LUMIRING ICON-PRO Access Controller Ka Wireless Gateway Taelo

ICON-PRO ke taolo ea phihlello e nang le heke e se nang mohala
e etselitsoeng litsamaiso tse sireletsehileng tsa taolo ea phihlello. E na le likarolo tse ngata
li-terminals tsa ho kenya le ho tsoa bakeng sa ho hokahanya likarolo tse fapaneng tse joalo
e le mamati, liloko, le lisensara.

Lisebelisoa tsa Litekanyo

Bophahamo: 4.05 inch
Bophara: 3.15 lisenthimithara

Botebo: 1.38 lisenthimithara

Controller & Gate Slave Mode Connection Terminals

Sesebelisoa se kenyelletsa li-terminals tse fapaneng tsa khokahano bakeng sa tse fapaneng
mesebetsi:

USB Service Port Type-C
Letšoao la LED: Bofubelu, Botala, Botala

Matla HO: GND, +VDC
Monyako oa 2 HO: Ikopanye le 2, GND, Kopo ea ho Tsoa

Wiegand 2 IN: +VDC, GND, Buzzer, LED D1, D0
Monyako oa 1 HO: Ikopanye le 1, GND, Kopo ea ho Tsoa

Wiegand 1 IN: +VDC, GND, Buzzer, LED D1, D0

Litlhaloso tsa Radio Transceiver

Sesebediswa se tshehetsa puisano ya radio transceiver bakeng sa waelese
kgokelo.

Keletso ea Bohlokoa ka Liphetoho tsa Lisebelisoa

Moetsi a ka fetola likabelo tsa phini tsa kantle le sesebelisoa
ponahalo ntle le tsebiso ho ntlafatsa tshebetso, ergonomics, kapa
ho latela maemo. Basebelisi ba lokela ho sheba tsa morao-rao
litokomane tsa tekheniki pele o sebelisoa.

Litaelo tsa Tšebeliso ea Sehlahisoa

Kemiso le Khokahano

Netefatsa hore sesebelisoa se koetsoe pele se kengoa.

Hokela li-terminals tse amehang ho latela taolo ea hau ea phihlello
litlhoko tsa tsamaiso.
Sheba buka ea mosebelisi bakeng sa litaelo tse qaqileng tsa wiring.

Ho rarolla mathata a tloaelehileng

Haeba u kopana le mathata ka sesebelisoa, latela mehato ena:

Sheba likhokahano tsohle ho netefatsa hore li bolokehile.

Netefatsa phepelo ea motlakase ho sesebelisoa.
Sheba karolo ea ho rarolla mathata bukeng ea mosebelisi bakeng sa
likhoutu tse itseng tsa liphoso le tharollo.

FAQ (Lipotso Tse Botsoang Hangata)

P: Nka fumana mofuta oa morao-rao oa buka ea mosebelisi hokae?

A: Phetolelo ea morao-rao ea bukana e ka fumanoa ho rona websebaka
kapa ka ho ikopanya le tšehetso ea bareki.

P: Ke seta sesebelisoa joang ho li-setting tsa feme?

A: Ho seta sesebelisoa bocha, batla konopo ea reset ebe u e tšoara
bakeng sa metsotsoana e 10 ha sesebelisoa se ntse se buletsoe.

View Fullscreen

ICON-PRO
MOLAOLI WA HO FIHLELA LE KITIKO E SE NANG LE WASE

USB LED MATLA A MNYAKO 2
SEEMO MOFUTA-C

GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D 1 D 0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D 1 D 0

MOHLOLI 1

MONYAKO 1

MOHLOLI 2

WWW.LUMIRING.COM

OSDP DOOR 3 DOOR 4 LOCK 1 LOCK 2 LOCK 3 LOCK 4 KOTANE

TLHOKOMELO BA
REX 3 GND
TSOELA PELE.3 REX 4
GND TSELA.4
NC C
HA HO NC
C NO NC
C NO NC
C NO

USB LED MATLA A MNYAKO 2
SEEMO MOFUTA-C

GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D 1 D 0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D 1 D 0

MOHLOLI 1

MONYAKO 1

MOHLOLI 2

WWW.LUMIRING.COM

OSDP DOOR 3 DOOR 4 LOCK 1 LOCK 2 LOCK 3 LOCK 4 KOTANE

TLHOKOMELO BA
REX 3 GND
TSOELA PELE.3 REX 4
GND TSELA.4
NC C
HA HO NC
C NO NC
C NO NC
C NO

2024-05-30 V 1.7
MOEKETSI

LIEKETSENG
· Kenyelletso · Litlhophiso tsa Sesebediswa ka ho Fetisisa · Lintlha tsa Sesebediswa · Lintlha tsa Radio Transceiver · Litekanyo tsa Sesebediswa · Laola & Gate Slave Litheminara tsa Khokahano · Gate Master mode Litheminara tsa Khokelo · Pontšo.
Litšebelisano tsa Tlhophiso ea Yuniti le Li-Buttons Screens Ho utloisisa tlhahisoleseling e bonts'itsoeng · Litlhahiso tsa Tlhophiso: Ho hokela Antenna ea OEM Ho Hokela Khoele ea Katoloso ea Antenna (sehlahisoa sa boikhethelo) Ho beoa le Wiring Ho hokela Matla ho Sesebelisoa sa Wiegand Connection Ho hokahanya OSDP Ho Hokela Lilotlolo tsa Motlakase Tšireletso Khahlanong le Khokahano e Phahameng ea Hona Joale Ho Kopanya Pholiso e Ikemetseng maemong a Likarolo tsa Tahlehelo ea Khokahano · Controller & Gates Slave modes (Connection Diagram): Wiegand Readers Door Sensor & Exit Button AIR-Button V 2.0 AIR-Button V3.0 Kopo ea ho Tsoa PIR Motion Sensor Motlakase Lock · Gate Master mokhoa (Sets'oants'o sa Khokahano ho ICON-Pro Controller): Liphetho tsa Wiegand Liphetho tsa REX, CONTACT Outputs Relay Inputs Litlhahiso tsa OSDP (E Tla Haufinyane!) · Web Sehokelo: Kena Ntlafatso ea Firmware ea Tlhokomelo ea Netweke ka Cloud Server · Seta Hardware Reset · Glossary · Mefuta e Tšehetsoang ea Babali · Bakeng sa Lintlha
ICON-PRO/WW

3 3 4 4 5 6 7
8 8 8 9
9 10 10 10 10 10 10 10 11 11 11 11
12 14 15 16 17 19
20 21 22 23
24 25 26 27 28 29 31 32 33
2

Selelekela
Tokomane ena e fana ka lintlha tse qaqileng mabapi le sebopeho sa ICON-PRO - Taolo ea phihlello e nang le heke e se nang mohala le litaelo tsa ho kenya le ho hokahanya.
E boetse e kenyelletsa litaelo tse khethollang likotsi tse ka bang teng le mekhoa ea ho rarolla mathata a tloaelehileng. Tataiso ena ke ea merero ea tlhahisoleseling feela, 'me haeba ho na le ho se lumellane hofe kapa hofe, sehlahisoa sa sebele se tla pele.
Litaelo tsohle, software le ts'ebetso li ka fetoha ntle le tsebiso pele. Phetolelo ea morao-rao ea bukana ena le litokomane tse ling li ka fumanoa ho rona websebaka kapa ka ho ikopanya le tšehetso ea bareki.
Mosebedisi kapa motho ya kenyang o na le boikarabelo ba ho ikamahanya le melao ya lehae le melawana ya khupamarama.

Default Settings Sesebediswa
Lebitso la sesebelisoa sa Wi-Fi ha u batla: · WW_M/SD_(serial_number) AP Wi-Fi IP address ea sesebelisoa: · 192.168.4.1 password ea Wi-Fi: · Ha e eo (fektheri ea kamehla)

Web ho kena leqepheng: · admin Web password ea leqephe: · admin123 AP Wi-Fi timer: · metsotso e 30

Na u fumane phoso kapa u na le potso? Ka kopo re romelle lengolo-tsoibila ho https://support.lumiring.com.

