Owner's Manual for LEDYi Lighting models including: PR RGB2 3x10A 3v1 RGB CCT Dimming 3 Channel LED RF Controller, PR RGB2 3x10A 3v1, RGB CCT Dimming 3 Channel LED RF Controller, CCT Dimming 3 Channel LED RF Controller, Dimming 3 Channel LED RF Controller, 3 Channel LED RF Controller, LED RF Controller, RF Controller, Controller
RGB/CCT/Dimming 3 Channel LED RF Controller Model No.: PR RGB2 3x10A 3v1 3 Channels/10A per channel/Step-less dimming/Wireless remote control/Auto-transmitting/Synchronize LVD RED Features Match with RF 2.4G single zone or multiple zone single color, dual color and RGB/RGBW remote control. One RF controller accept up to 10 remote control. 4096 levels 0-100% dimming smoothly without any flash. When using with RGB light, built in 10 dynamic mode, include jump or gradual change style. Auto-transmitting function: Controller automatically transmit signal to another controller with 15m control distance. Synchronize on multiple number of controllers. Technical Parameters Input and Output Input voltage Input current Output voltage Output current Output power Output type 12-36VDC 30.5A 3 x (12-36)VDC 3CH,10A/CH 360-1080W(12-36V) Constant voltage Environment Operation temperature Case temperature (Max.) IP rating Ta: -30 OC ~ +55 OC T c: +85OC IP20 Dimming data Input signal Control distance Dimming gray scale Dimming range Dimming curve PWM Frequency Safety and EMC EMC standard (EMC) Safety standard(LVD) Radio Equipment(RED) Certification RF 2.4GHz 15m(Barrier-free space) 4096 (2^12) levels 0 -100% Logarithmic 750Hz (default) EN301 489,EN 62479 EN60950 EN300 328 CE,EMC,LVD,RED Warranty and Protection Warranty 2 years Protection Reverse Polarity Weight Net weight Gross weight 0.240kg 0.259kg User Manual Ver 1.0.7 75.00 mm + RGB/CCT/Dimming 3 Channel LED RF Controller Mechanical Structures and Installations LED indicator Match key Installation rack Power input Power input + LED output + LED output red LED output green - LED output blue - 75.00 mm 107.00 mm 24.50 mm Wiring Diagram for RGB Power Supply 12-36VDC Constant Voltage AC100-240V RGB remote for dual color CCT remote for single color Dimming remote RGB LED strip Power Supply 12-36VDC Constant Voltage AC100-240V CW WW Dual color LED strip Power Supply 12-36VDC Constant Voltage AC100-240V + Single color LED strip + Single color LED strip + Single color LED strip Page 1 Match Remote Control (two match ways) End user can choose the suitable match/delete ways. Two options are offered for selection: Use the controller's Match key Use Power Restart Match: Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote. The LED indicator fast flash a few times means match is successful. Delete: Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted. RGB Dynamic mode list 1: RGB jump Match: Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful. Delete: .Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted. 6: RGB fade in and out 2: RGB smooth 3: 6 color jump 7: Red fade in and out 8: Green fade in and out 4: 6 color smooth 9: Blue fade in and out 5: Yellow cyan purple smooth 10: White fade in and out RGB/CCT/Dimming 3 Channel LED RF Controller Dual color control CH1=Warm white LED CH2=Cool white LED Each channel can supply up to 240W(@24V) and white balance can be controlled as such: Color temperature Power distribution Cool white CH1=0W,CH2=240W Neutral white CH1=120W,CH2=120W Warm white CH1=240W,CH2=0W Linear dual color tuning Warm white(Min. 2700K) Neutral white(4000K) Cool white(Max. 6500K) Recommended CCT range PPW WMM dduuttyy((%%)) PWM duty(%) Dimming curve for CCT 110000 9900 8800 7700 6600 5500 4400 3300 2200 1100 Gamma=1.0 10 20 30 40 50 60 70 80 90 100 Brightness(%) Dimming curve for RGB/DIM 100 Gamma=1.6 90 80 70 60 50 40 30 20 10 10 20 30 40 50 60 70 80 90 100 Brightness(%) Malfunctions analysis & troubleshooting Malfunctions No light Wrong color Uneven intensity between front and rear,with voltage drop No response from the remote Causes 1. No power. 2. Wrong connection or insecure. 1. Wrong connection of R/G/B wires. 1. Output cable is too long. 2. Wire diameter is too small. 3. Overload beyond power supply capability. 4. Overload beyond controller capability. 1. The battery has no power. 2. Beyond controllable distance. 3. The controller did not match the remote. Troubleshooting 1. Check the power. 2. Check the connection. 1. Reconnect R/G/B wires. 1. Reduce cable or loop supply. 2. Change wider wire. 3. Replace higher power supply. 4. Add power repeater. 1. Replace battery. 2. Reduce remote distance. 3. Re-match the remote. User Manual Ver 1.0.7 Page 2Corel PDF Engine Version 16.1.0.843