ICON PROCESS E LAOLANG TVF Series Flow Display Controller
Bala bukana ea mosebelisi ka hloko pele o qala ho sebelisa yuniti. Moetsi o na le tokelo ea ho kenya tšebetsong liphetoho ntle le tsebiso pele.
Tlhaloso ea Letšoao
Letšoao lena le bolela litataiso tsa bohlokoa haholo mabapi le ho kenya le ho sebetsa ha sesebelisoa. Ho se ikamahanye le litataiso tse boletsoeng ke letšoao lena ho ka baka kotsi, tšenyo kapa tšenyo ea lisebelisoa.
Litlhoko tsa Motheo
Tšireletseho ea Mosebelisi
- Se ke oa sebelisa yuniti libakeng tse sokeloa ke litšisinyeho tse feteletseng, ho thothomela, lerōle, mongobo, likhase tse senyang le oli.
- U se ke ua sebelisa yuniti libakeng tseo ho nang le kotsi ea ho phatloha.
- Se ke oa sebelisa yuniti libakeng tse nang le phapang e kholo ea mocheso, ho pepesehela condensation kapa leqhoa.
- Moetsi ha a ikarabelle bakeng sa tšenyo leha e le efe e bakoang ke ho kenngoa ka mokhoa o sa lokelang, ho se boloke maemo a nepahetseng a tikoloho le ho sebelisa yuniti e khahlanong le kabelo ea eona.
- Haeba tabeng ea ho se sebetse ha yuniti ho na le kotsi ea kotsi e tebileng ea ts'ireletso ea batho kapa thepa e eketsehileng, mekhoa e ikemetseng le tharollo ea ho thibela tšoso e joalo e tlameha ho sebelisoa.
- Sehlopha se sebelisa matla a kotsitage e ka bakang kotsi e bolaeang. Yuniti e tlameha ho tima le ho khaoloa phepelong ea motlakase pele e qala ho kenya tharollo ea mathata (haeba e sa sebetse hantle).
- Se ke oa leka ho qhaqholla, ho lokisa kapa ho fetola yuniti ka bouena. Yuniti ha e na likarolo tse ka sebelisoang ke mosebelisi.
- Diyuniti tse nang le bothata di tlameha ho kgaolwa mme di romelwe bakeng sa ditokiso setsing sa ditshebeletso se dumelletsweng
Litlhaloso
| Kakaretso | |
| Pontšo | LED | 6 Digithara | 13mm Phahameng | Khubelu | Khanya e Fetohang |
| Maemo a Bontshitsweng | 0 ~ 999999 |
| Phetiso ea RS485 | 1200…115200 bit/s, 8N1 / 8N2 |
| Thepa ea Matlo | ABS | Polycarbonate |
| Sehlopha sa Tšireletso | NEMA 4X | IP67 |
| Pontšo ea ho kenya | Phepelo | |
| Standard | Hona joale: 4-20mA | 0-20mA | 0-5V* | 0-10V* |
| Moqtage | 85 - 260V AC / DC | 16 - 35V AC, 19 - 50V DC* |
| Sephetho sa Letshwao | Phepelo | |
| Standard | 2 x Relays (5A) | 1 x Relay (5A) + 4-20mA |
| Puisano | RS485 |
| Moqtage | 24VDC |
| Sephetho sa hajoale * | 4-20mA | (Operating Range Max. 2.8 – 24mA) |
| Tshebetso | |
| Ho nepahala | 0.1% @ 25°C Dijiti e le 'ngoe |
| Mocheso | |
| Mocheso oa ho sebetsa | -40 - 158°F | -40 - 70°C |
Tlhaloso ea Phanele e ka Pele
Mosebetsi oa li-Buttons tsa Push
Litekanyo
Setšoantšo sa Wiring
TLOLO TLAMA
- Kenya screwdriver le push wire notlela mochini buloa
- Kenya terata
- Tlosa screwdriver
Ka lebaka la tšitiso e kholo e ka bang teng lits'ebetsong tsa indasteri, mehato e nepahetseng e netefatsang ts'ebetso e nepahetseng ea yuniti e tlameha ho sebelisoa.