ICON-PRO/WW

Litlhaloso tsa Sesebelisoa
Moqtage: · 12 kapa 24 tshebetso VDC · The voltage ho liphetho ho khethoa ke
phepelo ea motlakase. · 0.2A @12 VDC, 0.1A @ 24 VDC hona joale
tshebediso Sesebediswa sa makgoba: · Dipoelo:
Mefuta e mene (4) e ommeng "C" 1.5A e lekantsoe liphetho tsa relay
· Litlhahiso: Tse robeli (8) tse kenang (ho omella) ho tloha ho 0 ho isa ho 5 VDC One (1) ho kenya (dry contact) 0 ho isa ho 5 VDC bakeng sa ho bula sebaka sa tšohanyetso
Sesebediswa se hloahloa: · Dipoelo:
Liphetho tse robeli (8) (ho omella) ho tloha ho 0 ho isa ho 5 VDC
· Litlhahiso: Lisebelisoa tse 'nè (4) tsa ho laola li-relay (dry contact) ho tloha ho 0 ho ea ho 5 VDC
Mahokelo a puisano: · Wi-Fi 802.11 b/g/n 2.4 GHz

· Likou tse peli (2) tsa Wiegand ho tloha ho 4 ho ea ho 80 bits · RS-485 (OSDP) · USB port (Mofuta-C) bakeng sa ntlafatso ea firmware Range: · 3,280 ft (1 000 m) Encryption: · AES128 Dimensions (L x W x H): · 5.9″ x 3.15″ x 1.38″ (150 x 80 x 35 mm)
ho sa kenyeletsoe antenna Mokhoa oa ho phahamisa: · Moutloa oa lebota/Din rail mount (khetho) Boima: · 5.36 oz (152 g) Mocheso: · Tšebetso: 32°F ~ 120°F (0°C ~ 49°C) · Polokelo: -22 °F ~ 158°F (-30°C ~ 70°C) Mongobo o amanang · 5-85 % RH ntle le condensation Tekanyetso ea tšireletso ea Ingress: · IP 20

Litlhaloso tsa Radio Transceiver
Matla a ho fetisa: · 1 Watt (30dBm) Sehlopha sa maqhubu: · 868 MHZ (EU) · 915 MHz (NA)

Likanale: · 140 (FHSS) kutloisiso ea Moamoheli: · -117dBm

ICON-PRO/WW

Sesebediswa Dimension

4.05″

3.15″

1.38″
ICON-PRO/WW

2.125″

5.31″ 5.9″

RFID KARETE

3.375″

125, 65535

Controller & Gate Slave Mode Connection Terminals

USB Service Port Type-C
Letšoao la LED le Lefubelu
Botala bo Botala
Matla HO GND +VDC
Monyako oa 2 HO Kopana le 2
Kopo ea GND ea ho Tsoa
Wiegand 2 IN +VDC GND Buzzer LED D 1 D 0
Monyako oa 1 HO Kopana le 1
Kopo ea GND ea ho Tsoa
Wiegand 1 IN +VDC GND Buzzer LED D 1 D 0

MOHLOLI 1

MONYAKO 1

MOHLOLI 2

SESEBETSI SA LEKHOBA LA USB LENYAKO LA 2
SEEMO MOFUTA-C

GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D 1 D 0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D 1 D 0

WWW.LUMIRING.COM

TLHOKOMELO BA
REX 3 GND
TSOELA PELE.3 REX 4
GND TSELA.4
NC C
HA HO NC
C NO NC
C NO NC
C NO

OSDP DOOR 3 DOOR 4 LOCK 1 LOCK 2 LOCK 3 LOCK 4 KOTANE

RS-485/Alarm Alarm IN RS-485 BRS-485 A+
Door 3 IN Kopo ea ho Tsoa ho GND Contact 3
Door 4 IN Kopo ea ho Tsoa ho GND Contact 4
Notlela 1 TSOA NC C NO
Notlela 2 TSOA NC C NO
Notlela 3 TSOA NC C NO
Notlela 4 TSOA NC C NO
Konopo ea Ts'ebeletso Reset/Wi-Fi AP

Moetsi o na le tokelo ea ho fetola likabelo tsa phini tsa kantle le ho beoa ha tsona, hammoho le ponahalo ea sesebelisoa ntle le tsebiso pele. Liphetoho tsena li ka etsoa ho ntlafatsa ts'ebetso kapa ergonomics, kapa ho latela litlhoko le litekanyetso tsa tekheniki. Basebelisi ba eletsoa ho sheba mefuta ea morao-rao ea litokomane le litaelo tsa tekheniki pele ba sebelisa sesebelisoa.

ICON-PRO/WW

Li-terminals tsa Khokahano ea Mokhoa oa Gate Master

USB Service Port Type-C
Letšoao la LED le Lefubelu
Botala bo Botala
Matla HO GND +VDC
Door 2 OUT Contact 2 GND
Kopo ea ho Tsoa 2
Wiegand 2 OUT +VDC GND Buzzer LED D 1 D 0
Door 1 OUT Contact 1 GND
Kopo ea ho Tsoa 1
Wiegand 1 OUT +VDC GND Buzzer LED D 1 D 0

WWW.LUMIRING.COM

OSDP DOOR 3 DOOR 4 LOCK 1 LOCK 2 LOCK 3 LOCK 4 KOTANE

MOSEBETSI OA SEHLOOHO SA USB MONYAKO OA MANTLA EA 2 oa LED
SEEMO MOFUTA-C

GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D 1 D 0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D 1 D 0

MOHLOLI 1

MONYAKO 1

MOHLOLI 2

BA REX 3 GND CONT.3 REX 4 GND CONT.4 GND IN 1
GND KA 2
GND KA 3
GND KA 4

RS-485 RS-485 BRS-485 A+ Door 3 OUT Request to Exit 3 GND Contact 3 Door 4 OUT Request to Exit 4 GND Contact 4 Lock 1 IN GND IN 1
Notlela 2 IN GND IN 2
Notlela 3 IN GND IN 3
Notlela 4 IN GND IN 4
Konopo ea Ts'ebeletso Reset/Wi-Fi AP

ICON-PRO/WW

Pontšo

Pontšo ea tlhahisoleseling e etselitsoe mesebetsi e latelang:
1. Ho bontša boemo ba hona joale ba sesebelisoa.
2. Ho fana ka tlhahisoleseding mabapi le boleng ba puisano.
3. E bonts'a nalane ea ts'ebetso ea yuniti.
4. Taolo ea lintho tse kenang le tse hlahisoang.

5. Ho hlahisa likhoutu tsa likarete tse baloang ho tsoa ho babali ba hokahaneng.
Pontšo ena e fana ka lintlha tsa ts'ebetso bakeng sa:
· Ntlafatso ea ho beha lisebelisoa.
· Ho sekaseka boleng ba puisano tikolohong ea seea-le-moea sa litoropong.

Ho khethoa ha Yuniti
Wi-Fi AP e koetsoe

Tobetsa ho ea ho

Hi power - Sesebelisoa sa kantle ha se kopane

AP 15

Wi-Fi AP e kentsoe sebali sa nako

100 Matla a lets'oao

Sesebediswa se tsamaisane le Voltagboemo

Tšebelisano le Likonopo
Ho nolofalletsa/ho tima sebaka sa phihlello sa Wi-Fi (AP): · Tšoara fatše ebe o lokolla Konopo ea Tšebeletso
e pela sehokedi sa lenakana. Ho tsamaea: · Tšoara ebe o lokolla konopo ea holimo/tlase bakeng sa
Motsotsoana o le 1 ho ea skrineng se latelang.

Bakeng sa ketso: · Tšoara ebe o lokolla e
ea bobeli.

konopo bakeng sa 1

Litšoantšo tsa AP15
5.2v

100

Skrine se seholo:

· Boemo ba Wi-Fi AP le nako ea ho hakolla.

· Matla a pontšo ka liphesente.

· Tlhokomeliso ea betri e tlase.

· Keletso ea ho kenya lisebelisoa.

· Boemo ba ho hokahanya le sesebelisoa se arabelang.

Lintlha ka sesebelisoa: · Lebitso, mofuta, le nomoro ea seriale. · Mofuta oa firmware. · Phepelo ea motlakase ea hajoaletage. · Mofuta le nomoro ea seriale ea lisebelisoa tse pentiloeng.

Liketso tse skrineng sa lintlha tsa sesebelisoa: · Ho fumana sesebelisoa se parang, tšoara konopo motsotsoana o le mong. · Sesebelisoa se ka lehlakoreng le leng se tla lla ka morethetho ho bontša sebaka sa sona. · Letšoao la matla a pontšo le lona le tla panya ha le ntse le fumana. · Ho emisa ts'ebetso, tšoara konopo hape motsotsoana o le mong.

ICON-PRO/WW

Pontšo

Lintlha tsa sesebelisoa · E bontša matla a lets'oao joalo ka liperesentetage karo-karolelano. · Peresentetage ea tahlehelo ea liphutheloana metsotsong e 60 e fetileng. · Peresentetage ea tahlehelo ea pakete metsotsong e 10 e fetileng. · Peresentetage ea tahlehelo ea liphutheloana lihoreng tse 24 tse fetileng.

Ho lahleheloa ke pakete 10 min

24 h

Kerafo ea tahlehelo ea pakete: · E bonts'a graph ea tahlehelo ea pakete metsotsoana e 60 e fetileng, 10
metsotso, kapa lihora tse 24.

10 5

· Tobetsa ho fetola nako ea nako.

