414803 DMX Operator Controller e nang le 192 Channels

Ka kopo, 'nete e na le lintlha tsa bohlokoa. Papatso ea monna enoa pele ho sesebelisoa sa tšebetso.

Likaroloana

• Laola ho fihla ho liteishene tse 192 tsa DMX
• Laola ho fihla ho mabone a bohlale a 12 a arohaneng a DMX a nang le liteishene tse fihlang ho tse 16 tsa DMX papali ka 'ngoe.
• Rekota ho fihla ho 6 ho lelekisa ka linako tse arohaneng tsa fade le lebelo la mehato
• Li-faders tse 8 tsa motho ka mong
• MIDI ea laoleha
• Khokahano ea 3-Pin DMX
• Microphone e hahiloeng

Litlhokomelo tsa Tšireletso

• Ho fokotsa kotsi ea ts'abo ea motlakase kapa mollo, se ke oa pepesa yuniti ena ea pula kapa mongobo
• Se ke oa tšela metsi kapa lino tse ling ka har'a kapa ho li isa yuniti ea hau.
• Se ke oa leka ho sebelisa yuniti ena haeba phepelo ea motlakase e senyehile kapa e felile
• Le ka mohla u se ke ua sebelisa sesebelisoa sena ha sekoahelo se le teng
• Le ka mohla u se ke ua hokela yuniti ena paketeng ea dimmer
• Kamehla etsa bonnete ba hore u beha yuniti ena sebakeng se tla lumella moea o nepahetseng. Lumella hoo e ka bang 6″ (15cm) pakeng tsa sesebelisoa sena le a
• U se ke ua leka ho sebelisa molaoli ona, haeba o senyeha.
• Yuniti ena e etselitsoe ts'ebeliso ea kahare feela, ts'ebeliso ea sehlahisoa sena kantle ho naha e hlakola liwaranti tsohle.
• Nakong ea nako e telele e sa sebelisoe, khaola matla a mantlha a yuniti.
• Kamehla beha yuniti ena sebakeng se sireletsehileng le se tsitsitseng.
• Lithapo tsa phepelo ea motlakase li lokela ho tsamaisoa e le hore ho se ke ha etsahala hore li tsamae kapa li pinngoe ke lintho tse behiloeng holim'a tsona kapa khahlanong le tsona, ho ela hloko haholo ntlha eo li tsoang ho eona.
• Mocheso -Molaoli o lokela ho ba hole le mehloli ea mocheso joalo ka li-radiator, lirejisete tsa mocheso, litofo kapa lisebelisoa tse ling (ho kenyeletsoa amplifiers) tse hlahisang mocheso.
• Mookameli o lokela ho sebeletsoa ke basebeletsi ba nang le phihlelo ha:
  Thapo ea phepelo ea motlakase kapa polaka e senyehile.
  B. Lintho li oele, kapa mokelikeli o tšolotsoe ka har'a molaoli.
  C. Mookameli o ne a pepesitsoe ke pula kapa metsi.
  D. Taolo ha e bonahale e sebetsa ka tsela e tloaelehileng kapa e bonts'a phetoho e hlakileng ea ts'ebetso.
  E. Molaoli o oele le/kapa o kene ka ho feteletseng