Yuniti ha e na fuse e ka hare kapa sekhechana sa phepelo ea motlakase. Ka lebaka lena, ho tlameha ho sebelisoa fuse ea kantle ea tieho ea nako e nang le boleng bo bonyenyane ba hona joale (e khothalelitsoeng bipolar, max. 2A) le sekhechana sa phepelo ea motlakase se haufi le yuniti.
Khokahano
Phepelo ea Matla & Khokahano ea Relay
Mabitso a lihlahisoa tsa relay ha a na li-spark suppressors. Ha o sebelisa lihlahisoa tsa relay bakeng sa ho fetola meroalo ea inductive (likhoele, li-contactor, li-relays tsa motlakase, li-electromagnets, li-motors joalo-joalo) ho hlokahala hore u sebelise potoloho e eketsehileng ea khatello (hangata capacitor 47nF / min. 250VAC ka lihlopha tse nang le 100R / 5W resistor), e kopantsoeng. ka ho ts'oana le li-terminals tsa relay kapa (betere) ka kotloloho mojaro.
Khokahano ea Potoloho ea Khatello
OC-Type Output Connection
Khokahano ea Hona Joale ea Poelo e Sebelisang Phepelo ea Matla a ka Hare
Khokahano ea Hona Joale ea Poelo e Sebelisang Phepelo ea Matla a Ntle
Likhokahano tsa Metara ea Phallo (Mofuta oa Relay)
| TKM Series : 4-20mA Output | ||
| Seteishene sa TVF | Mobala oa Mohala | Tlhaloso |
| 7 | Boputsoa | - VDC |
| 8 | Brown | + VDC |
| 11 | Bosehla | mA+ |
| 12 | Hlooho | mA- |
| TKS Series : Pulse Output | ||
| GPM/Pulse = K factor | ||
| Seteishene sa TVF | Mobala oa Mohala | Tlhaloso |
| 7 | Boputsoa | - VDC |
| 8 | Brown | + VDC |
| 10 | Ntsho | NPN Pulse |
| Qhala 13 & 8 | ||
| TKW Series : Pulse Output | ||
| GPM/Pulse = K factor | ||
| Seteishene sa TVF | Mobala oa Mohala | Tlhaloso |
| 7 | Boputsoa | - VDC |
| 8 | Brown | + VDC |
| 10 | Ntsho | Pulse |
| Qhala 13 & 8 | ||
| TKW Series : 4-20mA Output | ||
| Seteishene sa TVF | Mobala oa Mohala | Tlhaloso |
| 7 | Boputsoa | - VDC |
| 8 | Brown | + VDC |
| 11 | Ntsho | mA+ |
| 12 | Bosoeu | mA- |
| TKP Series : Pulse Output | ||
| GPM/Pulse = K factor | ||
| Seteishene sa TVF | Mobala oa Mohala | Tlhaloso |
| 7 | Boputsoa | - VDC |
| 8 | Brown | + VDC |
| 10 | Ntsho | Pulse |
| Qhala 13 & 8 | ||
| Letoto la TIW: Pulse Output | ||
| GPM/Pulse = K factor | ||
| Seteishene sa TVF | Mobala oa Mohala | Tlhaloso |
| 7 | Boputsoa | - VDC |
| 8 | Brown | + VDC |
| 10 | Bosoeu | Pulse |
| Qhala 13 & 8 | ||
| TIM | KELETSO Series : Pulse Output | ||
| GPM/Pulse = K factor | ||
| Seteishene sa TVF | Mobala oa Mohala | Tlhaloso |
| 7 | Boputsoa | - VDC |
| 8 | Brown | + VDC |
| 10 | Ntsho | Pulse |
| Qhala 13 & 8 | ||
| Letoto la TIM : 4-20mA Output | ||
| Seteishene sa TVF | Mobala oa Mohala | Tlhaloso |
| 7 | Boputsoa | - VDC |
| 8 | Brown | + VDC |
| 11 | Bosehla | mA+ |
| 12 | Hlooho | mA- |
