MR8875 Memory HiCORDER 1000V Direct Input Multi Channel Logger

“

Litlhaloso:

• Lebitso la Sehlahisoa: MEMORY HiCORDER MR8875
• Keletso Voltage: 1000 V Ho kenya ka ho Otloloha
• Likanale: likanale tsa analoge tse 16 ho isa ho mocheso oa 60 oa thermocouple
  likanale tsa ho lekanya
• Sampling Speed: Ho fihla ho likanale tse 2 metsotsoana e meng le e meng e 2 kapa ho fihla ho 60
  likanale metsotso e meng le e meng e 50
• Bokhoni ba ho Rekota: Rekota liteishene tse 8 tsa data bakeng sa matsatsi a 155 kapa
  Likanale tse 60 tsa data bakeng sa matsatsi a 20
• Qeto: Qeto ea 16-bit

Litaelo tsa Tšebeliso ea Sehlahisoa:

Ts'ebetso ea ho Logger ea likanale tse ngata:

MR8875 e fana ka bokhoni ba ho lekanya likanale tse ngata ka a
moralo o kopaneng bakeng sa ho nkeha. Kenya li-module tsa ho kenya tse ipapisitseng le tsa hau
litlhoko tsa tekanyo, ho tloha ho likanale tsa analoge ho ea ho thermocouple
likanale tsa tekanyo ea mocheso.

Ho Rema Meru e Phahameng ka Ho Fetisisa:

Sesebelisoa se ka sampnka likanale tsohle ka metsotsoana e 2 feela.
U ka li sample likanale tse ngata ka linako tse fapaneng ha
o tsoela pele ho ngola lintlha ho karete ea memori ea Hioki SD.

Rekoto e Tsoelang Pele ea Nako e telele:

Ho boloka nako ea 'nete kareteng ea SD ho lumella ho tsoela pele ka nako e telele
ho rekota. Rekota data ka linako tse itseng ka nako e telele
sebelisa likarete tsa memori tsa SD tsa Hioki.

Memojule ea ho Kena e ka Khetholloang ke Mosebelisi:

Khetha le ho kenya li-module tsa ho kenya tse fihlang ho tse 'ne ho tsoa mefuteng e fapaneng ea
dikgetho. Kopanya le ho bapisa li-module tsa voltage, mocheso, khatello,
le litekanyo tsa matšoao a CAN ka qeto e phahameng.

Lisebelisoa:

• Liroboto tsa indasteri: E loketseng ho lekanya
  voltage, mocheso, khatello, le sephetho sa sensor indastering
  lisebelisoa tsa robotics.
• R&D kapa Liteko tsa Saense: E loketse bakeng sa
  tlhahlobo ea ts'ebetso le nako e telele, tlhahlobo ea sensor, le XY
  ho rekota litlhophisong tsa lipatlisiso le nts'etsopele.
• Mechini ea Kaho, Mechini ea Temo, le
  Likoloi: Ho mamella maemo a thata le ho lekanya
  voltage, mocheso, khatello, le matšoao a CAN bakeng sa nts'etsopele
  merero.
• Teko ea Inverter le Motor: Etsa ntho ea pele-
  le litekanyo tsa mahlakore a bobeli a phepelo ea motlakase, rekota
  waveforms, le ho leka libeteri tsa EV.

LBH:

Q: Na MR8875 e ka lekanya matla a phahamengtage inputs?

A: E, ka MR8905 Analog Unit, MR8875 e ka lekanya
voltage fihla ho 1000 V DC ka kotloloho.

Q: ke matla a ho rekota a MR8875 eng?

A: Sesebelisoa se ka rekota liteishene tse 8 tsa data bakeng sa matsatsi a 155 kapa 60
liteishene tsa data bakeng sa matsatsi a 20 ka nako ea 100 msec.

P: Na nka kopanya le ho bapisa li-module tsa ho kenya?

A: Ee, o ka khetha le ho kenya li-module tsa ho kenya tse fihlang ho tse 'ne ho tsoa
mefuta e mengata ea likhetho tse lumellanang le litlhoko tsa hau tsa ho lekanya.

"`

KHOPOTSO HiCORDER MR8875
1000 V Input Direct Input Multi-channel Logger
Joalo ka Setsi sa Mecha e mengata
MR8875 e fana ka bokhoni ba ho lekanya likanale tse ngata sebakeng se kopaneng, sa boholo ba A4 se netefatsang ho nkeha. Ho itšetlehile ka hore na ke li-module tsa ho kenya life tse kenngoa, bokhoni ba ho lekanya bo tloha ho li-analog tsa 16 ho ea ho tse 60 tsa tekanyo ea mocheso oa thermocouple.
Joalo ka Setsi sa Logger se Phahameng ka ho Fetisisa
MR8875 ka nako e le 'ngoe e ka sample likanale kaofela ka nako e ka tlase ho 2 sec. SampFumana liteishene tse fihlang ho tse 2 metsotsoana e meng le e meng e 'meli kapa ho fihla ho liteishene tse 2 metsotsoana e meng le e meng e 60 ha u ntse u ngola lintlha ka karete ea memori ea SD ka nako ea nnete. * Ts'ebetso e netefalitsoe feela ka likarete tsa memori tsa 'nete tsa Hioki SD.
E le Setsi sa ho Rekota se Tsoelang Pele sa Nako e Telele
Ho boloka nako ea sebele kareteng ea SD Ka nako ea 100 msec, MR8875 e ka rekota likanale tse 8 tsa data bakeng sa matsatsi a 155 kapa likanale tse 60 tsa data bakeng sa matsatsi a 20. * Ts'ebetso e netefalitsoe feela ka likarete tsa memori tsa 'nete tsa Hioki SD.
Mojule o mocha oa Tekanyo ea 1000 V RMS
Khetha 'me u kenye li-module tse' nè tsa ho kenya ho tsoa khethong e kholo. MR8875 e o lumella ho kopanya le ho bapisa li-module ho lekanya voltage, mocheso, khatello, le matšoao a CAN kapa metha matshwao a tlhahiso ea sensor ka qeto e phahameng, ea 16-bit.

2
Mekhoa ea ho Kena eo u ka e khethang bakeng sa Lisebelisoa tse ling! Compact Tharollo bakeng sa Methatso e mengata ea likanale

Liroboto tsa indasteri
Moqtage Temperature Control Signals Mathata

Liphetho tsa kutlo

Phapang ea mocheso likarolong tse tsamaeang

Mehaho e thehiloeng ho plug-in module e bolela hore o ka kopanya le ho rekota mefuta e fapaneng ea matšoao ho likanale tse ngata - e loketseng ho netefatsa ts'ebetso ea liroboto tse nang le li-multi-axis.

Mathata

Motlakase oa motlakase
Letšoao la taolo (logic probe)

Example ea motsoako oa module

Setsi sa Analoji MR8901

× 2

Moqtage/Setsi sa Temp MR8902 × 1

Sehlopha sa mathata MR8903

× 1

R&D kapa Liteko tsa Saense

Moqtage

Mocheso

Ka matla a eona a ho rekota a li-channel tse ngata, a nako e telele, MR8875 e loketse ho sebelisoa lits'ebetsong tsa nts'etsopele joalo ka tlhahlobo ea ts'ebetso le nako e telele.
- Rekota tlhahiso ea sensor. - Lekola li-sensor le lisebelisoa tse ling. - Sebelisa e le sehatisi sa XY (se betheng).

Example ea motsoako oa module

Setsi sa Analoji MR8901

× 2

Moqtage/Setsi sa Temp MR8902 × 2

Ntlafatso ea Mechini ea Kaho, Mechini ea Temo, le Likoloi
Moqtage Mocheso oa Mocheso KA
ECU ECU
KA

Mocheso o matlafalitsoeng oa tikoloho le khanyetso ea ho sisinyeha li thusa MR8875 ho mamella maemo a boima a litekanyo.

Example ea motsoako oa module

Setsi sa Analoji MR8901

× 1

Moqtage/Temp Unit MR8902

× 1

Sehlopha sa mathata MR8903

× 1

CAN Unit MR8904

× 1

BA SA THOLAHANG BA KA SENSOR SP7001-95* × 1

*CAN FD ha e tšehetsoe ha e sebelisoa le MR8875 le MR8904.

3
Lisebelisoa
Sehatisi sa Boitsebiso ba Lebelo le Phahameng
MR8875

Teko ea Inverter le Motor
Phahameng-voltage input (MR8905)

Tekanyo ea mantlha le ea bobeli ea phepelo ea motlakase ea UPS le li-transformer tsa phepelo ea motlakase ea khoebo Rekota li-waveform tsa maqhubu a mantlha le a mahlakore a bobeli.

Clamp- Ka Sensor

Sensor ea torque Encoder

Betri

Inverter

Example ea motsoako oa module
Yuniti ea Analoji MR8905 × 2
(ho fihlela ho 4 high-voltaglikanale)
Yuniti ea Analog MR8901 × 2 (ho fihla ho 4 e tlase-voltagliteishene tsa e le liteishene tse 4 tsa tlhahiso ea sensor ea hajoale)

Sensor ea Motlakase
Pulse input

Methara ea torque
·Torque ·Ho potoloha

Laela

Teko ea libeteri tsa EV
1000 V DC (CAT II)

Lekanya ECU le EV inverter tlhahiso ea li-waveforms

Ka Yuniti ea Analog ea MR8905, MR8875 e ka lekanya voltage ea lisele tsa betri ka bomong- ts'ebetso e hlokang ho nepahala ho phahameng le qeto e phahameng-ka qeto ea 16-bit (1/1250 ea mefuta). Sesebelisoa se ka lekanya matšoao a fihlang ho 1000 V DC ka kotloloho.

LEBETHA

· Tekolo ea betri
Example la matshwao a taolo le tekanyo ya tefiso/ho ntsha nako

Teko ea Lisebelisoa tsa Matla Tlhahlobo ea Litšobotsi tsa matla

thepa

600 V AC (CAT III)

(ho hana thepa le tlhahlobo ea sekhechana sa potoloho)

· Teko ea ho hana mojaro
Sekaseka likamano lipakeng tsa lintlha tse kang jenereithara voltage pele le ka mor'a ts'ebetso ea potoloho ea potoloho, tekanyo ea ho fetoha ha RPM, boemo ba ts'ebetso ea 'musisi oa servo, le nako ea ts'ebetso ea khatello ea khatello.

4
1 Ho Boloka Nako ea Sebele
ho karete ea SD e nang le qeto e phahameng

Bokella lipontšo tsa 'mele ka 500 kS/ssampsekhahla sa ling se nang le qeto e phahameng ea lintlha tse 25,000 fs

Kenyeletso

Phetoho ea A/D

Ho behwa ka thoko

lintlha tse 25,000

Mokhoa o ts'oanang oa ts'ebetso joalo ka oa oscilloscope ea dijithale o sebelisoa ho rekota data ho mohopolo o ka hare o nang le bokhoni bo boholo ka lebelo le phahameng. The sampsekhahla sa ling ke 500 kS/s (nako ea 2 s) likanaleng tsohle ka nako e le 'ngoe. Maqhubu a maqhubu a sensor a tlalehiloe 'me a emeloa ka botšepehi. Ho feta moo, qeto ea 16-bit A / D e netefatsa hore le liphetoho tse poteletseng ho matšoao a sensor ha li fetoloe.
Ho rekota data ea SD ea lebelo le holimo ke ntlafatso e kholo ho feta lihlahisoa tsa khale
MR8875 e nka peletage ea mahlale a morao-rao a karete ea SD ho fana ka poloko ea nako ea nnete ka potlako ho karete ea memori ho tloha ka nako ea 2 s (ts'ebetso e netefatsoa feela ka karete ea memori ea 'nete ea HIOKI SD). Ha nako ea ho rekota (sampling rate) ke 50 s kapa ka tlase, data ea liteishene tsohle tse 60 e ka rekotoa nako le nako ka nako e telele.

Sampnako e khuts'oane joalo ka 2 sec (samplebelo la bolelele ba 500 kS/s)

Ngola mohopolong o ka hare

n Nako e phahameng ea ho rekota mohopolong oa polokelo ea kahare (e sa felletseng)
* Kaha memori e bolokiloe mojulung o mong le o mong, chate ena ke papiso ea ho boloka yuniti e le 'ngoe. * Menahano e hahelletsoeng ka hare, le ho kenya li-pulses P1 le P2 e 'ngoe le e' ngoe e sebelisa matla a polokelo a lekanang le kanale e le 'ngoe ea analog.

No. ea likanale tse tla sebelisoa

1 kh

3 ho ea ho 4 likh

9 ho ea ho 16 likh

Nako ea axis (ha e feletse)
200 s / div

Nako
2 s

80,000 div 16s

20,000 div 4s

5,000 div 1s

1 ms/div 10 mts

1 mets 20s

20 s

5 s

10 ms/div 100 mts

13 mets 20s

3 mets 20s

50 s

100 ms/div 1 ms 2 h 13 mets 20 s

33 mets 20s

8 mets 20s

1 s/div 10 ms 22 h 13 mets 20 s 5 h 33 mets 20 s 1 h 23 mets 20 s

10 ms/div 100 ms 9 d 06 h 13 mets 20 s 2 d 07 h 33 mets 20 s 13 h 53 mets 20 s

100 s/div 1.0 s 92 d 14 h 13 mets 20 s 23 d 03 h 33 mets 20 s 5 d 18 h 53 mets 20 s

5 mets/div 3.0 s 277 d 18 h 40 mets 69 d 10 h 40 mets 17 d 08 h 40 mets

Kenyeletso

Phetoho ea A/D

Ho behwa ka thoko

lintlha tse 25,000

n Nako e phahameng ea ho rekota ho karete ea memori ea 2 GB SD
* Kaha lintlha tsa hlooho li kenyelelitsoe, data ea tekanyo e rekotiloeng e ka ba 90% ea nako e bontšitsoeng tafoleng e ka tlase. Moeli o kaholimo ke matsatsi a 1,000 empa ts'ebetso e netefalitsoe bakeng sa selemo se le seng.
* Nako ea ho rekota e lekantsoe ho latela palo ea likanale tsa ho metha. * Menahano e hahelletsoeng ka hare, li-pulses P1 le P2 e 'ngoe le e' ngoe e sebelisa sebaka sa polokelo se lekanang le se le seng.
kanale ea analoge.

