Litšobotsi
- Karolo e fetohang e nang le li-relay tse le 'ngoe / tse peli tse tsoang li sebelisoa ho laola lisebelisoa le mabone. Li-switches / likonopo tse hokahaneng le wiring li ka sebelisoa ho laola.
- Li ka kopanngoa le Li-Detectors, Controllers kapa iNELS RF Control System Components.
- The BOX version off e kenya ka ho toba lebokoseng la ho kenya, siling kapa sekoahelo sa sesebelisoa se laoloang. Ho kenya habonolo ka lebaka la li-terminals tse se nang screwless.
- E lumella ho hokahanya ha meroalo e fetotsoeng ka kakaretso ea 8 A (2000 W).
- Mesebetsi: bakeng sa RFSAI 61B-SL le RFSAI 62B-SL - pushbutton, impulse relay le mesebetsi ea nako ea ho lieha ho qala kapa ho khutla ka nako e behiloeng 2 s-60 min. Mosebetsi ofe kapa ofe o ka abeloa ho relay ka 'ngoe ea tlhahiso. Bakeng sa RFSAI-11B-SL, konopo e na le ts'ebetso e tsitsitseng - ON / OFF.
- Konopo ea kantle e abeloa ka tsela e ts'oanang le ea mohala.
- Sephetho se seng le se seng se ka laoloa ke liteishene tse fihlang ho 12/12 (1-channel e emela konopo e le 'ngoe ho molaoli). Ho fihla ho likanale tse 25 tsa RFSAI-61B-SL le RFSAI-11B-SL.
- Konopo ea lenaneo karolong e boetse e sebetsa e le taolo ea tlhahiso ea matsoho.
- Monyetla oa ho seta memori ea boemo ba tlhahiso ha ho ka etsahala hore o hlolehe le ho hlaphoheloa ha matla.
- Lintho tse pheta-phetoang li ka hlophisoa bakeng sa likarolo ka sesebelisoa sa tšebeletso sa RFAF / USB, PC, kopo.
- Ho fihla ho 200 m (ka ntle), haeba ho na le lets'oao le sa lekaneng lipakeng tsa molaoli le sesebelisoa, sebelisa RFRP-20 e pheta-phetoang kapa karolo e nang le protocol ea RFIO2 e tšehetsang tšebetso ena.
- Puisano le bidirectional RFIO2 protocol.
- Lisebelisoa tsa ho ikopanya tsa AgSnO2 relay li thusa ho fetola li-ballast tse khanyang.
Kopano
- ho kenya lebokoseng la ho kenya / (esita le tlas'a konopo e teng / switch)
- ho kenya sekoahelong sa kganya
- siling e phahamisitsoe
Khokahano
Li-terminals tse se nang lisebelisoa
Ho kenella ka maqhubu a seea-le-moea ka lisebelisoa tse fapaneng tsa kaho
Pontšo, taolo ea matsoho
- Konopo ea LED / PROG
- Botala ba LED V1 - sesupo sa boemo ba sesebelisoa bakeng sa tlhahiso ea 1
- LED e khubelu ea V2 - pontšo ea boemo ba sesebelisoa bakeng sa tlhahiso ea 2.
Lipontšo tsa ts'ebetso ea memori:- Butse - LED e panya ka x 3.
- E tima - LED e khantša hang ka nako e telele.
- Taolo ea matsoho e etsoa ka ho tobetsa konopo ea PROG bakeng sa <1s.
- Lenaneo le etsoa ka ho tobetsa konopo ea PROG bakeng sa 3-5s.
- Terminal block - khokahano bakeng sa konopo ea kantle
- Terminal block - ho kopanya mokhanni ea sa nke lehlakore
- Thibelo ea seteishene - khokahano ea mojaro le kakaretso ea kakaretso ea 8A ea hajoale (mohlala, V1=6A, V2=2A)
- Terminal block bakeng sa ho hokahanya mokhanni oa mohato
Lenaneong la lenaneo le ts'ebetso, LED ka karolo e khantša ka nako e le 'ngoe nako le nako ha konopo e hatelloa - sena se bontša taelo e kenang. RFSAI-61B-SL: lebitso le le leng la tlhahiso, pontšo ea boemo ka LED e khubelu
Ho lumellana
Sesebelisoa se ka kopanngoa le likarolo tsohle tsa tsamaiso, litsamaiso le lisebelisoa tsa iNELS RF Control le iNELS RF Control2. Sesebelisoa se ka abeloa protocol ea puisano ea iNELS RF Control2 (RFIO2).
