invt IVC1S Series Micro Programmable Logic Controller
IVC1S Series DC Power PLC Ka potlako
Bukana ena ea ho qala ka potlako ke ho u fa tataiso e potlakileng mabapi le moralo, ho kenya, ho hokahanya le ho hlokomela IVC1S series PLC, e loketseng bakeng sa litšupiso tsa sebaka sa marang-rang. Ka bokhuts'oanyane bukana ena ke lintlha tsa hardware, likarolo, le ts'ebeliso ea IVC1S series PLC, hammoho le likarolo tseo u ka li khethang le FAQ bakeng sa referense ea hau. Bakeng sa ho odara libukana tse ka holimo tsa basebelisi, ikopanye le mophatlalatsi oa INVT kapa ofisi ea thekiso.
Selelekela
Tlhaloso ea Mohlala
Tlhaloso ea mohlala e bontšoa setšoantšong se latelang.
Ho Bareki:
Rea leboha ka ho khetha lihlahisoa tsa rona. Ho ntlafatsa sehlahiswa le ho fana ka tshebeletso e ntlafetseng bakeng sa hao, na ka kopo o ka tlatsa foromo ka mora hore sehlahiswa se sebetswe kgwedi e le 1, mme o romelle poso kapa fekse ii Setsing sa rona sa Ditshebeletso tsa Bareki? Re tla u romella sehopotso se setle ha u fumana Foromo e felletseng ea Maikutlo a Boleng ba Sehlahisoa. Ho feta moo, haeba u ka re fa likeletso mabapi le ho ntlafatsa sehlahisoa le boleng ba litšebeletso, u tla fuoa mpho e khethehileng. Ke leboha haholo!
Shenzhen INVT Electric Co., Lid.
Foromo ea Maikutlo a Boleng ba Sehlahisoa
| Lebitso la moreki | Tele | ||
| Aterese | K'houtu ea sebaka | ||
| Mohlala | Letsatsi la tšebeliso | ||
| Mochini SN | |||
| Ponahalo kapa sebopeho | |||
| Tshebetso | |||
| Sephutheloana | |||
| Lintho tse bonahalang | |||
| Bothata ba boleng nakong ea tšebeliso | |||
| Tlhahiso mabapi le ntlafatso | |||
Aterese: INVT Guangming Technology Building, Songbai Road, Matian, Setereke sa Guangming, Shenzhen, China Tel: +86 23535967
Kemiso
Kemiso ea mojule oa motheo e bontšoa setšoantšong se latelang ka ho nka exampSetšoantšo sa IVC1S-1614MDR
PORTO le PORT1 ke liteishene tsa puisano. PORTO e sebelisa mokhoa oa RS232 o nang le sokete ea Mini DINS. PORT1 e na le RS485. Phetoho ea khetho ea mokhoa e na le maemo a mabeli: ON le TIMA.
Selelekela sa Terminal
Litlhophiso tsa li-terminals tsa lintlha tse fapaneng tse 110 li bonts'itsoe ka tlase:
- 14-ntlha, 16-ntlha, 24-ntlha
Theminale ea ho kenya:
Theminale ea lihlahisoa:
- 30-ntlha
Theminale ea ho kenya:
Theminale ea lihlahisoa: 
- 40-ntlha
Theminale ea ho kenya:
Theminale ea lihlahisoa: 
- 60-ntlha
Theminale ea ho kenya:
Theminale ea lihlahisoa: 
- 48-ntlha
Theminale ea ho kenya:
Theminale ea lihlahisoa: 
Phepelo ea motlakase
Litlhaloso tsa matla a hahiloeng ka PLC le matla a li-module tsa katoloso li thathamisitsoe tafoleng e latelang.
