FOS - chizindikiro414803 DMX Operator Controller yokhala ndi 192 ChannelsFOS 414803 DMX Operator Controller yokhala ndi 192 Channels

PROBOAT PRB08043 BlackJack 42 Inch Brushless 8S Catamaran - chithunzi 3Chonde zenizeni zili ndi zofunikira. Munthu uyu amatsatsa malonda asanayambe.

Zamkatimu kubisa
1 Mawonekedwe
2 Chitetezo
3 Ulamuliro ndi Ntchito
4 Zolumikizira Zam'mbuyo
5 DMX Address
6 Mawonekedwe a Mapulogalamu
7 Kusintha Zithunzi
8 Kuthamangitsa Mapulogalamu / Kusintha
9 Masewera Osewera & Kuthamangitsa
10 Sungani Data / Kwezani Data / Firmware Kusintha Pogwiritsa Ntchito Ndodo ya USB
11 Ntchito ya MIDI
12 Kusaka zolakwika
13 Zofotokozera
14 Zolemba / Zothandizira
14.1 Maumboni
15 Zolemba Zogwirizana

Mawonekedwe

  • Sinthani mpaka 192 DMX Channels
  • Yang'anirani mpaka 12 Osiyanitsa anzeru a DMX magetsi okhala ndi ma tchanelo 16 a DMX pachilichonse
  • Jambulani mpaka kuthamangitsa 6 komwe kumakhala ndi nthawi zosiyana komanso kuthamanga kwa masitepe
  • 8 mitundu yamunthu
  • MIDI controlable
  • 3-Pin DMX Connection
  • Maikolofoni Omangidwa

Chitetezo

  • Kuchepetsa chiwopsezo cha kugwedezeka kwamagetsi kapena moto, musawonetse mvula kapena chinyezi chagawoli
  • Osataya madzi kapena zakumwa zina mkati kapena kupitilira pagawo lanu.
  • Osayesa kugwiritsa ntchito chipangizochi ngati magetsi atha kapena br
  • Musagwiritse ntchito chipangizochi pamene chivundikirocho chili
  • Osalumikiza chipangizochi ku paketi ya dimmer
  • Nthawi zonse onetsetsani kuti mwayika gawoli pamalo omwe angalole mpweya wabwino. Lolani pafupifupi 6″ (15cm) pakati pa chipangizochi ndi a
  • Osayesa kugwiritsa ntchito chowongolera ichi, ngati chawonongeka.
  • Chipangizochi chimagwiritsidwa ntchito m'nyumba basi, kugwiritsa ntchito mankhwalawa panja sikumachotsa zitsimikizo zonse.
  • Munthawi yayitali yosagwiritsidwa ntchito, chotsani mphamvu yayikulu ya unit.
  • Nthawi zonse muyike gawoli muzinthu zotetezeka komanso zokhazikika.
  • Zingwe zopangira mphamvu ziyenera kuyendetsedwa kuti zisamayende bwino kapena kukanikizidwa ndi zinthu zomwe zayikidwapo kapena zotsutsana nazo, ndikuwonetsetsa kwambiri komwe akutuluka.
  • Kutentha - Chowongoleracho chiyenera kukhala kutali ndi magwero otentha monga ma radiator, zolembera zotenthetsera, masitovu, kapena zida zina (kuphatikiza ampLifiers) zomwe zimatulutsa kutentha.
  • Woyang'anira ayenera kuthandizidwa ndi ogwira ntchito oyenerera pamene:
    A. Chingwe chopangira magetsi kapena pulagi yawonongeka.
    B. Zinthu zagwa, kapena madzi atayikira mu chowongolera.
    C. Wowongolera wakumana ndi mvula kapena madzi.
    D. Woyang'anira sakuwoneka kuti akugwira ntchito bwino kapena akuwonetsa kusintha kodziwika bwino.
    E. Wowongolera wagwa ndipo/kapena wagwa monyanyira