0 Tlhokomeliso: Lipalopalo li setiloe bocha ha yuniti e tingoa.
10 9 8 7 6 5 4 3 2 1 0

ho beha leihlo
1 234

Tlhokomelo ea ho kenya le ho tsoa · Boemo ba ts'ebetso ea REX 1 ho ea ho 4. · CONT. boemo ba ts'ebetso ea 1 ho ea ho 4. · LOCK activation status 1 ho 4. · LED 1, 2 le BUZ 1, 2 boemo ba ts'ebetsong.

Pontšo ea khoutu e fetisoang · HEX ka hexadecimal. · UID (Identifier e ikhethileng) nomoro ea seriale kapa pin code. · Mohloli oa lintlha: W1, W2, kapa aterese ea OSDP. · Sebopeho sa data bits: 4 ho isa ho 80 bits.

Ho utloisisa lintlha tse bontšitsoeng · Lintlha tsohle tse kenang li hlahisoa ka tatellano skrineng. Khoutu e ncha e hlahisoa ka tlase. · Litekanyetso tse ka pele ho data ho HEX li bonts'a nomoro ea port ea Wiegand le palo ea likotoana tsa data. Sena
ponts'o e ts'oana bakeng sa likou tsohle tse nang le data e kenang, ho kenyeletsoa le babali ba OSDP. Bakeng sa mohlalaample: W2_26 AE:25:CD e bontša hore data e tsoa ho Wiegand 2 port ka 26 bits. Khoutu ea hexadecimal ea latela. · Lintlha tsa boleng ba data tsa Identifier (UID) li lokela ho utloisisoa e le tlhaloso ea data ea decimal.

Litlhahiso tsa ho kenya
Tlhokomeliso! Se ke oa bulela lisebelisoa ntle le li-antenna tse kentsoeng! Ho etsa joalo ho ka senya mojule oa seea-le-moea 'me ha baka ho hloleha ha sesebelisoa pele ho nako!
Ho hokela lenakana la OEM · Linakana li hokeloa ho lisebelisoa pele li tima. · Sehokelo sa antenna se lokela ho tiisoa ka letsoho, ntle le tšebeliso ea lisebelisoa tse ntlafalitsoeng kapa tse feteletseng
matla. • Tiisa sehokelo ka botlalo 'me u etse bonnete ba hore ha se lokolloe ha lenakana le potoloha.

ICON-PRO/WW

Litlhahiso tsa ho kenya

Ho hokela Khoele ea Katoloso ea Antenna (sesebelisoa sa boikhethelo)

Cable ya lenakana: Bolelele: Sehokedi se kenyang: Sehokedi se hlahisang: Antenna RPSMA-Esadi (jack):

The impedance wave ea cable ke 50 ohms. 33 ft (10 m) MAX. RPSMA-Mosali (jack). RPSMA-Male (plug). Maqhubu a ho sebetsa 868-915MHz.

Placement and Wiring · Bophahamo ba mefuta e mengata bo eketseha ha lisebelisoa li behiloe holim'a litšitiso kapa meleng e tobileng ea pono ea e 'ngoe le e 'ngoe
tse ding. · Leka ho khetha sebaka se setle ka ho fetisisa bakeng sa ho kenya, hole le mehloli ea mahlaseli a matla a kang cellular
tse pheta-phetoang, lithapo tsa motlakase tse ka holimo-limo, lienjene tsa motlakase, joalo-joalo. · Bonyane sebaka pakeng tsa li-transmitters tse sebetsang tsa seea-le-moea se laoloe ke tšebetso ea tsona seea-le-moeeng.
tikoloho. · Liphetho tsa liteko li bonts'a ts'ebetso e nepahetseng ea li-transmitters tse tharo tse sebetsang sebakeng se le seng sa mithara ho tloha ho se seng le se seng
tse ding. Ha palo ea li-transmitters tse sebetsang tsa seea-le-moea li eketseha, ho lieha ho fapanyetsana ha seea-le-moea ho bonoa ka lebaka la ho theha tšitiso e matla ea seea-le-moea. • Qoba ho beha sesebelisoa holim'a tšepe, kaha sena se ka fokotsa boleng ba khokahano ea radio. · Sesebelisoa se khomaretsoe sebakeng sa ho kenya e le hore antenna e tla phuthoa e lebelle holimo ka holimo. Ho Hokela Motlakase ho Sesebediswa · Sebelisa thapo ea motlakase e nang le karolo e fapaneng e loketseng ho fana ka tšebeliso ea hajoale ea lisebelisoa tse hoketsoeng. Etsa bonnete ba hore u sebelisa lisebelisoa tse peli tse arohaneng tsa motlakase bakeng sa sesebelisoa le li-actuator. Khokahano ea Wiegand · Sebelisa mokhoa o tšoanang oa Wiegand le tatellano ea li-byte ho hokahanya babali ho qoba liphapang tsa ho bala khoutu ea karete le pherekano e latelang tsamaisong. · Bolelele ba mohala oa puisano oa Wiegand ha boa lokela ho feta 328 ft (100 m). Haeba mohala oa puisano o le telele ho feta 16.4 ft (5 m), sebelisa thapo ea UTP Cat5E. Mohala o tlameha ho ba bonyane maoto a 1.64 (0.5 m) ho tloha ho lithapo tsa motlakase. · Boloka lithapo tsa motlakase tsa 'mali li le khuts'oane ka hohle kamoo ho ka khonehang ho qoba molumo oa bohlokoatage oela ka holim'a tsona. Ka mor'a ho beha lithapo, etsa bonnete ba hore motlakase o na le voltage ho 'mali ke bonyane 12 VDC ha liloko li butse. Ho hokahanya OSDP · OSDP e sebelisa sebopeho sa RS-485 se etselitsoeng likhokahano tsa sebaka se selelele. E sebetsa ho fihla ho 3,280 ft (1,000 m) ka khanyetso e ntle ea tšitiso ea lerata. · Mohala oa puisano oa OSDP o lokela ho ba hole le likhoele tsa motlakase le mabone a motlakase. Mohala o sothehileng o le mong, mohala o sirelelitsoeng, impedance ea 120, 24 AWG e lokela ho sebelisoa e le mohala oa puisano oa OSDP (haeba ho khoneha, theola thebe ka lehlakoreng le leng). Ho hokela Liloko tsa Motlakase · Hokela lisebelisoa ka li-relay haeba ho hlokahala ho itšehla thajana ho tloha sesebelisoa kapa haeba u hloka ho laola highvol.taglisebelisoa kapa lisebelisoa tse nang le ts'ebeliso e kholo ea hajoale. · Ho netefatsa ts'ebetso ea sistimi e tšepahalang, ho molemo ho sebelisa mohloli o le mong oa matla bakeng sa balaoli le o mong o arohaneng bakeng sa li-activators. Tšireletso Khahlanong le Maqhubu a Phahameng a Hajoale · Diode e sirelletsang e sireletsa lisebelisoa ho tsoa maqhubung a ka morao ha e kenya senotlolo sa motlakase kapa sa motlakase. Diode e sireletsang kapa varistor e kentsoe haufi le senotlolo se bapileng le mabitso. DIODE E HOKANE LE REVERSE POLARITY.

Diode: (Hokela ka polarity reverse) SR5100, SF18, SF56, HER307, le tse ling tse tšoanang.

Varistors: (Ha ho polarity e hlokahalang)

5D330K, 7D330K, 10D470K, 10D390K, le tse ling tse tšoanang.

ICON-PRO/WW

Litlhahiso tsa ho kenya
Litlhahiso bakeng sa Khokelo · Etsa likhokahano tsohle ha motlakase o timme. · Lithapo li hoketsoe ho li-terminal tse ntšitsoeng feela. · Etsa bonnete ba hore o sheba khokahano e nepahetseng pele o bulela yuniti. Ho kopanya 1. Hokela master sevice mohloling oa matla. Netefatsa hore letšoao la LED le benya boputsoa, ho bontša para
mokhoa oa ho batla. 2. Hokela sesebelisoa sa lekhoba mohloling oa matla. Hape, etsa bonnete ba hore letšoao la LED le benya boputsoa ho bontša
para ho batla mokhoa. 3. Ha motlakase o qala ho tsoa ka har'a lebokose kapa ka mor'a ho seta botjha ha hardware, diyuniti di ya ka tsela e iketsang
mokhoa oa ho kopanya, o nkang metsotsoana e ka bang 10. 4. Hang ha mokhoa ona o phethiloe, lihlopha li se li loketse ho sebelisoa. Pholiso e Ikemetseng Tabeng ea Tahlehelo ea Khokahano · Ha nako e ntse e ea le nakong ea ts'ebetso, tikoloho e potolohileng seea-le-moea e ka fetoha, e lebisang ho
ho hlōleha ha puisano le ho fokotseha ha sebaka sa ho sebetsa. · Haeba ho na le khokahanyo e theohileng kapa ho hloleha ha matla, sesebelisoa se tla etsa liteko tse 'maloa ho qala hape
puisano, ho kenyelletsa ho seta mojule oa seea-le-moea bocha le ho qala bocha ka botlalo. · Haeba sesebelisoa se sa fumane karabo, se tla kena boemong ba standby. · Hang ha puisano e tsosolositsoe, yuniti e tla qala ts'ebetso ka bo eona. Maemong a mang, ho ka nka
ho fihlela motsotsong o le mong ho tloha ha khithi e qala ho theha khokahano hape. Likarolo tsa ho Kopanya · Ha u kopanya lisebelisoa, lisebelisoa tsa master-slave li lokela ho buloa e le 'ngoe ka nako. · Haeba lisebelisoa tse ngata tse sa sebetsaneng li tsamaisoa ka nako e le 'ngoe, ho ka etsahala ho thulana, ho baka phoso.
phapanyetsano ea data ho matla a pele a matla, ka hona ts'ebetso e feletseng e ke ke ea khoneha. · Haeba sena se etsahala, etsa feela reset e feletseng ea sesebediswa se sete mme o kopane hape ka sete e le 'ngoe e nolofalletsoeng bakeng sa ho para.

