HOVERTECH HM39HS Hover Matt Air Transfer System

Tšebeliso e Reriloeng le Litlhokomelo

TŠEBELETSO TŠEBELETSO
HoverMatt® Air Transfer System e sebelisetsoa ho thusa bahlokomeli ka phetisetso ea bakuli, ho beha maemo, ho reteleha le ho pota-pota. HoverTech Air Supply e hlohlelletsa HoverMatt hore e koalehe le ho beleha mokuli, ha moea o tsoa ka nako e le 'ngoe mekoting e ka tlase, ho fokotsa matla a hlokahalang ho tsamaisa mokuli ka 80-90%.

MATS'OAOA

• Bakuli ba sitoang ho thusa phetisong ea bona ea lateral
• Bakuli bao boima ba bona kapa boima ba bona bo ka behang kotsi ea bophelo bo botle ho bahlokomeli ba ikarabellang bakeng sa ho beha maemo kapa ho fetisetsa ka morao ho bakuli.

TS'ELISO TS'OANELO

• Bakuli ba nang le ho robeha ha thoracic, cervical kapa lumbar fractures tse nkoang li sa tsitsa, ntle le haeba li sebelisa hammoho le lesapo la mokokotlo holim'a HoverMatt (latela protocol ea naha ea hau mabapi le tšebeliso ea mapolanka a mokokotlo)

REETSO MAHLOKO

• Lipetlele, litsi tsa tlhokomelo ea nako e telele kapa tse atolositsoeng

MEKELETSO - HOVERMATT

• Bahlokomeli ba tlameha ho netefatsa hore li-brake tsohle tsa caster li sebelisitsoe pele li fetisoa.
• Bakeng sa polokeho, kamehla sebelisa batho ba babeli nakong ea phetisetso ea mokuli.
• Bahlokomeli ba eketsehileng ba khothalletsoa ha u tsamaisa mokuli ho feta 750 lbs / 340kg.
• Le ka mohla u se ke ua siea mokuli a sa hlokomeloa ka sesebelisoa se nang le moea o matla.
• Sebelisa sehlahisoa sena molemong oa sona feela joalokaha ho hlalositsoe bukeng ena.
• Sebelisa feela lihokelo le/kapa lisebelisoa tse lumelletsoeng ke Hov-erTech International.
• Ha u fetisetsa betheng e tlaase ea tahlehelo ea moea, beha moea oa materase oa bethe ho ea boemong bo phahameng ka ho fetisisa bakeng sa sebaka se tiileng sa ho fetisa.
• Le ka mohla u se ke ua leka ho tsamaisa mokuli ho HoverMatt e sa sebetseng.
• TLHOKOMELISO: Ho OR - Ho thibela mokuli hore a se ke a thella, kamehla deflate HoverMatt 'me u sireletse mokuli le HoverMatt tafoleng ea OR pele u tsamaisa tafole sebakeng sa angled.

LITEKO - PHEKO EA MOEA

• Eseng bakeng sa ho sebelisoa boteng ba li-anesthetics tse tukang kapa ka phaposing ea hyperbaric kapa tente ea oksijene.
• Tsamaisa thapo ea motlakase ka mokhoa oa ho netefatsa hore ha ho kotsi.
• Qoba ho thibela moea o kenang phepelong ea moea.
• Ha u sebelisa HoverMatt sebakeng sa MRI, ho hlokahala hose ea MRI e khethehileng ea 25 ft (e fumanehang bakeng sa ho reka).
• TLHOKOMELISO: Qoba ho tsosoa ke motlakase. Se ke oa bula phepelo ea moea.
• TLHOKOMELISO: Litaelo tse khethehileng tsa tšebeliso ea lisebelisoa tsa ho sebetsa.

Karolo ea Boitsebiso - HoverMatt® Air Transfer Mattress

Karolo ea Boitsebiso - HT-Air® 1200 Air Supply

Mosebetsi oa HT-Air® 1200 Air Supply Keypad.