Sampnako e khuts'oane joalo ka 2 sec (samplebelo la ho sebetsa la 500 kS/sec)

Ngolla karete ea memori ea SD ka nako ea nnete

Mokhahlelo oa nako

Nako ea ho rekota

200 s / div

2 s

500 s / div

5 s

1 ms/div 10 mts

2 ms/div 20 mts

5 ms/div 50 mts

10 ms/div 100 mts

20 ms/div 200 mts

50 ms/div 500 mts

100 ms / div

1 ms

200 ms / div

2 ms

500 ms / div

5 ms

1 s/div 10 ms

2 s/div 20 ms

5 s/div 50 ms

10 s/div 100 ms

30 s/div 300 ms

50 s/div 500 ms

60 s/div 600 ms

100 s / div

1.0 s

2 mets/div

1.2 s

5 mets/div

3.0 s

1 kh
35 mets 47 s 1 h 29 mets 28 s 2 h 58 mets 57 s 5 h 57 mets 54 s 14 h 54 mets 47 s 1 d 05 h 49 mets 34 s 2 d 11 h 39 mets 08 6 mets 05 07 s 50 D 12 mm 10 S 15 m 41 m min 24 s 20 mm 31 m Moeli o ka holimo matsatsi a 23 Moeli o ka holimo matsatsi a 62 Moeli o ka holimo matsatsi a 03 Moeli o ka holimo matsatsi a 18 Moeli o ka holimo matsatsi a 29 Moeli o ka holimo matsatsi a 124 Moeli o ka holimo matsatsi a 06

2 kh
17 mets 53 s 44 mets 44 s 1 h 29 mets 28 s 2 h 58 mets 57 s 7 h 27 mets 23 s 14 h 54 mets 47 s 1 d 05 h 49 mets 34 s 3 d 02 33 h 55 h 6 mets 05 s 07 d 50 h 12 mets 10 s 15 d 41 h 31 mets 01 s 39 d 14 h 62 min 03 s 18 d 29 h 124 mets 06 s 36 d 58 min 310 16h 32h 25 mets 621 s Moeli o ka holimo matsatsi a 09 Moeli o ka holimo matsatsi a 04 Moeli o ka holimo matsatsi a 51 Moeli o ka holimo matsatsi a 1000 Moeli o ka holimo matsatsi a 1000 Moeli o ka holimo matsatsi a 1000

4 kh
N/A 22 mets 22 s 44 mets 44 s 1 h 29 mets 28 s 3 h 43 mets 41 s 7 h 27 mets 23 s 14 h 54 mets 47 s 1 d 13 h 16 mets 57 s 3 02 33 55 s 6 d05 h 07 mets 50 s 15 d 12 h 39 mets 14 s 31 d 01 h 39 mets 14 s 62 d 03 h 18 min 29 s 155 d 08 h 16 mets 12 s 310 16 32 25 932 d 01 h 37 mets 16 s Moeli o ka holimo matsatsi a 1000 Moeli o ka holimo matsatsi a 1000 Moeli o ka holimo matsatsi a 1000 Moeli o ka holimo matsatsi a 1000 Moeli o ka holimo matsatsi a 1000

8 kh
N/A 11 mets 11 s 22                                                                                                                                        » » » h 22 mets 44 S 44 h 1 51 h 50 3 43 h 41 min 7 s 27 23 d 18 h 38 min 28 s 1 d 13 h 16 min 57 s Moeli o ka holimo matsatsi a 3 Moeli o ka holimo matsatsi a 02 Moeli o ka holimo matsatsi a 33

16 kh
N / a 11 mm 11 s 22 mm 22 m min d 55 h 55 mets 1 s 51 d 50                                                                                                        }') s 3 d 43 h 41 min 9 s 19 d 14 h 18 min 38 s 28 d 1 h 13 min 16 s Moeli o ka holimo matsatsi a 57

30 kh
N/AN/AN/A 11 metsotso 55 s 29 metsotso 49 s 59 metsotso 39 s 1 h 59 metsotso 18 s 4 h 58 metsotso 15 s 9 h 56 metsotso 31 s 19 h 53 metsotso 2 s 2 d 01 42h 36 s 4 d 03 h 25 mets 13 s 8 d 06 h 50 h 27 min 20 h 17 d 06 09 s 41 d 10 h 12 min 19 s 124 d 06 h 36 min 58 s Moeli o ka holimo matsatsi a 207

60 kh
N/AN/AN/AN/A 14 min 54 s 29 min 49 s 59 min 39 s 2 h 29 min 07 s 4 h 58 min 15 s 9 h 56 min 31 s 1 d 00 h 51 min 18 2 01d h 42 mets 36 s 4 d 03 42                                                                                                                                                                                                            sabo} iliyopo+ iliyopo]                                             ]      36 h 10 mets 08 s 33 d 04 h 20 mets 17 s 06 d 09 h 62 mets 03 s

5
2 Likanale tse ngata
Tekanyo e Kopanetsweng ya Matshwao a fapaneng

Kenya li-module tsa ho kenya ho latela litlhoko tsa hau tse ikhethileng
MR8875 e sebelisa mofuta oa mofuta oa plugin oa mofuta oa plugin amp setup e lumellang basebelisi ho khetha yuniti ea ho kenya e loketseng sepheo sa bona sa tekanyo. Ho feta moo, ho bonolo ho fetola li-unit tsa ho kenya ka mor'a ho reka.
Yuniti ea Analog MR8905, e ka amohelang matla a phahamengtages mme e lumella tlhahiso e tobileng ea ho fihla ho 1,000 V (CAT II) kapa 600 V (CAT III), e fumaneha bakeng sa matla a phahameng.tage likopo. Ho phaella ho li-waveforms tsa hang-hang, tekanyo ea maqhubu a maqhubu a RMS e boetse e tšehetsoa.
Esita le yuniti e tloaelehileng ea ho kenya e tšehetsa tekanyo ea 1,000 V (CAT III) haeba e sebelisoa le letoto le sa tsoa ntlafatsoa la Differential Probe P9000 la li-probes tse nyenyane.
Bakeng sa tekanyo e phahameng ea kutloisiso, sebelisa Strain Unit MR8903, e nang le ts'ebetso ea 1 mV fs (bakeng sa qeto e phahameng ea 0.04 V). Tekanyo ea tlhahiso ea sensor ea minuscule e boetse e tšehetsoa.

MR8905 Yuniti ea Analog MR8905 ha e kenyelle likhoele tse kenang. Ho hlokahala theko e arohaneng ea khetho ea Connection Cable Set L4940 (× 2) le Alligator Clip Set L4935 (× 2), e nang le likotoana tse kenang lipheletsong tsa likhoele.
MR8901 P9000-01 kapa P9000-02
The Differential Probe P9000 e ka sebelisoa le Yuniti e tloaelehileng ea Analog MR8901 ho nolofalletsa matla a phahameng.tage, tekanyo ea 1,000 V (CAT III). P9000-02 e boetse e thusa ho lekanya boemo ba RMS ba lithapo tsa motlakase tsa AC.

E amohela ho kenya letsoho ka kotloloho le liteishene tse tloaelehileng tsa tlhahlobo ea kelello
MR8875 e fana ka liteishene tse peli tse tloaelehileng tsa ho kenya pulse tse lumellang ho kenya no-voltage a- le b-contacts, open collectors, kapa voltage. Lipontšo tse fetisitsoeng e le li-pulse, tse kang tsa lebelo la ho potoloha le lebelo la ho phalla, li ka lekanyetsoa (ho baloa). Sebelisa phuputso ea kelello bakeng sa maqhubu a maqhubu a on/off (logic) a kang relay le PLC waveforms. Mefuta e 'meli ea lipatlisiso tsa logic e fumaneha ho itšetlehile ka mefuta ea lipontšo (sheba leqephe la 15).

n Ts'ehetso ea mefuta e mengata ea litekanyo
(Moetso o tloaelehileng oa MR8875 o nang le bokhoni ba ho kenya letsoho. Kenyelletso ea kelello e hloka mokhoa oa boikhethelo oa ho etsa lipatlisiso.)

Tekanyo ea sepheo
Lebelo la ho potoloha

Setsi sa ho kenya
E tloaelehileng e nang le pulse input

Lethathamo la litekanyo 5000 (r/s) fs

Qeto

Sampling

Litšobotsi tsa khafetsa

1 (r/s)

10 msec (100 S/s)

N/A

Pulse Standard e nang le kakaretso e nang le pulse input

65,535 ho isa ho 3,276,750,000 e bala fs

1 palo

N/A

N/A

E ipapisitse le lipatlisiso tsa logic tse sebelisoang

Relay mabitso, voltage on/off

Logic Probe 9320-01

Max. input 50 V Threshold +1.4 V, +2.5 V, +4.0 V,

N/A

2 sec 500 nsec kapa (500 kS/s) karabo e tlase

kapa non-voltagpuisano le (e khuts'oane/e bulehile)

AC / DC voltage on/off

Tlhaloso ea lintlha MR9321-01

Ho ipapisitse le phuputso ea logic e sebelisoang, e lemoha boteng ba AC/DC voltagho fihlela ho 250 V.

N/A

2 sec 3 msec kapa (500 kS/s) karabo e tlase

Tlhokomeliso: Maqhubu a lithapo tsa motlakase, karo-karolelano ea mosebetsi le litekanyo tsa bophara ba pulse ha li tšehetsoe.

· Example ea ho rekota sebopeho sa maqhubu hang-hang le boemo ba maqhubu a RMS nakong ea nakoanatage ea phepelo ea motlakase ea AC (e sebelisa MR8905)
· Tekanyo ea nako ea likanale tse ngata e sebelisa tekanyo ea logic waveform
n Theminale ea ho kenya letsoho
Nka advantage ea tšebetso ea ho arola khafetsa, e ka beoang ho tloha lipalong tse 1 ho isa ho tse 50,000, ho nka 'malo o tobileng ho tsoa ho encoder e ntšang maqhubu a lintlha tse ngata ho latela lebelo la ho potoloha.
Methapo e 'meli ea molumo oa pulse (GND e tloaelehileng)

6
3 Touch Screen
bakeng sa Ts'ebetso e Intuitive
Sebopeho sa skrini sa touch se ntlafatsa ts'ebetso e sebetsang
Likonopo tse ho MR8875 li bolokoa bonyane ka ho sebelisa theknoloji ea sekirini sa touch. Tlhaloso e phahameng ea 8.4-inch e khanyang TFT mmala oa LCD ke sebopeho sa khetho bakeng sa ho ntlafatsa tlhahiso ka ho fana ka phihlelo e hlakileng ho feta mekhoa e tloaelehileng ea ho kenya.
Tobetsa ho khutlisetsa morao kapa ho phahamisa sebopeho sa wave
Hlahisa liforomo tsa maqhubu a pejana nakong ea ho rekota ntle le ho emisa ho lekanya ka ho ama feela litšoantšo tsa moqolo skrineng. U ka boela ua lekanya waveform ampkhanya ka ho sututsa feela ka har'a sebopeho sa maqhubu holimo (ho atometsa) kapa tlase (ho atometsa).
Ts'ebetso e tsoetseng pele ea ho bala li-cursor bakeng sa tlhahlobo ea li-multichannel
Li-cursor tse tšeletseng A, B, C, D, E, le F li teng, ha li bapisoa le li-cursor tse tloaelehileng tsa A- le B. Sebelisa li-cursor ho metha le ho bonts'a tse latelang: · A, B, C, le D: Motlakase le nako ho tloha ho li-trigger · E le F: Matla a motlakase · AB le CD cursors: Phapang ea nako le phapang e ka bang teng · EF cursors: Motlakase bokhoni
Arola skrine, pontšo ea maqephe, ho kenya letšoao la ketsahalo, le mesebetsi ea ho tlola-ea bohlokoa bakeng sa tlhahlobo e sebetsang
Arola skrine le mesebetsi ea ho bonts'a lakane e fanoa ho ts'ehetsa likanale tse ngata. Liforomo tsa ponts'o ka bomong li ka khethoa 'me kopo e ka abeloa leqephe ka leng bakeng sa tlhahlobo, ho eketsa tlhahiso. H Bakeng sa lirekoto tsa nako e telele, tag lintlha tsa bohlokoa tse nang le matšoao a liketsahalo. Ho ka beoa matšoao a fihlang ho 1000 e le hore u ka tlolela ho ona kapele bakeng sa tlhahlobo e felletseng.

7
4 Tlhahlobo ea Khomphuta
ka LAN, SD, le likhokahano tsa memori tsa USB

LAN-e lumellana WebTs'ebetso ea seva ea / FTP le phetoho ea waveform / CSV e sebelisa software e kenyellelitsoeng "Wv"
Nka advantage ea sebopeho sa 100BASE-TX LAN se hahelletsoeng ho marang-rang ka komporo: WEB Seva: Sebelisa sesebelisoa sa Web Mosebetsi oa seva ho view waveforms le ho laola MR8875 u le hole ka komporo ea hau web sebatli
Seva ea FTP: Sebelisa tšebetso ea seva ea FTP ho kopitsa data e bolokiloeng mohopolong (karete ea SD, memori ea USB, kapa memori ea polokelo e kahare) ho PC. U ka khona he view data ea binary waveform e fumanoeng ka MR8875 ho PC, kapa e fetolela data ho CSV u sebelisa Wave ea mahala.Viewer (Wv) bakeng sa tlhahlobo e tsoelang pele ho Excel. Khoasolla mofuta oa morao-rao oa WaveViewho tsoa ho HIOKI websaete ho www.hioki.com.
n Laola MR8875 u sebelisa sesebelisoa sa ho Web mosebetsi oa seva
Sebelisa e tloaelehileng web ho bona skrine ea MR8875 ho PC ea hau u sa hloke software e 'ngoe e khethehileng. Etsa litlhophiso, fumana lintlha, 'me u shebe skrine habonolo.
Tlhokomeliso: Lintlha tsa Waveform ha li khone ho fumanoa mohopolong oa ka hare nakong ea tekanyo.
n Fetisetsa data ka FTP
Kamora hore tekanyo e felile, data e fetisetsoa ka bo eona ho seva ea FTP e sebetsang ho PC. Lintlha li ka fetisetsoa ka nako eo u e batlang.

Wv skrineng mohlalaample Excel spreadsheet example
n Khoasolla data u sebelisa FTP
Lintlha tsa tekanyo ho files ho mecha ea phatlalatso ea ho rekota le memoring e ka hare e ka fumanoa ho tsoa ho PC.
Tlhokomeliso: Lintlha tsa Waveform ha li khone ho fumanoa mohopolong oa ka hare nakong ea tekanyo.
n Hokela data ho E-mail
Kamora hore tekanyo e felile, o ka romella data e hapiloeng ka bo eona joalo ka sehokelo sa lengolo-tsoibila. Lintlha li ka fetisetsoa ka nako eo u e batlang.

Boloka data memoring ya USB kapa kareteng ya SD
Memori e bonolo ea USB*1 kapa likarete tsa memori tsa SD*1 li ka sebelisoa ho
kopitsa data e bolokiloeng memoring ea polokelo ea kahare ho PC. Lintlha
e bolokiloeng kareteng ea SD ea MR8875 le eona e ka khoasolloa ho PC ka thapo ea USB.*2 *1 Sebelisa feela likarete tsa memori tsa HIOKI SD le memory stick ea USB, e leng manu-
e thehiloe ho litekanyetso tse thata tsa indasteri, bakeng sa polokelo ea nako e telele ea data ea bohlokoa. Lintlha ha li khone ho bolokoa ka nako ea nnete mohopolong oa USB. * 2 Ke data feela e bolokiloeng kareteng ea memori ea HIOKI SD e ka jarolleloang khomphuteng ka thapo ea USB.

