M5 STACK Flow Connect Software 

TLHOKOMELO

The Flow Connect ke molaoli oa indasteri o kopantsoeng haholo o etselitsoeng maemo a rarahaneng a boiketsetso le a puisano. E na le microcontroller ea ESP32-S3R8 mokokotlong oa eona, e nang le processor ea li-dual-core Xtensa LX7 e sebetsang ho fihla ho 240MHz, 'me e kenyelletsa 8MB PSRAM le 16MB FLASH memori, e khonang ho sebetsana le litlhoko tsa lik'homphieutha tse sebetsang hantle le tse ngata. Bakeng sa polokelo, e sebelisa 128Mbit (16MB) 3.3V NOR flash, e netefatsang ts'ebetso ea nako e telele, e tsitsitseng bakeng sa firmware, data, le tlhophiso. file polokelo.
Taolo e ts'ehetsa liprothokholo tse ngata tsa puisano, ho kenyeletsoa libese tse peli tsa CAN, RS232, RS485, le li-interface tsa TTL, e leng se etsang hore e tšoanelehe bakeng sa lits'ebetso tse fapaneng tsa indasteri le IoT. Ho ntlafatsa tšebelisano ea basebelisi, Flow Connect e kopanya taolo ea mabone ea Neopixel RGB ea LED, e nolofalletsang mebala e khanyang le litlamorao tsa mabone bakeng sa maikutlo a hlakileng a pono.
Ntle le moo, sistimi ea taolo ea matla ea Flow Connect e sebelisa li-converter tse ngata tsa DC-DC tse tšehetsang mefuta e fapaneng ea voltage lihlahisoa ho tloha 12V ho 3.3V. E boetse e na le likarolo tse hahiloeng ka li-fuse tsa elektroniki (eFuse) ho sireletsa molumo o mong le o mongtage channel ho tloha overcurrent, ho etsa bonnete ba tshebetso e sireletsehileng esita le libakeng tse thata.
Flow Connect e entsoe ka litlhoko tse boima tsa taolo ea indasteri, lipalangoang tse bohlale, le lits'ebetso tsa heke tsa IoT ka kelellong, tse fanang ka puisano e tšepahalang ea multiprotocol, polokelo ea data e matla, ponts'o e matla ea RGB, le ts'ireletso e felletseng ea matla.

Phalla Connect

1. Matla a Puisano:
   • Molaoli ea ka Sehloohong: ESP32-S3R8
   • Puisano e senang Wireless: Wi-Fi (2.4 GHz), Bluetooth Low Energy (BLE) 5.0
   • Dual CAN Bus: E ts'ehetsa libaka tse peli tsa libese tsa CAN bakeng sa puisano e tšepahalang ea data tikolohong ea indasteri.
   • Puisano ea serial: RS232, RS485, le li-interface tsa TTL bakeng sa likhetho tse fapaneng tsa likhokahano tsa mehala.
2. processor le Tshebetso:
   • Mohlala oa processor: Xtensa LX7 Dual-core (ESP32-S3R8)
   • Bokhoni ba polokelo: 16MB Flash, 8MB PSRAM
   • Maqhubu a Ts'ebetso: Xtensa® dual-core 32-bit LX7 microprocessor, ho fihla ho 240 MHz
3. Pontšo le Kenyo:
   • RGB LED: E kopantsoeng le Neopixel RGB LED bakeng sa maikutlo a matla a pono.
4. Sehopotso:
   • NOR Flash: 128Mbit (16MB), 3.3V bakeng sa firmware le polokelo ea data.
5. Taolo ea Matla:
   • Phepelo ea Matla: Li-converter tsa DC-DC tse tšehetsang liphetho tsa 12V ho isa ho 3.3V.
   • Tšireletso: Li-fuse tsa elektroniki tse hahelletsoeng ka har'a (eFuse) bakeng sa ts'ireletso ea overcurrent ho voltage likanale.
6. Lithako tsa GPIO le li-interfaces tse ka khonehang:
   1. Grove Interface: E tšehetsa khokahano le katoloso ea li-sensor tsa I2C le li-module tse ling.
7. Tse ling:
   • Sehokelo sa Onboard: Sehokelo sa mofuta oa C bakeng sa ho etsa mananeo, phepelo ea motlakase le likhokahano tsa serial.
   • Boima ba 'mele: 60*60*15 limilimithara

