LITLHAKISO TSA LAUPER JCC Tlhahlobo ea Khase
2019 by JcT Analysentechnik Gmbh Ho thijoa ka botlalo kapa karolo ea karolo ea mofuta ofe kapa ofe ntle le tumello e ngotsoeng e thibetsoe Matšoao ohle a sa boleloang ka ho hlaka ke thepa ea beng ba ona ka molao. JcT e fana ka bukana ea ts'ebetso "joalokaha e le" ntle le tiisetso ea mofuta ofe kapa ofe, e ka ba e boletsoeng kapa e ka hlalosoang, ho kenyeletsoa litiisetso kapa maemo a thekiso kapa ho sebetsa hantle molemong o itseng. Ho ipapisitsoe le liphetoho tsa tekheniki ntle le tsebiso
Selelekela
Series Jcc gas conditioners li etselitsoe ho fana ka pre-conditioned sample likhase ho lisebelisoa tsa tlhahlobo ea khase e khonang ho mamella mongobo. Lisebelisoa tsohle tse hlokahalang ho fana ka dehumidification ea metsi sample khase 'me u tlose condensate e loketse ho sebelisoa le ho kenngoa ntlong e le' ngoe. Ba netefatsa boemo bo tšepahalang ba likhase ho ntlafatsa sephetho sa tlhahlobo. Hobane mouoane oa metsi o hatelloa, li-analyzer li ka sebelisoa ts'ebetsong e tsoelang pele ha tlhokomelo e le tlase.
Likhetho tsa bolulo
Ho fihlela litlhoko tsohle tsa letoto la Jcc li fumaneha ho
4 mefuta e fapaneng ea bolulo:
- 19 "Rackmount
- Ho hlongoa ka marako bakeng sa ho hlongoa ka bolelele
- Wall mount housing for crosswise mounting
- E nkehang
Tšebeliso e fapaneng
Jcc sampli-unit tsa boemo ba khase li fumaneha e le mochini o futhumatsang o le mong kapa o habeli le palo e nepahetseng ea lipompo tsa condensate. Likhetho li kenyelletsa samplipompo, li-filters, li-monitor tsa condensate, le tlhahlobo ea phallo le taolo, ho aha likarolo tse felletseng tsa boemo ba khase. Ha ho e-na le mochine o kopanetsoeng oa mocheso o le mong, lihlahisoa tsa mocheso li kopantsoe ka letoto. Sena se eketsa katleho ea ho pholisa le ho lumella mocheso o phahameng oa tikoloho.
Boitsebiso bo akaretsang ba polokeho
SampLi-conditioner tsa khase ke lisebelisoa tse tsoetseng pele tse reretsoeng ho sebelisoa ke basebetsi ba tšoanelehang feela. Hoa hlokahala hore bukana ena e baloe le ho utloisisoa ke ba tlang ho kenya, ho sebelisa le ho hlokomela thepa ena. Ts'ebetso ea sample gas cooler e tlameha ho etsoa hape ho latela melaoana e sebetsang ea ts'ireletso le melao ea thibelo ea likotsi.
Ho se hlokomeloe ho ka baka kotsi kapa tšenyo ea lintho tse bonahalang. JcT ha e nke boikarabello bakeng sa ho se latele likeletso, melao le melao ea ts'ireletso tse boletsoeng bukeng ena. Sena se kenyelletsa ho kenya, ts'ebetso, tlhokomelo le ts'ebeletso le haeba e sa ngoloa bukeng ena.
JcT Analysentechnik Gmbh ha e ikarabelle bakeng sa liphetoho tse sa reroang ho sesebelisoa kapa ts'ebetso kapa ts'ebeliso e sa lokelang. Haeba ts'ebetso e se nang kotsi ea module e sa khonehe, mosebelisi o tlameha ho emisa ts'ebetso mme a thibele ts'ebeliso e eketsehileng
Mabaka a ho beha mojule mosebetsing ke:
- Yuniti e bonahala e senyehile
- haeba thepa e sa sebetse
- polokelo e fosahetseng tlasa maemo a sa lokelang
- haeba sesebediswa se ntse se tsamaya kgafetsa
Mabaka a ho beha mojule mosebetsing ke:
- Yuniti • e bonahala e senyehile
- haeba thepa e sa sebetse
- polokelo e fosahetseng tlasa maemo a sa lokelang
- haeba sesebediswa se ntse se tsamaya kgafetsa
Litaelo tse khethehileng
Likarolo tsa sampyuniti ea boemo ba khase e etselitsoe ho sebelisoa lits'ebetsong tsa tlhahlobo ea khase feela. Ka kopo hlokomela lintlha tsa tekheniki mabapi le sepheo sa ts'ebetso, motsoako oa thepa le likhatello tse amohelehang le meeli ea mocheso. Sehlopha ha sea lokela ho sebetsa libakeng tse kotsi. Lits'ebetso tsohle tse ho sampyuniti ea boemo ba khase e tlameha ho etsoa ho latela melaoana e sebetsang ea ts'ireletso, melao ea thibelo ea likotsi le litaelo tse ling tsohle tse ka nahanoang. Ho feta moo, melaoana ea ts'ebeliso ea FkW / hFkW (Bulletin Zh1/409) le ea ho lahla condensate (Federal Water Act) e tlameha ho hlokomeloa.