Ulamuliro ndi Ntchito

FOS 414803 DMX Operator Controller yokhala ndi 192 Channels - Controls

  1. ZOCHITA MATANI - Amagwiritsidwa ntchito posankha zilizonse kapena zonse za 12. Izi ndizomwe zimasankha mayendedwe a DMX omwe amapita kumakonzedwe.
    Onani ma adilesi patsamba 9 kuti mumve zambiri
  2. MABUTANI A SCENE - Amagwiritsidwa ntchito kusunga Ma Scenes mu pulogalamu yamapulogalamu kapena kusewereranso zochitika zanu mumasewera
  3. Chiwonetsero cha LCD - Imawonetsa zikhalidwe ndi zosintha kutengera ntchito yosankhidwa.
  4. MABUTANI A BANK (FOS 414803 DMX Operator Controller yokhala ndi 192 Channels - chithunzi 1ORFOS 414803 DMX Operator Controller yokhala ndi 192 Channels - chithunzi 2)- Sankhani Bank yomwe mukufuna kugwiritsa ntchito. (pali mabanki 30 osankhidwa onse.)
  5. CHASE - Amagwiritsidwa ntchito posankha zothamangitsa (1-6).
  6. PROGRAM - Amagwiritsidwa ntchito poyambitsa pulogalamu. Chiwonetsero chimathwanima chikayatsidwa.
  7. MIDI / REC - Amagwiritsidwa ntchito kuwongolera magwiridwe antchito a MIDI kapena Kujambulitsa sitepe iliyonse ya Zochitika ndi Kuthamangitsa.
  8. AUTO/DEL- Sankhani liwiro la AUTO pothamangitsa kapena Zithunzi Zochotsedwa kapena kuthamangitsa.
  9. AUDIO / BANK COPY- Amagwiritsidwa ntchito kuyambitsa kuyatsa kwamawu mu Chase mode kapena kukopera zithunzi kuchokera ku banki kupita kwina mu Program Mode.
  10. BLACKOUT - Imayimitsa kapena kuyatsa zotulutsa zonse zamakanema.
  11. TIP SYNC / ONE - Mu Auto Chase mode yomwe imagwiritsidwa ntchito kusintha kuchuluka kwa kuthamangitsa. Amagwiritsidwanso ntchito kusintha LCD Display mu Manual Chase.
  12. ZINTHA TIME SLIDER - Amagwiritsidwa ntchito posintha FADE TIME. Fade Time ndi nthawi yomwe imatengera DMX Operator kuti asinthe kuchokera pachithunzi china kupita ku china.
    Za example; ngati slider ya nthawi yazimiririka yakhazikitsidwa ku 0 (zero) kusintha kwa zochitika kudzakhala pompopompo. Ngati slider yakhazikitsidwa ku '30s' zidzatengera DMX Operator masekondi 30 kuti amalize kusintha kuchokera pachithunzi china kupita china.
  13. SPEED SLIDER - Amagwiritsidwa ntchito kusintha liwiro la kuthamanga mu Auto Mode.
  14. TSAMBA LOSANKHA - Amagwiritsidwa ntchito kusintha pakati pa mabanki a TSAMBA A (1-8) & PAGE B (9-16).
  15. ZOPHUNZITSA (1-8) - Amagwiritsidwa ntchito kusintha tchanelo/makhalidwe kuchokera ku 0% mpaka 100%.

Zolumikizira Zam'mbuyo

FOS 414803 DMX Operator Controller yokhala ndi 192 Channels - Controls 2

16. MIDI IN - Imalandila data ya MIDI.
17. DMX OUT - Amagwiritsidwa ntchito kutumiza chizindikiro cha DMX kumakonzedwe kapena Packs.
18. USB INTERFACE - USB INTERFACE iyi ili ndi ntchito zitatu:

  • Lumikizani USB LED lamp, yokhala ndi mphamvu ya MAX ya 500mA (Kuwala Sikuphatikizidwa).
  • Lumikizani ndodo ya USB (osaphatikizidwe) ndikusunga zosintha zonse zowongolera (kuthamangitsa / mawonekedwe / zoikamo zina). Mutha kusunga 12 files (zosintha 1-12).
    Chonde onani tsamba 16 la malangizo osunga zobwezeretsera.
  • Lumikizanani ndi ndodo ya USB (yosaphatikizidwa) kuti mukweze firmware yatsopano yowongolera.
    ZINDIKIRANI: Chonde funsani thandizo lamakasitomala la ADJ kuti mumve zambiri.

19. DC INPUT - Imavomereza DC 9 ~ 12V, 300 mA osachepera, magetsi.

DMX Address

ZOTHANDIZA ZOTHANDIZA
Kuti mukhale ndi chiwongolero cha munthu aliyense payekhapayekha ndi Woyendetsa DMX, ma adilesi okonzekera ayenera kuyankhidwa motere.
Kusintha batani # 1 kumayambira pa 1
Kusintha batani # 2 kumayambira pa 17
Kusintha batani # 3 kumayambira pa 33
Kusintha batani # 4 kumayambira pa 49
Kusintha batani # 5 kumayambira pa 65
Kusintha batani # 6 kumayambira pa 81
Kusintha batani # 7 kumayambira pa 97
Kusintha batani # 8 kumayambira pa 113
Kusintha batani # 9 kumayambira pa 129
Kusintha batani # 10 kumayambira pa 145
Kusintha batani # 11 kumayambira pa 161
Kusintha batani # 12 kumayambira pa 177

