ICON HANYAR SAMUN SAUKI TVF
Karanta littafin jagorar mai amfani a hankali kafin fara amfani da naúrar. Mai samarwa yana da haƙƙin aiwatar da canje-canje ba tare da sanarwa ba.
Bayanin Alama
Wannan alamar tana nuna mahimman ƙa'idodi game da shigarwa da aiki na na'urar. Rashin bin ƙa'idodin da wannan alamar ke nunawa na iya haifar da haɗari, lalacewa ko lalata kayan aiki.
Abubuwan Bukatu na asali
Tsaron mai amfani
- Kada a yi amfani da naúrar a wuraren da ke da barazanar girgiza, girgiza, ƙura, zafi, iskar gas da mai.
- Kar a yi amfani da naúrar a wuraren da akwai haɗarin fashewa.
- Kada a yi amfani da naúrar a cikin wuraren da ke da mahimman bambancin zafin jiki, fallasa ga maƙarƙashiya ko kankara.
- Mai sana'anta ba shi da alhakin duk wani lahani da ya haifar ta hanyar shigar da bai dace ba, rashin kiyaye yanayin muhalli da ya dace da amfani da naúrar sabanin aikin sa.
- Idan a cikin yanayin rashin aiki na naúrar akwai haɗarin mummunar barazana ga amincin mutane ko ƙarin dukiya, dole ne a yi amfani da tsare-tsare masu zaman kansu da mafita don hana irin wannan barazanar.
- Naúrar tana amfani da voltage wanda zai iya haifar da haɗari mai mutuwa. Dole ne a kashe naúrar kuma a cire haɗin daga wutar lantarki kafin a fara shigar da matsala (cikin yanayin rashin aiki).
- Kada kayi ƙoƙarin ƙwace, gyara ko gyara naúrar da kanka. Naúrar ba ta da sassan da za a iya amfani da ita.
- Dole ne a cire haɗin da ba daidai ba kuma a ƙaddamar da shi don gyarawa a cibiyar sabis mai izini
Ƙayyadaddun bayanai
| Gabaɗaya | |
| Nunawa | LED | lamba 6 | 13mm High | ja | Daidaitacce Haske |
| Ƙimar da aka Nuna | 0 ~ 999999 |
| Saukewa: RS485 | 1200…115200 bit/s, 8N1/8N2 |
| Kayan Gida | ABS | Polycarbonate |
| Class Kariya | NEMA 4X | IP67 |
| Alamar shigowa | wadata | |
| Daidaitawa | Yanzu: 4-20mA | 0-20mA | 0-5V* | 0-10V* |
| Voltage | 85 - 260V AC / DC | 16-35V AC, 19-50V DC* |
| Siginar fitarwa | wadata | |
| Daidaitawa | 2 x Relays (5A) | 1 x Relay (5A) + 4-20mA |
| Sadarwa | Saukewa: RS485 |
| Voltage | Saukewa: 24VDC |
| Fitowar halin yanzu mai wucewa * | 4-20mA | (Maxaunin Aiki. 2.8 - 24mA) |
| Ayyuka | |
| Daidaito | 0.1% @ 25°C Lambobi ɗaya |
| Yanayin zafi | |
| Yanayin Aiki | -40 - 158°F | -40 - 70 ° C |
Bayanin Kwamitin Gaba
Ayyukan Maɓallin Tura
Girma
Tsarin Waya
GASKIYAR WIRE
- Saka screwdriver da tura hanyar kulle waya a buɗe
- Saka waya
- Cire screwdriver
Saboda yiwuwar tsangwama mai mahimmanci a cikin masana'antu, dole ne a yi amfani da matakan da suka dace waɗanda ke tabbatar da aikin naúrar daidai.
Naúrar ba a sanye take da fiusi na ciki ko na'urar wutar lantarki. Don haka, dole ne a yi amfani da fis ɗin yanke-lokacin jinkiri na waje tare da ƙaramin ƙima na yanzu (wanda aka ba da shawarar bipolar, max. 2A) da na'urar keɓan wutar lantarki da ke kusa da naúrar.
Haɗin kai
Samar da Wutar Lantarki & Haɗin Relay
Ba a sanye take da masu hana tartsatsin lambobi ba. Lokacin amfani da fitarwa na gudun ba da sanda don sauyawa na inductive lodi (coils, contactors, ikon relays, electromagnets, Motors da dai sauransu) shi ake bukata don amfani da ƙarin suppression kewaye (yawanci capacitor 47nF / min. 250VAC a cikin jerin tare da 100R/5W resistor), an haɗa. a layi daya zuwa relay tashoshi ko (mafi kyau) kai tsaye a kan lodi.