| Ntho | Hlokomela | |||||
| Phepelo ea motlakase voltage | Vdc | 19 | 24 | 30 | Ho qala le ts'ebetso e tloaelehileng | |
| Kenya hona joale | A | 0.85 | Kenyelletso: 24Vdc, tlhahiso ea 100%. | |||
| 5 V/GND | mA | 600 | Kakaretso ea matla a lihlahisoa 5V/GND le 24V/GND s 15W. Max. matla a tlhahiso: 15W (kakaretso ea makala ohle) Tlhahiso: ha ho tlhahiso ea 24V. |
|||
| Sephetho sa 24V/GND | mA | 500 | ||||
| jwale | ||||||
Digital Inputs & Outputs
Kenyelletso Sebopeho le Tlhaloso
Litšobotsi tsa ho kenya le litlhaloso li bontšoa ka tsela e latelang:
| Ntho | Ho kenya ka lebelo le phahameng I Theminale ea ho kenya ka kakaretso liteishene X0-X7 | |
| Mokhoa oa ho kenya | Mokhoa oa mohloli kapa mokhoa oa sink, o behiloeng ka har'a sis terminal | |
| Keletso voltage | 24Vdc | |
| Kenya 4kO I4k0 impedanceInput ON External circuit resistance <4000 Input OFF Ho hanyetsa potoloho ea kantle>24kO Filter ea dijithale X0-X7 e na le ts'ebetso ea ho sefa ea dijithale. Nako ea ho sefa: o, Ho sefa g 8 , 16, 32 kapa 64ms (e khethiloe ka lenaneo la mosebedisi) |
||
| tshebetso | Li-terminal Input tse ling ntle le XO - X7 ke tsa ho sefa sefa sa hardware. Nako ea ho sefa: hoo e ka bang 10ms | |
|
|
|
Terminal ea ho kenya e sebetsa joalo ka khaontara e na le moeli ho feta maqhubu a phahameng. Maqhubu afe kapa afe a phahameng ho feta ao a ka baka palo e fosahetseng kapa ts'ebetso e sa tloaelehang ea sistimi. Etsa bonnete ba hore tlhophiso ea li-terminal tsa ho kenya lia utloahala 'me li-sensor tsa kantle tse sebelisoang li nepahetse.
Khokahano ea ho kenya example
Setšoantšo se latelang se bontša example ea IVC1S-1614MDR, e hlokomelang taolo e bonolo ea ho beha maemo. Lipontšo tsa boemo bo tsoang ho PG li kenngoa ka li-terminals tsa ho bala ka lebelo le phahameng XO le X1, li-switch switch tsa moeli tse hlokang karabelo ea lebelo le phahameng li ka kenngoa ka li-terminals tsa lebelo le phahameng X2 - X7. Lipontšo tse ling tsa basebelisi li ka kenngoa ka li-terminals life kapa life tse ling.
Sebopeho sa Output Le Tlhaloso
Tafole e latelang e bonts'a tlhahiso ea relay le tlhahiso ea transistor.
| Ntho | Tlhahiso ea relay | Sephetho sa Transistor | |
| Mokhoa oa ho tsoa | Ha boemo ba tlhahiso bo ON, potoloho e koetsoe; TIMA, bula | ||
| Terminal e tloaelehileng | E arotsoe ka lihlopha tse ngata, se seng le se seng se na le terminal e tloaelehileng ea Comm, e loketseng lipotoloho tsa taolo tse nang le menyetla e fapaneng. Li-terminals tsohle tse tloaelehileng li arotsoe ho tse ling | ||
| Moqtage | 220Vac · 24Vdc ha ho tlhokahalo ea polarity | 24Vdc, ho hlokahala polarity e nepahetseng | |
| Hona joale | Ho lumellana le lintlha tsa motlakase tse hlahisoang (sheba Letlapa le latelang) | ||
| Phapang | Ho khanna ka matlatage, matla a maholo | Nako ea ho khanna e nyenyane, maqhubu a phahameng, nako e telele ea bophelo | |
| Kopo | Meroalo e nang le maqhubu a tlase a ts'ebetso joalo ka relay e mahareng, coil ea khokahanyo, le li-LED | Meroalo e nang le maqhubu a phahameng le bophelo bo bolelele, joalo ka servo ea taolo ampLifier le electromagnet ketso eo khafetsa | |
Lintlha tsa motlakase tsa lihlahisoa li bontšoa tafoleng e latelang.