Khetho ea mocha
Khetho ea mocha (RFSAI-62B-SL) e etsoa ka ho tobetsa likonopo tsa PROG bakeng sa 1-3s. RFSAI-61B-SL: tobetsa ho feta motsotsoana o le mong. Kamora ho lokolloa ha konopo, LED e ntse e benya e bonts'a mocha oa tlhahiso: khubelu (1) kapa e tala (1). Lipontšo tse ling kaofela li bontšoa ka 'mala o lumellanang oa LED bakeng sa mocha ka mong.
Tlhaloso ea konopo
Lebitso la tlhahiso le tla koaloa ka ho tobetsa konopo le ho buloa ka ho lokolla konopo. Bakeng sa phethahatso e nepahetseng ea litaelo tsa motho ka mong (tobetsa = ho koala / ho lokolla konopo = ho bula), nako ea ho lieha pakeng tsa litaelo tsena e tlameha ho ba metsotso e seng mekae. 1s (tobetsa - lieha 1s - lokolla).
Lenaneo
Phetoho ea tšebetso e buletsoe
Tlhaloso ea ho bulela
Lebitso la tlhahiso le tla koaloa ka ho tobetsa konopo.
Lenaneo
Ho tima mosebetsi
Tlhaloso ea ho tima
Lebitso la tlhahiso le tla buloa ka ho tobetsa konopo.
Lenaneo
Tobetsa konopo ea lenaneo ho moamoheli RFSAI-62B bakeng sa 3-5 s (RFSAI- 61B-SL: tobetsa ho feta 1 s) e tla kenya moamoheli RFSAI-62B mokhoeng oa lenaneo. LED e khanya ka nako ea 1s.
Phetiso ea ts'ebetso ea ts'ebetso
Tlhaloso ea "impulse relay".
Lebitso la sephetho le tla fetisetsoa sebakeng se fapaneng ka ho tobetsa e 'ngoe le e 'ngoe ea konopo. Haeba lebitso le ne le koetsoe, le tla buloa 'me ka tsela e fapaneng.
Lenaneo
Funcion e liehile ho tima
Tlhaloso ea ho lieha ho tima
Lebitso la tlhahiso le tla koaloa ka ho tobetsa konopo le ho buloa ka mor'a hore nako e behiloeng e fete.
Lenaneo
Mosebetsi o liehile ho tsoela pele
Tlhaloso ea morao-rao
Lebitso la tlhahiso le tla buloa ka ho tobetsa konopo le ho koaloa ka mor'a hore nako e behiloeng e fete.
Lenaneo
Lenaneo le nang le likarolo tsa taolo ea RF
Liaterese tse thathamisitsoeng ka lehlakoreng le ka pele la actuator li sebelisetsoa ho hlophisa le ho laola actuator le likanale tsa RF ka bomong ka likarolo tsa taolo.
Hlakola actuator
Ho phumula boemo bo le bong ba transmitter
Ka ho tobetsa konopo ea lenaneo ho actuator bakeng sa metsotsoana e 8 (RFSAI-61B-SL: tobetsa bakeng sa metsotsoana e 5), ho hlakoloa ha transmitter e le 'ngoe. LED e khantša 4x ka nako e 'ngoe le e' ngoe ea 1s. Ho tobetsa konopo e hlokahalang ho transmitter ho e hlakola mohopolong oa actuator. Ho netefatsa ho hlakoloa, LED e tla netefatsa ka khanya e telele mme karolo e khutlela mokhoeng oa ts'ebetso. Boemo ba memori ha bo bonngwe. Ho hlakolwa ha ho ame tshebetso ya memori e seng e setilwe.
Ho hlakola memori eohle
Ka ho tobetsa konopo ea lenaneo ho actuator bakeng sa metsotsoana e 11 (RFSAI-61B-SL: tobetsa bakeng sa metsotsoana e fetang 8), ho hlakoloa ho etsahala mohopolong oohle oa actuator. LED e khantša 4x ka nako e 'ngoe le e' ngoe ea 1s. The actuator e kena ka mokhoa oa ho etsa mananeo, LED e khantša ka linako tse ling tsa 0.5s (max. 4 min.). O ka khutlela mokhoeng oa ts'ebetso ka ho tobetsa konopo ea Prog ka tlase ho 1s. LED e khantša ho latela ts'ebetso ea memori e setiloe esale pele mme karolo e khutlela mokhoeng oa ts'ebetso. Ho hlakolwa ha ho ame tshebetso ya memori e seng e setilwe.
