Godox XProf TTl Wireless Flash Trigger

Ketapele

• Kea leboha ha u rekile mochini ona oa XProF wireless flash.
• Nash trigger ena e se nang mohala e loketse ho sebelisa FUJIFILM lik'hamera tsa taolo ea 10 Godox e benya ka X system mohlala, flash ea khamera, flash ea kantle le flash ea studio.
• E fana ka li-mufti-channel triggering, phetisetso ea mats'oao e tsitsitseng, le karabelo e hlokolosi, e fa batho ba nkang lifoto monyetla oa ho feto-fetoha le maemo le taolo holim'a litlhophiso tsa bona tsa strobist.
• The flash trigger e sebetsa ho hotshoe-mounted FUJIFILM series cameras, hammoho le lik'hamera tse nang le li-sockets tsa PC sync.
• Ka XProF wireless flash trigger, khokahano ea lebelo le phahameng e fumaneha bakeng sa boholo ba li-flash tsa khamera 'marakeng tse tšehetsang TTL.
• Lebelo le phahameng la ho hokahanya ha Flash le fihla ho 1/8000s 1/8000s le ka fihlelleha ha khamera e na le lebelo le phahameng la shutter la 1/80005.

Phatlalatso ea ho lumellana

• GODOX Photo Equipment Co., Ltd. e phatlalatsa hore sesebelisoa sena se lumellana le litlhoko tsa bohlokoa le lipehelo tse ling tse amehang tsa Directive 2014/53/EU. Ka Article 1 0(2) le Article 10(1 0), sehlahisoa sena se lumelletsoe ho sebelisoa linaheng tsohle tseo e leng litho tsa EU-
• Bakeng sa tlhaiso-leseling e batsi ka DOC, ka kopo tlanya sena web sehokelo: https://www.godox.com/DOC/Godox_XPro_Series_DOC.pdf
• Sesebelisoa se lumellana le litlhaloso tsa RF ha sesebelisoa se sebelisoa ho Omm ho tsoa 'meleng oa hau.

Tlhokomediso

• Nako ea ho sebetsa: 2412. "MHz
• Boholo ba Matla a EIRP: EA-2.3dBm
• 2464.49MHz

Tlhokomediso

• U se ke ua qhaqha. Ha ho ka ba le tokiso, sehlahisoa sena se tlameha ho romelloa setsing se lumelletsoeng sa tlhokomelo.
• Kamehla boloka sehlahisoa sena se omme. Se sebelise pula kapa ka damp maemo.
• Boloka Hoseng Hoa bana.
• U se ke ua sebelisa mochine oa flash moo ho nang le khase e tukang. Maemong a mang, ka kopo ela hloko litemoso tse amehang.
• Se ke oa siea kapa ua boloka sehlahisoa haeba mocheso oa tikoloho o feta 50t.
• Koala flash trigger hang-hang ha ho ka etsahala hore u se sebetse hantle. Ela hloko litemoso ha u tšoara libeteri
  • Sebelisa libeteri tse thathamisitsoeng bukeng ena feela. Se ke oa sebelisa libeteri tsa khale le tse ncha kapa libeteri tsa mefuta e fapaneng ka nako e le 'ngoe.
  • Bala le ho latela litemoso le litaelo tsohle tse fanoeng ke moetsi.
  • Libetri ha li khone ho khutsufatsoa kapa ho qhaqhoa.
  • U SE KE UA kenya libeteri mollong kapa ua li sebelisa mocheso o tobileng.
  • Se ke oa leka ho kenya libeteri holimo kapa morao.
  • Libetri li na le monyetla oa ho lutla ha li felletse ka ho feletseng. Ho qoba tšenyo ea sehlahisoa, etsa bonnete ba hore u tlosa libeteri ha sehlahisoa se sa sebelisoe nako e telele kapa ha libeteri li felloa ke tefiso.
  • Haeba metsi a tsoang libetering a kopana le letlalo kapa liaparo, hlatsoa hang-hang ka metsi a hloekileng.

Mabitso a Likarolo

'Mele

Phanele ea LCD

1. Channel (32)
2. Khokahano ea Khamera
3. Moetso Lamp Taolo e Kholo
4. Khokahano ea Lesira le Lebelo le Phahameng/Ka morao
5. Molumo
6. Pontsho ya Boemo ba Battery
7. Sehlopha
8. Mokhoa
9. Matla
10. Sehlopha sa Modelling Lamp
11. Boleng ba ZOOM
12. Litšoantšo tsa Konopo ea Mosebetsi
13. Menu ea C.Fn
14. Phetolelo

Betri

Libetri tsa alkaline tsa AA lia khothaletsoa.

Ho kenya Batteries

• Joalo ka ha ho bonts'itsoe papisong, thellela sekoaelo sa karolo ea betri ea flash trigger ebe u kenya tse peli.
• Libetri tsa AA ka thoko.

Pontsho ya Boemo ba Battery

• Sheba sesupo sa boemo ba betri ho phanele ea LCD ho bona boemo ba betri bo setseng nakong ea ts'ebeliso.