TLHOKOMELO!
Koala sample phallo ea khase pele o tlosa likhokahano tsa khase kapa likarolo tsa karohano tsa condensate.
TLHOKOMELO!
condensate e kanna ea ba le lintho tse kotsi kapa tse senyang! Apara liaparo tse loketseng tsa tšireletso!
Ho kenella ts'ebetsong ea ts'ireletso le lisebelisoa tsa ts'ireletso le liphaepheng tse etellang pele tsa sehatsetsing le mochini oa mocheso oa khase ha oa lumelloa. Ho qhekella ha selikalikoe sa lihatsetsi ho lumelloa feela ke JcT Analysentechnik kapa basebetsi ba eletsoang le ho lumelloa ke JcT.
Lipalangoang le polokelo
TLHOKOMELO!
Pele o tsamaisa kapa o boloka sample khase e pholileng, tlosa mochine oa mocheso oa khase 'me u e romelle ka thepa ea ho paka e rometsoeng. Lipalangoang tsa sampyuniti ea boemo ba khase e sebakeng sa ho sebetsa feela! Sheba matšoao a hatisitsoeng sephutheloaneng sa lipalangoang! Lithempereichara tsa lipalangoang le tsa polokelo li se ke tsa feta
-25°c ho ea ho +63°c. ka hona, mongobo oa tikoloho ha oa lokela ho feta 90%.
TLHOKOMELO!
Kamora ho tsamaisa kapa ho kenya, emela bonyane lihora tsa 2 ho fihlela ts'ebetso e qala! Beha sampyuniti ya boemo ba kgase sebakeng se bataletseng kapa o e hlome ka ho otloloha.
Mefuta ea JCC
HLOKOMELA
Metsoako e meng e ka bang teng ea likhetho ha e na thuso ka botekgeniki, ka hona ha e fumanehe. Ka kopo, ikopanye le sehlopha sa barekisi ba JcT pele u etsa odara.
Lintlha tsa tekheniki
| Mocheso oa mocheso | Mono | Tse peli |
| Palo ea litsela tsa khase | 1 | 1 |
| Phoka ea ntlha ea phoka | +3°c | |
| Tshebetso | ||
| Sekhahla sa phallo | max. 250 l/h | 125 l/h |
| Mocheso oa mocheso oa khase | max. +140°c | |
| Kotsi ea phoka | max. +70°c | |
| Mocheso oa tikoloho | +5… +45 °c | |
| Khatello ea ho sebetsa | 0,5 … 2,2 bar abs. | |
| Bophahamo ba lefu | 67 ml | 110 ml |
| E loketse ho sebetsa | <15 mets | |
| Khatello e theoha ka bongata. sekhahla sa phallo | 20 bar | 9 bar |
| Lintlha tsa litšupiso tsa phoka | ||
| Sekhahla sa phallo | 100 l/h | |
| Mocheso oa tikoloho | +25°c | |
| Ho tsitsa ha phoka | ±0,3 k | |
| Motlakase | |
| Phepelo voltage | 230 VAc 50/60 hz kapa 115 VAc 50/60 hz |
| Tšebeliso ea matla (ho itšetlehile ka mojaro, mocheso o teng le tlhophiso) |
hoo e ka bang. 300 VA |
|
Khokahano ea phepelo |
hoo e ka bang. 2m bula terata e qetella ea mohlala o nkehang habobebe: plug cEE 7/7 ho
IEc Plug, l = 2 m |
| ntho e phodisang | cpmpressor e nang le bypass ea khase e chesang |
|
Ho qhekella |
Ka ntle sebakeng sa ho kenya, sebopeho sa fuse c; 230VAc 6A; 115VAc 10A
mohlala o nkehang habonolo: fuse ea ka hare T6.3A / T10A |
| Sehlopha sa tšireletso | IP 20 (EN 60529) |
| Ka nako | 100% |
| Lintlha tsa sete ea alamo | <0 />+10°c |
| Boemo / Alarmrelay | Phetoho ea mahala ea Volt ka ho ikopanya le SPTD |
|
letshwao la boemo ba kgokelo |
terata e bulehileng lipheletsong, l = 1,2m mohlala o nkehang habobebe: Binder 693 |
| Ho fetola li-relay tsa bokhoni | max.250VAc, 2A, min.
