LAUNCHKEY MK3 25-Linotlolo tsa USB MIDI Keyboard Controller

Mabapi le Tataiso ena

Tokomane ena e fana ka lintlha tsohle tseo u li hlokang hore u tsebe ho laola Launchkey MK3.
Launchkey MK3 e buisana e sebelisa MIDI ka USB le DIN. Tokomane ena e hlalosa ts'ebetsong ea MIDI bakeng sa sesebelisoa, liketsahalo tsa MIDI tse tsoang ho eona, le hore na likarolo tse fapaneng tsa Launchkey MK3 li ka fumaneha joang ka melaetsa ea MIDI.
Lintlha tsa MIDI li hlahisoa bukeng ena ka mekhoa e mengata e fapaneng:

• Tlhaloso e hlakileng ea Senyesemane ea molaetsa.
• Ha re hlalosa noto ea 'mino, bohareng ba C bo nkoa e le 'C3' kapa noto ea 60. MIDI kanale 1 ke kanale ea MIDI e nang le linomoro tse tlase: likanale li tloha ho 1 - 16.
•  Melaetsa ea MIDI e boetse e hlahisoa ka data e hlakileng, ka litekanyo tsa decimal le tsa hexadecimal. Nomoro ea hexadecimal e tla lula e lateloa ke 'h' le tesimale e lekanang le eona e fanoeng ka masakaneng. Bakeng sa mohlalaample, molaetsa o mabapi le kanale 1 o bontšoa ke boemo ba byte 90h (144).

Bootloader

Launchkey MK3 e na le mokhoa oa bootloader o lumellang mosebelisi ho hlophisa le ho boloka litlhophiso tse itseng. Bootloader e fumaneha ka ho tšoara likonopo tsa Octave Up le Octave Down hammoho ha o ntse o hokela sesebelisoa.
Konopo e tsitsitseng ea Chord e ka sebelisoa ho fetola Easy Start. Ha Easy Start e BUTSE, Launchkey MK3 e hlaha e le Sesebelisoa sa polokelo ea Boipheliso ho fana ka boiphihlelo bo bonolo haholoanyane ba lekhetlo la pele. U ka tima sena hang ha u se u tloaelane le sesebelisoa sa ho tima Sesebelisoa sena sa polokelo ea Mass.
Konopo ea Scene Launch e ka sebelisoa ho kopa ho bonts'a nomoro ea mofuta oa Bootloader. Konopo ea Stop Solo Mute e ka sebelisoa ho khutlela ho bonts'a lisebelisoa tsa Sesebelisoa. Ho Launchkey MK3, tsena li bonts'a ka mokhoa o bonolo ho baloa ho LCD, leha ho le joalo joalo ka lihlahisoa tse ling tsa Novation, linomoro tsa nomoro ea mofuta le tsona li bonts'a lipampiring, nomoro ka 'ngoe e emetsoe ke sebopeho sa eona sa binary.
The Device Select, Device Lock kapa konopo ea Play e ka sebelisoa ho qala Ts'ebeliso (ho tsena ke konopo ea Lock ea Sesebelisoa e khantšang kaha tse ling tse peli ha li na li-LED tse ka li khantšang).

MIDI ho Launchkey MK3

Launchkey MK3 e na le likhokahano tse peli tsa MIDI tse fanang ka lipara tse peli tsa MIDI le liphetho ho feta USB. Ke tse latelang:

• LKMK3 MIDI In / Out (kapa sebopeho sa pele ho Windows): Sehokelo sena se sebelisetsoa ho amohela MIDI ho tsoa ho ts'ebetso (linotlolo, mabili, pad, pitsa, le fader Custom Modes); mme e sebelisetsoa ho fana ka tlhahiso ea kantle ea MIDI.
•  LKMK3 DAW In / Out (kapa segokanyimmediamentsi sa bobeli ho Windows): Sehokelo sena se sebelisoa ke DAWs le software e ts'oanang ho sebelisana le Launchkey MK3.
  Launchkey MK3 e boetse e na le boema-kepe ba tlhahiso ea MIDI DIN, e fetisang data e ts'oanang le sebopeho sa LKMK3 MIDI In (USB). Hlokomela hore likarabo ho likopo tse rometsoeng ka LKMK3 MIDI Out (USB) li khutlisoa feela ka LKMK3 MIDI In (USB).
  Haeba u lakatsa ho sebelisa Launchkey MK3 e le sebaka sa taolo bakeng sa DAW (Digital Audio Workstation), mohlomong u tla batla ho sebelisa sebopeho sa DAW (Sheba khaolo ea DAW mode).