Mawonekedwe a Mapulogalamu

  1. PITIRIZANI NDIKUGWIRITSA BWINO LA PROGRAM (6) kwa masekondi atatu (3) kuti mutsegule pulogalamu. LCD DISPLAY (3) iwonetsa kuti wowongolera ali m'mawonekedwe a pulogalamu powonetsa kuwala kopitilira muyeso pafupi ndi 'PROG.
  2. Sankhani kachipangizo ka pulogalamuyi podina MABUTANI ALIYENSE kapena onse ZOTHANDIZA 1 MPAKA 12 (1).
  3. Sinthani ma fader ku zosintha zomwe mukufuna (mwachitsanzo, Mtundu, Gobo, Pan, Mapendekedwe, Kuthamanga, ndi zina), posintha ma fader kuchokera pa 0-255. Gwiritsani ntchito BUTONI TSAMBA A, B (14) ngati makina anu ali ndi ma tchanelo opitilira asanu ndi atatu. Mukasintha kuchokera pa Tsamba A kupita ku B, muyenera kusuntha ma fader kuti mutsegule tchanelo.
  4. Zokonda zikapangidwa, dinani BUTONI ZOTHANDIZA (1) kuti muyimitse kusintha kwake. Dinani BUTANI LINA LAKE (1) kuti musankhe chosintha china choti musinthe. Sinthani zosintha zingapo nthawi imodzi posankha MABUTONI OTHANDIZA angapo (1) nthawi imodzi.
  5. Bwerezani masitepe 2 ndi 3 mpaka zosintha zonse zitatha.
  6. Zochitika zonse zikakhazikitsidwa, dinani ndikutulutsa MIDI / REC BUTTON (7).
  7. Dinani BATANI 1-8 (2) kuti musunge chochitikachi. Ma LED ONSE BLINK 3 TIMES ndipo LCD idzawonetsa banki ndi malo omwe malowo adasungidwa.
  8. Bwerezani masitepe 2-8 kuti mulembe zochitika 8 zoyambirira.
    Mutha kukopera zosintha kuchokera pa batani lokonzekera kupita ku lina ngati mukufuna kuwonjezera magetsi kuwonetsero yanu. Ingodinani ndikugwirizira batani losintha lomwe mukufuna kukopera kenako dinani batani losintha lomwe mukufuna kukopera.
  9. Gwiritsani ntchito mabatani a UP ndi DOWN BANK (4) kuti mujambule mabanki ambiri azithunzi. Pali mabanki okwana 30 omwe mungathe kusunga mpaka zithunzi 8 kubanki pazithunzi zonse za 240.
  10. Kuti mutuluke mu Program Mode dinani ndikugwirizira BUTONI LA ​​PROGRAM (6) kwa masekondi atatu. Mukatuluka pa Program Mode LED ya Blackout imayatsidwa, kuti muyimitse mdima akanikizire BUTONI YA BLACKOUT (10).

Kusintha Zithunzi

SCENE KOPI:
Ntchitoyi imakupatsani mwayi wokopera zosintha zachiwonetsero chimodzi kupita ku china.

  1. Dinani BUTONI LA ​​PROGRAM (6) kwa masekondi atatu kuti mutsegule Mawonekedwe a Pulogalamu. LCD DISPLAY (3) iwonetsa Mawonekedwe a Pulogalamu mwa kuwonetsa kadontho kophethira kosalekeza pafupi ndi "PROG".
  2. Gwiritsani ntchito mabatani a UP and DOWN BANK (4) kuti mupeze banki/malo omwe mukufuna kukopera.
  3. Dinani BUTONI LA ​​SCENE (2), lomwe lili ndi zomwe mukufuna kukopera.
  4. Gwiritsani ntchito mabatani a UP and DOWN BANK (4) kuti musankhe banki yomwe mukufuna kutengeranso zomwe zachitika.
  5. Dinani BUTONI LA ​​MIDI / REC (7) ndikutsatiridwa ndi BUTONI LA ​​SCENE (2) lomwe mukufuna kukopera.

KUSINTHA KWA PAMENE:
Ntchitoyi imakupatsani mwayi wosintha mawonekedwe pambuyo pokonzedwa.

  1. Dinani BUTONI LA ​​PROGRAM (6) kwa masekondi atatu kuti mutsegule Mawonekedwe a Pulogalamu.
    LCD DISPLAY (3) iwonetsa Mawonekedwe a Pulogalamu mwa kuwonetsa kadontho kophethira kosalekeza pafupi ndi "PROG".
  2. Gwiritsirani ntchito mabatani a UP AND DOWN BANK (4) kuti musankhe banki/chiwonetsero chomwe mukufuna kusintha.
  3. Sankhani zomwe mukufuna kusintha podina BATTON YAKE YA M'MENE (2).
  4. Gwiritsani ntchito FADERS (15) kuti musinthe zomwe mukufuna.
  5. Mukasintha, dinani MIDI / REC BUTTON (7) ndikutsatiridwa ndi SCENE BUTTON (2) yomwe ikugwirizana ndi zomwe mukusintha zomwe zidzasunga zomwe zasinthidwa.
    Chidziwitso: Onetsetsani kuti mwasankha zomwe zasankhidwa mu gawo 4, apo ayi mutha kujambula mwangozi pazomwe zilipo.