5VADc/5mA |
| Maqhubu a ho sebetsa | max. 10/h |
Taba ea ho fetoha ntle le tsebiso
Odara likhoutu
Bakeng sa liodara tse ling ka kopo, fana ka tlhaloso ea karolo le karolo. che. le nomoro ea serial e ngolisitsoeng letlapeng la mofuta oa sesebelisoa.
| Karolo ea No.. | Lintho tse ka sebelisoang |
| 12.90392 | Hose sete pompo ea condensate (5 li-pcs.) |
| K1233155 | consumables kit for sample pompe |
| B1911010 | Filter ea ho lahla (li-pcs tse 3) |
| 17.90001 | Setiiso sa O-ring bakeng sa matlo a sefa (3 li-pcs.) |
| 17.00002 | Sefa fiber element ea glas (5 li-pcs.) |
| 17.00003 | Sefa Element PTFE (3 pcs.) |
| K1233011 | Pompo ea condensate ea sekoaelo sa li-tubing |
| Likarolo tsa tlatsetso | |
| 820 0013 | Fane 230 VAc |
| 820 0021 | Fane 115 VAc |
| 460 0609 | Pontšo ea mocheso 230 VAc, 50/60 hz |
| 460 0614 | Pontšo ea mocheso 115 VAc, 50/60 hz |
| 460 0152 | Sensor ea mocheso |
| 410 0113 | condense drain tube ka O-ring |
| K1204360 | mochine oa condensate oa elektronike kW-2 |
| 17.04000 | kutlo ea condensate kW-1 |
| K1233002A | pompo ea condensate e felile |
| K1233009A | Pompo ea condensate e nang le pulley |
| 32.90520 | hose set condensate pompo Acidflex bakeng sa aggress-
sive condensate (4 li-pcs.) |
| 32.90521 | Sets'oants'o sa pulley pompo ea condensate Acidflex |
| 123 6302 | Sehokelo sa Elbow bakeng sa karolo ea sefa (2 li-pcs.) |
| 410 0101 | Mocheso oa mocheso oa khase PVDF Mono |
| 410 0102 | Mocheso oa mocheso oa khase PVDF Dual |
| K1233151 | Samppompo ea khase 230 VAc |
| K1233153 | Samppompo ea khase 115 VAc |
| K1233014 | Ntlo ea pompo e nang le latch |
| K1907806 | Gateway RS485/USB |
| K1233066 | Enjene ea synchronous |
| K4100115 | Motsoako oa mocheso |
Mosebetsi
Setšoantšo sa phallo ea khase
Likarolo tsena li bokelloa 'me li loketse ho sebetsa ntlong ea tšepe ea lakane:
- Potoloho e laoloang ke matla e nang le chiller
- Thermostat-controlled axial fan
- mocheso oa mocheso
- pompo ea condensate
- Samppompo ea khase
- Metha e phallang e nang le valve ea nale
- Sefa element
- Pontšo ea mocheso le mocheso oa mocheso
- Likhokelo tsa khase le motlakase
- mochine oa condensate (khetho)
- Taolo ea ho phalla (khetho)
Mocheso oa mocheso oa khase
Phallo ea khase e etselitsoe ho tlisa khase e metsi ho kopana le libaka tse pholileng. Bokantle ba mocheso oa mocheso ke thermo-insulated. Sena se thibela ho koaleha ha moea o mongobo oa tikoloho ka ntle ho mochini o futhumatsang mocheso
Ho phodisa
Sistimi ea ho pholisa e tsamaisoang ke chiller e sebelisoa bakeng sa ho pholisa. Fene e sebelisoa bakeng sa ho tlosa mocheso o sa khaotseng tikolohong.
Ho tlosoa ha condensate
Ho etsa bonnete ba hore ho tlosoa ha condensate ho sa khaotse Jcc e na le pompo ea condensate ea JSR-25 (hoo e ka bang 0,30 l / h).
TLHOKOMELO!
Ho qoba ho lutla ha pompo ea condensate, khatello ea ts'ebetso e tlameha ho ba pakeng tsa 85 - 220 kPa abs. Li-tubing tsa pompo ea condensate li ka senyeha 'me li lokela ho hlahlojoa khafetsa le ho nkeloa sebaka, ha ho hlokahala.
Mohloli oa condensate le taolo ea mocheso
Likarolo tsa sampyuniti ea boemo ba khase Jcc e na le sesebelisoa sa condensate kW1 ka boikhethelo. Li-monitor tsa mojule oa elektroniki tse hahelletsoeng ka sensor ea condensate kW1 'me qetellong li etsahala ka nako ea khefu. Ka nako e ts'oanang mocheso oa mochine oa mocheso oa khase o hlahlojoa. Sesebelisoa sa alamo se sebetsoa ka mokhoa oa ts'ebetso 'me se na le likhokahano tsa alamo tse peli tsa volt mahala. (ke hore, Ho matlafatsoa maemong a "ntle"). Ha condensate e fumanoa kapa meeli ea mocheso e fihletsoe, alamo e bontšoa ka pono le ka ho fetisoa ha alamo.