• FETOHANG: E sebelisoa le lisebelisoa tsa ho beha maemo tse thusoang ke moea tsa HoverTech. Ho na le litlhophiso tse 'ne tse fapaneng. Mongolo o mong le o mong oa konopo o eketsa khatello ea moea le sekhahla sa inflation. Green Flashing LED e tla bonts'a lebelo la inflation ka palo ea likhahla (ke hore, mahlaseli a mabeli a lekana le lebelo la bobeli la inflation). Litlhophiso tsohle tse lethathamong la ADJUSTABLE li tlase haholo ho feta litlhophiso tsa HoverMatt le HoverJack. Mosebetsi oa ADJUSTABLE ha oa lokela ho sebelisoa ho fetisa. Setlhophiso sa ADJUSTABLE ke tšobotsi ea tšireletso e ka sebelisoang ho etsa bonnete ba hore mokuli o tsepamisitsoe ho lisebelisoa tse thusoang ke moea tsa HoverTech le hore butle-butle a tloaele mokuli ea tšohileng kapa ea utloang bohloko ka bobeli le ho sebetsa ha lisebelisoa tse nang le moea o motlakase.
• EMA HAUFI: E sebelisetsoa ho emisa phallo ea theko / moea (Amber LED e bontša STANDBY mode).
• HOVERMATT 28/34: E sebelisoa le 28 ″ & 34 ″ HoverMatts le HoverSlings.
• HOVERMATT 39/50 & HOVERjack: E sebelisoa le 39 ″ & 50 ″ HoverMatts le HoverSlings le 32 ″ & 39 ″ HoverJacks.

Lisebelisoa tsa Air200G/Air400G
Haeba u sebelisa HoverTech's Air200G kapa Air400G Air Supplies, tobetsa konopo e putsoa ka holim'a canister ho qala ho phalla ha moea. Tobetsa konopo hape ho emisa ho phalla ha moea.

Litaelo tsa ho Sebelisa - HoverMatt® Air Transfer System

1. Ka ho khetheha mokuli o lokela ho ba boemong ba supine.
2. Beha HoverMatt ka tlas'a mokuli u sebelisa mokhoa oa ho roala li-log le likhoele tse sireletsehileng tsa mokuli ka bolokolohi.
3. Hokela thapo ea motlakase ea HoverTech Air Supply ka har'a sebaka sa motlakase.
4. Kenya nozzle ho e 'ngoe ea likhakanyo tse peli tsa hose qetellong ea HoverMatt 'me u kene sebakeng.
5. Etsa bonnete ba hore libaka tsa phetisetso li haufi ka moo ho ka khonehang 'me u notle mabili ohle.
6. Haeba ho khoneha, fetisetsa ho tloha sebakeng se phahameng ho ea sebakeng se tlaase.
7. Bulela HoverTech Air Supply.
8. Sututsa HoverMatt ka lehlakoreng, ebang ke hlooho pele kapa maoto pele. Hang ha u se u le bohareng, mohlokomeli ea fapaneng o lokela ho tšoara maqhama a haufi-ufi 'me a hulele sebakeng seo a se batlang.
9. Etsa bonnete ba hore mokuli o shebane le lisebelisoa tsa ho amohela pele ho deflation.
10. Tima moea 'me u sebelise liporo tsa bethe/stretcher. Tlosa marapo a tšireletso a mokuli.

HLOKOMELA: Ha u sebelisa 50 ”HoverMatt, lisebelisoa tse peli tsa moea li ka sebelisoa bakeng sa inflation.

Litaelo tsa ho Sebelisa - HoverMatt® SPU Link

KHOMELLA BEDFRAME

1. Tlosa marapo a ho kopanya lipokothong 'me u khomarele ka bolokolohi lintlheng tse tiileng holim'a foreimi ea bethe ho lumella SPU Link ho tsamaea le mokuli.
2. Pele o fetisoa le ho behoa ka mahlakoreng, khaola likhoele tse hokelang foreiming ea bethe 'me u li kenye lipokothong tse tsamaellanang tsa polokelo.