Bwezerani ZONSE ZONSE:
Ntchitoyi ichotsa zochitika zonse mu Mabanki onse. (Makanema ONSE azithunzi zonse amasinthidwa kukhala 0.

  1. Dinani ndikugwira batani la PROGRAM (6)
  2. Pamene mukugwira BATTON YA PROGRAM (6), dinani ndikugwira BANK DOWN BUTTON (4).
  3. Chotsani mphamvu kuchokera kwa wowongolera ndikumasula mabatani.
  4. Lumikizaninso mphamvu kwa wowongolera, ndipo zithunzi zonse ziyenera kufufutidwa.

KOPI BANK OF SENES:
Ntchitoyi imakopera zosintha za banki imodzi kupita ku ina.

  1. Dinani BUTONI LA ​​PROGRAM (6) kwa masekondi atatu kuti mutsegule Mawonekedwe a Pulogalamu. LCD DISPLAY (3) iwonetsa Mawonekedwe a Pulogalamu mwa kuwonetsa kadontho kophethira kosalekeza pafupi ndi "PROG".
  2. Sankhani BANK BUTTON (4) yomwe mukufuna kukopera
  3. Dinani ndikutulutsa MIDI/REC BUTTON (7)
  4. Sankhani BANK BUTTON (4) yomwe mukufuna kujambula.
  5. Press AUDIO/BANK COPY BUTTON (9), ndipo LCD DISPLAY (3) iwunikira mwachidule kusonyeza kuti ntchitoyo yatha.

FUTA BANK YA ZOCHITIKA:

  1. Dinani BUTONI LA ​​PROGRAM (6) kwa masekondi atatu kuti mutsegule Mawonekedwe a Pulogalamu. LCD DISPLAY (3) iwonetsa Mawonekedwe a Pulogalamu mwa kuwonetsa kadontho kophethira kosalekeza pafupi ndi "PROG".
  2. Sankhani BANK BUTONI (4) mukufuna kuchotsa
  3. Dinani ndikugwira BUTONI AUTO/DEL (8).
  4. Pamene mukugwira BUTTON (8) ya AUTO/DEL (9) dinani ndikugwira BUTONI YA AUDIO/BANK COPY (XNUMX) nthawi yomweyo.
  5. Tulutsani mabatani onse awiri nthawi imodzi, ndipo LCD DISPLAY (3) iyenera kuwunikira kwakanthawi kusonyeza kuti ntchitoyo yatha.

FUTA CHIMO:
Ntchitoyi idzakhazikitsanso ma Channels onse a DMX mu SCENE imodzi kubwerera ku 0.

  1. Mukukanikiza ndi kugwira BUTONI YA AUTO/DEL (8), Dinani ndi kumasula BUTONI LA ​​PAMENE (2) 1-8 lomwe mukufuna kuchotsa.

Kuthamangitsa Mapulogalamu / Kusintha

ZOCHITA ZINTHU:
ZINDIKIRANI: MUYENERA KUKONZA ZOCHITIKA ZOCHITIKA MUSANAKHOZA KUTHA MALO.

  1. Dinani BUTONI LA ​​PROGRAM (6) kwa masekondi atatu kuti mutsegule Mawonekedwe a Pulogalamu.
    LCD DISPLAY (3) iwonetsa Mawonekedwe a Pulogalamu mwa kuwonetsa kadontho kophethira kosalekeza pafupi ndi "PROG".
  2. Sankhani CHASE BUTONI 1 MPAKA 6 (5) kuti mukonze.
  3. Sankhani BUTONI LA ​​SCENE (2) lomwe mukufuna kuchokera ku banki iliyonse yomwe idajambulidwa kale.
  4. Dinani BUTONI LA ​​MIDI/REC (7) ndipo ma LED onse azithwanima katatu
  5. Bwerezani masitepe 3 & 4 nthawi zambiri momwe mungafunire. Mutha kusunga mpaka masitepe 240 pakuthamangitsa kumodzi.
  6. Kuti mutuluke pa Program Mode, dinani BUTONI LA ​​PROGRAM (6) kwa masekondi atatu. LCD DISPLAY (3) idzawonetsa Mawonekedwe a Blackout mwa kusonyeza kadontho kakuthwanima kofulumira pafupi ndi "Blackout". Mutha kusewereranso Recorded Chase. (Onani tsamba 15-16)

