LEDYi Lighting PR RGB2 3x10A 3v1 RGB/CCT/Dimming 3 Channel LED RF Controller
Nomoro ea Mohlala: PR RGB2 3x10A 3v1
Likanale tse 3/10A ka kanale ka 'ngoe/ Ho fifala ho sa feteng letho/ Taolo e hole e se nang mohala/Ho fetisa ka boiketsetso/Ho amahanya
Likaroloana
- Bapisa le RF 2.4G sebaka se le seng kapa 'mala o le mong oa libaka tse ngata,' mala o kopane, le taolo e hole ea RGB/RGBW.
- Taolo e le 'ngoe ea RF e amohela li-remote control tse fihlang ho 10.
- Maemo a 4096 0-100% a fifala ka thelelo ntle le khanya ea letho.
- Ha o sebelisa leseli la RGB, mekhoa e matla e hahelletsoeng ka har'a 10, e kenyelletsa ho tlola kapa setaele sa phetoho butle.
- Ts'ebetso ea ho fetisa ka boits'oaro: Molaoli o fetisetsa lets'oao ho molaoli e mong ka bohole ba taolo ea 15m.
- Amahanya ho balaoli ba bangata.
Tekheniki Parameters
| Kenyeletso le Sephetho | |
| Keletso voltage | 12-36VDC |
| Kenya hona joale | 30.5A |
| Sephetho voltage | 3 x (12-36)VDC |
| Sephetho sa hajoale | 3CH,10A/CH |
| Matla a hlahisang | 360-1080W(12-36V) |
| Mofuta oa tlhahiso | Kamehla voltage |
| Tikoloho | |
| Mocheso oa ts'ebetso | Ta: -30 OC ~ +55 OC |
| Thempereichara ea boholo (Boholo.) | T c: +85OC |
| Lintlha tsa IP | IP20 |
| Tiisetso le Tshireletso | |
| Tiisetso | 2 lilemo |
| Tshireletso | Khutlela Polarity |
Ho fokotsa data
| Lets'oao la ho kenya
Bohole ba ho laola |
RF 2.4GHz
15m(Sebaka se senang mekoallo) |
| Sekala se boputsoa se fifalang | 4096 (2^12) maemo |
| Lebala la dimming | 0 -100% |
| Lekhalo le nyenyefatsang | Logarithmic |
| Maqhubu a PWM | 750Hz (ka ho sa feleng) |
| Tšireletseho le EMC | |
| EMC e tloaelehileng (EMC) | EN301 489, EN 62479 |
| Tekanyetso ea polokeho(LVD) | EN60950 |
| Thepa ea Radio(RED) | EA-300-TZ |
| Setifikeiti | CE, EMC, LVD, RED |
| Boima ba 'mele | |
| Boima bo kahare | 0.240kg |
| Boima bo felletseng | 0.259kg |
Mechanical Structures le Installations
Setšoantšo sa Wiring
Match Remote Control (mekhoa e 'meli ea papali)
Mosebelisi oa ho qetela a ka khetha mekhoa e loketseng ea papali / hlakola. Ho na le likhetho tse peli bakeng sa khetho:
Sebelisa konopo ea Match ea molaoli
Papali:
Tobetsa konopo ea ho bapisa hang-hang, 'me hang-hang tobetsa konopo ea ho tima/ho tima (remoutu ea zone e le 'ngoe) kapa konopo ea zone (remoutu ea libaka tse ngata) ea remote. Letšoao la LED le khanyang ka makhetlo a 'maloa le bolela hore papali e atlehile.
Hlakola:
Tobetsa 'me u tšoare konopo ea papali bakeng sa li-5s ho hlakola li-atch tsohle, Letšoao la LED le bonesa ka potlako makhetlo a 'maloa le bolela hore liremote tsohle tse tsamaellanang li hlakotsoe.
Sebelisa Power Restart
Papali:
Tima motlakase, ebe o kenya motlakase hape, 'me hang-hang o tobetse konopo ea ho tima/ho tima (remoutu ea zone e le' ngoe) kapa konopo ea zone (multiple zone remote) makhetlo a 3 ho remoutu. Leseli le panya ka makhetlo a 3 ho bolela hore papali e atlehile.
Hlakola:
Tima motlakase, ebe o kenya motlakase hape, 'me hang-hang o tobetse konopo ea ho tima/ho tima (remoutu ea zone e le' ngoe) kapa konopo ea zone (multiple zone remote) makhetlo a 5 ho remoutu. Leseli le panya ka makhetlo a 5 ho bolela hore li-remote tsohle tse tšoanang li hlakotsoe.
Lenane la mofuta oa RGB Dynamic
Taolo ea mebala e 'meli
- CH1=LED e tšoeu e futhumetseng
- CH2=LED e tšoeu e pholileng
Seteishene se seng le se seng se ka fana ka ho fihla ho 240W(@24V) mme tekano e tšoeu e ka laoloa joalo:
| Mocheso oa 'mala | Bosoeu bo pholileng | Bosoeu bo sa nke lehlakore | Bosoeu bo futhumetseng |
| Kabo ea matla | CH1=0W,CH2=240W | CH1=120W,CH2=120W | CH1=240W,CH2=0W |
Tlhahlobo e sa sebetseng le ho rarolla mathata
| Ho se sebetse hantle | Lisosa | Ho batle phoso |
|
Ha ho khanya |
1. Ha ho matla.
2. Khokahano e fosahetseng kapa e sa sireletsehang. |
1. Hlahloba matla.
2. Sheba khokahano. |
| Mmala o fosahetseng | 1. Khokahano e fosahetseng ea lithapo tsa R/G/B. | 1. Hokela hape lithapo tsa R/G/B. |
| Ho se leka-lekane pakeng tsa ka pele le ka morao, ka voltaglerotholi | 1. Mohala o tsoang ho o molelele haholo.
2. Wire bophara e nyenyane haholo. 3. Tlala e fetang matla a phepelo ea motlakase. 4. Moroalo o fetang matla a taolo. |
1. Fokotsa phepelo ea cable kapa loop.
2. Fetola terata e pharaletseng. 3. Kenya sebaka sa phepelo e phahameng ea matla. 4. Eketsa motlakase oa matla. |
| Ha ho karabo ho tsoa ho remote | 1. Betri ha e na matla.
2. Ho feta bohole bo laolehang. 3. Taolo ha e amane le remote. |
1. Tlosa betri.
2. Fokotsa sebaka se hole. 3. Bapisa remote hape. |
Litokomane / Lisebelisoa
 |
LEDYi Lighting PR RGB2 3x10A 3v1 RGB/CCT/Dimming 3 Channel LED RF Controller [pdf] Buka ea Mong'a PR RGB2 3x10A 3v1 RGB CCT Dimming 3 Channel LED RF Controller, PR RGB2 3x10A 3v1, RGB CCT Dimming 3 Channel LED RF Controller, CCT Dimming 3 Channel LED RF Controller, Dimming 3 Channel LED RF Controller, 3 Channel LED RF Controller Molaoli, RF Controller, Controller |