PHETHISO LATERE

1. Ka ho khetheha mokuli o lokela ho ba boemong ba supine.
2. Beha HoverMatt ka tlas'a mokuli u sebelisa mokhoa oa ho roala li-log le likhoele tse sireletsehileng tsa mokuli ka bolokolohi.
3. Hokela thapo ea motlakase ea HoverTech Air Supply ka har'a sebaka sa motlakase.
4. Kenya nozzle ho e 'ngoe ea likhakanyo tse peli tsa hose qetellong ea HoverMatt 'me u kene sebakeng.
5. Etsa bonnete ba hore libaka tsa phetisetso li haufi ka moo ho ka khonehang 'me u notle mabili ohle.
6. Haeba ho khoneha, fetisetsa ho tloha sebakeng se phahameng ho ea sebakeng se tlaase.
7. Bulela HoverTech Air Supply.
8. Sututsa HoverMatt ka lehlakoreng, ebang ke hlooho pele kapa maoto pele. Hang ha u se u le bohareng, mohlokomeli ea fapaneng o lokela ho tšoara maqhama a haufi-ufi 'me a hulele sebakeng seo a se batlang.
9. Etsa bonnete ba hore mokuli o shebane le lisebelisoa tsa ho amohela pele ho deflation.
10. Tima moea 'me u sebelise liporo tsa bethe/stretcher. Lokolla marapo a tšireletso a mokuli.
11. Tlosa likhoele tse hokelang lipokothong 'me u li khomarele ka bolokolohi lintlheng tse tiileng holim'a foreimi ea bethe.

Litaelo tsa ho Sebelisa - HoverMatt® Split-Leg Matt

LITHOTOMI SEEMO

1. Arola maoto ka likarolo tse peli ka bomong ka ho khaola li-snaps.
2. Beha karolo ka 'ngoe tafoleng ka maoto a mokuli.

PHETHISO LATERE

1. Netefatsa hore linepe tsohle tse bohareng ba leoto le leoto li hokahane.
2. Ka ho khetheha mokuli o lokela ho ba boemong ba supine.
3. Beha HoverMatt ka tlas'a mokuli u sebelisa mokhoa oa ho roala li-log 'me u sireletse leqhama la tšireletso la mokuli ka bolokolohi.
4. Hokela HoverTech Air Supply thapo ea motlakase ka har'a sebaka sa motlakase.
5. Kenya nozzle ho e 'ngoe ea likhakanyo tse peli tsa hose tse qetellong ea Reusable Split-Leg Matt, kapa mosikong oa Mokuli a le Mong a Sebelisa Leg-Leg Matt, 'me u kene sebakeng.
6. Etsa bonnete ba hore libaka tsa phetisetso li haufi ka moo ho ka khonehang 'me u notle mabili ohle.
7. Haeba ho khoneha, fetisetsa ho tloha sebakeng se phahameng ho ea sebakeng se tlaase.
8. Bulela HoverTech Air Supply.
9. Sututsa HoverMatt ka lehlakoreng, ebang ke hlooho pele kapa maoto pele. Hang ha u se u le bohareng, mohlokomeli ea fapaneng o lokela ho tšoara maqhama a haufi-ufi 'me a hulele sebakeng seo a se batlang.
10. Etsa bonnete ba hore mokuli o shebane le lisebelisoa tsa ho amohela pele ho deflation.
11. Koala HoverTech Air Supply 'me u sebelise liporo tsa bethe/stretcher. Tlosa lebanta la tšireletso la mokuli.
12. Ha Split-Leg Matt e senyeha, beha karolo e 'ngoe le e' ngoe ea leoto ka tsela e loketseng.