ICON-PRO/WW

Controller & Gate Slave mekhoa: Wiegand Readers
Setšoantšo sa Khokahano

12 34 56 78 90
*#

12 34 56 78 90
*#
ICON-PRO/WW

Green Data 0 White Data 1 Orange Green LED Brown/Yellow Red LED/Beeper Black GND
E khubelu +VDC
· Pele o qala ho haha marang-rang a marang-rang bakeng sa babali ba Wiegand, bala litlhaloso tsa sebopeho.
· Setšoantšo sa wiring se bontšoa e le example. Ha e le hantle, mebala ea terata e ka fapana ho itšetlehile ka mohlala oa 'mali oa motho oa boraro.
· Ka kopo sheba litaelo tsa moetsi oa 'mali.

MOHLOLI 1

MONYAKO 1

MOHLOLI 2

SESEBETSI SA LEKHOBA LA USB LENYAKO LA 2
SEEMO MOFUTA-C

WWW.LUMIRING.CO
GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D 1 D 0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D 1 D 0
12

Controller & Gate Slave mekhoa: Wiegand Readers
Setšoantšo sa Khokahano

WWW.LUMIRING.CO

SESEBETSI SA LEKHOBA LA USB LENYAKO LA 2
SEEMO MOFUTA-C

Green Data 0 White Data 1 Orange Green LED Brown/Yellow Red LED/Beeper Black GND
E khubelu +VDC

ICON-PRO/WW

· Pele o qala ho haha marang-rang a marang-rang bakeng sa babali ba Wiegand, bala litlhaloso tsa sebopeho.
· Setšoantšo sa wiring se bontšoa e le example. Ha e le hantle, mebala ea terata e ka fapana ho itšetlehile ka mohlala oa 'mali oa motho oa boraro.
· Ka kopo sheba litaelo tsa moetsi oa 'mali.

MOHLOLI 1

MONYAKO 1

MOHLOLI 2

GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D 1 D 0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D 1 D 0
13

Controller & Gate Slave mekhoa: Door Sensor le Tsoa Konopo
Setšoantšo sa Khokahano

WWW.LUMIRING.CO

SESEBETSI SA LEKHOBA LA USB LENYAKO LA 2
SEEMO MOFUTA-C

MOHLOLI 2

GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D 1 D 0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D 1 D 0

MONYAKO 1

MOHLOLI 1

· Hlalosa boemo ba "Bula" ho li-setting tsa ontroller ha sensor ea monyako e hokahane.
· Ho hokela sehokelo sa "DOOR 3" le "DOOR 4" ho etsoa ka mokhoa o ts'oanang.
· Hlalosa boemo ba "Ho koetsoe" ho litlhophiso tsa sebali ha konopo ea ho tsoa e hokahane.

ICON-PRO/WW

Controller & Gate Slave mekhoa: AIR-Button V 2.0
Setšoantšo sa Khokahano

AIR-B
(V 2.0 Mehala e Mene)

AVE
BULETSE

Bofubelu bo Botšo
Botala bo Botala

+VDC GND REX LED e tala

· Ho hokela lihokelo tsa “DOOR 2,” “DOOR 3,” le “DOOR 4” ho etsoa ka tsela e tšoanang.
· Likonopo ke litlhophiso tsa kamehla tsa feme ke "Ka tloaelo Open."
· Sena se bolela hore letšoao la boemo bo tlaase bakeng sa taolo le tla hlaha ka terata e putsoa ha u beha letsoho la hao ho sensor ea optical.
· Ha u beha konopo ea ho tsoa tšebeletsong ea leru, khetha boemo bo "koetsoeng".
· Sena se bolela hore ha pontšo ea "boemo bo tlaase" e kenngoa ho kenyelletso ea REX, relay ea molaoli e tla sebelisoa.
ICON-PRO/WW

MOHLOLI 1

MONYAKO 1

MOHLOLI 2

SESEBETSI SA LEKHOBA LA USB LENYAKO LA 2
SEEMO MOFUTA-C

WWW.LUMIRING.CO
GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D 1 D 0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D 1 D 0
15

Controller & Gate Slave mekhoa: AIR-Button V 3.0
Setšoantšo sa Khokahano

AIR-B
(V 3.0 Mehala e Hlano)

Bokhubelu bo Botšo bo Botala bo Bosehla
Boputsoa

+VDC GND REX (e boloketsoe) LED e tala

MOHLOLI 1

MONYAKO 1

MOHLOLI 2

SESEBETSI SA LEKHOBA LA USB LENYAKO LA 2
SEEMO MOFUTA-C

WWW.LUMIRING.CO
GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D 1 D 0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D 1 D 0
16

Controller & Gate Slave mekhoa: Kopo ea ho Tsoa PIR Motion Sensor
Setšoantšo sa Khokahano

NC NO +VDC GND

Sensor ea Motion
· Ho hokela lihokelo tsa “DOOR 2,” “DOOR 3,” le “DOOR 4” ho etsoa ka tsela e tšoanang.
· Sensor e tsamaeang e sebetsa e le konopo ea ho tsoa ka boiketsetso mme ka hona e hokahane joalo ka konopo ea ho tsoa. Hokela lithapo ho mabitso a C (Common) le NO (Ka tloaelo Bula) ea relay ea sensor ea motsamao.
· Sebelisa mokhoa oa pulse ho laola relay, e kentsoeng ha sensor ea motsamao e qala.
· Ha u lokisa konopo ea ho tsoa tšebeletsong ea leru, khetha boemo bo "koetsoeng". Sena se bolela hore ha lets'oao la "boemo bo tlase" le kenngoa ho kenyelletso ea REX, relay ea taolo e tla etsoa.
ICON-PRO/WW

MOHLOLI 1

MONYAKO 1

MOHLOLI 2

SESEBETSI SA LEKHOBA LA USB LENYAKO LA 2
SEEMO MOFUTA-C

WWW.LUMIRING.CO
GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D 1 D 0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D 1 D 0
17

Controller & Gate Slave mekhoa: Kopo ea ho Tsoa PIR Motion Sensor
Setšoantšo sa Khokahano

NC NO +VDC GND

MOHLOLI 1

MONYAKO 1

MOHLOLI 2

SESEBETSI SA LEKHOBA LA USB LENYAKO LA 2
SEEMO MOFUTA-C

WWW.LUMIRING.CO
GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D 1 D 0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D 1 D 0
18

OSDP DOOR 3 DOOR 4 LOCK 1 LOCK 2 LOCK 3 LOCK 4 KOTANE

Controller & Gate Slave mekhoa: Motlakase Locks

Setšoantšo sa Khokahano

WW.LUMIRING.COM

TLHOKOMELO BA
REX 3 GND
TSOELA PELE.3 REX 4
GND TSELA.4
NC C
HA HO NC
C NO NC
C NO NC
C NO

· Hlalosa mofuta oa taolo ea "Impulse" ho litlhophiso tsa taolo ha senotlolo sa ho otla se hokahane.
· Hlalosa mofuta oa taolo ea "Trigger" litlhophisong tsa taolo ha ho hoketsoe senotlolo sa makenete.
Strike Lock

GND

Notlela 1 Senotlolo 2 +VDC

Tlhokomediso
Sebelisa Polarity e nepahetseng!
Tlhokomediso
Sebelisa Polarity e nepahetseng!
Senotlolo sa Magnetic