Ho kgetha tshebetso ya memori
Tobetsa konopo ea lenaneo ho moamoheli RFSAI-62B bakeng sa metsotsoana e 3-5 (RFSAI-61B-SL: tobetsa bakeng sa motsotsoana o le mong) e tla kenya moamoheli RFSAI-1B mokhoeng oa lenaneo. LED e khanya ka nako ea 62s.
Tobetsa konopo ea lenaneo ho moamoheli RFSAI-62B bakeng sa metsotsoana e 3-5 (RFSAI-61B-SL: tobetsa bakeng sa motsotsoana o le mong) e tla kenya moamoheli RFSAI-1B mokhoeng oa lenaneo. LED e khanya ka nako ea 62s.
- Mosebetsi oa memori ho:
- Bakeng sa mesebetsi ea 1-4, tsena li sebelisoa ho boloka boemo ba ho qetela ba tlhahiso ea phepelo pele ho phallo ea voltage marotholi, phetoho ea boemo ba tlhahiso ho mohopolong e tlalehiloe metsotsoana e 15 ka mor'a phetoho.
- Bakeng sa ts'ebetso ea 5-6, boemo bo reretsoeng ba relay bo kenngoa hang-hang mohopolong ka mor'a ho lieha, ka mor'a ho kopanya matla hape, relay e behiloe sebakeng se lebisitsoeng.
- Mosebetsi oa memori o tima:
Ha phepelo ea motlakase e hokahanngoa hape, relay e sala e tima.
Konopo ea kantle RFSAI-62B-SL e hlophisitsoe ka tsela e ts'oanang le ea mohala. RFSAI-11B-SL ha e hlophisitsoe, e na le ts'ebetso e tsitsitseng.
Litekanyetso tsa tekheniki
RFSAI-11B-SL RFSAI-61B-SL RFSAI-62B-SL
| Phepelo voltage: | 230 V AC | ||
| Phepelo voltage frequency: | 50-60 Hz | ||
| Kenyelletso e bonahalang: | 7 VA / cos φ = 0.1 | ||
| Matla a felisitsoeng: | 0.7 W | ||
| Phepelo voltagho mamellana: | + 10%; -15 % | ||
| Sephetho | |||
| Nomoro ea mabitso: | 1x switching / 1x kapcsoló | 2xswitching/2x kapcsoló8 | |
| E reiloe hajoale: | A / AC1 | ||
| Ho fetola matla: | 2000 VA / AC1 | ||
| Tlhōrō ea hona joale: | 10 A / <3 lets | ||
| Ho fetola voltage: | 250 V AC1 | ||
| Bophelo ba tšebeletso ea mechine: | 1x107 | ||
| Bophelo ba tšebeletso ea motlakase (AC1): | 1x105 | ||
| Taolo | |||
| Wireless: | Likanale tse 25/ 25 cstorna 2 x 12-channel/2×12 cstorna | ||
| Nomoro ea mesebetsi: | 1 | 6 | 6 |
| Protocol ea puisano: | RFIO2 | ||
| Hangata: | 866–922 MHz (bakeng sa lintlha tse ling bona leqephe la 74)/ 866–922 MHz (lásd a 74. oldalon) | ||
| Repeater mosebetsi: | yes/ Igen | ||
| Taolo ka letsoho: | konopo PROG (ON/OFF)/ PROG gomb (ON/OFF) | ||
| Konopo ea kantle / switjha: Range: | yes/ Igen | ||
| Lintlha tse ling | sebakeng se bulehileng ho fihlela ho 200 m/nyílt térben 200 m-ig | ||
| Thempereichara ea ho sebetsa: | |||
| Sebaka sa tšebetso: | -15 ho + 50 °C | ||
| Sebaka sa tšebetso: | any/ Bármi | ||
| Ho hlongoa: | mahala ka lithapo tsa lead-in/ laza a tápvezetékeken | ||
| Tshireletso: | IP40 | ||
| Ho tlolatagsehlopha sa e: | III. | ||
| Tekanyo ea tšoaetso: | 2 | ||
| Khokahano: | screwless terminals/ csavar nélküli bilincsek | ||
| Khokahano ea khokahanyo: | : 0.2-1.5 mm2 tiileng / flexible/ 0.2-1.5 limilimithara2 szilárd/rugalmas | ||
| Boholo: | 43 x 44 x 22 limilimithara | ||
| Boima ba 'mele: | 31g | 45 g | |
| Maemo a amanang: | EN 60730, EN 63044, EN 300 220, EN 301 489 | ||
Kenyelletso ea konopo ea taolo e sebakeng sa phepelotage ka khona.
