Bolela Hantle IDPV-65 65W PWM Output LED Driver User Manual

Letoto la IDPV-65 ke 65W PCB mofuta oa AC/DC LED mokhanni o nang le molumo o sa feleng.tagmoralo oa tlhahiso ea mokhoa oa PWM. IDPV-65 e sebetsa ho tloha ho 180-295VAC 'me e fana ka mefuta e nang le mefuta e fapaneng ea litekanyetsotagho tloha 12V ho 60V. Ka lebaka la ts'ebetso e phahameng ea ho fihla ho 90%, ka moralo o se nang fan, letoto lohle le khona ho sebetsa bakeng sa -20 C-+40 C mocheso oa mocheso tlas'a convection ea mahala ea moea. IDPV-65 e na le likhetho tse fapaneng tsa ts'ebetso, joalo ka mekhoa ea ho fifala, e le ho fana ka meralo e bonolo bakeng sa lisebelisoa tsa mabone a LED.

Moetso oa khouto ea mohlala

Mofuta	Mosebetsi
Ha ho letho	2 ho 1 ho fifala ha 0 (10-10VDC le XNUMXV PWM)
A	2 ho 1 dimming le Auxiliary DC tlhahiso

TS'ELISO

MOHLALA		IDPV-650-12	ippv.650-24		EA-6036-DPV		IDPV-6C-48		IDPV-61:1-60
SEHLOOHO	DC VOLTAGE	12V	24V		36V		48V		60V
	RETŠELISITSOE NKHOANE	4.2A	2.4A		1.8A		1.35A		1.08A
	REKETSO MATLA	50.4W	57.6W		64.8W		64.8W		64.8W
	LIEKETSENG DIMM	0-100%
	TLHOKOMELOTAGE MAMELLO	± 10%
	MAIKETLO A PWM (Mofuta.)	1KFtz(± 20%)
	HO HLOMELA NAKO Ela hloko.3	500ms /230VAC
	MOTLATSI DC SEHLOOHO Nob/	Nominal 12V(ho kheloha 11.4-12.6)@50mA forA-Type feela
KEKETSO	TLHOKOMELOTAGE RANGE Hlokomela. 2	180 - 295VAC 254 - 417VDC (Ka kopo, sheba karolo ea 'STATIC CHARACTERISTIC')
	MOEKETSENG MAKOANE	47 - 63Hz
	POWER FACTOR crypt.)	PF>0.95/230VAC, PF>0.9/277VAC@moroalo o felletseng (Ka kopo, sheba karolo ea 'POWER FACTOR (PF) CHARACTERISTIC')
	PHETHAHETSO EA HARMONIC	THD< 20%(@loadM0%/230VAC; @load.475%/277VAC) (Ka kopo, sheba karolo ea “TOTAL HARMONIC DISTORTION')
	KATLEHO (Mofuta.)	85%		I87%		I88%		I89%		I90%
	AC CURRENT (Mofuta.)	0.4A/230VAC 0.3A/277VAC
	INRUSH CURRENT(Mofuta.)	COLD QALA 30A(twidth=270ps e lekantsoe ho 50% (tlhōrō) ho 230VAC: Ka NEMA 410
	MAX. Nomoro ea li-PSU ho 16A CIRCUIT MOHLOMI	32 diyuniti (sekhechana sa potoloho ea mofuta oa B)/ 32 diyuniti (sekhechana sa potoloho ea mofuta oa C) ho 230VAC
	LEAKAGE NKHOANE	<0.75mA/277VAC
	HA HO MOJARO TSEBE	<0.5W
TS'IRELETSO	POTOLOHO E KHUTSOANE	Koala 0 / P voltage, tsosolosa matla a ho hlaphoheloa
	NTHAKOANE	105 -115%
		Mofuta oa ts'ireletso: Mokhoa oa Hiccup, o hlaphoheloa ka bohona kamora hore boemo ba phoso bo tlosoe
TIKOLOHO	MOSEBETSI TEMPELA.	Ta=-20 – +40 C (Ka kopo sheba karolo ea” OUTPUT LOAD vs TEMPERATURE')
	MOSEBETSI MOKOBELO	20 - 90% RH e sa konkanyeng
	POLOKO TEMP., MONATE	-40 - +80^°C, 10 - 95% RH
	MOEKETSI. TIISETSO MOKHOA	±0.03%/C (0 – 40^°C)
	TSIETSO	10 - 500Hz, 2G 10min./Tricycle, nako ea 60min. e 'ngoe le e' ngoe e ipapisitse le lilepe tsa XY Z
TŠIRELETSO LE EMC	TS'IRELETSO MAEMO	UL8750.CSA C22.2 NO.250.13-12;ENEC EIS EN/ EN61347-1 & BS EN!EN61347-2-13 e ikemetseng, BS EN!EN62384e amohetsoe
	EMELANG KOLOKOTAGE	I/P-0/P:3.75KVAC
	HO IKAOA KHANYETSO	I/P-0/P: 100M Ohms / 500VDC / 25^°Ke 70% ea RH
	EMC TS'ISITSO	Ho lumellana le BS EN/E N55015, BS EN/EN61000-3-2 Sehlopha sa C (tRbad:=60%); TS EN/EN61000-3-3
	TSIETSI EMC	Ho lumellana le BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547.1boemo ba indasteri (boitširelo bo matla: Lthe-Line:1KV)
BA BANG	MTBF	3720.1K lihora tsa mots. Telcordia SR-332 (Bellcore); 398.8K lihora tsa mots. MIL-HDBK-217F (25^°C)
	TŠEBELETSO	130'67.5'22mm (L'IN*F1)
	PAKA	0.15Kg;81pcs/13Kg/ 1.46CUFT
HLOKOMELA	1. Litekanyetso tsohle HA li boleloe ka ho khetheha re li lekanyelitse ho 230VAC input, rated current, le 25'C ea mocheso o tikolohong. 2. Ho ka 'na ha hlokahala hore u hlakole tlas'a phallo e tlaase ea voltages. Ka kopo, sheba lintlha tsa tar tsa 'STATIC CHARACTERISTIC'. 3. Bolelele ba nako ea ho seta bo lekanngoa ha ho qala ho bata. Ho bulela OWOFF mokhanni ho ka lebisa keketsehong ea ho seta nako. 4. Aux. 12V e tla senyeha ka potoloho e khutšoanyane E ke ke ea fumaneha ka dimming off kapa tlhahiso ha e na boemo ba mojaro. 5. The (Sebete se nkuoa e le karolo e tla sebetsoa hammoho le lisebelisoa tsa ho qetela Kaha ts'ebetso ea EMC e tla ameha. by kemiso e felletseng. baetsi ba lisebelisoa tsa ho qetela ba tlameha ho etsa hore EMC Directive e tšoanelehe ho kengoa ka botlalo hape. ※ Boitlhotlhollo ba Boikarabelo ba Sehlahisoa: Bakeng sa tlhaiso-leseling e batsi, ka kopo sheba ho https://www.meamwell.con/servicedisclaimer.aspx