Pontsho ya Boemo ba Battery	Tlhaloso
3 lihlopha	E tletse
2 lihlopha	Hare
1 keriti	Tlase
Grid e se nang letho	Betri e tlase, ka kopo e khutlise.
Ho panya	<2.5V Boemo ba betri bo ntse bo tsoela pele e tla sebelisoa hang hang (ka kopo tlosa libeteri tse ncha, kaha matla a tlase a etsa hore ho se be le flash kapa flash e haellang nyeoe ea sebaka se selelele).

Letšoao la betri le bolela feela libeteri tsa alkaline tsa AA. Joalo ka voltagE Of betri ea Ni-MH e batla e le tlase, ka kopo u se ke oa bua ka chate ena.

1. Ho sebelisa Flash Trigger
   • E le Wireless Camera Flash Trigger

Nka TT685F joalo ka exampLe:

1. Koala khamera 'me u kenye transmitter ho khamera hotshoe. Ka mor'a moo, kenya matla ho flash trigger le khamera.
2. Tobetsa nako e telele konopo ea ho seta kanale, sehlopha, mokhoa, le liparamente (e bua ka litaba tsa "Setting the Flash Trigged').
3. Bulela flash ea khamera, tobetsa konopo ea "wireless setting" le ho> aekhone ya waelese le lekhoba unit letšoao tla ba e bonts'itsoeng ho phanele ea LCD. Tobetsa ea konopo ho seta kanale e tšoanang ho flash trigger, ebe o tobetsa ea konopo ho seta Sehlopha se le seng ho flash trigger
   • (Hlokomela: Ka kopo sheba bukana ea litaelo e nepahetseng ha u seta mabone a khamera a mefuta e meng).
4. Tobetsa shutter ea khamera ho qala le boemo ba lamp ea flash trigger e fetoha khubelu ka ho lumellana.

Joalo ka Wireless Outdoor Flash Trigger Nka AD600B joalo ka exampLe:

1. Koala khamera 'me u kenye transmitter ho khamera hotshoe. Ka mor'a moo, kenya matla ho flash trigger le khamera.
2. Tobetsa nako e telele konopo ea ho seta kanale, sehlopha, mokhoa, le liparamente (e bua ka litaba tsa "Setting the Flash Trigger").
3. Kenya khanya ea kantle ebe o tobetsa konopo ea "wireless setting" le ho> aekhone ya waelese e tla hlahiswa ho Phanele ea LCD. Tobetsa nako e telele konopo ho seta kanale e le 'ngoe ho flash trigger, le ho tobetsa konopo e khuts'oane ho seta sehlopha se le seng ho flash trigger.
   • (Hlokomela: ka kopo sheba bukana ea litaelo e nepahetseng ha u hlophisa mabone a kantle a mefuta e meng).
4. Tobetsa shutter ea khamera ho qala le boemo ba lamp ea flash trigger e fetoha khubelu ka ho lumellana.

Joalo ka Wireless Studio Flash Trigger Nka GS40011 joalo ka exampLe:

1. Koala khamera 'me u kenye transmitter ho khamera hotshoe. Ka mor'a moo, kenya matla ho flash trigger le khamera.
2. Tobetsa konopo nako e telele ho seta mocha, sehlopha, mokhoa le liparamente (e bua ka litaba tsa "Setting the Flash Trigger").
3. Hokela flash ea studio mohloling oa matla 'me u e bulele. Tobetsa ho theosa ka tsela e lumellanang konopo le> aekhone ya waelese e tla hlahiswa phanele ya LCD. Tobetsa nako e telele konopo ea ho beha mocha o le mong ho flash trigger, ebe o tobetsa konopo ea <GRICH> hakhutšoanyane ho beha sehlopha se le seng ho flash trigger.
   • (Hlokomela: ka kopo sheba bukana ea litaelo e nepahetseng ha u hlophisa mabone a studio a mefuta e meng).
4. Tobetsa shutter ea khamera ho qala. Boemo ba lamp ea flash ea khamera le flash trigger ka bobeli li fetoha khubelu ka ho lumellana.
   • Hlokomela: Kaha bonyane boleng ba tlhahiso ea flash ea studio ke 1/32, boleng ba tlhahiso ea flash trigger bo lokela ho hlophisoa ho feta 1/32. Kaha khanya ea studio ha e na ts'ebetso ea TTL le stroboscopic, "flash trigger" e lokela ho hlophisoa ho M mode ho qala.

Joalo ka Flash Trigger e nang le 2.5mm Sync Cord Jack Operation mokhoa:

1. Mokhoa oa ho hokahanya ka kopo o bua ka litaba tsa "Joaloka Wireless Studio Flash Trigger" le "Joaloka Sesebelisoa sa Shutter ea Wireless".
2. Beha jack ea khokahanyo ea transmitter end e le port port.
   • Ts'ebetso: tobetsa konopo e pheletsong ea transmitter ho kenya li-setting tsa C. Fn. Ebe, seta SYNC ho OUT mode.
3. Tobetsa shutter ka mokhoa o tloaelehileng 'me likhase li tla laoloa ke lets'oao la jack cord sync.

Phetoho ea Matla

• Tsamaisa Phetoho ea Matla ho ON, 'me sesebelisoa se buletsoe' me sesupo sa boemo lamp e ke ke
  • Hlokomela: Ho qoba tšebeliso ea motlakase, tima transmitter ha e sa sebelisoe.