KUSINTHA CHASE
LOWANI CHOCHITA:

  1. Dinani BUTONI LA ​​PROGRAM (6) kwa masekondi atatu kuti mutsegule Mawonekedwe a Pulogalamu.
    LCD DISPLAY (3) iwonetsa Mawonekedwe a Pulogalamu powonetsa kuwala kosalekeza kowunikira pafupi ndi "PROG".
  2. Sankhani CHASE BUTONI 1 MPAKA 6 (5) ngati mukufuna kuwonjezera sitepe.
  3. Dinani ndikutulutsa TAP SYNC/DISPLAY BUTTON (11), ndipo LCD DISPLAY tsopano iwonetsa sitepe yomwe mulimo.
  4. Mukasankha TAP SYNC/DISPLAY BUTTON (11) gwiritsani ntchito MIBADWO YAKUMWAMBA NDI PASI kuti musunthe pamanja kupita ku STEP yomwe mukufuna kuyikapo pang'ono.
  5. Dinani MIDI/REC BUTTON (7) LCD DISPLAY iwonetsa nambala imodzi pamwamba.
  6. Dinani batani la Scene lomwe mukufuna kuyika.
  7. Dinani MIDI/REC BUTTON (7) kachiwiri kuti muyike sitepe yatsopano.
  8. Dinani ndikutulutsa TAP SYNC/DISPLAY BUTTON (11) kuti mubwerere kuntchito yake yabwino.

FUFUTA CHOCHITA:

  1. Dinani BUTONI LA ​​PROGRAM (6) kwa masekondi atatu kuti mutsegule Mawonekedwe a Pulogalamu.
    LCD DISPLAY (3) iwonetsa Mawonekedwe a Pulogalamu powonetsa kuwala kosalekeza kowunikira pafupi ndi "PROG".
  2. Sankhani CHASE BUTONI 1 MPAKA 6 (5) yomwe ili ndi sitepe yomwe mukufuna kuchotsa.
  3. Dinani ndikutulutsa TAP SYNC/DISPLAY BUTTON (11).
  4. Mukasankha TAP SYNC/SONYEZA BUTTON (11) gwiritsani ntchito Mmwamba ndi PASI MABUTONI kuti musunthe pamanja kupita komwe mukufuna kuchotsa.
  5. Mukafika pa sitepe yomwe mukufuna kuchotsa, dinani ndikumasula BUTONI LAUTO/DEL (8).

FUFUTSANI KUTHATHA KWAMBIRI:

  1. Dinani BUTONI LA ​​PROGRAM (6) kwa masekondi atatu kuti mutsegule Mawonekedwe a Pulogalamu.
    LCD DISPLAY (3) iwonetsa Mawonekedwe a Pulogalamu powonetsa kuwala kosalekeza kowunikira pafupi ndi "PROG".
  2. Dinani ndikugwira BUTONI YA AUTO/DEL (8).
  3. Pamene mukugwira BUTONI AUTO/DEL (8) dinani CHASE BATTON 1 MPAKA 6 yomwe mukufuna kuchotsa, kawiri. Kuthamangitsa kuyenera kuchotsedwa.

FUTA ZINTHU ZONSE:
Ntchitoyi ikuthandizani kuti muchotse kukumbukira zonse zothamangitsa (chotsani zothamangitsa zonse).

  1. Dinani ndikugwira AUTO/DEL (8) & BANK DOWN BUTTONS (4).
  2. Pamene mukugwira AUTO/DEL (8) & BANK DOWN BUTTONS (4) kulumikiza mphamvu.
  3. Kugwira AUTO/DEL (8) & BANK DOWN BUTTONS (4) kulumikizanso mphamvu kwa masekondi 3 Kuwala kwa LED kukumbukira zonse zothamangitsa ziyenera kuchotsedwa.

Masewera Osewera & Kuthamangitsa

ZOCHITIKA ZONSE:

  1. Mphamvu ikayatsidwa koyamba, gawoli limakhala mu Manual Scene Mode.
  2. Onetsetsani kuti AUTO & AUDIO BUTTON LED'S (8 & 9) ndizozimitsa.
  3. Sankhani BANK BUTTON (4) yomwe mukufuna kugwiritsa ntchito MABUTANI A M'MWAMBA NDI PASI PA BANK (4), omwe amasunga zomwe mukufuna kuchita.
  4. Dinani BUTONI LA ​​SCENE (2) kuti mutsegule zomwe mwasankha.

MANUAL RUN CHASES:
Ntchitoyi ikulolani kuti mudutse pamanja pazithunzi zonse mu Chase iliyonse.

