Litaba
pata
LS ELECTRIC XBL-EIMT Selaoli sa Monahano se Reriloeng
Tlhahisoleseding ya Sehlahiswa
Litlhaloso:
- C/N: 10310001140
- Sehlahisoa: Selaoli sa Merero ea Logic XGB RAPIEnet XBL-EIMT/EIMH/EIMF
- Boholo: 100mm
Litaelo tsa Tšebeliso ea Sehlahisoa
Kemiso:
- Netefatsa hore mohloli oa matla o khaotsoe pele o kenya.
- Beha PLC ka mokhoa o sireletsehileng sebakeng se loketseng u sebelisa lisebelisoa tse nepahetseng.
- Hokela lithapo tse hlokahalang le li-peripheral ho latela setšoantšo se fanoeng.
Seta le Tlhophiso:
- Matla ho PLC 'me u fihlele litlhophiso tsa tlhophiso.
- Beha liparamente tsa ho kenya le ho tsoa ho latela litlhoko tsa hau tse ikhethileng tsa kopo.
- Boloka litlhophiso tsa tlhophiso pele u tsoela pele.
Ts'ebetso:
- Qala PLC ka ho latela litaelo tsa moetsi.
- Lekola sistimi bakeng sa ts'ebetso e nepahetseng 'me u hlahlobe matšoao afe kapa afe a phoso.
- Kopana le PLC u sebelisa sebopeho se fanoeng bakeng sa merero ea taolo le ho beha leihlo.
LBH
- P: Ke lokela ho etsa eng haeba PLC e bontša khoutu ea phoso?
- A: Sheba buka ea mosebelisi bakeng sa lethathamo la likhoutu tsa liphoso le tharollo e tsamaisanang le tsona. Haeba bothata bo ntse bo tsoela pele, ikopanye le tšehetso ea bareki bakeng sa thuso e eketsehileng.
- P: A na nka holisa bokhoni ba PLC ba ho kenya letsoho?
- A: E, ka tloaelo u ka holisa bokhoni ba I/O ba PLC ka ho eketsa li-module tsa katoloso kapa liraka. Sheba litokomane bakeng sa likhetho tse lumellanang tsa katoloso.
Tataiso ena ea ho kenya e fana ka tlhaiso-leseling e bonolo ea ts'ebetso kapa taolo ea PLC. Ka kopo bala ka hloko leqephe lena la data le libuka pele u sebelisa lihlahisoa. Haholo-holo bala litemoso ebe u tšoara lihlahisoa hantle.
Litlhokomelo tsa Tšireletso
Moelelo oa lengolo la tlhokomeliso le tlhokomeliso
TLHOKOMELO
- TEMOSO e supa boemo bo ka bang kotsi, boo haeba bo sa qojoe, bo ka bakang lefu kapa kotsi e mpe
TLHOKOMELO
- TLHOKOMELO e supa boemo bo ka bang kotsi, boo, ha bo sa qojoe, bo ka bakang kotsi e nyane kapa e itekanetseng. E ka boela ea sebelisoa ho lemosa khahlanong le mekhoa e sa sireletsehang
TLHOKOMELO
- Se ke oa ikopanya le lits'oants'o ha motlakase o sebelisoa.
- Etsa bonnete ba hore ha ho na litaba tsa tšepe tse tsoang kantle ho naha.
- Se ke oa sebelisa betri (tefisa, harola, e otla, e khuts'oane, e sollang).
TLHOKOMELO
- Etsa bonnete ba hore u sheba rated voltage le tlhophiso ea terminal pele ho terata
- Ha o kenya lithapo, tiisa screw ea "terminal block" ka mefuta e boletsoeng ea torque
- Se ke oa kenya lintho tse tukang linthong tse tikolohong
- Se ke oa sebelisa PLC sebakeng sa ho thothomela ka kotloloho
- Ntle le basebeletsi ba litšebeletso tsa litsebi, Se ke oa qhaqha kapa oa lokisa kapa oa fetola sehlahisoa
- Sebelisa PLC tikolohong e kopanang le lintlha tse akaretsang tse fuperoeng ke database ena.
- Etsa bonnete ba hore mojaro o kantle ha o fete tekanyetso ea module ea tlhahiso.
- Ha u lahla PLC le betri, e tšoare joalo ka litšila tsa indasteri.
- Letšoao la I/O kapa mohala oa puisano o tla kengoa ka terata bonyane 100mm hole le leqhubu le phahamengtagthapo kapa mohala oa motlakase.