Kena ka mokhoa o iketsang oa ho Boloka Matla

1. Sistimi e tla kenella ka bo eona mode ea standby ka mor'a ho emisa ho sebelisa transmitter bakeng sa metsotsoana e fetang 90. 'Me lipontšo tsa phanele ea LCD lia nyamela hona joale.
2. Tobetsa konopo efe kapa efe ho tsoha. Haeba mochine oa flash o khomaretsoe seeta se chesang sa k'hamera ea CANON EOS, mochine oa halofo oa shutter ea khamera o ka boela oa tsosa tsamaiso.
   • Hlokomela: Haeba u sa batle ho kenya mokhoa oa ho boloka matla, tobetsa konopo konopo ea ho kenya li-setting tsa tloaelo tsa C.Fn le ho seta ST BY ho TIMA.

Phetoho ea Matla ea AF Assist Beam

• Tsamaisa AF-assist beam switch ho ON, 'me mabone a AF a lumelloa ho hlahisa.
• Ha khamera e sa khone ho tsepamisa maikutlo, lebone la thuso la AF le tla bulela; ha khamera e khona ho tsepamisa maikutlo, lebone la thuso la AF le tla tima.

Litlhophiso tsa Channel

1. Tobetsa nako e telele konopo le boleng ba kanale bo tla khethoa.
2. Tobetsa mohala o khethiloeng ho khetha mocha o nepahetseng. Tobetsa ea konopo hape ho netefatsa tlhophiso.
3. Leqhubu lena la flash le na le likanale tse 32 tse ka fetoloang ho tloha ho 1 ho ea ho tse 32. Beha transmitter le moamoheli mocha o le mong pele o sebelisoa.

Lisebelisoa tsa ID tse se nang mohala

• Fetola liteishene tse se nang mohala le ID e se nang mohala ho qoba tšitiso hobane e ka qala feela kamora hore li-ID tsa waelese le likanale tsa master unit le yuniti ea makhoba li behoe ka mokhoa o ts'oanang.
• Tobetsa konopo ho kenya ID ea hau ea C.Fn. Tobetsa ea konopo ea ho khetha OFF katoloso ea mocha, 'me u khethe palo efe kapa efe ho tloha ho 01 ho isa ho 99.
  • Hlokomela: Ts'ebetso ena e ka sebelisoa feela ha master unit le yuniti ea makhoba ka bobeli li na le mesebetsi ea ID e se nang mohala.

Litlhophiso tsa Mokhoa

1. Tobetsa nakoana ea konopo le mokhoa oa sehlopha sa hona joale o tla fetoha.
2. Beha lihlopha ho lihlopha tse hlano (AE)
   1. Ha u hlahisa lihlopha tse ngata, tobetsa konopo ea konopo ho fetola mokhoa oa lihlopha tse ngata ho ea ho MULTI mode. Tobetsa konopo ea khetho ea sehlopha e ka seta mokhoa oa MULTI hore o BULE kapa oa tima
   2. Ha o hlahisa lihlopha tse ngata, tobetsa konopo ea khetho ea sehlopha kapa konopo ka mokhoa oa sehlopha se le seng, 'me mekhoa eohle ea sehlopha sa hona joale e tla fetoloa ka taelo ea TTL/M/„.
3. Ha u beha sehlopha ho lihlopha tse 16 (OF), ho na le mokhoa oa matsoho feela M.
4. Tobetsa nako e telele konopo bakeng sa metsotsoana ea 2 ho fihlela "LOCKED" e bontšoa ka tlase ho phanele ea LCD, ho bolelang hore skrine e notletsoe 'me ha ho na litekanyetso tse ka behoang. Tobetsa nako e telele konopo bakeng sa metsotsoana e 2 hape ho notlolla.

Mosebetsi oa ho hōlisa

• Fetolela lipakeng tsa lihlopha tse ngata le tsa sehlopha se le seng: khetha sehlopha ka mokhoa oa mufti-group ebe o tobetsa konopo konopo ho e holisa ho sehlopha se le seng. Ebe, tobetsa konopo ea konopo ho khutlela ho lihlopha tse ngata.

Litlhophiso tsa Boleng ba Output

1. Lipontšo tsa lihlopha tse ngata ka mokhoa oa M
   1. Tobetsa konopo ea sehlopha ho khetha sehlopha, tobetsa konopo e khethiloeng, 'me boleng ba tlhahiso ea matla bo tla fetoha ho tloha ho Min ho ea ho 1/1 ho 0.3 kapa 0.1 stop increments. Tobetsa ea konopo ho netefatsa tlhophiso.
   2. Tobetsa ea konopo ea ho khetha boleng ba tlhahiso ea matla a lihlopha tsohle, tobetsa mohala o khethiloeng, 'me boleng ba matla a lihlopha tsohle bo tla fetoha ho tloha ho Min ho ea ho 1/1 ho 0.3 kapa
   3. ho emisa keketso. Tobetsa ea konopo hape ho netefatsa tlhophiso.
2. Lipontšo tsa sehlopha se le seng ka mokhoa oa M
   • Fetola mohala o khethiloeng 'me boleng ba tlhahiso ea matla a sehlopha bo tla fetoha ho tloha ho Min ho ea ho 1/1 ho 0.3 kapa 0.1 stop increments.
   • Hlokomela: Min. e bua ka boleng bo tlase bo ka hlophisoang ho M kapa Multi mode. Boleng bo tlase bo ka hlophisoa ho 1/128, 1/128(0.1 1/256, kapa 1/256(0.1) ho latela C.Fn-STEP. Bakeng sa mabone a mangata a khamera, boleng bo tlase ba tlhahiso ke 1/128 kapa 1 /128(0.1) mme e ke ke ea hlophisoa ho 1/256 kapa 1/256(0.1 Leha ho le joalo, boleng bo ka fetoha ho 1/256 kapa 1/256(0.1) ha bo sebelisoa hammoho le mahlaseli a matla a Godox mohlala AD600Pro, joalo-joalo.