Haɗin kewayawa
Haɗin OC-Nau'in fitarwa
Haɗin Fitar Yanzu Ta Amfani da Wutar Lantarki na Ciki
Haɗin Fitar Yanzu Ta Amfani da Wutar Lantarki na Waje
Haɗin Mitar Guda (Nau'in Relay)
| Tsarin TKM: 4-20mA fitarwa | ||
| Tashar tashar TVF | Launin Waya | Bayani |
| 7 | Blue | -VDC |
| 8 | Brown | + VDC |
| 11 | Yellow | mA+ da |
| 12 | Grey | mA- |
| TKS Series: Pulse Output | ||
| GPM/Pulse = K factor | ||
| Tashar tashar TVF | Launin Waya | Bayani |
| 7 | Blue | -VDC |
| 8 | Brown | + VDC |
| 10 | Baki | Farashin NPN |
| Tsalle 13 & 8 | ||
| Jerin TKW: Pulse Output | ||
| GPM/Pulse = K factor | ||
| Tashar tashar TVF | Launin Waya | Bayani |
| 7 | Blue | -VDC |
| 8 | Brown | + VDC |
| 10 | Baki | Pulse |
| Tsalle 13 & 8 | ||
| Tsarin TKW: 4-20mA fitarwa | ||
| Tashar tashar TVF | Launin Waya | Bayani |
| 7 | Blue | -VDC |
| 8 | Brown | + VDC |
| 11 | Baki | mA+ da |
| 12 | Fari | mA- |
| Jerin TKP: Pulse Output | ||
| GPM/Pulse = K factor | ||
| Tashar tashar TVF | Launin Waya | Bayani |
| 7 | Blue | -VDC |
| 8 | Brown | + VDC |
| 10 | Baki | Pulse |
| Tsalle 13 & 8 | ||
| TIW Series: Pulse Output | ||
| GPM/Pulse = K factor | ||
| Tashar tashar TVF | Launin Waya | Bayani |
| 7 | Blue | -VDC |
| 8 | Brown | + VDC |
| 10 | Fari | Pulse |
| Tsalle 13 & 8 | ||
| TIM | Jerin Shawara: Pulse Output | ||
| GPM/Pulse = K factor | ||
| Tashar tashar TVF | Launin Waya | Bayani |
| 7 | Blue | -VDC |
| 8 | Brown | + VDC |
| 10 | Baki | Pulse |
| Tsalle 13 & 8 | ||
| Jerin TIM: 4-20mA fitarwa | ||
| Tashar tashar TVF | Launin Waya | Bayani |
| 7 | Blue | -VDC |
| 8 | Brown | + VDC |
| 11 | Yellow | mA+ da |
| 12 | Grey | mA- |
| UF 1000 | 4000 | 5000 - Fitar Pulse | ||
| GPM/Pulse = K factor | ||
| Tashar tashar TVF | Pin | Bayani |
| 8 | 1 | + VDC |
| 10 | 2 | Pulse |
| 7 | 3 | -VDC |
| Tsalle 13 & 8 | ||
| UF 1000 | 4000 | 5000 - 4-20mA fitarwa | ||
| Tashar tashar TVF | Pin | Bayani |
| 8 | 1 | + VDC |
| 11 | 2 | +mA |
| 7 | 3 | -VDC |
| Tsalle 12 & 7 | ||
| ProPulse (Lead mai tashi) - Fitowar bugun jini | ||
| GPM/Pulse = K factor | ||
| Tashar tashar TVF | Launin Waya | Bayani |
| 7 | Garkuwa | -VDC |
| 8 | Ja | + VDC |
| 10 | Blue | Pulse |
| Tsalle 13 & 8 | ||
| ProPulse®2 - Fitar bugun jini | ||
| Tashar tashar TVF | Launin Waya | Bayani |
| 7 | Blue | -VDC |
| 8 | Brown | + VDC |
| 10 | Baki | Pulse |
| Tsalle 13 & 8 | ||
Shirye-shiryen K Factor
Shirye-shiryen Relays
Shirye-shiryen Batching
Sake saitin Batch
Sake saitin Totalizer
Garanti, Komawa da Iyakoki
Garanti
Icon Process Controls Ltd yana ba da garantin ga ainihin mai siyan samfuransa cewa irin waɗannan samfuran ba za su kasance marasa lahani a cikin kayan aiki da aiki a ƙarƙashin amfani da sabis na yau da kullun ba daidai da umarnin da Icon Process Controls Ltd ya bayar na tsawon shekara ɗaya daga ranar. sayar da irin waɗannan samfuran. Wajabcin Icon Process Controls Ltd a ƙarƙashin wannan garanti yana iyakance ne kawai ga gyara ko sauyawa, a zaɓin Icon Process Controls Ltd, na samfuran ko abubuwan haɗin gwiwa, wanda jarrabawar Icon Process Controls Ltd ta ƙayyade ga gamsuwar ta zama naƙasa a cikin kayan ko aiki a ciki. lokacin garanti. Dole ne a sanar da Icon Process Controls Ltd bisa ga umarnin da ke ƙasa na kowane da'awar ƙarƙashin wannan garanti a cikin kwanaki talatin (30) na duk wani da'awar rashin daidaituwar samfurin. Duk wani samfurin da aka gyara ƙarƙashin wannan garanti za a yi garanti ne kawai na ragowar lokacin garanti na asali. Duk wani samfurin da aka bayar azaman maye a ƙarƙashin wannan garanti za a ba shi garantin na shekara ɗaya daga ranar sauyawa.