Tikoloho ya Tshebetso
Ho kenya, hlokomela maemo a ka tlase
| Che | Ntho | Tlhaloso | Standard | |||
| 1 | Mocheso oa tikoloho. | 0 ~ 55℃ | – | |||
| 2 | Mocheso oa polokelo. | -25 ~ 70 ℃ | – | |||
| 3 | Mongobo wa tikoloho | 5 ~ 95%RH, e sa fokotseng | – | |||
| 4 | Mongobo wa polokelo | 5 ~ 95%RH, e sa fokotseng | – | |||
|
5 |
Ho hanyetsana le Vibration |
Ho thothomela nako le nako | – | – | ||
| Khafetsa | Ho potlakisa | Amptsebo | Nomoro |
Tlhaloso: IEC 61131-2 |
||
| 5≤f<8.4㎐ | – | 3.5 limilimithara | Ka makhetlo a 10 ka lehlakoreng le leng le le leng
bakeng sa X LE Z |
|||
| 8.4≤f≤150㎐ | 9.8㎨(1g) | – | ||||
| Ho thothomela ho sa feleng | ||||||
| Khafetsa | Ho potlakisa | Amptsebo | ||||
| 5≤f<8.4㎐ | – | 1.75 limilimithara | ||||
| 8.4≤f≤150㎐ | 4.9㎨(0.5g) | – | ||||
Sebetsa Tšehetso Software
Bakeng sa tlhophiso ea sistimi, mofuta o latelang oa hlokahala
- XBC Series : SU(V1.5 kapa ka holimo), H(V2.4 kapa ka holimo), U(V1.1 kapa ka holimo)
- XEC Series : SU(V1.4 kapa ka holimo), H(V1.8 kapa ka holimo), U(V1.1 kapa ka holimo)
- XBM Series : S(V3.5 kapa ka holimo), H(V1.0 kapa ka holimo)
- XG5000 Software : V4.00 kapa ka holimo
Lisebelisoa le Litlhaloso tsa Cable
Cable e khothaletsoa bakeng sa thapo ea CAT5E holim'a thapo ea S-FTP. Mefuta ea li-cable e fapana ho ea ka tlhophiso ea sistimi ea hau le tikoloho. Ka kopo ikopanye le mofani oa thepa ea litsebi pele u kenya.
Motlakase Tšobotsi
| Ntho | Yuniti | Boleng | Boemo |
| Ho hanyetsa mokhanni | Ω/km | 93.5 Kapa ka tlase | 25 ℃ |
| MoqtagEndurance(DC) | V/1min | 500V | Moeeng |
| Insulation resistance(Mits) | MΩ-km | 2,500 | 25 ℃ |
| Impedans ea sebopeho | Ω | 100±15 | 10MHz |
| Khatholoho | Db/100m Kapa ka tlase ho moo | 6.5 | 10MHz |
| 8.2 | 16MHz | ||
| 9.3 | 20MHz | ||
| Haufi le qetellong crosstalk Attenuation | Db/100m Kapa ka tlase ho moo | 47 | 10MHz |
| 44 | 16MHz | ||
| 42 | 20MHz |
Lebitso la likarolo le boholo (mm)
Ena ke karolo e ka pele ea sehlahisoa. Sheba lebitso le leng le le leng ha o sebelisa sistimi. Ho fumana lintlha tse ling, sheba bukana ea mosebelisi.
Lintlha tsa LED
| Silika | Boemo ba LED | ||
| On | panya | E tima | |
| MATSHA | Matla a ho sebetsa 'me CPU e tloaelehile
ts'ebetso |
– | Ho tima 'me CPU e sa tloaeleha
ts'ebetso |
| HS | Ha High Speed Link
tšebeletso e lumelloa |
– | Ha High Speed Link
tšebeletso e tima |
| P2P | Ha tšebeletso ea P2P e buletsoe | – | Ha tšebeletso ea P2P e tima |
| PADT | Ha XG5000 e hole
kgokelo e butswe |
– | Ha XG5000 e hole
khokahano ea tima |
| RINGANG | CH1, CH2 Ho theha marang-rang a reng | CH1, CH2 Fetola ho tloha ho selikalikoe ho ea ho moleng
marangrang |
Ho theha marang-rang a marang-rang |
| RELAYO | Ha liforeimi li fetisoa | – | – |
| LINK | Ha khokahano ea marang-rang theha | – | – |
| KETSAHALO |
– |
Ha puisano e
tloaelehileng |
– |
| CHK | Ho na le li-module tseo
seteishene no. e tšoana. |
– | – |
| PHOTO | Ho na le li-module tseo seteishene sa tsona sa No. e tšoana le che.
ya boikemelo. |
– |
– |
| ERR | Ha hardware e na le phoso | – | – |
Ho kenya / ho tlosa li-module
Mona ho hlalosa mokhoa oa ho hokela module ka 'ngoe setsing kapa ho e tlosa.