ICON-PRO/WW

Phepelo ea motlakase

Tlhokomediso
Diode e sireletsang e sebelisoa ho sireletsa Mookameli ho tloha maqhubu a morao ha ho kenngoa senotlolo sa motlakase kapa sa electromechanical. Diode e sireletsang e hokahane ka tsela e tšoanang le likhokahano tsa senotlolo. DIODE E HOKANE LE REVERSE POLARITY. Diode e tlameha ho kenngoa ka kotloloho ho mabitso a senotlolo. Li-diode tse loketseng li kenyelletsa SR5100, SF18, SF56, HER307, le tse ling tse tšoanang. Sebakeng sa diode, li-varistors 5D330K, 7D330K, 10D470K, le 10D390K li ka sebelisoa, tseo ho sa hlokahaleng ho bona polarity.
19

Mokhoa oa Gate Master: Liphetho tsa Wiegand
Setšoantšo sa Khokahano ho ICON-Lite Controller

BA REX 3 GND CONT.3 REX 4 GND CONT.4 GND IN 1 GND IN 2 GND IN 3 GND KA 4

WWW.LUMIRING.COM

OSDP

MONYAKO 3

MONYAKO 4

Notlela 1

LOCK 2 AP 15

Notlela 3

LOTELA 4 KOPANO EA 100

MOSEBETSI OA SEHLOOHO SA USB MONYAKO OA MANTLA EA 2 oa LED
SEEMO MOFUTA-C

MOHLOLI 2

MONYAKO 1

MOHLOLI 1

GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D1 D0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D1 D0

PoWeR

REX 3
GND TSOHLE. 3
REX 4 GND
TSOHLE. 4 NC C NO NC C NO NC C NO NC C NO

HO HLAHALA KA B

WWW.LUMIRING.COM

OSDP DOOR 3 DOOR 4 RELAY 1 RELAY 2 RELAY 3 RELAY 4 BUTTON

MOLAOLI oa phihlello ea ICON-Lite NETWORK

USB LED MATLA A MNYAKO 2

MOHLOLI 2

MONYAKO 1

MOHLOLI 1

BOEMO GND 12/24 TSOHLE. 2 GND REX 2 +VDC GND BUZZER G LED D1 D0 CONT. 1 GND REX 1 +VDC GND BUZZER G LED

MOFUTA-C

PoWeR

ICON-PRO/WW

Mokhoa oa Gate Master: Litholoana tsa REX, Litholoana tsa ho Kopana
Setšoantšo sa Khokahano ho ICON-Lite Controller

BA REX 3 GND CONT.3 REX 4 GND CONT.4 GND IN 1 GND IN 2 GND IN 3 GND KA 4

WWW.LUMIRING.COM

OSDP

MONYAKO 3

MONYAKO 4

Notlela 1

LOCK 2 AP 15

Notlela 3

LOTELA 4 KOPANO EA 100

MOSEBETSI OA SEHLOOHO SA USB MONYAKO OA MANTLA EA 2 oa LED
SEEMO MOFUTA-C

MOHLOLI 2

MONYAKO 1

MOHLOLI 1

PoWeR

GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D1 D0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D1 D0

REX 3
GND TSOHLE. 3
REX 4 GND
TSOHLE. 4 NC C NO NC C NO NC C NO NC C NO

HO HLAHALA KA B

WWW.LUMIRING.COM

OSDP DOOR 3 USB LED MATLA

MONYAKO 4 RELAY 1 RELAY 2 RELAY 3

MOLAOLI oa phihlello ea ICON-Lite NETWORK

MONYAKO 2

MOHLOLI 2

MONYAKO 1

RELAY 4 BUTTON WIEGAND 1

BOEMO GND 12/24 TSOHLE. 2 GND REX 2 +VDC GND BUZZER G LED D1 D0 CONT. 1 GND REX 1 +VDC GND BUZZER G LED

MOFUTA-C

PoWeR

ICON-PRO/WW

Mokhoa oa Gate Master: Relay Inputs
Setšoantšo sa Khokahano ho ICON-Lite Controller
L2 L1

L3 L4

BA REX 3 GND CONT.3 REX 4 GND CONT.4 GND IN 1 GND IN 2 GND IN 3 GND KA 4

WWW.LUMIRING.COM

OSDP

MONYAKO 3

MONYAKO 4

Notlela 1

LOCK 2 AP 15

Notlela 3

LOTELA 4 KOPANO EA 100

MOSEBETSI OA SEHLOOHO SA USB MONYAKO OA MANTLA EA 2 oa LED
SEEMO MOFUTA-C

MOHLOLI 2

MONYAKO 1

MOHLOLI 1

PoWeR

L2 L1

l3 l4

GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D1 D0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D1 D0

REX 3
GND TSOHLE. 3
REX 4 GND
TSOHLE. 4 NC C NO NC C NO NC C NO NC C NO

HO HLAHALA KA B

WWW.LUMIRING.COM

OSDP DOOR 3 DOOR 4 RELAY 1 RELAY 2 RELAY 3 RELAY 4 BUTTON

MOLAOLI oa phihlello ea ICON-Lite NETWORK

USB LED MATLA A MNYAKO 2

MOHLOLI 2

MONYAKO 1

MOHLOLI 1

BOEMO GND 12/24 TSOHLE. 2 GND REX 2 +VDC GND BUZZER G LED D1 D0 CONT. 1 GND REX 1 +VDC GND BUZZER G LED

MOFUTA-C

PoWeR

ICON-PRO/WW

E fihla haufinyane! Mokhoa oa Gate Master: Sephetho sa OSDP
Setšoantšo sa Khokahano ho ICON-Lite Controller
OSDP

BA REX 3 GND CONT.3 REX 4 GND CONT.4 GND IN 1 GND IN 2 GND IN 3 GND KA 4

WWW.LUMIRING.COM

OSDP

MONYAKO 3

MONYAKO 4

Notlela 1

LOCK 2 AP 15

Notlela 3

LOTELA 4 KOPANO EA 100

MOSEBETSI OA SEHLOOHO SA USB MONYAKO OA MANTLA EA 2 oa LED
SEEMO MOFUTA-C

MOHLOLI 2

MONYAKO 1

MOHLOLI 1

PoWeR
OSDP

GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D1 D0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D1 D0

REX 3
GND TSOHLE. 3
REX 4 GND
TSOHLE. 4 NC C NO NC C NO NC C NO NC C NO

HO HLAHALA KA B

WWW.LUMIRING.COM

OSDP DOOR 3 DOOR 4 RELAY 1 RELAY 2 RELAY 3 RELAY 4 BUTTON

MOLAOLI oa phihlello ea ICON-Lite NETWORK

USB LED MATLA A MNYAKO 2

MOHLOLI 2

MONYAKO 1

MOHLOLI 1

BOEMO GND 12/24 TSOHLE. 2 GND REX 2 +VDC GND BUZZER G LED D1 D0 CONT. 1 GND REX 1 +VDC GND BUZZER G LED

MOFUTA-C

PoWeR

ICON-PRO/WW

Kena

E hokela sebakeng sa phihlello sa Wi-Fi
Ho hokela ho e ahiloeng web seva Mohato oa 1. Hokela sesebelisoa ho matla a +12 VDC. Emela hore sesebelisoa se qale. Mohato 2. Tobetsa konopo e haufi le lenakana ka potlako ebe o e lokolla ho bulela Wi-Fi hotspot. Mohato 3. Ho tswa ho hao PC kapa selefouno, batla Wi-Fi marangrang. Khetha sesebelisoa se bitsoang WW_MD_xxxxxxxx kapa WW_SD_xxxxxxxx ebe o tobetsa onnect. Mohato 4. Ka bareng ea aterese ea sebatli sa hau, kenya aterese ea IP ea feme (192.168.4.1) ebe o tobetsa "Enter." Emela hore leqephe le qalang le kene. Mohato oa 5. Kenya lebitso la mosebedisi le phasewete (haeba di se di setilwe) ebe o tobetsa "Enter." Haeba sesebelisoa se le secha kapa se se se lokiselitsoe pele, kenya login: admin, pass: admin123 ebe o tobetsa "Enter."

ICON-PRO/WW

Tsamaiso

Karolo ea Sistimi e bonts'a boemo ba hajoale ba sesebelisoa, tlhaiso-leseling e tsoetseng pele ea khokahano ea marang-rang, le tlhaiso-leseling ea mofuta oa sesebelisoa.

Kholomo ea Boemo ba Hajoale e na le: · Boemo ba khokahano le sesebelisoa sa ho para. · Matla a lets'oao la seea-le-moea. · Boemo ba khokahano ha o hokahantsoe le Wi-Fi
router. · Phepelo ea motlakase voltage level. Kholumo ea Marang-rang e na le: · Aterese ea IP e sebelisoang ke sesebelisoa. · Mokhoa oa netweke – Manual kapa Dynamic Host
Protocol ea Configuration (DHCP). · Mask oa marang-rang.