Mohloli oa condensate (khetho)
Sensor e hahiloeng ka har'a condensate e sebelisetsoa ho lemoha hore qetellong ho etsahala condensate ka khefu. Ha condensate e fumanoa, letšoao le bonesa 'me boemo ba boemo bo theoha hang-hang. Ho tsosolosa ts'ebetso ea taolo ho ka khoneha feela ka ho hloekisa le ho omisa karolo ea sensor. Letšoao la mahala la volt le ka sebelisoa ka ntle ka plug ea boemo ho sesebelisoa. Sensor e hahelletsoeng ka har'a condensate e sebelisetsoa ho lemoha hore qetellong ho etsahala condensate ka khefu. Ha condensate e fumanoa, letšoao le bonesa 'me boemo ba boemo bo theoha hang-hang. Ho tsosolosa ts'ebetso ea taolo ho ka khoneha feela ka ho hloekisa le ho omisa karolo ea sensor. Letšoao la mahala la volt le ka sebelisoa ka ntle ka plug ea boemo ho sesebelisoa.
Litlhophiso tsa kamehla tsa feme bakeng sa sebaka se setehileng ke approx. 12 kΩ.
Phetoho ea boleng ba sete ea ho hanyetsa karabelo e ka khoneha ka li-switches tse ngata tsa DIL tse kentsoeng ka PcB. Phetoho ea moeli oa karabelo e ka etsoa ka mehato ea 2kΩ ho tloha 2 ho isa ho 30kΩ.
| Fetola No. | Khanyetso |
| 1 | 2 kΩ |
| 2 | 4 kΩ |
| 3 | 8 kΩ |
| 4 | 16 kΩ |
- Fetola 2 ebe u bulela 3 Ë12kΩ
TLHOKOMELO!
condensate e kanna ea ba le lintho tse kotsi! Apara liaparo tse loketseng tsa tšireletso!
Samppompo ea khase
Likarolo tsa sample pompo ea khase pele ho sample khase ka sekontiri sa khase ho ea ho analyzer. E ka buloa/ea tima ka switjha phanele e ka pele. Tabeng ea boemo ba alamo, pompo e notletsoe ka ho toba.
Sefa element
Likaroloana tse ntle tsa lerōle li arotsoe ho sample khase ka sefe. Lisebelisoa tsa sefa li fumaneha ka fiber ea khalase kapa lisebelisoa tsa PTFE.
TLHOKOMELO!
Emisa sample pompo ea khase pele u bula ntlo ea sefe. Bula ntlo ea sefe feela tlas'a maemo a tlase ho khatello. Sesefa se tiea ha feela O-ring sealing ka har'a cap cap e le teng.
Metha e phallang e nang le valve ea nale
Matla a ho pholisa a sampyuniti ea boemo ba khase e lekanyelitsoe ke molumo oa condensate (phoka ea phoka sebakeng sa khase), mocheso oa ts'ebetso (tempele e teng.) le phallo ea khase. Ho lokisa le ho bonts'a phallo ea khase, sesebelisoa se na le meter ea phallo e nang le valve e kopantsoeng ea nale.
TLHOKOMELO!
Le ka mohla u se ke ua koala valve ea nale ka ho feletseng ho qoba tšenyo ea tsamaiso.
Tlhokomelo ea ho phalla (Khetho)
Phallo ea khase e hlahlojoa ke sensor ea elektronike ea opto haeba samppompo ea khase e buletsoe. Haeba tsela ea optical e khaotsoe ke phallo ea meter ea phallo, molaoli oa elektronike o sebetsa ka metsotsoana e 10 ea ho lieha ho kopana le volt mahala e fumanehang ka mohala oa boemo.
TLHOKOMELO!
Haeba khalase ea ho lekanya ea meter ea phallo e silafetse, sensor ea optical e ke ke ea sebetsa hantle.
Pontšo ea mocheso oa dijithale
Pontšo ea mocheso e bonts'a e bonts'a sampmocheso oa mocheso oa mocheso oa khase. Ts'ebetsong e tloaelehileng, LED 3 e bonesitsoe 'me alamo ea boemo ba boemo e matlafatsoa. Ka holimo ho mocheso oa 7°c pholileng e tletse ho tlōla. Haeba mocheso oa mocheso o phahame ho feta 10 ° c, alamo ea ho fetisetsoa ha boemo e tlosoa matla 'me LED 1 ea bonesa. (Alamo e fetang mocheso)
Haeba mocheso oa sampMocheso oa mocheso oa khase o theoha ka tlase ho 0 ° c li-alamo tsa boemo li tlosoa matla 'me LED 3 ea nyamela. (Ka tlas'a alamo ea mocheso) Haeba ho na le matla a fokolang, alamo ea boemo e fetisetsa marotholi. Melaetsa ea alamo e etsoa e le khokahano e se nang volt. Letšoao la boemo le fetisoa ka terata ea taolo e nang le terata e bulehileng ka ntle ho yuniti.
