RKP - CMU 1
1U Rack Mountable Control le Monitor Unit
RKP-CMU1 1U Rack Mountable Control le Monitor Unit
Likaroloana
- 1 U pro e tlasefile/ 19-inch rack e khonang
- LCD e ka pele le likonopo bakeng sa ts'ebeletso ea setšeng ntle le PC
- USB-, RS-232 kapa Ethernet interface bakeng sa khokahanyo ea PC sebakeng sa heno kapa ho beha leihlo le ho laola hole ka modem ea GSM.
- Lethathamo la alamo / ketsahalo le nako le letsatsi
- Windows-based PC puisano software
- Likhokelo tse bonolo tsa terata ka lehlakoreng le ka morao
- Liphetho tse 4 tse ka fetolehang tsa mosebelisi bakeng sa tlhahlobo kapa temoso ea setso
- Waranti ea lilemo tse 5
Lisebelisoa
- Boiketsetso ba indasteri
- Sistimi ea kaho ea matla e ajoang
- Tharollo e se nang mohala/mohala
- Sistimi ea motlakase e sa feleng
- Sistimi ea tjhaja ea koloi ea motlakase
- Mohloli oa kamehla oa tsamaiso ea hona joale
GTIN KHOUTU
MW Search: https://www.meanwell.com/serviceGTIN.aspx
Tlhaloso
RKP-CMU1 ke yuniti e felletseng ea taolo / leihlo bakeng sa sistimi ea matla ea RKP-1U. E na le USB, RS-232, le interface ea ethernet, e ka hokela sebakeng sa heno ho PC ho etsa mesebetsi ea taolo le ho beha leihlo. Ka likhokahano tse 4 tse lokisehang tsa relay, basebelisi ba ka khona ho lekola liketsahalo tse itseng kapa lialamo mme ba nke khato e nepahetseng.
Moetso oa khouto ea mohlala
Hlokomela: Ka lebaka la bothata ba ho lumellana pakeng tsa firmware ea khale le e ncha ea RKP-CMU1 le PSU, ha u khetha Rack PSU, ka kopo ela hloko ntlafatso ea firmware ea PSU le RKP-CMU1. Lintlha ka kopo sheba bukana ea mosebelisi ea RKP-CMU1.
TS'ELISO
| MOHLALA | RKP-CMU1 | RKP-1U❑ -CMU1 | |
| SEHLOOHO | DIGITAL METER Ela hloko.6 | Hlahisa molumo oa motlakase oa DCtage, hona joale, le mocheso oa ka hare | |
| SEPHEO SA LAOLI Tlhokomeliso.6 | Letšoao la PMBus | ||
| SETSEBISO SA LED | Botala: Matla a Makhubelu: Alamo | ||
| PHEELLO KHOATSO | Relay e 4 e ka fetolehang ea mosebelisi, boemo ba ho ikopanya le relay(max.): 30V/1A e hanyetsa | ||
| KEKETSO | TLHOKOMELOTAGE RANGE Hlokomela. 3 | 12 - 15VDC | |
| KHABANE | 1A112VDC 0.8A/15VDC | ||
| LIPELETSO TSA HO HLOKOMELA Temoso.6 | Letšoao la PMBus | ||
| MOSEBETSI | BONTŠA | LCD 16 × 2 Alphanumeric Matrix Pontšo / PC Web Pontšo ea leqephe | |
| MONITORI | Khumo Voltage! Lata Hona Joale! Mocheso! Kenyeletso Moqtage | ||
| TAolo | Khumo Voltage, Moeli oa Hona Joale, ON/OFF | ||
| COMM. SEBAKATSO | USB, RS-232, Ethernet | ||
| MOHLALA TŠEBELETSO | RCP-1600, RCP-2000, DRP-3200 | RCP-2000 | |
| TIKOLOHO | MOSEBETSI TEMPELA. Hlokomela.1 | -25 -+70°C | |
| MOSEBETSI MOKOBELO | 20 - 90% RH e sa konkanyeng | ||