· Gateway. · Domain Name System (DNS). · Hypertext Transfer Protocol (HTTP) port e sebelisoang ke
sesebelisoa. Kholomo ea Hardware e na le: · Moetso oa sesebelisoa. · Nomoro ea serial ea sesebelisoa. · Mofuta oa firmware. · Mofuta oa Hardware. · Web phetolelo. · Phetolelo ea app programming interface (API).

ICON-PRO/WW

Marang-rang

Karolo ea Network e fana ka bokhoni ba ho hlophisa sebaka sa marang-rang sa Wi-Fi se hahelletsoeng, ho kenyelletsa ho hokela Marang-rang, ho fetola lebitso la marang-rang a Wi-Fi, le ho beha phasewete.

Netweke · Tobetsa sebakeng sa Lebitso la SSID ho batla
marang-rang a fumanehang a Wi-Fi ebe o kenya phasewete ho hokela. · Haeba netweke eo o hokelang ho yona e patilwe, emela diphetho mme o kenye lebitso la netweke ka bowena. · Khetha DHCP ho fumana li-setting tsa marang-rang kapa Manual ho kenya li-setting tsa marang-rang ka letsoho, ebe o tobetsa "Connect." Wi-Fi Access Point (AP) · Sebakeng sa "Local Wi-Fi AP Name", kenya lebitso la marang-rang la sesebelisoa. · Lebaleng la "Password", kenya phasewete ea khokahano (e sa beoang ka ho sa feleng). Mokhoa o patiloeng · Lebokose la ho hlahloba la "Enable Hidden Mode" le pata lebitso la marang-rang la sebaka sa phihlello sa sesebelisoa ha se batla.

· Ho hokela sesebelisoa ha se le maemong a patiloeng, o hloka ho tseba lebitso la sona mme o se kenye ka letsoho ha o hokela.
Sebali sa nako ea Wi-Fi · Sebakeng sa “Wi-Fi timer, min”, kenya boleng ho tsoa ho
1 ho isa ho metsotso e 60. Ha o kenya 0, AP e tla dula e le teng ha konopo ya tshebeletso e tobetswa. Boema-kepe ba HTTP · E sebelisoa ho fihlella Web segokahanyo sa sesebelisoa. · Ka ho feletseng, sesebelisoa se sebelisa port 80. Relay thibela thibelo Tlhokomeliso: Mosebetsi o ka lokisoa feela ho sesebelisoa sa lekhoba. · Sebopeho sena se thibela phetiso ho tloha ho thibela. · Haeba puisano le sesebelisoa sa master e lahlehile, li-relay tse khethiloeng li tla khutlela sebakeng sa tsona sa pele ka mor'a nako e behiloeng tšimong ea Timer.

ICON-PRO/WW

Tlhokomelo

Karolo ea Firmware e bonts'a mofuta oa hajoale oa firmware ea unit.
Tlhokomeliso: Ho khothalletsoa ho ntlafatsa sesebelisoa ho mofuta oa morao-rao oa firmware pele o sebelisoa.
Tlhokomeliso: Sesebelisoa se tlameha ho hokeloa Marang-rang 'me se haufi le router ea Wi-Fi nakong ea ntlafatso.
· Ho khoasolla mofuta o mocha oa firmware, hokela marang-rang a nang le phihlello ea Marang-rang karolong ea Network.
· Tobetsa konopo ea "Check & Update" 'me u eme ho fihlela ts'ebetso ea ntlafatso e phethoa.
· Fensetere ea modal e tla u susumelletsa hore u qalise sesebelisoa hape.
· Kamora ho qala bocha, netefatsa hore mofuta oa sesebelisoa o fetohile.
Tlhokomeliso: Nako ea ntlafatso e ipapisitse le boleng ba khokahano ea Marang-rang le mofuta oa firmware empa hangata e nka metsotso e 5.
Haeba ntlafatso e nka metsotso e fetang 5, qala sesebelisoa ka likhoka ka ho tima matla le ho leka ho ntlafatsa hape.
Ho hloleha ha motlakase kapa khokahano ea marang-rang

tšitiso nakong ea ntlafatso e ka baka phoso ea sesebelisoa sa firmware.
Haeba sena se etsahala, tlosa motlakase ho sesebelisoa ka metsotsoana e 10 ebe o kopanya hape.
Tlohela yuniti e butsoe metsotso e 5 ntle le ho leka ho hokela kapa ho kena ho web segokahanyi.
Yuniti e tla khoasolla mofuta oa morao-rao oa firmware o kileng oa sebelisoa ebe o qala ts'ebetso hape.
Karoloana ea Restart/Reset e etsa liketso tse latelang:
· Qala bocha – qala sesebelisoa bocha.
· Seta botjha – seta botjha di-setting tsohle tsa sesebediswa hore di be tsa feme.
Karoloana ea Ts'ireletso e sebelisetsoa ho fetola phasewete bakeng sa ho kena ka har'a sebopeho sa sesebelisoa:
· Kenya phasewete e ncha ea ho kena 'me u e netefatse.
· Sebelisa liphetoho ka ho tobetsa "Update."
Phasewete e ncha e ka sebelisoa nakong e tlang ha u kena ka har'a sebopeho sa sesebelisoa.

ICON-PRO/WW

Ntlafatso ea Firmware ka Cloud Server
Likarolo tsa sesebelisoa: · Mojule oa ho amohela Wi-Fi o tšehetsa khokahano
ho marang-rang a sebetsang ho 2.4 GHz feela. · O ka ka bowena kenya lebitso la SSID la
Marang-rang a Wi-Fi ho hokela ho marang-rang a patiloeng. Ho etsa joalo, ka mor'a ho fela ha lipatlisiso, qala ho thaepa lebitso la marang-rang tšimong ea hona joale. · Ho fetola li-parameter tsa khokahanyo ea Wi-Fi ho tloha ho ea hona joale ho ea ho e ncha ho etsahala feela ka mor'a hore sesebelisoa sa matla se se ke sa tsosolosoa. · Wi-Fi AP e hahelletsoeng e ea koaleha nako le nako ha sesebelisoa se qala bocha kapa ha nako e hahelletsoeng e felile. · Sesebelisoa se hloka palo e phahameng ea bandwidth ho jarolla mofuta oa firmware ho tsoa ho seva sa ntlafatso. Netefatsa khokahano ea boleng le boemo ba khokahano. • Apdeite ya sesebediswa e ka sitiswa haeba puisano ya radio le mohanyetsi e ntse e tswela pele. · Haeba khokahanyo e lahlehile kapa e tsosoa nakong ea download, ts'ebetso ea ntlafatso e tla hlakoloa molemong oa ho boloka mofuta oa hajoale oa firmware. · Sesebediswa se ka nna sa sebetsa hampe haeba motlakase o tinngwe nakong ya ho kenya apdeite. Boitokisetso ba pele: Netefatsa hore U TLA TLATSE MEHATO EOHLE E HLOKANG PELE O QALA HO NKAFATSA SESEBETSI SA HAO! HO HLOLEHWA HO LATELA MEHATO YA BOITSEBISO BAKENG SA TSA Ntlafatso HO KA Etsa Hore SESEBETSI SE SEKE HO BUA, HO BUA KA TSEBETSI E LEKANE, KAPA HO SEBETSA SEBETE. HA HO ETSA HO KENYA TSA Ntlafatso E Fosahetseng KA NAKO EA HO HLOKA MOTLATSI, SESEBETSI SE KA SONA HO SEBELISA HO FIHLELA MOSEBETSI OA RE THUSOA HO SEBELISA CABLE EA USB. · Hakolla lihokelo tsohle tse kentsoeng, tse tsoang, le tsa sebali ntle le phepelo ea motlakase. Sesebelisoa ha sea lokela ho amohela / ho fetisa data mme ha sea lokela ho sebetsana le boemo ba I / O nakong ea ntlafatso. • Tima matla ho se arabelang kit. Motho ea arabelang a ka 'na a tsoela pele ho fetisetsa boitsebiso ho sesebelisoa se ntseng se ntlafatsoa, se ka' nang sa sitisa mokhoa oa ho ntlafatsa 'me kahoo se lokela ho tima. · Beha sesebelisoa sebakeng se otlolohileng sa pono ho tsoa ho router ea WiFi e nang le phihlello ea Marang-rang sebakeng se sa feteng maoto a 3.3 ho isa ho 6.5 (1-2 metres). U ka sebelisa smartphone e nang le sebaka sa phihlello se kentsoeng (AP) joalo ka router ea Wi-Fi. · Pele o qala apdeite, seta matla bocha 'me u emele hore skrine ea sesebelisoa e kene. Liketso ka sesebelisoa: · Bulela Wi-Fi AP ka ho tobetsa konopo ea tšebeletso e lehlakoreng la sesebelisoa.