Taolo le Mesebetsi

1. LIKONONANE TSA TŠEBELETSO - E sebelisetsoa ho khetha lisebelisoa tse 12 kapa tse ling kaofela. Sena ke sona se khethang hore na ke liteishene life tsa DMX tse eang ho li-fixtures.
   Sheba aterese ea litlhophiso leqepheng la 9 bakeng sa lintlha tse ling
2. LIKONANE TSA SCENE - E sebelisoa ho boloka Scenes ka mokhoa oa lenaneo kapa ho bapala lipapali tsa hau ka mokhoa oa ho bapala
3. Setšoantšo sa LCD - E bonts'a boleng le li-setting ho latela ts'ebetso e khethiloeng.
4. BANK BUTTONS (OR)- Khetha hore na u batla ho sebelisa Banka efe. (ho na le libanka tse 30 tse khethiloeng ka kakaretso.)
5. CHASE - E sebelisetsoa ho khetha ho lelekisa (1-6).
6. LENANEO - E sebedisetswa ho kenya tshebetsong mokgwa wa lenaneo. Pontšo ea ho panya ha e kentsoe.
7. MIDI / REC - E sebelisoa ho laola ts'ebetso ea MIDI kapa ho Rekota mohato o mong le o mong bakeng sa Scenes le Chases.
8. AUTO/DEL- Khetha lebelo la AUTO ka mokhoa oa ho lelekisa kapa Lits'oants'o tse Hlakotsoeng le kapa ho lelekisa.
9. AUDIO / BANK COPY- E sebelisetsoa ho kenya tšebetsong molumo ka mokhoa oa Chase kapa ho kopitsa libanka tsa litšoantšo ho tloha ho e 'ngoe ho ea ho e' ngoe ka Mokhoa oa Lenaneo.
10. BLACKOUT - E tima kapa e lumella liphetho tsohle tsa kanale.
11. TLANYA SYNC / BONTŠA - Ka Auto Chase mode e ne e sebelisoa ho fetola sekhahla sa ho lelekisa. E boetse e sebelisetsoa ho fetola Pontšo ea LCD ho Chase Manual.
12. FADE TIME SLIDER - E sebelisoa ho lokisa FADE TIME. Nako ea Fade ke nako e nkang Opereishene ea DMX ho fetoha ka botlalo ho tloha sebakeng se seng ho ea ho se seng.
    Bakeng sa mohlalaample; haeba selaete sa nako ea fade se behiloe ho 0 (zero) phetoho ea ketsahalo e tla ba hang-hang. Haeba selaete se behiloe ho '30s' ho tla nka DMX Operator metsotsoana e 30 ho phethela phetoho ho tloha sebakeng se seng ho ea ho se seng.
13. SPEED SLIDER - E sebelisoa ho fetola sekhahla sa lebelo la ho lelekisa ho Auto Mode.
14. KHETHA LEQEPHE - E sebelisoa ho fetola lipakeng tsa LEQEPHE A (1-8) & LEQEPHE B (9-16) libanka tsa kananelo.
15. LITŠOANTŠISO (1-8) - E sebelisetsoa ho fetola mocha / litekanyetso ho tloha ho 0% ho isa ho 100%.

Lihokelo tsa Morao

16. MIDI IN - E Fumana data ea MIDI.
17. DMX OUT - E sebelisoa ho romella lets'oao la DMX ho li-fixtures kapa Packs.
18. USB INTERFACE - USB INTERFACE ena e na le lisebelisoa tse 3:

• Hokela USB LED lamp, e nang le tlhahiso ea MAX ea hona joale ea 500mA (Leseli ha le Kenyelelitsoe).
• Hokela thupa ea USB (ha e kenyelelitsoe) 'me u boloke litlhophiso tsohle tsa taolo (ho lelekisa/litšoantšo/litlhophiso tse ling). O khona ho etsa backup 12 files (litlhophiso 1-12).
  Ka kopo, sheba leqephe la 16 bakeng sa litaelo tsa bekapo.
• Ikopanye le thupa ea USB (ha e kenyelelitsoe) ho kenya firmware e ncha ea taolo.
  HLOKOMELA: Ka kopo ikopanye le tšehetso ea bareki ba ADJ bakeng sa lintlha tse ling.

19. DC INPUT - E amohela DC 9 ~ 12V, 300 mA bonyane, phepelo ea motlakase.

Ho bua ka DMX

LIEKETSENG KHABANE
E le hore ho be le taolo ea motho ka mong ea sesebelisoa se seng le se seng le DMX Operator, aterese ea aterese e lokela ho rarolloa ka tsela e latelang.
Tokiso # 1 e qala ho 1
Tokiso # 2 e qala ho 17
Tokiso # 3 e qala ho 33
Tokiso # 4 e qala ho 49
Tokiso # 5 e qala ho 65
Tokiso # 6 e qala ho 81
Tokiso # 7 e qala ho 97
Tokiso # 8 e qala ho 113
Tokiso # 9 e qala ho 129
Tokiso # 10 e qala ho 145
Tokiso # 11 e qala ho 161
Tokiso # 12 e qala ho 177