| Ntho | Relay output terminal | Transistor output terminal | ||
| Fetola voltage | Ka tlase ho 250Vac, 30Vdc 5-24Vdc | |||
| Ho itšehla thajana ho potoloha | Ka Relay | PhotoCoupler | ||
| Letšoao la ts'ebetso | Mabitso a relay a koetsoe, LED e buletsoe | LED e teng ha optical coupler e tsamaisoa | ||
| Leakage current ea potoloho e bulehileng | Ka tlase ho 0.1mA/30Vdc | |||
| Moroalo o fokolang | 2mA/5Vdc | 5mA (5-24Vdc) | ||
| Max tlhahiso ea hajoale | Mojaro o hanyetsanang | 2A/1 ntlha; 8A/4 lintlha, ho sebelisa COM 8A/8 lintlha, ho sebelisa COM |
Y0/Y1: 0.3A/1 ntlha. Tse ling: ntlha ea 0.3A/1, ntlha ea 0.8A/4, ntlha ea 1.2A/6, ntlha ea 1.6A/8. Ka holim'a lintlha tse 8, kakaretso ea hona joale e eketsa 0.1A ntlheng e 'ngoe le e 'ngoe | |
| Moroalo o matla | 220Vac, 80VA | Y0/Y1: 7.2W/24Vdc
Tse ling: 12W/24Vdc |
||
| Mojaro oa khanya | 220Vac, 100W | Y0/Y1: 0.9W/24Vdc
Tse ling: 1.5W/24Vdc |
||
| Nako ea ho arabela | TIMA-> ON | 20ms Max | Y0/Y1: 10us Ba bang: 0.5ms | |
| QN-, QFF | 20ms Max | |||
| YO, Y1 max. sekhahla sa tlhahiso | Channel ka 'ngoe: 100kHz | |||
| Theminale e tloaelehileng ea tlhahiso | YO/ Y1-COM0; Y2/Y3-COM1. Ka mor'a Y4, li-terminals tsa Max 8 li sebelisa terminal e le 'ngoe e tloaelehileng | |||
| Tšireletso ea fuse | Che | |||
Khokahano ea lintho example
Setšoantšo se latelang se bontša exampSetšoantšo sa IVC1S-1614MDR Lihlopha tse fapaneng tse hlahisoang li ka hokahana le li-circuits tse fapaneng tse nang le voltages. Tse ling (joaloka YO-COMO) li hokahane le potoloho ea 24Vdc e tsamaisoang ke 24V-COM ea lehae, tse ling (joaloka Y2-COM1) li hokahantsoe le 5Vdc low vol.tage, le tse ling (joaloka Y4-Y7) li hokahane le 220Vac voltage pontšo ea potoloho.
Boema-kepe ba Khokahano
IVC1S series PLC module ea motheo e na le likou tse tharo tsa serial asynchronous communication: PORTO le PORT1.
Litefiso tsa baud tse tšehetsoeng:
- 115200 bps
9600 bps - 57600 bps
4800 bps - 38400 bps
2400 bps - 19200 bps
1200 bps
E le setsi se inehetseng ho lenaneo la basebelisi, PORTO e ka fetoloa ho protocol ea lenaneo ka sesebelisoa sa khetho ea mokhoa. Kamano pakeng tsa boemo ba ts'ebetso ea PLC le protocol e sebelisoang ke PORTO e bontšoa tafoleng e latelang.
| Mokhoa khethoI switjha boemo | boemo | PORTO protocol ea ts'ebetso |
| ON
TLOA |
Ho matha
Ema |
Protocol ea lenaneo, kapa protocol ea Modbus, kapa protocol ea mahala-port, kapa N: N protocol ea marang-rang, joalo ka ha ho khethoa ke lenaneo la mosebelisi le tlhophiso ea sistimi
E fetoletsoe ho protocol ea lenaneo |
POTSO1 e loketse bakeng sa ho hokahanya le lisebelisoa tse khonang ho buisana (joalo ka li-inverters). Ka protocol ea Modbus kapa RS485 terminal mahala protocol, ii ka laola lisebelisoa tse ngata ka marang-rang. Li-terminals tsa eona li tsitsitsoe ka li-screw. U ka sebelisa sekoahelo se sirelelitsoeng e le thapo ea lets'oao ho hokela likou tsa puisano u le mong.
Ho kenya
PLC e sebetsa ho Mokhahlelo oa II oa Tlhophiso, tekanyo ea Pollution 2.
