LEDlife V1 Single Color LED Contr
Zambiri Zamalonda
| Chitsanzo No. | V1 |
|---|---|
| Mawonekedwe | Single Colour LED Controller, 1 Channel/Step-single dimming/Wireless remote control/Auto-transmitting/Synchronize/Push Dim / chitetezo chambiri |
| Technical Parameters | Lowetsani voltagndi: 5-36VDC Zolowetsa panopa: 8.5A Zotsatira voltagndi: 5-36VDC Output current: 1CH,8A Output power: 40W/96W/192W/288W (5V/12V/24V/36V) Mtundu wotulutsa: Constant voltage |
| Chitetezo ndi EMC | EMC muyezo (EMC): ETSI EN 301 489-1 V2.2.3 Muyezo wachitetezo (LVD): ETSI EN 301 489-17 V3.2.4 Chitsimikizo cha Zida za Wailesi (RED): EN 62368-1:2020+A11:2020 EMC, LVD, RED: ETSI EN 300 328 V2.2.2, CE |
| Kulemera | Net Kulemera kwake: 0.041kg Gross Kulemera kwake: 0.052kg |
| Kuchepetsa deta | Input signal: RF 2.4GHz + Push Dim Mtunda wowongolera: 30m (malo opanda chotchinga) Dimming grayscale: 4096 (2^12) levels Kuchuluka: 0-100% Kupindika kocheperako: Logarithmic PWM pafupipafupi: 2000Hz (zosakhazikika) |
| Chilengedwe | Kutentha kwa ntchito: -30°C ~ +55°C Kutentha kwakukulu (Max.): +85°C IP mlingo: IP20 |
| Chitsimikizo ndi Chitetezo | Chitsimikizo: 5 years Chitetezo: Reverse polarity, Kutentha Kwambiri, Kulemetsa Kwambiri, Kufupika dera |
Malangizo Ogwiritsira Ntchito Zogulitsa
Kapangidwe Kamakina ndi Kuyika
LED indicator, Push switch com, Push switch in, Installation rack, Match key, LED output, Power input
Chithunzi cha Wiring
Match Remote Control (njira ziwiri zofananira)
Njira 1: Gwiritsani ntchito kiyi ya Match owongolera
- Dinani mwachidule batani lofananira pa chowongolera.
- Immediately press the on/off key (for single zone remote) or zone key (for multiple zone remote) on the remote.
- If the LED indicator flashes a few times, it means the match is successful.
Njira 2: Gwiritsani Ntchito Kuyambitsanso Mphamvu
- Zimitsani mphamvu ya wolandila, kenako yatsani mphamvuyo.
- Bwerezani sitepe iyi.
- Immediately short press the on/off key (for single zone remote) or zone key (for multiple zone remote) 3 times on the remote.
- Ngati kuwala kukuwalira katatu, zikutanthauza kuti machesi apambana.
Chotsani Zofananira Zakutali
- Zimitsani mphamvu ya wolandila, kenako yatsani mphamvuyo.
- Bwerezani sitepe iyi.
- Immediately short press the on/off key (for single zone remote) or zone key (for multiple zone remote) 5 times on the remote.
- Ngati kuwala kukuwalira ka 5, zikutanthauza kuti zolumikizira zonse zofananira zidachotsedwa.
Zolemba za ntchito
Onse olandira mu zone yomweyo
RF yowongolera kutali: 30m
Wolandira aliyense (mmodzi kapena kuposerapo) m'malo osiyanasiyana, monga zone 1, 2, 3 kapena 4
RF yowongolera kutali: 30m pagawo lililonse
Push Dim Function
Mawonekedwe operekedwa a Push-Dim amalola njira yosavuta yochepetsera pogwiritsa ntchito masiwichi a khoma osakhazikika (akanthawi).
- Kanikizirani mwachidule: Yatsani kapena kuzimitsa nyali.
