PowerSync® PS4 Sesebelisoa sa data LS6550 Litaelo tsa ho Hloma
TSOHLE 2
 |
| IKHETHEHILENG SEBELISA MATLA
Ho hloleha ho arola phepelo ea motlakase pele o kenya kapa ho e lokisa ho ka baka mollo, kotsi e mpe, ho tsukutloa ke motlakase, lefu mme ho ka senya sesebelisoa. |
Tiisetso ea Sehlahisoa ha e na letho haeba sehlahisoa se sa kengoa ho latela litaelo tsa ho kenya le ho latela khoutu ea lehae ea motlakase.
HA HO LITHUTO TSA MATLA U SE KE UA SEBELISA SILICONE KA NAKO E KA NTLE
BOLOKA ELECTRONIKE E SE KE UA TS'OA KA TOKA LE MONG
U SE KE UA HOSE KAPA HO KHATELLA HO HLOEKISA
BALA LITAELO TSOHLE TSA BOPHELO PELE
› Latela litaelo ka hloko; ho hloleha ho etsa joalo ho tla felisa tiisetso.
Netefatsa hore ho instola ho ikamahanya le melao ea lehae le maemo a sebetsang.
Boloka PowerSync e se na lithōle le sebakeng se fumanehang habonolo.
Sebedisa feela lisebelisoa tsa motlakase tsa Lumascape, le likhoele tse etellang pele.
› Netefatsa hore motlakase oa motlakase oa motlakase o sirelelitsoe.
› Le ka mohla u se ke ua etsa likhokahano ha motlakase o hoketsoe.
> Se ke oa etsa liphetoho kapa oa fetola sehlahisoa.
› Mahokelo le LS6550 Data Injector e lokela ho bolokoa e hloekile ebile e omme ka linako tsohle.
› Ho hlokahala terminator ea PowerSync ha o qeta ho sebetsa.
Lihlahisoa le litlhaloso li ka fetoha ntle le tsebiso.
IN0194-220729
ARCHITECTURAL & FACADE LESED | lumascape.com
- DMX ka
- TAOLI POTSO
E ka ba 0-10 V kapa lets'oao la taolo la PWM - DIN SERENANE KHOLO
Likhetho tse peli (2) tsa ho kenya, ho kenya ka lehlakoreng kapa ka morao - DMX TERMINATOR
LS6407-R - 30-48 Vdc Power In
30-48 Vdc boholo ho tsoa ho PSU - MATLA TŠOA
Hokela thapo ea moetapele ea PowerSync ho leseli la pele ka ketane
Laola ka 0-10 V kapa PWM Input
MOHATO 1
Hlobola likhoele tsa terata ka bomong tsa thapo ea data ho latela litlhaloso tse ka tlase.
- Letshwao
- TSAMAILENG KAPA TIMA
0.2-1.5 limilimithara
24-16 AWG
MOHATO 2
E hulela holimo ho tlosa block block.
MOHATO 3
U sebelisa screwdriver, lokolla screw ho bula theminale le ho kenya terata e kholehileng, ebe u screw back up.
MOHATO 4
Khokahanya terminal block hape.
| Label |
Khethollo |
||
| Sebelisa 0-10 V Sinking Dimmers¹ |
Sebelisa 0-10 V Ho fumana Dimmers² |
PWM³ | |
| 10 V Tsoa | 10 V mohloli | Ha e kopane | Ha e kopane |
| Ch 1 ka | Ho khutla ha Channel 1 | Mocha oa 1 + | Mocha oa 1 + |
| Ch 2 ka | Ho khutla ha Channel 2 | Mocha oa 2 + | Mocha oa 2 + |
| Com - | Ha e kopane | E tloaelehileng - | E tloaelehileng - |
¹ Mokhoa oa 5, ² Mokhoa oa 3, ³ Mokhoa oa 4
Sheba tafoleng ea Mode Switch
Lihokelo tsa PSU
MOHATO 1
Hlobola likhoele tsa terata ka bomong tsa thapo ea data ho latela litlhaloso tse ka tlase.
- Matla
- 1.3-6 mm²/16-8 AWG
MOHATO 2
Sututsa li-slider tsa Orange ka hare ebe u theohela fatše ho tlosa block block.
MOHATO 3
U sebelisa screwdriver, kenya ka sekoting, sutumelletsa ho tšoara terminal e bulehileng ha u ntse u kenya terata e kholehileng.
