LS ELECTRIC XBL-EIMT Njikwa Logic Programmable

Ozi ngwaahịa

Nkọwapụta:

• C/N: 10310001140
• Ngwaahịa: Programmable Logic Controller XGB RAPIEnet XBL-EIMT/EIMH/EIMF
• Akụkụ: 100mm

Ntuziaka ojiji ngwaahịa

Nwụnye:

1. Gbaa mbọ hụ na agbapụrụ isi iyi ike tupu echichi.
2. Wụnye PLC na nchekwa na ebe dabara adaba site na iji ngwaike dabara adaba.
3. Jikọọ eriri ndị dị mkpa na mpụta dịka eserese enyere.

Nhazi na nhazi:

1. Ike na PLC wee nweta ntọala nhazi.
2. Tọọ ntọala ntinye na mmepụta dabere na ngwa ngwa gị akọwapụtara.
3. Chekwaa ntọala nhazi tupu ịga n'ihu.

Ọrụ:

1. Malite PLC site na isoro ntuziaka onye nrụpụta.
2. Nyochaa sistemụ maka ịrụ ọrụ kwesịrị ekwesị wee lelee ihe ngosi njehie ọ bụla.
3. Mmekọrịta na PLC site na iji interface enyere maka njikwa na nleba anya.

FAQ

• Ajụjụ: Kedu ihe m ga-eme ma ọ bụrụ na PLC gosipụtara koodu njehie?
  • A: Rụtụ aka na ntuziaka onye ọrụ maka ndepụta nke koodu njehie na ngwọta ha kwekọrọ. Ọ bụrụ na nsogbu ahụ ka dị, kpọtụrụ nkwado ndị ahịa maka enyemaka ọzọ.
• Ajụjụ: Enwere m ike ịgbasa ikike ntinye / mmepụta PLC?
  • A: Ee, ị nwere ike na-agbasawanye ikike I/O PLC site na ịgbakwunye modul mgbasawanye ma ọ bụ racks. Rụtụ aka na akwụkwọ maka nhọrọ mgbasa dakọtara.

Ntuziaka nwụnye a na-enye ozi ọrụ dị mfe ma ọ bụ njikwa PLC. Biko gụọ nke ọma mpempe data na akwụkwọ ntuziaka tupu i jiri ngwaahịa. Karịsịa gụchaa ịkpachara anya wee jikwaa ngwaahịa ndị ahụ nke ọma.

Akpachara anya maka nchekwa

Pụtara ịdọ aka ná ntị na akara ịkpachara anya

Ịdọ aka ná ntị

• ỊDỌ AKA NA NTỊ na-egosi ọnọdụ nwere ike ịdị ize ndụ nke, ma ọ bụrụ na ewezugaghị ya, nwere ike ịkpata ọnwụ ma ọ bụ mmerụ ahụ dị ukwuu.

kpachara anya

• Ịkpachara anya na-egosi ọnọdụ nwere ike ịdị ize ndụ nke, ma ọ bụrụ na ewepụghị ya, nwere ike bute obere mmerụ ahụ ma ọ bụ obere. Enwere ike iji ya dọọ aka na ntị megide omume adịghị mma

Ịdọ aka ná ntị

1. Not kpọtụrụ ndị ọnụ mgbe ejiri ike.
2. Jide n'aka na ọ dịghị ihe ọla mba ọzọ.
3. Ejikwala batrị ahụ (ịchaji, kwakọba, ịkụ aka, mkpụmkpụ, ire ere).

kpachara anya

1. Jide n'aka na ịlele ọkwa voltage na ọdụ ọdụ tupu wiring
2. Mgbe ị na-ekesa wiwi, mee ka ịghasa ngọngọ njedebe jiri oke torque akọwapụtara
3. Awụnyela ihe ndị na-ere ọkụ na gburugburu
4. Ejila PLC na gburugburu ebe ịma jijiji ozugbo
5. Ewezuga ndị ọrụ ọrụ ọkachamara, ewepụla ma ọ bụ dozie ma ọ bụ gbanwee ngwaahịa a
6. Jiri PLC na gburugburu na-ezute nkọwapụta izugbe dị na mpempe akwụkwọ data a.
7. Jide n'aka na ibu mpụga agaghị agafe ogo nke modul mmepụta.
8. Mgbe ị na-atụfu PLC na batrị, were ya dị ka ihe mkpofu ụlọ ọrụ.
9. A ga-ekenye akara ngosi I/O ma ọ bụ ahịrị nzikọrịta ozi ma ọ dịkarịa ala 100mm pụọ na nnukwu voltajitage cable ma ọ bụ ike eriri.