- Long press (1-6s): Press and hold to step-less dimming. With For every other long press, the light level goes in the opposite direction.
- Dimming memory: Light returns to the previous dimming level when switched off and on again, even after a power failure.
- Synchronization: If more than one controller is connected to the same push switch, do a long press for more than 10s to synchronize the system. All lights in the group will dim up to 100%. There is no need for any additional synchrony wire in larger installations. We recommend not exceeding 25 pieces of controllers connected to a push switch, and the maximum length of the wires from push to controller should be no more than 20 meters.
Single Colour LED Controller
Channel/Step-less dimming/Wireless remote control/Auto-transmitting/Synchronize/Push Dim/Multiple protection
Mawonekedwe
- 4096 milingo 0-100% imathima bwino popanda kung'anima kulikonse.
- Fananizani ndi RF 2.4G zone imodzi kapena zingapo zone dimming remote control.
- Woyang'anira RF m'modzi amavomereza zowongolera zakutali za 10.
- Ntchito yotumizirana ma auto: Wowongolera amatumiza chizindikiro kwa wowongolera wina wokhala ndi mtunda wowongolera wa 30m.
- Gwirizanitsani pa owongolera angapo.
- Lumikizanani ndi chosinthira chakunja kuti mukwaniritse / kuzimitsa ndi 0-100% dimming ntchito.
- Kuyatsa/kuzimitsa nthawi ya 3s yosankhika.
- Kutentha kwambiri / Kachilombo / Chitetezo chozungulira chachifupi, zimachira zokha
Technical Parameters
| Zolowetsa ndi Zotulutsa | |
| Lowetsani voltage | 5-36 VDC |
| Lowetsani panopa | 8.5A |
| Zotsatira voltage | 5-36 VDC |
| Zotulutsa zamakono | 1A |
|
Mphamvu zotulutsa |
40W/96W/192W/288W (5V/12V/24V/36V) |
| Mtundu wotulutsa | Nthawi zonse voltage |
| Chitetezo ndi EMC | |
| EMC muyezo (EMC) | ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4 |
| Muyezo wachitetezo (LVD) | EN 62368-1:2020+A11:2020 |
| Zida zamawayilesi(RED) | ETSI EN 300 328 V2.2.2 |
| Chitsimikizo | CE, EMC, LVD, RED |
| Kulemera | |
| Kalemeredwe kake konse | 0.041kg pa |
| Malemeledwe onse | 0.052kg |
| Kuchepetsa deta | |
| Lowetsani chizindikiro | RF 2.4GHz + Push Dim |
| Kuwongolera mtunda | 30m (malo opanda chotchinga) |
| Dimming grey scale | 4096 (2^12) milingo |
| Dimming range | 0 -100% |
| Phindu la dimming | Logarithmic |
| PWM pafupipafupi | 2000Hz (chofikira) |
| Chilengedwe | |
| Kutentha kwa ntchito | Ta: -30 OC ~ +55 OC |
| Kutentha kwachingwe (Max.) | T c: +85OC |
| Mtengo wa IP | IP20 |
| Chitsimikizo ndi Chitetezo | |
| Chitsimikizo | zaka 5 |
|
Chitetezo |
Sinthani polarity
Kutentha Kwambiri Kuchulukirachulukira Kwafupipafupi |
Kapangidwe Kamakina ndi Kuyika
Chithunzi cha Wiring
Match Remote Control (njira ziwiri zofananira)
The end user can choose the suitable match/delete ways. Two options are offered for selection
Gwiritsani ntchito kiyi ya Match controller
Kufanana
- Dinani pang'ono kiyi yofananira, ndipo nthawi yomweyo dinani batani la on/off (single zone remote) kapena zone key (multiple zone remote) pa remote.
- Chizindikiro cha LED chimawala mwachangu kangapo zikutanthauza kuti machesi akuyenda bwino.