| UF 1000 | 4000 | 5000 - Pulse Output | ||
| GPM/Pulse = K factor | ||
| Seteishene sa TVF | Pin | Tlhaloso |
| 8 | 1 | + VDC |
| 10 | 2 | Pulse |
| 7 | 3 | - VDC |
| Qhala 13 & 8 | ||
| UF 1000 | 4000 | 5000 - 4-20mA Sephetho | ||
| Seteishene sa TVF | Pin | Tlhaloso |
| 8 | 1 | + VDC |
| 11 | 2 | +mA |
| 7 | 3 | - VDC |
| Qhala 12 & 7 | ||
| ProPulse (Flying lead) - Pulse Output | ||
| GPM/Pulse = K factor | ||
| Seteishene sa TVF | Mobala oa Mohala | Tlhaloso |
| 7 | Thebe | - VDC |
| 8 | Khubedu | + VDC |
| 10 | Boputsoa | Pulse |
| Qhala 13 & 8 | ||
| ProPulse®2 – Pulse Output | ||
| Seteishene sa TVF | Mobala oa Mohala | Tlhaloso |
| 7 | Boputsoa | - VDC |
| 8 | Brown | + VDC |
| 10 | Ntsho | Pulse |
| Qhala 13 & 8 | ||
Lenaneo la K Factor
Mananeo Relays
Lenaneo la Batching
Ho tsosolosa Batch
Ho tsosolosa Totalizer
Warranty, Returns le Meeli
Tiisetso
Icon Process Controls Ltd e fana ka tumello ho moreki oa pele oa lihlahisoa tsa eona hore lihlahisoa tse joalo li ke ke tsa lokoloha ho tsoa linthong tse bonahalang le ho etsoa tlas'a ts'ebeliso e tloaelehileng le ts'ebeletso ho latela litaelo tse fanoeng ke Icon Process Controls Ltd bakeng sa nako ea selemo ho tloha ka letsatsi la thekiso ea lihlahisoa tse joalo. Boitlamo ba Icon Process Controls Ltd tlasa waranti ena bo lekanyelitsoe feela ho lokisoeng kapa ho nkeng sebaka, ho khetho ea Icon Process Controls Ltd, ea lihlahisoa kapa likaroloana, tseo tlhahlobo ea Icon Process Controls Ltd e fanang ka tsona ka khotsofalo ea hore ha e na sekoli ho thepa kapa moetsong oa eona. nako ea tiisetso. Icon Process Controls Ltd e tlameha ho tsebisoa ho latela litaelo tse ka tlase mabapi le tleleime efe kapa efe tlas'a waranti ena nakong ea matsatsi a mashome a mararo (30) ka lebaka la ho haelloa ke tumellano ea sehlahisoa. Sehlahisoa sefe kapa sefe se lokisoang tlas'a tiisetso ena se tla tiisetsoa feela bakeng sa nako e setseng ea tiisetso ea pele. Sehlahisoa sefe kapa sefe se fanoang e le se seng tlas'a tiisetso ena se tla fuoa tumello bakeng sa selemo se le seng ho tloha letsatsing la phetoho.
E khutla
Lihlahisoa li ke ke tsa khutlisetsoa ho Icon Process Controls Ltd ntle le tumello ea pele. Ho khutlisa sehlahisoa seo ho nahanoang hore se na le phoso, e ea ho www.iconprocon.com, 'me u fane ka foromo ea kopo ea moreki (MRA) 'me u latele litaelo tse ho eona. Lihlahisoa tsohle tsa waranti le tseo e seng tsa waranti li khutlela ho Icon Process Controls Ltd li tlameha ho romelloa li lefshoa esale pele le ho fuoa inshorense. Icon Process Controls Ltd e ke ke ea ikarabella bakeng sa lihlahisoa life kapa life tse lahlehileng kapa tse senyehileng ka har'a thomello.