· Batla Wi-Fi networks on your mobile device and connect to the device’s AP. While connecting, check the box to connect automatically.
· Bula a Web sebatli 'me u thaepe 192.168.4.1 bareng ea aterese. Tobetsa Enter ebe u emela hore leqephe la ho kena le kene.
· Kenya sebaka sa hau sa ho kena le password. · Tobetsa Network tab ya mme o batla e
marang-rang a fumanehang a Wi-Fi a nang le phihlello ea Marang-rang. · Khetha marang-rang ao u a ratang, kenya
password ho hokela, ebe o tobetsa Connect. · Tobetsa System tab ya ho etsa bonnete ba hore
matla a lets'oao la khokahano ea Wi-Fi bonyane -40 dBm. Ho bala -35 dBm ke boleng bo holimo ba khokahanyo, 'me -100 dBm ke eona e mpe ka ho fetisisa kapa ha e eo. · E-ea tabeng ea Maintenance ebe o tobetsa konopo ea "Check & Update". Emela hore tokollo ea ntlafatso e phethe. U SE KE UA HŌKA SESEBETSI OA MOSEBETSI OA MOSEBETSI HA O ntse O daonlouda Ntlafatso. · Ha apdeite e phethiloe, tsebiso e tla hlaha e u khothaletsang ho qala bocha. Tobetsa "Ok" 'me u emetse hore sesebelisoa se qale hape ka molumo o utloahalang. · Potoloho ea matla sesebelisoa ebe u emela hore skrine e kene. Tobetsa konopo ea Down ho etsa bonnete ba hore mofuta oa firmware o fetohile ho ea hona joale. Tharollo ea mathata: · Molaetsa o reng "Phoso e etsahetse nakong ea ntlafatso" o kanna oa hlaha leha ho ka ba le tahlehelo ea nakoana ea puisano le sesebelisoa, nako ea karabo e fetile, kapa khokahanyo e sa tsitsang ho seva. Maemong ana, tsoelo-pele ea ntlafatso e tla emisoa ho boleng ba hajoale. Haeba ka mor'a hore phoso e hlahe, sesebelisoa se lula se hokahane 'me konopo ea "Check & Update" e tobetsa, leka ho ntlafatsa hape. · Haeba phoso e etsahala ho 95% kapa ho feta ea mojaro, ema metsotsoana e 30 'me u tsosolose phepelo ea motlakase ea sesebelisoa. Kamora ho qala sesebelisoa, hlahloba mofuta o bontšitsoeng skrineng. E ka 'na eaba firmware e kopilitsoe le ho kenngoa, empa sesebelisoa ha se e-s'o arabe ka mor'a kopo. · Haeba tšebelisano-'moho e se e sa fumanehe ka mor'a hore phoso e hlahe, hlahloba boemo ba khokahanyo ea Wi-Fi AP e hahiloeng. Etsa bonnete ba hore Wi-Fi AP ea sesebelisoa ea sebetsa 'me u ka hokela ho eona. Haeba o sa khone ho hokahanya le sesebelisoa, tsosolosa matla a sesebelisoa, kenya Wi-Fi AP, 'me u leke ho hokahanya hape.

ICON-PRO/WW

Hardware Reset

BA REX 3 GND CONT.3 REX 4 GND CONT.4 GND IN 1 GND IN 2 GND IN 3 GND KA 4

WWW.LUMIRING.COM

OSDP DOOR 3 DOOR 4 LOCK 1 LOCK 2 LOCK 3 LOCK 4 KOTANE

MOSEBETSI OA SEHLOOHO SA USB MONYAKO OA MANTLA EA 2 oa LED
SEEMO MOFUTA-C

MOHLOLI 2

MONYAKO 1

MOHLOLI 1

Hardware Reset
1. Tšoara konopo fatše bakeng sa metsotsoana e 10. 2. Emela ho phatsima ha bosehla bo boputsoa le beep e telele. 3. Lokolla konopo. 4. Li-beep tse tharo tse latellanang le beep e le 'ngoe e arohaneng e tla lla. 5. Lebone la LED le tla qala ho ba le khubelu ebe le fetohela ho boputsoa bo benyang. 6. Ts'ebetso ea ho tsosolosa hardware e phethiloe 'me yuniti e se e loketse ho sebetsa.

GND 12/24 CONT.2 GND REX 2 +VDC GND BUZZ. G LED D1 D0 CONT.1 GND REX 1 +VDC GND BUZZ. G LED D1 D0

ICON-PRO/WW

Bukana ea mantsoe
· +VDC – Positive voltage tobileng hona joale. · ID ea Ak'haonte - Sekhetho se ikhethileng se amanang le ak'haonte ea motho kapa ea mokhatlo, se sebelisetsoang ho netefatsa
le ho fumana litšebeletso. · ACU – Yuniti ya taolo ya phihlello. Sesebelisoa le software ea sona e thehang mokhoa oa ho fihlella le ho fana ka
kamohelo le ts'ebetso ea tlhahisoleseling ho tsoa ho babali, taolo ea lisebelisoa tsa tsamaiso, pontšo le ho rengoa ha tlhahisoleseling. · API - sebopeho sa lenaneo la ts'ebeliso. · BLE – Bluetooth Low Energy. · Thibela kahare - Mosebetsi oa ho kenya tšebetsong "block out" ka ketsahalo e "thibeloeng ke opareitara." E sebelisetsoa ho laola li-turnstile. · Thibela kantle – Output e kentswe tshebetsong ha “block In” e qala. · Bluetooth – Thekenoloji ya nako e kgutshwane ya puisano ya waelese e kgontshang phapanyetsano ya data ya waelese pakeng tsa disebediswa tsa dijithale. · BUZZ - Output bakeng sa ho hokahanya mohala oa 'mali o ikarabellang bakeng sa pontšo ea molumo kapa leseli. · Cloud – Sethala se thehiloeng marung kapa tšebeletso e fanoeng ho laola le ho beha leihlo tsamaiso ea taolo ea phihlello holim'a Marang-rang. E lumella batsamaisi ho laola litokelo tsa phihlello, ho beha leihlo liketsahalo, le ho ntlafatsa litlhophiso tsa sistimi ka ho sebelisa web-based interface, e fanang ka boiketlo le bonolo ba ho laola mokhoa oa ho laola phihlello ho tsoa kae kapa kae moo ho nang le khokahanyo ea Marang-rang. · Tšireletso ea likopi - Mokhoa o sebelisoang ho thibela ho kopitsa ho sa lumelloeng kapa ho pheta-pheta likarete tse bohlale ho sireletsa tsamaiso ea phihlello le ho thibela litlolo tse ka bang teng tsa ts'ireletso. · D0 – “Data 0.” Mola o monyenyane o nang le boleng bo utloahalang "0." · D1 – “Data 1.” Mola o monyenyane o nang le boleng bo utloahalang "1." · DHCP – Dynamic Host Configuration Protocol. Protocol ea marang-rang e lumellang lisebelisoa tsa marang-rang ho fumana aterese ea IP ka bo eona le likarolo tse ling tse hlokahalang bakeng sa ts'ebetso ho Transmission · Control Protocol/Internet Protocol TCP/IP network. Protocol ena e sebetsa ho mofuta oa "client-server". · DNS - Domain Name System ke sistimi e ajoang ea komporo bakeng sa ho fumana tlhaiso-leseling ea domain. Hangata e sebelisoa ho fumana aterese ea IP ka lebitso la moamoheli (khomphutha kapa sesebelisoa), ho fumana tlhaiso-leseling ea ho tsamaisa, le ho fumana li-node tsa ho sebeletsa bakeng sa liprothokholo sebakeng. · DPS - sensor ea boemo ba monyako. Sesebediswa se sebedisetswang ho lekola le ho fumana hore na lemati le ntse le le maemong a jwang, jwalo ka hore na lemati le butswe kapa le kwetswe. · Latch ea motlakase - Mochine oa ho notlela mamati o laoloang ka mokhoa oa elektroniki. · Emergency in – Kenyo bakeng sa maemo a tshohanyetso. · Encryption password - Senotlolo sa ts'ireletso ea data. · Marang-rang a Ethernet - Theknoloji ea marang-rang ea khomphutha e nang le mehala e sebelisang likhoele ho hokahanya lisebelisoa bakeng sa phetiso ea data le puisano. · Konopo ea Ho tsoa / Ho Kena / Bula - Kenyelletso ea logic eo, ha e kentsoe, e kenyang tlhahiso e lumellanang. E baka ketsahalo ho itshetlehile ka semelo se sebedisoang. · Tsoa/Kena/Bula – Phatlalatso e utloahalang e kengoang ts'ebetsong ha ho etsoa tlhahiso e tsamaellanang. E baka ketsahalo ho itshetlehile ka semelo se sebedisoang. · Relay ea kantle - Relay ka khokahano e omileng e ka bang teng bakeng sa taolo e hole ea phepelo ea motlakase. Relay e na le sehokelo se omileng, se sa kopanngoeng ka galvanically ho potoloho ea phepelo ea motlakase ea sesebelisoa. · GND - Sebaka sa litšupiso tsa motlakase. · HTTP – Hypertext Transfer Protocol. Protocol ea mantlha ea ho fetisa data, litokomane le lisebelisoa ka Marang-rang. · RFID Identifier 125 kHz - Boitsebiso ba Radio-frequency ho 125 kHz; Theknoloji ea nako e khuts'oane, ea maqhubu a tlase e nang le mefuta e tloaelehileng ea 7 cm ho isa ho 1 m. · RFID Identifier 13.56 MHZ - Boitsebiso ba Radio-frequency ho 13.56 MHz; theknoloji ea maqhubu a phahameng e nang le mefuta e khuts'oane ho isa ho e itekanetseng, e ka bang 10 cm. · Keypad – Sesebediswa sa ho kenya letsoho se nang le dikonopo kapa dikonopo tse ngata, tse sebediswang hangata bakeng sa ho kenya data ka letsoho kapa ho laola phihlello.

