LEDlife V1 Mobala o le Mong oa LED Contr
Tlhahisoleseding ya Sehlahiswa
| Mohlala No. | V1 |
|---|---|
| Likaroloana | Molaoli oa LED oa Mobala o le Mong, 1 Channel / Mohato o fokolang dimming/ Taolo ya remoutu e se nang waelese/Auto-transmitting/Synchronize/Push Dim/ Tshireletso e ngatanyana |
| Tekheniki Parameters | Keletso voltage: 5-36VDC Kenyelletso ea hajoale: 8.5A Sephetho voltage: 5-36VDC Nako ea tlhahiso: 1CH,8A Output power: 40W/96W/192W/288W (5V/12V/24V/36V) Mofuta oa tlhahiso: Constant voltage |
| Tšireletseho le EMC | Tekanyetso ea EMC (EMC): ETSI EN 301 489-1 V2.2.3 Tekanyetso ea polokeho (LVD): ETSI EN 301 489-17 V3.2.4 Setifikeiti sa Thepa ea Radio (RED): EN 62368-1:2020+A11:2020 EMC, LVD, RED: ETSI EN 300 328 V2.2.2, CE |
| Boima ba 'mele | Boima ba 'mele: 0.041kg Boima ba 'mele: 0.052kg |
| Ho fokotsa data | Letšoao la ho kenya: RF 2.4GHz + Push Dim Sebaka sa taolo: 30m (Sebaka se se nang mekoallo) Boemo bo boputsoa bo nyenyefatsang: maemo a 4096 (2^12). Lebelo le fokolang: 0 - 100% Lekhalo le nyenyefatsang: Logarithmic PWM khafetsa: 2000Hz (kamehla) |
| Tikoloho | Mocheso oa tšebetso: -30°C ~ +55°C Mocheso oa mocheso (Boholo): +85°C Boemo ba IP: IP20 |
| Tiisetso le Tshireletso | Warranty: lilemo tse 5 Tšireletso: Reverse polarity, Over-heat, Over-load, Short potoloho |
Litaelo tsa Tšebeliso ea Sehlahisoa
Mechanical Structures le Installations
Letšoao la LED, Push switch com, Push switch in, Reke ea ho kenya, Senotlolo sa papali, tlhahiso ea LED, Kenyelletso ea matla
Setšoantšo sa Wiring
Match Remote Control (mekhoa e 'meli ea papali)
Khetho ea 1: Sebelisa konopo ea Match ea molaoli
- Tobetsa konopo ea ho bapisa selaoli hakgutshwane.
- Hang-hang tobetsa konopo ea ho tima/ho tima (bakeng sa remoutu ea zone e le 'ngoe) kapa konopo ea zone (bakeng sa remoutu ea libaka tse ngata) ho remoutu.
- Haeba letšoao la LED le bonesa ka makhetlo a 'maloa, ho bolela hore papali e atlehile.
Khetho ea 2: Sebelisa Matla a ho Qala bocha
- Tima matla a moamoheli, ebe o bulela motlakase.
- Pheta mohato ona.
- Hang-hang tobetsa konopo ea ho tima/ho tima (bakeng sa remoutu ea zone e le 'ngoe) kapa konopo ea zone (bakeng sa remoutu ea libaka tse ngata) makhetlo a 3 ho remoutu.
- Haeba leseli le panya ka makhetlo a 3, ho bolela hore papali e atlehile.
Hlakola li-Remotes tse tšoanang
- Tima matla a moamoheli, ebe o bulela motlakase.
- Pheta mohato ona.
- Hang-hang tobetsa konopo ea ho tima/ho tima (bakeng sa remoutu ea zone e le 'ngoe) kapa konopo ea zone (bakeng sa remoutu ea libaka tse ngata) makhetlo a 5 ho remoutu.
- Haeba lebone le panya ka makhetlo a 5, ho bolela hore li-remoutu tsohle tse tsamaellanang li hlakotsoe.
Lintlha tsa kopo
Baamoheli bohle ba sebakeng se le seng
Sebaka sa taolo ea hole ea RF: 30m
Moamoheli e mong le e mong (a le mong kapa ho feta) sebakeng se fapaneng, joalo ka sebaka sa 1, 2, 3 kapa 4
Sebaka sa taolo ea hole ea RF: 30m bakeng sa sebaka ka seng
Mosebetsi oa Push Dim
Sebopeho se fanoeng sa Push-Dim se lumella mokhoa o bonolo oa ho fifala o sebelisa li-switches tsa lebota tse fumanehang khoebong tse sa keneng (nakoana).
- Tobetsa nako e kgutshwane: Ho bulela kapa tima lebone.
- Tobetsa nako e telele (1-6s): Tobetsa 'me u hatelle ho fifatsa ho fokolang. Le Bakeng sa khatiso e 'ngoe le e' ngoe e telele, boemo ba khanya bo ea ka lehlakoreng le fapaneng.
- Dimming memory: Lesedi le kgutlela boemong bo fetileng ba dimming ha le tingwa mme le butswe hape, le kamora hore motlakase o hlolehe.