Pontšo ea liphoso
Lintlha tsa ts'ebetso 5.12. le litsupa
Pele view
Jcc-Q: Wandmontage quer / wall mounting crosswise
Jcc-L: ho kenya lebota ka bolelele
Tlhophiso ea ho kenya
hlahloba sesebelisoa bakeng sa tšenyo leha e le efe e bakoang ke ho tsamaisa thepa. Haeba tšenyo leha e le efe e thehiloe, ikopanye le mofani oa thepa le mofani hang-hang.
hlahloba sesebelisoa le likarolo tse ling khahlanong le tatellano
Litaelo tsa ho kenya
- Hakolla li-main pele u sebetsa karolong ea motlakase ea sesebelisoa.
- boloka tumello e lekaneng ho potoloha yuniti bakeng sa tlhokomelo le moea oa moea oa sample gas conditioner.
- Thepa e tlameha ho hokahanngoa le ho theoa ho latela melao le melaoana ea lehae.
- Sesebelisoa se etselitsoe ho sebelisoa libakeng tse ka hare. Ela hloko moea o lekaneng oa moea o lekaneng haholo-holo ha o kenngoa matlong a koetsoeng, likhabinete tsa tlhahlobo ea fi. Haeba moea o lekaneng, ka mabaka a tekheniki kapa a sebopeho, o sa khonehe, ho kgothaletswa ho sebelisa sehatsetsi se qobelloang, fene kapa moea o futhumatsang moea, o sa tlamehang ho ba le tšusumetso ho moea oa unit's.
Ho phahamisa
- Sheba boemo ba ho hlongoa ho latela litlhaloso.
- Sireletsa yuniti ho pepesehela mahlaseli a letsatsi ho feteletseng kapa mehloling e feteletseng ea mocheso le puleng le litšila.
- hokela ho kena le ho tsoa ha sample khase e futhumatsang mocheso (s) le ho hlahloba ho lutla
- hokela ho tsoa ha condensate tsamaisong ea pokello ea condensate 'me u hlahlobe ho lutla.
Sampkhokahano ea khase
e kopanya DN 4/6 mm tubing le nut le ferrule dikgokelong tsa kgase tsa "IN" le "OUT".
Condensate drain
Hlakola li-tubing ka ferrule le linate ka DN 4/6 mm sebakeng sa pompo.
TLHOKOMELO!
Hangata condensate e na le asiti. Ka hona ho lokela ho nkuoa mehato e nepahetseng ea polokeho sebakeng sa ho ntša metsi 'me ho lateloe melao ea ho lahla lino tse nang le asiti! Apara liaparo tse loketseng tsa tšireletso!
Tlhahlobo ea ho lutla
TLHOKOMELO!
hlahloba likhokahano tsohle tsa khase khahlanong le ho lutla ka mor'a ho kenya li-tubing.
Lihokelo tsa motlakase
- hlahloba sebaka sa sebakatage, khafetsa le tšebeliso ea matla khahlano le mofuta oa poleiti.
- hokela sesebelisoa sa 2-pole ho phepelo e kholo; sesebelisoa ha se na sesebelisoa.
- Thepa e tlameha ho etsoa sebakeng se khethiloeng ho latela melao le melaoana ea lehae.
- Yuniti e fanoa ntle le plug. Yuniti e tlameha ho hokahana ho latela melao le melao ea naha ea ho kenya, lintlha tse holim'a mofuta oa poleiti le setšoantšo sa wiring.
- Khokahano e tlameha ho etsoa ke basebetsi ba tšoanelehang.
- Fusing e tlameha ho etsoa ka ntle sebakeng sa ho kenya (ho ea ka poleiti ea mofuta)
Kamehla sebelisa mabitso tlas'a lintlha tse boletsoeng. Bakeng sa ho hokahanya meroalo ea inductive le capacitive sebelisa lipotoloho tse loketseng tsa ts'ireletso (mohlala, li-diode tsa ho hlaphoheloa bakeng sa inductive le serial resistance for capacitive loads). Li-relay li bontšoa maemong a hona joale a seng makae (ho hloleha ho bolokehile).
hokela mabitso a boemo ho ya ka kerafo.
Sehokelo plug / terminal strip
TLHOKOMELO
Sesebelisoa sena se sebetsa ka motlakase oa motlakase. Nakong ea ts'ebetso, likarolo tse ling tsa yuniti li matlafatsoa ka matla a kotsitage! Ho tlosa sekoahelo ho tla pepesa likarolo tse phelang. Pele o lokisoa kapa o lokisoa, hokela ho tsoa mecheng ea motlakase. Teko ea ho itšehla thajana ka matla a phahamengtage ha e lumelloe 'me e ka lebisa tšenyo ea lihlopha. Ke basebetsi ba nang le litsebo feela ba koetlisitsoeng ho ea ka bukana ena ba lokelang ho sebetsa le ho boloka sesebelisoa sena. Bakeng sa ts'ebetso e itseng le e bolokehileng sesebelisoa se hloka ho tsamaisoa ka hloko, ho ba karolo ea ts'ebetso e reriloeng hantle, e kentsoeng ka nepo le ho sebetsoa le ho hlokomeloa ho latela litaelo tsena.