Ho seng joalo, o ka sebelisana le sesebelisoa ka sebopeho sa MIDI.
Launchkey MK3 e romela Note On (90h - 9Fh) ka lebelo la zero bakeng sa Li-Note Offs. E amohela li-Note Offs (80h - 8Fh) kapa Note Ons (90h - 9Fh) ka lebelo la zero bakeng sa Note Off.

Molaetsa oa Potso ea Sesebelisoa

Launchkey MK3 e arabela molaetsa oa Universal Device Inquiry Sysex, o ka sebelisoang ho khetholla sesebelisoa. Phapanyetsano ena e tjena:
The li-encode tsa tšimo tseo Launchkey MK3 e hokahaneng:

• 34h (52): Launchkey MK3 25
•  35h (53): Launchkey MK3 37
•  36h (54): Launchkey MK3 49
• 37h (55): Launchkey MK3 61

The kapa tšimo e bolelele ba li-byte tse 4, e fana ka Kopo kapa mofuta oa Bootloader, ka ho latellana. Phetolelo ke eona phetolelo e ka ba viewed o sebelisa likonopo tsa Scene Launch le Stop-Solo-Mute ho Bootloader, e fanoeng e le li-byte tse 'ne, byte e' ngoe le e 'ngoe e tsamaellanang le nomoro e le' ngoe, ho tloha ho 0 - 9.

Sebopeho sa molaetsa oa sistimi se sebelisoang ke sesebelisoa

Melaetsa eohle ea SysEx e qala ka hlooho e latelang ho sa tsotelehe hore na o ea kae (Host => Launchkey MK3 kapa Launchkey MK3 => Host):
Hex: F0h 00h 20h 29h 02h 0Fh 240 0 32 41 2 15
Tšitoe:
Ka mor'a sehlooho, taelo ea byte ea latela, e khetha mosebetsi oo u lokelang ho o sebelisa.

Mokhoa o ikemetseng (MIDI).

Launchkey MK3 e sebetsa ka mokhoa oa Standalone. Mokhoa ona ha o fane ka ts'ebetso e khethehileng ea ho sebelisana le li-DAWs, sebopeho sa DAW in / out (USB) se lula se sa sebelisoe molemong ona. Leha ho le joalo, ho fana ka mekhoa ea ho nka liketsahalo ho likonopo tsohle tsa Launchkey MK3, ba romella liketsahalo tsa MIDI Control Change ho Channel 16 (boemo ba Midi: BFh, 191) ho MIDI in / out (USB) le boema-kepe ba MIDI DIN:
Decimal:

Ha u theha Mekhoa e Tloaelehileng bakeng sa Launchkey MK3, hopola tsena haeba u theha Mokhoa o Tloaelehileng ho sebetsa ho MIDI Channel 16.

Mokhoa oa DAW

Mokhoa oa DAW o fana ka ts'ebetso bakeng sa li-DAW le DAW joalo ka software ho hlokomela lihokelo tse hlakileng tsa basebelisi sebakeng sa Launchkey MK3. Bokhoni bo hlalositsoeng khaolong ena bo fumaneha feela hang ha mokhoa oa DAW o buletsoe.
Mesebetsi eohle e hlalositsoeng khaolong ena e fumaneha ka LKMK3 DAW In / Out (USB) feela.

Taolo ea mokhoa oa DAW

Liketsahalo tse latelang tsa MIDI li sebelisoa ho seta mokhoa oa DAW:

• Channel 16, Hlokomela 0Ch (12): DAW mode nolofalletsa / tima.
•  Channel 16, Tlhokomeliso 0Bh (11): Taolo e tsoelang pele Ketsahalo ea ho ama e nolofalletsa / e tima.
• Channel 16, Tlhokomeliso 0Ah (10): Taolo e tsoelang pele ea Pot Pickup nolofalletsa / thibela.