- Kamahanyo: Haeba balaoli ba fetang bonngoe ba hoketsoe sesebelisoa se le seng sa push, tobetsa nako e telele ho feta 10s ho hokahanya sistimi. Mabone ohle sehlopheng a tla fifala ho fihlela ho 100%. Ha ho hlokahale terata efe kapa efe e eketsehileng ea synchrony lits'ebetsong tse kholoanyane. Re khothaletsa ho se fete likotoana tse 25 tsa balaoli tse hokahantsoeng le switch switch, mme bolelele bo boholo ba lithapo ho tloha ho push ho ea ho molaoli ha boa lokela ho feta 20 metres.
Molaoli oa LED oa Mobala o le Mong
Seteishene/mohato o sa fokotseng ho fifala/taolo e se nang mohala e se nang mohala/Auto-transmitting/Synchronize/Push Dim/Tshireletso e mengata
Likaroloana
- Maemo a 4096 0-100% a fifala ka thelelo ntle le khanya ea letho.
- Bapisa le sebaka se le seng sa RF 2.4G kapa taolo e hole ea dimming ea libaka tse ngata.
- Taolo e le 'ngoe ea RF e amohela li-remote control tse fihlang ho 10.
- Ts'ebetso ea ho fetisa ka boits'oaro: Molaoli o fetisetsa lets'oao ho molaoli e mong ka bohole ba taolo ea 30m.
- Amahanya ho balaoli ba bangata.
- Hokahana le sesebelisoa sa ho sutumetsa kantle ho fihlela ts'ebetso ea ho tima / ho tima le 0-100% ts'ebetso ea dimming.
- Ho khantša/ho tima nako ea ho fifala 3s e ka khethoa.
- Mocheso o fetelletseng / boima bo feteletseng / Ts'ireletso ea potoloho e khuts'oane, hlaphoheloa ka bohona
Tekheniki Parameters
| Kenyeletso le Sephetho | |
| Keletso voltage | 5-36VDC |
| Kenya hona joale | 8.5A |
| Sephetho voltage | 5-36VDC |
| Sephetho sa hajoale | 1CH,8A |
|
Matla a hlahisang |
40W/96W/192W/288W (5V/12V/24V/36V) |
| Mofuta oa tlhahiso | Kamehla voltage |
| Tšireletseho le EMC | |
| EMC e tloaelehileng (EMC) | ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4 |
| Tekanyetso ea polokeho(LVD) | EN 62368-1:2020+A11:2020 |
| Thepa ea Radio(RED) | ETSI EN 300 328 V2.2.2 |
| Setifikeiti | CE, EMC, LVD, RED |
| Boima ba 'mele | |
| Boima bo kahare | 0.041 lik'hilograma |
| Boima bo felletseng | 0.052kg |
| Ho fokotsa data | |
| Lets'oao la ho kenya | RF 2.4GHz + Push Dim |
| Bohole ba ho laola | 30m(Sebaka se senang mekoallo) |
| Sekala se boputsoa se fifalang | 4096 (2^12) maemo |
| Lebala la dimming | 0 -100% |
| Lekhalo le nyenyefatsang | Logarithmic |
| Khafetsa PWM | 2000Hz (ka ho sa feleng) |
| Tikoloho | |
| Mocheso oa ts'ebetso | Ta: -30 OC ~ +55 OC |
| Thempereichara ea boholo (Boholo.) | T c: +85OC |
| Lintlha tsa IP | IP20 |
| Tiisetso le Tshireletso | |
| Tiisetso | 5 lilemo |
|
Tshireletso |
Khutlisa polarity
Mocheso o Felletseng ka Mojaro Potoloho e khuts'oane |
Mechanical Structures le Installations
Setšoantšo sa Wiring
Match Remote Control (mekhoa e 'meli ea papali)
Mosebelisi oa ho qetela a ka khetha mekhoa e loketseng ea papali / hlakola. Likhetho tse peli li fanoa bakeng sa khetho
Sebelisa konopo ea Match ea molaoli
Kopanya
- Tobetsa konopo ea ho bapisa hang-hang, 'me hang-hang tobetsa konopo ea ho tima/ho tima (remoutu ea zone e le 'ngoe) kapa konopo ea zone (remoutu ea libaka tse ngata) ho remoutu.
- Letšoao la LED le khanya ka potlako makhetlo a 'maloa le bolela hore papali e atlehile.
Hlakola
Tobetsa 'me u tšoare konopo ea papali bakeng sa 5s ho hlakola li-atch kaofela, Letšoao la LED le bonesa ka potlako makhetlo a 'maloa ho bolela hore liremote tsohle tse tsamaellanang li hlakotsoe.
Sebelisa Power Restart
Kopanya
Tima matla a moamoheli, ebe o bulela motlakase.
Pheta hape
Hang-hang tobetsa konopo ea ho tima/ho tima (remoutu ea zone e le 'ngoe) kapa konopo ea zone (remoutu ea libaka tse ngata) makhetlo a 3 ho remoutu. Leseli le panya ka makhetlo a 3 ho bolela hore papali e atlehile.