Mefokolo
Tiisetso ena ha e sebetse ho lihlahisoa tseo: 1) li fetang nako ea tiisetso kapa ke lihlahisoa tseo moreki oa mantlha a sa lateleng mekhoa ea tiisetso e boletsoeng ka holimo; 2) ba 'nile ba e-ba le tšenyo ea motlakase, ea mechine kapa ea lik'hemik'hale ka lebaka la tšebeliso e sa lokelang, ka phoso kapa ka bohlasoa; 3) li fetotsoe kapa li fetotsoe; 4) mang kapa mang ntle le basebeletsi ba litšebeletso ba lumelletsoeng ke Icon Process Controls Ltd ba lekile ho lokisa; 5) ba 'nile ba ameha likotsing kapa likoluoa tsa tlhaho; kapa 6) li senyehile nakong ea thomello e khutlisang ho Icon Process Controls Ltd e na le tokelo ea ho tlohela tiisetso ena ka bonngoe le ho lahla sehlahisoa sefe kapa sefe se khutliselitsoeng ho Icon Process Controls Ltd moo: 1) ho nang le bopaki ba ntho e ka bang kotsi e teng ka sehlahisoa; kapa 2) sehlahisoa se lutse se sa qosoe ho Icon Process Controls Ltd ka matsatsi a fetang 30 ka mor'a hore Icon Process Controls Ltd e kōpe ka boithatelo hore e sebelisoe. Tiisetso ena e na le waranti e le 'ngoe feela e hlahisoang ke Icon Process Controls Ltd mabapi le lihlahisoa tsa eona. LITIISETSO TSOHLE TSE EKETSEHILENG, HO kenyeletsoa ntle le MOEDI, LITIISETSO TSA HO REKA LE HO LOKELANG HO SEBELISA MAIKAO A KHETHEHILENG, LI HLAHISITSOE KA HO BONAHALA. Litlhare tsa tokiso kapa tse ncha joalo ka ha ho boletsoe ka holimo ke litlhare tse ikhethileng bakeng sa ho tlola tiisetso ena. HA HO TSOHLE Icon Process Controls Ltd E TLA BA MOLATO BAKENG SA LITšenyo life kapa life tse hlahileng kapa tse lahleloang ke mofuta ofe kapa ofe, HO kenyeletsoa thepa ea hau kapa ea SEBELE KAPA BAKENG SA MOTHO O MANG KAPA MANG. TIISETSO ENA E HLOMELA POLELO EA HO QETELA, E PHETHAHETSENG LE E KHETHEHILENG EA MELAO EA TIISETSO MME HA HO MOTHO EA DUMELLOTSOANG HO ETSA LITEKISO TSE LING KAPA TSE LING LEHAFENG LA Icon Process Controls Ltd. Tiisetso ena e tla hlalosoa ho latela melao ea Ontario, Canada. Haeba karolo leha e le efe ea tiisetso ena e nkoa e sa sebetse kapa e sa qobelloe ka lebaka leha e le lefe, ho fumana ho joalo ho ke ke ha etsa hore tokisetso e 'ngoe ea tiisetso ena e se ke ea sebetsa.
Bakeng sa litokomane tse eketsehileng tsa sehlahisoa le tšehetso ea tekheniki
- etela: www.iconprocon.com
- lengolo-tsoibila: sales@iconprocon.com
- or support@iconprocon.com
- Ph: 905.469.9283
Litokomane / Lisebelisoa
 |
ICON PROCESS E LAOLANG TVF Series Flow Display Controller [pdf] Bukana ea Mosebelisi TVF Series, TVF Series Flow Display Controller, Flow Display Controller, Display Controller, Controller |