Tlhokomeliso:
Ha o kenya sistimi ea Taolo ea iNELS RF, o tlameha ho boloka sebaka se fokolang sa 1 cm lipakeng tsa yuniti ka 'ngoe. Pakeng tsa litaelo tsa motho ka mong ho tlameha ho ba le nako ea bonyane 1s.
Tlhokomediso
Bukana ea litaelo e khethetsoe ho hlongoa hape bakeng sa mosebelisi oa sesebelisoa. E lula e le karolo ea ho paka. Ho kenya le ho hokahanya ho ka etsoa feela ke motho ea nang le mangolo a profeshenale a lekaneng ha a utloisisa bukana ena ea litaelo le mesebetsi ea sesebelisoa, le ha a ntse a boloka melao eohle e nepahetseng. Mosebetsi o se nang mathata oa sesebelisoa o boetse o itšetlehile ka lipalangoang, ho boloka le ho sebetsana. Haeba u hlokomela letšoao leha e le lefe la tšenyo, deformation, ho se sebetse kapa karolo e sieo, u se ke ua kenya sesebelisoa sena ebe u se khutlisetsa ho morekisi oa sona. Hoa hlokahala ho tšoara sehlahisoa sena le likarolo tsa sona e le litšila tsa elektronike ka mor'a hore bophelo ba sona bo fele. Pele o qala ho kenya, etsa bonnete ba hore lithapo tsohle, likarolo tse hokahaneng kapa li-terminals li feletsoe ke matla. Ha o ntse o hola le ho sebeletsa, hlokomela melaoana ea polokeho, litloaelo, litataiso le litsebi, le melaoana ea kantle ho naha bakeng sa ho sebetsa ka lisebelisoa tsa motlakase. Se ke oa ama likarolo tsa sesebelisoa tse matlafalitsoeng - tšokelo ea bophelo. Ka lebaka la ho fetisoa ha lets'oao la RF, sheba sebaka se nepahetseng sa likarolo tsa RF mohahong oo ho kengoang ho oona. RF Control e etselitsoe feela ho kenngoa ka hare ho hare. Lisebelisoa ha lia etsetsoa ho kenngoa ka ntle le libakeng tse mongobo. Ha ea lokela ho kenngoa ka har'a li-switchboards tsa tšepe le ka har'a li-switchboards tsa polasetiki tse nang le mamati a tšepe - phetiso ea lets'oao la RF ha e khonehe. RF Control ha e khothalletsoe bakeng sa li-pulleys joalo-joalo - letšoao la radiofrequency le ka sireletsoa ke ho thibela, ho sitisoa, betri ea transceiver e ka fofa joalo-joalo 'me kahoo e tima remote control.
ELKO EP e phatlalatsa hore mofuta oa RFSAI-xxB-SL oa thepa o lumellana le Litaelo tsa 2014/53/EU, 2011/65/EU, 2015/863/EU le 2014/35/EU. EU e felletseng
Declaration of Conformity e ho:
- https://www.elkoep.com/switching-units-with-inputs-for-external-buttons—-rfsai-11b-sl
- https://www.elkoep.com/switching-units-with-inputs-for-external-buttons—-rfsai-61b-sl
- https://www.elkoep.com/switching-units-with-inputs-for-external-buttons—rfsai-62b-sl
ELKO EP, sro, Palackého 493, 769 01 Holešov, Všetuly, Czech Republic
- Mohala.: +420 573 514 211
- lengolo-tsoibila: elko@elkoep.com
- www.elkoep.com
Litokomane / Lisebelisoa
 |
iNELS RFSAI-xB-SL Switch Unit e nang le Input For External Button [pdf] Bukana ea Mosebelisi RFSAI-62B-SL, RFSAI-61B-SL, RFSAI-11B-SL, RFSAI-xB-SL Switch Unit with Input For External Button, Fetola Yuniti ka Kenyeletso Bakeng sa Konopo ea Kantle, Kenyo Bakeng sa Konopo ea Kantle, Konopo ea kantle, Konopo |