Litekanyo tsa ho kenya
| Mohlala | Bolelele | Bophara | Bophahamo | Boima ba 'mele |
| IVC1S-0806MDR, Tlhaloso: IVC1S-0806MDT |
135 limilimithara | 90 limilimithara | 1.2 limilimithara | 440g |
| Tlhaloso: IVC1S-1006MDR, IVC1S-1006MDT | 440g | |||
| Tlhaloso: IVC1S-1208MDR , IVC1S-1208MDT | 455g | |||
| IVC1S-1410MDR,
Tlhaloso: IVC1S-1410MDT |
470g | |||
| Tlhaloso: IVC1S-1614MDR, IVC1S-1614MDT | 150 limilimithara | 90 limilimithara | 71.2 limilimithara | 650g |
| Tlhaloso: IVC1S-2416MDR, IVC1S-2416MDT | 182 limilimithara | 90 limilimithara | 71.2 limilimithara | 750g |
| Tlhaloso: IVC1S-3624MDR, IVC1S-3624MDT | 224.5 limilimithara | 90 limilimithara | 71.2 limilimithara | 950g |
| IVC1S-2424MDR, Tlhaloso: IVC1S-2424MDT |
224.5 limilimithara | 90 limilimithara | 71.2 limilimithara | 950g |
Mokhoa oa ho kenya
Ho hloa seporo sa DIN
Ka kakaretso o ka hloella PLC holim'a seporo sa 35mm-wide (DIN), joalo ka ha ho bonts'itsoe setšoantšong se latelang.
Ho lokisa screw
Ho lokisa PLC ka li-screw ho ka ts'oara ho feta ho ts'oaroa ha seporo sa DIN. Sebelisa li-screws tsa M3 ka masoba a kentsoeng sebakeng sa PLC ho lokisa PLC ka mokokotlong oa khabinete ea motlakase, joalo ka ha ho bonts'itsoe setšoantšong se latelang. 
Khokahano ea Cable le Tlhaloso
Ho hokela thapo ea motlakase le thapo ea fatše
Khokahano ea matla a DC e bontšoa setšoantšong se latelang.
Re khothaletsa hore u kenye sekhechana sa tšireletso sebakeng sa phepelo ea motlakase. Sheba setšoantšo se ka tlase.
Hokela terminal ea PLC @ ho electrode ea fatše. Ho etsa bonnete ba hore khokahanyo ea cable ea fatše e ka tšeptjoang, e etsang hore thepa e sireletsehe le ho e sireletsa ho EM I. sebelisa cable ea AWG12-16, 'me u etse hore mohala o be khutšoanyane ka hohle kamoo ho ka khonehang. Sebelisa motheo o ikemetseng. Qoba ho arolelana tsela le thapo ea motheo ea lisebelisoa tse ling (haholo-holo tse nang le EMI} e matla. Sheba setšoantšo se latelang. 
Tlhaloso ea thapo
Ha o kenya PLC, sebelisa terata ea koporo e nang le likhoele tse ngata le liteishene tse entsoeng ka li-insulated ho netefatsa boleng. Mohlala o khothaletsoang le sebaka sa sefapano sa cable se bontšitsoe tafoleng e latelang.
|
Mohala |
Sebaka sa ho tšela | Moetso o khothalelitsoeng | Mokotla oa thapo le tube e fokotsang mocheso |
| thapo ya matla | 1.0-2.0mm' | AWG12, 18 | H1.5/14 sekoahelo se chitja se sirelelitsoeng, kapa sekoahelo sa thapo se tintsoeng |
| Mohala oa lefatše | 2.0mm' | AWG12 | H2.0/14 sekoahelo se chitja se sirelelitsoeng, kapa pheletso ea thapo e kentsoeng |
| thapo ya ho kenya (X) | 0.8-1.0mm' | AWG18, 20 | UT1-3 kapa OT1-3 solderless lug C13 kapa C!l4 mocheso shrinkable tube |
| Mohala oa lets'oao (Y) | 0.8-1.0mm' | AWG18, 20 |
Lokisa hlooho ea thapo e lokisitsoeng ho li-terminals tsa PLC ka li-screw. Torque e potlakileng: 0.5-0.8Nm.
Mokhoa o khothalletsoang oa ho sebetsa oa cable o bontšoa setšoantšong se latelang.
Ts'ebetso ea Matla le Tlhokomelo
E qalang
Hlahloba kgokelo ya thapo ka hloko. Etsa bonnete ba hore PLC e hlakile ka lintho tse sa tloaelehang le mocha oa ho senya mocheso o hlakile.