Lits'oants'o tsa Lenaneo

1. penya, 'me U TŠOETSE KONANE EA LENANEO (6) metsotsoana e meraro (3) ho kenya tšebetsong mokhoa oa lenaneo. LCD DISPLAY (3) e tla bontsha hore molaodi o le mokgweng wa lenaneo ka ho hlahisa lebone le ntseng le panya ka potlako haufi le 'PROG.
2. Kgetha sebopeho sa lenaneo ka ho tobetsa FIXTURE BUTTONS 1 HO TSA 12 (1).
3. Fetola li-fader ho li-setting tsa fixture tse lakatsehang (ke hore, Mmala, Gobo, Pan, Tilt, Speed, joalo-joalo), ka ho fetola boleng ba fader ho tloha ho 0-255. Sebelisa LEQEPHE LA A, BUTTON (14) haeba sebopeho sa hau se na le likanale tse fetang tse robeli. Ha o tloha Leqepheng la A ho ea ho la B, o tlameha ho tsamaisa li-fader ho kenya likanale.
4. Hang ha li-setting tsa fixture tse lakatsehang li se li entsoe, tobetsa konopo e khethiloeng ea FIXTURE (1) ho emisa tokiso ea sebopeho seo. Tobetsa konopo e 'ngoe ea FIXTURE (1) ho khetha sebopeho se seng seo u ka se fetolang. Etsa litokiso ho li-fixtures tse ngata ka nako e le 'ngoe ka ho khetha LI-BUTTONS tse ngata tsa FIXTURE (1) ka nako.
5. Pheta mehato ea 2 le ea 3 ho fihlela litlhophiso tsohle tsa tokiso li phethiloe.
6. Ha ketsahalo eohle e se e hlophisitsoe, tobetsa 'me u lokolle BUTTON ea MIDI / REC (7).
7. Tobetsa KONONENG EA 1-8 (2) ea SENESE ho boloka ketsahalo ena. LILED TSOHLE LI BLINK 3 TIMES mme LCD e tla bonts'a banka le sebaka seo sebaka se neng se bolokiloe ho sona.
8. Pheta mehato ea 2-8 ho hatisa liketsahalo tse 8 tsa pele.
   U ka kopitsa litlhophiso ho tloha konopo e 'ngoe ho ea ho e' ngoe haeba u batla ho eketsa mabone a eketsehileng lenaneong la hau. Tobetsa feela 'me u tšoare konopo ea fixture eo u batlang ho e kopitsa ebe u tobetsa konopo ea fixture eo u batlang ho kopitsa ho eona.
9. Sebelisa likonopo tsa UP le DOWN BANK (4) ho rekota libanka tse ling tsa liketsahalo. Ho na le kakaretso ea libanka tse 30 tseo u ka li bolokang ho fihlela liketsahalong tse 8 bankeng ka kakaretso bakeng sa liketsahalo tse 240.
10. Ho tsoa ho Mokhoa oa Lenaneo tobetsa ebe o tšoara KONANE EA LENANEO (6) metsotsoana e meraro. Ha o tsoa ho Mokhoa oa Lenaneo, Blackout LED e butse, ho tima, tobetsa konopo ea BLACKOUT (10).

Editing Scenes

SCENE KOPI:
Ts'ebetso ena e u lumella ho kopitsa litlhophiso tsa sebaka se seng ho ea ho se seng.

1. Tobetsa KONANE EA LENANEO (6) metsotsoana e meraro ho kenya Mokhoa oa Lenaneo. LCD DISPLAY (3) e tla bontsha Mokgwa wa Lenaneo ka ho hlahisa letheba le sa kgaotseng le panyang ka potlako haufi le “PROG”.
2. Sebelisa LIKONANE TSA HO PHAHAMA LE TLASE (4) ho fumana banka/sebaka seo u lakatsang ho se kopitsa.
3. Tobetsa KONANE EA SCENE (2), e nang le ketsahalo eo u batlang ho e kopitsa.
4. Sebelisa likonopo tsa UP le TLASE (4) ho khetha banka eo le uena u batlang ho e kopitsa.
5. Tobetsa konopo ea MIDI / REC (7) e lateloang ke LEBONE LA SCENE (2) leo u lakatsang ho kopitsa ho lona.

EDIRISO YA SCENE:
Ts'ebetso ena e u lumella ho etsa liphetoho sebakeng se itseng ka mor'a hore se hlophisoe.

1. Tobetsa KONANE EA LENANEO (6) metsotsoana e meraro ho kenya Mokhoa oa Lenaneo.
   LCD DISPLAY (3) e tla bontsha Mokgwa wa Lenaneo ka ho hlahisa letheba le sa kgaotseng le panyang ka potlako haufi le “PROG”.
2. Sebelisa LIKONANE TSA HO PHAHAMA LE TLASE (4) ho khetha banka/sebaka seo u lakatsang ho se fetola.
3. Kgetha ketsahalo eo o batlang ho e hlophisa ka ho tobetsa BUTTON YA SENESE (2).
4. Sebelisa FADERS (15) ho etsa liphetoho tseo u li batlang.
5. Hang ha u se u entse liphetoho, tobetsa MIDI / REC BUTTON (7) e lateloa ke SCENE BUTTON (2) e tsamaellanang le ketsahalo eo u e hlophisang e tla boloka ketsahalo e hlophisitsoeng mohopolong.
   Tlhokomeliso: Etsa bonnete ba hore u khetha ketsahalo e tšoanang e khethiloeng mohatong oa 4, ho seng joalo u ka rekota ka phoso sebakeng se seng se ntse se le teng.