Litaelo tsa ho Sebelisa - HoverMatt® Half-Matt

1. Ka ho khetheha mokuli o lokela ho ba boemong ba supine.
2. Beha HoverMatt ka tlas'a mokuli u sebelisa mokhoa oa ho roala logong 'me u sireletse leqhama la tšireletso la mokuli ka bolokolohi.
3. Hokela thapo ea motlakase ea HoverTech Air Supply ka har'a sebaka sa motlakase.
4. Kenya nozzle ho e 'ngoe ea likhakanyo tse peli tsa hose qetellong ea Hover-Matt 'me u kene sebakeng.
5. Etsa bonnete ba hore libaka tsa phetisetso li haufi ka moo ho ka khonehang 'me u notle mabili ohle.
6. Haeba ho khoneha, fetisetsa ho tloha sebakeng se phahameng ho ea sebakeng se tlaase.
7. Bulela HoverTech Air Supply.
8. Sututsa HoverMatt ka lehlakoreng, ebang ke hlooho pele kapa maoto pele. Hang ha u se u le bohareng, mohlokomeli ea fapaneng o lokela ho tšoara maqhama a haufi le ho hulela sebakeng seo a se batlang. Etsa bonnete ba hore mohlokomeli oa maoto o tataisa maoto a mokuli nakong ea phetisetso.
9. Etsa bonnete ba hore mokuli o shebane le lisebelisoa tsa ho amohela pele ho deflation.
10. Koala HoverTech Air Supply 'me u sebelise liporo tsa bethe/stretcher. Tlosa lebanta la tšireletso la mokuli.

TLHOKOMELISO: KA MEHLA SEBELISA BAHLOKOBI BA BARARO HA U SEBELISA HOVERMATT HALF-MATT.

Litlhaloso tsa Sehlahisoa / Lisebelisoa tse Hlokehang

HOVERMATT® AIR TRANSFER MATTRESS (E REUSable)

Mohaho o Tiisitsoeng ka Mocheso

• Mohlala #: HM28HS – 28″ W x 78″ L
• Mohlala #: HM34HS – 34″ W x 78″ L
• Mohlala #: HM39HS – 39″ W x 78″ L
• Mohlala #: HM50HS – 50″ W x 78″ L

Kaho e Apesitsoeng Habeli

• Mohlala #: HM28DC - 28″ W x 78″ L
• Mohlala #: HM34DC - 34″ W x 78″ L
• Mohlala #: HM39DC - 39″ W x 78″ L
• Mohlala #: HM50DC - 50″ W x 78″ L

HoverMatt Split-Leg Matt

• Mohlala oa #: HMSL34DC - 34″ W x 78″ L
• Boima ba LIMIT 1200 LBS/ 544 KG

HoverMatt Half-Matt

• Mohlala oa #: HM-Mini34HS – 34″ W x 45″ L

Kaho e Apesitsoeng Habeli

• Mohlala oa #: HM-Mini34DC - 34″ W x 45″ L
• Boima ba LIMIT 600 LBS/ 272 KG

HOVERMATT® MOLWETSI A LE MOTHO A LE MOTHO O SEBELISA MAMATRESE A PHETELLA MOEA

HoverMatt Tšebeliso ea Mokuli a le Mong

• Mohlala #: HM34SPU - 34″ W x 78″ L (10 ka lebokose le leng)
• Mohlala #: HM34SPU-B - 34″ W x 78″ L (10 ka lebokoseng)*
• Mohlala #: HM39SPU - 39″ W x 78″ L (10 ka lebokose le leng)
• Mohlala #: HM39SPU-B - 39″ W x 78″ L (10 ka lebokoseng)*
• Mohlala #: HM50SPU - 50″ W x 78″ L (5 ka lebokose le leng)
• Mohlala #: HM50SPU-B - 50″ W x 78″ L (5 ka lebokoseng)*
• Mohlala #: HM50SPU-1Matt – 50″ W x 78″ L (Yuniti e 1)
• Mohlala #: HM50SPU-B-1Matt – 50″ W x 78″ L (Yuniti e 1)*