8
5 Matla a Matla a Tlhahlobo ea Boitsebiso
Mosebetsi oa Tlhahlobo ea FFT

Ka nako e le nngwe lekanya dintho tse nne
Mosebetsi oa ho hlahloba FFT oa MR8875 ka nako e le 'ngoe o ka hlahloba liketsahalo tse' nè ka tekanyo e le 'ngoe. Ka ho etsa tlhahlobo ea FFT ea lisebelisoa tse fapaneng tsa matšoao ho tloha liteisheneng tsa 1 ho ea ho 4, hoa khoneha ho hlahloba likarolo tsa maqhubu a mocha ka mong o hlahang ka nako e le 'ngoe. Bakeng sa mohlalaample, u ka khona ka nako e le 'ngoe view sebono sa mola, sebono sa RMS, sebono sa matla, le sebono sa mohato bakeng sa ho kenya lets'oao la 1.
Ts'ebetso ea tlhahlobo ea maemo a fapaneng a litekanyo
MR8875 e na le mesebetsi ea lipalo e sebelisoang hangata nakong ea litekanyo tsa tšimo. Maqhubu a mela e sebelisoa tlhahlobong e shebaneng le sebopeho sa maqhubu ampboleng ba litude, ha matla a matla a sebelisoa tlhahlobong e shebaneng le matla, mohlalaamptekanyo ea lerata le ho thothomela. U ka khetha tšebetso ea lipalo e loketseng kopo ea hau hantle-bakeng sa mohlalaample, sebelisa tšebetso ea phetisetso bakeng sa litekanyo tse khethollang litsamaiso tsa ka hare tse ipapisitseng le litšobotsi tsa I/O.
Pontšo ea boleng bo holimo (pontšo ea lesupa)
Peak value display function e ka sebediswa ho batlana le maemo a phahameng le a sebakeng seo ebe o a bontsha. Litšobotsi tsa boleng li ka bonts'a habonolo ntle le ho sebelisa sesupa. Kaha MR8875 e boloka liforeimi tse ka bang 200 (liphetho tsa lipalo tse 200) tsa data, e tla batla ka bo eona boleng ba tlhoro hape haeba foreimi e fapaneng e khethiloe.
Ho tsamaisa tšebetso ea pontšo ea spectrum
Ts'ebetso ea ponts'o ea MR8875 e sebetsang e ka sebelisoa ho bonts'a ponahalo e fetohang ha nako e ntse e ea. Ho fihlela ho liforeimi tse 200* tsa liphetho tsa morao-rao tsa lipalo li ka bolokoa. Le hoja Hioki's MR8847 Series e tšehetsa feela ho tsamaisa pontšo ea spectrum bakeng sa mefuta e itseng ea lipalo, MR8875 e ka hlahisa pontšo ena ka mesebetsi eohle ea ho bala ea FFT. Ho feta moo, haeba foreimi e khethiloeng e fetotsoe, boleng ba cursor le bona bo ka laeloa. * Lintlha tsa Frame li bolokiloe mohopolong oa kahare oa sesebelisoa,
tlase ho hore na ponts'o e sebetsang ea spectrum e sebelisoa.
MR8875 e ka boela ea emisa pontšo ea spectrum skrineng sa eona nakong ea tekanyo. Ts'ebetso ena e lumella data ho bonoa ntle le ho kenyelletsa tlhahisoleseling e sa hlokahaleng skrineng kapa ho data. Liphetho tsohle tsa lipalo li ka hlahisoa e le data ea CSV, e ka kenngoa ts'ebetsong ea spreadsheet e kang Microsoft Excel 'me ea sebelisoa ho etsa kerafo ea mahlakore a mararo.

Example data e bonts'itsoeng le Microsoft Excel

9
Mesebetsi e mengata ea fensetere
MR8875 e fana ka kakaretso ea mesebetsi e supileng ea lifensetere, ho kenyeletsoa mefuta e fapaneng ea likhutlo li tharo le Hanning. Tshebetso ya kgutlonne e sebediswa bakeng sa tshekatsheko e shebaneng le spectrum ampboleng ba litude, ha mosebetsi oa Hanning o sebelisoa bakeng sa tlhahlobo e shebaneng le tekanyo ea karohano ea spectral ea likarolo tsa maqhubu. Ho feta moo, ka ho sebelisa fensetere ea exponential tekanyong ea tšusumetso e sebelisang hamore e ts'oarellang, sesebelisoa se thusa tlhahlobo e nepahetseng haholoanyane ka ho fokotsa likarolo tse sa hlokahaleng tsa lerata ho axis ea nako.

Mosebetsi o tsoelang pele oa ho bala

Ha o sekaseka lets'oao le fetohang ha nako e ntse e ea, palo ea lintlha tsa lipalo tsa FFT e fetoha moeli, ho thibela waveform.

ho tloha ho sekasekoe maemong ohle a nako. Ho feta moo, ho sebelisa lintlha tse ngata tsa FFT ho thibela liphetho tse lakatsehang hore li se fumanehe

hobane sebono se lekanyeditswe. MR8875 e rarolla mathata ana ka mosebetsi oa eona o tsoelang pele oa ho bala.

Palo ea ho tlola

Bakeng sa datha e sebetsanang le nako e telele, lintlha tsa lipalo li ka fetoloa ka lintlha tse ngata tsa ho tlola * yuniti e le 'ngoe.

Nako ea waveform

nako ea ho theha. Ho feta moo, lipalo tsa liforeimi tse ka bang 200

e ka etsoa ka ts'ebetso e le 'ngoe. Liphetho tsa lipalo bakeng sa linako tse fapaneng li ka ba hapeviewed ka ho fetola foreime ya dipalo, ho sa tsotelehe hore na o sebedisa spectrum display kapa skrineng se le seng.

Liphetho tsa lipalo tsa FFT

Setšoantšo sa 2

Setšoantšo sa 1
Papiso ea ho bala ho tsoelang pele

Setšoantšo sa 200

* Palo ea lintlha tsa ho tlola e ka beoa ho tloha ho 100 ho isa ho 10,000.

Ts'ebetso ea ponts'o ea overlay
Ts'ebetso ea ponts'o ea MR8875 e ka sebelisoa ho bona mefuta e fapaneng ea maqhubu a hapiloeng ho sebelisoa tekanyo e tsoelang pele ha nako e ntse e feta. Le hoja mefuta e fetileng ea Hioki e sa khone ho koahela lipalo tsa FFT, MR8875 e fana ka bokhoni bona, e ntlafatsa ponahalo ea tlhahlobo.

Lits'oants'o tsa skrine tse khahlang ka pono
Pontšo ea MR8875 e ka fetoloa ho latela sesebelisoa se haufi. Bakeng sa mohlalaampLe, ponts'o ea skrineng e le 'ngoe e ka sebelisoa ha e shebane le khokahano lipakeng tsa liteishene, athe ponts'o ea eona ea li-skrini tse 'ne e ka sebelisoa ho arola ponahalo e rarahaneng bakeng sa. viewng. Ho feta moo, liforomo tsa maqhubu a nako le maqhubu li ka bonts'oa ka holimo le ka tlase ho tse ling ha li shebane le khokahano le sebopeho sa nako e hapiloeng.

Ts'ebetso ea lipalo tsa FFT

Lintlha tsa lipalo

1,000 2,000 5,000 10,000

Mesebetsi ea lifensetere

Fesetere e khutlonnetsepa Hanning Hamming Blackman Blackman-Harris Flat top Exponential

Pontšo

Amplitude Karolo ea sebele Karolo e inahaneloang Pontšo ea boleng ba tlhōrō: boholo ba sebakeng seo, boholo ba Maqhubu a mabala (spectrogram): Methapo e 200 Karolo ea skrine: 1-/2-/4-screen, Waveform + FFT

Pontšo ea skrine e le 'ngoe

Pontšo e ts'oanang ea sebopeho sa maqhubu a axis ea nako le liphetho tsa lipalo tsa FFT

Karolelano ea mesebetsi ea Analysis
Tse ding

Hangata (bonolo) Maqhubu (bonolo) Maqhubu (ho ts'oara tlhoro)
Linear spectrum RMS spectrum Matla a spectrum Mosebetsi oa phetiso
Maqhubu a maqhubu: 1.33 mHz ho 400 kHz Max. palo ea mesebetsi e ts'oanang ka nako e le 'ngoe: 4 Kakaretso ea ho sothoa ha harmonic (THD) Boleng bo akaretsang Boleng bo akaretsang ba Window function tokiso ea matla dB scaling Palo e tsoelang pele Ho nepahala Palo Ho nepahala ha palo: 32-bit floating point, IEEE single-precision

10
Mosebetsi oa Palo oa Waveform

Palo ea nako ea sebele ea likanale
MR8875 e na le ts'ebetso e ncha ea nako ea nnete ea ho bala li-inter-channel * e o lumellang ho shebella le ho rekota liphetho tsa lipalo tse fihlang ho tse peli mojuleng o le mong oa ho kenya ha tekanyo e ntse e tsoela pele.
* Pakeng tsa liteishene tse mojuleng o tšoanang oa ho kenya feela (li-module tsa ho kenya tse tšehelitsoeng: MR8901/8902/8903)
* Lipalo lipakeng tsa liketsahalo tse fapaneng tse behiloeng ke basebelisi ho MR8902/8903 (voltage le mocheso, joalo-joalo) ha li tšehetsoe.
Lipalo tsa Waveform-dimension
Mofuta o fetileng oa firmware oa MR8875 o tšehelitse feela lipalo tse hlahisitseng litekanyetso tse kang karolelano le boleng ba RMS, empa mofuta o mocha o ka sebetsana le lipalo tse fihlang ho tse robeli ka nako e le 'ngoe, ho kenyelletsa le ts'ebetso ea arithmetic hammoho le lipalo tse fapaneng le tse ling tsa waveform-dimension.
Lipalo tsa filtara tsa dijithale

CH 1 sebopeho sa maqhubu
CH 2 sebopeho sa maqhubu
Sephetho sa palo ea nako ea sebele ea waveform
Liphetho tsa ho lekanya sebopeho se sothehileng se nang le lerata
Liphetho tsa papiso e ipapisitseng le lipalo ea waveform eo ho feto-fetoha ha maqhubu a phahameng ho hanoang ka ho e fetisa ka sefeng se tlase.

MR8875 e fana ka lipalo tse ncha tsa filthara ea dijithale * e le karolo ea khetho ea eona ea lipalo tsa ts'ebetso ea waveform, e lumellang

Leqhubu la LPF

Sekhahla sa LPF

karolo e hlokahalang ea bandwidth ea waveform e nang le lerata

ho baloa mme sephetho sa sebopeho sa maqhubu se bontšoe.

HPF waveform

Sekhahla sa HPF

* Finite impulse response (FIR) le infinite impulse response (IIR) li-filters tsa digital li fanoa.

Li-filters tse peli tsa dijithale li ka hlophisoa ka LPF (e fetisa karolo ea maqhubu a tlase feela), HPF (e fetisang karolo ea maqhubu a holimo feela), BPF (e fetisa feela karolo ea maqhubu a tlase).

Mofuta oa maqhubu a BPF

Sekhahla sa BPF

frequency bandwidth ea bophara bo itseng), kapa BEF (ho hana feela maqhubu a maqhubu

ya bophara bo itseng).

* Le ha ts'ebetso ea lipalo tsa FIR e ja nako, e ka hlahisa mefuta ea maqhubu ntle le che

ho sotha mohato. Ka lehlakoreng le leng, lipalo tsa IIR li hlahisa sephetho ka lebelo le batlang le potlakile la ho bala empa ho na le tšitiso ea mohato. Leqhubu la ho khaoha ha sefe ka 'ngoe le hlalosoa ke mosebelisi.

6 CAN Signal Input for Vehicle Testing

Rekoto e kopantseng e kopantseng ea data ea CAN le data ea 'nete joalo ka voltage, mocheso, kapa matšoao a khopameng

ECU

Fumana tlhahisoleseling joalo ka enjene RPM le lebelo la koloi

E KA kenya

Lekanya mocheso le ho thothomela ka koloing

ECU

Kenyelletso ea Analog

U ka fumana lintlha tsa CAN le data ea analog ka mokhoa oo e seng oa puisano ka ho hokahanya SP7001-95 le MR8875 le MR8904*.

*CAN FD ha e tšehetsoe

n Kerafo e CAN tlhahisoleseling le data ea analoge ka nako e le 'ngoe

Lintlha tse nkiloeng tsa CAN Lintlha tse lekantsoeng tsa analoge

Pontšo ea li-waveform ho axis ea nako e le 'ngoe

MR8875 e bonts'a leqhubu la analog le fetotsoeng ho tloha phetisong ea CAN ka nako ea nnete. Ka waveform, data ea analog joalo ka voltage, mocheso, khatello, le lintlha tse bokelletsoeng beseng ea CAN joalo ka lebelo la koloi le RPM li ka bontšoa ka nako e le 'ngoe.

Database ea CAN ea Vector e ka kenngoa ho sebelisoa software e fanoeng
Boitsebiso bo tloaelehileng ba indasteri ba CANDb® files e ka kenngoa ho software e fanoeng ea tlhophiso ho tsebahatsa matšoao a kanale a CAN. CAN melaetsa e ka ba viewed ho sebelisa molaetsa o boletsoeng ke moreki le mabitso a matšoao, hammoho le likarolo tsa boenjiniere tse ntlafalitsoeng. Kaha li-parameter tse kang mofuta oa data oa matšoao, qala hanyane, bolelele, le tatellano ea byte kaofela li hlalositsoe esale pele ho CANdb. files, basebelisi ba ka tsepamisa maikutlo mesebetsing ea bona ea ho lekanya ntle le ho hloka ho hlalosa matšoao.

11
Mohlophisi oa CAN (software e kopantsoeng)

n Tlhophiso ea mantlha ea Non-Contact CAN Sensor
Sistimi ena e hloka likarolo tse tharo: probe ea matšoao, sensor, le sebopeho sa CAN. U ka laela mefuta e behiloeng kapa ua laela likarolo tsa tsamaiso ka bonngoe.

*CAN FD ha e tšehetsoe ha e sebelisoa le MR8875 le MR8904.

Tlhahlobo ea matšoao

Sensoro

KA SEBELE

TŠEBELETSO EA SEHLOHO SP9250
TŠEBELETSO EA SEHLOHO SP9200
Beha mohlala
BA SA TŠOANENG BA KA SENSOR SP7001-95
seta dikahare SIGNAL PROBE SP9250 NON-CONTACT CAN SENSOR SP7001 CAN INTERFACE SP7150 (E kenyeletsa L9510, GND cable)

BA SA THOLAHANG BA KA SENSOR SP7001/SP7002

E KA SEBELISA SP7150
Phepelo ea matla: Matla a bese ea USB kapa Z1013
E KA SEBELISA SP7100
Phepelo ea matla: 10 ho 30 V DC kapa Z1008

BA SA TŠOANENG BA KA SENSOR SP7001-90
seta dikahare SIGNAL PROBE SP9200 NON-CONTACT CAN SENSOR SP7001 CAN INTERFACE SP7100 (E kenyeletsa L9500, GND cable)

BA SA TŠOANENG BA KA SENSOR SP7002-90
seta dikahare SIGNAL PROBE SP9200 NON-CONTACT CAN SENSOR SP7002 CAN INTERFACE SP7100 (E kenyeletsa L9500, GND cable)

E mamella mocheso o feteletseng oa tikoloho, ho thothomela, le lits'oso tsa tahlehelo ea data ka lebaka la matla otages
Litekong tsa litsela, maemo a feteletseng a tikoloho a amanang le mocheso le ho sisinyeha ka tloaelo a thatafalloa ke lisebelisoa tsa ho metha. MR8875 e na le mocheso o pharaletseng oa ho sebetsa oa -10 ° C ho ea ho 50 ° C (14 ° F ho 122 ° F) 'me e lumellana le maemo a thata a Japane bakeng sa ts'ebetso ea ho hanyetsa ho sisinyeha e sebelisoang litekong tsa likoloi (JIS DI1601). E etselitsoe ho mamella maemo a thata a ho metha ka koloing. Ha ho ka ba le matla otage ha data e ntse e rekotoa, phepelo ea motlakase e bolokoa ho sebelisoa capacitor e nang le matla a maholo ho fihlela data e ngotsoe ka botlalo ho memori ea SD kapa USB. Kotsi ea tahlehelo ea data kapa tšenyo ea ho file Sisteme e fokotsehile, 'me ka mor'a hore matla a tsosolosoe, tekanyo e ka qala hape ka bo eona.