TLHOKOMELA TSOHLE LIKETSAHALO TSOHLE:
Ts'ebetso ena e tla hlakola lits'oants'o tsohle ho Libanka tsohle. (Liteishene TSOHLE tsa lits'oants'o tsohle li hlophisitsoe bocha ho 0 tlhahiso.

1. Tobetsa o hatelle konopo ea PROGRAM (6)
2. Ha u ntse u ts'oaretse KONONOLO EA LENANEO (6), tobetsa 'me u tšoare KONONELO EA BANK (4).
3. Tlosa motlakase ho molaoli ebe o lokolla likonopo.
4. Kopanya matla hape ho molaoli, 'me litšoantšo tsohle li lokela ho hlakoloa.

KOPIA BANK OF SCENES:
Mosebetsi ona o tla kopitsa litlhophiso tsa banka e 'ngoe ho ea ho e' ngoe.

1. Tobetsa KONANE EA LENANEO (6) metsotsoana e meraro ho kenya Mokhoa oa Lenaneo. LCD DISPLAY (3) e tla bontsha Mokgwa wa Lenaneo ka ho hlahisa letheba le sa kgaotseng le panyang ka potlako haufi le “PROG”.
2. Kgetha KONONNE YA BANK (4) eo o batlang ho e kopitsa
3. Tobetsa 'me u lokolle BUTTON ea MIDI/REC (7)
4. Khetha BUTTON EA BANK (4) eo u lakatsang ho rekota ho eona.
5. Tobetsa AUDIO/BANK COPY BUTTON (9), mme LCD DISPLAY (3) e tla benya ha kgutshwane ho bontsha hore mosebetsi o phethilwe.

HLAKOLA BANK OF SENES:

1. Tobetsa KONANE EA LENANEO (6) metsotsoana e meraro ho kenya Mokhoa oa Lenaneo. LCD DISPLAY (3) e tla bontsha Mokgwa wa Lenaneo ka ho hlahisa letheba le sa kgaotseng le panyang ka potlako haufi le “PROG”.
2. Khetha BUTTON EA BANK (4) eo u batlang ho e hlakola
3. Tobetsa o hatelle AUTO/DEL BUTTON (8).
4. Ha u ntse u tšoere BUTTON ea AUTO/DEL (8) tobetsa 'me u tšoare AUDIO/BANK COPY BUTTON (9) ka nako e le 'ngoe.
5. Lokolla likonopo ka bobeli ka nako e le 'ngoe,' me LCD DISPLAY (3) e lokela ho bonesa nakwana ho bontsha hore mosebetsi o phethilwe.

HLAKOLA KETSAHALO:
Ts'ebetso ena e tla hlophisa liteishene tsohle tsa DMX ho SCENE e le 'ngoe ho khutlela ho 0.

1. Ha o ntse o tobetsa o ts'oere BUTTON YA AUTO/DEL (8), Tobetsa o lokolle KONONNE YA SCENE (2) 1-8 eo o batlang ho e phumula.

Lenaneo le lelekisa / ho hlophisa

LITABA TSA LENANEO:
HLOKOMELA: O TSHWANETSE HO ETSA LENANESO LIKETSAHALO PELE O KA KHAHLISA LENANEO.

1. Tobetsa KONANE EA LENANEO (6) metsotsoana e meraro ho kenya Mokhoa oa Lenaneo.
   LCD DISPLAY (3) e tla bontsha Mokgwa wa Lenaneo ka ho hlahisa letheba le sa kgaotseng le panyang ka potlako haufi le “PROG”.
2. Kgetha KOPANO efe kapa efe ya CHASE 1 HO TSA 6 (5) ho etsa lenaneo.
3. Khetha BUTTON EA SCENE (2) eo u e batlang ho tsoa bankeng efe kapa efe e rekotiloeng pele.
4. Tobetsa konopo ea MIDI/REC (7) 'me li-LED kaofela li tla benya ka makhetlo a 3
5. Pheta mehato ea 3 & 4 hangata kamoo u batlang. U ka boloka mehato e fihlang ho 240 ho lelekisa ha 'ngoe.
6. Ho tsoa ho Mokhoa oa Lenaneo, tobetsa KONANE EA LENANEO (6) metsotsoana e meraro. LCD DISPLAY (3) e tla bontsha Mokgwa wa Blackout ka ho hlahisa letheba le sa kgaotseng le panyang ka potlako haufi le "Blackout". Hona joale o ka bapala Rekotiloeng Chase. (Bona leqephe la 15-16)

PHETHA LEHELE
KENYA MOHATO:

1. Tobetsa KONANE EA LENANEO (6) metsotsoana e meraro ho kenya Mokhoa oa Lenaneo.
   LCD DISPLAY (3) e tla bontsha Mokgwa wa Lenaneo ka ho bontsha lebone le sa kgaotseng le benyang haufi le “PROG”.
2. Kgetha KOPANO YA CHASE 1 HO YA 6 (5) ha o lakatsa ho eketsa mohato ho.
3. Tobetsa 'me u lokolle TAPANO SYNC/DISPLAY BONTŠO (11), mme LCD DISPLAY jwale e tla bontsha kgato eo o leng ho yona.
4. Ka mor'a ho khetha TAP SYNC/ BONTŠA KOTANE (11) sebelisa LIKOONO TSA HO PHAHAMA le HO TLASE ho tsamaisetsa MOHATO oo u lakatsang ho o kenya mohato ka mor'a moo.
5. Tobetsa MIDI/REC BUTTON (7) LCD DISPLAY e tla bontsha nomoro ya mohato o le mong ho feta.
6. Tobetsa Konopo ea Scene eo u batlang ho e kenya.
7. Tobetsa MIDI/REC BUTTON (7) hape ho kenya mohato o mocha.
8. Tobetsa o lokolle TAP SYNC/DISPLAY BUTTON (11) ho kgutlela tshebetsong e tlwaelehileng.

HLAKOLA MOHATO:

1. Tobetsa KONANE EA LENANEO (6) metsotsoana e meraro ho kenya Mokhoa oa Lenaneo.
   LCD DISPLAY (3) e tla bontsha Mokgwa wa Lenaneo ka ho bontsha lebone le sa kgaotseng le benyang haufi le “PROG”.
2. Kgetha KOPANO YA CHASE 1 HO YA 6 (5) e nang le mohato oo o batlang ho o hlakola.
3. Tobetsa 'me u lokolle KOPANO YA TAP SYNC/DISPLAY (11).
4. Ka mor'a ho khetha TAP SYNC/DISPLAY BUTTON (11) sebelisa LIKONONOLO TSA PHAHAMA le HO TLAFATSA ho tsamaisetsa mohatong oo u lakatsang ho o hlakola.
5. Ha u se u fihlile mohatong oo u lakatsang ho o hlakola, tobetsa 'me u lokolle AUTO/DEL BUTTON (8).

HLAKOLA TSELA E FELETSENG:

1. Tobetsa KONANE EA LENANEO (6) metsotsoana e meraro ho kenya Mokhoa oa Lenaneo.
   LCD DISPLAY (3) e tla bontsha Mokgwa wa Lenaneo ka ho bontsha lebone le sa kgaotseng le benyang haufi le “PROG”.
2. Tobetsa o hatelle AUTO/DEL BUTTON (8).
3. Ha u ntse u tšoere BUTTON (8) ea AUTO/DEL (1) tobetsa CHASE BUTTON 6 HO XNUMX eo u batlang ho e hlakola, habeli. Sehlahisoa se lokela ho tlosoa.

HLAKOLA LITŠOANTŠISO TSOHLE:
Ts'ebetso ena e tla u lumella ho hlakola memori eohle ea ho lelekisa (hlakola lits'oants'o tsohle).

1. Tobetsa o hatelle AUTO/DEL (8) & BANK DOWN BUTTONS (4).
2. Ha u ntse u tšoere AUTO/DEL (8) & BANK DOWN BUTTONS (4) hakolla motlakase.
3. Ho ts'oara AUTO/DEL (8) & BANK DOWN BUTTONS (4) hokela hape motlakase bakeng sa metsotsoana e 3 ho panya ha LED ho lokela ho hlakoloa.

Libaka tsa ho Bapala le ho lelekisa

LIKETSAHALO TSA MOTSOALI:

1. Ha motlakase o bulelwa ka lekhetlo la pele, yuniti e ho Manual Scene Mode.
2. Etsa bonnete ba hore AUTO & AUDIO BUTTON LED'S (8 & 9) li tingoe.
3. Kgetha BUTTON YA BANK (4) eo o e batlang o sebedisa LIKONANE TSA UP le TLASE (4), tse bolokang litšoantšo tseo o lakatsang ho li bapala.
4. Tobetsa KONANE EA SCENE (2) ho tsamaisa ketsahalo eo u e khethileng.

LITLHAKISO TSA MANUAL RUN:
Ts'ebetso ena e tla u lumella ho tsamaea ka letsoho litšoantšong tsohle ho Chase efe kapa efe.