Ka nako e sa lekanyetsoang, ha ho kenoa mokhoa oa DAW, Taolo e tsoelang pele Liketsahalo tsa Touch lia tingoa, 'me Taolo e tsoelang pele ea Pot Pickup e koetsoe.
Ketsahalo ea Note On e kenya mokhoa oa DAW kapa e nolofalletsa tšobotsi e fapaneng, ha ketsahalo ea Note Off e tsoa ka mokhoa oa DAW kapa e tima tšobotsi e amehang.
Ha DAW kapa DAW joalo ka software e lemoha Launchkey MK3 mme e hokela ho eona, e lokela ho qala ka ho kenya DAW mode (romela 9Fh 0Ch 7Fh), ebe, ha ho hlokahala, e nolofalletsa likarolo tseo e li hlokang.
Ha DAW kapa DAW joalo ka software e tsoa, ​​e lokela ho tsoa mokhoeng oa DAW ho Launchkey MK3 (romela 9Fh 0Ch 00h) ho e khutlisetsa mokhoeng oa Standalone (MIDI).

Sebaka sa Launchkey MK3 ka mokhoa oa DAW

Ka mokhoa oa DAW, ho fapana le mokhoa oa Standalone (MIDI), likonopo tsohle le likarolo tse kaholimo tse sa sebetseng (joalo ka Mekhoa e Tloaelehileng) li ka fumaneha mme li tla tlaleha ka LKMK3 DAW In / Out (USB) feela. Likonopo ntle le tsa Faders li entsoe 'mapa ho laola liketsahalo ka tsela e latelang:
Decimal:

Hlokomela hore ho fana ka tekanyo e itseng ea ho lumellana ha mongolo le Launchkey Mini MK3, likonopo tsa Scene Up le Scene Down le tsona li tlaleha CC 68h (104) le 69h (105) ka ho latellana ho Channel 16.
Li-indices tsa Control Change tse thathamisitsoeng li boetse li sebelisoa bakeng sa ho romela mebala ho li-LED tse tsamaellanang (haeba konopo e na le leha e le efe), bona khaolo ea Colouring holimo ka tlase.
Mefuta e meng e fumaneha ka mokhoa oa DAW
Hang ha o le maemong a DAW, mekhoa e meng e latelang ea fumaneha:

• Session le Sesebediswa Khetha mokhoa ho Liphase.
• Sesebelisoa, Bolumo, Pan, Send-A le Send-B ho Lipitsa.
• Sesebelisoa, Bolumo, Send-A le Send-B ho Faders (LK 49 / 61 feela).

Ha o kenya mokhoa oa DAW, bokaholimo bo hlophisoa ka mokhoa o latelang:

• Pads: Seboka.
• Lipitsa: Pan.
•  Faders: Bolumo (LK 49 / 61 feela).

DAW e lokela ho qala e 'ngoe le e 'ngoe ea libaka tsena ka nepo.
Tlaleho ea mokhoa ebe u khetha
Mefuta ea li-Pads, Pots le Faders e ka laoloa ke liketsahalo tsa Midi, hape e tlalehoa ke Launchkey MK3 neng kapa neng ha e fetola mokhoa ka lebaka la ts'ebetso ea mosebelisi. Melaetsa ena e bohlokoa ho e hapa kaha DAW e lokela ho latela litlhophiso tsena le ho sebelisa bokaholimo ho latela mokhoa o khethiloeng.
Mefuta e meng
Liphetoho tsa mokhoa oa pad lia tlalehoa kapa li ka fetoloa ke ketsahalo e latelang ea Midi:

• Channel 16 (boemo ba Midi: BFh, 191), Phetoho ea Taolo 03h (3)
  Mefuta ea Pad e entsoe ka 'mapa oa boleng bo latelang:
• 00h (0): Mokhoa o Tloaelehileng 0
• 01h (1): Sebopeho sa meropa
• 02h (2): Sebopeho sa kopano
• 03h (3): Sekala Chords
•  04h (4): User Chords
•  05h (5): Mokhoa o Tloaelehileng 0
• 06h (6): Mokhoa o Tloaelehileng 1
• 07h (7): Mokhoa o Tloaelehileng 2
•  08h (8): Mokhoa o Tloaelehileng 3
• 09h (9): Khetha sesebelisoa
•  0Ah (10): Ho tsamaea

Mekhoa ea pitsa
Liphetoho tsa mokhoa oa pitsa li tlalehoa kapa li ka fetoloa ke ketsahalo e latelang ea Midi:

• Channel 16 (boemo ba Midi: BFh, 191), Phetoho ea Taolo 09h (9)
  Mefuta ea Pitsa e entsoe ka 'mapa oa boleng bo latelang: - 00h (0): Mokhoa o Tloaelehileng 0
•  01h (1): Molumo
• 02h (2): Sesebelisoa
• 03h (3): Pan
• 04h (4): Send-A
•  05h (5): Send-B
• 06h (6): Mokhoa o Tloaelehileng 0
•  07h (7): Mokhoa o Tloaelehileng 1
•  08h (8): Mokhoa o Tloaelehileng 2
• 09h (9): Mokhoa o Tloaelehileng 3

