MR8875 ebe nchekwa HiCORDER 1000V Direct ntinye otutu ọwa Logger
“
Nkọwapụta:
- Aha ngwaahịa: MEMORY HiCORDER MR8875
- Ntinye Voltage: 1000 V ntinye aka ozugbo
- Ọwa: 16 ọwa analọgụ ruo 60 thermocouple okpomọkụ
ọwa nha - SampỌsọ ling: Ruo ọwa 2 kwa nkeji abụọ ma ọ bụ ruo 2
chawa ọ bụla 50 sekọnd - Ike ndekọ: Dekọọ ọwa data 8 maka ụbọchị 155 ma ọ bụ
Ọwa 60 nke data maka ụbọchị 20 - Mkpebi: mkpebi 16-bit
Ntuziaka ojiji:
Ọrụ Logger ọtụtụ ọwa:
MR8875 na-enye ike nha ọtụtụ ọwa yana a
kọmpat imewe maka ibugharị. Wụnye modul ntinye dabere na nke gị
mkpa nha, sitere na ọwa analọgụ ruo thermocouple
ọwa nha okpomọkụ.
Ndekọ ọsịsọ dị elu:
Ngwaọrụ nwere ike sample ọwa niile n'ihe dị ka 2 sekọnd.
Nwere ike sample otutu ọwa na dị iche iche etiti oge mgbe
na-ede data na-aga n'ihu na kaadị ebe nchekwa Hioki SD.
Ndekọ na-aga n'ihu ogologo oge:
Ịchekwa oge na kaadị SD na-enye ohere maka ogologo oge na-aga n'ihu
edekọ. Dekọọ data n'oge a kapịrị ọnụ maka ogologo oge
iji ezigbo kaadị ebe nchekwa Hioki SD.
Modul ntinye nke onye ọrụ-ahọpụtara:
Họrọ ma wụnye ihe ruru modul ntinye aka n'ụdị dị iche iche
nhọrọ. Gwakọta ma dakọtara modul maka voltage, okpomọkụ, nje,
na CAN mgbaàmà nha na nnukwu mkpebi.
Ngwa:
- Robots ụlọ ọrụ: Kwesịrị ekwesị maka nha
voltage, okpomọkụ, nsogbu, na ihe mmetụta mmetụta na ụlọ ọrụ mmepụta ihe
ngwa robotik. - Nnwale R&D ma ọ bụ Sayensị: Kwesịrị ekwesị maka
Nnwale arụmọrụ na ịdịte aka, nyocha ihe mmetụta, na XY
ndekọ na nyocha na ntọala mmepe. - Igwe ihe owuwu ihe, igwe ugbo, na
Ụgbọ ala: Nagide gburugburu ebe siri ike wee tụọ
voltage, okpomọkụ, nsogbu, na CAN akara maka mmepe
ebumnuche. - Nnwale inverter na moto: Mee primary-
na nha nke abụọ-akụkụ nke ọkụ ọkụ, ndekọ
waveforms, ma nwalee batrị EV.
Ajụjụ:
Q: Nwere ike MR8875 tụọ elu-voltagihe ntinye?
A: Ee, na MR8905 Analog Unit, MR8875 nwere ike tụọ
voltages ruo 1000 V DC ozugbo.
Q: Gịnị bụ ndekọ ikike nke MR8875?
A: Ngwaọrụ nwere ike idekọ ọwa 8 nke data maka ụbọchị 155 ma ọ bụ 60
Ọwa nke data maka ụbọchị 20 na nkeji nke 100 msec.
Ajụjụ: Enwere m ike ịgwakọta na dakọtara modul ntinye?
A: Ee, ị nwere ike họrọ na wụnye ihe ruru anọ ntinye modul si
nhọrọ dịgasị iche iche iji kwado mkpa nha gị.
"'
MEMORY HiCORDER MR8875
1000 V Direct Ntinye Multi-channel Logger
Dị ka Multi-channel Logger
MR8875 na-enye ike nha ọtụtụ ọwa na kọmpat, nha nha A4 nke na-eme ka ọ bụrụ ibu. Dabere na modul ntinye etinyere, ike nha sitere na ọwa analọgụ 16 ruo na ọwa nha okpomọkụ 60 thermocouple.
Dị ka Super-High-Speed Logger
MR8875 nwere ike n'out oge sample ọwa niile n'obere ihe dịka 2 sk. Sample ruo 2 ọwa kwa 2 sk ma ọ bụ ruo 60 ọwa kwa 50 sec mgbe na-ede data na-aga n'ihu na kaadị ebe nchekwa SD ozugbo. * A na-ekwe nkwa ịrụ ọrụ naanị site na ezigbo kaadị ebe nchekwa Hioki SD.
Dị ka onye na-edekọ ndekọ na-aga n'ihu ogologo oge
Ịchekwa ezigbo oge na kaadị SD N'ihe dị ka 100 msec, MR8875 nwere ike ịdekọ ọwa data 8 maka ụbọchị 155 ma ọ bụ ọwa 60 nke data maka ụbọchị 20. * A na-ekwe nkwa ịrụ ọrụ naanị site na ezigbo kaadị ebe nchekwa Hioki SD.
Module Nleta 1000 V RMS ọhụrụ
Họrọ ma wụnye modulu ntinye anọ site na nnukwu nhọrọ. MR8875 na-enye gị ohere ịgwakọta ma dakọtara modul iji tụọ voltage, okpomọkụ, nsogbu, na akara CAN ma ọ bụ tụọ akara mmepụta ihe mmetụta na mkpebi dị elu, 16-bit.
2
Modul ntinye nke onye ọrụ-ahọpụtara maka ngwa ndị ọzọ! Ngwọta kọmpat maka nha ọtụtụ ọwa
Robots ụlọ ọrụ
VoltagIhe mgbama njikwa okpomọkụ
Ihe mmetụta sensọ
Okpomọkụ dị iche iche na akụkụ mbughari
Ihe owuwu ihe nkwụnye nkwụnye ahụ dabere na modul pụtara na ị nwere ike ịgwakọta ma dekọọ akara dị iche iche n'ofe ọtụtụ ọwa - dị mma maka ịchọpụta ọrụ nke robots multi-axis.
eriri
moto ugbu a
Mgbama njikwa (nyocha mgbagha)
Example nke modul nchikota
Ihe analog nke MR8901
× 2
Voltage/Temp Unit MR8902 × 1
Ngalaba eriri MR8903
× 1
Nnwale R&D ma ọ bụ Sayensị
Voltage
Okpomọkụ
Site na ọtụtụ ọwa, ikike ndekọ ogologo oge, MR8875 dabara nke ọma maka ojiji na ngwa mmepe dịka arụmọrụ yana nnwale ogologo oge.
– Dekọọ ihe mmetụta. - Nyochaa sensọ na ngwaọrụ ndị ọzọ. - Jiri dị ka ihe ndekọ XY (flatbed).
Example nke modul nchikota
Ihe analog nke MR8901
× 2
Voltage/Temp Unit MR8902 × 2
Mmepe nke igwe eji ewu ihe, igwe ugbo na ugbo ala
Voltage Ọnọdụ okpomọkụ CAN
Ọnụ ego nke ECU
IKE
Okpomọkụ gburugburu ebe obibi emelitere na nguzogide ịma jijiji na-enyere MR8875 aka iguzogide gburugburu nha nha.
Example nke modul nchikota
Ihe analog nke MR8901
× 1
Voltage/Temp Unit MR8902
× 1
Ngalaba eriri MR8903
× 1
Nwere ike nkeji MR8904
× 1
Enweghị kọntaktị nwere ike sensọ SP7001-95* × 1
* Anaghị akwado CAN FD mgbe ị na-eji MR8875 na MR8904.
3
Ngwa
Ihe ndekọ data dị elu
MR8875
Nnwale inverter na moto
Oke-voltagntinye (MR8905)
Ntụle nke isi na nke abụọ nke ọkụ ọkụ UPS na ihe ntụgharị ọkụ ọkụ azụmahịa Dekọọ inverter isi na nke abụọ n'akụkụ ebili mmiri.
Clamp- Na sensọ
Ihe mmetụta nke Torque Encoder
Batrị
Ihe ntụgharị
Example nke modul nchikota
Akụkụ Analog MR8905 × 2
(ruo 4 elu-voltage channel)
Ngalaba Analog MR8901 × 2 (ruo 4 obere voltage ọwa na ọwa mmepụta ihe mmetụta 4 dị ugbu a)
Ngalaba ihe mmetụta moto
Ntinye Pulse
Mita torque
Ọkpụkpọ · Ntugharị
Ibu ibu
Nlele nke batrị EV
1000V DC (CAT II)
Tulee ụdị ebili mmiri ntụgharị ECU na EV
Site na nkeji Analog MR8905, MR8875 nwere ike tụọ voltage nke sel batrị n'otu n'otu - usoro nke chọrọ nhazi dị elu na mkpebi dị elu - na mkpebi 16-bit (1/1250 nke oke). Ngwa ahụ nwere ike tụọ akara ruru 1000 V DC ozugbo.
Batrị
· Nyocha batrị
Example nke akara akara na nleba oge/ịchụpụ oge
Nnwale akụrụngwa ike Nnwale njirimara nke ike
akụrụngwa
600V AC (CAT III)
(nnwale ọjụjụ na sekit breaker)
Nnwale ịjụ oyi
Nyochaa njikọ dị n'etiti ihe ndị dị ka generator voltage tupu na mgbe ọrụ mgbawa sekit gasịrị, ogo mgbanwe dị na RPM, ọkwa ọrụ gọvanọ servo, na oge nhazi nrụgide nrụgide.
4
1 Ịchekwa oge
gaa na kaadị SD na mkpebi dị elu
Chịkọta akara anụ ahụ na 500 kS/ssampling ọnụego nwere nnukwu mkpebi nke 25,000 isi fs
Ntinye
Ntughari A/D
Nnọpụ iche
25,000 isi
A na-eji otu ụkpụrụ arụ ọrụ dị ka nke oscilloscope dijitalụ iji dekọọ data na nnukwu ebe nchekwa dị n'ime na oke ọsọ. Ihe sampỌnụego ya bụ 500 kS/s (oge 2 s) na ọwa niile n'otu oge. A na-edekọ ụdị ebili mmiri nke ihe mmetụta ma gosipụta ya n'ikwesị ntụkwasị obi. Ọzọkwa, mkpebi A/D 16-bit na-eme ka o doo anya na agaghị echefu mgbanwe ndị dị aghụghọ na akara mmetụta.
Ndekọ data SD dị oke ọsọ dị elu bụ mmụba dị ukwuu karịa ngwaahịa ndị kpara
MR8875 na-ewere advantage nke teknụzụ kaadị SD nke mgbanwe iji na-enye nchekwa ngwa ngwa ozugbo na kaadị ebe nchekwa site na ngwa ngwa dị ka nkeji abụọ (a na-ekwe nkwa ọrụ naanị na ezigbo kaadị ebe nchekwa HIOKI SD). Mgbe oge ndekọ (sampling rate) bụ 50 s ma ọ bụ obere, data maka ọwa 60 niile nwere ike ịdekọ ya n'ihu ogologo oge.
Sampoge dị mkpụmkpụ dịka 2 sk (sampọsọ nke 500 kS / s)
Dee na ebe nchekwa dị n'ime
n Oge kachasị ka ịdekọ na ebe nchekwa dị n'ime (anaghị agwụ ike)
* Ebe nchekwa na-echekwara na modul nke ọ bụla, eserese a bụ ntụnyere nke ịchekwa n'otu nkeji. * Esemokwu arụnyere arụnyere, yana ntinye P1 na P2 nke ọ bụla na-eji ikike nchekwa nke dabara na ọwa analọgụ.
Ọnụọgụ ọwa a ga-eji
1 CH
3 ch ruo 4 CH
9 ch ruo 16 CH
Axis oge (anaghị agwụ ike)
200 s/nkewa
Oge
2 s
80,000 nke 16 s
20,000 nke 4 s
5,000 nke 1 s
1 ms/nkewa 10 s
1 nkeji 20 s
20 s
5 s
10 ms/nkewa 100 s
13 nkeji 20 s
3 nkeji 20 s
50 s
100 ms/div 1 ms 2 h 13 min 20 s
33 nkeji 20 s
8 nkeji 20 s
1 nkeji 10 ms 22 h 13 min 20 s 5 h 33 min 20 s 1 s 23 h 20 min XNUMX s.
10 s/div 100 ms 9 d 06 h 13 min 20 s 2 d 07 h 33 min 20 s 13 h 53 min 20 s
100 s/nkewa 1.0 s 92 d 14 h 13 min 20s 23 d 03 h 33 min 20 s 5 d 18 h 53 min 20 s
5 min/nkewa 3.0 s 277 d 18 h 40 min 69 d 10 awa 40 min 17 d 08 elekere 40 min
Ntinye
Ntughari A/D
Nnọpụ iche
25,000 isi
n Oke ndekọ na kaadị ebe nchekwa 2 GB SD
* Ebe ọ bụ na etinyere ozi nkụnye eji isi mee, n'ezie data nha nwere ike ịdekọ bụ ihe dịka 90% nke oge egosiri na tebụl dị n'okpuru. Oke kachasị bụ ụbọchị 1,000 mana ekwenyere ọrụ maka otu afọ.
* Ogologo oge ndekọ nwere oke dabere na ọnụọgụ ọwa nha. * Esemokwu arụrụ arụ, pulses P1 na P2 ntinye nke ọ bụla na-eji ikike nchekwa dabara na otu.
analọg ọwa.