Hlakola
Tima matla a moamoheli, ebe o bulela motlakase.
Pheta hape
Tobetsa hang hang konopo ea ho tima/ho tima (remoutu ea zone e le 'ngoe) kapa konopo ea zone (remoutu ea libaka tse ngata) makhetlo a 5 ho remoutu. Leseli le panya ka makhetlo a 5 ho bolela hore li-remote tsohle tse tšoanang li hlakotsoe.
lengolo la kopo
- . Baamoheli bohle ba sebakeng se le seng
Phetisetso e iketsang: Moamoheli a le mong a ka fetisetsa matšoao ho tloha hole ho ea ho moamoheli e mong ka har'a 30m, Ha feela ho na le moamoheli ka har'a 30m, sebaka sa taolo ea hole se ka atolosoa.
Khokahano ea boiketsetso: Batho ba bangata ba amohelang sebaka sa 30m ba ka sebetsa ka mokhoa o lumellanang ha ba laoloa ke sebaka se le seng. Ho beha moamoheli ho ka fana ka sebaka sa puisano sa 30m. Litšepe le lisebelisoa tse ling tsa tšepe li tla fokotsa mefuta. Mehloli e matla ea mats'oao e joalo ka lirutha tsa WiFi le lionto tsa microwave li tla ama sebaka. Re khothaletsa bakeng sa lits'ebetso tsa kahare hore ho beoa ha moamoheli ha hoa lokela ho arohana ho feta 15m Moamoheli e mong le e mong (a le mong kapa ho feta) sebakeng se fapaneng, joalo ka zone 1, 2, 3 kapa 4.
Mosebetsi oa Push Dim
Sebopeho se fanoeng sa Push-Dim se lumella mokhoa o bonolo oa ho fifala o sebelisa li-switches tsa lebota tse fumanehang khoebong tse sa thekeseleng (ea nakoana).
- Tobetsa e khutšoanyane
Ho bulela kapa tima lebone. - Tobetsa nako e telele (1-6s)
Tobetsa 'me u hatelle ho fifatsa ho fokolang Ka nako e 'ngoe le e 'ngoe ha u tobetsa nako e telele, boemo ba khanya bo leba nqa e 'ngoe. - Dimming memory: Lesedi le kgutlela boemong bo fetileng ba dimming ha le timilwe mme le butswe hape, leha motlakase o tjhaile.
- Kamahanyo: Haeba balaoli ba fetang a le mong ba hokahane le sesebelisoa se le seng sa push, etsa mochini o molelele ho feta 10, ebe sistimi e hokahanngoa mme mabone ohle sehlopheng a fifala ho fihlela 100%.
- Sena se bolela hore ha ho hlokahale terata efe kapa efe e eketsehileng ea synchrony lits'ebetsong tse kholoanyane.
- Re khothaletsa palo ea balaoli ba hokahaneng le switch switch ha e fete likotoana tse 25,
- Bolelele ba lithapo ho tloha ho push to controller ha boa lokela ho feta 20 metres.
Curve e boreleli
Ho khantša/ho tima nako ea fifala
Tobetsa nako e telele linotlolo tsa 5s, ebe o tobetsa konopo ea papali e khutšoane makhetlo a 3, lebone la ho bulela/ho tima le tla setelloa ho 3s, 'me leseli la pontšo le benya makhetlo a 3. Tobetsa nako e telele linotlolo tsa 10s, khutlisetsa paramethara ea kamehla ea feme, nako ea ho tima / ho tima le eona e khutlisetsa ho 0.5s.
Tlhahlobo e sa sebetseng hantle le ho rarolla mathata
| Ho se sebetse hantle | Lisosa | Ho batle phoso |
| Ha ho khanya | 1. Ha ho matla.
2. Khokahano e fosahetseng kapa e sa sireletsehang. |
1. Hlahloba matla.
2. Sheba khokahano. |
| Ho se leka-lekane pakeng tsa ka pele le ka morao, ka voltaglerotholi | 1. Mohala o tsoang ho o molelele haholo.
2. Wire bophara e nyenyane haholo. 3. Tlala e fetang matla a phepelo ea motlakase. 4. Moroalo o fetang matla a taolo. |
1. Fokotsa phepelo ea cable kapa loop.
2. Fetola terata e pharaletseng. 3. Kenya sebaka sa phepelo e phahameng ea matla. 4. Eketsa motlakase oa matla. |
|
Ha ho karabo ho tsoa ho remote |
1. Betri ha e na matla.
2. Ho feta bohole bo laolehang. 3. Taolo ha e amane le remote. |
1. Tlosa betri.
2. Fokotsa sebaka se hole. 3. Bapisa remote hape. |
Litokomane / Lisebelisoa
 |
LEDlife V1 Molaoli oa LED o le Mong oa Mobala o le Mong [pdf] Tlhophiso Tataiso Molaoli oa LED oa V1 oa Mobala o le Mong, V1, Molaoli oa LED oa Mobala o le Mong, Molaoli oa LED oa Mobala, Molaoli oa LED, Molaoli |