1. Tobetsa KONANE EA LENANEO (6) metsotsoana e meraro ho kenya Mokhoa oa Lenaneo. LCD DISPLAY (3) e tla bontsha Mokgwa wa Lenaneo ka ho hlahisa letheba le sa kgaotseng le panyang ka potlako haufi le 'PROG.'
2. Phethahatsa ho lelekisa ka ho khetha KOTHONONO EA 1 HO TSA 6 (5).
3. Tobetsa konopo ea TAP SYNC (11).
4. Sebelisa likonopo tsa BANK (4) ho phenya ho lelekisa.
   Hlokomela: LCD BONTŠO e tla bontša palo ea mohato ho Chase eseng Scene bank/ nomoro.

SEBELISA LIKETSAHALO TSA MOSEBETSI:
Ts'ebetso ena e tla tsamaisa banka ea liketsahalo tse hlophisitsoeng ka tatellano ea tatellano.

1. Tobetsa konopo ea AUTO/DEL (8) ho kenya Auto Mode. Lebone le benyang ho LCD DISPLAY (3) le tla bontsha Auto Mode.
2. Sebelisa likonopo tsa UP le TLAS'A BANK (4), ho khetha banka ea liketsahalo tseo u ka li sebelisang.
3. Ka mor'a ho khetha banka ea lipapali tseo u batlang ho li tsamaisa, u ka sebelisa li-fader tsa SPEED (13) le FADE (12) ho fetola mokhoa oa ho lelekisa ketsahalo.
   Tlhokomeliso: U ka fetola libanka, ho tsamaisa tatellano e fapaneng ea liketsahalo, ka nako efe kapa efe ka ho tobetsa LIKONANE TSA UP le HO TLAFATSA BANK (4).
   Tlhokomeliso: Ha U fetola nako ea Fade ha ho mohla e etsang hore e be butle ho feta Speed ​​setting kapa ketsahalo ea hau e ke ke ea phethoa pele mohato o mocha o romelloa.

AUTO RUN CHASES:

1. Khetha ntho eo u e batlang ka ho tobetsa LIKONOANE life kapa life tse tšeletseng tsa CHASE (5).
2. Tobetsa 'me u lokolle BUTTON ea AUTO/DEL (8).
3. LED e tsamaisanang e tla benya ho LCD DISPLAY (3) e bonts'a Auto mode e kenelletse.
4. Fetola linako tsa SPEED (13) le FADE (12) ho li-setting tseo u li batlang.
5. Ho lelekisa hona joale ho tla matha ho ea ka lebelo la hau le behiloeng le nako ea fade.
   Hlokomela: U ka feta lebelo ka ho tlanya TAP SYNC / DISPLAY BUTTON (11) makhetlo a mararo, ho lelekisa ho ne ho tla matha ho latela nako ea lipompo tsa hau.
   Hlokomela: ha Ho fetola nako ea fade ha ho mohla ho etsang hore e be butle ho feta Speed ​​setting kapa litšoantšo tsa hau li ke ke tsa phethoa pele mohato o mocha o romeloa.
   Hlokomela: Haeba u batla ho kenyelletsa Chase kaofela, tobetsa konopo ea AUTO/DEL (8) pele u khetha Chase.

MANTHA LITŠOANTŠISO KA HO SEBELISA HO SEBELISA HO SEBETSA:

1. Tobetsa konopo ea AUIDO/BANK COPY (9) ho bulela LED e tsamaisanang le eona ho LCD DISPLAY (3).
2. Khetha banka e ts'oereng liketsahalo tseo u lakatsang ho li lelekisa ka ho sebelisa LIKONANE TSA PHAHAMA kapa TLASE (4), u ka sebelisa molaoli oa MIDI ho fetola liketsahalo (sheba ts'ebetso ea MIDI).
3. Tobetsa AUDIO/BANK KOPITSO (9) ho tsoa.

RUN CHASES KA HO SEBELISA HO SEBETSA HO SOUND:

1. Khetha eo u e batlang ka ho tobetsa e 'ngoe ea likonopo tse tšeletseng tsa CHASE (5).
2. Tobetsa 'me u lokolle AUDIO/BANK KOPITSO EA (9).
3. LED e tsamaellanang e tla benya ka har'a LCD DISPLAY (3) e bonts'a hore Audio mode e kenelletse.
4. Chase joale e tla matha ho utloahala.

FETOLA MAIKUTLO A MORUMO:

1. Tobetsa konopo ea AUIDO/BANK COPY (9) ho bulela LED e tsamaisanang le eona ho LCD DISPLAY (3).
2. Tobetsa 'me u hatelle KONANE (9) ea AUIDO/BANK COPY (4) 'me u sebelise BANK UP/TLASE (XNUMX) ho lokisa kutlo ea molumo.