Mefuta ea Fader (LK 49 / 61 feela)
Liphetoho tsa mokhoa oa Fader lia tlalehoa kapa li ka fetoloa ke ketsahalo e latelang ea Midi:

• Channel 16 (boemo ba Midi: BFh, 191), Control Change 0Ah (10)

Mefuta ea Fader e hlophisitsoe ho latela litekanyetso tse latelang:

• 00h (0): Mokhoa o Tloaelehileng 0
•  01h (1): Molumo
• 02h (2): Sesebelisoa
•  04h (4): Send-A
• 05h (5): Send-B
• 06h (6): Mokhoa o Tloaelehileng 0
• 07h (7): Mokhoa o Tloaelehileng 1
• 08h (8): Mokhoa o Tloaelehileng 2
• 09h (9): Mokhoa o Tloaelehileng 3

Mokhoa oa kopano

Mokhoa oa Session ho li-Pads o khethoa ha o kenya mokhoa oa DAW, mme ha mosebelisi a o khetha ka Shift menu. Li-pads li tlaleha joalo ka Tlhokomeliso (boemo ba Midi: 90h, 144) le Aftertouch (boemo ba Midi: A0h, 160) liketsahalo (ea morao-rao ha feela Polyphonic Aftertouch e khethiloe) ho Channel 1, 'me e ka fumanoa bakeng sa ho kenya mebala li-LED tsa tsona ka tse latelang. indices:

Mokhoa oa moropa

The Drum mode on Pads e nka sebaka sa Drum mode of Standalone (MIDI) mode, e fana ka bokhoni ho DAW ho laola mebala ea eona. Li-pads li tlaleha joalo ka Tlhokomeliso (boemo ba Midi: 9Ah, 154) le Aftertouch (boemo ba Midi: AAh, 170) liketsahalo (ea morao-rao ha feela Polyphonic Aftertouch e khethiloe) ho Channel 10, 'me e ka fumanoa bakeng sa ho kenya mebala li-LED tsa tsona ka tse latelang. indices:

Sesebediswa Khetha mokgwa

Mokhoa oa ho khetha lisebelisoa ho li-Pads o khethoa ka bohona ha o tobetsa konopo ea Khetho ea Sesebelisoa (Launchkey MK3 e romella melaetsa e tsamaisanang le Tlaleho ea Mokhoa ha o tobetsa konopo fatše ebe o e lokolla). Lipalo li tlaleha joalo ka Tlhokomeliso (boemo ba Midi: 90h, 144) le Aftertouch (boemo ba Midi: A0h, 160) liketsahalo (ea morao-rao ha feela Polyphonic Aftertouch e khethiloe) ho Channel 1 'me e ka fumanoa bakeng sa ho kenya mebala li-LED tsa tsona ka li-indices tse latelang. :

Mekhoa ea pitsa

Lipitsa ka mekhoa eohle e latelang li fana ka sete e tšoanang ea Liphetoho tsa Taolo ho Channel 16 (boemo ba Midi: BFh, 191):

• Sesebelisoa
•  Bolumo
• Pan
•  Romela-A
• Romela-B

Li-indices tsa Control Change tse fanoeng ke tse latelang:

Haeba liketsahalo tsa Continuous Control Touch li nolofalitsoe, Touch On e romeloa e le ketsahalo ea Control Change e nang le Value 127 ho Channel 15, ha Touch Off e romeloa e le ketsahalo ea Control Change e nang le Value 0 ho Channel 15. Bakeng sa ex.ample, Pitsa e ka ho le letšehali e tla romela BEh 15h 7Fh bakeng sa Touch On, le BEh 15h 00h bakeng sa Touch Off.