Litlhoko tsa litsebo tsa basebetsi:
Basebeletsi ba tšoanelehang ka kutloisiso ea bukana ena le/kapa litšupiso tsa temoso ke batho, ba tsebang ho seta, ho hlongoa, ho qala, le ho sebetsa ha sehlahisoa sena 'me ba na le mangolo a lekaneng.
E qalang
- hlahlobisisa tlhomamiso e nepahetseng.
- Review lisebelisoa tsa ho senya.
- hlahloba ho dutla.
- hlahloba bakeng sa boemo ba tshekaletseng.
TLHOKOMELO!
Pele ho switjha ka sesebelisoa hlahloba rated mofuta poleiti voltage khahlano le mola voltage.
Fetola phepelo ea motlakase ea sampyuniti ea boemo ba khase. chiller le pompo ea condensate (e ka bang teng tieho ea ho qala) lia sebetsa. Molaoli oa elektronike o bontša mocheso oa mochine oa mocheso oa khase. Ka mor'a nako e khutšoanyane ea ho qala, mocheso oa mocheso oa mocheso oa khase o theoha ka tlaase ho moeli o ka holimo oa alamo 'me boemo ba boemo bo sa lefelloeng ba volt bo matlafatsoa. (Letšoao la alamo: lebitso le bulehileng)
- Yuniti e se e loketse ho sebetsa. The samppompo ea khase e lokolloa. Fetola sesebelisoa sa pompo sebakeng sa "PUMP ON".
- Ea ka hare samppompo e buloa ke phepelo ea pompo ea phepelo e nang le motlakase oa kantletage ea 24 VDc.
- Fetola phallo ea khase ka valve ea nale karolong e ka pele ea sesebelisoa.
- hlahloba ho hlongoa kaofela bakeng sa ho lutla. Ka mor'a moo, mokhoa oa ho kenya o phethehile.
TLHOKOMELO!
Ela hloko tekanyo e phahameng ea ho phalla ho amana le phoka e kenang le mocheso oa tikoloho (sheba litlhaloso tsa tekheniki).
TLHOKOMELO!
Ho se latele mehato ea taolo ho ka lebisa likotsing tse tebileng kapa tšenyo ea thepa le kotsi ea botho!
Qetello ea Ts'ebetso
Koala sample khase e phallang ka sample gas conditioning unit ka ho tima samppompo ea khase; boloka sampyuniti ea boemo ba khase e sebetsang bonyane 10 min. (ho pompa masala a condensate). Ka mor'a moo, koala sample gas cooler ka ho hakolla maqhama a motlakase.
Ho theola
- Koala sample khase e phallang ka samppompo ea khase.
- Hlatsoa sesebelisoa ka moea o hloekileng kapa naetrojene.
- Hakolla li-unit tse fumanehang setšeng.
- Tlosa li-fittings 'me u hakolle likhokahano tsohle tsa khase.
- Tlosa probe ho tloha flange ea ts'ebetso.
- Tlosa mokelikeli oa condensate.
- Boloka le ho lahla ka botsebi
Recycling
Yuniti e na le lintho tse loketseng ho sebelisoa hape le likarolo tse hlokang ho lahla ka mokhoa o khethehileng. ka hona o kopuoa ho etsa bonnete ba hore yuniti e tla sebelisoa hape qetellong ea nako ea ts'ebeletso ea eona.
Tlhokomelo le tšebeletso
HLOKOMELA
Haeba thepa e khutlisetsoa ho JcT Analysentechnik, ka mabaka a tlhokomelo kapa tokiso, e tla amoheloa feela ka mor'a foromo ea RMA ho rona. websebaka se felile (www.jct.at/rma). Sena ke ho netefatsa polokeho ea basebetsi ba JcT.
Jcc sampli-conditioner tsa khase li etselitsoe ts'ebetso ea nako e telele e tsoelang pele ka bonyane ba litlhoko tsa tlhokomelo. Tlhokomelo e lekanyelitsoe ho hloekisa mapheoana a pholileng ka moea o hatelitsoeng, le tlhahlobo ea nako le nako ea samppompo ea khase, filthara le li-tubing tsa pompo tsa condensate khahlano le ho lutla le maemo. Ts'ebetsong e tsoelang pele, ho khothalletsoa ho khutlisa li-tubing tsa condensate ka mor'a likhoeli tse ling le tse ling tse 3.
TLHOKOMELO!