Litlhophiso tsa Matšeliso a Tšusumetso ea Flash

1. Lipontšo tsa lihlopha tse ngata ka mokhoa oa TTL
   1. Tobetsa konopo ea sehlopha ho khetha sehlopha, tobetsa khetho ea ho daela, 'me boleng ba FEC bo tla fetoha ho tloha ho -3 ho ea ho -3 ho 0.3 stop increments. Tobetsa ea konopo ho netefatsa tlhophiso.
   2. Tobetsa ea konopo ea ho khetha lihlopha tsohle tsa boleng ba FEC, tobetsa ho daela, 'me lihlopha tsohle tsa FEC li tla fetoha ho tloha ho -3 ho ea ho -3 ho 0.3 stop increments. Tobetsa konopo hape ho netefatsa tlhophiso.
2. Lipontšo tsa sehlopha se le seng ka mokhoa oa TTL
   1. Fetola mohala o khethiloeng 'me matla a tsoang ho sehlopha a tla fetoha ho tloha ho -3 ho ea ho -3 ho 0.3 stop increments.

Multi Flash Settings (Boleng ba Output, Times, and Frequency)

1. Ka har'a li-flash tse ngata (litšoantšo tsa TTL le M ha li hlahisoe).
2. Methalo e meraro e bonts'oa ka thoko e le boleng ba tlhahiso ea matla, Tlmes(linako tsa ho bonesa), le Hz (maqhubu a khanya).
3. Fetolela ho Khetha Dial ho fetola boleng ba tlhahiso ea matla ho tloha ho Min. ho isa ho 1/4 ho palo e felletseng ea libaka tsa ho emisa.
4. Tobetsa e khuts'oane ea konopo ea Times e ka fetola linako tsa flash.
5. Tobetsa ho daela ho khetha ho fetola boleng ba litlhophiso.
6. Tobetsa e khuts'oane ea konopo ea Hz e ka fetola maqhubu a khanya.
7. Tobetsa ho daela ho khetha ho fetola boleng ba litlhophiso.
8. Ho fihlela lichelete tsohle li behiloe. Kapa nakong ea tlhophiso efe kapa efe ea boleng, tobetsa konopo ho tsoa boemong ba ho seta. Ha ho boleng bo tla panya.
9. Ka har'a li-setting tsa li-multi-flash, tobetsa konopo ea konopo ea ho khutlela ho menu e kholo ha ho se boleng bo panyang.
   • Hlokomela: Kaha linako tsa flash li thibetsoe ke boleng ba tlhahiso ea flash le frequency ea flash, linako tsa flash ha li khone ho feta boleng bo kaholimo bo lumelletsoeng ke sistimi. Linako tse fetisetsoang sebakeng sa moamoheli ke nako ea sebele ea ho benya, e amanang le tlhophiso ea shutter ea khamera.

Moetso Lamp Litlhophiso

1. Ha u hlahisa lihlopha tse ngata, tobetsa konopo ea konopo ho laola ON/OFF ea modelling lamp. Tobetsa konopo ea sehlopha ho khetha sehlopha ha u hlahisa lihlopha tse ngata kapa ha u hlahisa sehlopha se le seng, tobetsa konopo konopo ho laola ON/OFF ea modelling lamp (Hlokomela: Mehlala e ka sebelisang sehlopha se le seng ho BUA/TLOA mohlala lamp ke tse latelang: GSII, SKII, QSII, QDII, DE”, letoto la DPII, joalo-joalo.
2. Flash ea kantle AD200 le AD600 e ka sebelisa ts'ebetso ena kamora ho ntlafatsa. Ba fihlileng ba bacha ka ho etsa mohlala lamps e ka sebelisa ts'ebetso ena.).

Litlhophiso tsa Boleng ba ZOOM

• Tobetsa konopo e khuts'oane 'me boleng ba ZOOM bo tla hlahisoa phanele ea LCD. Khetha sehlopha 'me u fetole mohala o khethiloeng,' me boleng ba ZOOM bo tla fetoha ho tloha ho
• AU T 0/24 ho isa ho 200. Khetha boleng bo lakatsehang 'me u tobetse konopo hape ho khutlela ho menu e kholo.
  • Hlokomela: ZOOM ea flash e lokela ho hlophisoa ho Auto (A) mode pele e araba.