HoverMatt SPU Split-Leg Matt

• Mohlala #: HM34SPU-SPLIT – 34″ W x 64″ L (10 ka lebokose le leng)
• Mohlala #: HM34SPU-SPLIT-B – 34″ W x 64″ L (10 ka lebokose le leng)* HoverMatt SPU Link
• Mohlala #: HM34SPU-LNK-B – 34″ W x 78″ L (10 ka lebokoseng)*
• Mohlala #: HM39SPU-LNK-B – 39″ W x 78″ L (10 ka lebokoseng)*
• Mohlala #: HM50SPU-LNK-B – 50″ W x 78″ L (5 ka lebokoseng)* WEIGHT LIMIT 1200 LBS/ 544 KG

HoverMatt SPU Half-Matt

• Mohlala oa #: HM34SPU-HLF - 34″ W x 45″ L (10 ka lebokose le leng)
• Mohlala #: HM34SPU-HLF-B – 34″ W x 45″ L (10 ka lebokoseng)*
• Mohlala oa #: HM39SPU-HLF - 39″ W x 45″ L (10 ka lebokose le leng)
• Mohlala #: HM39SPU-HLF-B – 39″ W x 45″ L (10 lebokoseng le leng)* WEIGHT LIMIT 600 LBS/ 272 KG
• Mohlala o phefumolohang

HLOKAHALA MOKHOA

• Mohlala #: HTAIR1200 (Phetolelo ea Amerika Leboea) - 120V~, 60Hz, 10A
• Mohlala #: HTAIR2300 (European Version) - 230V~, 50 Hz, 6A
• Mohlala #: HTAIR1000 (Japanese Version) - 100V~, 50/60 Hz, 12.5A
• Mohlala #: HTAIR2356 (Korean Version) - 230V~, 50/60 Hz, 6A
• Mohlala #: AIR200G (800 W) - 120V~, 60Hz, 10A
• Mohlala #: AIR400G (1100 W) - 120V~, 60Hz, 10A

Ho sebelisa HoverMatt® Air Transfer System ka Phaposing ea Ts'ebetso

KHETHO EA 1
Beha HoverMatt setulong sa Pre-Op kapa bethe pele mokuli a fihla. E-ba le mamello ea ho robala betheng / stretcher kapa sebelisa HoverMatt ho fetisetsa lateral. Hang ha u le OR, etsa bonnete ba hore tafole ea OR e sirelelitsoe 'me e notletsoe fatše, ebe u fetisetsa mokuli holim'a tafole ea OR. E-ba le mohlokomeli ea ka sehloohong oa tafole ea OR etsa bonnete ba hore mokuli o tsepamisitse maikutlo pele a senya HoverMatt. Beha mokuli kamoo ho hlokahalang kateng bakeng sa ho buuoa. Beha mahlakore a HoverMatt tlas'a tafole ea OR, 'me u netefatse hore liporo tsa tafole lia fumaneha. Bakeng sa liopereishene tsa supine, latela mokhoa oa ho beha bakuli sebakeng sa hau. Kamora nyeoe, lokolla likarolo tsa HoverMatt tlasa tafole ea OR. Bofa likhoele tsa tšireletso tsa mokuli li theohe. Eketsa HoverMatt ka mokhoa o itseng o sebelisa boemo ba ADJUSTABLE, e-ba le mohlokomeli oa hlooho ea hlooho ea hlooho ho netefatsa hore mokuli o tsepamisitse maikutlo, ebe o kenya moea ka ho feletseng ho sebelisa boemo bo loketseng ba lebelo le phahameng. Fetisetsa mokuli setulong kapa betheng.

KHETHO EA 2
Pele mokuli a fihla, beha HoverMatt holim'a tafole ea OR 'me u kenye mapheo ka tlas'a tafole ea OR. Netefatsa hore liporo tsa tafole lia fumaneha. Fetisetsa mokuli tafoleng, 'me u tsoele pele joalokaha ho hlalositsoe ho Khetho ea 1.