Sampoge dị mkpụmkpụ dịka 2 sk (sampỌnụ ego nke 500kS / s)
Dee na kaadị nchekwa SD ozugbo
Axis oge
Ogologo oge ndekọ
200 s/nkewa
2 s
500 s/nkewa
5 s
1 ms/nkewa 10 s
2 ms/nkewa 20 s
5 ms/nkewa 50 s
10 ms/nkewa 100 s
20 ms/nkewa 200 s
50 ms/nkewa 500 s
100 ms/div
1 ms
200 ms/div
2 ms
500 ms/div
5 ms
1 s/nkewa 10 ms
2 s/nkewa 20 ms
5 s/nkewa 50 ms
10 s/nkewa 100 ms
30 s/nkewa 300 ms
50 s/nkewa 500 ms
60 s/nkewa 600 ms
100 s/nkewa
1.0 s
Nkeji 2/nkewa
1.2 s
Nkeji 5/nkewa
3.0 s
1 CH
35 min. 47 s 1 d 29 h 28 min 2 s 58 d 57 h 5 min 57 s 54 d 14 h 54 min 47 s 1 d 05 h 49 min 34 s 2 d 11 h 39 min 08 s 6 s 05 07 Oke oke 50 ụbọchị Oke oke 12 ụbọchị oke oke 10 ụbọchị oke oke 15 ụbọchị oke oke 41 ụbọchị oke oke 24 ụbọchị oke oke 20 ụbọchị
2 CH
17 min 53 s 44 min 44 s 1 h 29 min 28 s 2 h 58 min 57 s 7 h 27 min 23 s 14 h 54 min 47 s 1 d 05 h 49 min 34 s 3 d 02 h 33 min 55 d. 6 h 05 min 07 s 50 d 12 h 10 min 15 s 41 d 31 h 01 min 39 s 14 d 62 h 03 min 18 s 29 d 124 h 06 min 36 s 58 d 310 h 16 min 32 h 25 min 621 s Oke oke 09 ụbọchị Oke oke 04 ụbọchị oke oke 51 ụbọchị oke oke 1000 ụbọchị oke oke 1000 ụbọchị oke oke 1000 ụbọchị
4 CH
N. s 22 d 22 h 44 min 44 s 1 d 29 h 28 min 3 s 43 d 41 h. d 7 h 27 min 23 s Oke oke 14 ụbọchị Oke oke 54 ụbọchị oke oke 47 ụbọchị oke oke 1 ụbọchị oke oke 13 ụbọchị
8 CH
N/A 11 min 11 s 22 min 22 s 44 min 44 s 1 h 51 min 50 s 3 h 43 min 41 s 7 h 27 min 23 s 18 h 38 min 28 s 1 d 13 h 16 min 57 3 d h 02 min. min 33 s 55 d 7 h 18 min 24 s 48 d 15 h 12 min 49 s Oke oke 37 ụbọchị Oke oke 31 ụbọchị Oke oke 01 ụbọchị
16 CH
N/AN/A 11 min 11 s 22 min 22 s 55 min 55 s 1 h 51 min 50 s 3 h 43 min 41 s 9 h 19 min 14 s 18 h 38 min 28 s 1 d 13 h 16 min 57 s. d 3 h 21 min 12 s 24 d 7 h 18 min 24s 48 d 15 h 12 min 49 s 37 d 38 h 20 min 04 s 03 d 77 h 16 min 08 s 06 d 233 h 00 min24 19 388 h 08 min 40 s 32 d 466 h 00 min 48 s 38 d 776 h 17 min 21 s 04 d 932 h 01 min 07 s Oke oke 17 ụbọchị
30 CH
N/AN/AN/A 11 min 55 s 29 min 49 s 59 min 39 s 1 h 59 min 18 s 4 h 58 min 15 s 9 h 56 min 31 s 19 h 53 min 2 s 2 d 01 h 42 min 36 s 4 d 03 h 25 min 13 s 8 d 06 h 50 min 27 s 20 d 17 h 06 min 09 s 41 d 10 h 12 min 19 s 124 d 06 h 36 min 58 s 207 d 03 h01 d 37 h 248 min 13 s 13 d 56 h 414 min 06 s 03 d 14 h 497 min 02 s Oke oke 27 ụbọchị
60 CH
N/AN/AN/AN/A 14 min 54 s 29 min 49 s 59 min 39 s 2 h 29 min 07 s 4 h 58 min 15 s 9 h 56 min 31 s 1 d 00 h 51 min 18 s 2 d 01 h 42 min 36 s 4 d 03 h 42 min 36 s 10 d 08 h 33 min 04 s 20 d 17 h 06 min 09 s 62 d 03 h 18 min 29 s 103 d 13 h 30 min 48 124 s min 06s 36 d 48 h 207 min 03 s 01 d 37 h 248 min 13 s 13 d 56 h 621 min 09 s
5
2 Multi-channel
Ntụkọ agwakọta nke akara ngosi dị iche iche
Wụnye modul ntinye dịka mkpa gị siri dị
MR8875 na-eji ntinye ụdị ngwa mgbakwunye amp nhazi nke na-enye ndị ọrụ ohere ịhọrọ nkeji ntinye dabara adaba maka ebumnobi nha ha. Na mgbakwunye, ọ dị mfe ịgbanwe nkeji ntinye mgbe ịzụrụchara.
Ngalaba Analog MR8905, nke nwere ike ịnabata oke voltages ma na-enye ohere ntinye aka ozugbo ruru 1,000 V (CAT II) ma ọ bụ 600 V (CAT III), dị maka nnukwu voltaji.tage ngwa. Na mgbakwunye na ụdị ebili mmiri ozugbo, a na-akwadokwa nha nha ebili mmiri RMS.
Ọbụlagodi ngalaba ntinye ọkọlọtọ na-akwado nha 1,000 V (CAT III) ma ọ bụrụ na ejiri ya na usoro nyocha dị iche iche nke P9000 emepụtara ọhụrụ.
Maka nha mmetụta uche dị elu, jiri ngalaba Strain MR8903, nke nwere ọrụ 1 mV fs (maka mkpebi kachasị nke 0.04 V). A na-akwadokwa nleta mmepụta ihe mmetụta mwepu.
MR8905 Ngalaba Analog MR8905 anaghị etinye eriri ntinye. Ịzụta iche iche nke nhọrọ Njikọ USB Set L4940 (× 2) na Alligator Clip Set L4935 (× 2), nke nwere obere vidiyo dabara na nsọtụ eriri, achọrọ.
MR8901 P9000-01 ma ọ bụ P9000-02
Enwere ike iji P9000 dị iche iche na ọkọlọtọ Analog Unit MR8901 iji mee ka volta dị elu.tage, 1,000 V (CAT III). P9000-02 na-eme ka nha ọkwa RMS nke ahịrị ọkụ AC.
Na-anabata ntinye pulse ozugbo yana ọdụ nyocha mgbagha ọkọlọtọ
MR8875 na-enye ọwa ntinye pulse abụọ nwere ọkọlọtọ nke na-enye ohere ntinye enweghị voltage a- na b-kọntaktị, ndị na-anakọta oghe, ma ọ bụ voltage. Enwere ike tụọ akara ngosi ndị a na-ebunye dị ka mkpọmkpọ, dị ka nke ọsọ ntụgharị na ọnụego erute (gụọ). Jiri mgbanaka nyocha maka mgbanyụ/ gbanyụọ (echiche) mgbama ebili mmiri dị ka relay na PLC waveforms. Ụdị nyocha mgbagha abụọ dị na-adabere na ụdị mgbaàmà (lee p. 15).
n Nkwado maka ihe nlere dị iche iche
(Ọkọlọtọ MR8875 ụdị nke nwere ikike ntinye mkpụrụ akụ. Ntinye uche chọrọ nyocha mgbagha nhọrọ.)
Ebumnuche nha
Ọsọ ntụgharị
Ngalaba ntinye
Ọkọlọtọ nwere ntinye pulse
Oke nha 5000 (r/s) fs
Mkpebi
Sampling
Njirimara ugboro ugboro
1 (r/s)
10 msk (100 S/s)
N/A
Ọkọlọtọ Pulse kwadoro nchikota ya na ntinye usu
65,535 ruo 3,276,750,000 agụọ fs
1 gụọ
N/A
N/A
Ọ dabere na nyocha mgbagha a na-eji
Kọntaktị nyefee, voltage gbanye/ gbanyụọ
Nyocha echiche 9320-01
Oke. ntinye 50V ọnụ ala +1.4 V, +2.5 V, +4.0 V,
N/A
2 sk 500 nsec ma ọ bụ (500 kS/s) nzaghachi dị ala
ma ọ bụ na-abụghị voltage kọntaktị (obere/oghe)
Volta AC/DCtage gbanye/ gbanyụọ
Nchọpụta mgbagha MR9321-01
Dabere na nyocha mgbagha a na-eji achọpụta ọnụnọ AC/DC voltagihe ruru 250 V.
N/A
2 sk 3 msk ma ọ bụ (500 kS/s) nzaghachi dị ala
Mara: A naghị akwado ugboro ahịrị ọkụ, oke ọrụ na nha obosara usu.
· Ọpụampnke ịdekọ ụdị ebili mmiri ozugbo yana ọkwa RMS n'oge obere oge outage nke ọkụ ọkụ AC (iji MR8905)
· Ntụnye oge ọtụtụ ọwa site na iji mgbagha ebili mmiri
n Ọnụ ntinye ntinye Pulse
Were advantage nke ọrụ nkesa ugboro ugboro, setịpụrụ site na ọnụ ọgụgụ 1 ruo 50,000, iji nweta agụ ozugbo site na ihe ngbanwe nke na-ewepụta pulses multi-point dị ka ọsọ ntụgharị.
Ntinye pulse ahịrị abụọ (GND nkịtị)
6
3 Ihuenyo mmetụ
maka Intuitive Operation
Ihuenyo mmetụ na-eme ka arụmọrụ arụ ọrụ dịkwuo mma
A na-edobe bọtịnụ dị na MR8875 opekempe site na iji teknụzụ mmetụ aka. Igwe TFT agba dị elu nke 8.4 inch dị elu bụ interface nhọrọ maka imeziwanye nrụpụta site n'inye ahụmịhe nwere ọgụgụ isi karịa ụzọ ntinye ọdịnala.
Metụ ka ịpịgharịa azụ ma ọ bụ mee ka ụdị ebili mmiri dị elu
Gosipụta ụdị ebili mmiri mbụ n'oge ndekọ na-akwụsịghị nha site na imetụ akara ngosi mpịakọta aka na ihuenyo ahụ. Ị nwekwara ike ịgbatị ụdị ifegharị amplitude site na ịpịgharị site na ebili mmiri elu (iji bugharịa) ma ọ bụ ala (iji bugharịa).
Ọrụ ịgụ cursor dị elu maka nyocha multichannel
Cursors isii A, B, C, D, E na F dị, ma e jiri ya tụnyere nke A- na B-cursors. Jiri cursors tụọ ma gosipụta ihe ndị a: · A, B, C, na D: Ike eletrik na oge sitere na mkpalite · E na F: ikike eletrik · AB na cursors CD: Ọdịiche oge na ihe dị iche · EF cursors: Electric ikike
Ihuenyo gbawara agbawa, ngosi mpempe akwụkwọ, ntinye akara mmemme na ọrụ ịwụ elu-dị mkpa maka nyocha nke ọma
A na-enye ọrụ ngosi gbawara enyo na mpempe akwụkwọ iji kwado ọtụtụ ọwa. Enwere ike ịhọrọ ụdị ngosi nke onye ọ bụla na enwere ike kenye ngwa na mpempe akwụkwọ ọ bụla maka nyocha, na-abawanye arụpụtaghị ihe. H Maka ndekọ ogologo oge, tag isi ihe dị mkpa na ihe nrịbama mmemme. Enwere ike idobe ihe nrịbama 1000 ka ị nwee ike wụba na ha ngwa ngwa maka nyocha zuru ezu.
7
4 Kọmputa nyocha
site na LAN, SD na ebe nchekwa USB
LAN-dakọtara Web/ Ọrụ nkesa FTP na ntụgharị waveform/CSV site na iji sọftụwia agụnyere "Wv"
Were advantage nke arụnyere na 100BASE-TX LAN interface iji jikọọ na PC: WEB ihe nkesa: Jiri Web Ọrụ nkesa na view waveforms ma jiri PC gị jikwaa MR8875 n'ime anya web ihe nchọgharị
Ihe nkesa FTP: Jiri ọrụ nkesa FTP detuo data echekwara na ebe nchekwa (kaadị SD, ebe nchekwa USB, ma ọ bụ ebe nchekwa nchekwa ime) na PC. Ị nwere ike mgbe ahụ view data ọnụọgụ ọnụọgụ abụọ enwetara na MR8875 na PC, ma ọ bụ tụgharịa data na CSV site na iji Wave efu.Viewer (Wv) ngwa maka nyocha ọzọ na Excel. Budata ụdị Wave kacha ọhụrụViewsi na HIOKI websaịtị na www.hioki.com.
n Jikwaa MR8875 anya site na iji Web ọrụ nkesa
Jiri ụdị web ihe nchọgharị iji hụ ihuenyo MR8875 na PC gị n'enweghị ngwanrọ pụrụ iche ọzọ achọrọ. Mepụta ntọala, nweta data, wee nyochaa ihuenyo n'ụzọ dị mfe.
Mara: Enweghị ike ịnweta data Waveform site na ebe nchekwa dị n'ime n'oge nha.
n Nyefee data site na iji FTP
Mgbe emechara nha, a na-ebufe data na-akpaghị aka na sava FTP nke na-agba na PC. Enwere ike ịnyefe data n'oge ịchọrọ.
Wv ihuenyo example Excel spreadsheet example
n Budata data site na iji FTP
Data nha na files na ndekọ mgbasa ozi na n'ime ebe nchekwa nwere ike nweta site na PC.
Mara: Enweghị ike ịnweta data Waveform site na ebe nchekwa dị n'ime n'oge nha.
n Tinye data na ozi-e
Mgbe emechara nha, ị nwere ike izipu data ewepụtara ozugbo ka ọ bụrụ mgbakwunye email. Enwere ike ịnyefe data n'oge ịchọrọ.
Chekwaa data na ebe nchekwa USB ma ọ bụ kaadị SD
Enwere ike iji ebe nchekwa USB dị mma*1 ma ọ bụ kaadị ebe nchekwa SD*1
detuo data echekwara na ebe nchekwa ime na PC. Data
echekwara na kaadị SD MR8875 nwekwara ike ibudata na PC site na iji eriri USB.*2 *1 Jiri naanị HIOKI SD kaadị ebe nchekwa na USB ebe nchekwa stick, nke bụ manu-
kwadoro ụkpụrụ ụlọ ọrụ siri ike, maka nchekwa ogologo oge nke data dị mkpa. Enweghị ike ịchekwa data ozugbo na ebe nchekwa USB. * 2 Naanị data echekwara na kaadị ebe nchekwa HIOKI SD ka enwere ike ibudata na PC site na eriri USB.
8
5 Ike nyocha data dị ike
Ọrụ nyocha FFT
N'otu oge tụọ ihe anọ phenomena
Ọrụ nyocha FFT nke MR8875 nwere ike nyochaa ihe ngosi anọ n'otu oge na otu nha. Site n'ime nyocha FFT nke ntinye mgbaama dị iche iche sitere na ọwa 1 ruo 4, ọ ga-ekwe omume nyochaa akụkụ ugboro nke ọwa ọ bụla na-eme n'otu oge. Maka example, ị nwere ike n'out oge view ụdịdị dị n'ahịrị ahịrị, ụdịdị RMS, ụdị ike dị iche iche, na ụdịdị ụdịdị dị iche iche maka ntinye mgbama na ọwa 1.
Ọrụ nyocha maka ọnọdụ nha dị iche iche
MR8875 nwere ọrụ mgbako a na-ejikarị n'oge nha ubi. A na-eji ụdịdị dị n'ahịrị eme ihe na nyocha nke na-elekwasị anya na waveform ampụkpụrụ litude, ebe a na-eji ụdị ike dị iche iche na nyocha nke na-elekwasị anya na ike, maka example mkpọtụ na ịma jijiji. Ị nwere ike họrọ ọrụ mgbako kacha dabara ngwa gị - maka example, jiri ọrụ mbufe maka nha nke na-achọpụta sistemụ dị n'ime dabere na njirimara I/O.
Ọrụ ngosipụta ọnụ ahịa kacha elu (ngosi akara)
Enwere ike iji ọrụ ngosipụta ọnụ ahịa kacha elu wee chọọ oke na oke mpaghara wee gosipụta ha. Enwere ike igosipụta ụkpụrụ njirimara n'ụzọ dị mfe ọbụlagodi na-ejighi cursor. Ebe MR8875 na-echekwa ihe ruru okpokolo agba 200 (nsonaazụ mgbako 200) nke data, ọ ga-achọkwa ọnụ ahịa kacha elu ozugbo ma ọ bụrụ na ahọpụtara etiti dị iche.