Ho kenya module
- Tlosa Sekoaelo sa Katoloso sehlahisoa.
- Sututsa sehlahisoa 'me u se kopanye ka tumellano le Hook For Fixation ea mahlakore a mane le Hook For Connection.
- Kamora ho hokahanya, sutumelletsa Hook For Fixation mme o e lokise ka botlalo.
Ho tlosa mojule
- Sututsa Hook Bakeng sa ho Khaoha, ebe o tlosa sehlahisoa ka matsoho a mabeli.
(Se ke oa hlakola sehlahisoa ka likhoka)
Wiring
Wiring bakeng sa Puisano
- 10/100BASE-TX's max.extended length between nodes ke 100m.
- Mojule ona oa switjha o fana ka ts'ebetso ea Auto Cross Over e le hore mosebelisi a ka sebelisa mohala o otlolohileng le o otlolohileng.
Tiisetso
- Nako ea tiisetso ke likhoeli tse 36 ho tloha ka letsatsi la tlhahiso.
- Tlhahlobo ea pele ea liphoso e lokela ho etsoa ke mosebelisi. Leha ho le joalo, ka kopo, LS ELECTRIC kapa baemeli ba eona ba ka etsa mosebetsi ona ka tefiso. Haeba sesosa sa phoso se fumanoa e le boikarabelo ba LS ELECTRIC, tšebeletso ena e tla ba ntle ho tefo.
- Mekhahlelo ho tsoa ho tiisetso
- Ho nkela sebaka sa likarolo tse ka sebelisoang le tse lekanyelitsoeng tsa bophelo (mohlala, li-relay, fuse, capacitor, libeteri, li-LCD, joalo-joalo)
- Ho hloleha kapa tshenyo e bakilweng ke maemo a sa lokang kapa ho tshwara ka ntle ho tse boletsweng bukeng ya mosebedisi
- Ho hloleha ho bakoang ke mabaka a kantle a sa amaneng le sehlahiswa
- Ho hloleha ho bakoang ke liphetoho ntle le tumello ea LS ELECTRIC
- Tšebeliso ea sehlahisoa ka mekhoa e sa lebelloang
- Ho hlōleha ho ke keng ha boleloa esale pele / rarolloa ke theknoloji ea morao-rao ea saense nakong ea tlhahiso
- Ho hloleha ka lebaka la mabaka a kantle joalo ka mollo, matla a sa tloaelehangtage, kapa likoluoa tsa tlhaho
- Linyeoe tse ling tseo LS ELECTRIC e sa ikarabelleng ho tsona
- Bakeng sa tlhaiso-leseling e batsi ka tiisetso, ka kopo sheba bukana ea mosebelisi.
- Likahare tsa tataiso ea ho instola li ka fetoha ntle le tsebiso bakeng sa ntlafatso ea ts'ebetso ea sehlahisoa.
LS ELECTRIC Co., Ltd
- www.ls-electric.com
- 10310001140 V4.6 (2024.6)
- E-mail: automation@ls-electric.com
- Ntlo-kholo/Seoul Office Tel: 82-2-2034-4033,4888,4703
- LS ELECTRIC Shanghai Office (Chaena) Tel: 86-21-5237-9977
- LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) Mohala: 86-510-6851-6666
- LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) Mohala: 84-93-631-4099
- LS ELECTRIC Middle East FZE (Dubai, UAE) Mohala: 971-4-886-5360
- LS ELECTRIC Europe BV (Hoofddorf, Netherlands) Tel: 31-20-654-1424
- LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan) Mohala: 81-3-6268-8241
- LS ELECTRIC America Inc. (Chicago, USA) Tel: 1-800-891-2941
- Fektheri: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnamdo, 31226, Korea
Khoutu ea QR
Litokomane / Lisebelisoa
 |
LS ELECTRIC XBL-EIMT Selaoli sa Monahano se Reriloeng [pdf] Bukana ea Mosebelisi XBL-EIMT, EIMH, EIMF, XBL-EIMT Programmable Logic Controller, XBL-EIMT, Programmable Logic Controller, Logic Controller, Controller |