- Matla ho PLC, letšoao la PLC POWER le lokela ho ba teng.
- Qala software ea Auto Station ho moamoheli ebe u khoasolla lenaneo le hlophisitsoeng la mosebelisi ho PLC.
- Ka mor'a ho hlahloba lenaneo la ho jarolla, fetola phetoho ea khetho ea mokhoa ho ea boemong ba ON, letšoao la RUN le lokela ho ba teng. Haeba letšoao la ERR le ntse le le teng, lenaneo la mosebedisi kapa tsamaiso e fosahetse. Iketsetse lethathamong la IVC1S la PLC Programming Manual 'me u tlose phoso.
- Matla ho sistimi ea kantle ea PLC ho qala ho lokisa sistimi.
Tlhokomelo ea Kamehla Etsa se latelang:
- Netefatsa hore PLC e na le tikoloho e hloekileng. E sireletse ho basele le lerole.
- Boloka moea oa moea le mocheso oa PLC o le maemong a matle.
- Netefatsa hore likhokahano tsa lithapo li tšepahala ebile li maemong a matle. .
Tlhokomediso
- Le ka mohla u se ke ua hokahanya tlhahiso ea transistor ho potoloho ea AC (joaloka 220Vac). Moralo oa potoloho ea tlhahiso e tlameha ho latela litlhoko tsa li-parameter tsa motlakase, 'me ha ho na over-voltage kapa over-current e lumelloa.
- Sebelisa mabitso a li-relay ha ho hlokahala, hobane nako ea bophelo ea likhokahano tsa relay e itšetlehile haholo ka linako tsa ts'ebetso ea eona.
- Mabitso a relay a ka ts'ehetsa meroalo e menyane ho feta 2A. Ho ts'ehetsa meroalo e meholo, sebelisa likhokahano tsa kantle kapa li-mid-relay.
- Hlokomela hore khokahano ea relay e kanna ea hloleha ho koala ha hajoale e le nyane ho feta 5mA.
Hlokomela
- Lethathamo la tiisetso le fumaneha feela ho PLC.
- Nako ea tiisetso ke likhoeli tse 18, nakong eo INVT e tsamaisang tlhokomelo ea mahala le ho lokisa ho P maemo a tloaelehileng a ts'ebetso.
- Nako ea ho qala ea nako ea tiiso ke letsatsi la ho fana ka sehlahisoa, seo sehlahisoa sa SN e leng sona feela motheo oa kahlolo. PLC ntle le sehlahisoa SN e tla nkuoa e le ntle le waranti.
- Le nakong ea likhoeli tse 18, tlhokomelo le eona e tla lefisoa maemong a latelang:
Tšenyo e bakiloeng ke PLC ka lebaka la ts'ebetso e fosahetseng, e sa tsamaellaneng le Buka ea Mosebelisi;
Tšenyo e bakiloeng ke PLC ka lebaka la mollo, likhohola, matla a sa tloaelehangtage, joalo-joalo;
Tšenyo e bakiloeng ke PLC ka lebaka la tšebeliso e fosahetseng ea mesebetsi ea PLC. - Chelete ea litšebeletso e tla lefisoa ho latela litšenyehelo tsa sebele. Haeba ho na le konteraka leha e le efe, konteraka e ea hlōla.
- Ka kopo boloka pampiri ena 'me u bontše pampiri ena setsing sa tlhokomelo ha sehlahisoa se hloka ho lokisoa.
- Haeba u na le potso, ka kopo ikopanye le morekisi kapa k'hamphani ea rona ka kotloloho.
Shenzhen INVT Electric Co., Lid.
Aterese: INVT Guangming Technology Building, Songbai Road, Malian, Setereke sa Guangming, Shenzhen, Chaena
Websebaka: www.invt.com
Litokelo tsohle li sirelelitsoe. Likahare tsa tokomane ena li ka fetoha ntle le tsebiso.
Litokomane / Lisebelisoa
 |
invt IVC1S Series Micro Programmable Logic Controller [pdf] Bukana ea Mosebelisi IVC1S Series Micro Programmable Logic Controller, IVC1S Series, Micro Programmable Logic Controller, Programmable Logic Controller, Logic Controller, Controller |
