Litaba
pata
ERC 213 Digital Controller bakeng sa Sehatsetsing
Litlhaloso
- Mohlala: ERC 213
- Mosebetsi: Selaoli sa dijithale bakeng sa sehatsetsi le defrost ka li-relay tse 3
- Litekanyo: 61.2mm x 83mm x 66mm
- Mounting: Ho kenya ka morao ka senotlolo le likoto
- Lihokelo tsa Motlakase: DI1, DI2, Sair, S5, DO1, DO2, DO3, GND
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho kenya
- Sebelisa thempleite ea ho cheka e fanoeng ho tšoaea libaka tse holisang.
- Beha ka mokhoa o sireletsehileng selaoli sa dijithale sa ERC 213 u sebelisa sistimi e ka morao e nang le likoto.
Litekanyo (mm) le Ho phahamisa
Lihokelo tsa Motlakase
ERC 213 ke sehatsetsi se bohlale, se nang le merero e mengata se nang le taolo ea mocheso le defrost, se fumanehang ka li-relay tse 3.
Selaoli se etselitsoe ho phethahatsa litlhoko tsa kajeno tsa likopo tsa sehatsetsi sa khoebo.
Lintlha-khōlō Tsa Theknoloji
- Ts'ebeliso e bonolo: Likonopo tse 'ne, sebopeho se bonolo sa menyu, tharollo ea ts'ebeliso e kentsoeng pele e netefatsa ts'ebeliso e holimo.
- Ho kenya habonolo:
Phello e Phahameng 16 Relay e nolofalletsa khokahanyo e tobileng ea meroalo e boima ntle le tšebeliso ea li-relay tse mahareng: ho fihla ho li-compressor tsa 2 hp ho latela matla a eona le matla a motlakase (e kholo ho feta 0.65 bakeng sa 230 V le e kholo ho feta 0.85 bakeng sa 115 V).
Mefuta e mengata e fapaneng e tsamaellanang ea li-sensor le li-terminals tsa ho hokela li-screw li netefatsa hore ho kengoa ho bonolo haholo. - Tšireletso ea yuniti: Likarolo tse khethehileng tsa software joalo ka ts'ireletso ea compressor hore e se fetoe ke phepelo ea motlakase kapa mochesong o phahameng oa condensing e netefatsa ts'ebetso e bolokehileng ea yuniti.
- Matla a matla: Defrost ha e batloa, mokhoa oa mots'eare/bosiu le taolo e bohlale ea li-evaporator fan li netefatsa hore matla a sebetsa hantle.
Mosebelisi
| Mosebetsi oa Bohlokoa | |
 |
Tobetsa 'me u hatelle ho matlafatsa: FACTORY RESET (“FAC” e bontšitsoe) |
 |
Tobetsa motsotsoana o le mong: KHUTLANG Tobetsa o hatelle: PULL-TOWN |
 |
Tobetsa motsotsoana o le mong: TEMPERATURE SETPOINT/OK Tobetsa o hatelle: MENU |
 |
Tobetsa motsotsoana o le mong: UP Tobetsa o hatelle: ON/OFF |
 |
Tobetsa motsotsoana o le mong: TLASE Tobetsa o hatelle: DEFROST |
Tlhophiso e Potlakileng ho Power Up
- MOHATO 1: Matlafatsa
- MOHATO 2: Khetha menu e potlakileng ea litlhophiso
Ka mor'a metsotsoana e 30 ea matla, tobetsa "<" BACK bakeng sa metsotsoana e 3.
Phetoho e kholo "r12" e setiloe ka bo eona ho TIMA. - MOHATO 3: Khetha sesebelisoa se kentsoeng pele "o61"
Pontšo e bontša ka bo eona paramethara ea khetho ea ts'ebeliso "o61". Tobetsa SET ho khetha sesebelisoa se kentsoeng esale pele. Pontšo e bonts'a boleng ba kamehla (mohlala, "AP0" flashing). Khetha mofuta oa sesebelisoa ka ho tobetsa UP/TOWN ebe o tobetsa SET ho netefatsa. Molaoli o beha litekanyetso tsa parametha esale pele ho latela ts'ebeliso e khethiloeng mme ha a pate liparamente tse amehang. Keletso: o ka tloha ho AP0 ho ea ho AP6 habonolo, 'me kahoo u khethe lethathamo le nolofalitsoeng la litlhophiso, ka ho tobetsa konopo ea UP (lenane le chitja).