  1. Dinani BUTONI LA ​​PROGRAM (6) kwa masekondi atatu kuti mutsegule Mawonekedwe a Pulogalamu. LCD DISPLAY (3) idzawonetsa Mawonekedwe a Pulogalamu mwa kusonyeza kadontho kophethira kopitirizabe pafupi ndi 'PROG.'
  2. Kuthamangitsani posankha CHASE BATTON 1 MPAKA 6 (5).
  3. Dinani TAP SYNC BUTTON (11).
  4. Gwiritsani ntchito BANK BUTTONS (4) kuti mufufuze pothamangitsa.
    Zindikirani: LCD DISPLAY iwonetsa kuchuluka kwa sitepe mu Chase osati Scene bank/nambala.

ZOCHITIKA ZONSE:
Ntchitoyi idzayendetsa banki yazithunzi zokonzedwa motsatizana.

  1. Dinani BUTONI AUTO/DEL (8) kuti mutsegule Auto Mode. Kuwala konyezimira mu LCD DISPLAY (3) kudzawonetsa Auto Mode.
  2. Gwiritsani ntchito mabatani a UP ndi DOWN BANK (4), kuti musankhe banki yazithunzi kuti mugwiritse ntchito.
  3. Mukasankha banki yazithunzi zomwe mukufuna kuthamanga, mutha kugwiritsa ntchito mawonekedwe a SPEED (13) ndi FADE (12) kuti musinthe zomwe zikuchitika.
    Zindikirani: Mutha kusintha mabanki, kuti muthane ndi zochitika zosiyanasiyana, nthawi iliyonse ndikukanikiza MIBADWO YAKUMWAMBA NDI KUSINTHA BANK (4).
    Zindikirani: Mukamasintha nthawi ya Fade musamachedwepo kuposa Speed ​​​​setting kapena mawonekedwe anu sangamalizidwe sitepe yatsopano isanatumizidwe.

AUTO RUN CHASES:

  1. Sankhani kuthamangitsa komwe mukufuna ndikudina MABUTANI aliwonse kapena onse asanu ndi limodzi a CHASE (5).
  2. Press ndi kumasula AUTO/DEL BUTTON (8).
  3. LED yofananira idzawunikira mu LCD DISPLAY (3) kuwonetsa Auto mode ikugwira ntchito.
  4. Sinthani nthawi za SPEED (13) ndi FADE (12) pazokonda zomwe mukufuna.
  5. Kuthamangitsa tsopano kumayenda molingana ndi liwiro lanu lokhazikika ndi nthawi yozimiririka.
    Zindikirani: Mutha kupitilira liwirolo podina TAP SYNC / DISPLAY BUTTON (11) katatu, kuthamangitsa kumathamanga molingana ndi nthawi yomwe mumapopera.
    Zindikirani: pamene Kusintha kwa nthawi yozimitsa sikukupangitsa kuti ikhale yochedwa kuposa Speed ​​setting kapena zithunzi zanu sizidzatha sitepe yatsopano isanatumizidwe.
    Zindikirani: Ngati mukufuna kuphatikiza ma Chases onse dinani BUTTON AUTO/DEL (8) musanasankhe Chase.

THENGA ZINTHU ZOPHUNZITSA ZOKHUDZA:

  1. Dinani BUTONI LA ​​AUIDO/BANK COPY (9) kuti muyatse nyali yofananira ndi LCD DISPLAY (3).
  2. Sankhani banki yomwe ili ndi zithunzi zomwe mukufuna kuthamangitsa pogwiritsa ntchito MABWINO Okwera kapena PASI (4), mutha kugwiritsanso ntchito chowongolera cha MIDI kusintha mawonekedwe (onani ntchito ya MIDI).
  3. Dinani BUTONI LA ​​AUDIO/BANK COPY (9) kuti mutuluke.

THAWANI MALO OGWIRITSIRA NTCHITO YOPHUNZITSA:

  1. Sankhani kuthamangitsa komwe mukufuna ndikudina imodzi mwa mabatani asanu ndi limodzi a CHASE (5).
  2. Dinani ndikutulutsa BUTONI LA ​​AUDIO/BANK COPY (9).
  3. LED yofananira idzawunikira mu LCD DISPLAY (3) ikuwonetsa kuti Audio mode ikugwira ntchito.
  4. Chase tsopano ayamba kumveka.

SINTHA KUCHITIKA KWA ZINTHU:

  1. Dinani BUTONI LA ​​AUIDO/BANK COPY (9) kuti muyatse nyali yofananira ndi LCD DISPLAY (3).
  2. Dinani ndikugwira BUTONI YA AUIDO/BANK COPY (9) ndikugwiritsa ntchito BANK UP/POWN BUTTONS (4) kuti musinthe kamvekedwe ka mawu.