Na-arụ ọrụ ngosi ụdịdị dị iche iche
Enwere ike iji ọrụ ngosi ihe ngosi MR8875 na-agba ọsọ iji gosipụta ụdịdị dị iche iche na-agbanwe ka oge na-aga. Enwere ike ịchekwa ihe ruru okpomoku 200* nke nsonaazụ mgbako kacha ọhụrụ. Agbanyeghi na usoro Hioki's MR8847 na-akwado naanị ịme ngosi ụdịdị dị iche iche maka ụdị mgbako ụfọdụ, MR8875 nwere ike iwepụta ngosipụta a yana ọrụ mgbako FFT niile. Na mgbakwunye, ọ bụrụ na agbanwere etiti ahọpụtara, enwere ike ibunye uru cursor. * A na-echekwa data etiti n'ime ebe nchekwa akụrụngwa, n'ihe gbasara-
Obere ma a na-eji ihe ngosi spectrum na-agba ọsọ.
MR8875 nwekwara ike ifriizi ihe ngosi dị iche iche na ihuenyo ya n'oge nha. Ọrụ a na-enye ohere ịhụ data na-enweghị ntinye ozi na-enweghị isi na ihuenyo ma ọ bụ na data. Enwere ike ịpụta nsonaazụ mgbako niile dị ka data CSV, nke enwere ike ibunye n'ime ngwa mgbasa ozi dị ka Microsoft Excel wee mepụta eserese nwere akụkụ atọ.
ExampE gosipụtara data na Microsoft Excel
9
Ọrụ windo sara mbara
MR8875 na-enye ngụkọta ọrụ windo asaa, gụnyere akụkụ anọ na Hanning variants. A na-eji ọrụ akụkụ anọ maka nyocha nke na-elekwasị anya na ụdịdị dị iche iche ampụkpụrụ litude, ebe a na-eji ọrụ Hanning mee nyocha nke na-elekwasị anya n'ogo nkewapụ ihe dị iche iche nke ngwa ngwa ugboro. Na mgbakwunye, site na iji mpio ngosipụta na nha mmetụta na-eji hama mkpali, ngwa ahụ na-enyere nyocha nke ọma karịa site na ịmachi akụkụ mkpọtụ na-adịghị mkpa na axis oge.
Ọrụ mgbako na-aga n'ihu
Mgbe ị na-enyocha mgbama na-agbanwe ka oge na-aga, ọnụ ọgụgụ nke isi mgbako FFT na-aghọ mmachi, na-egbochi ebili mmiri.
site na nyochaa na ngalaba oge niile. Ọzọkwa, iji ọtụtụ FFT isi na-egbochi inweta nsonaazụ achọrọ
n'ihi na ụdịdị dị iche iche bụ nkezi. MR8875 na-eji ọrụ mgbako na-aga n'ihu na-edozi nsogbu ndị a.
Ọnụọgụ nke mwụli
Maka data na-ekpuchi ogologo oge, enwere ike ịgbanwe isi ihe mgbako site na ọtụtụ ihe mwụli * na otu.
Ụdị ntụgharị oge
nkeji oge. Ọzọkwa, mgbako maka ihe ruru 200 okpokolo agba
enwere ike imezu ya na otu ọrụ. Enwere ike ịmegharị nsonaazụ mgbako maka oge dị iche icheviewed site n'ịgbanwe etiti mgbako, n'agbanyeghị ma ị na-eji ihe ngosi spectrum na-agba ọsọ ma ọ bụ ngosi otu ihuenyo.
Nsonaazụ mgbako FFT
Frame 2
Frame 1
Ihe atụ nke ngụkọta oge na-aga n'ihu
Frame 200
* Enwere ike ịtọ ọnụọgụ nke ịwụ elu site na 100 ruo 10,000.
Ọrụ ngosi machie
Enwere ike iji ọrụ ngosi ihe mkpuchi mkpuchi MR8875 hụ ọdịiche dị na ụdị ebili mmiri ewepụtara site na iji nha na-aga n'ihu n'oge. Ọ bụ ezie na ụdị Hioki gara aga enwebeghị ike ịgbakọ ngụkọta FFT, MR8875 na-enye ikike a, na-eme ka ọhụhụ nke nyocha dị mma.
Ngosipụta ihuenyo na-adọrọ adọrọ
Enwere ike ịgbanwee ihe ngosi MR8875 dịka ngwa dị n'aka si dị. Maka exampỌzọkwa, enwere ike iji ihe ngosi otu ihuenyo ya mgbe ọ na-elekwasị anya na njikọ dị n'etiti ọwa, ebe enwere ike iji ihe ngosi ihuenyo anọ ya wepụrụ ụdịdị mgbagwoju anya maka viewing. Na mgbakwunye, enwere ike igosipụta oge na ụdị ebili mmiri dị iche iche n'elu na n'okpuru otu ibe mgbe a na-elekwasị anya na mmekọrịta ya na oge ebili mmiri ewepụtara.
Ọrụ mgbako FFT ụkpụrụ
Isi mgbako
1,000 2,000 5,000 10,000
Ọrụ windo
Window akụkụ anọ Hanning Hamming Blackman Blackman-Harris Flat top Exponential
Ngosipụta
AmpLitude Ezigbo akụkụ nke chepụtara echepụta akụkụ kacha elu ngosi: mpaghara kacha, kacha na-agba ọsọ ụdịdị dị iche iche (spectrogram): 200 ahịrị ihuenyo nkebi: 1-/2-/4-ihuenyo, Waveform + FFT
Ngosipụta otu ihuenyo
Ngosipụta oge-axis waveform na nsonaazụ mgbako FFT
Ọrụ nyocha nke ọkara
Ndị ọzọ
Ugboro (dị mfe) Ugboro (nkọwa) Ugboro ugboro (jide kacha elu)
Linear ụdịdị dị iche iche RMS ụdịdị dị iche iche Ike ụdịdị dị iche iche Nyefe ọrụ Cross ike ụdịdị dị iche iche Njikọta ọrụ Usoro ụdịdị dị iche iche
Oke ugboro: 1.33mHz ruo 400 kHz Max. Ọnụọgụ nke ọrụ n'otu oge: 4 Ngụkọta ndakpọ ndakpọ (THD) nyocha mkpokọta uru Ohere arụ ọrụ ike mgbazi dB scaling Ngụkọ na-aga n'ihu Mgbakọ nkenke ngụkọ nkenke: 32-bit floating point, IEEE otu-nkenke.
10
Ọrụ Mgbakọ Waveform
Ngụkọ oge n'etiti ọwa
MR8875 nwere ọrụ ịgbakọ n'etiti chanel ọhụrụ * nke na-enye gị ohere idobe ma dekọọ nsonaazụ maka mgbako abụọ na otu ntinye ntinye ka nha na-aga n'ihu.
* N'etiti ọwa na otu ntinye ntinye naanị (modul ntinye akwadoro: MR8901/8902/8903)
* Mgbakọ n'etiti ihe dị iche iche setịpụrụ onye ọrụ na MR8902/8903 (vol.tage na okpomọkụ, wdg) anaghị akwado.
Mgbakọ Waveform-akụkụ
Ụdị firmware MR8875 gara aga na-akwado naanị mgbako na-emepụta ụkpụrụ dị ka nkezi na ụkpụrụ RMS, mana ụdị ọhụrụ ahụ nwere ike hazie ihe ruru mgbako asatọ n'otu oge, gụnyere ọrụ mgbakọ na mwepụ yana ihe dị iche iche na ngụkọ-mmetụta-mmetụta ndị ọzọ.
Mgbakọ nzacha dijitalụ
Ụdị ebili mmiri CH 1
Ụdị ebili mmiri CH 2
Nsonaazụ ngụkọta oge waveform
Nsonaazụ nke ịtụ ụdị ebili mmiri gbagọrọ agbagọ nwere mkpọtụ
Nsonaazụ nke simulation gbadoro ụkwụ na mgbako nke ebili mmiri nke ajụla mgbagha ugboro ugboro site na ịfefe ya na nzacha dị ala.
MR8875 na-enye mgbako nzacha dijitalụ ọhụrụ * dị ka akụkụ nke nhọrọ nhazi nhazi nke waveform, na-enye ohere
Ụdị ebili mmiri LPF
Ụdị LPF
akụkụ bandwit dị mkpa nke ụdị ebili mmiri nwere mkpọtụ
a ga-agbakọ ma gosipụta ụdị ifegharị nke ga-esi na ya pụta.
Ụdị ebili mmiri HPF
HPF ụdịdị
* A na-enye ihe nzacha dijitalụ na-enweghị ngwụcha (FIR) na nzaghachi mkpali na-enweghị ngwụcha (IIR).
Enwere ike ịhazi ihe nzacha dijitalụ abụọ ahụ na LPF (na-agafe naanị akụrụngwa obere ugboro), HPF (na-agafe naanị akụrụngwa ugboro ugboro), BPF (na-agafe naanị a
BPF ebili mmiri
Ụdịdị BPF
bandwidth ugboro nke ụfọdụ obosara), ma ọ bụ BEF (na-ajụ naanị bandwit ugboro ugboro
nke ụfọdụ obosara).
* Ọ bụ ezie na nhazi ngụkọta nke FIR na-ewe oge, ọ nwere ike iwepụta ụdị ebili mmiri na mba
agbagọ agbagọ. N'ụzọ dị iche, ngụkọ IIR na-arụpụta nsonaazụ n'ọsọ mgbako dị ngwa ngwa mana ọ na-enwekarị mgbagha oge. A na-akọwapụta oge nkwụsị nzacha ọ bụla nzacha.
6 nwere ike itinye akara ngosi maka nnwale ụgbọ ala
Ndekọ ngwakọta nke data CAN na ezigbo data dị ka voltage, okpomọkụ, ma ọ bụ mgbagha mgbaama
ECU
Nweta ozi dị ka injin RPM na ọsọ ụgbọ ala
Enwere ike itinye
Tụọ okpomọkụ na ịma jijiji n'ime ụgbọ ala
ECU
Ntinye analog
Ị nwere ike nweta data CAN na data analọg na usoro anaghị akpọtụrụ site na ijikọ SP7001-95 na MR8875 na MR8904*.
*CAN FD akwadoghị
n Eserese nwere ike igosi ozi na data analọgụ n'otu oge
Atụtara data CAN ewere data analọgụ
Ngosipụta ụdị ebili mmiri n'otu akụkụ oge
MR8875 na-egosiputa ụdị ebili mmiri analọgụ agbanwere site na nnyefe CAN ozugbo. N'ụdị ebili mmiri, data analọg dị ka voltage, okpomọkụ, nsogbu, na ozi anakọtara site na ụgbọ ala CAN dị ka ọsọ ụgbọ ala na RPM nwere ike igosi n'otu oge.
Enwere ike ibunye nchekwa data Vector's CAN site na iji ngwanrọ ewepụtara
Ọkọlọtọ ụlọ ọrụ CANdb® nchekwa data fileenwere ike itinye s na ngwa ntọlite nhazi ewepụtara iji chọpụta akara ngosi ọwa CAN. Ozi nwere ike ịbụ viewed na-eji ozi ndị ahịa akọwapụtara na aha akara, yana nkeji injinia nwere nha. Ebe ọ bụ na a kọwapụtalarị ụzọ dị ka ụdị data mgbama, mmalite bit, ogologo na usoro byte na CANdb. files, ndị ọrụ nwere ike itinye uche na ọrụ nha ha na-achọghị ịkọwa akara.
11
Onye nchịkọta akụkọ CAN (ngwaahịa jikọtara ya)
n Nhazi ntọala nke Sensọ CAN na-abụghị kọntaktị
Usoro a chọrọ ihe atọ: nyocha mgbaàmà, ihe mmetụta, na interface CAN. Ị nwere ike ịtụ ụdị edozi ma ọ bụ tụọ usoro ihe mejupụtara ya n'otu n'otu.
* Anaghị akwado CAN FD mgbe ị na-eji MR8875 na MR8904.
nyocha mgbaàmà
Sensọ
Nwere ike interface
Akara ngosi SP9250
Akara ngosi SP9200
Tọọ ụdị
Enweghị kọntaktị nwere ike SENSOR SP7001-95
tọọ ọdịnaya SIGNAL PROBE SP9250 NA-abụghị kọntaktị nwere ike SENSOR SP7001 nwere ike INTERFACE SP7150 (gụnyere L9510, eriri GND)
Enweghị kọntaktị nwere ike SENSOR SP7001/SP7002
Nwere ike INTERFACE SP7150
Ọkụ ọkụ: ike ụgbọ ala USB ma ọ bụ Z1013
Nwere ike INTERFACE SP7100
Ọkụ ọkụ: 10 ruo 30 V DC ma ọ bụ Z1008
Enweghị kọntaktị nwere ike SENSOR SP7001-90
tọọ ọdịnaya SIGNAL PROBE SP9200 NA-abụghị kọntaktị nwere ike SENSOR SP7001 nwere ike INTERFACE SP7100 (gụnyere L9500, eriri GND)
Enweghị kọntaktị nwere ike SENSOR SP7002-90
tọọ ọdịnaya SIGNAL PROBE SP9200 NA-abụghị kọntaktị nwere ike SENSOR SP7002 nwere ike INTERFACE SP7100 (gụnyere L9500, eriri GND)
Nagide oke okpomoku gburugburu ebe obibi, ịma jijiji, na egwu mfu data n'ihi ike gịtages
N'ule n'okporo ụzọ, oke ọnọdụ gburugburu ebe obibi jikọtara ya na okpomọkụ na ịma jijiji na-esikarị ike na ngwa eji atụ. MR8875 nwere oke okpomoku na-arụ ọrụ nke -10°C ruo 50°C (14°F ruo 122°F) ma kwekọọ n'ụkpụrụ Japanese siri ike maka arụmọrụ nguzogide ịma jijiji ejiri na nnwale ụgbọ ala (JIS DI1601). Emebere ya ka ọ nagide ọnọdụ siri ike nke nha ụgbọ ala. N'ihe omume nke ike ịtage mgbe a na-edekọ data, a na-edobe ọkụ eletrik site na iji nnukwu ikike arụ ọrụ ruo mgbe edere data kpamkpam na SD ma ọ bụ USB ebe nchekwa. Ihe ize ndụ nke mfu data ma ọ bụ mmebi nke file a na-ebelatala sistemụ, ma ka eweghachitere ike, enwere ike ịmalitegharị nha na akpaghị aka.
12
Nkọwa ndị bụ isi (nke ziri ezi na-ekwe nkwa maka otu afọ)
Ọrụ nha Ndekọ ọsọ dị elu
Ruo oghere 4, onye ọrụ nwere ike ịwụnye na ngwakọta ọ bụla site na itinye n'ime ya
isi unit
[MR8901 × 4]: Ọwa analọgụ 16 + ọkọlọtọ 8 ọkọlọtọ na ọwa pulse 2 [MR8905 × 4]: ọwa analọgụ 8 + mgbagha 8 ọkọlọtọ na ọwa 2 pulseỌnụọgụ ntinye
[MR8902 × 4]: Ọwa analọgụ 60 + ọkọlọtọ 8 ọkọlọtọ na ọwa pulse 2modul nwere ike ịbụ [MR8903 × 4]: 16 ọwa analog + ọkọlọtọ 8 na ọwa 2 pulse
arụnyere
[MR8904 × 4]: ọdụ ụgbọ mmiri 8 CAN (nyocha 60 analọg + nyochara 64 mgbagha ch) +ọkọlọtọ 8 mgbagha na 2 pulse ọwa
* Maka nkeji analọg, ọwa dịpụrụ adịpụ na ibe ya yana site na MR8875
GND. Maka ọdụ ụgbọ mmiri CAN ma ọ bụ ọdụ mgbagha ọkọlọtọ ma ọ bụ ọdụ ụgbọ mmiri ọkọlọtọ.