| POLOKO TEMP., MONATE | -40 - +85t, 10 - 95% RH e sa koaheleng | ||
| TSIETSO | 10 - 500Hz, 2G 10min./1cycle, 60min. e 'ngoe le e 'ngoe e bapile le lilepe tsa X, Y, Z | ||
| TŠIRELETSO & EMC (Tlhaloso ea 4) |
TS'IRELETSO MAEMO | EAC TP TC 004 e amohetsoe, moralo o bua ka TUV BS EN/EN62368-1 | UL62368-1, CSA C22.2 No. 62368-1,TUV BS EWEN62368-1, EACTPTC 004 e amohelehile |
| EMELANG KOLOKOTAGE Note.2 | 01P-FG: 0.7KVDC | 1/P-01P:3KVAC 11P-FG:2KVAC 0/P-FG:0.7KVDC | |
| HO ITŠOA HO KHANYETSA TENG Tlhokomeliso.2 | 0/P-FG: 100M Ohms / 500VDC ! 25°C! 70% RH | 1/P-011), I/P-FG,O/P-FG:100M Ohms / 500VDC / 25t/ 70% RH | |
| EMC TS'ISITSO | Ho lumellana le BS EN/EN55032 (CISPR32) Sehlopha sa ho khanna B, Sehlopha sa Mahlaseli A; BS EN/EN61000-3-2,-3, EAC TP TC 020 | ||
| TSIETSI EMC | Ho lumellana le BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN1EN61000-6-1(BS EN/EN50082-2), BS EN/EN55035, boemo ba indasteri e bobebe, EAC TP TC 020 | ||
| BA BANG | MTBF | 671.5K lihora tsa mots. Telcordia SR-332 (Bellcore); 110.5K lihora tsa mets. MIL-HDBK-217F (25°C) | |
| TŠEBELETSO | 147.5*127*41mm (L*W*H) | 350.8*483.6*44mm (L*W*H) | |
| PAKA | 0.8Kg; 16pcs / 13.8Kg / 0.79CUFT | 4.4Kg; 3pcs/14.2Kg12.67CUFT | |
| HLOKOMELA | 1.LCD e ka hoama ka tlase ho -10t . 2.SK100 le lihokelo tsohle tsa matšoao (ntle le CN502, CN503, le boema-kepe ba USB) li nkuoa e le 0/P. 3.Tšebeliso e khothalelitsoeng MEAN WELL letoto la adaptara ea matla: GS12, GS15, GS18, GE12, GE18, GST18. 4.Motlakase o nkoa e le karolo e tla kenngoa ka har'a thepa ea ho qetela. Liteko tsohle tsa EMC li entsoe ka ho kenya yuniti holim'a poleiti ea tšepe ea 720mm * 360mm e nang le 1mm ea botenya. Thepa ea ho qetela e tlameha ho netefatsoa hape hore e ntse e kopana le litaelo tsa EMC. Bakeng sa tataiso ea ho etsa liteko tsena tsa EMC, ka kopo sheba "EMI tlhahlobo ea lisebelisoa tsa motlakase." (joalokaha e fumaneha ho http://www.meanwellcom) 5.Thempereichara e fokotsehileng ea 3.5°C/1000m e nang le mefuta e se nang fan le ea 5°C/1000m e nang le mefuta ea fene bakeng sa bophahamo ba ho sebetsa ho feta 2000m(6500ft). 6.Ka kopo, sheba lintlha tse fapaneng tsa mefuta ea PSU bakeng sa palo e phahameng ka ho fetisisa eo RKP-CMU1 e ka e laolang le ho e beha leihlo. * Boitlhotlhollo ba Boikarabelo ba Sehlahisoa: Bakeng sa tlhaiso-leseling e batsi, ka kopo sheba ho https://www.meanwell.com/serviceDisclaimeraspx |
||
Buka ea mosebetsi
- Khokahano ea puisano
RKP-CMU1 e khona ho laola le ho hlokomela likarolo tsa likarolo tsa matla ka puisano ea PMBus, 'me PC e khona ho laola tsamaiso eohle ka ho sebelisa USB, RS232, kapa Ethernet ho hokahanya le RKP-CMU1.