Sungani Data / Kwezani Data / Firmware Kusintha Pogwiritsa Ntchito Ndodo ya USB

ZINDIKIRANI: Ndodo ya USB Iyenera KUKHALA KUKHALA FAT32 KAPENA FAT 16 BWINO KWA DATA YA USB:

  1. Ikani ndodo yanu ya USB mu mawonekedwe akumbuyo a USB. Dinani ndi kugwira BUTONI YA AUTO/DEL (8), ndikudina BANK UP BATTON (4).
  2. Chiwonetsero cha LCD (3) chidzawonetsa "PULUMENI".
  3. Dinani BUTONI LOTHANDIZA (1) (zosintha 1-12), kuti musunge zosintha zonse zachikhazikitsocho ku USB drive. Mutha kusungitsa zochulukirapo mpaka 12 files.
  4. Mukamaliza kuthandizira zoikamo zomwe mukufuna, mutha kusamutsa files ku kompyuta ngati zosunga zobwezeretsera.

KUONA BWINO LANU FILES PA KOMPYUTA:

  1. Lowetsani ndodo ya USB ndi chosungira chanu files mu kompyuta. Tsegulani chikwatu cholembedwa "DMX _OPERATOR". Ntchito yanu files idzawonetsedwa ngati "FileX". "X" ikuyimira 1 mwa 12 mawonekedwe files.

ULWANI DATA YA USB:

  1. Ikani ndodo yanu ya USB mu mawonekedwe akumbuyo a USB. Dinani ndi kugwira BUTONI YA AUTO/DEL (8), ndikudina BANK DOWN BUTTON (4).
  2. Chiwonetsero cha LED (3) chidzawonetsa "LOAD".
  3. Ma LED a FIXTURE BUTTON omwe adasungidwa pa ndodo ya USB tsopano akuwala.
  4. Dinani BUTONI LOKANIZA (1) lofananira lomwe mukufuna kuyikanso makonda omwewo. Mukakanikiza BUTONI ZOSAVUTA, zokonda zosunga zobwezeretsera tsopano zidzatsegulidwa ku BUTONI LOKHALITSA.

KUSINTHA KWA FIRMWARE:
Tsatirani malangizo osavuta awa kuti musinthe firmware ya controller.

  1. Yatsani chowongolera.
  2. Lumikizani USB drive yogwirizana ndi FAT 16 kapena FAT 32 ku kompyuta yomwe yatsitsa pulogalamu yatsopano ya DMX Operator.
    Tsegulani USB drive pakompyuta ndikupanga chikwatu chotchedwa "DMX_OPERATOR".
    Onjezani zosintha za firmware zomwe zidatsitsidwa file ku chikwatu "DMX_OPERATOR".
  3. Chotsani bwino USB pagalimoto pa kompyuta.
  4. Lowetsani choyendetsa cha USB mu mawonekedwe akumbuyo a USB pa chowongolera.
  5. Dinani ndikugwira MABUTONI A ZOKHUDZA 1, ZOTHANDIZA 2 (1), ndi SCENE 3 BATTON (2) ndipo pokanikiza mabataniwa, yambani PA chowongolera.
  6. Pambuyo pa masekondi a 3, chiwonetsero cha LED chiyenera kusonyeza "UPFR". Izi zikawonetsedwa, masulani MABUTONI OTHANDIZA 1, ZOTHANDIZA 2 (1) ndi BWINO LACHI3 (2).
  7. Mukamasula MABUTONI OTHANDIZA (1) ndi SCENE 3 BUTTON (2), dinani batani lina lililonse pa wowongolera kuti muyike firmware yatsopano. file kwa DMX Operator.

Ntchito ya MIDI

Kuti muyambitse ntchito ya MIDI:

  1. Dinani ndikugwira MIDI/REC BUTTON (7) kwa masekondi atatu, ndipo manambala awiri omaliza a LCD DISPLAY (3) adza BLINK kusonyeza MIDI Mode.
  2. Gwiritsani ntchito mabatani a Mmwamba NDI PASI (4) kuti musankhe MIDI Channel 1 MPAKA 16 yomwe mukufuna kuyiyambitsa.
  3. Dinani ndikugwira MIDI/REC BUTTON (7) kwa masekondi atatu, kuti mutuluke.