Litlhophiso tsa Shutter Sync

• Khokahano ea lebelo le holimo: ho beha SYNC sebakeng sa ts'ebetso ea flash ho FP ho khamera ea FUJIFILM pontiff e hlahisoa phanele ea LCD ea flash trigger. Ebe, ke beha shutter ea khamera.
• Khokahano ea likharetene tsa bobeli: ho beha SYNC maemong a ts'ebetso ea flash ho REAR ho kh'amera ea FUJIFILM ho fihlela» e hlahisoa phanele ea LCD ea flash trigger. Ebe, ke beha shutter ea khamera.

Litlhophiso tsa Buzz

• Tobetsa ea konopo ho kenya C.Fn BEEP ebe o tobetsa konopo. Kgetha HO BUA ho bulela BEEP ha o ntse o TUMILE ho e tima. Tobetsa ea konopo hape ho khutlela ho menu e kholo.

Sync Socket Settings

1. Tobetsa konopo ho kenya C.Fn SYNC ebe o tobetsa konopo ea konopo ho khetha IN kapa OUT. Tobetsa ea konopo hape ho khutlela ho menu e kholo.
   1. Ha u khetha IN, sokete ena ea sync e tla nolofalletsa XProF ho qala flash.
   2. Ha u khetha OUT, sokete ena ea sync e tla romella matšoao a ho qala ho etsa hore ho be le taolo e 'ngoe e hole le flash.

Mosebetsi oa TCM

T CM transform function ke mosebetsi o itseng oa Godox: TTL flash value e fetoha boleng ba tlhahiso ea matla ka mokhoa oa M.

1. Beha leqhubu la flash ho mode ea TTL ebe u e hokela khamera. Tobetsa shutter bakeng sa ho thunya.
2. Tobetsa nako e telele konopo, 'me boleng ba flash ka mokhoa oa TTL bo tla fetoloa boleng ba tlhahiso ea matla ka mokhoa oa M (Boleng ba bonyane bo bontšitsoeng ke boleng ba Min. e behiloeng).
3. Ka kopo, sheba lits'ebetso tsa tloaelo tsa C.Fn ho bona mefuta ea flash e tsamaellanang le mesebetsi ea TCM.
   • Hlokomela: Ka kopo, khetha mefuta e loketseng ts'ebetsong ea TCM ho li-setting tsa tloaelo tsa C.Fn ho latela flash ea hau.

Litlhophiso tsa Mosebetsi oa SHOOT

Tobetsa konopo ho kenya C.Fn SHOOT. Tobetsa ea konopo ho khetha letlobo le le leng kapa letlobo le le leng, ebe o tobetsa konopo hape ho khutlela ho menu e kholo.

• Lehloho le le leng: Ha u thunya, khetha letlobo le le leng. Ka mekhoa ea M le ea Multi, master unit e romella feela matšoao a susumetsang ho sehlopha sa makhoba, se loketseng ho nka lifoto tsa motho a le mong bakeng sa advan.tage ea ho boloka matla.
• Mufti-shoots: Ha u thunya, khetha lithunya tse ngata, 'me master unit e tla romela litekanyo le matšoao a qalang ho sehlopha sa makhoba, se loketseng ho nka lifoto tsa batho ba bangata. Leha ho le joalo, ts'ebetso ena e ja matla kapele.
• APP: Romela feela lets'oao la ho qala ha kh'amera e thunya (laola liparamente tsa lebone ka smartphone APP).

Ho theha Flash Trigger

• C.Fn: Ho beha Mesebetsi e Tloaelehileng

Tafole e latelang e thathamisa mesebetsi e fumanehang le e sa fumaneheng ea flash ena.

Mosebetsi o Tloaelehileng	Mosebetsi	Ho beha Matšoao	Litlhophiso le Tlhaloso
KHAULE	Robala	ON	ON
		TLOA	TLOA
BEEP	Beeper	ON	ON
		TLOA	TLOA
MOHATO	Boleng ba tlhahiso ea matla	1/128	Tlhahiso e fokolang ke 1/128 (fetola mohatong oa 0.3)
		1/256	Tlhahiso e fokolang ke 1/256 (fetola mohatong oa 0.3)
		1/128 (0.1)	Tlhahiso e fokolang ke 1/128 (fetola mohatong oa 0.1)
		1/256 (0.1)	Tlhahiso e fokolang ke 1/256 (fetola mohatong oa 0.1)
KHANYA	Nako ea backlighting	12sec	E tima ka metsotsoana e 12
		TLOA	E tima kamehla
		ON	E khantša kamehla
SYNC	Khokahanya thapo jack	IN	Numella XProF ho qala flash
		TSOA	Romella lets'oao la ho qala ho kenya taolo e 'ngoe ea remote le flash
SEHLOPHA	Sehlopha	5(AE)	Lihlopha tse 5 (AE)
		16(0-F)	Lihlopha tse 16 (0-F); Lihlopha tse 16 ha moamoheli a qetella ke studio flash, e ka hlophisoang feela ho M mode sebakeng sena
LCD	Phapang pakeng tsa LCD panel	-3- + 3	Karolelano ea phapang e ka hlophisoa joalo ka nomoro ea bohlokoa ho tloha ho -3 ho ea ho +3

Mefuta e Tšoanang ea Flash

Phetiso	Moamoheli	Khanya	Hlokomela
XProF		AD600 series/AD360I I series/AD200 AD400ProN860II seriesN850II TT685 series/TT600/TT350C Quickerll series/QTII/SK II series DP II letoto/GSII
	XTR-16	AD360/AR400	E benya ka boema-kepe ba USB ba waelese ba Godox
		Letoto la kapele/letoto la SK/letoto la DP/ GT/GS series/Smart flash series	E ka qala feela
	XTR-16S	V860 (e ka sebelisoa feela ka lebelo le tlase mokhoeng oa M.) V850

Hlokomela: Mefuta e mengata ea ts'ehetso: mesebetsi eo ka bobeli e leng ea XProF le flash.