PMBus: RKP-CMU1 e ts'ehetsa PMBus Rev. 1.1 ka lebelo le phahameng la 100KHz, e lumellang ho baloa ha tlhahisoleseling, ho beha leihlo boemo le ho fokotsa tlhahiso. Ho fumana lintlha, ka kopo sheba Buka ea ho Instola.
- Tlhokomelo le taolo
RKP-CMU1 e khona ho beha leihlo litekanyo tsa likarolo tsa motlakase joalo ka bophahamo ba modumotage, tlhahiso ea hona joale, mocheso oa ka hare, boemo, nomoro ea serial, le mofuta oa firmware. E ka boela ea bulela/ tima liyuniti tsa motlakase hammoho kapa ka thoko ka ho sebelisa phini ea "ON/OFF' ho CN500 kapa PMBus "CONTROL" ho taelo ea JK1 kapa PMBus 'OPERATION", e hlahang ka tlase. Ka ho sebelisa PMBus, tlhahiso ea voltagTšireletso ea e le ho feta mojaro oa likarolo tsa motlakase lia fetoha. Ka kopo sheba Buka ea ho Instola. - Oache ea nako ea 'nete, Log ea data le Log ea Ketsahalo
RKP-CMU1 e na le data ea oache ea nako ea 'nete ho bonts'a letsatsi / nako le nako ea ho kena.amp. Setsi sa data se etselitsoe ho boloka data ea ts'ebetso ha litsamaiso li sebetsa. E na le li-recode tse 1000 'me nako ea log e ka lokisoa ho tloha ho 1 ho isa ho metsotso e 60. Boemo ba sistimi ea polokelo ea liketsahalo ha alamo e hlaha le ho e tlosa. Ho na le lirekoto tse 600 lethathamong la liketsahalo. - Relay e hlophisitsoeng
Ho na le li-relay tse 4 'me letlapa le leng le le leng le na le khokahano e tloaelehileng e bulehileng, e haufi le e tloaelehileng sebakeng sa terminal. Maemo a bona a sebetsang a ka sebelisoa habonolo, joalo ka taolo ea tjhaja le jenereithara.
| Mosebetsi | Mosebetsi-potlana | PSU | Paramethara |
| Alamo | 1 Alamo efe kapa efe 2.0VP 3.0LP 4.Potoloho e khutšoanyane 5.0TP 6.Mocheso o Phahameng 7.AC hloleha 8.Fan loko Phoso ea 9.PMBus |
N/A | N/A |
| PSU ON | 1.1 hang-hang | PSUO-31 | 0 metsotsoana. |
| 2.Ho lieha | 1 - 600 sec. | ||
| PSU TLHOKOMELA | 1.1 hang-hang | PSUO-31 | 0 metsotsoana. |
| 2.Ho lieha | 1 - 600 sec. | ||
| Kenyelletso ea dijithale | D-IN1 – D-1N4 | N/A | N/A |
※ IN/OUT Connector Pin No. Assignment(CN500) : D-Type Right Angle 25 maemo
| Pin No. | Mosebetsi | Tlhaloso |
| 1,7 | BONAHALA/TSHA | Yuniti e 'ngoe le e 'ngoe e ka bulela le ho tima sehlahisoa ka thoko ka lets'oao la motlakase kapa kopano e omileng lipakeng tsa ON/OFF A,B(pin 1,7) le +5V-AUX(pin 13). Khutšoane: BUTSE, Bula: OFF. (Hlokomela.2) |
| 2,8 | AC-OK | Tlase : Ha phallo ea molumotage ke 1 87Vrms. Phahameng : ha ho kenya voltage ka 75Vrms. (Hlokomela.2) |
| 3,9 | DC-OK | Phahameng : Ha Vout 80±5%. Tlase : Ha Vout -:= 80±5%. (Hlokomela.2) |
| 4,10 | PV | Khokahano bakeng sa tlhahiso ea voltage ho fokotsa. Molumotage ka fokotsoa ka har'a mefuta e hlalositsoeng. (Hlokomela.1) |