N'ezie, ọwa niile nwere GND nkịtị.
Oke. sampọnụego ling
MR8901/MR8905: 500 kS/s (oge 2 s, ọwa niile n'otu oge) MR8902: 10 msec (nyocha ọwa)
MR8903: 200 kS/s (Oge 5 s, ọwa niile n'otu oge) Mpụga sampling: 200 kS/s (oge 5 s)
Ike nchekwa nchekwa
Mkpokọta 32 Mega-okwu (mmebawanye ebe nchekwa: ọ dịghị, 8 Mega-okwu/modul)
* 1 okwu = 2 bytes, ya mere 32 Mega-okwu = 64 Mega-bytes. * Enwere ike ikenye ebe nchekwa dabere na ọnụọgụ ọwa ejiri na modul ntinye ọ bụla
Ọrụ ndabere nchekwa mpụga (na 23°C/73°F)
Ọnụ ụzọ
Oghere kaadị SD × 1, eriri USB (ọkọlọtọ USB 2.0)
* FAT-16 ma ọ bụ FAT-32 usoro na SD ma ọ bụ USB
Ndabere ntọala elekere na oke: opekata mpe afọ 10 Waveform ndabere ọrụ: ọ nweghị
LAN × 1: 100BASE-TX (DHCP, DNS kwadoro, sava FTP, onye ahịa, web ihe nkesa, zipu ozi-e, njikwa iwu)
Ihe nkwụnye eriri USB usoro mini-B × 1 (nhazi na nha site
iwu nkwukọrịta, nyefee data site na kaadị SD gaa na PC)
Obere eriri USB usoro mini-A × 2 (USB ebe nchekwa, òké USB,
Ahụigodo USB)
Njikọ njikwa mpụga
Ntinye mkpalite mpụga, mpụta mkpalite, mpụta sampntinye ling, ntinye pulse × 2, ntinye mpụta × 3, mmepụta mpụga × 2
Ọkụ ọkụ mpụga
Ahịrị atọ, +5 V, 2 A ngụkọta mmepụta, GND nkịtị na ahụ GND
* Enweghị ike iji nyocha dị iche iche 9322
Ọnọdụ okpomọkụ na iru mmiri na-arụ ọrụ (enweghị condensation)
Okpomọkụ: -10°C ruo 40°C (14°F ruo 104°F), 80% rh ma ọ bụ ihe na-erughị 40°C ruo 45°C (104°F ruo 113°F), 60% rh ma ọ bụ ihe na-erughị 45°C ruo 50°C (113°F ruo 122°F), 50% rh ma ọ bụ obere
Mgbe batrị na-akwado ya: 0°C ruo 40°C (32°F ruo 104°F), 80% rh ma ọ bụ ihe na-erughị mgbe ị na-anya ngwungwu batrị: 10°C ruo 40°C (50°F ka 104°F) ), 80% rh ma ọ bụ obere Nchekwa: -20°C ruo 40°C (-4°F ruo 104°F), 80% rh ma ọ bụ ihe na-erughị
40°C ruo 45°C (104°F ruo 113°F), 60% rh ma ọ bụ ihe na-erughị 45°C ruo 50°C (113°F ruo 122°F), 50% rh ma ọ bụ obere nchekwa batrị: -20 Celsius C ruo 40°C (-4°F ruo 104°F), 80% rh ma ọ bụ obere
Ụkpụrụ ọdabara
Nchekwa: EN61010-1, EMC: EN61326, EN61000-3-2, EN61000-3-3
Ụkpụrụ kwekọrọ
Mgbochi ịma jijiji: JIS D1601: 1995 5.3 (1) (dakọtara na klaasị 1: ụgbọ ala ndị njem, ọnọdụ: klaasị A)
Ịnye ọkụ
Ihe nkwụnye AC Z1002: 100 ruo 240 V AC (50/60 Hz) ngwugwu batrị Z1003: 7.2 V DC na-aga n'ihu oge ọrụ: otu elekere na ọkụ azụ (ihe nkwụnye AC nwere mkpa mgbe ejiri ya na ngwugwu batrị)
Ọkụ ọkụ DC: 10 ruo 28 V DC (biko kpọtụrụ onye nkesa Hioki maka
eriri njikọ)
Ọrụ Nchaji Oge nchaji: ihe ruru. awa 3 (iji ihe nkwụnye AC na ngalaba isi
(na 23°C/73°F)
iji fanye ngwugwu batrị Z1003)
Oriri ike
Mgbe ị na-eji AC nkwụnye Z1002, ma ọ bụ mpụga DC ike ọkọnọ: 56 VA Mgbe ị na-eji batrị: 36 VA
Akụkụ na ibu
Ngwa ewepụtara
Ngosipụta
Ihe ruru. 298W × 224H × 84D mm (11.73W × 8.82H × 3.31D in.), 2.4 n'arọ
(84.7 oz.), (ewezuga modul ntinye na ngwugwu batrị)
Exampnhazi le: 2.75 n'arọ (97.0 oz., ewezuga modulu ntinye yana gụnyere ngwugwu batrị), 3.47 kg (122.4 oz., gụnyere MR8901 × 4 na batrị batrị)
Ntuziaka ntuziaka × 1, Ntuziaka nha × 1, AC nkwụnye Z1002 × 1, Mpempe nchekwa × 1, eriri USB × 1, eriri ubu × 1, Disk ngwa (efegharị efegharị). viewer Wv, tebụl iwu nkwukọrịta, CAN Editor) × 1
Ụdị ngosi ntọala ihuenyo
8.4 inch SVGA-TFT agba LCD (800 × 600 ntụpọ, ihuenyo mmetụ), (oge axis 25
div × voltage axis 20 div, XY waveform 20 div × 20 div)
Ihuenyo gbawara agbawa nke Waveform (1, 2, ma ọ bụ 4), ihuenyo XY 1 & XY 2, ihuenyo oge axis + XY ihuenyo ebili mmiri, ngosipụta mpempe akwụkwọ (ibé “NIILE”, mpempe akwụkwọ 1 ruo 4
nhọrọ)
· Ngosipụta ebili mmiri
· Ngosipụta ebili mmiri n'otu oge na ihe nlele
Ụdị ngosi ihuenyo
Ngosipụta ebili mmiri, nlele na ntọala n'otu oge · Ngosipụta rịzọlt ebili mmiri n'otu oge na ngụkọ ọnụọgụ
· Waveform na A/B, C/D, E/F cursor ụkpụrụ gosipụtara n'otu oge
Ụdị ebili mmiri n'otu oge na ngosipụta uru ozugbo
Ihe nleba anya Waveform Hụ ụdị ebili mmiri na-enweghị ndekọ (ihuenyo ntọala, na-eche ihuenyo mkpagharị)
Ihe nleba anya uru n'ezie
Enwere ike nyochaa uru maka ọwa niile n'oge nha
(uru ozugbo, uru nkezi, uru PP, uru kacha, uru nkeji)
Gosipụta ọrụ
Pịgharịa n'ụdị ebili mmiri (pịgharịa azu azu site na eserese ngosi ihe ngosi gaa na
view ebili mmiri gara aga ọbụlagodi mgbe a na-edekọ)
Ntinye ihe nrịbama ihe omume na ọrụ ịwụ elu (ruo akara 1000) · Ntugharị Waveform (nke ọma / adịghị mma) · Ihe ngụpụta cursor (jiri A/B/C/D/E/F/cursors) · Ngosipụta Vernier (nke ọma) ampmgbanwe litude)
Nbugharị Waveform (na-ekewa ihuenyo ahụ n'ụzọ kwụ ọtọ; na-akwado ụdị ifegharị
nkwalite na ngosipụta n'ozuzu)
Ihe mkpuchi nke ifegharị (họrọ site na gbanyụọ, machie maka nha ọ bụla, na
machie na oge onye ọrụ họpụtara)
Akụkọ ihe mere eme nke waveform (nwere ike ịhọrọ ma gosipụta ihe ruru 16 data gara aga.)
Ọrụ nha (ndekọ dị elu)
Axis oge
200 s/div, 500 s/div, 1 ms/div ruo 500 ms/div, 1 s/div ruo 5 min/div
21 nso, mpụta sampling (max. 200 kS/s) Ogologo oge ndekọ na-echekwa oge na: 2 s/S (ruo ọwa 2), 5 s/S (ruo ọwa 8), 10 s/S (ruo ọwa 16) , 20 s/S (ruo ọwa 30), 50 s/S (ruo ọwa 64), 100 s/S (enweghị oke na ọnụ ọgụgụ nke
ọwa na-eji)
Izizi oge axis ± 0.0005%
Mkpebi axis oge 100 point/div
Ogologo ndekọ 25 ruo 20,000 div * 1 * 2, 50,000 div * 3, ma ọ bụ onye ọrụ-configurable si 5 (ya na MR8901 × 4, mgbagha na 80,000 div * 3 na 1 div increments na pulse ntinye anya) * 1 4 ch / modul, * 2 2 ch/modul, * 3 1 ch/modul
Mgbasa waveform / mkpakọ
Ogologo oge: × 10 ruo × 2 ma ọ bụ × 1, × 1/2 ruo × 1/50,000 Vol.tage axis: × 100 ruo × 2 ma ọ bụ × 1, × 1/2 ruo × 1/10 Ntọala oke elu na nke ala, ma ọ bụ ntọala ọnọdụ
Tupu ịkpalite
Oge mkpali na mmalite: Enwere ike ịdekọ data tupu akpalite maka oge atọrọ n'usoro n'usoro sitere na 0% ruo 100% nke ogologo ndekọ.
Post-akpalite
Oge mkpali na nkwụsị: Enwere ike ịdekọ data post-trigger maka nkeji oge n'usoro nke sitere na 0% ruo 40% nke ogologo ndekọ.
Nchekwa data ozugbo
Enwere ike ịhọrọ ịgbanwu/ gbanyụọ (nanị ichekwa ezigbo oge ma ọ bụ nchekwa akpaka) Ọrụ: A na-echekwa ebili mmiri dị ka data ọnụọgụ abụọ na kaadị ebe nchekwa SD n'oge ọ bụla. (Rịba ama: ọ nweghị ike ichekwa ozugbo na ebe nchekwa USB.
Jiri naanị kaadị ebe nchekwa SD Hioki rere.)
Nchekwa loop na-adịghị agwụ agwụ: ọhụrụ file na-edegharị nke kacha ochie file mgbe ike kaadị ebe nchekwa na-agba obere. (Cheta: hichapụ filenaanị na echekwara
megharịa ọnọdụ ịkpalite.)
Nchekwa nkịtị: Nchekwa na-akwụsị mgbe ike kaadị ebe nchekwa SD juru
Chekwa data akpaaka
Họrọ site na “gbanyụọ”, data waveform (ọnụọgụ abụọ ma ọ bụ CSV), nsonaazụ ngụkọ ọnụọgụ, yana ọrụ onyonyo (BMP ma ọ bụ PNG agbakwunyere): echekwara data na kaadị ebe nchekwa SD ma ọ bụ mkpanaka USB ozugbo ka ogologo ndekọ gachara. enwetara. Nchekwa loop na-adịghị agwụ agwụ: ọhụrụ file na-edegharị nke kacha ochie file Mgbe kaadị ebe nchekwa SD ma ọ bụ ike ebe nchekwa USB na-agba ọsọ dị mkpụmkpụ Nzọpụta nkịtị: nchekwa na-akwụsị mgbe kaadị ebe nchekwa SD ma ọ bụ ikike ebe nchekwa USB jupụtara.
Nchedo data
N'ihe omume nke ike ịtage n'oge na-azọpụta na nchekwa media, na file na-emechi wee mechie ike.
(Rịba ama: agbanyere ọrụ a nkeji iri na ise ka agbanwuchara ike.)
Na-ebu data sitere na mgbasa ozi
Enwere ike icheta data ọnụọgụ abụọ echekwara na kaadị ebe nchekwa SD ma ọ bụ mkpanaka USB site na ebe nchekwa MR8875 dị n'ime ebe nchekwa. .
Nkeji ebe nchekwa N/A
Ọrụ ịkpalite
Ụdị
Naanị otu, kwugharịa
N'oge
Malite, kwụsị, ma malite & kwụsị (enwere ike ịtọ ọnọdụ ịkpalite iche ka ọ malite
ma kwụsị)
Akpalite isi mmalite
· ịkpalite isi mmalite nke a na-ahọpụta maka ọwa ọ bụla. (Na-agba ọsọ mgbe niile
apụọla isi mmalite ndị na-akpalite)
· Ntinye analog: họrọ ihe ruru ọwa 4 maka modul ọ bụla · nsonaazụ mgbako nke ọwa: W1-1 ruo W4-2 · Ntinye uche: LA1 ruo LA4, LB1 ruo LB2 (4 channels x 2 probes), CAN L1 ruo 16 ( maka nkeji MR8904 ọ bụla). Enwere ike ịhazi ihe na-akpalite ụkpụrụ maka isi mmalite ọ bụla dị n'elu.
· Ntinye usu: P1, P2 (2 ọwa)
· Ntinye mpụga: mgbama ntinye gaa na ọdụ mpụta mpụga · Echiche NA/OR nke isi mmalite niile · Mmanye mkpalite ogbugbu: mkpa karịa isi mmalite ọ bụla ọzọ · Mkpalite etiti: a na-arụ ọrụ mkpalite na mmalite ndekọ, ọzọkwa na etiti oge ọ bụla.
Ụdị mkpali (analog, pulse)
· Ọkwa: a na-etinye ihe mkpalite mgbe voltage bilie ma ọ bụ daa. Ohere: na-edobe oke elu na ala nke ọkwa mkpalite
Ụdị mkpali (echiche)
Ụdị ịkpalite (ntinye mpụga)
· Ụkpụrụ mgbagha: settable ka 1, 0, ma ọ bụ × maka nyocha mgbagha ọ bụla · Enwere ike ịtọ ọnọdụ mkpalite (NA/OR) n'etiti ọwa ntinye mgbagha na nyocha ọ bụla.
Enwere ike họrọ bilie ma ọ bụ daa (max. ntinye ikike voltage 10 V DC) Na-ebili: a na-etinye ihe na-akpalite mgbe ọ na-ebili site na "Low" (0 ruo 0.8 V) na "Elu" (2.5 ruo 10 V) Falling: a na-etinye ihe mkpali mgbe ọ na-ada site na "Elu" (2.5 ruo 10 V) ) ka "Ọ dị ala" (0 ruo 0.8 V) ma ọ bụ ruo obere mkpirisi. Ihe nzacha na-akpalite mpụga na obosara nzaghachi: Mgbe nzacha mpụga kwụsịrị: oge dị elu bụ 1 ms ma ọ bụ karịa, yana obere oge 2 s ma ọ bụ obere Mgbe nzacha mpụga dị: oge dị elu bụ 2.5 ms ma ọ bụ karịa, yana obere oge bụ 2.5. ms ma ọ bụ obere
Mkpebi ọkwa ịkpalite
· Analog: 0.1% fs (fs = 20 div) (Cheta: ya na CAN Unit MR8904,
Mkpebi na-agbanwe dabere n'ogologo nke CAN kọwara.)
