Samsung QM98T/QM98T-B Quick Setup Guide
Model: QM98T / QM98T-B
Checking the Components
Contact the vendor where you purchased the product if any components are missing. Components may differ in different locations.
- Quick Setup Guide
- Regulatory guide
- Batteries (AAA x 2) (Not available in some locations)
- RS232C adapter
- Warranty card (Not available in some locations)
- Power cord
- Remote Control
Connecting Devices
The following sections describe how to connect various devices to your Samsung display.
Connecting to a PC
Connect to a PC using a HDMI cable or HDMI-DVI cable (HDMI IN 1/2) or a DP cable (DP IN).
Connecting to a Video Device
Connect to a video source device using a HDMI cable or HDMI-DVI cable (HDMI IN 1/2).
Connecting to an Audio System
Connect to an audio system using an audio cable via the AUDIO OUT port.
Connecting to MDC (Multi-Device Control)
Connect to MDC using an RS232C adapter via the RS232C IN/OUT ports or connect to MDC and the Internet using a LAN cable via the RJ45 port.
Connecting the LAN Cable
Use Cat7 (*STP Type) cable for the connection (10/100 Mbps). Shielded Twist Pair.
Product Ports and Connections
Detailed descriptions of the ports:
- HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN): Connects to a source device using a HDMI cable or HDMI-DVI cable. HDMI IN 2 can also be used for daisy-chaining.
- DP IN (DAISY CHAIN IN): Connects to a PC using a DP cable. Can also be used for daisy-chaining.
- DVI/MAGICINFO IN: Connects to a source device using a DVI cable or HDMI-DVI cable. MAGICINFO IN connects to a network box using a DP-DVI cable to use Magicinfo.
- DVI/HDMI AUDIO IN: Receives sound from a source device via an audio cable.
- RJ45: Connects to MDC and the Internet using a LAN cable (10/100 Mbps).
- USB 1 (1.0A): Connect to a USB memory device. Note: USB ports accept a maximum constant current of 1.0A. Exceeding this may cause ports to malfunction.
- USB (0.5A): Connect to a USB memory device. Note: USB ports accept a maximum constant current of 0.5A. Exceeding this may cause ports to malfunction.
- AUDIO OUT: Outputs sound to an audio device via an audio cable.
- RS232C IN: Connects to MDC using an RS232C adapter.
- RS232C OUT: Connects to MDC using an RS232C adapter.
- HDMI OUT: Connects to another product using a HDMI cable.
- IR IN: Connects to an external IR cable that receives signals from the remote control.
Product Controls
- Remote Sensor: Located on the bottom of the product. Press remote control buttons pointing towards this sensor. Note: Using other display devices in the same space may cause unintended control of those devices.
- Power Button: Controls the power state of the display.
- Power Indicator: Shows the power status of the display.
Specifications
| Category | Details |
|---|---|
| Model Name | QM98T / QM98T-B |
| Panel Size | 98 CLASS (97.5 inches / 247.7 cm) |
| Display Area | 2158.848 mm (H) x 1214.352 mm (V) |
| Power Supply | AC100-240V~ 50/60Hz (Refer to the label at the back of the product as the standard voltage can vary in different countries.) |
| Operating Environment | Temperature: 32 °F-104 °F (0 °C-40 °C) Humidity: 10%-80%, non-condensing |
| Storage Environment | Temperature: -4 °F-113 °F (-20 °C-45 °C) Humidity: 10% - 90%, non-condensing |
* This is a Class A product. In a domestic environment, it may cause radio interference, requiring the user to take adequate measures.
For detailed device specifications, visit the Samsung website.
Wall Mount Kit Specifications
| Category | Details |
|---|---|
| Model Name | QM98T / QM98T-B |
| Standard Screw | M8 |
| Screw Length | 47 mm (4.7 cm) |
| Quantity | 4 |
Troubleshooting
| Issue | Solution |
|---|---|
| The screen keeps switching on and off. | Check that the cable between the product and the PC is connected correctly. |
| No Signal is displayed on the screen. | Check that products (including source device) are connected correctly with a cable. Check that the source device connected to the product is powered on. |
| Not Optimum Mode is displayed. | Depending on the type of external device, the screen may not display properly. Connect it with the HDMI Hot Plug function turned On. This message is displayed when a signal from the graphics card exceeds the product's maximum resolution and frequency. Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to the product specifications. |
Contact SAMSUNG WORLD WIDE
For support and inquiries, please contact Samsung.
Web site: http://www.samsung.com
Customer Care Centers:
- U.S.A: 1-800-SAMSUNG (726-7864)
- CANADA: 1-800-SAMSUNG (726-7864)
- ARGENTINA: 0800-555-SAMS (7267)
- BOLIVIA: 800 107 260
- BRAZIL: 0800 555 0000
- CHILE: 4004-0000
- COLOMBIA: 800 726 786
- COSTA RICA: 600 12 72
- DOMINICAN REPUBLIC: 01 8000 112 112
- ECUADOR: #726
- EL SALVADOR: 00-800-1-SAMSUNG (726-7864)
- GUATEMALA: 1-800-751-2676
- HONDURAS: 1-800-SAMSUN (72-6786)
- JAMAICA: 8000-SAMSUNG (726-7864)
- MEXICO: 1-800-299-0033 (Also: 800-SAMSUNG)
- NICARAGUA: 800-2791-9111
- PANAMA: 1-800-SAMSUNG (726-7864)
- PARAGUAY: 800-SAMSUNG
- PERU: 001-800-5077267
- PUERTO RICO: 800-0101
- TRINIDAD & TOBAGO: 0800-11-SAMS (7267)
- URUGUAY: 080077708
- VENEZUELA: 1-800-682-3180
Mexico Import Information: IMPORTADO POR: SAMSUNG ELECTRONICS MÉXICO S.A. DE C.V. General Mariano Escobedo 476, Piso 8 Col. Anzures, Alcaldía Miguel Hidalgo, Ciudad de México CP. 11590 TEL: (55) 5747-5100/800 726 7864
Samsung US | Mobile | TV | Home Electronics | Home Appliances | Samsung US