| 5,11 | T-ALARM | Holimo : Ha mocheso oa ka hare (TSW1 kapa TSW2 o bulehile) o feta moeli oa alamo ea mocheso. Low : Ha mocheso oa ka hare (TSW1 kapa TSW2 o khutšoanyane) tlas'a mocheso o lekanyelitsoeng. (Hlokomela.2) |
| 6,12 | MOTLATSI FOSA | Phahameng : Ha fan ea ka hare e hlōleha. Low : Ha fan ea ka hare e tloaelehile. (Hlokomela.2) |
| 13 | +5V-AUX | Auxiliary voltage tlhahiso, 4.5 — 5.5V, e boletsoeng ho GND-AUX (pin 15). Boemo bo phahameng ba hona joale ke 0.3A. Sehlahisoa sena se na le "Oring diode" e hahiloeng ka hare 'me ha e laoloe ke taolo ea hole ea ON/OFF. |
| 14 | +12V-AUX | Auxiliary voltage tlhahiso, 10.8 —13.2V, e boletsoeng ho GND-AUX (pin 15). Boemo bo phahameng ba hona joale ke 0.8A. Sehlahisoa sena se na le "Oring diode" e hahiloeng ka hare 'me ha e laoloe ke taolo ea hole ea ON/OFF. |
| 15 | GND-AUX | Auxiliary voltagle tlhahiso ea GND. Ho khutla ha lets'oao ho qheletsoe ka thoko ho li-terminals tsa tlhahiso (+V & -V). |
| 16-21 | NC | Ha e sebelisoe. |
| 22 | +S | Kutlo e ntle. Letšoao la + S le lokela ho hokahanngoa le terminal e ntle ea mojaro. Lieta tsa +S le -S li lokela ho sothoa ka bobeli ho fokotsa phello ea ho phahamisa lerata. Matšeliso a phahameng a ho theoha ha line ke 0.5V. |
| 23 | S | Kutlo e mpe. Letšoao la -S le lokela ho hokahanngoa le terminal e mpe ea mojaro. Lieta tsa -S le +S li lokela ho sothoa ka bobeli ho fokotsa phello ea ho phahamisa lerata. Matšeliso a phahameng a ho theoha ha line ke 0.5V. |
| 24 | +V(pontšo) | Positive output voltage. Bakeng sa ts'ebeliso ea selehae feela, ha e khone ho hokahana ka kotloloho le mojaro. |
| 25 | -V (mosupo) | Negative output voltage. Bakeng sa ts'ebeliso ea selehae feela, ha e khone ho hokahana ka kotloloho le mojaro. |
※ IN/OUT Connector Pin No. Assignment(JK1) : RJ45 8 maemo
| Pin No. | Mosebetsi | Tlhaloso |
| 1,2 | DA,DB | Letšoao le fapaneng la dijithale bakeng sa taolo e ts'oanang. (Hlokomela.1) |
| 3 | -V (mosupo) | Negative output voltage. Bakeng sa taolo e ts'oanang, e ke ke ea hokahana ka kotloloho ho mojaro. |
| 4 | TAolo | Remote ON/OFF Pin ea taolo e sebelisitsoeng sebopehong sa PMBus. (Hlokomela.2) |
| 5 | NC | Ha e sebelisoe. |
| 6 | SDA | Lintlha tsa Serial tse sebelisoang ho sehokelo sa PMBus. (Hlokomela.2) |
| 7 | SCL | Sebapali Clock se sebelisitsoeng sebopehong sa PMBus. (Hlokomela.2) |
| 8 | GND-AUX | Auxiliary voltagle tlhahiso ea GND. Ho khutla ha lets'oao ho qheletsoe ka thoko ho li-terminals tsa tlhahiso (+V & -V). |
Tlhokomeliso.1: Letšoao le sa khetholleng, le lebisitsoeng ho -V(signal).