Yana dawowa
Ba za a iya mayar da samfuran zuwa Icon Process Controls Ltd ba tare da izini kafin izini ba. Don dawo da samfurin da ake tunanin bashi da lahani, je zuwa www.iconprocon.com, sannan a ƙaddamar da fom ɗin neman dawowar abokin ciniki (MRA) kuma bi umarnin da ke ciki. Duk garanti da samfurin mara garanti ya dawo zuwa Icon Process Controls Ltd dole ne a tura shi wanda aka riga aka biya kuma a sanya shi. Icon Process Controls Ltd ba zai ɗauki alhakin duk samfuran da suka ɓace ko suka lalace a jigilar kaya ba.
Iyakance
Wannan garantin baya aiki ga samfuran waɗanda: 1) sun wuce lokacin garanti ko samfuran waɗanda ainihin mai siye baya bin hanyoyin garanti da aka zayyana a sama; 2) an fuskanci lalacewar lantarki, inji ko sinadarai saboda rashin dacewa, haɗari ko rashin kulawa; 3) an canza ko canza; 4) wanin ma'aikacin sabis wanda Icon Process Controls Ltd ya ba shi izini ya yi ƙoƙarin gyarawa; 5) sun shiga cikin haɗari ko bala'o'i; ko 6) sun lalace yayin jigilar kayayyaki zuwa Icon Process Controls Ltd yana da haƙƙin barin wannan garanti tare da zubar da duk wani samfurin da aka mayar wa Icon Process Controls Ltd inda: 1) akwai shaidar wani abu mai haɗari da ke tattare da samfurin; ko 2) samfurin ya kasance ba a da'awar a Icon Process Controls Ltd na fiye da kwanaki 30 bayan Icon Process Controls Ltd ya nemi tsari. Wannan garantin yana ƙunshe da takamaiman garanti na Icon Process Controls Ltd dangane da samfuran sa. DUK GARANTIN DA AKE NUFI, BA TARE DA IYAKA BA, GARANTIN SAMUN KASANCEWA DA KYAUTATA DON MUSAMMAN MANUFAR, AKA KWANA. Magungunan gyare-gyare ko musanya kamar yadda aka bayyana a sama sune keɓantattun magunguna don keta wannan garanti. BABU ABUBUWAN DA AKE DAUKI Icon Process Controls Ltd BA ZA SU IYA HANNU GA DUK WATA LALACEWA KO SABODA HADA DA KIYAYYA KO DUKIYA TA GASKIYA KO GA RAUNI GA KOWANE MUTUM. WANNAN GARANTIN YANA DA KARSHE, CIKAKKEN MAGANAR WARRANTI, KUMA BABU MUTUM DA AKA IKON YIN WANI GARANTI KO WAKILI MADADIN Icon Process Controls Ltd. Wannan garantin za a fassara shi ga lardin Ontario. Idan kowane ɓangare na wannan garantin ya kasance mara inganci ko rashin aiwatarwa saboda kowane dalili, irin wannan binciken ba zai lalata duk wani tanadi na wannan garanti ba.
Don ƙarin takaddun samfur da tallafin fasaha
- ziyarci: www.iconprocon.com
- e-mail: sales@iconprocon.com
- or support@iconprocon.com
- Ph: 905.469.9283
Takardu / Albarkatu
 |
ICON HANYAR SAMUN SAUKI TVF [pdf] Manual mai amfani Jerin TVF, TVF Series Mai Kula da Nuni Mai Rarraba, Mai Gudanar da Nuni Mai Ruwa, Mai Kula da Nuni, Mai Sarrafa |