Pele mosebetsi ofe kapa ofe oa ho lokisa kapa oa ho lokisa o etsoa sesebelisoa se butsoeng, phepelo ea motlakase e tlameha ho khaoloa. Mosebetsi ofe kapa ofe oa ho lokisa le oa ho lokisa sesebelisoa se bulehileng le se matlafalitsoeng se tla etsoa feela ke basebetsi ba nang le tsebo ba koetlisitsoeng ka botlalo le ba tloaelaneng le likotsi tse amehang! Ho lahla likarolo tse fapanyetsanoang ho tlameha ho hlompha melao ea hajoale ea tikoloho, polokeho le tekheniki.
Condenser
Ts'ebetso ea sampyuniti ea boemo ba khase e fokotsoa ke condenser e silafetseng. Bakeng sa tlhokomelo switjha sampyuniti ea conditioning ea khase e tima ebe e hakolla ho li-main. Tlosa karolo ea lehlakoreng la tšebeletso 'me u hloekise likotlo tse pholileng tsa condenser ka moea o hatelitsoeng kapa borashe bo bonolo. Hlahloba litšila khafetsa 'me u hloekise haeba ho hlokahala. Linako tsa nako li itšetlehile ka sebaka le maemo a ho kenya
Diaphragm le li-valve tsa samppompo ea khase
Diaphragm le li-valve tsa samppompo ea khase ke lintho tse ka sebelisoang. Li lokela ho nkeloa sebaka haeba matla a phallo a sa lekana. Ke basebetsi ba tšoanelehang feela ba ka etsang tlhokomelo ena. Bula sesebelisoa 'me u latele litaelo tse ka hare ho sephutheloana sa spare part.
Pompo ea condensate
Li-hose tsa pompo ea condensate le likoahelo tsa li-tubing ke lintho tse ka sebelisoang 'me li tlameha ho nkeloa sebaka khafetsa ho latela maemo a ts'ebetso kapa haufinyane kamora likhoeli tse 6. Ho fetola li-hoses tsa pompo ea condensate ho hlokahala mehato e latelang:
- Fetola sample gas cooler off (hakolla lisebelisoa tse kholo).
TLHOKOMELO!
condensate e kanna ea ba le lintho tse kotsi kapa tse senyang! Apara liaparo tse loketseng tsa tšireletso!
Lintlha tse ncha tsa sekoaelo sa pompo le li-tubing
Mohato oa 1
Tlosa li-tubes tsa Viton ka bobeli ka ho lahleheloa ke linate tse loketseng ka ho pota-pota
Mohato oa 2
Hula li-tubes tse peli tsa pompo ea condensate ho li-fittings
Mohato oa 3
Tlosa treadmill ho kenyeletsoa le pompo ea pompo ka ho potoloha ka lock-clip ho ea pele
View
Treadmill e sa kengoang e nang le tube ea pompo
Mohato oa 4
Tlosa sete ea pompo ea pompo (ho kenyeletsoa le likarolo tsa pheletso) ho tloha tereneng ea tataiso ea treadmill ebe u e nkela sebaka ka sete e ncha ea pompo.
View
tataisa seporo treadmill ka ho qaqileng
View
tataisa seporo treadmill ka ho qaqileng
Mohato oa 5
Kenya treadmill holim'a hlooho ea pompo, beha likarolo tse peli tsa ho qetela ka terene ho fihlela li kena.
Mohato oa 6
Sotha k'haontareng ea senotlolo sa senotlolo ho ea ka nako ho fihlela lipheletsong ka bobeli li hohla hantle
Mohato oa 7
hlahloba pompo e nepahetseng ea pompo le boemo ba senotlolo sa senotlolo Kenya li-Suction and Pressure tubes hape 'me u hatelle linate li tiile.
Lintlha tsa ho nkela sebaka sa Pulley
Mohato oa 1
Hlakola sekoaelo sa li-tubing ka tube ea pompo (sheba mohato oa 1-3) Fumana le ho bula likurufu tse peli bakeng sa ho lokisa hlooho ea pompo 'me u hule hlooho ea pompo ka sets'oants'o sa pulley se tima.
Mohato oa 2
Sututsa ntlo ea pompo ka sets'oants'o se secha sa pulley ka morao hanyane holim'a axle, shaftshoulder e bonts'ang ka pele. Hlokomela hore liliba tsohle tse 'ne li be maemong a nepahetseng. Lokisa ntlo ea pompo ka li-screw tse peli. Kenya sekoaelo sa li-tubing hape ka pompo ea pompo
Sensor ea condensate
Haeba ho fumanoa condensate, lokisa sesosa 'me u hloekise sensor ea condensate. Tlosa lehlakore le letšehali kapa le letona. Sensor ea condensate e fumaneha bohareng ka lehlakoreng le ka pele.