Kamano ea sistimi e se nang mohala ea XT le sistimi ea waelese ea Xl:

Mehlala ea Khamera e Tšoanang

Lik'hamera tsa FUJIFILM li arotsoe ka mefuta e meraro ho latela mekhoa ea bona ea ho laola ho khanya ha khamera:

A	GFX50S, X-Pro2, X-T20, X-T2, X-T1
B	X-Pro1 , X-T10, X-E1 , X-A3
C	X100F, X100T

Meetso ea khamera e tsamaellanang le ts'ehetso ea tšebetso:

• XIOOT ha e na tšebetso ea sync ea lesira la bobeli (REAR).
• Leseli la AF-assist le tla khantša ha shutter e le lebelo le tlaase (<200).
• Tafole ena e thathamisa feela mefuta ea likhamera tse lekiloeng, eseng likhamera tsohle tsa FUJIFILM.
• Bakeng sa ho tsamaellana le mefuta e meng ea khamera, ho khothaletsoa ho itlhahloba.
• Litokelo tsa ho fetola tafole ena li bolokiloe.

Lintlha tsa Tekheniki

Mohlala	XProF
Lik'hamera tse lumellanang	FUJIFILM lik'hamera (autoflash) Ts'ehetso bakeng sa lik'hamera tse nang le socket ea sync ea PC
Phepelo ea motlakase	2 * AA libetri
Taolo ea Flash Exposure
TTL e khantša ka bohona	Ee
Manual flash	Ee
Stroboscopic flash	Ee
Mosebetsi
Khokahano ea lebelo le holimo	Ee
Khokahano ea lesira la bobeli	Ee
Ho pepeseha ha Flash matšeliso	E, ± 3 e ema ka 1/3 stop increments
Senotlolo sa khanya ea khanya	Ee
Thusa ea ho tsepamisa maikutlo	Ee
Ho etsisa lamp	Laola mohlala lamp ka flash trigger
Beeper	Laola beeper ka flash trigger
Wireless setting	Qetello ea moamoheli e ka laola ho thunya ha khamera ka ho 2.5mm thapo jack sync
Boemo ba ZOOM	Fetola boleng ba ZOOM ka transmitter
Mosebetsi oa TCM	Fetolela boleng ba ho thunya ba TTL ho boleng ba tlhahiso ho node ea M
Ntlafatso ea firmware	Ntlafatsa ka boema-kepe ba USB ba Type•C
Mosebetsi oa memori	Litlhophiso li tla bolokoa metsotsoana e 2 kamora ts'ebetso ea ho qetela ebe li hlaphoheloa kamora ho qala bocha

Mohlala	XProF
Flash e se nang mohala
Sebaka sa phetisetso (hoo e ka bang.)	0-100m
Waelese e hahiloeng kahare	2.4G
Mokhoa oa ho feto-fetoha	MSK
Channel	32
ID e se nang mohala	01-99
Sehlopha	16
Tse ding
Pontšo	Phanele e kholo ea LCD, e khantšang ka morao ON kapa HO TLOA
Boemo/ Boima ba mmele	90x58x50mm/80g
2.4G Wireless Frequency Range	2413.0MHz-2465.0MHz
Max. Matla a ho fetisa a 2.4G Wireless	5dbm

Khutlisa Litlhophiso tsa Feme

• Tobetsa ka mokhoa o ts'oanang konopo ea ts'ebetso e 'meli bohareng,' me litlhophiso tsa fektheri tsa ho tsosolosa li felile ho fihlela "RESET" e hlahisoa phanele ea LCD.

Ntlafatso ea Firmware

• Sesebelisoa sena sa flash trigger se tšehetsa ntlafatso ea firmware ka boema-kepe ba Type-CUSB. Lintlha tsa ntlafatso li tla hlahisoa ho rona semmuso websebaka.
• Mohala oa khokahanyo ea USB ha oa kenyelletsoa sehlahisoa sena. Kaha boema-kepe ba USB ke mofuta oa C USB sokete, ka kopo sebelisa mohala oa khokahano oa USB Type-C.
• Ha ntlafatso ea firmware e hloka tšehetso ea software ea Godox G2, ka kopo, khoasolla le ho kenya "software ea ntlafatso ea firmware ea Godox G2" pele u ntlafatsa. Ebe u khetha firmware e amanang le eona file.