Tlhokomeliso.2: Letšoao le ikhethileng, le lebisitsoeng ho GND-AUX.
※ IN/OUT Connector Pin No. Assignment(CN502) : D-type Male 9 maemo
| Pin No. | Mosebetsi | Tlhaloso |
| 1,4,6,7,8,9 | NC | Ha e sebelisoe. |
| 2 | RXD | Pin ea ho amohela data ea RS-232 interface. |
| 3 | TXD | Pin ea ho fetisa data ea RS-232 interface. |
| 4 | GND-FG | RS-232 GND e tloaelehileng. Letšoao lena le hokahana le FG 'me le arohane le -V le GND-AUX. |
※ Nomoro ea Pin ea Khokahano ea IN/OUT (CN503) :HRS DF11-8DP-2DS kapa e lekanang le eona
| Pin No. | Mosebetsi | Tlhaloso |
| 1,3,5,7 | D-IN1 D-IN2 D-IN3 D-IN4 | Letšoao le ikhethileng la dijithale le kenyellelitsoeng ho GND-FG. Bula ho tloha ho GND-FG kapa -F5V : Kenyeletso ea "1" ho RKP-CMU1 e khuts'oane ho ea ho GND-FG kapa OV : Kenyeletso ea "0" ho RKP-CMU1 |
| 2,4,6,8 | GND-FG | GND e tlwaelehileng bakeng sa D-IN. Letšoao lena le hokahana le FG 'me le arohane le -V le GND-AUX. |
※ Nomoro ea Pin ea Mohokahanyi oa IN/OUT. Kabelo(JK500) :RJ45 8 boemo
| Pin No. | Mosebetsi | Tlhaloso |
| 1,2 | TX+/TX- | Fetisetsa data e sebelisoang ho sehokelo sa Ethernet. |
| 3,6 | RX+/RX- | Fumana data e sebelisitsoeng ho sehokelo sa Ethernet. |
| 4,5,7,8 | NC | Ha e sebelisoe. |
※ Nomoro ea Pin ea Sehokahanyi ea IN/OUT(TB4) :DECA MX422-25412 kapa e lekanang le eona
| Pin No. | Mosebetsi | Tlhaloso |
| 1,4,7,10 | Relay-NO | Khokahano e tloahelehileng e bulehileng ea relay e reriloeng. |
| 2,5,8,11 | Relay-NC | Khokahano e haufi-ufi ea li-relay tse hlophisehang. |
| 3,6,9,12 | Relay-COM | E tloaelehileng bakeng sa puisano ea NO/NC. |
Hlokomela: Relay contact Rating (max.) : 30Vdc/1A resistive.
※ IN/OUT Connector Pin No. Kabelo(SK100): Schurter 4840.2201 kapa e lekanang
| Pin No. | Mosebetsi | Tlhaloso |
| 1 | +VIN | Positive input voltage bakeng sa RKP-CMU1. |
| 2 | - VIN | Negative input voltage bakeng sa RKP-CMU1. |
File Lebitso: RKP-CMUl-SPEC 2022-08-08
Litokomane / Lisebelisoa
 |
HO BOLELA HAHOLO RKP-CMU1 1U Rack Mountable Control le Monitor Unit [pdf] Buka ea Mong'a RKP-CMU1 1U Rack Mountable Control and Monitor Unit, RKP-CMU1, 1U Rack Mountable Control le Monitor Unit, Mountable Control and Monitor Unit, Control and Monitor Unit, Monitor Unit |