Environment na-arụ ọrụ

Iji wụnye, debe ọnọdụ ndị dị n'okpuru

Mba	Ihe	Nkọwapụta				Ọkọlọtọ
1	Ihere temp.	0 ~ 55 ℃				–
2	Okpomọkụ nchekwa.	-25 ~ 70 ℃				–
3	iru mmiri gburugburu	5 ~ 95% RH, na-abụghị condensing				–
4	iru mmiri nchekwa	5 ~ 95% RH, na-abụghị condensing				–
5	Nguzogide ịma jijiji	ịma jijiji mgbe ụfọdụ			–	–
		Ugboro ugboro	Osooso	Amplitude	Nọmba	IEC 61131-2
		5≤f <8.4㎐	–	3.5mm	10 ugboro na ntụziaka ọ bụla maka X na Z
		8.4≤f≤150㎐	9.8 (1 g)	–
		ịma jijiji na-aga n'ihu
		Ugboro ugboro	Osooso	Amplitude
		5≤f <8.4㎐	–	1.75mm
		8.4≤f≤150㎐	4.9 (0.5 g)	–

Ngwanrọ nkwado dị

Maka nhazi usoro, ụdị a dị mkpa

1. XBC Series: SU (V1.5 ma ọ bụ n'elu), H (V2.4 ma ọ bụ n'elu), U (V1.1 ma ọ bụ n'elu)
2. XEC Series: SU (V1.4 ma ọ bụ n'elu), H (V1.8 ma ọ bụ n'elu), U (V1.1 ma ọ bụ n'elu)
3. Usoro XBM: S (V3.5 ma ọ bụ n'elu), H (V1.0 ma ọ bụ n'elu)
4. Software XG5000: V4.00 ma ọ bụ karịa

Ngwa na nkọwa USB

A na-atụ aro eriri maka CAT5E n'elu eriri S-FTP. Ụdị USB dịgasị iche dabere na nhazi usoro gị na gburugburu ebe obibi gị. Biko kpọtụrụ ọkachamara soplaya tupu echichi.

Njirimara Eletriki

Ihe	Nkeji	Uru	Ọnọdụ
Nguzogide ndị nduzi	Ω/km	93.5 ma ọ bụ obere	25 ℃
Voltagna ntachi obi (DC)	V/1 nkeji	500V	N'ikuku
Nguzogide mkpuchi (Nkeji)	MΩ-km	2,500	25 ℃
Mgbochi njirimara	Ω	100±15	10Mhz
Attenuation	Db/100m ma ọ bụ obere	6.5	10Mhz
		8.2	16Mhz
		9.3	20Mhz
Attenuation crosstalk dị nso	Db/100m ma ọ bụ obere	47	10Mhz
		44	16Mhz
		42	20Mhz

Aha akụkụ na akụkụ (mm)

Nke a bụ akụkụ n'ihu nke ngwaahịa ahụ. Rụtụ aka na aha ọ bụla mgbe ị na-arụ ọrụ sistemụ. Maka ozi ndị ọzọ, rụtụ aka na ntuziaka onye ọrụ.

Nkọwa LED

Silk	Ọnọdụ LED
	On	kpuo ìsì	Gbanyụọ
Gbaa ọsọ	Gbanyụọ na CPU nkịtị ọrụ	–	Gbanyụọ na CPU adịghị mma ọrụ
HS	Mgbe High Speed ​​Njikọ ọrụ na-enyere	–	Mgbe High Speed ​​Njikọ gbanyụọ ọrụ
P2P	Mgbe agbanyere ọrụ P2P	–	Mgbe gbanyụọ ọrụ P2P
PADT	Mgbe XG5000 dịpụrụ adịpụ njikọ na-enyere	–	Mgbe XG5000 dịpụrụ adịpụ gbanyụọ njikọ
Mgbanaka	CH1, CH2 Ring netwọk guzosie ike	CH1, CH2 Gbanwee site na mgbanaka gaa na ahịrị netwọk	Mepụta netwọkụ ahịrị
KWESỊRỊ	Mgbe agbasara fremu	–	–
Njikọ	Mgbe njikọ netwọk guzobe	–	–
ACT	–	Mgbe nkwukọrịta bụ nkịtị	–
CHK	E nwere modul onye ọdụ ụgbọ ala. bụ otu.	–	–
EZIOKWU	E nwere modul nke ọdụ ha no. bụ otu na mba. nke onwe ọdụ.	–	–
ERR	Mgbe ngwaike nwere mperi	–	–

Ịwụnye / Wepụ Modul

Ebe a na-akọwa usoro iji tinye modul ọ bụla na ntọala ma ọ bụ wepụ ya.