Backup Data / Upload Data / Firmware Update U sebelisa USB Stick

TLHOKOMELISO: THUPA YA USB E TSHWANETSE HO HLOMELA HO HLOMELA FAT32 KAPA FAT 16. BUKA EA DATA YA USB:

1. Kenya thupa ea hau ea USB ka har'a sebopeho sa USB se ka morao. Tobetsa o hatelle AUTO/DEL BUTTON (8), ebe o tobetsa KONONANA EA BANK UP (4).
2. LCD DISPLAY (3) e tla bontsha "BOLOKA".
3. Tobetsa konopo e lakatsehang ea FIXTURE (1) (li-fixtures 1-12), ho boloka litlhophiso tsohle tsa sesebelisoa seo ho drive ea USB. O ka etsa li-backups tse fihlang ho tse 12 files.
4. Ka mor'a hore u qete ho boloka li-setting tseo u li batlang, u ka fetisetsa lifaeleho tsa hau files ho komporo e le bekapo.

HLAHLOBA TS'OANELO FILES HO COMPUTER:

1. Kenya thupa ea USB ka sesebelisoa sa hau sa bekapo files kena komporong. Bula foldara e tšoailoeng "DMX _OPERATOR". Sebopeho sa hau files e tla hlahisoa e le "FileX”. "X" e emela karolo e le 'ngoe ho tse 1 files.

LAOA DATA YA USB:

1. Kenya thupa ea hau ea USB ka har'a sebopeho sa USB se ka morao. Tobetsa o hatelle AUTO/DEL BUTTON (8), ebe o tobetsa KONONANA EA BANK (4).
2. TŠEBELETSO EA LED (3) e tla bontša "LOAD".
3. Li-LED tsa FIXTURE BUTTON tse neng li bolokiloe thupeng ea USB joale li tla khanya.
4. Tobetsa konopo ea FIXTURE (1) e tsamaellanang le eona eo u ka ratang ho kenya li-setting tse tsamaellanang le eona. Ka mor'a ho tobetsa konopo ea FIXTURE, litlhophiso tsa "backup" joale li tla romelloa ho FIXTURE BUTTON.

Ntlafatso ea FIRWARE:
Latela litaelo tsena tse bonolo ho ntlafatsa firmware ea taolo.

1. Tlosa selaoli.
2. Hokela USB drive e tsamaellanang le eona ea FAT 16 kapa FAT 32 komporong e khomphuthang e jarollotseng firmware e ncha ea DMX Operator.
   Bula koloi ea USB khomphuteng 'me u thehe foldara e bitsoang "DMX_OPERATOR".
   Kenya ntlafatso ea firmware e jarollotsoeng file ho "DMX_OPERATOR" foldareng.
3. Tlosa koloi ea USB ka nepo khomphuteng.
4. Kenya USB drive ka har'a sebopeho sa USB se ka morao ho molaoli.
5. Tobetsa 'me u hatelle LIKONANE TSA TŠEBELETSO EA 1, TŠEBELETSO EA 2 (1), le KONONOLO EA 3 (2) 'me ha u ntse u tobetsa likonopo tsena, kenya matla HO selaoli.
6. Kamora metsotsoana e ka bang 3, ponts'o ea LED e lokela ho bonts'a "UPFR". Ha sena se hlahiswa, lokolla LIKONANE TSA TŠEBELETSO EA 1, TŠEBELETSO EA 2 (1) le KENETSO EA 3 (2).
7. Ka mor'a ho lokolla bobeli BUTTONS TŠEBELETSO (1) le SCENE 3 BUTTON (2), tobetsa konopo efe kapa efe ho molaoli ho kenya firmware e ncha. file ho Opereishene ea DMX.

Ts'ebetso ea MIDI

Ho kenya ts'ebetso ea MIDI:

1. Tobetsa o hatelle BUTTON (7) ea MIDI/REC metsotsoana e meraro, 'me linomoro tse peli tsa ho qetela tsa LCD DISPLAY (3) li tla BLINK ho bonts'a Mokhoa oa MIDI.
2. Sebelisa likonopo tsa HO HOLIMO LE TLASE (4) ho khetha MIDI Channel 1 HO TSA 16 eo u batlang ho e kenya tšebetsong.
3. Tobetsa o hatelle MIDI/REC BUTTON (7) metsotsoana e meraro, ho tsoa tšebetsong ena.