Chotsani
Dinani ndikugwira kiyi ya machesi kwa 5s kuti mufufute machesi onse, Chizindikiro cha LED chimawala mwachangu kangapo zikutanthauza kuti zolumikizira zonse zofananira zidachotsedwa.
Gwiritsani Ntchito Kuyambitsanso Mphamvu
Kufanana
Zimitsani mphamvu ya wolandila, kenako yatsani mphamvuyo.
Repeat again
Nthawi yomweyo dinani batani la on/off (single zone remote) kapena zone key (multiple zone remote) katatu pa remote. Kuwala kukuthwanima katatu kumatanthauza kuti machesi apambana.
Chotsani
Zimitsani mphamvu ya wolandila, kenako yatsani mphamvuyo.
Repeat again
Dinani pang'onopang'ono batani la / off key (remote ya zone imodzi) kapena kiyi ya zone (magawo angapo akutali) kasanu patali. Kuwala kumawalira ka 5 kumatanthauza kuti ma remote onse ofananira adachotsedwa.
cholemba cholemba
- . All the receivers in the same zone
Kutumiza pawokha: One receiver can transmit the signals from the remote to another receiver within 30m, As long as there is a receiver within 30m, the remote control distance can be extended.
Kulunzanitsa mokha: Multiple receivers within a 30m distance can work synchronously when they are controlled by the same remote. Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that receiver placements should be no further apart than15m Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4
Push Dim Function
The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches
- Kusindikiza mwachidule
Yatsani kapena kuzimitsa nyali. - Kusindikiza kwautali (1-6s)
Press and hold to step-less dimming With every other long press, the light level goes in the opposite direction. - Dimming memory: Kuwala kumabwereranso ku dimming ya m'mbuyomo kukazimitsidwa ndi kuyatsidwanso, ngakhale mphamvu ikatha.
- Synchronization: If more than one controller is connected to the same push switch, do a long press for more than 10, then the system is synchronized and all lights in the group dim up to 100%.
- Izi zikutanthauza kuti palibe chifukwa cha waya wowonjezera wa synchrony m'makhazikitsidwe akuluakulu.
- Tikukulimbikitsani kuti chiwerengero cha olamulira olumikizidwa ndi chosinthira sichidutsa zidutswa 25,
- Kutalika kwa mawaya kuchokera ku kukankhira kupita ku controller sayenera kupitirira 20 metres.
Kuzungulira Kukhota
Kuwala / kuzimitsa nthawi kuzirala
Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, and the indicator light blink 3 times. Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s.
Kusanthula Zowonongeka & Kuthetsa Mavuto
| Zolakwika | Zoyambitsa | Kusaka zolakwika |
| Palibe kuwala | 1. Palibe mphamvu.
2. Kulumikizana kolakwika kapena kusatetezeka. |
1. Yang'anani mphamvu.
2. Onani kugwirizana. |
| Kusiyanasiyana kwamphamvu pakati pa kutsogolo ndi kumbuyo, ndi voltage dontho | 1. Chingwe chotulutsa ndichotalika kwambiri.
2. Waya awiriwa ndi ochepa kwambiri. 3. Kudzaza kupitirira mphamvu zamagetsi. 4. Kuchulukirachulukira kupitilira mphamvu yowongolera. |
1. Chepetsani chingwe kapena malupu.
2. Sinthani waya wokulirapo. 3. Bwezerani magetsi apamwamba. 4. Onjezani mphamvu yobwerezabwereza. |
|
Palibe yankho kuchokera patali |
1. Batire ilibe mphamvu.
2. Kupitilira mtunda wowongolera. 3. Chowongolera sichinafanane ndi remote. |
1. Bwezerani batire.
2. Chepetsani mtunda wakutali. 3. Fananizaninso remote. |
Zolemba / Zothandizira
 |
LEDlife V1 Single Colour LED Controller [pdf] Kukhazikitsa Guide V1 Single Color LED Controller, V1, Single Color LED Controller, Color LED Controller, LED Controller, Controller |