Mefuta ea Fader (LK 49 / 61 feela)

Li-Fader ka mekhoa eohle e latelang li fana ka sete e tšoanang ea Liphetoho tsa Taolo ho Channel 16 (boemo ba Midi: BFh, 191):

• Sesebelisoa
•  Bolumo
• Romela-A
• Romela-B

Li-indices tsa Control Change tse fanoeng ke tse latelang:

Haeba liketsahalo tsa Continuous Control Touch li nolofalitsoe, Touch On e romeloa e le ketsahalo ea Control Change e nang le Value 127 ho Channel 15, ha Touch Off e romeloa e le ketsahalo ea Control Change e nang le Value 0 ho Channel 15. Bakeng sa ex.ample, Fader e ka ho le letšehali e ne e tla romela BEh 35h 7Fh bakeng sa Touch On, le BEh 35h 00h bakeng sa Touch Off.

Ho taka bokahodimo

Bakeng sa litsamaiso tsohle lebella hore mokhoa oa Drum, Tlhokomeliso, kapa Phetoho ea Taolo e tšoanang le e hlalositsoeng litlalehong e ka romelloa ho kenya mebala LED e tsamaellanang (haeba taolo e e-na le eona) liteisheneng tse latelang:

• Channel 1: Beha 'mala o emeng.
• Channel 2: Seta 'mala o benyang.
• Channel 3: Seta 'mala oa pulsing.
• Channel 16: Beha 'mala o boputsoa o emeng (litaolo tse amanang le CC feela).

Bakeng sa Drum mode ho Pads, ho sebetsa likanale tse latelang:

• Channel 10: Beha 'mala o emeng.
•  Channel 11: Seta 'mala o benyang.
•  Channel 12: Seta 'mala oa pulsing.
  Mmala o khethoa phaleteng ea mebala ka lebelo la ketsahalo ea Hlokomela kapa Boleng ba Phetoho ea Taolo.
  Likonopo tse latelang tse amohelang 'mala li na le LED e tšoeu, kahoo 'mala ofe kapa ofe o tla hlahisoa e le moriti oa bohlooho:
• Sesebelisoa sa thepa
• Letsoho/Khetho (LK 49 / 61 feela)

Likonopo tse latelang tse fanang ka liketsahalo tsa MIDI ha li na LED, kahoo 'mala ofe kapa ofe o romelloang ho tsona o tla hlokomolohuoa:

• Tšoara MIDI
•  Boholo
•  Tobetsa
• Etsolla
•  Bapala
• Ema
• Rekota
•  Loop
• Track Left
• Track Right
• Khetho ea Sesebelisoa
• Shift

Phalete ea mebala

Ha u fana ka mebala ka lintlha tsa MIDI kapa liphetoho tsa taolo, mebala e khethoa ho latela tafole e latelang, decimal:

Tafole e tšoanang e nang le indexing ea hexadecimal:

Mmala o benyang

Ha o romela 'mala o benyang,' mala o benya pakeng tsa o behiloeng joalo ka 'mala o tsitsitseng kapa oa Pulsing (A), le o hlahang ketsahalong ea MIDI e benyang (B), ka 50% ea potoloho ea mosebetsi, e hokahaneng le oache e otlang ea MIDI (kapa 120bpm kapa oache ea ho qetela haeba ho se na oache). Nako e le 'ngoe e nka nako e telele.

'Mala oa ho phunya

Maqhubu a mebala pakeng tsa lefifi le matla a felletseng a hokahantsoeng le oache e otlang ea MIDI (kapa 120bpm kapa oache ea ho qetela haeba ho se na oache e fanoeng). Nako e le 'ngoe e bolelele ba li-beats tse peli, e sebelisa waveform e latelang:

Examples
Bakeng sa tsena exampLeha ho le joalo, kenya mokhoa oa DAW e le hore li-pads li be maemong a Session ho amohela melaetsa ena. Ho khantša letlapa le ka tlase le letšehali le tsitsitse:
Host => Launchkey MK3:
Hex: 90h 70h 05h
Tšitoe: 144 112 5
Ena ke Note On, Channel 1, Note number 70h (112), le Velocity 05h (5). Seteishene se totobatsa mokhoa oa ho bonesa (static), Nomoro ea Nomoro eo pad e lokelang ho e khantša (e leng e ka tlase ho le letšehali ka mokhoa oa Session), Velocity ea 'mala (e leng Red, bona Palette ea Mobala).
Ho benya botala bo botala bo kaholimo ho le letšehali:
Host => Launchkey MK3:
Hex: 91h 60h 13h
Tšitoe: 145 96 19
Ena ke Note On, Channel 2, Note number 60h (96), le Velocity 13h (19). Channel e totobatsa mokhoa oa ho bonesa (ho benya), Nomoro ea Nomoro eo pad e lokelang ho e khantša (e leng e ka holimo ka ho le letšehali ka mokhoa oa Session), Velocity the color (e leng Green, bona Palette ea mebala).
Ho hula letlapa le ka tlase le letona le leputsoa:
Host => Launchkey MK3:
Hex: 92h 77h 2Dh
Tšitoe: 146 119 45
Ena ke Note On, Channel 3, Note number 77h (119), with Velocity 2Dh (45). Channel e totobatsa mokhoa oa ho bonesa (ho phunya), nomoro ea Note eo e tla khantša (e leng eona e ka tlaase ho le letona ka mokhoa oa Session), Velocity the color (e leng Blue, bona Palette ea Mobala).
Ho tima 'mala:
Host => Launchkey MK3:
Hex: 90h 77h 00h
Tšitoe: 144 119 0
Ena ke Note Off (Hlokomela ka Velocity of zero), Channel 1, Nomoro ea Nomoro 77h (119), ka Velocity 00h (0). Seteishene se totobatsa mokhoa oa ho bonesa (static), Nomoro ea Nomoro eo pad e tla khantša (e leng eona e ka tlase ho le letona ka mokhoa oa Session), Velocity 'mala (o se nang letho, bona Palette ea Mobala). Haeba 'mala oa Pulsing o ne o behiloe moo ka molaetsa o fetileng, sena se ne se tla o tima. Ntle le moo, molaetsa oa Midi Note Off o ka sebelisoa bakeng sa phello e tšoanang:
Host => Launchkey MK3:
Hex: 80h 77h 00h
Tšitoe: 128 119 0

Ho laola skrine

Ka mokhoa oa DAW skrine ea LCD ea Launchkey MK3's 16×2 le eona e ka laoloa ho etsa hore e bontše boleng bo itseng.
Ho na le lintho tse tharo tse tlang pele tse sebelisoang ke Launchkey MK3, ho bohlokoa ho utloisisa ho tseba hore na molaetsa o mong le o mong o tla theha eng:

• Pontšo ea kamehla, eo hangata e se nang letho, 'me e na le maemo a tlase haholo.
• Pontšo ea nakoana, e bonts'ang metsotsoana ea 5 ka mor'a ho sebelisana le taolo.
•  Pontšo ea li-menu, e nang le bohlokoa bo holimo.
  Ha o sebelisa o mong oa melaetsa e sehlopheng sena, data e tla behoa ke Launchkey MK3 'me e tla hlahisoa neng kapa neng ha pontšo e tsamaellanang e tlameha ho bontšoa. Ho romella molaetsa ho Launchkey MK3 ho ke ke ha fetola ponts'o hang hang haeba ponts'o e holimo e bonts'oa ka nako eo (bakeng sa mohlala.ample haeba Launchkey MK3 e le lethathamong la eona la Litlhophiso), empa e tla bonts'a hang ha lits'oants'o tsa mantlha li tlositsoe (bakeng sa mohlala.ample ka ho tsoa ho menu ea Litlhophiso).
  Khouto ea litlhaku
  Li-byte tsa melaetsa ea SysEx e laolang skrine li hlalosoa ka tsela e latelang:
• 00h (0) - 1Fh (31): Laola litlhaku, sheba ka tlase.
•  20h (32) - 7Eh (126): litlhaku tsa ASCII.
• 7Fh (127): Sebopeho sa taolo, ha sea lokela ho sebelisoa.
  Har'a litlhaku tsa taolo, tse latelang li hlalosoa:
• 11h (17): ISO-8859-2 sebapali sa banka se kaholimo ho baiti e latelang.
  Litlhaku tse ling tsa taolo ha lia lokela ho sebelisoa kaha boitšoaro ba bona bo ka fetoha nakong e tlang.
  Khoutu ea sebopeho sa banka e holimo ea ISO-8859-2 e ka fumanoa ka ho eketsa 80h (128) ho boleng ba byte. Ha se litlhaku tsohle tse kenngoeng tšebetsong, empa kaofela li na le 'mapa o hlakileng oa sebopeho se ts'oanang moo se sa etsoang. Haholo-holo letšoao la degree (B0h ho ISO-8859-2) le kentsoe tšebetsong.
  Seta pontsho ya kamehla
  Pontšo ea kamehla e ka hlophisoa ke SysEx e latelang:
  Host => Launchkey MK3:
  Hex: Tšitoe: F0h 00h 20h 29h 02h 0Fh 04h [ […]] F7h 240 0 32 41 2 15 4 [ […]] 247
  Ho romella molaetsa ona ho hlakola pontšo ea nakoana haeba e ntse e sebetsa ka nako eo.
  Mola o na le libaka (litlhaku tse se nang letho) ho ea qetellong ea tsona haeba tatellano ea litlhaku e le khutšoanyane ho feta litlhaku tse 16. Litlhaku tse feteletseng li hlokomolohuoa haeba e le telele.
  Ho tsoa ka mokhoa oa DAW ho hlakola pontšo ea kamehla.