MOHATO 4
Khokahanya terminal block hape.
| Mmala |
PowerSync Out Cable |
|
2-Motheo |
|
| Khubedu |
Matla + |
| Ntsho |
Matla - |
Ho hokela Luminaires ka PowerSync Leader Cable
MOHATO 1
Hlobola likhoele tsa terata ka bomong tsa thapo ea data ho latela litlhaloso tse ka tlase.
- Letshwao
- TSAMAILENG KAPA TIMA
0.2-1.5 limilimithara
24-16 AWG
MOHATO 2
Sututsa li-slider tsa Orange ka hare ebe u theohela fatše ho tlosa block block.
MOHATO 3
U sebelisa screwdriver, kenya ka sekoting, sutumelletsa ho tšoara terminal e bulehileng ha u ntse u kenya terata e kholehileng.
MOHATO 4
Khokahanya terminal block hape.
| Mmala |
PowerSync ka Cable |
|
3-Motheo |
|
| Khubedu |
Matla + |
| Ntsho |
Matla - |
| namunu |
Lintlha + |
10 Position Mode Switch
| Label | Maikutlo | |
MOKHOA OA TŠEBELETSO  |
0 | DMX/RDM Feela |
| 1 | DMX/RDM + Relay | |
| TEKO MEKHOA |
2 | Lekola Likanale Tsohle |
| 3 | Lekola Likanale Tsohle li Buletsoe | |
| 4 | Test 4 Color Cycle | |
| 5 | 0-10 V Ho fumana chelete | |
| 6 | 0-10 V Ho teba | |
| 7 | CRMX (Ka boikhethelo) | |
| 8 | USB | |
| 9 | Firmware Update |
HLOKOMELA:
- Lenane la tšebetso ke la Generation 2 PowerSync Injection FEELA.
- Moloko oa 2 o tšoailoe letlapeng la sefahleho la leibole ho PowerSync Injector.
LS6550 e fana ka mefuta e meraro (3) ea liteko bakeng sa lisebelisoa tsa PowerSync. Tsena li hloka feela mabone a hokahantsoeng le matla, 'me ha ho na lets'oao le hokahaneng la ho kenya. Haeba lets'oao la ho kenya le hoketsoe, LS6550 e ke ke ea arabela lets'oao lena ka mekhoa efe kapa efe e ka tlase.
ELA HLOKO: Matshwao ana a teko a sebetsa ho yuniti e amehang ya PowerSync feela e ke ke ya fetiswa ka dikgokelo tsa DMX/RDM haeba diyuniti tse ngata tsa LS6550 di hoketswe.
Leseli la Lipontšo
MOEKETSI MAKHANYA
| Letšoao la LED | Ketsahalo | Ponahalo |
| Power In | Matla a ho kenya ka sehloohong | E kgantsha |
| Tlosa Matla | Phetiso ea motlakase e koetsoeng | E kgantsha |
| Sephethephethe sa DMX | Sephethephethe sa DMX se fumanoe Lets'oao le fifalang le fumanoe |
Ho benya ka lets'oao Ho panya ha 1.2 Hz, ho lekana le boemo ba ho kenya |
| Sephethephethe sa PS4 | Tlhahiso ea PowerSync e lumelletsoe | E kgantsha |
| Boemo | E qalang Ts'ebetso e tloaelehileng |
3 e phatsima 1 flash, metsotsoana e meng le e meng e 5 |
| Ho fumanoe phoso ea potoloho Ho feta voltage Potoloho e khutšoanyane |
Ho benya ha 2, metsotsoana e meng le e meng e mehlano Ho benya ha 3, metsotsoana e meng le e meng e mehlano |
|
| Ho fumanoe phoso ea PowerSync Phoso ea matla / mocheso o fetang |
Ho benya ha 4, metsotsoana e meng le e meng e mehlano | |
| Hlahloba | Relay e butsoe Phetolelo ea matsoho Ho qala/Phoso e fumanwe |
Ho tima motlakase, ho tima Ho benya E kgantsha |
| USB | USB e hokahane | E khantša / e khantša ka data |
RJ45
Plug Socket Pin 1
DMX PIN LIEKETSO
| Letshwao |
Mofuta oa Sehokelo RJ45 Std |
| Lintlha + |
1 |
| Lintlha - |
2 |
| Fatše |
7 |
ARCHITECTURAL & FACADE LESED
Litokomane / Lisebelisoa
 |
LUMASCAPE PowerSync PS4 Data Injector LS6550 [pdf] Buka ea Taelo PowerSync PS4, Data Injector, LS6550, PowerSync PS4 Data Injector, Data Injector LS6550, PowerSync PS4 Data Injector LS6550 |