· Mgbakwunye mkpụrụ akụ: 0.002% fs, · Ọnụ ọgụgụ ntụgharị ụda: 0.02% fs (fs = 20 div)
Mbupụta ihe nzacha na-akpalite
Tọọ site na ọnụọgụ nke samples (isi 10 ruo 1000, ma ọ bụ gbanyụọ)
· Mmepụta mmiri nke mepere emepe (jiri 5 voltage mmepụta, arụ ọrụ ala) · mmepụta voltage: 4.0 ruo 5.0 V (ọkwa dị elu), 0 ruo 0.5 V (ọkwa dị ala) · obosara ihe mmepụta ihe: ọkwa a na-ahọrọ ma ọ bụ ọkwa ọkpụkpụ: sampling period × (ọnụọgụ data mgbe akpalite ewepụrụ otu) ma ọ bụ karịa (2 s ma ọ bụ karịa) Pulse: 2 ms ± 10%
13
Ọrụ mgbako
Enwere ike ịme ihe ruru 2 ngụkọ kwa modul n'otu oge -
nke ọma.
· Modul enwere ike ịgbakọ: Ngalaba Analog MR8901, Voltage/
Nkeji oyi MR8902, ngalaba nsogbu MR8903
Ogologo oge n'etiti-
* Mgbakọ inter-channel bụ naanị otu modul.
mgbako ọwa
* A ga-enwe nkwarụ na ntọala nyocha ma ọ bụrụ na ọwa ha nwere agbakọ na ya.
* Enwere ike ịbawanye nsonaazụ mgbako.
* Mgbakọ n'etiti ihe dị iche iche setịpụrụ onye ọrụ na MR8902 na
akwadoghị MR8903.
· Mgbakọ: mgbakwunye, mwepu, otutu
Ngụkọ ọnụọgụgụ
Enwere ike ịgbakọ ihe ruru 8 n'otu oge · Ebe nchekwa mgbako: ebe nchekwa dị n'ime · Mgbakọ: nkezi, dị irè (rms), ọnụ ọgụgụ kacha elu, uru kachasị, oge ruo uru kachasị, uru kacha nta, oge ka ọ dị obere-
uru mama, oge, ugboro, oge ịrị elu, oge ọdịda, uru mpaghara, uru mpaghara XY, mgbanwe ọkọlọtọ, oge ọkwa akọwapụtara, ọkwa oge akọwapụtara, obosara usu, oke ọrụ, ọnụọgụ usu, ọdịiche oge,
ọdịiche nke oge, ọkwa dị elu, ọkwa dị ala, mgbako mgbakọ na mwepụ. Enwere ike ịchekwa nsonaazụ mgbako na kaadị ebe nchekwa SD ma ọ bụ mkpanaka USB. Oke mgbako: họrọ site na data nha niile ma ọ bụ n'etiti cursors A/B ma ọ bụ C/D · Ịchekwa nsonaazụ mgbako na akpaghị aka na usoro CSV na kaadị SD ma ọ bụ mkpanaka USB.
Mgbakọ Waveform
Enwere ike ịrụ ọrụ ruru 8 n'otu oge. · Ebe nchekwa mgbako: ebe nchekwa ime · Mgbakọ: mgbako bụ isi, ụkpụrụ zuru oke, exponents, logarithms nkịtị, mgbọrọgwụ square, iche (usoro nke mbụ na nke abụọ),
integrals (usoro nke mbụ na nke abụọ), nkezi na-akpụ akpụ, ogologo oge-axis na-akpụ akpụ, arụmọrụ trigonometric (SIN, COS, TAN), arụmọrụ trigonometric inverse (ASIN, ACOS, ATAN), ọrụ nzacha FIR, ọrụ nzacha IIR, nkezi ụkpụrụ, kacha ụkpụrụ, ụkpụrụ kacha nta, ọkwa n'oge · Mgbakọ mkpokọta: data nha niile; Enwere ike ịhọrọ mpaghara n'etiti cursors A/B na C/D.
Mgbakọ FFT
Enwere ike ịme ihe ruru 4 mgbako n'otu oge. · Ebe nchekwa mgbako: ebe nchekwa dị n'ime · Usoro mgbako: otu, ikwugharị · Ọnụ ọgụgụ nke isi: 1,000 ruo 10,000 · Ọnụ ọgụgụ nke mwụda: akpaka, 100 ruo 10,000
* Enwere ike ịtọ ya naanị mgbe ọnọdụ mgbako bụ “Tigharịa”.
· Ọrụ mpio: windo akụkụ anọ, Hanning, Hamming, Blackman, Blackman-Harris, flat top, exponential · Nkezi: gbanyụọ, nkezi dị mfe, nkezi akara, njide kacha elu · Ụgwọ: ọ dịghị, ike, nkezi · Ngosipụta ọnụ ahịa kacha elu: gbanyụọ, mpaghara Uru kachasị, uru kacha elu · Ọnọdụ nyocha: gbanyụọ, ụdịdị dị iche iche, ụdịdị RMS, ụdị ike dị iche iche, ọrụ nnyefe, ụdị ike dị iche iche, ọrụ ịdị n'otu, ụdịdị ụdịdị dị iche iche · Ọnụ ọgụgụ ngosipụta: ọnụ ọgụgụ ahịrị, ọnụ ọgụgụ ndekọ.
Nlele
Nsonaazụ nlele mgbakọ na mwepụ: GO/STOP (ya na mmepụta 5V mepere emepe)
Ọrụ ndị ọzọ
Mpụga sampling
Ntinye kacha elu: ruo 10 V DC Oge ntinye kacha elu: 200 kHz
Ọnọdụ mgbaàmà ntinye: ọkwa dị elu 2.5 ruo 10 V, Ọkwa dị ala 0 ruo 0.8 V, obosara Pulse dị elu ma ọ bụ dị ala 2.5 s ma ọ bụ karịa
Ndị ọzọ
· Ịtụgharị, ntinye nkọwa, họrọ site na oge, ụbọchị na ọnụọgụ data maka ngosipụta axis kwụ ọtọ, mkpọchi igodo · Mgbanyụ ma ọ bụ gbanyụọ ụda ụda · Ntọala nke akpaaka (na-edobe s kacha mma na-akpaghị aka.ampling ọnụego na
ampoke litude)
Jide ọnọdụ mmalite (mgbe ike kwụsịrị n'oge ndekọ,
nha ga-amalite na-akpaghị aka ka eweghachite ike)
Nwelite akpaaka (na-eburu ntọala na-akpaghị aka files echekwara na esịtidem ebe nchekwa ma ọ bụ
kaadị SD)
Chekwa ọnọdụ ntọala na ebe nchekwa dị n'ime (ruo ọnọdụ 6) · Chekwa data akwụkwọ ntuziaka
Ngalaba ntinye mkpụrụ akụ
Nọmba nke ọwa
Ọwa 2, ụdị ntinye bọtịnụ, abụghị nke dịpụrụ adịpụ (GND
ya na isi unit)
Ụdị
Ntughari, ntinye
Ọrụ mmesho
Ntugharị kewara ekewa: 1 ruo 50,000 ọnụ ọgụgụ (nọmba ntụgharị: ọnụ ọgụgụ nke pulses
kwa ntughari; mwekota: ọnụ ọgụgụ nke pulses kwa ọnụ)
· Oge: họrọ site na “mmalite ọnụ na mkpalite” ma ọ bụ “n'isi mmalite nha”. · Usoro njikọta: họrọ site na “mmekọrịta site na mmalite nha” ma ọ bụ “uru ozugbo na s nke ọ bụla.ampling period” · Nhazi nke mwekota oke eruba: họrọ ma “uru ga-alaghachi na 0 wee na-agụta na-aga n'ihu” ma ọ bụ “steeti njupụta na-adịgide”
Ụdị ntinye
Enweghị voltage `a' kọntaktị (na-emeghe kọntaktị), no-voltage `b' con-
akọ (nke na-adịkarị mkpụmkpụ kọntaktị), onye nchịkọta mepere emepe ma ọ bụ voltage ntinye · Nguzogide ntinye: 1.1 M
Oke. ntinye ikike 0 V ruo 50 V DC (max. voltage n'etiti ntinye ntinye nke na-adịghị akpata mmebi)
Oke. gosiri voltage n'etiti ọwa
Ọ bụghị iche (GND nkịtị nwere ngalaba isi)
Oke. gosiri voltage to Earth Ọ bụghị iche (GND nkịtị na isi unit)
Ọkwa nchọpụta
4 V: (elu: karịa 4.0 V, ala: 0 ruo 1.5 V) 1 V: (elu: karịa 1.0 V, ala: 0 ruo 0.5 V)
Oge ntinye mkpụrụ akụ
Na nzacha agbanyụrụ: 200 s ma ọ bụ karịa (ma elu na obere oge ga-abụrịrị opekata mpe 100 s) Na nzacha na: 100 ms ma ọ bụ karịa (ma oge dị elu na nke dị ala ga-abụrịrị opekata mpe 50 ms)
Nzacha mkpọda
Gụọ n'ọnụ ọnụ na-arị elu, ma ọ bụ gụọ na ọdịda ihu Chatter mgbochi ihe nzacha (gbanyụọ ma ọ bụ gbanyụọ)
Nhazi oke mkpebi
Oke nha
2,500 c/div 25 kc/nkewa
1 c/LSB 10 c/LSB
0 ruo 65,535 c 0 ruo 655,350 c
250 kc/div 100 c/LSB
0 ruo 6,553,500 c
5 Mc/div
2 kc/LSB
0 ruo 131,070,000 c
125 Mc/div Ntụgharị: 250 [r/s] / div
50 kc/LSB 1 [r/s]/LSB
0 ruo 3,276,750,000 c 0 ruo 5,000 [r/s]
n Oge kachasị ka ịdekọ na ebe nchekwa dị n'ime
* MR8875 nwere ike ịchekwa ihe ruru ọwa 16 nke data kwa modul. Eserese dị n'okpuru na-egosi ọwa 16 n'ihi na ọ na-elele nchekwa kwa otu. Agbanyeghị nkeji niile a na-eji ga-eso otu oge ndekọ kacha.
* Esemokwu arụnyere arụnyere, yana pulses P1 na P2 nke ọ bụla na-eji ikike ya na otu ọwa analọgụ.
n Mpụga ọdịdị na akụkụ
Oghere ntinye modul (maka ihe ruru modul ntinye 4)
84 mm
Ọnụọgụ ọwa a ga-eji
9 ch ruo 16 CH
5 ch ruo 8 CH
3ch ruo 4 ch
2 CH
1 CH
Axis oge
Sampogologo oge
5,000 div
10,000 div
20,000 div 40,000 div 80,000 div
200 s/nkewa
2 s
1 s
2 s
4 s
8 s
16 s
500 s/nkewa
5 s
2.5 s
5 s
10 s
20 s
40 s
1 ms/nkewa 10 s
5 s
10 s
20 s
40 s
1 nkeji 20 s
2 ms/nkewa 20 s
10 s
20 s
40 s
1 nkeji 20 s
2 nkeji 40 s
5 ms/nkewa 50 s
25 s
50 s
1 nkeji 40 s
3 nkeji 20 s
6 nkeji 40 s
10 ms/nkewa 100 s
50 s
1 nkeji 40 s
3 nkeji 20 s
6 nkeji 40 s
13 nkeji 20 s
20 ms/nkewa 200 s
1 nkeji 40 s
3 nkeji 20 s
6 nkeji 40 s
13 nkeji 20 s
26 nkeji 40 s
50 ms/nkewa 500 s
4 nkeji 10 s
8 nkeji 20 s
16 nkeji 40 s
33 min 20 s 1 awa 06 nkeji 40 s
100 ms/div 1 ms
8 nkeji 20 s
16 nkeji 40 s
33 min 20 nkeji 1 elekere 06 nkeji 40s 2 elekere 13 nkeji 20 nkeji
200 ms/div 2 ms
16 nkeji 40 s
33 min 20s 1 h 06 min 40s 2 h 13 min 20s 4 h 26 min 40 s.
500 ms/div 5 ms
41 min 40s 1 h 23 min 20s 2 h 46 min 40s 5 h 33 min 20s 11 h 06 min 40 s.
1 s/div 10 ms 1 h 23 min 20 s 2 h 46 min 40 s 5 h 33 min 20 s 11 h 06 min 40 s 22 h 13 min 20 s .