Bula nut mme u tlose sensor ho ea tlase. hloekisa le ho omisa sensor. Omisa le tsela ea khase ho theosa le molapo o chesang mocheso. hlahloba unti bakeng sa ho lutla pele o qala ts'ebetso.
Sefa element
hlahloba filthara kapa ho e-na le hoo, nako le nako, 'me u nke sebaka haeba ho hlokahala
TLHOKOMELO!
Emisa sample pompo ea khase le sebaka sa filthara feela tlas'a maemo a fokolang a khatello. Sefa ka botlalo (sefefa sa ho lahla)
Mohato oa 1
Hula sekotwana sa hose se kaholimo
Mohato oa 2
Hula sekotwana sa hose se tlase
Mohato oa 3
Hula karolo ea sefe hammoho le likhokahano tse peli tsa setsoe
Mohato oa 4
Hula likotoana tsa hose lihokelong tsa setsoe
Mohato oa 5
Thellelisa likhokahanyo tsa pheletso ea setsoe holim'a elemente e ncha ea filthara Thaba ea likotopo tsa hose Kenya yuniti ea sefe ka tatellano ea morao.
Lethathamo la tlhahlobo ea liphoso
| Ha e sebetse hantle | Lebaka / pheko |
| Pontšo e lefifi | • hlahloba fuse ea lisebelisoa tsa motlakase
• laola bofokoli ba elektroniki, Ho nkeloa sebaka ke tšebeletso • Sekhao sa polokeho se qalisoa Taolo ea tsamaiso ka basebetsi ba tšoanelehang. Tlosa sekoaelo se ka mahlakoreng 'me u tobelle konopo ea ho seta botjha ea thipa ea polokeho. Haeba ho etsahala hape romella sesebelisoa ho JcT ho ea lokisoa. |
| Mocheso o ka holimo ho 10°c | • kompressor defective call JcT service
• Sample Phallo ea khase holimo haholo Fokotsa sampphallo ea khase, • Mocheso oa tikoloho o phahameng haholo • condenser litšila hloekileng condenser • condenser fan defective Fetola fan ka basebetsi ba tšoanelehang letsetsa JcT tšebeletso |
| Mocheso o ka tlase ho 0°c | • Ts'ebeletso ea JcT e nang le bothata ba ho laola motlakase
• Mocheso oa tikoloho o tlase haholo |
| Metsi sample khase | • kompressor defective call JcT service
• Sample khase e phalla holimo haholo Fokotsa sampsekhahla sa phallo ea khase, hlahloba lintlha • condenser litšila hloekileng condenser • Fane e fosahetse Kenya sebaka sa fan ka basebetsi ba tšoanelehang, letsetsa tšebeletso ea JcT • Jamming pompo ea condensate Tlosa sete ea tube, letsetsa tšebeletso ea JcT |
| khase e koetsoeng | • Sample sefa JF1 e koetsoe Kenya khatriji ea sefe |
| • Belofo ea nale ea metha e phallang ha e lekane ho bula | |
| • Tšilafalo e bakoang ke lerōle le e-s'o arohane kapa sublimate
Tšebeliso ea pre filter hloekileng sample li-tubes tsa khase le sampmochini oa mocheso oa khase hlahloba ho lumellana pele u sebelisa lisebelisoa tsa ho hloekisa |
|
| • Samppompo ea khase e haelloang ke mohala oa JcT | |
| condensate - alamo | • Felisa sesosa (sheba wet flue gas)
Tlosa sensor ea condensate ka ho theola nut le ho hulela tlase, e hloekileng le e omileng ea sensor |
| Ha e sebetse hantle | Lebaka / pheko |
| Samppompo ea khase e emisa | • Felisa sesosa (sheba wet flue gas)
Tlosa sensor ea condensate ka ho theola nut le ho hulela tlase, e hloekileng le e omileng ea sensor • kühler überlastet |
| Compressor ha e sebetse | • Sekhao sa polokeho se qalisoa
Taolo ea tsamaiso ka basebetsi ba tšoanelehang. Tlosa sekoaelo se ka mahlakoreng 'me u tobelle konopo ea ho seta botjha ea thipa ea polokeho. Haeba ho etsahala hape romella sesebelisoa ho JcT ho ea lokisoa. • Tšireletso ea ka hare ho mocheso e kentsoe Thempereichara ea tikoloho e phahame haholo kapa boholo. Maqhubu a ts'ebetso a fetisitsoeng, compressor e qala ka bo eona kamora ho pholile. |
Litekanyo
Buka ea Jcc
Lauper Instruments AG
- Irisweg 16B
- CH-3280 Murten
- Mohala +41 26 672 30 50
- info@lauper-instruments.ch
- www.lauper-instruments.ch.
Litokomane / Lisebelisoa
 |
LITLHAKISO TSA LAUPER JCC Tlhahlobo ea Khase [pdf] Bukana ea Mosebelisi Ho Fumana Khase ea JCC, JCC, Ho Fumana Khase, Ho fumanoa |