KUKHALA KWA MIDI CHANNEL

BANK (Octave)  ZINDIKIRANI NUMBER NTCHITO
BANK 1   00 KWA 07 1 mpaka 8 ya Bank 1  kuyatsa kapena kutsitsa
BANK 2   08 KWA 15 1 mpaka 8 ya Bank 1  kuyatsa kapena kutsitsa
BANK 3   16 KWA 23 1 mpaka 8 ya Bank 1  kuyatsa kapena kutsitsa
BANK 4   24 KWA 31 1 mpaka 8 ya Bank 1  kuyatsa kapena kutsitsa
BANK 5   32 KWA 39 1 mpaka 8 ya Bank 1  kuyatsa kapena kutsitsa
BANK 6   40 KWA 47 1 mpaka 8 ya Bank 6  kuyatsa kapena kutsitsa
BANK 7   48 KWA 55 1 mpaka 8 ya Bank 7  kuyatsa kapena kutsitsa
BANK 8   56 KWA 63 1 mpaka 8 ya Bank 8  kuyatsa kapena kutsitsa
BANK 9   64 KWA 71 1 mpaka 8 ya Bank 9  kuyatsa kapena kutsitsa
BANK 10   72 MPAKA 79 1 mpaka 8 ya Bank10 kuyatsa kapena kutsitsa
BANK 11   80 MPAKA 87 1 mpaka 8 ya Bank11 kuyatsa kapena kutsitsa
BANK 12   88 MPAKA 95 1 mpaka 8 ya Bank12 kuyatsa kapena kutsitsa
BANK 13   96 MPAKA 103 1 mpaka 8 ya Bank13 kuyatsa kapena kutsitsa
BANK 14   104 MPAKA 111 1 mpaka 8 ya Bank14 kuyatsa kapena kutsitsa
BANK 15   112 MPAKA 119 1 mpaka 8 ya Bank14 kuyatsa kapena kutsitsa
ZOTHAWITSA   120 MPAKA 125 1 mpaka 6 Kuthamangitsa kuyatsa kapena kutsitsa

BLACKOUT
DMX OPERATOR imangolandira zolemba za MIDI ndipo mungafunike kusintha kiyibodi yanu kuti mupeze zolemba zoyenera.

Kusaka zolakwika

Pansipa pali zovuta zingapo zomwe wogwiritsa ntchito angakumane nazo, ndi mayankho.
Unit samayankha ndikasuntha ma faders

  • Onetsetsani kuti adilesi ndiyolondola.
  • Onetsetsani kuti liwiro lasinthidwa, ngati likupezeka, kuti musunthe mwachangu. Sikuti Ma Fixtures onse ali ndi liwiro losintha.
  • Ngati chingwe chonse cha XLR ndichoposa mapazi 90 onetsetsani kuti chatha bwino.

Zithunzi sizimasewera nditatha kuzijambula

  • Onetsetsani kuti mwadina MIDI/RECORD BUTTON, musanakanize BUTONI WA SCENE.
    Ma LED amayenera kuphethira akakanikiza BUTONI WOYENERA WA SCENE.
  • Onetsetsani kuti muli mu Bank yolondola yomwe ili ndi zithunzi.

Zithunzi sizimasewera bwino monga momwe ndidazijambulira

  • Kodi Fade Time ikufuna Kuthamanga kwasankhidwa?
  • Onetsetsani kuti muli mu Bank yolondola yomwe ili ndi zithunzi.
  • Ngati chingwe chonse cha XLR ndichoposa mapazi 90 onetsetsani kuti chatha bwino.

Kuthamangitsa sikumasewera ndikatha kujambula

  • Onetsetsani kuti mwadina BATTON YA MIDI/RECORD, mutakanikiza BUTONI LA ​​SCENE. Ma LED amayenera kuphethira akakanikiza MIDI/RECORD BUTTON.
  • Onetsetsani kuti muli mu Chase yolondola yomwe ili ndi masitepe ojambulidwa.
  • Ngati ili mu Auto Mode, Kodi Imasankhidwa Pawonetsero? Kodi mwasintha Speed ​​​​mutasankha Auto?
  • Kodi Fade Time ikufuna Kuthamanga Kwambiri?
  • Ngati chingwe chonse cha XLR ndichoposa mapazi 90 onetsetsani kuti chatha bwino.

Zofotokozera

Wothandizira wa DMX

 Kulowetsa DC: 9V - 12VDC, 500mA Min.
Kulemera kwake: 5 lbs./ 2.25 Maf.
Makulidwe: 5.25” (L) x 19” (W) x 2.5” (H) 133.35 x 482.6 x 63.5mm
Chitsimikizo: Zaka 2 (masiku 730)

Chonde dziwani: Mfundo ndi kusintha kwa kamangidwe ka gawoli ndi bukhuli zikhoza kusintha popanda chidziwitso cholembedwa.

Zolemba / Zothandizira

FOS 414803 DMX Operator Controller yokhala ndi 192 Channels [pdf] Buku Logwiritsa Ntchito
414803, DMX Operator Controller with 192 Channels, 414803 DMX, Operator Controller with 192 Channels, 414803 DMX Operator Controller with 192 Channels

Maumboni

Zolemba Zogwirizana

Siyani ndemanga

Imelo yanu sisindikizidwa. Minda yofunikira yalembedwa *