LIEKETSENG TS'OANELO

Parameter le tlhaloso	Boleng
MCU	ESP32-S3R8@ Xtensa dual - core 32-bit LX7, 240MHz
Bokhoni ba Puisano	Wi-Fi, BLE, Dual CAN Bus, RS232, RS485, TTL
Phepelo Voltage	12V ho isa ho 3. 3V DC (ka li-converter tsa DC-DC)
Bokhoni ba polokelo ea Flash	16MB Flash
PSRAM Bokhoni ba ho boloka	8MB PSRAM
NOR Flash	GD25Q128/ W25Q128, 128 Mbi t (16MB), 3. 3V
RGB LED	6 x Neopixel RGB LEDs bakeng sa mabone a matla
Sebopeho sa Katoloso	Sehokelo sa Grove bakeng sa ho hokahanya le ho holisa li-sensor tsa I2C
Mocheso oa ho sebetsa	0 ° C - 40 ° C
Wi-Fi Working Frequency	802. llb/ g/ n: 2412 MHz – 2482 MHz
BLE Nako ea ho sebetsa	2402 MHz - 2480 MHz
Moetsi	M5Stack Technology Co., Ltd

PHAKAMATSO

Pele o etsa mohato ona, sheba sengoloa sehlomathisong sa ho qetela: Ho kenya Arduino

Hatisa lintlha tsa WiFi

1. Bula Arduino IDE (Sheba ho
   https://docs.m5stack.com/en/arduino/arduino_ide bakeng sa tataiso ea ho kenya bakeng sa boto ea nts'etsopele le software)
2. Khetha boto ea ESP32S3 DEV Module le boema-kepe bo lumellanang, ebe u kenya khoutu
3. Bula sebali sa serial ho bonts'a WiFi e hlahlobiloeng le tlhahisoleseling ea matla a lets'oao
   
   

Hatisa lintlha tsa BLE

1. Bula Arduino IDE (Sheba ho
   https://docs.m5stack.com/en/arduino/arduino_ide bakeng sa tataiso ea ho kenya bakeng sa boto ea nts'etsopele le software)
2. Khetha boto ea ESP32S3 DEV Module le boema-kepe bo lumellanang, ebe u kenya khoutu
3. Bula sebali sa serial ho bonts'a BLE e hlahlobiloeng le tlhaiso-leseling ea matla
   
   

Tlhokomeliso ea FCC

Tlhokomeliso ea FCC: 

Liphetoho life kapa life tse sa amoheloeng ka kotloloho ke mokha o ikarabellang bakeng sa tumellano li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.
Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

1. Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi, le
2. sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

TLHOKOMELISO EA BOHLOKOA:

Hlokomela: Thepa ena e lekoa 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo.
Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ea seea-le-moea kapa kamohelo ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:

• Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
• Eketsa karohano pakeng tsa thepa le moamoheli.
• Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
• Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.

Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a FCC e behiloeng bakeng sa tikoloho e sa laoleheng. Thepa ena e lokela ho kengoa le ho sebetsoa ka sebaka sa bonyane 20cm lipakeng tsa radiator le 'mele oa hau.

Ho kenya Arduino

• Ho kenya Arduino IDE (https://www.arduino.cc/en/Main/Software) Tobetsa ho etela ofisiri ea Arduino website , ebe u khetha sephutheloana sa ho instola hore sistimi ea hau ea ts'ebetso e khoasolle.
• Ho kenya Tsamaiso ea Boto ea Arduino

1. Motsamaisi oa Boto URL e sebelisoa ho supa lintlha tsa boto ea nts'etsopele bakeng sa sethala se itseng. Ho menu ea Arduino IDE, khetha File -> Likhetho
   
2. Kopitsa tsamaiso ea boto ea ESP URL ka tlase ho Motsamaisi oa Boto ea Tlatsetso URLs: lebala, 'me u boloke.
   https://espressif.github.io/arduino-esp32/package_esp32_dev_index.json
   
   
3. Ka lehlakoreng le leng, khetha Mookameli oa Boto, batla M5Stack, ebe o tobetsa Kenya.
   
4. Ka lehlakoreng le leng, khetha Mookameli oa Boto, batla M5Stack, ebe o tobetsa Kenya.
   Ho latela sehlahisoa se sebelisitsoeng, khetha boto ea ntlafatso e tsamaellanang tlasa Lisebelisoa -> Boto -> M5Stack -> {ESP32S3 DEV Module board}.
   
5. Hokela sesebediswa khomphuteng ya hao ka thapo ya data ho kenya lenaneo

Litokomane / Lisebelisoa

M5 STACK Flow Connect Software [pdf] Bukana ea Mosebelisi M5FCV1, 2AN3WM5FCV1, Flow Connect Software, Connect Software, Software

Litšupiso

• Bukana ea Mosebelisi