TRENDELENBURG SEEMO
Haeba ho hlokahala Trendelenburg kapa Reverse Trendelenburg, sesebediswa se loketseng se kgahlanong le dilaete se tiisetswang foreiming ya tafole ya OR se tlameha ho sebediswa. Bakeng sa Reverse Trendelenburg, sesebelisoa se clamps ho OR foreimi ea tafole, joalo ka letlapa la maoto, e lokela ho sebelisoa. Haeba opereishene e boetse e kenyelletsa ho sekama ka lehlakore (ho fofa), mokuli o tlameha ho sireletsoa ka mokhoa o sireletsehileng hore a finyelle boemo bona pele a qala ho buuoa.

Tlhoekiso le Tlhokomelo e Thibelang

Pakeng tsa tšebeliso ea mokuli, HoverMatt e lokela ho hlakoloa ka tharollo ea ho hloekisa e sebelisoang ke sepetlele sa hau bakeng sa ho bolaea likokoana-hloko tsa lisebelisoa tsa bongaka. Mokelikeli oa bleach oa 10:1 (likarolo tse 10 tsa metsi: karolo e le 'ngoe ea bleach) kapa lisebelisoa tsa ho hloekisa likokoana-hloko le tsona li ka sebelisoa. Ho bohlokoa ho latela litaelo tsa moetsi oa tharollo ea ho hloekisa bakeng sa tšebeliso, ho kenyelletsa nako ea ho lula le ho tlala.

HLOKOMELA: Ho hloekisa ka tharollo ea bleach ho ka senya lesela. Haeba HoverMatt e ka sebelisoang hape e silafala hampe, e lokela ho hlatsuoa ka mochini o hlatsoang o nang le mocheso o phahameng oa metsi oa 160 ° F (65 ° C). Mokelikeli oa bleach oa 10:1 o ka sebelisoa (likarolo tse 10 tsa metsi: karolo e le 'ngoe ea bleach) nakong ea potoloho ea ho hlatsoa. HoverMatt e lokela ho omisoa moeeng ha ho khoneha. Ho omisa moea ho ka potlakisoa ka ho sebelisa phepelo ea moea ho potoloha moea ka hare ho HoverMatt. Haeba o sebelisa se omisang mochini, boemo ba mocheso bo lokela ho beoa sebakeng se batang ka ho fetesisa. Mocheso oa ho omisa ha oa lokela ho feta 115° F (46° C). Tšehetso ea nylon ke polyurethane 'me e tla qala ho senyeha ka mor'a ho omisa mocheso o phahameng khafetsa. HoverMatt e Coated Double ha ea lokela ho kenngoa ka har'a se omisang. Ho thusa ho boloka HoverMatt e hloekile, HoverTech International e khothaletsa tšebeliso ea maqephe a lahlehang. Eng kapa eng eo mokuli a robetseng ho eona ho boloka bethe ea sepetlele e hloekile e ka boela ea behoa holim'a HoverMatt. HoverMatt ea Mokuli a le Mong ha ea rereloa ho hlatsuoa kapa ho sebetsoa bocha.

TLHEKISO LE PHEPO EA MOEA
Sheba bukana ea phepelo ea moea bakeng sa litšupiso.

HLOKOMELA: SHEBA LITATAISO TSA HAO EA LEHAE/NAHA/FEDERAL/INTERNATIONAL PELE E LAHLWA.

THIBELLO TS'OANELO
Pele o sebelisoa, tlhahlobo ea pono e lokela ho etsoa ho HoverMatt ho netefatsa hore ha ho na tšenyo e bonahalang e ka etsang hore HoverMatt e se ke ea sebelisoa. HoverMatt e lokela ho ba le marapo le maqhama a tšireletso ea mokuli (bona bukana ea likarolo tsohle tse loketseng). Ha hoa lokela ho ba le meokho kapa masoba a ka thibelang HoverMatt ho phahama. Haeba ts'enyehelo efe kapa efe e ka fumanoa e ka etsang hore sistimi e se sebetse joalo ka ha e reriloe, HoverMatt e lokela ho tlosoa ho sebelisoa ebe e khutlisetsoa HoverTech International bakeng sa ho lokisoa (HoverMatts ea Mokuli a le Mong e lokela ho lahloa).

