- Netefatsa hore li-slider li hlophisitsoe hantle le hore maoto a tsona a ama PCB hantle pele o tsoela pele ka solder.
- Hokela li-PCB ka bobeli 'me u li sireletse ka li-screw. Kenya mini-PCB lehlakore le tšoailoeng le shebile ka ho le letšehali.
Ha u qetile, sheba bukana ea mosebelisi ho ithuta ho hlophisa mojule.
Litokomane / Lisebelisoa
 |
PATCHING PANDA POLOKA DIY Module [pdf] Buka ea Taelo HO PHAHAMA, HO PHAHAMA DIY Module, DIY Module, Mojule |