ICON-PRO/WW

Bukana ea mantsoe
· LED – Light emitting diode. · Loop sensor – Sesebelisoa se lemohang boteng kapa phallo ea sephethephethe sebakeng se itseng ka ho
sekoti sa motlakase se koetsoeng. Se sebedisoang ka mekoallo kapa dikgorong. · Magnetic Lock - Mochini oa ho notlela o sebelisang matla a motlakase ho sireletsa mamati, liheke kapa ho kena
lintlha. · MQTT – Message Queuing Telemetry Transport. Sistimi ea seva e hokahanyang melaetsa lipakeng tsa
bareki ba fapaneng. Morekisi o na le boikarabello, har'a lintho tse ling, bakeng sa ho amohela le ho sefa melaetsa, ho tsebahatsa bareki ba ngolisitseng molaetsa o mong le o mong, le ho ba romella melaetsa. · NC - Hangata e koetsoe. Tlhophiso ea lebitso la phetoho e koetsoeng maemong a kamehla mme e buloe ha e kentsoe. · CHE – E butsoe hangata. Tokiso ea lebitso la switch e butsoeng maemong a eona a kamehla mme e koala ha e kentsoe. · No-touch konopo - Konopo kapa switjha e ka kengoang ntle le ho ama 'mele, hangata e sebelisa theknoloji e haufi kapa e utloang motsamao. · Open collector - Phetoho ea phetoho ea transistor moo moqokeleli a siuoang a sa kopanngoa kapa a bulehile, hangata a sebelisetsoang ho beha matšoao. · OSDP – Open Supervised Device Protocol. Protocol e sireletsehileng ea puisano e sebelisoang lits'ebetsong tsa taolo ea phihlello bakeng sa phapanyetsano ea data ho sesebelisoa ho sesebelisoa. · Taolo ea ho feta - Mokhoa oa ho laola, ho beha leihlo, kapa ho fana ka tumello ea hore batho ba kene kapa ba tsoe sebakeng se sireletsehileng. · Phepelo ea motlakase - Sesebelisoa kapa sistimi e fanang ka matla a motlakase lisebelisoa tse ling, e li nolofalletsang ho sebetsa le ho sebetsa. · Radio 868/915 MHZ – Sistimi ea likhokahano e se nang mohala e sebetsang ho lihlopha tsa maqhubu tsa 868 MHz kapa 915 MHz. · Reader – Sesebediswa se hlahlobang le ho toloka datha ho tswa ho RFID kapa dikarete tse bohlale, tse sebediswang hangata bakeng sa taolo ya phihlello kapa boitsebahatso. · Revers byte order - Mokhoa oa ho hlophisa bocha tatellano ea li-byte mocheng oa data, hangata bakeng sa ho lumellana kapa ho fetolela data. · REX - Kopa ho tsoa. Sesebediswa sa taolo ya phihlello kapa konopo e sebediswang ho kopa ho tswa sebakeng se sireleditsweng. · RFID - Boitsebiso ba seea-le-moea-pono. Theknoloji ea phetisetso ea data e se nang mohala le boitsebahatso e sebelisa electromagnetic tags le babali. · RS-485 - Tekanyetso ea puisano ea serial e sebelisoang lits'ebetsong tsa indasteri le tsa khoebo, tse tšehetsang lisebelisoa tse ngata holim'a marang-rang a arolelanoang. · Strike lock – Motjhini wa ho notlela ka elektronike o lokollang sefe ya lemati kapa boutu ha o kentswe ke motlakase, o sebediswang hangata mekgweng ya taolo ya phihlello. · Terminal block – Sehokedi sa modular se sebedisetswang ho hokela le ho tiisa mehala kapa mehala tsamaisong ya motlakase le ya elektroniki. · Sehlooho - Boemong ba MQTT, leibole kapa sesupo sa melaetsa e hatisitsoeng, se nolofalletsang ba ngolisitseng ho sefa le ho amohela litaba tse itseng. · Notlolla ho kena - Kenyeletso kapa lets'oao le sebelisoang ho lokolla senotlolo, mokoallo kapa sesebelisoa sa ts'ireletso, se lumellang ho kena sebakeng se sirelelitsoeng pele. • Tlosa – Letshwao kapa letshwao le sebediswang ho lokolla loko, sethibelo, kapa sesebediswa sa tshireletso ho dumella ho tswa kapa ho bula. · Sebopeho sa Wiegand - Sebopeho sa data se sebelisoang lits'ebetsong tsa taolo ea phihlello, hangata bakeng sa ho fetisetsa data ho tloha ho babali ba likarete ho ea ho balaoli. · Wiegand interface - Sehokelo se tloaelehileng se sebelisoang lits'ebetsong tsa taolo ea phihlello ho buisana ka data lipakeng tsa babali ba likarete le liphanele tsa taolo ea phihlello. · Wi-Fi AP - Sebaka sa phihlello se se nang mohala. Sesebelisoa se lumellang lisebelisoa tse se nang mohala ho hokela marang-rang. · Tsela ea ho laola phihlello e se nang mohala - Sesebelisoa se laolang le ho hokahanya lisebelisoa tsa taolo ea phihlello e se nang mohala ho sistimi kapa marang-rang.

ICON-PRO/WW

Mehlala ea Babali e Tšehetsoeng

ICON-PRO/WW

Bakeng sa Lintlha Liphetoho kapa litokiso tse sa amoheloeng ka kotloloho ke mokha o ikarabellang bakeng sa tsamaiso li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa. Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa tšebeliso 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ho kamohelo ea seea-le-moea kapa ea thelevishene, e ka lekanyetsoang ka ho tima thepa le ho tima, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e 'ngoe kapa tse ling tsa mehato e latelang: - Ho tsamaisa kapa ho suthisa thepa e amoheloang sebakeng se seng. lenakana. - Eketsa karohano lipakeng tsa sesebelisoa le moamoheli. - Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona. — Ikopanye le morekisi kapa setsebi se nang le boiphihlelo ba seea-le-moea/TV bakeng sa thuso Sesebelisoa sena se lumellana le karolo ea 15 ea melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang (1) sesebelisoa sena se ke ke sa baka tšitiso e kotsi, 'me (2) sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng. Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a FCC e behiloeng bakeng sa tikoloho e sa laoleheng. Thepa ena e lokela ho kengoa le ho sebetsoa ka sebaka sa bonyane 20cm lipakeng tsa radiator le 'mele oa hau.

ICON-PRO/WW

Litokomane / Lisebelisoa

LUMIRING ICON-PRO Access Controller Ka Wireless Gateway [pdf] Buka ea Taelo
ICON-PRO, ICON-PRO Access Controller With Wireless Gateway, Access Controller With Wireless Gateway, Controller With Wireless Gateway, Wireless Gateway, Gateway

Litšupiso

Bukana ea Mosebelisi

ICON-PRO Access Controller Ka Wireless Gateway

Litlhaloso

Tlhahisoleseding ya Sehlahiswa

Lisebelisoa tsa Litekanyo

Controller & Gate Slave Mode Connection Terminals

Litlhaloso tsa Radio Transceiver

Keletso ea Bohlokoa ka Liphetoho tsa Lisebelisoa

Litaelo tsa Tšebeliso ea Sehlahisoa

Kemiso le Khokahano

Ho rarolla mathata a tloaelehileng

FAQ (Lipotso Tse Botsoang Hangata)

P: Nka fumana mofuta oa morao-rao oa buka ea mosebelisi hokae?

P: Ke seta sesebelisoa joang ho li-setting tsa feme?

Litokomane / Lisebelisoa

Litšupiso

Tlohela maikutlo

Hlakola karabo