12

Lintlha tsa mantlha (Ho nepahala ho netefalitsoe bakeng sa selemo se le seng)
Mosebetsi oa ho lekanya Ho rekota ka lebelo le phahameng

Ho fihla ho li-slots tse 4, tse ka kengoang ke mosebelisi motsoakong ofe kapa ofe ka ho hokela

karolo e kholo

[MR8901 × 4]: liteishene tsa analog tse 16 + logic e tloaelehileng ea 8 le liteishene tsa 2 pulse [MR8905 × 4]: liteishene tsa 8 tsa analog + 8 logic e tloaelehileng le liteishene tsa 2 pulse

Nomoro ea ho kenya

[MR8902 × 4]: liteishene tsa analoge tse 60 + logic e tloaelehileng ea 8 le likanale tse peli tsa pulse

li-module tse ka bang [MR8903 × 4]: liteishene tsa analog tse 16 + logic e tloaelehileng ea 8 le liteishene tsa 2 pulse

hlongoa

[MR8904 × 4]: Likou tsa 8 tsa CAN (tse hlahlobiloeng 60 analog + e hlahlobiloeng 64 logic ch) +

standard 8 logic le 2 pulse channel

* Bakeng sa likarolo tsa analoge, likanale li arotsoe ho tse ling le ho tsoa ho MR8875's

GND. Bakeng sa likou tsa li-unit tsa CAN kapa liteishene tse tloaelehileng tsa logic kapa li-standard pulse termi-

nals, likanale tsohle li na le GND e tšoanang.

Max. sampsekhahla sa ling

MR8901/MR8905: 500 kS/s (nako ya 2 s, dikanale kaofela ka nako e le nngwe) MR8902: 10 msec (ho hlahlobisisa kanale)
MR8903: 200 kS/s (nako ya 5 s, dikanale kaofela ka nako e le nngwe)ampbolelele: 200 kS/s (nako e 5)

Bokhoni ba memori ea polokelo

Kakaretso ea mantsoe a 32 Mega (katoloso ea memori: ha e eo, 8 Mega-mantsoe/mojule)
* 1 lentsoe = 2 byte, kahoo 32 Mega-mantsoe = 64 Mega-byte. * Mehopolo e ka abeloa ho latela palo ea likanale tse sebelisoang mojuleng ka mong oa ho kenya

Polokelo ea kantle Ts'ebetso ea bekapo (ho 23°C/73°F)
Li-interface

Sekotjana sa karete ea SD × 1, memori ea USB (USB 2.0 e tloaelehileng)
* FAT-16 kapa FAT-32 sebopeho ho SD kapa USB
Backup ea oache le paramethara: bonyane ts'ebetso ea "backup" ea Waveform ea lilemo tse 10: ha e eo
LAN × 1: 100BASE-TX (DHCP, DNS e tšehelitsoe, seva ea FTP / moreki, web seva, romella lengolo-tsoibila, taolo ea taelo)
Sets'oants'o sa USB mini-B se amohelang × 1 (setting le methatso ka
litaelo tsa puisano, fetisetsa data ho tloha karete ea SD ho ea ho PC)
Sets'oants'o sa USB mini-A × 2 (thupa ea memori ea USB, toeba ea USB,
USB keyboard)

Lihokelo tsa taolo ea kantle

External trigger input, trigger output, kantle sampho kenya letsoho, ho kenya letsoho × 2, tlhahiso ea kantle × 3, tlhahiso ea kantle × 2

Phepelo ea matla a kantle

Mela e meraro, +5 V, 2 A kakaretso ea tlhahiso, Tloaelehileng GND le 'mele GND
* Patlisiso e fapaneng ea 9322 e ke ke ea sebelisoa

Mocheso o sebetsang le mongobo (ha ho condensation)

Mocheso: -10°C ho ea ho 40°C (14°F ho ea ho 104°F), 80% rh kapa ka tlaase ho 40°C ho ea ho 45°C (104°F ho isa 113°F), 60% rh kapa ka tlaase ho 45°C ho ya ho 50°C (113°F ho ya ho 122°F), 50% rh kapa ka tlase ho moo
Ha e tsamaisoa ke pakete ea betri: 0°C ho isa 40°C (32°F ho isa 104°F), 80% rh kapa ka tlaase ho moo Ha u tjhaja pakete ea betri: 10°C ho isa ho 40°C (50°F ho isa ho 104°F ), 80% rh kapa ka tlase Ho boloka: -20°C ho isa ho 40°C (-4°F ho isa 104°F), 80% rh kapa ka tlase ho moo
40°C ho ya ho 45°C (104°F ho ya ho 113°F), 60% rh kapa ka tlase ho 45°C ho ya ho 50°C (113°F ho ya ho 122°F), 50% rh kapa ka tlase Polokelo ya pakete ya Betri: -20 °C ho isa ho 40°C (-4°F ho isa ho 104°F), 80% rh kapa ka tlase ho moo

Litekanyetso tse sebetsang

Tšireletseho: EN61010-1, EMC: EN61326, EN61000-3-2, EN61000-3-3

Ho lumellana le litekanyetso

Anti-vibration: JIS D1601: 1995 5.3 (1) (e lumellana le Sehlopha sa 1: koloi ea baeti, boemo: sehlopha sa A)

Phepelo ea motlakase

Adapter ea AC Z1002: 100 ho ea ho 240 V AC (50/60 Hz) Battery Pack Z1003: 7.2 V DC Nako e tsoelang pele ea ts'ebetso: hora e le 'ngoe e khantšitsoe ka morao (adapter ea AC e bohlokoa ha e sebelisoa hammoho le betri pakete)
Motlakase oa DC: 10 ho isa ho 28 V DC (ka kopo ikopanye le mofani oa hau oa Hioki bakeng sa
thapo ya kgokelo)

Mosebetsi oa ho tjhaja Nako ea ho tjhaja: hoo e ka bang. Lihora tse 3 (ho sebelisa adaptara ea AC le yuniti e kholo

(ka 23°C/73°F)

ho tjhaja Battery Pack Z1003)

Tšebeliso ea matla

Ha o sebelisa adaptara ea AC Z1002, kapa phepelo ea motlakase ea kantle ea DC: 56 VA Ha o sebelisa pakete ea betri: 36 VA

Litekanyo le boima
Lisebelisoa tse fanoeng
Pontšo

Hoo e ka bang. 298W × 224H × 84D mm (11.73W × 8.82H × 3.31D in.), 2.4 kg
(84.7 oz.), (ntle le li-module tsa ho kenya letsoho le pakete ea betri)
Example litlhophiso: 2.75 kg (97.0 oz., ntle le lisebelisoa tsa ho kenya letsoho le ho kenyelletsa le betri pakete), 3.47 kg (122.4 oz., ho kenyelletsa MR8901 × 4 le betri pakete)
Bukana ea Litaelo × 1, Measurement Guide × 1, Adapter ea AC Z1002 × 1, Letlapa la Tšireletso × 1, Cable ea USB × 1, Leqhoa la Mahetla × 1, Application Disk (Wave viewer Wv, tafole ea litaelo tsa puisano, CAN Editor) × 1

Hlahisa mofuta oa Litlhophiso tsa skrine

8.4 inch SVGA-TFT mmala LCD (800 × 600 dots, touch screen), (nako axis 25
div × molumotage axis 20 div, XY waveform 20 div × 20 div)
Sesepa sa Waveform se arohaneng (1, 2, kapa 4), XY 1 & XY 2 skrini, nako ea axis + XY waveform skrine, pontšo ea lakane (leqephe "ALL", leqephe 1 ho isa ho 4
khethang ho tsona)

· Pontšo ea waveform

· Pontšo ea waveform le gauge ka nako e le 'ngoe

Mefuta ea skrineng

·Pontšo ea waveform, gauge, le litlhophiso ka nako e le 'ngoe ·Pontšo ea sephetho sa maqhubu le lipalo tsa lipalo

·Waveform le A/B, C/D, E/F cursor values ​​tse hlahang ka nako e le nngwe

·Sebopeho sa maqhubu ka nako e le 'ngoe le ponts'o ea boleng hang hang

Waveform monitor Bona waveform ntle le ho rekota (seta skrineng, e emetse skrini sa trigger)

Sehlahlobi sa boleng ba nako ea sebele

Boleng ba likanale tsohle bo ka shejoa nakong ea ho metha
(theko ea hang-hang, boleng ba karolelano, boleng ba PP, boholo. boleng, boleng bo fokolang)

Bontša mesebetsi

·Moqolo oa Waveform (tsamaea ka morao ho graph e bonts'ang mokhoa ho
view maqhubu a fetileng leha o ntse o rekota)
· Ho kenya letshwao la ketsahalo le ho tlola mesebetsi (ho fihla ho matshwao a 1000) ·Waveform inversion (e ntle/e mpe) ·Cursor bala (sebelisa A/B/C/D/E/F/cursors) · Vernier display (e ntle amptokiso ea thuto)
* Atometso ea Waveform (e arola skrine ka kotloloho; e tšehetsa sebopeho sa wave
kgolo le pontsho ka kakaretso)
·Mokhabiso o koaheletsoeng oa waveform (khetha ho tloha, o koahele holim'a tekanyo e 'ngoe le e 'ngoe, le
koanela ka nako e khethiloeng ke mosebelisi)
* Nalane ea Waveform (ho ka khethoa le ho bonts'oa li-data tse 16 tse fetileng.)

Mosebetsi oa ho lekanya (Ho rekota ka lebelo le phahameng)

Mokhahlelo oa nako

200 s/div, 500 s/div, 1 ms/div ho isa ho 500 ms/div, 1 s/div ho isa ho 5 mets/div
21 ranges, kantle sampling (max. 200 kS/s) Nako ea ho rekota ka nako ea sebele ea ho boloka: 2 s/S (ho fihla ho likanale tse 2), 5 s/S (ho fihla ho likanale tse 8), 10 s/S (ho fihla ho likanale tse 16) , 20 s/S (ho fihla ho likanale tse 30), 50 s/S (ho fihla ho likanale tse 64), 100 s/S (ha ho moeli palo ea
likanale tse sebelisoang)

Ho nepahala ha axis ea nako ±0.0005%
Qeto ea axis ea nako lintlha tse 100 / div
Ho rekota bolelele ba 25 ho isa ho 20,000 div *1 *2, 50,000 div *3, kapa e ka lokisoang ho tloha ho 5 (ka MR8901 × 4, logic ho isa ho 80,000 div *3 ho 1 div increments le pulse inputs off) *1 4 ch/module, *2 2 ch/mojule, *3 1 ch/mojule

Katoloso ea sebopeho sa maqhubu / khatello

Mokhahlelo oa nako: × 10 ho × 2 kapa × 1, × 1/2 ho isa × 1/50,000 Voltage axis: × 100 ho × 2 kapa × 1, × 1/2 ho × 1/10 Litlhophiso tsa moeli tse ka holimo le tse tlaase, kapa boemo ba boemo

Pele ho qala

Qetella nako qalong: data ea pre-trigger e ka rekotoa bakeng sa nako e behiloeng ka mehato e tlohang ho 0% ho isa ho 100% ea bolelele ba ho rekota.

Kamora ho qala

Qetella nako ha u emisa: data ea post-trigger e ka rekotoa bakeng sa nako e behiloeng ka mehato e tlohang ho 0% ho isa ho 40% ea bolelele ba ho rekota.

Boloka data ka nako ea nnete

Ho bulela / ho tima hoa khoneha (ho boloka nako ea sebele kapa ho boloka ka mokhoa o itekanetseng) Mosebetsi: liforomo tsa maqhubu li bolokoa e le data ea binary ho karete ea memori ea SD nako le nako. (Tlhokomeliso: e ke ke ea boloka ka nako ea sebele memoring ea USB.
Sebelisa feela likarete tsa memori tsa SD tse rekisoang ke Hioki.)
Ho boloka loop e sa feleng: e ncha file e hlakola e kgolohadi file ha karete ya memori ya SD e fela hanyane. (Tlhokomeliso: hlakola files feela ho bolokoa
pheta mokhoa oa ho qala.)
Poloko e tlwaelehileng: ho boloka ho ema ha karete ya memori ya SD e tletse

Boloka data ka otho

Khetha ho "tima", data ea waveform (binary kapa CSV), liphetho tsa lipalo, le data ea setšoantšo (e hatisitsoeng BMP kapa PNG) Mosebetsi: data e bolokoa ho karete ea memori ea SD kapa memori ea USB hang ka mor'a hore bolelele ba ho rekota bo behiloe. fumanehile. Ho boloka loop e sa feleng: e ncha file e hlakola e kgolohadi file ha karete ya memori ya SD kapa bokgoni ba memori ba USB bo sebetsa bokgutshwane Poloko e tlwaelehileng: ho boloka ho ema ha karete ya memori ya SD kapa memori ya USB e tletse.

Tšireletso ea data

Ha ho ka ba le matla otage nakong ea ho boloka mecha ea litaba ea polokelo, the file e koetsoe ebe motlakase oa koaloa.
(Tlhokomeliso: ts'ebetso ena e lumelloa metsotso e 15 ka mor'a hore motlakase o bulele.)

E kenya data ho tsoa ho media

· Lintlha tsa binary tse bolokiloeng kareteng ea memori ea SD kapa memori ea USB li ka hopoloa ke memori ea polokelo ea kahare ea MR8875 · Lintlha tsa Waveform tse bolokiloeng ka nako ea nnete kareteng ea memori ea SD li ka jarolloa ho qala sebakeng se boletsoeng ho fihlela boholo ba memori ea polokelo. .

Karolo ea memori N/A

Qetella mesebetsi

Mokhoa

Single, pheta

Nako

Qala, emisa, 'me u qale le ho emisa (maemo a fapaneng a trigger a ka hlophisoa hore a qale
mme ema)

Qala mehloli

·Mohloli oa mohloli o ka khethoang bakeng sa kanale ka 'ngoe. (Ho matha ka bolokolohi ha tsohle
mehloli ea li-trigger e timme)
·Analog input: khetha likanale tse fihlang ho 4 bakeng sa mojule ka mong ·Liphetho tsa lipalo tsa Inter-channel: W1-1 ho W4-2 ·Logic input: LA1 ho LA4, LB1 ho LB2 (4 channel x 2 probes), CAN L1 ho 16 ( bakeng sa Yuniti ka nngwe ya MR8904 CAN). Lithahasello tsa mohlala li ka hlophisoa bakeng sa mohloli o mong le o mong oa mohloli o ka holimo.
·Pulse input: P1, P2 (liteishene tse 2)
·Kenyelletso ea kantle: lets'oao la ho kenya letsoho ho terminal ea "trigger" ea kantle ·Logic LE/OR ea mehloli eohle ·Ho qobelleha ho kenya tšebetsong: ke ntho e tlang pele ho mohloding ofe kapa ofe o mong oa ho thahasellisa.