2 s/div 20 ms 2 h 46 min 40 s 5 h 33 min 20 s 11 h 06 min 40 s 22 hr 13 min 20 s 1 d 20 h 26 min 40 s
5 s/div 50 ms 6 h 56 min 40s 13 h 53 min 20 s 1 d 03 h 46 min 40 s 2 d 07 h 33 min 20 s 4 d 15 h 06 min 40 s
10 s/div 100 ms 13 h 53 min 20 s 1 d 03 h 46 min 40 s 2 d 07 h 33 min 20 s 4 d 15 h 06 min 40 s 9 d 06 h 13 min 20 s
30 s/div 300 ms 1 d 17 h 40 min 3 d 11 elekere 20 min 6 d 22 elekere 40 min 13 d 21 elekere 20 min 27 d 18 elekere 40 min
50 s/div 500 ms 2 d 21 h 26 min 40 s 5 d 18 h 53 min 20 s 11 d 13 h 46 min 40 s 23 d 03 h 33 min 20 s 46 d 07 h 06 min 40 s
60 s/div 600 ms 3 d 11 h 20 min 6 d 22 elekere 40 min 13 d 21 elekere 20 min 27 d 18 elekere 40 min 55 d 13 elekere 20 min
100 s/nkewa 1.0 s 5 d 18 h 53 min 20 s 11 d 13 h 46 min 40 s 23 d 03 h 33 min 20 s 46 d 07 h 06 min 40 s 92 d 14 h 13 min 20
2 min/ikara 1.2 s 6 d 22 h 40 min 13 d 21 h 20 min 27 d 18 h 40 min 55 d 13 h 20 min 111 d 02 h 40 min
5 min/ikara 3.0 s 17 d 08 h 40 min 34 d 17 h 20 min 69 d 10 h 40 min 138 d 21 h 20 min 277 d 18 h 40 min
Ọkụ ọkụ mpụga
(ahịrị 3, mmepụta +5 V, GND nkịtị na GND ahụ)
Ọnụ nyocha ihe mgbagha (4 ch × 2 probes) LAN na USB
224 mm
Maka ihe nkwụnye ọkụ AC Z1002 ike, ma ọ bụ ike DC (10V ruo 28V)
298 mm
Ọnụ njikwa mpụga
Oghere kaadị SD
14
n nkọwapụta nhọrọ ( rere iche)
n MR8902 nkọwa
Oghere nkwụnye maka modul ntinye
Ebumnuche nha
Ntinye modul
Oke nha
Mkpebi
Voltage
Ugbu a RMS AC voltage
Okpomọkụ (thermocouple)
Ihe analog nke MR8901
100mV fs ka 200V fs
4 .V
Ihe analog nke MR8905
10V fs ruo 1000V fs
400 .V
Voltage/Temp Unit MR8902 10 mV fs ruo 100V fs
0.5 .V
Ngalaba eriri MR8903
1 mV fs ruo 20 mV fs
0.04 .V
Unit Analog MR8901 + ihe mmetụta dị ugbu a ọzọ
Dabere na sensọ (s) dị ugbu a eji * Ụfọdụ ihe mmetụta dị ugbu a chọrọ 1/1250 div dị iche
ịnye ọkụ
Ihe analog nke MR8905
10V rms fs ruo 700Vrms fs
400 .V
Ngalaba Analog MR8901 + ihe nyocha dị iche iche 9322
100V rms ka 1 kV rms
1/1250 div
200°C fs ruo 2000°C fs Voltage/Temp Unit MR8902 * Oke oke na nke ala dabere na 0.01°C
thermocouple na-eji
Mgbagwoju anya, ngalaba mgbakasị ahụ MR8903
400 µ ruo 20,000 µ fs
0.016 µ
Nyochaa akara CAN CAN Unit MR8904
*CAN FD akwadoghị
Kọntaktị nyefee, voltage gbanye/ gbanyụọ
Nyocha echiche 9320-01
Volta AC/DCtage gbanyụọ / gbanyụọ Logic Probe MR9321-01
2 ọdụ ụgbọ mmiri/otu
* Ihe ruru ọwa analọgụ iri na ise, nke ọ bụla dabara na mgbama analọgụ 15-bit
* Ruo ọwa mgbagha 16, nke ọ bụla dabara na mgbama mgbaama 1-bit
Na-adabere na mgbagha nyocha na-eji
* Max. ntinye 50 V, ọnụ ụzọ +1.4/+2.5/+4.0 V * Kpọtụrụ mkpụmkpụ/oghe, na-abụghị vol.tage
N/AN/A
Na-adabere na mgbagha nyocha na-eji
* Ruo 250 V AC / DC, na-achọpụta ndụ ma ọ bụ na ọ naghị adị ndụ
N/A
Thermocouples
Ịtọ ntọala
(ọnụọgụ zuru ezu = 20 div)
Mkpebi
Oke nha
Izi ezi
10 Celsius C / div
0.01°C
-100C ruo ihe na-erughị 0°C 0°C ruo 200°C
±0.8°C ±0.6°C
K
50°C
0.05°C
-200C ruo ihe na-erughị -100°C -100°C ruo 1000°C
±1.5°C ±0.8°C
100°C
0.1°C
-200C ruo ihe na-erughị -100°C -100°C ruo 1350°C
±1.5°C ±0.8°C
10 Celsius C / div
0.01°C
-100C ruo ihe na-erughị 0°C 0°C ruo 200°C
±0.8°C ±0.6°C
J
50°C
0.05°C
-200C ruo ihe na-erughị -100°C -100°C ruo 1000°C
±1.0°C ±0.8°C
100°C
0.1°C
-200C ruo ihe na-erughị -100°C -100°C ruo 1200°C
±1.5°C ±0.8°C
10 Celsius C / div
0.01°C
-100C ruo ihe na-erughị 0°C 0°C ruo 200°C
±0.8°C ±0.6°C
-200C ruo ihe na-erughị -100C
±1.5C
50°C
0.05°C
-100C ruo ihe na-erughị 0°C
±0.8C
E
0°C ruo 1000°C
±0.6C
-200C ruo ihe na-erughị -100C
±1.5C
100°C
0.1°C
-100C ruo ihe na-erughị 0°C
±0.8C
0°C ruo 1000°C
±0.6C
10 Celsius C / div
0.01°C
-100C ruo ihe na-erughị 0°C 0°C ruo 200°C
±0.8°C ±0.6°C
-200C ruo ihe na-erughị -100C
±1.5C
50°C
0.05°C
-100C ruo ihe na-erughị 0°C
±0.8C
T
0°C ruo 400°C
±0.6C
-200C ruo ihe na-erughị -100C
±1.5C
100 Celsius C
0.1°C
-100C ruo ihe na-erughị 0°C
±0.8C
0°C ruo 400°C
±0.6C
Mara: A na-enweta izi ezi nke thermocouple site na ịgbakwụnye nkwụghachi ụgwọ nrụtụ aka nke ± 0.5°C
Akụkụ, arọ: ihe ruru. 119.5W × 18.8H × 151.5D mm (4.70W × 0.74H × 5.96D n'ime.), ihe ruru. 180g (6.3 oz.) Ngwa: Ọ dịghị
Unit Analog MR8901 (nke ziri ezi na 23 ± 5 ° C [73 ± 9 ° F], 20 ruo 80% rh mgbe 30 min. nke oge ikpo ọkụ na mgbanwe efu; ziri ezi kwere nkwa maka afọ 1)
Ọrụ
Nọmba nke ọwa: 4, maka voltage nha
Ntinye njikọ
Njikọ BNC dịpụrụ adịpụ (ntinye ntinye 1 M, ikike ntinye 10 pF) Max. gosiri voltage ruo ụwa: 100 V AC rms ma ọ bụ 100 V DC (ntinye dịpụrụ adịpụ na isi unit, max. vol.tage nke enwere ike itinye n'etiti ntinye ntinye -
nels na chassis, na n'etiti ọwa ntinye na-enweghị mmebi)
5 mV ruo 10 V/div, 11 ranges, zuru oke: 20 div nha nha * AC vol.tage nwere ike tụọ / gosi: ruo 140 V rms na × 1/2 amplitude
mkpakọ, mana oke na 100 V rms bụ oke. gosiri voltage n'uwa
Ihe nzacha dị ala
Nzacha dị ala: 5 Hz, 50 Hz, 500 Hz, 5 kHz, gbanyụọ
Mkpebi
1/1250 nke nha nha (iji 16-bit A/D ntụgharị)
Kachasị sampling ọnụego 500 kS/s (otu oge sampna-agafe ọwa 4)
Izi ezi
± 0.5% nke ọnụ ọgụgụ zuru oke (ya na nzacha 5 Hz, nha ọnọdụ efu gụnyere)
Njirimara ugboro ugboro DC ruo 100 kHz, -3 dB
Ntinye ntinye
DC/GND
Oke. ntinye ikike 150V DC (max. voltage nke enwere ike itinye n'ofe ntinye ntinye na-enweghị mmebi)
Akụkụ, arọ: ihe ruru. 119.5W × 18.8H × 184.8D mm (4.70W × 0.74H × 7.28D n'ime.), ihe ruru. 190 g (6.7 oz.) Ngwa: ferrite clamp × 2
Voltage/Temp Unit MR8902 (nke ziri ezi na 23 ± 5°C [73 ± 9°F], 20 ruo 80% rh mgbe nkeji 30 nke oge ikpo ọkụ na mgbanwe efu; ziri ezi kwere nkwa maka otu afọ)
Ọrụ
Nọmba nke ọwa: 15, maka voltage/okpomọkụ nha (a na-ahọrọ maka ọwa ọ bụla)
Ntinye njikọ
Voltagntinye e/thermocouple: ọnụ ọkpọ bọtịnụ akwadoro dayameta waya akwadoro: otu-waya 0.32 mm ruo 0.65 mm, eriri eriri 0.08 ruo 0.32 mm2 ( dayameta waya conductor min. 0.12
mm), AWG 28 ruo 22 Ntinye ntinye: 1 M Max. gosiri voltage ruo ụwa: 100 V AC rms ma ọ bụ 100 V DC (ntinye dịpụrụ adịpụ na isi unit, max. vol.tage nwere ike tinye n'etiti
ọwa ntinye na chassis, yana n'etiti ọwa ntinye na-enweghị mmebi)
500V/div ruo 5V/div, 9 ranges, zuru oke: 20 div * AC ozugbo
Voltage
voltagenweghị ike tụọ e waveform n'ihi nwayọ sampọsọ ọsọ.
nha nha mkpebi mkpebi: 1/1000 nke nha nha (iji 16-bit A/D ntụgharị)
Nzizi: ± 0.1% fs (nwere nzacha dijitalụ na, izi ezi ọnọdụ efu)
Oke nha okpomọkụ
Nkwụghachi ụgwọ nkwụsịtụ ntụaka: n'ime/mpụta (nke a na-ahọrọ) Nchọpụta waya gbajiri agbaji: gbanye/ gbanyụọ (nhọrọ na-emetụta akụkụ dum)
Ụdị thermocouple: K, J, E, T, N, R, S, B, WRe5-26 * Maka nha nha nke thermocouple, mkpebi na izi ezi, rụtụ aka na tebụl nkọwa dị n'okpuru.
Nzacha dijitalụ
50 Hz, 60 Hz, ma ọ bụ gbanyụọ
Ọnụego ume ọhụrụ data
10 ms (nwere nzacha, gbanyụọ nchacha ọkụ) 20 ms (nwere nzacha nzacha, nchọpụta ọkụ na) 500 ms (na nzacha na, ọnụego ume ọhụrụ data: ngwa ngwa) 2 s (na nzacha na, ọnụego ume ọhụrụ data: nkịtị)
Oke. ntinye ikike 100V DC (max. voltage nke enwere ike itinye n'ofe ntinye ntinye na-enweghị mmebi) 100 V DC (max. voltage nwere ike itinye n'ofe ọwa ntinye na-enweghị mmebi.)
Oke. ndenye enwere ike ime ka ọwa ndị ahụ kpuchie site na relays semiconductor. Ọ bụrụ na voltage gafee ọwa ntinye gafere nkọwa ngwaahịa ka etinyere n'etiti ntinye
ọwa, dị ka ọkụ ọkụ, ọ nwere ike ịkpata ọdịda sekit dị mkpụmkpụ
nke semiconductor relay. Biko mee ụdị voltage etinyeghị ya.
Akụkụ, arọ: ihe ruru. 119.5W × 18.8H × 151.5D mm (4.70W × 0.74H × 5.96D n'ime.), ihe ruru. 173 g (6.1 oz.) Ngwa: eriri ntụgharị × 2 (njikọ njikọ: TAJIMI PRC03-12A10-7M10.5)
Ngalaba eriri MR8903
(nke ziri ezi na 23 ± 5°C [73 ± 9°F], 20 ruo 80% rh mgbe nkeji 30 nke oge ikpo ọkụ na akpaaka; ekwenyeziri izi ezi maka afọ 1)
Ọrụ
Nọmba nke ọwa: 4, maka voltagnha e/strain (nke a na-ahọrọ maka ọwa ọ bụla, njikwa akpaaka eletrọnịkị, nha nha nha n'ime ± 10,000
V, ± 10,000)
Ntinye njikọ
Akụkụ akụkụ: "HDR-EC14LFDTG2-SLE +" nke Honda Tsushin Kogyo Co., Ltd. Japan mere site na eriri ntụgharị, "PRC03-12A10-7M10.5" nke Tajimi Electronics Co., Ltd. Japan Max mere. gosiri voltage ruo ụwa: 33 V AC rms ma ọ bụ 70 V DC (ntinye dịpụrụ adịpụ na isi unit, max. vol.tage nwere ike itinye n'etiti ọwa ntinye na chassis, na n'etiti ọwa ntinye na-enweghị mmebi)
transducer dabara adaba
Ihe ntụgharị ihe nleba anya, mgbochi mmiri: 120 ruo 1k, akwa voltage: 2 V ± 0.05 V, Ọnụego nlele: 2.0
Nguzogide ntinye
Karịrị 1M
Voltage nha nso
50 V / div na 1,000 V / div, 5 ranges, zuru oke: 20 div Izizi: ± 0.5% fs + 4 V (na 50 V / div naanị), ọkwa ndị ọzọ ± 0.5% fs
(mgbe nhazichara akpaaka, yana nzacha 5 Hz, agụnyere izi ezi ọnọdụ efu)
Ogologo nha nha
20 / div na 1,000 / div, ọkwa 6, ọnụ ọgụgụ zuru oke: 20 div nke ziri ezi: ± 0.5% fs + 4 (na 20, 50 / div), ọkwa ndị ọzọ ± 0.5% fs
(mgbe nhazichara akpaaka, yana nzacha 5 Hz, agụnyere izi ezi ọnọdụ efu)
Ihe nzacha dị ala
Nzacha dị ala: 5 Hz, 10 Hz, 100 Hz, 1 kHz, gbanyụọ
Mkpebi
1/1250 nke nha nha (iji 16-bit A/D ntụgharị)
Kachasị sampling ọnụego 200 kS/s (otu oge sampna-agafe ọwa 4)
Njirimara ugboro ugboro DC ruo 20 kHz, +1/-3 dB
Oke. ntinye ikike 10V DC (max. voltage nke enwere ike itinye n'ofe ntinye ntinye na-enweghị mmebi)
Akụkụ, arọ: ihe ruru. 119.5W × 18.8H × 151.5D mm (4.70W × 0.74H × 5.96D n'ime.), ihe ruru. 185g (6.5 oz.), Ngwa: ọ dịghị
CAN Unit MR8904* *CAN FD akwadoghị
Ntinye CAN ọdụ ụgbọ mmiri Standards Interface ACK nnyefe Terminator Baud ọnụego enyochala ọwa mmepụta mgbaàmà
Ụdị mgbaàmà
Mkpalite ID
Oge nzaghachi Nyefee ozi CAN
Ọnụọgụ ọdụ ụgbọ mmiri: 2, njikọ: D-sub nwoke 9 pin × 2
ISO 11898 nwere ike 2.0b, ISO 11898-1, ISO 11898-2, ISO 11898-3, SAE J2411 Nhọrọ: elu-ọsọ CAN, obere ọsọ CAN, ma ọ bụ otu-waya CAN site n'ọdụ ụgbọ mmiri (nke arụnyere na transceiver kwekọrọ ekwekọ) Gbanyụọ ma ọ bụ maka ịnyefe ACK maka ịnata akara ngosi CAN na MR8904
Gbanyụọ / gbanyụọ site na iwu, 120 ± 10 arụnyere nguzogide 50 kbps ruo 1 Mbps na "Ọsọ ọsọ", 10 kbps ruo 125 kbps na "Lowspeed", 10 kbps ruo 83.3 kbps na "Single-waya"
Ihe ruru ọwa analọgụ iri na ise nke ọ bụla dabara na mgbama analọgụ 15-bit Ruo ọwa mgbagha iri na isii nke ọ bụla dabara na mgbama mgbagha 16-bit.
1-bit mgbaàmà: 1 ọwa nke mgbagha, ma ọ bụ 1 ọwa nke analọg 1-bit ka 16-bit mgbaàmà: 1 ọwa nke analọg 17-bit ka 32-bit mgbaàmà: 2 ọwa nke analọg * enweghị ike ijikwa akara n'elu 32-bit.