MOSEBETSI OA DIMMING

※ Molao-motheo oa dimming bakeng sa tlhahiso ea setaele sa PWM

Ho fifala ho fihlelleha ka ho fapanya potoloho ea mosebetsi oa sehlahisoa sa hajoale.

※ 2 ho ts'ebetso e le 'ngoe ea ho fifatsa
◎ Ho sebelisa tlatsetso 0 ~ 10VDC

◎ Ho sebelisa lets'oao la tlatsetso la 10V PWM (maqhubu a maqhubu a 300Hz~3KHz):

Hlokomela

Min. mosebetsi oa potoloho ea tlhahiso ea hona joale ke hoo e ka bang 8% le tlhahiso ea hona joale ha e hlalosoe ha 0% <Iout <8%.

Mosebetsi oa potoloho ea tlhahiso ea hona joale o ka theohela ho 0% ha tlhahiso ea dimming e ka ba 0Vdc kapa 10V PWM lets'oao le 0% ea potoloho ea mosebetsi.
Ho netefatsa phello ea ho fifala, matla a felletseng a tlameha ho feta 45W ho 100% potoloho ea mosebetsi.

OUTPUT LOAD vs TEMPERATURE

TŠOANELO STATIC

※ De-rating e ea hlokahala tlas'a phallo e tlase ea voltage.

MATLA (PF) TŠEBELETSO

PUSELETSO EA TSOHLE EA HARMONIC (THD)

※ 60V Model

KATLEHO vs MOJARO
Letoto la IDPV-65 le na le ts'ebetso e phahameng ea ho sebetsa hoo ho ka fihlellehang ho fihla ho 90% lits'ebetsong tsa masimong.
※ 60V Model