Mefuta e qalang (analogue, pulse)

· Boemo: trigger e sebelisoa ha set voltage phahama kapa e wele. · Fesetere: e beha meeli e holimo le e tlase ea boemo ba trigger

Mefuta e qalang (logic)
Mefuta ea ho qala (kenyo ea kantle)

· Paterone ea logic: settable to 1, 0, or × for each logic probes · Maemo a trigger (AND/OR) a ka beoa lipakeng tsa likanale tsa ho kenya logic ho probe ka 'ngoe.
Ho ka khethoa ho phahama kapa ho oa (max. allowable input voltage 10 V DC) Ho phahama: trigger e sebelisoa ha e phahama ho tloha "Low" (0 ho 0.8 V) ho "Phahameng" (2.5 ho 10 V) Ho oa: ho sebelisoa trigger ha ho theoha "Phahameng" (2.5 ho 10 V. ) ho isa ho "Low" (0 ho isa ho 0.8 V) kapa ho bokhuts'oane. Sefefo sa ka ntle sa "trigger" le "pulse" bophara: Ha sefahla sa kantle se timiloe: nako e phahameng ke 1 ms kapa ho feta, 'me nako e tlase ke 2 s kapa ka tlase Ha mochini o sebetsang ka ntle: nako e phahameng ke 2.5 ms kapa ho feta, 'me nako e tlase ke 2.5 ms kapa ka tlase

Qetella qeto ea boemo

· Analog: 0.1% fs (fs = 20 div) (Hlokomela: le CAN Unit MR8904,
qeto e feto-fetoha ho latela bolelele bo hlalositsoeng ke CAN.)
Khokahano ea lebelo: 0.002% fs, ·Palo ea ho potoloha ha lebelo: 0.02% fs (fs = 20 div)

Hlahisa sefahla se hlahisang tlhahiso

Beha ka palo ea samptlase (lintlha tse 10 ho isa ho tse 1000, kapa ho tima)
·Bula tlhahiso ea drainage (ka 5 voltage output, active low) ·Output voltage: 4.0 ho 5.0 V (boemo bo phahameng), 0 ho 0.5 V (boemo bo tlase) ·Output pulse wide: levelable selectable or pulse Level: sampnako × (palo ea data ka mor'a ho tlosa e le 'ngoe) kapa ho feta (2 s kapa ho feta) Pulse: 2 ms ±10%

13

Mesebetsi ea lipalo

· Lipalo tse fihlang ho tse 2 mojuleng ka 'ngoe li ka etsoa ka nako e le 'ngoe-

hantle.

· Li-module tse ka khonehang tsa lipalo: Yuniti ea Analog MR8901, Moqtage/

Temp Unit MR8902, Strain Unit MR8903

Inter-time inter-

* Lipalo tsa likanale li lekantsoe mojuleng o le mong.

lipalo tsa kanale

* Litlhophiso tsa ho lekanya le ho hlahloba li tla koaloa haeba kanale ea tsona e na le lipalo tse behiloeng ho eona.

* Liphetho tsa lipalo li ka fokotsoa.

* Lipalo lipakeng tsa liketsahalo tse fapaneng tse behiloeng ke basebelisi ho MR8902 le

MR8903 ha e tšehetsoe.

· Lipalo: ho eketsa, ho tlosa, ho atisa

Palo ea lipalo

· Lipalo tse fihlang ho tse 8 li ka etsoa ka nako e le 'ngoe · Sebaka sa memori ea lipalo: mohopolo o ka hare.
boleng ba mme, nako, maqhubu, nako ea ho phahama, nako ea ho oa, boleng ba sebaka, boleng ba sebaka sa XY, ho kheloha ho tloaelehileng, nako ea boemo bo boletsoeng, boemo ba nako e boletsoeng, bophara ba sekhahla, tekanyo ea mosebetsi, palo ea lebelo, phapang ea nako,
phapano ya mophato, dipalo tsa maemo a hodimo, tse tlase, dipalo. Liphetho tsa lipalo li ka bolokoa kareteng ea memori ea SD kapa memori ea USB. + Palo ea lipalo: khetha ho tsoa ho data eohle ea litekanyo kapa lipakeng tsa li-cursor tsa A/B kapa C/D · Ho boloka ka boiketsetso ho sephetho sa lipalo ka sebopeho sa CSV ho karete ea SD kapa memori ea USB.

Lipalo tsa waveform

· Ho ka etsoa lipalo tse fihlang ho tse 8 ka nako e le 'ngoe. · Sebaka sa memori ea lipalo: mohopolo oa kahare · Lipalo: lipalo tsa mantlha, litekanyetso tse felletseng, li-exponents, li-logarithm tse tloaelehileng, metso ea lisekoere, phapang (taelo ea pele le ea bobeli),
likarolo (taelo ea 1 le ea 2), litekanyetso tse tsamaeang, li-axis tse tsamaeang ka nako, ts'ebetso ea trigonometric (SIN, COS, TAN), ts'ebetso e fapaneng ea trigonometric (ASIN, ACOS, ATAN), ts'ebetso ea filthara ea FIR, ts'ebetso ea filthara ea IIR, litekanyetso tse tloaelehileng, boholo. boleng, bonyane ba boleng, boemo ka nako · Lethathamo la lipalo: lintlha tsohle tsa tekanyo; libaka tse lipakeng tsa li-cursor tsa A/B le C/D li ka khethoa.

FFT lipalo

· Ho ka etsoa lipalo tse ka bang 4 ka nako e le 'ngoe. · Sebaka sa memori ea lipalo: mohopolo oa kahare · Mekhoa ea lipalo: e le 'ngoe, pheta-pheta · Palo ea lintlha: 1,000 ho isa ho 10,000 · Palo ea ho tlola: ka boiketsetso, 100 ho isa ho 10,000
* E ka seta feela ha mokhoa oa ho bala o le "Pheta".
· Fensetere ya tshebetso: fenstere ya kgutlonne, Hanning, Hamming, Blackman, Blackman-Harris, flat top, exponential · Karolelano: off, e bonolo karolelano, indexed average, peak hold · Matšeliso: ha ho letho, matla, karolelano · Peak value display: off, local boleng bo ka holimo, boleng bo ka holimo ho fetisisa · Mokhoa oa ho hlahloba: ho tima, spectrum ea linear, spectrum ea RMS, spectrum ea matla, ts'ebetso ea phetisetso, matla a marang-rang, ts'ebetso ea momahano, mohato spectrum · Sekala sa pontšo: sekala sa mola, sekala sa log

Tlhahlobo

Sephetho sa tlhahlobo ea lipalo: GO/STOP (e nang le tlhahiso e bulehileng ea 5 V)

Mesebetsi e meng

Kantle sampling

Kenyelletso e kholo: ho fihla ho 10 V DC Nako e phahameng ea ho kenya: 200 kHz
Boemo ba lets'oao la ho kenya: boemo bo phahameng 2.5 ho 10 V, Boemo bo tlase 0 ho 0.8 V, Pulse bophara bo phahameng kapa tlase 2.5 s kapa ho feta

Tse ding

·Ho lekanya, ho kenya maikutlo, khetha ho tloha ho nako, letsatsi le palo ea data bakeng sa pontšo ea axis e otlolohileng, senotlolo sa linotlolo ·Beep sound on/off ·Auto range setting (seta ka ho iketsa sampsekhahla sa ling le
ampsebaka sa thuto)
*Tšoara boemo ba ho qala (ha motlakase o sitisoa nakong ea ho rekota,
tekanyo e tla qala ka bo eona ka mor'a hore motlakase o khutlisetsoe)
*Seta ka boits'oaro (e kenya litlhophiso ka bo eona files bolokoa mohopolong o ka hare kapa
karete ea SD)
·Boloka boemo ba ho seta mohopolong oa ka hare (ho fihla ho maemo a 6) ·Poloko ea data ka letsoho

Karolo ea ho kenya letsoho

Che ea liteishene

Likanale tse 2, terminal ea mofuta oa push-button, e sa arohanngoa (e tloaelehileng GND
ka yuniti e kholo)

Mokhoa

Ho potoloha, ho kopanya

Mesebetsi ea litekanyo

*Potoloho e arotsoeng: palo e le 1 ho isa ho 50,000 (nomoro ea potoloho: palo ea likhahla
ka ho potoloha; kopanyo: palo ea likhahla ka palo)
·Nako: khetha ho tloha ho “ho qala ho bala ka nako e qalang” kapa “maqalong a tekanyo”. ·Mokhoa oa ho kopanya: khetha ho tsoa ho "kopano ho tloha qalong ea tekanyo" kapa "boleng ba hang-hang sebakeng se seng le se seng.ampnako ea ling” ·Ts'ebetso ea ho kopanya ho khaphatseha: khetha "boleng bo khutlela ho 0 'me ho bala ho tsoelapele" kapa "boemo ba ho phalla bo ntse bo tsoela pele"

Foromo ea ho kenya

·No-voltage `a' lebitso (hangata e bulehileng), no-voltage `b' con-
masene (hangata e khuts'oane), moqokelli ea bulehileng kapa voltage input ·Ho hana ho kenya: 1.1 M

Max. ho kenya letsoho 0 V ho 50 V DC (max. voltage pakeng tsa li-terminals tse ke keng tsa baka tšenyo)

Max. rated voltage lipakeng tsa likanale

Ha e arohane (GND e tloaelehileng e nang le yuniti e kholo)

Max. rated voltage to earth Ha e arotsoe (GND e tloaelehileng e nang le yuniti e kholo)

Boemo ba ho lemoha

4 V: (holimo: ho feta 4.0 V, tlase: 0 ho 1.5 V) 1 V: (holimo: ho feta 1.0 V, tlase: 0 ho 0.5 V)

Nako ea ho kenya letsoho

Ha sefa se timiloe: 200 s kapa ho feta (nako e phahameng le e tlase e tlameha ho ba bonyane 100 s) E buletsoe: 100 ms kapa ho feta (nako e phahameng le e tlase e tlameha ho ba bonyane 50 ms)

Sefe ea Moepa

Bala ho ea holimo, kapa u bale ho tloha moeling o theohang sefefo sa thibelo ea Chatter (ho tima/ho tima switchable)

Setting range Resolution

Lekhalo la litekanyo

2,500 c/div 25 kc/div

1 c/LSB 10 c/LSB

0 ho 65,535 c 0 ho 655,350 c

250 kc/div 100 c/LSB

0 ho isa ho 6,553,500 c

5 Mc/div

2 kc/LSB

0 ho isa ho 131,070,000 c

125 Mc/div Potoloho: 250 [r/s]/div

50 kc/LSB 1 [r/s]/LSB

0 ho ea ho 3,276,750,000 0 5,000 XNUMX c XNUMX ho isa ho XNUMX XNUMX [r/s]

n Nako e phahameng ea ho rekota mohopolong oa polokelo ea kahare
* MR8875 e khona ho boloka likanale tse fihlang ho tse 16 tsa data mojuleng ka mong. Kerafo e ka tlase e bonts'a likanale tse 16 hobane e shebile polokelo ka unit. Leha ho le joalo, likarolo tsohle tse sebelisoang li tla latela nako e lekanang ea ho rekota.
* Menahano e hahelletsoeng, le li-pulses P1 le P2 e 'ngoe le e' ngoe e sebelisa matla a lekanang le kanale e le 'ngoe ea analoge.

n Ponahalo le boholo ba kantle
Li-slots tsa mojule oa ho kenya (bakeng sa li-module tse fihlang ho tse 4)

84 limilimithara

Palo ea likanale tse tla sebelisoa

9 ho ea ho 16 likh

5 ho ea ho 8 likh

3 ho isa ho 4 likh

2 kh

1 kh

Mokhahlelo oa nako

Sampnako ea ling

5,000 div

10,000 div

20,000 div 40,000 div 80,000 div

200 s / div

2 s

1 s

2 s

4 s

8 s

16 s

500 s / div

5 s

2.5 s

5 s

10 s

20 s

40 s

1 ms/div 10 mts

5 s

10 s

20 s

40 s

1 mets 20s

2 ms/div 20 mts

10 s

20 s

40 s

1 mets 20s

2 mets 40s

5 ms/div 50 mts

25 s

50 s

1 mets 40s

3 mets 20s

6 mets 40s

10 ms/div 100 mts

50 s

1 mets 40s

3 mets 20s

6 mets 40s

13 mets 20s

20 ms/div 200 mts

1 mets 40s

3 mets 20s

6 mets 40s

13 mets 20s

26 mets 40s

50 ms/div 500 mts

4 mets 10s

8 mets 20s

16 mets 40s

33 mets 20 s 1 h 06 mets 40 s

100 ms/div 1 ms

8 mets 20s

16 mets 40s

33 mets 20 s 1 h 06 mets 40 s 2 h 13 mets 20s

200 ms/div 2 ms

16 mets 40s

33 mets 20 s 1 h 06 mets 40 s 2 h 13 mets 20 s 4 h 26 mets 40 s

500 ms/div 5 ms

41 mets 40 s 1 h 23 mets 20 s 2 h 46 mets 40 s 5 h 33 mets 20 s 11 h 06 mets 40 s

1 s/div 10 ms 1 h 23 mets 20 s 2 h 46 mets 40 s 5 h 33 mets 20 s 11 h 06 mets 40 s 22 h 13 mets 20 s

2 s/div 20 ms 2 h 46 mets 40 s 5 h 33 mets 20 s 11 h 06 mets 40 s 22 h 13 mets 20 s 1 d 20 h 26 mets 40 s

5 s/div 50 ms 6 h 56 mets 40 s 13 h 53 mets 20 s 1 d 03 h 46 mets 40 s 2 d 07 h 33 mets 20 s 4 d 15 h 06 mets 40 s

10 s/div 100 ms 13 h 53 min

30 s/div 300 ms 1 d 17 h 40 mets 3 d 11 h 20 mets 6 d 22 h 40 mets 13 d 21 h 20 mets 27 d 18 h 40 mets

50 s/div 500 ms 2 d 21 h 26 mets 40 s 5 d 18 h 53 mets 20 s 11 d 13 h 46 mets 40 s 23 d 03 h 33 mets 20 s 46 d 07 06 s 40 mets

60 s/div 600 ms 3 d 11 h 20 mets 6 d 22 h 40 mets 13 d 21 h 20 mets 27 d 18 h 40 mets 55 d 13 h 20 mets

100 s / div 1.0 d 5 h 18 mil53 20 h 11 mums 13 mm

2 mets/div 1.2 s 6 d 22 h 40 min

5 mets/div 3.0 s 17 d 08 h 40 min

Phepelo ea matla a kantle
(Mehala e 3, +5 V tlhahiso, GND e tloaelehileng le 'mele oa GND)

Li-terminals tsa logic (4 ch × 2 probes) LAN le USB

224 limilimithara

Bakeng sa matla a adaptara ea AC Z1002, kapa matla a DC (10 V ho isa ho 28 V)

298 limilimithara

Theminale ea taolo ea kantle
Setšoantšo sa karete ea SD

14

n Litlhaloso tsa likhetho (tse rekisoang ka thoko)

Setšoantšo sa MR8902

plug-in slot bakeng sa li-module tsa ho kenya

Tekanyo ea sepheo

Mojule oa ho kenya

Lekhalo la litekanyo

Qeto

Moqtage
Hajoale RMS AC voltage
Mocheso (thermocouple)

Setsi sa Analoji MR8901

100 mV fs ho isa ho 200 V fs

4 μV

Setsi sa Analoji MR8905

10 V fs ho 1000 V fs

400 μV

Moqtage/Temp Unit MR8902 10 mV fs to 100 V fs

0.5 μV

Sehlopha sa mathata MR8903

1 mV fs ho isa ho 20 mV fs

0.04 μV

Yuniti ea Analog MR8901 + sensor e eketsehileng ea hajoale

E ipapisitse le li-sensor tsa hajoale tse sebelisoang * Li-sensor tse ling tsa hajoale li hloka 1/1250 div e arohaneng.
phepelo ea motlakase