MIDI CHANNEL SEBAKA

BANK (Octave)	ELA HLOKO NOMA	MOSEBETSI
BANK 1	00 HO 07 1 ho isa ho 8 ea Banka ea 1	hodima kapa ho tima
BANK 2	08 HO 15 1 ho isa ho 8 ea Banka ea 1	hodima kapa ho tima
BANK 3	16 HO 23 1 ho isa ho 8 ea Banka ea 1	hodima kapa ho tima
BANK 4	24 HO 31 1 ho isa ho 8 ea Banka ea 1	hodima kapa ho tima
BANK 5	32 HO 39 1 ho isa ho 8 ea Banka ea 1	hodima kapa ho tima
BANK 6	40 HO 47 1 ho isa ho 8 ea Banka ea 6	hodima kapa ho tima
BANK 7	48 HO 55 1 ho isa ho 8 ea Banka ea 7	hodima kapa ho tima
BANK 8	56 HO 63 1 ho isa ho 8 ea Banka ea 8	hodima kapa ho tima
BANK 9	64 HO 71 1 ho isa ho 8 ea Banka ea 9	hodima kapa ho tima
BANK 10	72 HO 79 1 ho 8 ea Bank10	hodima kapa ho tima
BANK 11	80 HO 87 1 ho 8 ea Bank11	hodima kapa ho tima
BANK 12	88 HO 95 1 ho 8 ea Bank12	hodima kapa ho tima
BANK 13	96 HO 103 1 ho 8 ea Bank13	hodima kapa ho tima
BANK 14	104 HO 111 1 ho 8 ea Bank14	hodima kapa ho tima
BANK 15	112 HO 119 1 ho 8 ea Bank14	hodima kapa ho tima
LEKELETSO	120 HO 125 1 ho isa ho 6 Chase	hodima kapa ho tima

LETS'OANE
DMX OPERATOR e fumana feela lintlha tsa MIDI mme o kanna oa tlameha ho fetolela keyboard ea hau ho fumana lintlha tse nepahetseng.

Ho batle phoso

Ka tlase ho thathamisitsoe mathata a 'maloa a tloaelehileng ao mosebelisi a ka kopanang le ona, a nang le tharollo.
Yuniti ha e arabe ha ke tsamaisa li-fader

• Netefatsa hore aterese e nepahetse.
• Etsa bonnete ba hore lebelo le fetotsoe, haeba le teng, bakeng sa ho tsamaea kapele. Ha se Litlhophiso tsohle tse nang le phetoho ea lebelo.
• Haeba kakaretso ea thapo ea XLR e feta maoto a 90 etsa bonnete ba hore e felisitsoe hantle.

Litšoantšo ha li bapale ka mor'a hore ke li rekote

• Etsa bonnete ba hore o tobetsa MIDI/RECORD BUTTON, pele o tobetsa SCENE BUTTON.
  Li-LED li lokela ho panya ka mor'a ho tobetsa KONONONG le 'ngoe ea SCENE.
• Etsa bonnete ba hore u bankeng e nepahetseng e nang le litšoantšo tse rekotiloeng.

Litšoantšo ha li bapale hantle joalo ka ha ke li rekotile

• Na Nako ea Fade ea ho labalabela Lebelo e khethiloe?
• Etsa bonnete ba hore u bankeng e nepahetseng e nang le litšoantšo tse rekotiloeng.
• Haeba kakaretso ea thapo ea XLR e feta maoto a 90 etsa bonnete ba hore e felisitsoe hantle.

Chases ha e bapale ka mor'a hore ke e rekote

• Etsa bonnete ba hore o tobetsa MIDI/RECORD BUTTON, ka mor'a ho tobetsa SCENE BUTTON. Li-LED li lokela ho panya ka mor'a ho tobetsa MIDI/RECORD BUTTON.
• Etsa bonnete ba hore u sebakeng se nepahetseng sa Chase se nang le mehato e tlalehiloeng.
• Haeba e le ho Auto Mode, na E khethoa ho Pontšo? A na u kile ua fetola Lebelo ka mor'a ho khetha Auto?
• Na Nako ea Fade ea ho labalabela lebelo le khethiloe?
• Haeba kakaretso ea thapo ea XLR e feta maoto a 90 etsa bonnete ba hore e felisitsoe hantle.

Litlhaloso

Motsamaisi oa DMX

Keletso ea DC:	9V - 12VDC, 500mA Min.
Boima ba 'mele:	5 lbs./ 2.25 Dikg.
Boholo:	5.25” (L) x 19” (W) x 2.5” (H) 133.35 x 482.6 x 63.5mm
Tiisetso:	Selemo se le 2 (matsatsi a 730)

Lemoha ka kopo: Litlhaloso le lintlafatso moralong oa yuniti ena le bukana ena li ka fetoha ntle le tsebiso e ngotsoeng pele.

Litokomane / Lisebelisoa

FOS 414803 DMX Operator Controller e nang le 192 Channels [pdf] Bukana ea Mosebelisi 414803, DMX Operator Controller e nang le 192 Channels, 414803 DMX, Operator Controller ea 192 Channels, 414803 DMX Operator Controller e nang le 192 Channels.

Litšupiso

• Bukana ea Mosebelisi