Hlakola pontsho ya kamehla

Pontšo ea kamehla e behiloeng ka holimo e ka hlakisoa ke SysEx e latelang:
Host => Launchkey MK3:
Hex: Dec: F0h 00h 20h 29h 02h 0Fh 06h F7h 240 0 32 41 2 15 6 247
Ho khothaletsoa ho sebelisa molaetsa ona ho fapana le ho hlakola ponts'o ka Seta molaetsa oa ponts'o ea kamehla kaha molaetsa ona o boetse o o supa ho Launchkey MK3 hore DAW e tlohela taolo ea ponts'o ea kamehla.
Beha lebitso la paramethara
Mefuta ea DAW Pot le Fader e ka fumana mabitso a ikhethileng ho bonts'a taolo e 'ngoe le e' ngoe e sebelisa SysEx e latelang:
Host => Launchkey MK3:
Hex: Dec: F0h 00h 20h 29h 02h 0Fh 07h [ […]] F7h 240 0 32 41 2 15 7 [ […]] 247
The parameter e shebahala tjena:

• 38h (56) - 3Fh (63): Lipitsa
•  50h (80) - 58h (88): Faders

Mabitso ana a sebelisoa ha taolo e sebelisana le eona, e bonts'a pontšo ea nakoana, moo ba lulang teng ka holimo. Ho romella SysEx ena ha ponts'o ea nakoana e ntse e sebetsa ho na le phello hang hang (lebitso le ka ntlafatsoa "ka fofa") ntle le ho eketsa nako ea pontšo ea nakoana.
Beha boleng ba paramethara
Mefuta ea DAW Pot le Fader e ka fumana litekanyetso tse ikhethileng tsa paramente ho bonts'a taolo e 'ngoe le e' ngoe e sebelisa SysEx e latelang:
Host => Launchkey MK3:
Hex: Dec: F0h 00h 20h 29h 02h 0Fh 08h [ […]] F7h 240 0 32 41 2 15 8 [ […]] 247
The parameter e shebahala tjena:

• 38h (56) - 3Fh (63): Lipitsa
•  50h (80) - 58h (88): Faders

Likhoele tsena tsa boleng ba parameter (li ka ba tse hanyetsanang) li sebelisoa ha taolo e sebelisana le eona, e bonts'a pontšo ea nakoana, moo e lulang teng ka tlase. Ho romella SysEx ena ha ponts'o ea nakoana e ntse e sebetsa ho na le phello e potlakileng (boleng bo ka ntlafatsoa "ka fofa") ntle le ho eketsa nako ea pontšo ea nakoana.
Haeba molaetsa ona o sa sebelisoe, ponts'o ea boleng ba paramethara ea kamehla ea 0 - 127 e fanoa ke Launchkey MK3.

Ho laola likarolo tsa Launchkey MK3

Tse ling tsa likarolo tsa Launchkey MK3 li ka laoloa ke melaetsa ea MIDI. Mesebetsi eohle e hlalositsoeng khaolong ena e fumaneha ka LKMK3 DAW In / Out (USB) feela.

Mohlahlobi

Arpeggiator e ka laoloa ke liketsahalo tsa Control Change ho Channel 1 (boemo ba Midi: B0h, 176) ho li-indices tse latelang:

• 6Eh (110): Arpeggiator Buletse (Boleng ba Nonzero) / Off (Boleng ba Zero).
• 55h (85): Mofuta oa Arp. Lethathamo la boleng: 0 - 6, bona ka tlase.
• 56h (86): Sekhahla sa Arp. Lethathamo la boleng: 0 - 7, bona ka tlase.
•  57h (87): Arp octave. Lethathamo la boleng: 0 - 3, e tsamaellanang le lipalo tsa octave 1 - 4.
• 58h (88): Arp latch On (Boleng ba Nonzero) / Off (Boleng ba Zero).
•  59h (89): Arp heke. Boleng ba boleng: 0 - 63h (99), e tsamaellanang le bolelele ba 0% - 198%.
•  5Ah (90): Arp swing. Lethathamo la boleng: 22h (34) - 5Eh (94), e lumellanang le li-swings -47% - 47%.
• 5Bh (91): Moribo oa Arp. Lethathamo la boleng: 0 - 4, bona ka tlase.
• 5Ch (92): Arp mutate. Lethathamo la boleng: 0 - 127.
• 5Dh (93): Arp e kheloha. Lethathamo la boleng: 0 - 127.