Setsi sa Analoji MR8905

10 V rms fs ho 700 V rms fs

400 μV

Yuniti ea Analog MR8901 + Phapang e eketsehileng Probe 9322

100 V rms ho 1 kV rms

1/1250 div

200°C fs ho isa ho 2000°C fs Moqtage/Temp Unit MR8902 * Litekanyetso tsa moeli tse holimo le tse tlase li ipapisitse le 0.01°C
thermocouple e sebelisoang

Ho sotha, khatello ea kelello Unit MR8903

400 µ ho isa ho 20,000 µ fs

0.016µ

Hlahloba matšoao a CAN CAN Unit MR8904
*CAN FD ha e tšehetsoe

Relay mabitso, voltage on/off

Logic Probe 9320-01

AC / DC voltage on/off Logic Probe MR9321-01

2 likou/yuniti
* Ho fihla ho liteishene tsa analoge tse 15, e 'ngoe le e 'ngoe e lekana le lets'oao la analoge la 16-bit
* Ho fihla ho liteishene tse 16 tsa logic, e 'ngoe le e 'ngoe e lekana le lets'oao la 1-bit
E ipapisitse le liphuputso tsa logic tse sebelisoang
* Max. input 50 V, threshold +1.4/+2.5/+4.0 V * Ikopanye le lekgutshwanyane/e bulehileng, le se nang matlatage

N/AN/A

E ipapisitse le liphuputso tsa logic tse sebelisoang
* Ho fihla ho 250 V AC/DC, e lemoha ho phela kapa ho se phele

N/A

Thermocouples

Ho beha mekhahlelo
(sekala se felletseng = 20 div)

Qeto

Mekhahlelo ea litekanyo

Ho nepahala

10 °C / div

0.01°C

-100°C ho isa ka tlase ho 0°C 0°C ho isa ho 200°C

±0.8°C ±0.6°C

K

50°C

0.05°C

-200°C ho ea ho -100°C -100°C ho isa ho 1000°C

±1.5°C ±0.8°C

100°C

0.1°C

-200°C ho ea ho -100°C -100°C ho isa ho 1350°C

±1.5°C ±0.8°C

10 °C / div

0.01°C

-100°C ho isa ka tlase ho 0°C 0°C ho isa ho 200°C

±0.8°C ±0.6°C

J

50°C

0.05°C

-200°C ho ea ho -100°C -100°C ho isa ho 1000°C

±1.0°C ±0.8°C

100°C

0.1°C

-200°C ho ea ho -100°C -100°C ho isa ho 1200°C

±1.5°C ±0.8°C

10 °C / div

0.01°C

-100°C ho isa ka tlase ho 0°C 0°C ho isa ho 200°C

±0.8°C ±0.6°C

-200 ° C ho ea ho -100 ° C

±1.5°C

50°C

0.05°C

-100°C ho ea ka tlaase ho 0°C

±0.8°C

E

0°C ho isa ho 1000°C

±0.6°C

-200 ° C ho ea ho -100 ° C

±1.5°C

100°C

0.1°C

-100°C ho ea ka tlaase ho 0°C

±0.8°C

0°C ho isa ho 1000°C

±0.6°C

10 °C / div

0.01°C

-100°C ho isa ka tlase ho 0°C 0°C ho isa ho 200°C

±0.8°C ±0.6°C

-200 ° C ho ea ho -100 ° C

±1.5°C

50°C

0.05°C

-100°C ho ea ka tlaase ho 0°C

±0.8°C

T

0°C ho isa ho 400°C

±0.6°C

-200 ° C ho ea ho -100 ° C

±1.5°C

100 °C

0.1°C

-100°C ho ea ka tlaase ho 0°C

±0.8°C

0°C ho isa ho 400°C

±0.6°C

Tlhokomeliso: ho nepahala ha thermocouple ho fumanoa ka ho kenyelletsa puseletso e nepahetseng ea puseletso ea ± 0.5 ° C.

Litekanyo, boima ba 'mele: hoo e ka bang. 119.5W × 18.8H × 151.5D limilimithara (4.70W × 0.74H × 5.96D in.), hoo e ka bang. 180 g (6.3 oz.) lisebelisoa: Ha ho letho

Setsi sa Analog MR8901 (ho nepahala ho 23 ± 5 ° C [73 ± 9 ° F], 20 ho 80% rh ka mor'a metsotso ea 30 ea nako ea ho futhumatsa le ho fetola zero; ho nepahala ho tiisitsoe bakeng sa selemo sa 1)

Mesebetsi

No. ea likanale: 4, bakeng sa voltaglitekanyo

Lihokelo tsa ho kenya

Sehokelo se ikhethileng sa BNC (ho hanyetsa ho kenya 1 M, bokhoni ba ho kenya 10 pF) Max. rated voltage ho lefats'e: 100 V AC rms kapa 100 V DC (keno e arohane le yuniti e kholo, max. vol.tage e ka sebelisoang lipakeng tsa chan-
nels le chassis, le lipakeng tsa liteishene tsa ho kenya ntle le tšenyo)

5 mV ho isa ho 10 V/div, mekhahlelo e 11, sekala se felletseng: 20 div Measurement range * AC voltage ka lekanyetsoa / ea bontšoa: ho fihlela ho 140 V rms ho × 1/2 amptsebo
compression, empa e lekanyelitsoe ho 100 V rms ke eona max. rated voltage lefatšeng

Sefepi se tlase

Sefahla sa phallo e tlase: 5 Hz, 50 Hz, 500 Hz, 5 kHz, se tima

Qeto

1/1250 ea tekanyo ea tekanyo (e sebelisa 16-bit A/D converter)

Phahameng ka ho fetisisa sampsekhahla sa bolelele 500 kS/s (ka nako e le 'ngoe sampbua ka har'a likanale tse 4)

Ho nepahala

± 0.5% ea sekala se felletseng (e nang le filthara 5 Hz, ho kenyelelitsoe ho nepahala ha boemo ba zero)

Litšobotsi tsa maqhubu DC ho isa ho 100 kHz, -3 dB

Khokahano ea ho kenya

DC/GND

Max. ho kenya letsoho 150 V DC (max. voltage e ka sebelisoang ho pholletsa le lithakhisa ntle le tšenyo)

Litekanyo, boima ba 'mele: hoo e ka bang. 119.5W × 18.8H × 184.8D mm (4.70W × 0.74H × 7.28D in.), hoo e ka bang. 190 g (6.7 oz.) lisebelisoa: ferrite clamp × 2

Moqtage / Temp Unit MR8902 (ho nepahala ho 23 ± 5 ° C [73 ± 9 ° F], 20 ho 80% rh ka mor'a metsotso ea 30 ea nako ea ho futhumatsa le ho fetola zero; ho nepahala ho tiisitsoe bakeng sa selemo sa 1)

Mesebetsi

No. ea likanale: 15, bakeng sa voltagTekanyo ea e/thempereichara (e khethiloeng bakeng sa mocha ka mong)

Lihokelo tsa ho kenya

Moqtage/thermocouple input: push-button terminal bophara ba terata bo khothalelitsoeng: terata e le 'ngoe 0.32 mm ho isa ho 0.65 limilimithara, terata e kholehileng 0.08 ho isa ho 0.32 mm2 (diameter ea terata ea conductor min. 0.12
limilimithara), AWG 28 ho isa ho 22 Ho hanyetsa ho kenya: 1 M Max. rated voltage ho lefats'e: 100 V AC rms kapa 100 V DC (keno e arohane le yuniti e kholo, max. vol.tage e ka sebelisoang pakeng tsa
liteishene tse kenang le chassis, le lipakeng tsa liteishene tse kenang ntle le tšenyo)

500 V/div ho isa ho 5 V/div, mekhahlelo e 9, sekala se felletseng: 20 div * The AC hang-hang

Moqtage

voltagwaveform e ke ke ea lekanngoa ka lebaka la butle samplebelo la mang.

methati ea litekanyo Qeto: 1/1000 ea sebaka sa litekanyo (ho sebelisa 16-bit A/D converter)

Ho nepahala: ±0.1% fs (e nang le filthara ea dijithale e butsoitseng, ho nepahala ha boemo ba zero)

Boemo ba tekanyo ea mocheso

Matšeliso a mateano a litšupiso: kahare/kantle (e khethiloeng) Ho lemoha terata e robehileng ea Thermocouple: butle/e tima (khetho e sebetsa ho yuniti kaofela)
Mofuta oa Thermocouple: K, J, E, T, N, R, S, B, WRe5-26 * Bakeng sa mefuta ea litekanyo tsa thermocouple, qeto le ho nepahala, sheba lethathamo la lintlha tse ka tlase.

Sefe ea dijithale

50 Hz, 60 Hz, kapa ho tima

Sekhahla sa ntlafatso ea data

10 ms (e felisitsoe, e timiloe, e tima) 20 ms (e tima sefe, e bone hore ha e chele) 500 ms (e butsoe ka filthara, sekhahla sa ho hlasimolla data: kapele) e tloaelehileng)

Max. ho kenya letsoho 100 V DC (max. voltage e ka sebelisoang ho pholletsa le lithapo tsa ho kenya ntle le tšenyo) 100 V DC (max. voltage e ka sebelisoang ho likanale tse kentsoeng ntle le tšenyo.)
Max. ho kenya letsoho Likanale li sirelelitsoe ke li-relay tsa semiconductor. Haeba voltagho pholletsa le likanale tsa ho kenya tse fetang litlhaloso tsa sehlahisoa li sebelisoa lipakeng tsa ho kenya
likanale, joalo ka ho phahama ha lehalima, ho ka baka ho hloleha ha potoloho e khutšoane
ea semiconductor relay. Ka kopo etsa molumo o joalotage ha e sebelisoe.

Litekanyo, boima ba 'mele: hoo e ka bang. 119.5W × 18.8H × 151.5D limilimithara (4.70W × 0.74H × 5.96D in.), hoo e ka bang. 173 g (6.1 oz.) lisebelisoa: thapo ea phetoho × 2 (Sehokelo se hokehang: TAJIMI PRC03-12A10-7M10.5)

Sehlopha sa mathata MR8903

(ho nepahala ho 23 ± 5 ° C [73 ±9 ° F], 20 ho 80% rh ka mor'a metsotso e 30 ea nako ea ho futhumatsa le autobalancing; ho nepahala ho tiiselitsoe bakeng sa selemo sa 1)

Mesebetsi

No. ea likanale: 4, bakeng sa voltaglitekanyo tsa e/strain (e khethiloeng bakeng sa mocha o mong le o mong, ho leka-lekanya ka elektroniki, ho leka-lekanya maemo ka har'a ± 10,000
V, ±10,000 )

Lihokelo tsa ho kenya

Lehlakore la lihlopha: "HDR-EC14LFDTG2-SLE +" e entsoeng ke Honda Tsushin Kogyo Co., Ltd. Japan Via cable conversion, "PRC03-12A10-7M10.5" e entsoeng ke Tajimi Electronics Co., Ltd. Japan Max. rated voltage ho lefats'e: 33 V AC rms kapa 70 V DC (keno e arohane le yuniti e kholo, max. vol.tage ka sebelisoang lipakeng tsa mocha oa ho kenya le chassis, le lipakeng tsa liteishene tsa ho kenya ntle le tšenyo)

Transducer e loketseng

Strain gauge converter, borokho bo hanyetsang: 120 ho 1 k, borokho ba voltage: 2 V ± 0.05 V, Sekhahla sa lekhalo: 2.0

Ho hanyetsa ho kenya

Ho feta 1 M

Moqtagmekhahlelo ea litekanyo

50 V/div ho isa ho 1,000 V/div, mekhahlelo e 5, sekala se felletseng: 20 div Ho nepahala: ±0.5% fs + 4 V (ho 50 V/div feela), mekhahlelo e meng ±0.5% fs
(ka mor'a ho leka-lekanya ka boits'oaro, ka sefe ea 5 Hz, ho kenyeletsoa ho nepahala ha boemo ba zero)

Mekhahlelo ea ho lekanya khatello

20 / div ho 1,000 / div, 6 ranges, tekanyo e feletseng: 20 div Ho nepahala: ± 0.5% fs + 4 (ho 20, 50 / div), mekhahlelo e meng ± 0.5% fs
(ka mor'a ho leka-lekanya ka boits'oaro, ka sefe ea 5 Hz, ho kenyeletsoa ho nepahala ha boemo ba zero)

Sefepi se tlase

Sefahla sa phallo e tlase: 5 Hz, 10 Hz, 100 Hz, 1 kHz, se tima

Qeto

1/1250 ea tekanyo ea tekanyo (e sebelisa 16-bit A/D converter)

Phahameng ka ho fetisisa sampsekhahla sa bolelele 200 kS/s (ka nako e le 'ngoe sampbua ka har'a likanale tse 4)

Litšobotsi tsa maqhubu DC ho 20 kHz, +1/-3 dB

Max. ho kenya letsoho 10 V DC (max. voltage e ka sebelisoang ho pholletsa le lithakhisa ntle le tšenyo)

Litekanyo, boima ba 'mele: hoo e ka bang. 119.5W × 18.8H × 151.5D limilimithara (4.70W × 0.74H × 5.96D in.), hoo e ka bang. 185 g (6.5 oz.), lisebelisoa: ha ho letho

CAN Unit MR8904* *CAN FD ha e tšehetsoe

Input CAN port Standards Interface ACK phetiso Terminator Baud rate E hlahlobiloe mocha oa tlhahiso ea matšoao
Sebopeho sa pontšo
Sehlahisoa sa ID
Nako ea karabo Fetisa molaetsa oa CAN

Palo ea likou: 2, sehokelo: D-sub male 9 pin × 2
ISO 11898 CAN 2.0b, ISO 11898-1, ISO 11898-2, ISO 11898-3, SAE J2411 Selectable: high-speed CAN, low-speed CAN, kapa CAN ea terata e le 'ngoe ka boema-kepe (e nang le transceiver e lumellanang e hahiloeng) Bulela / tima bakeng sa ho fetisetsa ACK bakeng sa ho amohela lets'oao la CAN le MR8904
Bulela/tima ka litaelo, khanyetso e hahelletsoeng ea 120 ±10 50 kbps ho isa ho 1 Mbps ho "High-speed", 10 kbps ho isa ho 125 kbps ho "Lowspeed", 10 kbps ho isa ho 83.3 kbps ho "Single-wire"
Ho fihla ho liteishene tse 15 tsa analoge e 'ngoe le e 'ngoe e lekanang le lets'oao la analoge la 16-bit Ho fihla ho liteishene tse 16 tsa logic e ngoe le e ngoe e lekana le lets'oao la 1-bit.
Letšoao la 1-bit: 1 channel ea logic, kapa 1 channel ea analog 1-bit ho 16-bit signal: 1 channel ea analog 17-bit ho 32-bit signal: 2 channel ea analog * Ha e khone ho sebetsana le matšoao ho feta 32-bit
Mothamo oa "H" oa "H" ho mocha o khethiloeng oa logic ha o amohela letšoao le behiloeng la ID * Bophara ba phallo: 50 s ka tlase ho 5 ms/div nako axis, 1 sampnako e telele ho feta 10 ms/div time axis
Nakong ea 200s ka mor'a ho fumana molaetsa oa CAN ka ho feletseng
E ka fetisetsa molaetsa oa CAN sete ho bese ea CAN ho boema-kepe bo bong

n Litlhaloso tsa likhetho (tse rekisoang ka thoko)

n Litlhaloso tsa mohlophisi oa CAN (software e kopantsoeng le MR8904) (Litekanyetso tse latelang

*CAN FD ha e tšehetsoe

ke tsa MR8904 e le 'ngoe)

Tikoloho ya tshebetso

Windows 8/8.1 (32-bit/64-bit) Windows 10 (32-bit/64-bit): ts'ebetso e netefalitsoe

CAN litlhaloso tsa litlhophiso

ID ea molaetsa oa CAN, Boemo ba ho qala, bolelele ba data Taelo ea data: U/L (Motorola), L/U (Motorola), L/U (Intel) Khoutu: e sa saena, e saennoe 1, e saennoe 2

KA db file

·Laola CAN db file · Fetolela ho “.cdf” file
·Ngolisa lethathamong (ho hlophisa ha ho fumanehe), data ea 33-bit le holimo ha e tšehetsoe
· Fetolela taelo ea data: Motorola (CANdb file) ho ea ho U/L (Motorola) ·Sokolla khouto file (CANdb file) ho isa ho tse saenneng tse 2, IEEE phaphamala kapa habeli (CANdb file) ha e tshehetswe ·Fetola lebitso la letshwao (CANdb file) ho ea ho label ·Fetola maikutlo (CANdb file) ho lebitso la letshwao

Litlhophiso tsa lenane la ngoliso

CAN tlhophiso ea boema-kepe: boema-kepe ba 1, boema-kepe ba 2, nomoro ea ntho: 1 ho isa ho 200 Ho beha ponts'o ea moeli o kaholimo / o tlase skrineng sa MR8875

·Sehokelo: lebelo le phahameng, lebelo le tlase, terata e le 'ngoe

· Terminator: e butswe/e tima (ho buletswe e kentswe ka “High-speed” feela)

E KA KHOA ho buisana · ACK: on/off

litlhophiso

Sekhahla sa baud: AUTO (e lumelletsoe ho ACK e tima feela)

50 kbps ho isa ho 1 Mbps ho "High-speed", 10 kbps ho isa ho 125 kbps ho "Low-

lebelo", 10 kbps ho isa ho 83.3 kbps ho "terata e le 'ngoe"

Litlhophiso tsa mocha oa analog

Palo ea likanale: 15
·Abela tlhaloso lethathamong la ngoliso tlas'a mocha oa 16-bit ho isa ho 1 ·Abela tlhaloso lethathamong la ngoliso bakeng sa likanale tse 17 ho isa ho tse 32 ho isa ho tse 2.