TŠEBELETSO MOLAOLI
HoverTech International e fana ka taolo e phahameng ea ts'oaetso ka HoverMatt ea rona e tiisitsoeng ka mocheso hape. Mohaho ona o ikhethang o felisa masoba a linalete a materase a rōkiloeng e ka bang litsela tsa ho kena ha baktheria. Ho feta moo, HoverMatt e tiisitsoeng ka mocheso, e Coated Double-Coated e fana ka sebaka sa bopaki ba marotholi bakeng sa ho hloekisa habonolo. HoverMatt ea Mokuli a le Mong e fumaneha hape ho felisa monyetla oa tšilafalo le tlhoko ea ho hlatsuoa. Haeba HoverMatt e sebelisetsoa mokuli ea itšehlang thajana, sepetlele se lokela ho sebelisa liprothokholo/mekhoa e tšoanang le eo se e sebelisang bakeng sa materase a bethe le/kapa masela a kamoreng eo ea mokuli.

Warranty Statement

HoverMatt e ka sebelisoang hape e netefalitsoe hore e se be le bofokoli ba thepa le moetso oa (1) selemo se le seng. Tiisetso e qala ka letsatsi la ts'ebeletso ka moemeli oa HoverTech International kapa letsatsi la thomello. Haeba ho ka etsahala hore ho be le bothata ka lebaka la phoso ea thepa kapa mosebetsi, re tla lokisa ntho ea hau hang-hang kapa re e nkele sebaka haeba re ikutloa eka e ke ke ea lokisoa - ka litšenyehelo le boikhethelo ba rona re sebelisa mefuta ea morao-rao kapa likarolo tse sebetsang tse tšoanang. mosebetsi - ka mor'a ho fumana ntho ea pele ho lefapha la rona la tokiso. Tšebeliso ea Mokuli a le Mong HoverMatts e tiisitsoe hore e se ke ea e-ba le mefokolo ea lintho tse bonahalang le ea ho sebetsa. Haeba ho ka etsahala hore ho be le bothata ka lebaka la bofokoli ba thepa kapa moetso oa eona, re tla potlakela ho khutlisa HoverMatts ea Mokuli a le Mong nakong ea matsatsi a mashome a robong (90) a ho reka kapa ho sebetsa. Tiisetso ena ha se tiisetso e se nang meeli bakeng sa bophelo ba sehlahisoa. Tiisetso ea rona ha e koahele tšenyo ea sehlahisoa e ka bakoang ke ts'ebeliso e hananang le litaelo kapa litlhaloso tsa Moetsi, tšebeliso e mpe, tlhekefetso, t.ampering, kapa tshenyo ka baka la ho tshoara hampe. Tiisetso ka ho khetheha ha e koahele tšenyo ea sehlahisoa e ka bakoang ke ho sebelisa phepelo ea moea e hlahisang ho feta 3.5 psi ho kenya moea HoverMatt. Thepa e ileng ea hlokomolohuoa, ea hlokomeloa ka mokhoa o sa lokelang, e lokisitsoeng kapa e fetotsoeng ke motho e mong ntle le moemeli ea lumelletsoeng oa Manufac-turer, kapa e sebelisitsoeng ka tsela efe kapa efe khahlano le litaelo tsa ts'ebetso, e tla hlakola tiisetso ena. Tiisetso ena ha e koahele "ho roala" ho tloaelehileng. Likarolo tsa likarolo, haholo-holo lisebelisoa life kapa life tseo u ka li khethang, li-valve caps, li-attachments le lithapo tsa tsona, li tla bontša hore li senyehile ha nako e ntse e ea 'me qetellong li ka hloka ho nchafatsoa kapa ho nkeloa sebaka. Mofuta ona o tloaelehileng oa ho apara ha o koaheloe ke waranti ea rona, empa re tla fana ka ts'ebeletso ea ho lokisa e potlakileng, ea boleng bo phahameng le likarolo ka theko e tlaase.