Tlhokomeliso

1. Ha e khone ho kenya flash kapa shutter ea khamera. Etsa bonnete ba hore libeteri li kentsoe ka nepo le hore Power Switch e buletsoe. Sheba hore na mochine le moamoheli li behiloe mocha o le mong, haeba thaba ea hotshoe kapa mohala oa khokahanyo o hokahane hantle, kapa haeba li-flash triggers li behiloe ka mokhoa o nepahetseng.
2. Khamera e thunya empa ha e tsepamise maikutlo. Sheba hore na mokhoa oa ho tsepamisa maikutlo oa khamera kapa lense o setetsoe ho ME Haeba ho joalo, e behe ho AE
3. Tšitiso ea lets'oao kapa tšitiso ea ho thunya. Fetola kanale e fapaneng sesebelisoa.

Lebaka le Tharollo ea ho se Qalise ho Godox 2.4G Wireless

1. E sitisoa ke lets'oao la 2.4G tikolohong e kantle (mohlala, seteishene sa waelese, router ea wifi ea 2.4G, Bluetooth, jj.)
   • Fetola boemo ba CH ho flash trigger (eketsa likanale tse 10+) 'me u sebelise mocha o sa sitisoeng. Kapa tima lisebelisoa tse ling tsa 2.4G ha li sebetsa.
2. Ka kopo etsa bonnete ba hore flash e qetile ho sebetsa bocha kapa e se e fihlile ka lebelo le tsoelang pele la ho thunya kapa che (flash ready indicator e ntse e khanya) le hore flash ha e tlas'a maemo a tšireletso ho feta mocheso kapa maemo a mang a sa tloaelehang.
   • Ka kopo, theola boemo ba motlakase oa flash. Haeba flash e le ka har'a mokhoa oa TTL, ka kopo leka ho e fetolela ho M mode (ho hlokahala preflash ka mokhoa oa TTL).
3. Hore na sebaka se pakeng tsa flash trigger le flash se haufi haholo kapa che
   • Ka kopo, bulela "mokhoa o haufi oa waelese" ho sebatli sa flash ( <0.5m): Ka kopo, beha C.Fn-DlST ho 0-30m.
4. Hore na sebatli le sesebediswa sa ho qetela sa moamohedi di maemong a tlase a betri kapa tjhe
   • Ka kopo nkela betri sebaka (ho khothalletsoa hore u sebelise betri ea alkaline e lahloang ea 1.5V).

Ho hlokomela Flash Trigger

• Qoba marotholi a tšohanyetso. Sesebelisoa se ka 'na sa hloleha ho sebetsa ka mor'a ts'oaetso e matla, tšusumetso, kapa khatello e feteletseng.
• Boloka e omme. Sehlahisoa ha se na metsi. Ho se sebetse hantle, mafome le ho hola ho ka 'na ha etsahala 'me ho fetelletse ka ho fetelletseng ha ho kolobisitsoe ka metsing kapa ho pepesehetse mongobo o phahameng.
• Qoba ho fetoha ha mocheso ka tšohanyetso. Condensation e etsahala haeba mocheso oa tšohanyetso o fetoha joalo ka maemo ha o ntša transceiver ho tsoa mohahong o nang le mocheso o phahameng ho ea kantle mariha. Ka kopo, kenya transceiver ka mokotleng oa letsoho kapa mokotla oa polasetiki esale pele.
• Qoba hole le matla a khoheli a matla. Matla a matla a static kapa a makenete a hlahisoang ke lisebelisoa tse kang li-radio transmitters a lebisa ho se sebetseng hantle.

Phatlalatso ea FCC

Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

1. Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi, le
2. sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

Liphetoho life kapa life tse sa amoheloeng ka kotloloho ke mokha o ikarabellang bakeng sa tumellano li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.
Hlokomela: Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, tlas'a karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa tšebeliso 'me e ka khantša matla a maqhubu a radio, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ea seea-le-moea kapa kamohelo ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:

• Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
• Eketsa karohano pakeng tsa thepa le moamoheli.
• Hokela lisebelisoa le seketsoaneng sa potoloho se fapaneng le seo moamoheli a hokahaneng le sona.
• Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.

Sesebediswa se hlahlobilwe ho fihlela ditlhoko tse akaretsang tsa kgahlamelo ya RF. Sesebelisoa se ka sebelisoa maemong a ponts'o a nkehang ntle le thibelo.

Tiisetso

Bareki ba ratehang, kaha karete ena ea tiisetso ke setifikeiti sa bohlokoa sa ho etsa kopo ea tšebeletso ea rona ea tlhokomelo, ka kopo tlatsa foromo e latelang ka tšebelisano le morekisi 'me u e boloke ka mokhoa o sireletsehileng. Kea leboha!

Tlhahisoleseding ya Sehlahiswa	Nomoro ea Khoutu ea Sehlahisoa sa Mohlala
Moreki Boitsebiso	Lebitso Nomoro ea Lebitso
	Aterese
Lintlha tsa Morekisi	Lebitso
	Nomoro ea Kopano
	Aterese
	Letsatsi la Thekiso
Hlokomela:

Hlokomela: Foromo ena e tla tiisoa ke morekisi.

Lisebelisoa tse sebetsang

• Tokomane e sebetsa ho lihlahisoa tse thathamisitsoeng ho Tlhahisoleseding ea Paballo ea Sehlahisoa (sheba ka tlase bakeng sa lintlha tse ling).
• Lihlahisoa tse ling kapa lisebelisoa (mohlala, lintho tsa papatso, limpho, le lisebelisoa tse ling tse khomaretsoeng, joalo-joalo) ha li kenyelelitsoe sebakeng sena sa tiisetso.