Mpụta “H” n'ọkwa ọwa ezi uche a họpụtara mgbe ị na-anata akara ngosi ID setịpụrụ * obosara ubu mmepụta: 50 s n'okpuru 5 ms/div axis, 1 s.ampogologo oge na ihe karịrị 10 ms/div oge axis
N'ime 200 s mgbe ị nwetachara ozi CAN kpamkpam
Nwere ike izipu ozi CAN setịpụrụ na ụgbọ ala CAN n'otu ọdụ ụgbọ mmiri
n nkọwapụta nhọrọ ( rere iche)
n CAN nkọwapụta (software jikọtara ya na MR8904) (Ụkpụrụ ndị a
*CAN FD akwadoghị
bụ maka otu MR8904)
gburugburu ebe ọrụ
Windows 8 / 8.1 (32-bit / 64-bit) Windows 10 (32-bit / 64-bit): ọrụ kwadoro
Enwere ike ịtọ ntọala nkọwa
NJ ozi nwere ike, mmalite ọnọdụ, ogologo data usoro data: U/L (Motorola), L/U (Motorola), L/U (Intel) Koodu: enweghị akara, 1-binyere aka, 2-binyere aka
Nwere ike db file
Ibu nwere ike db file Tugharia na ".cdf" file
Debanye aha na ndetu (edezi adịghị), 33-bit data na n'elu anaghị akwado
Tugharia usoro data: Motorola (CANdb file) ka U/L (Motorola) ·Tụgharịa koodu file (CANdb file) ka 2-binye aka, IEEE sere n'elu ma ọ bụ okpukpu abụọ (CANdb fileakwadoghị ·Tụgharịa aha mgbaama (CANdb file) gaa na labelụ ·Tụgharịa okwu (CANdb file) na aha mgbama
Ntọala ndebanye aha
Ị nwere ike itinye ntọala ọdụ ụgbọ mmiri: ọdụ ụgbọ mmiri 1, ọdụ ụgbọ mmiri 2, nọmba ihe: 1 ruo 200 Ịtọpụta ihe ngosi elu / nke dị ala na ihuenyo MR8875
· Interface: elu-ọsọ, obere ọsọ, otu waya
Ihe nkwụsị: ịgbanwuo ma ọ bụ gbanyụọ (agbanyere na "Ọsọ dị elu" naanị)
Nwere ike nkwurịta okwu · ACK: gbanye/ gbanyụọ
ntọala
Ọnụego baud: AUTO (gbanyere naanị ACK)
50 kbps ruo 1 Mbps na "Ọsọ dị elu", 10 kbps ruo 125 kbps na "Low-
ọsọ", 10 kbps ruo 83.3 kbps na "otu waya"
Ntọala ọwa analog
Ọnụọgụ ọwa: 15
Kee nkọwa na ndepụta ndebanye aha n'okpuru 16-bit ka ọwa 1 · Kenye nkọwa na ndepụta ndebanye aha maka ọwa 17-bit ruo 32-bit ruo 2.
Ntọala ọwa mgbagha
Ọnụọgụ ọwa: 16
Kee nkọwa na ndepụta ndebanye aha n'okpuru 16-bit, na ọnọdụ bit · Kenye nkọwa na ndepụta ndebanye aha na mkpalite ID.
Ntọala nnyefe
Nọmba nnyefe, ọnọdụ, CAN mmepụta ọdụ ụgbọ mmiri, ụdị etiti, NJ nnyefe, ogologo byte nnyefe, data nnyefe, NJ azịza,
oge nnyefe
Mmekọrịta ya na MR8875
Chọọ MR8875 site na USB, ndebanye aha, ntọala nkwurịta okwu CAN, ntọala ọwa analog, ntọala ọwa mgbagha, nnyefe
ozi ntọala, wdg.
Ọrụ obibi akwụkwọ
Ndepụta ndebanye aha, ihe niile nke ntọala nkwurịta okwu CAN, ndepụta analog ekenyere, ndepụta mgbagha ekenye, ihe niile nke ntọala nnyefe
Chekwaa ọrụ
Enwere ike ịkọwa data: ụdị ọnụọgụ abụọ, “.cdf” ndọtị, na-agbanwe na sọftụwia maka Model Hioki 8910 ịtọ ụbọchị (ọdịnaya niile na-enweghị nkọwa nkọwa CAN): ụdị ọnụọgụ abụọ, ndọtị “.ces”
Akụkụ, arọ: ihe ruru. 119.5W × 18.8H × 151.5D mm (4.70W × 0.74H × 5.96D n'ime.), ihe ruru. 185g (6.5 oz.), Ngwa: ọ dịghị
Unit Analog MR8905 (nke ziri ezi na 23 ± 5°C [73 ± 9°F], 20 ruo 80% rh mgbe 30 min. nke oge ikpo ọkụ na mgbanwe efu; ekwenyere izi ezi maka afọ 1)
Ọrụ
Nọmba ọwa: 2, nwere ike ịgbanwe n'etiti ụkpụrụ ozugbo yana ụkpụrụ AC RMS
Ntinye njikọ
Njikọ banana (mmetụta ntinye 4M, ikike ntinye na-erughị 1 pF) Oke. gosiri voltage ruo ụwa: CAT II 1000 V AC & DC, CAT III 600 V AC & DC (ebe ọ bụ na ntinye dịpụrụ adịpụ na ngalaba isi, max. vol.tage nke enwere ike itinye n'etiti ọwa ntinye na chassis, na n'etiti ntinye ntinye -
nels enweghị mmebi)
500mV/div ruo 50V/div, 7 ranges, full scale: 20 div Atumatu nso * Oke kacha ngosi AC voltage bụ 700 Vrms mgbe ị na-eji 1/2 compres-
sion nke vetikal axis.
Ihe nzacha dị ala
5 Hz, 50 Hz, 500 Hz, 5 kHz, gbanyụọ
Mkpebi
1/1250 nke nha nha (iji 16-bit A/D ntụgharị)
Kachasị sampling ọnụego 500 kS/s (otu oge sampna-agafe ọwa 2)
Izi ezi
± 0.5% fs (na nzacha 5 Hz)
Nleta RMS
RMS ziri ezi: ± 1.5% fs (site na 30 Hz ruo ma ọ bụghị gụnyere 1 kHz, ntinye sine) ma ọ bụ ± 3% fs (1 kHz ruo 10 kHz, ntinye sine wave) Oge nzaghachi: 300 ms (nyochaa, na-ebili site na 0% ruo 90% fs) ma ọ bụ 600 ms
(nyochaa, na-ada site na 100% ruo 10% fs) Crest factor 2
Njirimara ugboro ugboro DC ruo 100 kHz, -3 dB
Ntinye ntinye
DC/AC-RMS/GND
Oke. ntinye ekwe ekwe
1000V DC, 700V AC (max. voltage nke enwere ike itinye n'ofe ntinye ntinye na-enweghị mmebi)
Ogologo eriri na ịdị arọ: eriri igwe isi 1.5 m (4.92 ft.), eriri ntinye akụkụ 1 m (3.28 ft.), Ihe ruru. 320 g (11.3 oz.) Rịba ama: Plọg akụkụ otu nke MR9321-01 dị iche na MR9321.
Nchọpụta ezi uche dị na ya MR9321-01
Ọrụ
Nchọpụta nke AC ma ọ bụ DC relay mbanye mgbama maka ndekọ steeti dị elu/ dị ala nwekwara ike iji maka nchọpụta nkwụsịtụ eriri ọkụ.
Ntinye
Ọwa 4 (nke dịpụrụ adịpụ n'etiti otu na ọwa), mgbanwe dị elu / dị ala na-agbanwe ntinye ntinye: 100 k ma ọ bụ karịa (oke elu), 30 k ma ọ bụ karịa (oke ala)
Nchọpụta mmepụta (H).
170 ruo 250 V AC, ± DC 70 ruo 250 V (oke dị elu) 60 ruo 150 V AC, ± DC 20 ruo 150 V (oke ala)
Nchọpụta mmepụta (L).
0 ruo 30 V AC, ± DC 0 ruo 43 V (oke dị elu) 0 ruo 10 V AC, ± DC 0 ruo 15 V (oke ala)
Oge nzaghachi
Ọnụ na-ebili 1 ms max., ihu ọdịda 3 ms max. (na oke oke na 200V
DC, ala dị ala na 100V DC)
Oke. ntinye ikike 250 Vrms (oke elu), 150 Vrms (oke ala) (vol kacha elutage nwere ike ịbụ
etinyere n'ofe ntinye ntinye na-enweghị mmebi)
15
Ogologo eriri na ịdị arọ: eriri igwe isi 1.5 m (4.92 ft.), eriri ngalaba ntinye 30 cm (0.98 ft.), Ihe ruru. 150 g (5.3 oz.) Rịba ama: nkwụnye otu akụkụ nke 9320-01 dị iche na 9320.
Amụma ezi uche dị na ya 9320-01
Ọrụ
Nchọpụta nke voltage mgbama ma ọ bụ relay kọntaktị maka ndekọ elu/ala ala
Ntinye
Ọwa 4 (ala a na-ahụkarị n'etiti otu na ọwa), ntinye dijitalụ / kọntaktị, mgbanwe (ntinye kọntaktị nwere ike ịchọpụta akara ndị na-anakọta oghere)
Ntinye ntinye: 1M (ya na ntinye dijitalụ, 0 ruo +5V) 500 k ma ọ bụ karịa (site na ntinye dijitalụ, +5 V ka +50V)
Nkwụghachi nkwụghachi: 2k (ntinye kọntaktị: ebuliri n'ime ya ruo +5V)
Ọnụ ụzọ ntinye dijitalụ 1.4 V, 2.5 V, 4.0 V
Nguzogide nchọpụta ntinye kọntaktị
1.4 V: 1.5 k ma ọ bụ karịa (meghere) na 500 ma ọ bụ ala (mkpụmkpụ) 2.5 V: 3.5 k ma ọ bụ karịa (meghere) na 1.5 k ma ọ bụ ala (obere) 4.0 V: 25 k ma ọ bụ karịa (emeghe) na 8 k ma ọ bụ ala. (obere)
Achọpụtara obosara usu 500 ns ma ọ bụ karịa
Oke. ntinye ekwe ekwe
0 ruo +50 V DC (oke voltage nke enwere ike itinye n'ofe ntinye ntinye na-enweghị
mmebi)
Ogologo eriri na ịdị arọ: 70 cm (2.30 ft.), akụkụ mmepụta: 1.5 m (4.92 ft.), 170 g (6.0 oz.)
Nnwale dị iche iche P9000
(ikwenye nke ọma maka afọ 1)
P9000-01: maka mmepụta nleba anya nke waveform, njirimara ugboro: DC ruo 100
kHz, -3 dB
Ụdị nha
P9000-02: na-agbanwe n'etiti mmepụta ihe nleba anya waveform na mmepụta uru AC bara uru
Njirimara ugboro ugboro nke ebili mmiri: DC ruo 100 kHz, -3 dB, ugboro ụdị RMS
Njirimara: 30 Hz ruo 10 kHz, oge nzaghachi: bilie 300 ms, ọdịda 600 ms
Oke nkewa
Na-agbanwe n'etiti 1000:1 na 100:1
Ihe nrụpụta DC ± 0.5% fs (fs = 1.0 V, oke nkewa 1000: 1), (fs = 3.5 V, oke nkewa 100: 1)
Ọnụ ahịa bara uru - ± 1% fs (30 Hz ruo ihe na-erughị 1 kHz, ebili mmiri sine), ± 3% fs (1 kHz ruo 10 kHz, ebili mmiri na-ejide n'aka ziri ezi)
Ntinye ntinye/ike HL: 10.5 M, 5 pF ma ọ bụ ihe na-erughị (na 100 kHz) Volume kacha elutag1000 V AC, DC
Oke ruru oke voltage n'ala
1000V AC, DC (CAT III)
Oke okpomọkụ na-arụ ọrụ
-40°C ruo 80°C (-40°F ruo 176°F)
Ịnye ọkụ
(1) AC nkwụnye Z1008 (100 ka 240 V AC, 50/60 Hz), 6 VA (gụnyere AC nkwụnye), 0.9 VA (isi unit naanị) (2) USB ụgbọ ala ike (5 V DC, USB-microB ọnụ) , 0.8 VA (3) Isi iyi ike mpụga 2.7 V ruo 15 V DC, 1 VA
Ngwa ngwa
Akwụkwọ ntuziaka × 1, mkpirisi mkpịrịsị 2, na-ebu akpa × 1
Enweghị kọntaktị nwere ike SENSOR SP7001, SP7002
Ụzọ nchọpụta
Nchọpụta mgbaama jikọtara ọnụ nwere ikike enweghị njikọ waya efu
Igwe a na-achọpụta
eriri AVS/AVSS na-akwado, dayameta mpụga: 1.2 mm (0.05 in) ruo 2.0 mm (0.08 in)
Ọnụọgụ nke ọwa 1 CH (SP7150), 2 CH (SP7100)
Dakọtara commu- SP7001: CAN, CAN FD 125 kbit/s ka 3 Mbit / s nications ọsọ SP7002: Nwere ike 125 kbit/s ka 1 Mbit/s
ngụkọta oge igbu oge
130 ns (nke a na-ahụkarị)
CAN njedebe nkwụsị 60 (nke a na-ahụkarị), arụnyere n'ime ya
Njikọ mmepụta mgbaàmà D-sub 9-pin nwanyị
Ngwa agụnyere (SP7150)
Akwụkwọ ntuziaka mmalite ngwa ngwa ×1, kpachara anya na-arụ ọrụ ×1, spral tube (maka idozi
eriri ọkụ) ×1, eriri USB L9510 ×1, eriri njikọ ala ×1, mkpirisi mgbanaka ×1
* Anaghị akwado CAN FD mgbe ị na-eji MR8875 na MR8904.
Nyochaa data na kọmputa
Nhazi ebili mmiri 9335 (nhọrọ)
· Ngosipụta na mgbako waveform
· Ọrụ bipụta
Ifufe Viewer (Wv) Ngwanrọ (ngwanrọ ejikọtara)
· Nkwenye ụdị ebili mmiri nke ọnụọgụ abụọ na kọmpụta · Chekwa data n'ụdị CSV maka ibufe gaa na mpempe akwụkwọ.
ngwanrọ
n 9335 nkọwapụta nkọwapụta (nhọrọ)
Mpaghara arụ ọrụ Windows 10/8/7 (32/64-bit)
Ọrụ
· Ngosipụta: ihe ngosi ebili mmiri, ihe ngosi XY, ọrụ cursor, wdg. File ntinye: Ụdị data enwere ike ịgụ (.MEM, .REC, .RMS, .POW) Enwere ike ịgụcha ya file: kacha file nke enwere ike ịzọpụta site na nkwado
ngwa (kwadoro file nha nwere ike ịbụ oke n'ihi kọmpụta
gburugburu ebe ọrụ.) · Ntugharị data: ntụgharị na usoro CSV, ntụgharị ogbe nke otutu files
· Ọrụ mbipụta: ịchekwa onyonyo mbipụta files (na nkwado maka emelitere
Bipụta
metafile Ọkpụkpọ [EMF]) · Usoro mbipụta: họrọ site na enweghị tiling, taịlị 2 ruo 16, ahịrị 2 ruo 16, X/Y 1 ruo
4 taịlị, tupuview & nke mbipụta
n ife Viewer (Wv) nkọwapụta nkọwapụta (software jikọtara) gburugburu ebe ọrụ Windows 10/8/7 (32/64-bit)
Ọrụ
· Ngosipụta dị mfe nke ụdị ebili mmiri file
Tụgharịa ọnụọgụ abụọ file na usoro ederede, CSV · Pịgharịa ngosi, gbasaa/belata, wulie elu na cursor/kpalite ọnọdụ, wdg.