Boikarabello ba HoverTech International tlas'a tiisetso ena le kopo efe kapa efe ea mofuta ofe kapa ofe bakeng sa tahlehelo kapa tšenyo e bakiloeng ke, e amanang le, kapa e bakiloeng ke moralo, tlhahiso, thekiso, phano, ho kenya, ho lokisa kapa ts'ebetso ea lihlahisoa tsa eona. konteraka kapa tort, ho kenyeletsoa bohlasoa, e ke ke ea feta theko e lefshoang bakeng sa sehlahisoa 'me ha nako ea tiisetso e fela, melato eohle e joalo e tla fela. Litlharelo tseo tiisetso ena e fanang ka tsona li ikhethile 'me HoverTech International e ke ke ea jara boikarabello bakeng sa tšenyo leha e le efe ea tšohanyetso kapa ea litlamorao.

Ha ho na litiisetso, tse boletsoeng kapa tse boletsoeng, tse fetang polelo ena ea tiisetso. Lipehelo tsa likarolo tsena tsa tiisetso li sebakeng sa litiisetso tse ling kaofela, tse hlahisitsoeng kapa tse boletsoeng, le tsa litlamo kapa mekoloto e meng eohle e karolong ea HoverTech International 'me ha li nke kapa hona ho lumella motho ofe kapa ofe ho jara boikarabelo bofe kapa bofe bo amanang le HoverTech International. ka thekiso ea Moetsi kapa khiro ea lihlahisoa tse boletsoeng. HoverTech International ha e fane ka tiisetso ea ho rekisoa kapa ho phela hantle molemong o itseng. Ha ho na tiisetso ea hore thepa e tla tšoanela morero o itseng. Ka ho amohela thepa, moreki o lumela hore moreki o entse qeto ea hore thepa e loketse merero ea moreki.
LITLHAKISO TSA MOHAPI LI TLA FETOHA.

Lichelete le Litokiso
Lihlahisoa tsohle tse khutlisetsoang HoverTech International (HTI) li tlameha ho ba le nomoro ea Returned Goods Authorization (RGA) e fanoeng ke khamphani. Ke kopa o letsetse 800-471-2776 'me u kope setho sa Sehlopha sa RGA se tla u fa nomoro ea RGA. Sehlahisoa sefe kapa sefe se khutlisitsoeng ntle le nomoro ea RGA se tla baka tieho nakong ea tokiso. Tiisetso ea HTI e koahela mefokolo ea moetsi ho thepa le moetso. Haeba tokiso e sa koaheloe tlas'a tiisetso, tefiso e fokolang ea ho lokisa ea $ 100 ntho e 'ngoe le e' ngoe e tla hlahlojoa, hammoho le ho khutlisa thomello. Taelo ea Theko bakeng sa tefiso ea tokiso e lokela ho fanoa ke setsi nakong eo nomoro ea RGA e fanoang ka eona, haeba tokiso e sa koaheloe tlas'a waranti. Nako ea ho lokisa e ka ba libeke tse 1-2, ho sa kenyeletsoe nako ea ho tsamaisa thepa.

Lihlahisoa tse khutlisitsoeng li lokela ho romelloa ho:
HoverTech International

• Tlanya: RGA # ___________
• Mokhoa oa 4482 oa ho nchafatsa
• Allentown, PA 18109
• 4482 Innovation Way Allentown, PA 18109
• 800.471.2776
• Fax 610.694.9601
• www.HoverMatt.com
• Info@HoverMatt.com

Litokomane / Lisebelisoa

HOVERTECH HM39HS Hover Matt Air Transfer System [pdf] Bukana ea Mosebelisi HM39HS Hover Matt Air Transfer System, HM39HS, Hover Matt Air Transfer System, Matt Air Transfer System, Air Transfer System, Transfer System, System

Litšupiso

• Bukana ea Mosebelisi