Warranty Nako

• Nako ea tiisetso ea lihlahisoa le lisebelisoa e kenngoa ts'ebetsong ho latela Sehlahisoa se amehang
• Tlhahisoleseding ea tlhokomelo. Nako ea tiisetso e baloa ho tloha letsatsing (letsatsi la theko) ha sehlahisoa se rekoa lekhetlo la pele.
• Letsatsi la theko le nkuoa e le letsatsi le ngolisitsoeng kareteng ea tiisetso ha u reka sehlahisoa.

Mokhoa oa ho Fumana Tšebeletso ea Tlhokomelo

• Haeba ts'ebeletso ea tlhokomelo e hlokahala, o ka ikopanya ka kotloloho le morekisi oa lihlahisoa kapa litsi tsa litšebeletso tse lumelletsoeng.
• U ka boela ua ikopanya le mohala oa tšebeletso ea ka mor'a thekiso ea Godox 'me re tla u fa tšebeletso.
• Ha o etsa kopo ya tshebeletso ya tlhokomelo, o lokela ho fana ka karete e sebetsang ya tiisetso.
• Haeba o sa khone ho fana ka karete ea tiisetso e nepahetseng, re ka u fa tšebeletso ea tlhokomelo hang ha re netefalitse hore sehlahisoa kapa lisebelisoa li ameha molemong oa tlhokomelo, empa seo se ke ke sa nkoa e le tlamo ea rona.

Linyeoe tse sa sebelisoeng

Tiisetso le litšebeletso tse fanoang ke tokomane ena ha li sebetse maemong a latelang:

1. Sehlahisoa kapa lisebelisoa li feletsoe ke nako ea tiisetso;
2. Ho senyeha kapa ho senyeha ho bakoang ke tšebeliso e sa lokelang, tlhokomelo, kapa ho boloka, joalo ka ho paka ka mokhoa o sa lokelang, tšebeliso e sa lokelang, lisebelisoa tsa ka ntle tsa pluging, ho oa kapa ho petetsa ka matla a ka ntle, ho kopana kapa ho pepesehela mocheso o sa lokelang, solvent, acid, base. , likhohola le damp tikoloho, jj;
3. Ho senyeha kapa tšenyo e bakoang ke setsi kapa basebetsi ba sa lumelloeng nakong ea ho kenya, ho lokisa, ho fetola, ho eketsa le ho tlosoa;
4. Tlhahisoleseding e hlaolang ya sehlahiswa kapa sesebediswa e fetotswe, e fetotswe, kapa e tloswe;
5. Ha ho karete e sebetsang ea tiisetso; Tšenyo kapa ts'enyehelo e bakiloeng ke ho sebelisa software e lumelletsoeng ka molao, e sa tloaheleheng, kapa e sa lokolloeng ke sechaba;
6. Ho robeha kapa ho senyeha ho bakoang ke force majeure kapa kotsi;
7. Ho robeha kapa tšenyo e ke keng ea bakoa ke sehlahisoa ka bosona.
8. Hang ha maemo ana a fihletsoe, o lokela ho batla tharollo ho tsoa ho mekha e ikarabellang mme Godox ha a nke boikarabello.
9. Tšenyo e bakiloeng ke likarolo, lisebelisoa, le software e fetang nako ea tiisetso kapa scope ha e kenyelelitsoe sebakeng sa rona sa tlhokomelo.
10. Ho fifala ha mmala ho tloaelehileng, abrasion, le ho sebelisoa ha se ho senyeha ka har'a sebaka sa tlhokomelo.

Tlhokomelo le Boitsebiso ba Tšehetso ea Litšebeletso

• Nako ea tiisetso le mefuta ea litšebeletso tsa lihlahisoa li kenngoa ts'ebetsong ho latela tse latelang

Lintlha tsa Paballo ea Sehlahisoa:

• Godox After-Resale Call Call: 0755-29609320-8062

Phatlalatso ea Tumellano:

• GODOX Photo Equipment Co, Ltd. ka mona e phatlalatsa hore Thepa ena e lumellana le litlhoko tsa bohlokoa le lipehelo tse ling tse amehang tsa EU Directive 2014/53/EU.
• Li lumelloa ho sebelisoa linaheng tsohle tsa litho tsa EU.
• Bakeng sa tlhaiso-leseling e batsi ka DoC, ka kopo tlanya sena web sehokelo: http://www.godox.com/DOC/Godox.
• GODOX Photo Equipment Co., Ltd.
• BBuilding 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Baoan District, Shenzhen,
• 518103, China
• Tee +86-755-29609320(8062)
• Fax-+86-755-25723423
• E-mail: godox@godox.com.

Litokomane / Lisebelisoa

	Godox XProf TTl Wireless Flash Trigger [pdf] Buka ea Taelo XProf TTl Wireless Flash Trigger, XProf, TTl Wireless Flash Trigger, Wireless Flash Trigger, Flash Trigger, Trigger
	Godox XProF TTL Wireless Flash Trigger [pdf] Buka ea Taelo XProF TTL Wireless Flash Trigger, XProF, TTL Wireless Flash Trigger, Wireless Flash Trigger, Flash Trigger, Trigger

Litšupiso

• Bukana ea Mosebelisi