Mefuta ea Arp:

• 0:1/4
• 1: 1/4 Litharo-tharo
•  2:1/8
•  3: 1/8 Litharo-tharo
• 4:1/16
•  5: 1/16 Litharo-tharo
• 6:1/32
•  7: 1/32 Litharo-tharo

Litekanyetso tsa morethetho oa Arp:

• 0: Hlokomela
• 1: Ela hloko – Emisa – Ela hloko
• 2: Hlokomela - Emisa - Khutsa - Ela hloko
• 3: Ka tšohanyetso
• 4: Fapoha

Sekala sa boemo

Scale mode e ka laoloa ke liketsahalo tsa Control Change ho Channel 16 (boemo ba Midi: BFh, 191) ka li-indices tse latelang:

• 0Eh (14): Boemo ba sekala Butse (Boleng ba Nonzero) / Off (Boleng ba Zero).
• 0Fh (15): Mofuta oa sekala. Lethathamo la boleng: 0 - 7, bona ka tlase.
• 10h (16): Senotlolo sa Scale (motso molaetsa). Lethathamo la boleng: 0 - 11, ho fetela holimo ka li-semitones.

Mefuta ea sekala:

• 0: tse nyane
• 1: Tse kholo
• 2: Dorian
• 3: Mixolydian
•  4: Sefrigia
•  5: Harmonic e nyane
• 6: Pentatonic e nyane
• 7: Pentatonic e kholo

Melaetsa ea tlhophiso Curve ea Velocity

Molaetsa ona o hlophisa lebelo la Velocity la Linotlolo le Liphase, tseo hangata li fumanehang ho Litlhophiso tsa menyu:
Host => Launchkey MK3:
Hex: Dec: F0h 00h 20h 29h 02h 0Fh 02h F7h 240 0 32 41 2 15 2 247
The e hlalosa hore na ke karolo efe e lokelang ho seta lebelo la lebelo bakeng sa:

• 0: Linotlolo
•  1: Lipapali

Bakeng sa , tse latelang lia fumaneha:

• 0: E bonolo (Ho bapala lintlha tse bonolo ho bonolo).
• 1: Mahareng.
•  2: Ho thata (Ho bapala lintlha tse thata ho bonolo).
•  3: Lebelo le tsitsitseng.

Animation ea ho qala

Animation ea Launchkey MK3's Startup e ka fetoloa ke SysEx e latelang:
Host => Launchkey MK3:
Hex: Tšitoe: F0h 00h 20h 29h 02h 0Fh 78h [ […]] F7h 240 0 32 41 2 15 120 [ […]] 247

The byte e totobatsa nako ho li-units tse 2 tsa millisecond bakeng sa ho ntšetsa pele pad e le 'ngoe ho ea ka ho le letona le holimo.
The field ke triplet ea likaroloana tse Khubelu, Botala le Botala (0 - 127 mefuta e 'ngoe le e' ngoe), e totobatsang 'mala oo o lokelang ho kena ho oona mohatong o latelang. Animation e kenyellelitsoe hantle lipakeng tsa mehato. Ho ka eketsoa mehato e fihlang ho 56, mehato e meng e hlokomolohuoa.
Ha o fumana molaetsa ona, Launchkey MK3 e tsamaisa animation ea ho qala (ntle le ho qala bocha), kahoo sephetho se ka bonoa hanghang.
Molaetsa o latelang oa SysEx o kenyelletsa animation ea mantlha ea Qalo:
Host => Launchkey MK3:

Litokomane / Lisebelisoa

LAUNCHKEY MK3 25-Linotlolo tsa USB MIDI Keyboard Controller [pdf] Buka ea Taelo MK3, 25-Key USB MIDI Keyboard Controller, MK3 25-Key USB MIDI Keyboard Controller, MIDI Keyboard Controller, Keyboard Controller, Controller

Litšupiso

• Bukana ea Mosebelisi