Ịwụnye modul

1. Wepu mkpuchi ndọtị na ngwaahịa.
2. Pịa ngwaahịa ma jikọọ ya na nkwekọrịta na nko maka ndozi nke akụkụ anọ yana nko maka njikọ.
3. Mgbe njikọ ahụ gasịrị, gbadaa nko For Fixation ma dozie ya kpamkpam.

Na-ewepu modul

1. Wụpụ nko For Disconnection, wee wepụ ngwaahịa ahụ na aka abụọ.

(Ejila ike wepụ ngwaahịa ahụ)

Wiring

Wiring maka nkwukọrịta

1. 10/100BASE-TX's max.extended ogologo n'etiti ọnụ bụ 100m.
2. Modul mgba ọkụ a na-enye Auto Cross Over ọrụ ka onye ọrụ nwee ike iji ma cross na kpọmkwem cable.

Akwụkwọ ikike

• Oge ikike bụ ọnwa 36 site na ụbọchị nrụpụta.
• Onye ọrụ ga-eduzi nchọpụta mbụ nke mmejọ. Agbanyeghị, mgbe a rịọrọ ya, LS ELECTRIC ma ọ bụ ndị nnọchite anya ya nwere ike ịrụ ọrụ a maka ego. Ọ bụrụ na achọpụtara ihe kpatara mmejọ ahụ bụ ọrụ nke LS ELECTRIC, ọrụ a agaghị akwụ ụgwọ.
• Mwepu na akwụkwọ ikike
  1. Ndochi nke ihe oriri na akụkụ ndị nwere oke ndụ (dịka relays, fuses, capacitors, batrị, LCDs, wdg)
  2. Ọdịda ma ọ bụ mmebi nke ọnọdụ ezighi ezi ma ọ bụ njikwa na-abụghị nke akọwapụtara na ntuziaka onye ọrụ
  3. Ọdịda nke ihe mpụga na-enweghị njikọ na ngwaahịa ahụ kpatara
  4. Ọdịda nke mgbanwe kpatara na-enweghị nkwenye LS ELECTRIC
  5. Iji ngwaahịa ahụ n'ụzọ ndị a na-atụghị anya ya
  6. Ọdịda nke enweghị ike ibu amụma / dozie site na teknụzụ sayensị dị ugbu a n'oge nrụpụta
  7. Ọdịda n'ihi ihe ndị dị na mpụga dị ka ọkụ, ihe na-adịghị mma voltage, ma ọ bụ ọdachi ndị na-emere onwe ha
  8. Okwu ndị ọzọ nke LS ELECTRIC na-abụghị maka ya
• Maka ozi akwụkwọ ikike zuru ezu, biko rụtụ aka na ntuziaka onye ọrụ.
• Ọdịnaya nke ntuziaka nrụnye ga-agbanwe agbanwe na-enweghị ọkwa maka nkwalite arụmọrụ ngwaahịa.

Ụlọ ọrụ LS ELECTRIC Co., Ltd

• www.ls-electric.com
• 10310001140 V4.6 (2024.6)
• Email: automation@ls-electric.com
• Isi ụlọ ọrụ/Seoul Office Tel: 82-2-2034-4033,4888,4703
• Ụlọ ọrụ LS ELECTRIC Shanghai (China) Tel: 86-21-5237-9977
• LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) Tel: 86-510-6851-6666
• LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) Tel: 84-93-631-4099
• LS ELECTRIC Middle East FZE (Dubai, UAE) Tel: 971-4-886-5360
• LS ELECTRIC Europe BV (Hoofddorf, Netherlands) Tel: 31-20-654-1424
• LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan) Tel: 81-3-6268-8241
• LS ELECTRIC America Inc. (Chicago, USA) Tel: 1-800-891-2941
• Ụlọ ọrụ: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnamdo, 31226, Korea

Koodu QR

Akwụkwọ / akụrụngwa

LS ELECTRIC XBL-EIMT Njikwa Logic Programmable [pdf] Ntuziaka onye ọrụ XBL-EIMT, EIMH, EIMF, XBL-EIMT Onye njikwa mgbagha mmemme, XBL-EIMT, njikwa mgbagha mmemme, njikwa mgbagha, onye njikwa

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