Ntinye modul
eriri ntinye (A)
eriri ntinye (B)
MR8875 Nhọrọ na nkọwa
* Wụnye site na itinye n'ime ngalaba isi. Onye ọrụ nwere ike dochie ya. Eweteghị eriri ntinye.
Analog Unit MR8901
4ch, voltage nha, DC ka 100 kHz bandwit
VOLTAGE/TEMP UNIT MR8902
15ch, voltage nha, nha thermocouple
STRAIN UNIT MR8903
4ch, voltage nha, ntinye ihe ngbanwe ihe nlegharị anya, eriri ntụgharị gụnyere
Nwere ike UNIT MR8904
Ihe ruru ọwa analọgụ 15 nke ọ bụla dabara na mgbama analọgụ 16-bit, yana ihe ruru ọwa mgbagha iri na isii nke ọ bụla dabara na mgbama mgbagha 16-bit * CAN FD akwadoghị.
Analog Unit MR8905
Ọwa 2, elu-voltage ntinye DC/RMS, DC ruo 100 kHz band
* Voltage na-ejedebe na nkọwapụta nke modul ntinye a na-eji
Akwadoro
ALLIGATOR CLIP L9790-01
Ọkpụkpọ uhie/oji na-ejikọta na nsọtụ eriri L9790
Ụdọ njikọ L9790
4.1 mm na-agbanwe agbanwe (0.16 in.) dia dị mkpa., USB na-enye ohere ruo 600
Ntinye V. Ogologo 1.8m (5.91 ft.)
* A na-ere obere mkpachị ngwụcha iche iche.
Kpọtụrụ PIN 9790-03
Ọkpụkpọ uhie/oji na-ejikọta na nsọtụ eriri L9790
GRABBER CLIP 9790-02
Ọkpụkpọ uhie/oji na-ejikọta na nsọtụ eriri L9790 * Mgbe agbakwunyere obere vidiyo a na njedebe nke L9790, ntinye ejedebere na CAT II 300 V. Uhie/oji set.
L9790
L9790-01
9790-03
9790-02
* Voltage na-ejedebe na nkọwapụta nke modul ntinye a na-eji
Ụdọ njikọ L9198 Ụdọ njikọ L9197
5.0 mm (0.20 in.) dia., USB ekwe 5.0 mm (0.20 in) dia., USB na-enye ohere maka
maka ntinye aka ruru 300V. 1.7m (5.58 ft.) ruo ntinye 600 V, 1.8 m (5.91 ft) ogologo,
ogologo, obere mkpirisi mkpirisi
A na-ejikọta nnukwu mkpachị ihe mkpofu nke enwere ike ihichapụ
* Voltagntinye e site na ọdụ banana nwere oke voltage nkọwapụta nke otu ntinye ntinye.
CABLE SET L4940 banana plọg, 1.5 m (4.92 ft.) ogologo, uhie/oji, 1 nke ọ bụla
CABLE L4931 Na-agbatị ogologo eriri ahụ na plọg banana, 1.5 m (4.92 ft.) ogologo
ALLIGATOR CLIP
L4935 na-agbakwunyere n'ọnụ ọnụ eriri eriri banana, CAT IV 600 V, CAT III 1000 V.
Mpempe mpe mpe mpe akwa ụgbọ ala
L4936 na-agbakwunyere n'ọnụ ọnụ eriri plọg banana, CAT III 600 V
MAGNETIC
ADAPTER L4937 na-agbakwunyere n'ọnụ ọnụ eriri plọg banana, CAT III 1000 V.
GRABBER CLIP L9243 Na-ejikọta n'ọnụ ọnụ eriri njikọ, 185 mm (7.28 in.) ogologo, CAT II 1000 V
* Voltage to ground dị n'ime nkọwapụta ngwaahịa a. Achọkwara isi iyi ike dị iche.
Nnwale dị iche iche nyocha AC ADAPTER
P9000-01
P9000-02
Z1008
Naanị ebili mmiri, ruo 1 kV AC / Waveform / RMS ngbanwe uru - 100 V AC ruo 240 V
DC, band obosara ruo 100 kHz nwere ike, ruo 1 kV AC/DC, band AC
obosara ruo 100 kHz
Enweghị kọntaktị nwere ike SENSOR SP7001-95
Sensọ nke nwere ike nyochaa CAN n'elu eriri * CAN FD adịghị akwado mgbe ị na-eji MR8875 na MR8904.
Enwere ike ịkpọ 9713-01
Maka MR8904 (MR8875), 8910, anaghị arụ ọrụ n'otu akụkụ, ogologo 1.8 m (5.91 ft.)
Ụdọ njikọ L9217
Cord ejirila njikọ BNC kpuchie ya na nsọtụ abụọ ahụ, ogologo 1.6 m (5.25 ft.)
Ngbanwe Ngbanwe 9199
Ịnata banana akụkụ, ọnụ ọnụ BNC mmepụta
Ikpe
Ịnye ọkụ
eriri ntinye (E)
PC software
Mgbasa ozi nchekwa
Nleta mgbama mgbaama
*Achọrọ inye ọkụ dị iche iche (CT9555) iji jiri ihe mmetụta dị ugbu a dị oke elu. * Naanị sensọ nwere ọnụ ME15W (12-pin) nwere ike jikọọ na CT9555. * A chọrọ CT9900 USB Conversion Cable dị iche iche iji jiri ihe mmetụta nwere ọdụ PL23 (10-pin).
IKE maka ihe mmetụta ugbu a SENSOR UNIT CT9555 1ch, nwere mmepụta ụdị ifegharị.
Ụdọ njikọ L9217 eriri ejirila njikọ BNC mkpuchi na nsọtụ abụọ ahụ, ogologo 1.6 m (5.25 ft.)
PL23 (10-pin) ka ME15W (12-pin) ntụgharị ntụgharị COVERSION CABLE CT9900
Na-atụgharị ọnụ PL23 (10-pin) ka ọ bụrụ ME15W (12-pin) ọnụ.
Ụdị: MEMORY HiCORDER MR8875
Nọmba nlereanya (koodu ịtụ)
MR8875
(Max. 16 ruo 60ch, 32 MWord memory, isi otu naanị)
* Enweghị ike ịrụ ọrụ naanị gị, ị ga-etinyerịrị nhọrọ ndị ọzọ
* Naanị ụdị ọdụ ụgbọ ala ka enwere ike iji.
Amụma ezi uche dị na ya 9320-01
Ụdị ọwa 4, maka voltage/kọntaktsị mgbama mgbanyụ ma ọ bụ gbanyụọ (nzaghachi pulse obosara 500 ns ma ọ bụ karịa, minia-
ture terminal ụdị)
Nchọpụta ezi uche dị na ya MR9321-01
Ọwa 4 dịpụrụ adịpụ, nchọpụta ngbanwu/ gbanyụọ AC/DC voltage (obere ọnụ ụdị)
Kaadị ebe nchekwa SD 2GB Z4001
2 GB ikike
Kaadị ebe nchekwa SD Z4003
8 GB ikike
Jiri naanị kaadị CF ma ọ bụ draịva USB nke HIOKI rere. Ekwenyeghị ndakọrịta na arụmọrụ maka kaadị CF ma ọ bụ mkpanaka USB nke ndị nrụpụta ndị ọzọ mere. Ị nwere ike ị gaghị enwe ike ịgụ ma ọ bụ chekwaa data na nke ahụ
kaadị.
USB draịva Z4006
16 GB, ogologo ndụ, nchekwa nchekwa SLC nwere ntụkwasị obi dị elu
Onye nrụpụta ebili mmiri 9335
Tụgharịa data, bipụta ma gosipụta ụdị ebili mmiri
LAN CABLE 9642
eriri Ethernet kwụ ọtọ, ewepụtara ya na eriri ntụgharị gafere ogologo, ogologo 5 m (16.41 ft.)
FlexPro (ngwa ngwa ndị ọzọ)
Akụrụngwa dị elu maka nyocha na ngosipụta nke data HiCorder Memory HiCorder ozi ndị ọzọ: Weisang GmbH (Germany) http://www.weisang.com/
* Voltage to ground dị n'ime nkọwapụta ngwaahịa a. Achọkwara isi iyi ike dị iche.
Nnwale dị iche iche 9322
Maka ihe ruru 1 kV AC ma ọ bụ 2 kV DC, obosara nke bandwit ruo 10 MHz
AC ADAPTER 9418-15
100V AC ruo 240V AC.
*Z1002 bụ ngwa ejikọtara
Ruo 1000 A (nkenke dị elu) * ME15W (12-pin) ụdị njedebe
Mwepụta nke ọma dị elu site na ihe mmetụta dị ugbu a, lelee ụdị ebili mmiri sitere na DC gaa na AC agbagọ
Ihe mmetụta AC/DC ugbu a CT6862-05, 1 MHz, 50 A AC/DC ihe mmetụta ugbu a CT6863-05, 500 kHz, 200 A.
Mwepụta nke ọma dị elu site na ihe mmetụta dị ugbu a, lelee ụdị ebili mmiri sitere na DC gaa na AC agbagọ
AC/DC ihe mmetụta ugbu a CT6872, 10 MHz, 50 A AC/DC ihe mmetụta ugbu a CT6873, 10 MHz, 200 A
Mwepụta nke ọma dị elu site na ihe mmetụta dị ugbu a, lelee ụdị ebili mmiri sitere na DC gaa na AC agbagọ
AC/DC ihe mmetụta ugbu a CT6904A, 4 MHz, 500 A
Mwepụta nke ọma dị elu site na ihe mmetụta dị ugbu a, lelee ụdị ebili mmiri sitere na DC gaa na AC agbagọ
AC/DC ihe mmetụta ugbu a CT6875A, 2 MHz, 500 A AC/DC ihe mmetụta ugbu a CT6876A, 1.5 MHz, 1000 A
Leba anya n'ụdị ebili mmiri sitere na DC gaa na AC AC/DC gbagọrọ agbagọ CT6841A, 2 MHz, 20 A AC/DC ugbu a PROBE CT6843A, 700 kHz, 200 A.
Lelee ụdị ebili mmiri AC (enweghị ike ịhụ DC) CLAMP NA SENSOR 9272-05, 100 kHz, 200 A
Leba anya n'ụdị ebili mmiri sitere na DC gaa na AC AC / DC agbagọ agbagọ CT6844A, 500 kHz, 500 A AC/DC CURRENT PROBE CT6845A, 200 kHz, 500 A AC/DC CURRENT PROBE CT6846A, 100kHz
Akpachara anya mgbe ị na-ejikọta ihe mmetụta dị ugbu a dị elu na ebe nchekwa HiCorder Na-ejikọta na MR8875 · Igwe ọkụ dị ugbu a dị elu (ME15W) + CT9555 + BNC cable MR8875
Ụdị ihe mmetụta ndị ọzọ dị ugbu a
Enwere ike iji MR8875 jiri ụdị sensọ na nyocha dị ugbu a. Maka nkọwa, hụ ozi ngwaahịa na Hioki's websaịtị.
Achọrọ CM7290 (dị iche) iji jiri ihe mmetụta dị ugbu a.
100 A ruo 2000 A (ọsọ ọsọ) AC/DC ugbu a sensọ CT7631
DC, 1 Hz ruo 10 kHz, 100 A
AC/DC AUTO ZERO ugbu a sensọ CT7731
DC, 1 Hz ruo 5 kHz, 100 A
AC/DC ihe mmetụta ugbu a CT7636
DC, 1 Hz ruo 10 kHz, 600 A
AC/DC AUTO ZERO ugbu a sensọ CT7736
DC, 1 Hz ruo 5 kHz, 600 A
AC/DC ihe mmetụta ugbu a CT7642
DC, 1 Hz ruo 10 kHz, 2,000 A
AC/DC AUTO ZERO ugbu a sensọ CT7742
DC, 1 Hz ruo 5 kHz, 2,000 A
Ihe ngosi UNIT CM7290
Na-enye nha, ngosi, na ọrụ mmepụta mgbe ejiri ya na CT7000s.
Ihe ngosi UNIT CM7291
jiri teknụzụ ikuku Bluetooth® arụnyere n'ime ya
Ụdọ Mpụta L9095
Jikọọ na ọnụ ọnụ BNC, 1.5 m (4.92 ft.) ogologo
AC ADAPTER Z1002
Maka isi otu, 100V AC ruo 240V AC
Ngwugwu batrị Z1003
NiMH, na-akwụ ụgwọ ka etinyere na ngalaba isi
NA-ebu ikpe C1004
Gụnyere akụkụ maka nhọrọ, ụdị ogwe siri ike, dịkwa mma maka ibu MR8875
* Maka nkọwa naanị. Biko zụta na mpaghara.
Thermocouple
500 A ruo 5000 A * Maka ahịrị ike azụmahịa, 50/60 Hz
CLAMP NA nyocha 9018-50
Njirimara nke ọma, njirimara ugboro: 40 Hz ruo 3 kHz, 10 ruo 500 A AC nso, mmepụta 0.2 V AC fs
CLAMP NA nyocha 9132-50
Njirimara ugboro ugboro: 40 Hz ka 1 kHz, 20 ruo 1000 A AC nso, mmepụta 0.2 V AC fs
Ihe mmetụta AC na-agbanwe agbanwe CT9667-01/-02/-03
10 Hz ruo 20 kHz, 5000/500 A AC, 500 mV/fs mmepụta, 100 ruo 254 mm (3.94 ruo 10.00 in.), 3 loop diameters
Leak dị ugbu a * Maka ahịrị ike azụmahịa, 50/60 Hz AC LEAKAGE CLAMP METER CM4003
6 mA nso (1 A mkpebi) ruo 200 A nso, na WAVE/RMS mmepụta, Njikọ Cable L9097 gụnyere
AC ADAPTER Z1013
100V AC ruo 240V AC
Ihe mmetụta okpomọkụ
Mara: Aha ụlọ ọrụ na aha ngwaahịa pụtara na broshuọ a bụ ụghalaahịa ma ọ bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke ụlọ ọrụ dị iche iche.
EKEsara ya
eriri ntinye (C)
eriri ntinye (D)
Nhọrọ ndị ọzọ maka ntinye
Isi ụlọ 81 Koizumi, Ueda, Nagano 386-1192 Japan https://www.hioki.com/
Ozi niile ziri ezi dịka nke Maachị 18, 2024. Ọdịnaya ga-agbanwe n'enweghị ọkwa.
MR8875E19-43M
Akwụkwọ / akụrụngwa
 |
HIOKI MR8875 ebe nchekwa HiCORDER 1000V ntinye ntinye otutu ọwa ozi [pdf] Akwụkwọ ntuziaka onye ọrụ MR8875, MR8875 ebe nchekwa HiCORDER 1000V Direct Input Multi Channel Logger, MR8875 Memory HiCORDER, Memory HiCORDER, HiCORDER, MR8875 HiCORDER, Ebe nchekwa HiCORDER 1000V Direct Input Multi Channel Logger, 1000V Direct Input Multi Channel Logger, 1000V Direct Input MultiXNUMX Channel, Multi Channel Logger |