Litlhophiso tsa mecha ea kelello

Palo ea likanale: 16
·Abela tlhaloso lethathamong la ngoliso tlas'a 16-bit, le bit position ·Abela tlhaloso lethathamong la ngoliso ho ID trigger

Litlhophiso tsa phetiso

Nomoro ea phetisetso, mokhoa, boema-kepe ba tlhahiso ea CAN, mofuta oa foreimi, ID ea phetisetso, bolelele ba phetisetso, data ea phetisetso, ID ea karabo,
nako ea phetiso

Puisano le MR8875

Batla MR8875 ka USB, lenane la ngoliso, tlhophiso ea puisano ea CAN, litlhophiso tsa liteishene tsa analog, litlhophiso tsa mecha ea litaba, phetisetso.
ho seta litaba, joalo-joalo.

Mesebetsi ea khatiso

Lethathamo la ngoliso, lintho tsohle tsa litlhophiso tsa puisano tsa CAN, lenane la analog le abetsoeng, lenane la logic le abetsoeng, lintho tsohle tsa litlhophiso tsa phetisetso.

Boloka ditshebetso

CAN tlhaloso ya data: binary form, “.cdf” extension, convertible to software for Hioki Model 8910 Letsatsi la ho beha (kahare kaofela ntle le data ya tlhaloso ya CAN): binary form, “.ces” extension

Litekanyo, boima ba 'mele: hoo e ka bang. 119.5W × 18.8H × 151.5D limilimithara (4.70W × 0.74H × 5.96D in.), hoo e ka bang. 185 g (6.5 oz.), lisebelisoa: ha ho letho

Setsi sa Analog MR8905 (ho nepahala ho 23 ± 5 ° C [73 ± 9 ° F], 20 ho 80% rh ka mor'a metsotso e 30 ea nako ea ho futhumatsa le ho fetola zero; ho nepahala ho tiisitsoe bakeng sa selemo sa 1)

Mesebetsi

No. ea likanale: 2, e fetohang lipakeng tsa boleng ba hang-hang le litekanyetso tsa AC RMS

Lihokelo tsa ho kenya

Banana connector (input impedance 4 M, input capacitance less than 1 pF) Max. rated voltage lefatšeng: CAT II 1000 V AC & DC, CAT III 600 V AC & DC (kaha ho kenya letsoho ho arohane le yuniti e kholo, max. vol.tage e ka sebelisoang lipakeng tsa mocha oa ho kenya le chassis, le lipakeng tsa chan-
nels ntle le tšenyo)

500 mV/div ho isa ho 50 V/div, mekhahlelo e 7, sekala se felletseng: 20 div Measurer range *Bophahamo bo bonts'ang matla a ACtage ke 700 Vrms ha u sebelisa 1/2 compres-
sion ya axis e emeng.

Sefepi se tlase

5 Hz, 50 Hz, 500 Hz, 5 kHz, ho theoha

Qeto

1/1250 ea tekanyo ea tekanyo (e sebelisa 16-bit A/D converter)

Phahameng ka ho fetisisa sampsekhahla sa bolelele 500 kS/s (ka nako e le 'ngoe sampbua ka har'a likanale tse 2)

Ho nepahala

±0.5% fs (e nang le filthara ea 5 Hz)

Tekanyo ea RMS

Ho nepahala ha RMS: ± 1.5% fs (ho tloha ho 30 Hz ho ea ho empa e sa kenyelelitse 1 kHz, sine wave input) kapa ± 3% fs (1 kHz ho 10 kHz, sine wave input) Nako ea karabelo: 300 ms (sefa se tima, se nyoloha ho tloha 0% ho isa ho 90% fs) kapa 600 ms
(sefa, ho tloha ho 100% ho isa ho 10% fs) Crest factor 2

Litšobotsi tsa maqhubu DC ho isa ho 100 kHz, -3 dB

Khokahano ea ho kenya

DC/AC-RMS/GND

Max. ho kenya letsoho

1000 V DC, 700 V AC (max. voltage e ka sebelisoang ho pholletsa le lithakhisa ntle le tšenyo)

Bolelele ba thapo le boima ba 'mele: mohala o moholo oa yuniti 1.5 m (4.92 ft.), karolo ea ho kenya mohala oa 1 m (3.28 ft.), hoo e ka bang. 320 g (11.3 oz.) Tlhokomeliso: Plaka e lehlakoreng la yuniti ea MR9321-01 e fapane le MR9321.

LOGIC PROBE MR9321-01

Mosebetsi

Ho sibolloa ha lets'oao la AC kapa la DC bakeng sa ho rekota boemo bo phahameng / tlase Ho ka sebelisoa hape bakeng sa ho lemoha tšitiso ea mohala oa motlakase.

Kenyeletso

Liteishene tse 4 (tse arohaneng pakeng tsa yuniti le likanale), ho fetoha ha maemo a holimo / a tlase Ho hanyetsa Kenyelletso: 100 k kapa ho feta (boemo bo phahameng), 30 k kapa ho feta (boemo bo tlase)

Tlhahiso (H).

170 ho 250 V AC, ±DC 70 ho 250 V (bophahamo bo phahameng) 60 ho 150 V AC, ± DC 20 ho 150 V (mofuta o tlaase)

Tlhahiso (L).

0 ho 30 V AC, ±DC 0 ho 43 V (bophahamo bo phahameng) 0 ho 10 V AC, ± DC 0 ho 15 V (mofuta o tlaase)

Nako ea ho arabela

Maqhubu a holimo ke 1 ms max., moeli o theohelang 3 ms max. (ka lebelo le phahameng ho 200 V
DC, sebaka se tlase ho 100 V DC)

Max. kenyelletso e lumellehang 250 Vrms (e phahameng), 150 Vrms (mofuta o tlase) (matla a holimotage ka ba joalo
e kentsoeng ka har'a lithakhisa ntle le tšenyo)

15

Bolelele ba thapo le boima ba 'mele: mohala o moholo oa yuniti 1.5 m (4.92 ft.), thapo ea karolo ea ho kenya 30 cm (0.98 ft.), hoo e ka bang. 150 g (5.3 oz.) Tlhokomeliso: plug-side plug ea 9320-01 e fapane le 9320.

LOGIC PROBE 9320-01

Mosebetsi

Ho fumanoa ha voltaglets'oao la e kapa lets'oao la ho ikopanya le relay bakeng sa ho rekota boemo bo phahameng / bo tlase

Kenyeletso

Liteishene tse 4 (tse tloaelehileng lipakeng tsa yuniti le likanale), kenyelletso ea dijithale / ea puisano, e fetohang (ho kenya letsoho ho ka bona matšoao a bokelli ba bulehileng)
Khanyetso ea ho kenya: 1 M (ka ho kenya dijithale, 0 ho +5 V) 500 k kapa ho feta (ka kenyo ya dijithale, +5 V ho ya +50 V)
Khanyetso ea ho hula: 2 k (ho kenya letsoho: ho huloa ka hare ho fihla ho +5 V)

Digital input threshold 1.4 V, 2.5 V, 4.0 V

Khokahano ea ho lemoha lintho tse kenang

1.4 V: 1.5 k kapa ho feta (e bulehileng) le 500 kapa ka tlaase (e khutšoanyane) 2.5 V: 3.5 k kapa holimo (e bulehileng) le 1.5 k kapa ka tlaase (e khutšoanyane) 4.0 V: 25 k kapa holimo (e bulehileng) le 8 k kapa ka tlaase (e khuts'oane)

Bophara ba pulse bo bonoang ke 500 ns kapa ho feta

Max. ho kenya letsoho

0 ho + 50 V DC (boholo ba voltage e ka sebelisoang ho pholletsa le lithakhisa tsa ho kenya ntle le
tshenyo)

Bolelele le boima ba thapo: 70 cm (2.30 ft.), lehlakore la tlhahiso: 1.5 m (4.92 ft.), 170 g (6.0 oz.)

FAPANENG PROBE P9000

(ho nepahala ho netefalitsoe bakeng sa selemo sa 1)

P9000-01: bakeng sa tlhahiso ea tlhahlobo ea waveform, thepa ea maqhubu: DC ho isa ho 100

kHz, -3 dB

Mekhoa ea ho lekanya

P9000-02: li-switches pakeng tsa tlhahiso ea ho shebella ha waveform le tlhahiso ea boleng bo sebetsang ba AC

Thepa ea maqhubu a maqhubu a maqhubu: DC ho 100 kHz, -3 dB, maqhubu a mokhoa oa RMS

thepa: 30 Hz ho 10 kHz, nako ea karabelo: tsoha 300 ms, oela 600 ms

Karolelano ea karohano

E fetoha lipakeng tsa 1000:1 le 100:1

Ho nepahala ha tlhahiso ea DC ±0.5% fs (fs = 1.0 V, karo-karolelano ea 1000: 1), (fs = 3.5 V, karohano ea 100: 1)

Boleng bo sebetsang bo lekana- ± 1% fs (30 Hz ho isa tlase ho 1 kHz, sine wave), ± 3% fs (1 kHz ho isa ho 10 kHz, leqhubu la ho nepahala ha sinementation)

Khanyetso/bokgoni ba ho kenya HL: 10.5 M, 5 pF kapa ka tlase ho moo (ho 100 kHz) Boholo ba matla a ho kenyatage 1000 V AC, DC

Boholo bo lekantsoeng voltage fatše

1000 V AC, DC (CAT III)

Boemo ba mocheso o sebetsang

-40°C ho isa ho 80°C (-40°F ho isa ho 176°F)

Phepelo ea motlakase

(1) AC adaptara Z1008 (100 ho 240 V AC, 50/60 Hz), 6 VA (ho kenyeletsoa adaptara ea AC), 0.9 VA (unit e kholo feela) (2) Matla a bese ea USB (5 V DC, USB-microB terminal) , 0.8 VA (3) Mohloli oa matla a kantle 2.7 V ho isa ho 15 V DC, 1 VA

Lisebelisoa

Buka ea litaelo × 1, sekotwana sa alligator × 2, mokotla o jereng × 1

BA SA TŠOANENG BA KA SENSOR SP7001, SP7002

Mokhoa oa ho lemoha

Ho fumanwa ha matshwao a capacitive-coupled Ha ho dikgokelo tse se nang letho

Lithapo tse bonoang

Lithapo tse lumellanang le AVS/AVSS, Bophara ba ka ntle: 1.2 mm (0.05 in) ho isa ho 2.0 mm (0.08 in)

Nomoro ea likanale 1 CH (SP7150), 2 CH (SP7100)

E lumellana le commu- SP7001: CAN, CAN FD 125 kbit/s to 3 Mbit/s nications speeds SP7002: CAN 125 kbit/s to 1 Mbit/s

Nako eohle ea ho lieha

130 ns (e tloaelehileng)

CAN terminal resistance 60 (e tloaelehileng), e hahiloeng

Sehokedi sa pontsho ya letshwao la D-sub 9-pin female

Lisebelisoa tse kenyellelitsoeng (SP7150)

Buka ea ho Qala ka Potlako × 1, Litlhokomelo tsa Ts'ebetso × 1, Spiral tube (bakeng sa ho lokisa
thapo ya matla) ×1, thapo ya USB L9510 ×1, thapo ya kgokelo ya fatshe ×1, sekotwana sa Alligator ×1

*CAN FD ha e tšehetsoe ha e sebelisoa le MR8875 le MR8904.

Ho sekaseka data komporong

WAVE PROCESSOR 9335 (khetho)
· Pontšo ea waveform le lipalo
· Mosebetsi oa khatiso

Leqhubu Viewer (Wv) Software (software e kopantsoeng)
· Netefatso ea li-waveforms tsa data tse binary komporong · Ho boloka data ka sebopeho sa CSV bakeng sa ho fetisetsoa ho spreadsheet
software

N 9335 lintlha tsa kemiso (khetho)

Tikoloho ea ts'ebetso Windows 10/ 8/7 (32/64-bit)

Mesebetsi

· Pontšo: ponts'o ea waveform, ponts'o ea XY, ts'ebetso ea cursor, joalo-joalo. File loading: lifomate tsa data tse balehang (.MEM, .REC, .RMS, .POW) E ka baloang ka ho fetesisa file: kholo ka ho fetisisa file e ka bolokehang ka ho tshehetswa
lisebelisoa (tse tšehelitsoeng file boholo bo ka fokotsoa ka lebaka la komporo ea hau
tikoloho ea ts'ebetso.) · Phetoho ea data: ho fetolela ho sebopeho sa CSV, phetoho ea batch ea tse ngata files

· Mosebetsi oa khatiso: ho boloka setšoantšo sa khatiso files (ka tšehetso bakeng sa ntlafatso

Hatisa

metafile [EMF] sebopeho) · Sebopeho sa khatiso: khetha ho se kenngoe lithaeleng, lithaele tse 2 ho isa ho tse 16, mela e 2 ho isa ho e 16, X/Y 1 ho isa ho.

4 lithaele, peleview & kopi e tšoarehang

n Leqhubu ViewLitlhaloso tsa er (Wv) (software e kopantsoeng) Tikoloho ea ts'ebetso Windows 10/8/7 (32/64-bit)

Mesebetsi

· Pontšo e bonolo ea waveform file
· Fetolela binary data file ho sebopeho sa mongolo, CSV · Pontšo ea ho Scrolla, holisa/fokotsa, tlolela ho cursor/ho qalisa boemo, jj.

Li-module tsa ho kenya

Cable e kenyang (A)

Cable e kenyang (B)

Likhetho tsa MR8875 ka botlalo
* Kenya ka ho kenya yuniti e kholo. E ka nkeloa sebaka ke mosebelisi. Lithapo tse kentsoeng ha li fanoe.
TŠEBELETSO EA ANALOGO MR8901
4ch, leqtage lekanya, DC ho isa ho 100 kHz bandwidth
TLHOKOMELOTAGE/TEMP UNIT MR8902
15ch, leqtagtekanyo ea e, tekanyo ea thermocouple
TLHOKOMELISO yuniti MR8903
4ch, leqtagtekanyo ea e, strain gauge converter input, thapo ea phetoho e kenyelelitsoe
E KA SEBELISA MR8904
Ho fihla ho liteishene tse 15 tsa analog e 'ngoe le e 'ngoe e lekanang le lets'oao la analoge la 16-bit, le liteishene tse fihlang ho tse 16 tse lekanang le lets'oao la 1-bit *CAN FD ha e tšehetsoe.
TŠEBELETSO EA ANALOGO MR8905
Likanale tse 2, molumo o phahamengtage DC/RMS input, DC ho ya ho 100 kHz band

Moqtage e lekanyelitsoe ho litlhaloso tsa li-module tsa ho kenya tse sebelisoang

E khothalelitsoe

ALLIGATOR CLIP L9790-01
Sete e khubelu / e ntšo e khomarela lipheletsong tsa likhoele L9790

KHOPO KHOPO L9790
Flexible 4.1 mm (0.16 in.) dia., cable e lumellang ho fihla ho 600
V ho kenya. 1.8 m (5.91 ft.) bolelele
* Sekotwana sa ho qetela se rekisoa ka thoko.

Ikopanye le PIN 9790-03
Sete e khubelu / e ntšo e khomarela lipheletsong tsa likhoele L9790
GRABBER CLIP 9790-02
Sete e khubelu / e ntšo e khomarela lipheletsong tsa likhoele L9790 * Ha sekotwana sena se khomaretsoe qetellong ea L9790, ho kenya letsoho ho lekanyelitsoe ho CAT II 300 V. Red / black set

L9790

L9790-01

9790-03

9790-02

Moqtage e lekanyelitsoe ho litlhaloso tsa li-module tsa ho kenya tse sebelisoang

KHOPO EA KHOPO L9198 KHOPO EA L9197

5.0 mm (0.20 in.) dia., cable e dumellang 5.0 mm (0.20 in) dia., cable e dumellang

bakeng sa ho kenya 300 V. 1.7 m (5.58 ft.) ho fihla ho 600 V input, 1.8 m (5.91 ft) bolelele,

bolelele, sekotwana se senyane sa alligator

likotoana tse kholo tsa alligator li bokelloa ka bongata

* Moqolotage input ka banana terminals limited by the voltage litlhaloso tsa yuniti e fapaneng ea ho kenya.

CONNECTION CABLE SET L4940 Plaka ea Banana, bolelele ba 1.5 m (4.92 ft.), e khubelu/e ntšo, 1 e 'ngoe le e 'ngoe

EXTENSION CABLE L4931 E eketsa bolelele ba thapo ka plug ea banana, bolelele ba 1.5 m (4.92 ft.)

LIEKETSENG SEKOLI
L4935 E hokela ntlheng ea thapo ea polaka ea banana, CAT IV 600 V, CAT III 1000 V

BESE BAR CLIP
L4936 E hokela ntlheng ea thapo ea plug ea banana, CAT III 600 V

MAKANETE
ADAPTER L4937 E hokela ntlheng ea thapo ea polaka ea banana, CAT III 1000 V

GRABBER CLIP L9243 E hokela ntlheng ea thapo e hokelang, bolelele ba 185 mm (7.28 in.), CAT II 1000 V

Moqtage to ground e ka har'a lintlha tsa sehlahisoa sena. Mohloli o arohaneng oa matla o boetse oa hlokahala.

FAPANENG PROBE FAPANENG PROBE AC ADAPTER

P9000-01

P9000-02

Z1008

Waveform feela, ho fihla ho 1 kV AC/ Waveform/RMS boleng switch- 100 V AC ho 240 V

DC, bophara ba sehlopha ho fihla ho 100 kHz e khona, ho fihla ho 1 kV AC/DC, sehlopha sa AC

bophara ho fihlela ho 100 kHz

BA SA TŠOANENG BA KA SENSOR SP7001-95
Sensor e ka behang leihlo CAN holim'a thapo *CAN FD ha e tšehetsoe ha e sebelisoa le MR8875 le MR8904.
KA KHABELLA 9713-01
Bakeng sa MR8904 (MR8875), 8910, e sa sebetsoang ka lehlakoreng le leng, bolelele ba 1.8 m (5.91 ft.)
KHOPO KHOPO L9217
Cord e kentse likhokahanyo tsa BNC lipheletsong ka bobeli, bolelele ba 1.6 m (5.25 ft.)
PHETOHO EA 9199
Ho fumana lehlakoreng la banana, tlhahiso ea BNC terminal

Nyeoe

Phepelo ea motlakase

Cable e kenyang (E)

Software ea PC

Mecha ea litaba ea polokelo

Tekanyo ea lets'oao le utloahalang

*Motlakase o arohaneng (CT9555) oa hlokahala bakeng sa ho sebelisa sensor ea hona joale e nepahetseng haholo. * Ke li-sensor tse nang le li-terminals tsa ME15W (12-pin) feela tse ka hokahanngoang le CT9555. *The Conversion Cable CT9900 e fumanehang ka thoko e ea hlokahala molemong oa ho sebelisa sensor e nang le terminal ea PL23 (10-pin).
POWER SUPPLY for Current Sensors SENSOR UNIT CT9555 1ch, e nang le tlhahiso ea waveform
KHOPO EA KHOPO L9217 Cord e kentse likhokahanyo tsa BNC lipheletsong ka bobeli, bolelele ba 1.6 m (5.25 ft.)
PL23 (10-pin) ho isa ho ME15W (12-pin) phetoho CONVERSION CABLE CT9900
E fetolela terminal ea PL23 (10-pin) ho terminal ea ME15W (12-pin).

Mohlala: MEMORY HiCORDER MR8875

Nomoro ea mohlala (khoutu ea odara)

MR8875

(Max. 16 to 60ch, 32 MWWord memory, main unit only)

*Ha e khone ho sebetsa o le mong, o tlameha ho kenya likhetho tse ling

* Ho ka sebelisoa feela mefuta e menyenyane ea li-terminal.

LOGIC PROBE 9320-01
4-channel mofuta, bakeng sa voltagE/Lets'oao la ho ikopanya le ho lemoha/ho tima (bophara ba pulse 500 ns kapa ho feta, minia-
mofuta oa terminal)

LOGIC PROBE MR9321-01
Likanale tse 4 tse ikhethileng, ho bona / ho tima AC / DC voltage (mofuta oa terminal o monyane)

SD MEMORY CARD 2GB Z4001
2 GB bokhoni
SD MEMORY CARD Z4003
8 GB bokhoni

Sebelisa feela CF Cards kapa li-drive tsa USB tse rekisoang ke HIOKI. Ho lumellana le ts'ebetso ha li netefatsoe bakeng sa likarete tsa CF kapa lithupa tsa memori tsa USB tse entsoeng ke bahlahisi ba bang. U kanna oa sitoa ho bala kapa ho boloka data ho tse joalo
likarete.

USB DRIVE Z4006

16 GB, bophelo bo bolelele, ts'epo e phahameng ea SLC flash memory

TS'ESOA TS'OETSA 9335
Fetolela data, hatisa le ho bontša lifomo tsa maqhubu
LAN CABLE 9642
Cable ea Ethernet e otlolohileng, e fanoang ka thapo e otlolohileng ho ea sefapanong, bolelele ba 5 m (16.41 ft.)
FlexPro (software ea motho oa boraro)
Software e tsoetseng pele ea tlhahlobo le tlhahiso ea data ea Memory HiCorder Lintlha tse ling: Weisang GmbH (Jeremane) http://www.weisang.com/
Moqtage to ground e ka har'a lintlha tsa sehlahisoa sena. Mohloli o arohaneng oa matla o boetse oa hlokahala.
FAPANENG PROBE 9322
Ho fihla ho 1 kV AC kapa 2 kV DC, maqhubu a maqhubu a bophara ho fihla ho 10 MHz
AC ADAPTER 9418-15
100 V AC ho isa ho 240 V AC.
*Z1002 ke sesebelisoa se kopantsoeng

Ho fihla ho 1000 A (ho nepahala ho phahameng) *ME15W (12-pin) mofuta oa terminal
Li-sensor tsa morao-rao tse nepahetseng ka ho fetesisa, ho shebella maqhubu ho tloha ho DC ho ea ho AC e sothehileng
AC/DC CURRENT SENSOR CT6862-05, 1 MHz, 50 A AC/DC CURRENT SENSOR CT6863-05, 500 kHz, 200 A
Li-sensor tsa morao-rao tse nepahetseng ka ho fetesisa, ho shebella maqhubu ho tloha ho DC ho ea ho AC e sothehileng
AC/DC CURRENT SENSOR CT6872, 10 MHz, 50 A AC/DC CURRENT SENSOR CT6873, 10 MHz, 200 A
Li-sensor tsa morao-rao tse nepahetseng ka ho fetesisa, ho shebella maqhubu ho tloha ho DC ho ea ho AC e sothehileng
AC/DC CURRENT SENSOR CT6904A, 4 MHz, 500 A
Li-sensor tsa morao-rao tse nepahetseng ka ho fetesisa, ho shebella maqhubu ho tloha ho DC ho ea ho AC e sothehileng
AC/DC CURRENT SENSOR CT6875A, 2 MHz, 500 A AC/DC CURRENT SENSOR CT6876A, 1.5 MHz, 1000 A
Ela hloko mekhoa ea maqhubu ho tloha DC ho ea ho AC AC/DC CURRENT PROBE CT6841A, 2 MHz, 20 A AC/DC CURRENT PROBE CT6843A, 700 kHz, 200 A
Ela hloko mefuta ea maqhubu a AC (ha e khone ho shebella DC) CLAMP HO SENSOR 9272-05, 100 kHz, 200 A
Ela hloko mekhoa ea maqhubu ho tloha ho DC ho ea ho AC AC/DC CURRENT PROBE CT6844A, 500 kHz, 500 A AC/DC CURRENT PROBE CT6845A, 200 kHz, 500 A AC/DC CURRENT PROBE CT6846 kHz, A100, A1000
Litlhokomeliso ha u hokela sensor ea hona joale e nepahetseng haholo ho Memory HiCorder Ho hokela ho MR8875 · Sensor ea hona joale e nepahetseng haholo (ME15W) + CT9555 + BNC cable MR8875 · Sensor e phahameng e nepahetseng ea hona joale (PL23) + CT9900 + CT9555 + BNC8875 cable MRXNUMX
Mefuta e meng ea sensor ea hona joale
MR8875 e ka sebelisoa le mefuta e fapaneng ea li-sensor tsa hajoale le li-probes. Bakeng sa lintlha, bona lintlha tsa sehlahisoa ho Hioki's websebaka.
CM7290 (e fumanehang ka thoko) ea hlokahala molemong oa ho sebelisa li-sensor tsena tsa hajoale.
100 A ho 2000 A (lebelo le mahareng) AC/DC CURRENT SENSOR CT7631
DC, 1 Hz ho isa ho 10 kHz, 100 A
AC/DC AUTO ZERO CURRENT SENSOR CT7731
DC, 1 Hz ho isa ho 5 kHz, 100 A
AC/DC CURRENT SENSOR CT7636
DC, 1 Hz ho isa ho 10 kHz, 600 A
AC/DC AUTO ZERO CURRENT SENSOR CT7736
DC, 1 Hz ho isa ho 5 kHz, 600 A
AC/DC CURRENT SENSOR CT7642
DC, 1 Hz ho isa ho 10 kHz, 2,000 A
AC/DC AUTO ZERO CURRENT SENSOR CT7742
DC, 1 Hz ho isa ho 5 kHz, 2,000 A
BONTŠA UNIT CM7290
E fana ka ts'ebetso ea tekanyo, pontšo, le tlhahiso ha e sebelisoa le CT7000s.
BONTŠA UNIT CM7291
ka thekenoloji ya waelese ya Bluetooth® e hahelletsweng ka hare
SEHLAHLWA KHOPO L9095
Hokela ho terminal ea BNC, bolelele ba 1.5 m (4.92 ft.)

AC ADAPTER Z1002
Bakeng sa yuniti e kholo, 100 V AC ho isa ho 240 V AC

PAKA EA BETHER Z1003
NiMH, litefiso ha e ntse e kentsoe yuniti e kholo

HO JARA NYEOE C1004
E kenyelletsa compartment bakeng sa likhetho, mofuta oa kutu e thata, e boetse e loketse ho tsamaisa MR8875
* Bakeng sa litšupiso feela. Ka kopo, reka sebakeng sa heno.
Thermocouple

500 A ho 5000 A *Bakeng sa lithapo tsa motlakase tsa khoebo, 50/60 Hz
CLAMP HO PROBE 9018-50
Litšobotsi tse ntle tsa karolo, litšoaneleho tsa maqhubu: 40 Hz ho 3 kHz, 10 ho isa ho 500 A AC range, tlhahiso 0.2 V AC fs
CLAMP HO PROBE 9132-50
Litšobotsi tsa khafetsa: 40 Hz ho isa ho 1 kHz, 20 ho isa ho 1000 A AC range, tlhahiso 0.2 V AC fs
AC FLEXIBLE CURRENT SENSOR CT9667-01/-02/-03
10 Hz ho 20 kHz, 5000/500 A AC, 500 mV/fs tlhahiso, 100 ho 254 mm (3.94 ho 10.00 in.), 3 loop diameters
Leak Hajoale *Bakeng sa lithapo tsa motlakase tsa khoebo, 50/60 Hz AC LEAKAGE CLAMP METER CM4003
6 mA range (1 A resolution) ho isa ho 200 A range, ka tlhahiso ea WAVE/ RMS, Connection Cable L9097 e kenyelelitsoe
AC ADAPTER Z1013
100 V AC ho isa ho 240 V AC

Sensor ea mocheso

Tlhokomeliso: Mabitso a khampani le mabitso a lihlahisoa a hlahang bukaneng ena ke matšoao a khoebo kapa matšoao a ngolisitsoeng a lik'hamphani tse fapaneng.

ABELETSO E

Cable e kenyang (C)

Cable e kenyang (D)

Likhetho tse ling bakeng sa Input

Ntlo-khōlō ea 81 Koizumi, Ueda, Nagano 386-1192 Japan https://www.hioki.com/

Lintlha tsohle li nepahetse ho tloha ka la 18 Hlakubele 2024. Litaba li ka fetoha ntle le tsebiso.

MR8875E19-43M

Litokomane / Lisebelisoa

HIOKI MR8875 Memory HiCORDER 1000V Direct Input Multi Channel Logger [pdf] Bukana ea Mosebelisi MR8875, MR8875 Memory HiCORDER 1000V Direct Input Multi Channel Logger, MR8875 Memory HiCORDER, Memory HiCORDER, HiCORDER, MR8875 HiCORDER, Memory HiCORDER 1000V Direct Input Multi Channel Logger, 1000V Direct In Logger 1000DirectV XNUMXV Setsi sa ho Input, Multi Channel Logger, Logger

Litšupiso

• Bukana ea Mosebelisi