- MOHATO 4: Khetha mofuta oa sensor "o06"
Pontšo e bonts'a ka bo eona paramethara ea khetho ea sensor "o06". Tobetsa SET ho khetha mofuta oa sensor. Pontšo e bonts'a boleng ba kamehla (mohlala, "n10" flashing). Khetha mofuta oa kutlo ka ho tobetsa UP/TOWN (n5=NTC 5 K, n10=NTC 10 K, Ptc=PTC, Pt1=Pt1000) ebe o tobetsa SET ho netefatsa.
HLOKOMELA: Li-sensor tsohle li tlameha ho ba tsa mofuta o le mong.
Tlhophiso e potlakileng ka "cFg" Menu
- Tobetsa SET metsotsoana e meraro ho fihlella lihlopha tsa li-parameter.
- Khetha "CFg" menu ebe o tobetsa SET ho kenya. Ho hlaha menu ea pele "r12" (main switch).
- NYAMELA main switch (r12=0) bakeng sa ho fetola sesebelisoa se kentsoeng pele.
- Tobetsa UP/TOWN ho tsamaisetsa lethathamong la paramethara.
- Lokisa paramethara ea "o61" ho khetha sesebelisoa se kentsoeng esale pele
- Tobetsa SET ho fihlella paramente ea "o61".
- Tobetsa UP/TOWN ho khetha sesebelisoa (AP0= ha ho sesebelisoa se khethiloeng).
- Tobetsa SET ho netefatsa, "o61" e tla hlaha.
- Tsoela pele ho beha li-parameter tse latelang ("o06" sensor mofuta) ho "cFg" menu.
Ts'ebetso ea mantlha
Fetola mocheso oa setpoint
Qala ho defrost ka letsoho
Qala ho hula fatše
View alamo e sebetsang
Notlolla keyboard
- Ka mor'a metsotso e 5 ea ho se sebetse, letlapa la linotlolo le notletsoe (haeba P76=e).
- Ha keypad e notletsoe, tobetsa konopo efe kapa efe e bonts'a "LoC" skrineng.
- Tobetsa likonopo tsa UP le DOWN ka nako e le 'ngoe bakeng sa metsotsoana e 3 ho notlolla keyboard. "unl" e hlahisoa ka metsotsoana e 3.
Lintlha tsa Tekheniki
Tlhophiso e Feliloeng Pele
Lethathamo la Parameter
| Lebitso la Parameter - ERC 213 | Khoutu | Min | Max | Yuniti | App. 0 (Def.) | App. 1 | App. 2 | App. 3 | App. 4 | App. 5 | App. 6 |
| Tlhophiso | cFg | ||||||||||
| Phetoho e kholo -1=tshebeletso, 0=TLOHA, 1=ON |
r12 | -1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |
| Lisebelisoa tse boletsoeng esale pele AP0, AP1, AP2, AP3, AP4, AP5, AP6 |
o61 | AP0 | AP6 | AP0 | AP1 | AP2 | AP3 | AP4 | AP5 | AP6 | |
| Khetho ea mofuta oa sensor n5=NTC 5 K, n10=NTC 10 K, Ptc=PTC, Pt1=Pt1000 |
o06 |
n5 |
P1 |
n10 |
n10 |
n10 |
n10 |
n10 |
n10 |
n10 |
|
| Reference/thermostat | r- | ||||||||||
| Sebaka sa mocheso | r00 | -100.0 | 200.0 | C / F. | 2.0 | 4.0 | 2.0 | -24.0 | 2.0 | -24.0 | 2.0 |
| Phapang | r01 | 0.1 | 20.0 | K | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 |
| Meeli e fokolang ea lintlha | r02 | -100.0 | 200.0 | C / F. | -35.0 | 2.0 | 0.0 | -26.0 | 0.0 | -26.0 | -35.0 |
| Tekanyo e phahameng ea lintlha | r03 | -100.0 | 200.0 | C / F. | 50.0 | 6.0 | 4.0 | -20.0 | 4.0 | -20.0 | 50.0 |
| Hlahisa offset (boleng ba ho lokisa mocheso oa pontšo) |
r04 | -10.0 | 10.0 | K | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 |
| Sesebelisoa sa Pontšo (°C/°F) | r05 | -C | -F | -C | -C | -C | -C | -C | -C | -C | |
| Ho lekanya Sair (ho fokotsa mocheso oa moea) |
r09 | -20.0 | 20.0 | K | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | - |
| Phetoho e kholo -1=tshebeletso, 0=TLOHA, 1=ON |
r12 | -1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | - | |
| Ho khutlisa bosiu (mocheso o fokotsehileng nakong ea bosiu) | r13 | -50.0 | 50.0 | K | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 |
| Thermostat reference displacement (offset thempereichara) | r40 | -50.0 | 50.0 | K | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | - |
| Nako ea ho hula | r96 | 0 | 960 | min | 0 | 0 | 0 | 0 | 0 | 0 | - |
| Mocheso oa mocheso oa ho theola fatše | r97 | -100.0 | 200.0 | C / F. | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 | - |
| Tlhokomeliso: liparamente tse patiloeng li tlositsoe | |||||||||||
| Lebitso la Parameter - ERC 213 | Khoutu | Min | Max | Yuniti | App. 0 (Def.) | App. 1 | App. 2 | App. 3 | App. 4 | App. 5 | App. 6 |
| Alamo | A– | ||||||||||
| Ho lieha ha alamo ea mocheso nakong ea maemo a tloaelehileng | A03 | 0 | 240 | min | 30 | 45 | 30 | 30 | 30 | 30 | 30 |
| Ho lieha bakeng sa alamo ea mocheso nakong ea ho hula-tlasa/ho qala-ho-ea-qhoa/ho qhibiliha | A12 | 0 | 240 | min | 60 | 90 | 60 | 60 | 60 | 60 | 60 |
| Tekanyo ea alamo e phahameng ea mocheso (Khabinete/Kamore) | A13 | -100.0 | 200.0 | C / F. | 8.0 | 10.0 | 8.0 | -15.0 | 8.0 | -15.0 | 8.0 |
| Moeli o tlase oa mocheso oa mocheso | A14 | -100.0 | 200.0 | C / F. | -30.0 | 0.0 | -2.0 | -30.0 | -2.0 | -30.0 | -30.0 |
| DI1 tieho(tieho ea nako bakeng sa ts'ebetso e khethiloeng ea DI1) | A27 | 0 | 240 | min | 30 | 30 | 30 | 30 | 30 | 30 | 30 |
| DI2 tieho(tieho ea nako bakeng sa ts'ebetso e khethiloeng ea DI2) | A28 | 0 | 240 | min | 30 | 30 | 30 | 30 | 30 | 30 | 30 |
| Tekanyetso ea alamo e phahameng ea Condenser | A37 | 0 | 200 | C / F. | 80 | 80 | 80 | 80 | 80 | 80 | - |
| Condenser high block limit | A54 | 0 | 200 | C / F. | 85 | 85 | 85 | 85 | 85 | 85 | - |
| Moqtage tshireletso thusa | A72 | che | EE | che | che | che | che | che | che | che | |
| Bonyane ba ho khaoha ka matlatage | A73 | 0 | 270 | V | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Bonyane ba sehiloeng matlatage | A74 | 0 | 270 | V | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Boholo voltage | A75 | 0 | 270 | V | 270 | 270 | 270 | 270 | 270 | 270 | 270 |
| Kheloha | D- | ||||||||||
| Mokgwa wa ho qhibidisa no=ha ho defrost, nAt=tlhaho, EL=motlakase, gas=gase e chesang | d01 | che | GAS | EL | nAt | EL | EL | EL | EL | EL | |
| Defrost setopong mocheso | d02 | 0.0 | 50.0 | C / F. | 6.0 | - | - | - | 6.0 | 6.0 | 6.0 |
| Karohano ea defrost | d03 | 0 | 240 | lihora | 8 | 6 | 8 | 12 | 8 | 12 | 8 |
| Nako ea ho qeta nako e telele | d04 | 0 | 480 | min | 30 | 45 | 15 | 15 | 30 | 30 | 30 |
| Ho lieha ha defrost ho matla a holimo (kapa lets'oao la DI) | d05 | 0 | 240.0 | min | 0 | 0 | 0 | 0 | 0 | 0 | - |
| Ho lieha ho rotha | d06 | 0 | 60 | min | 0 | 0 | 0 | 0 | 0 | 0 | 5 |
| Fene e lieha ka mor'a ho qhibiliha | d07 | 0 | 60 | min | 0 | 0 | 0 | 0 | 0 | 0 | 5 |
| Fene e qala mocheso ka mor'a ho qhibiliha | d08 | -50.0 | 0.0 | C / F. | -5.0 | - | - | - | -5.0 | -5.0 | - |
| Fan nakong ea defrost | d09 | TLOA | on | on | on | on | on | on | on | on | |
| Tlhokomeliso: liparamente tse patiloeng li tlositsoe | |||||||||||
| Lebitso la Parameter - ERC 213 | Khoutu | Min | Max | Yuniti | App. 0 (Def.) | App. 1 | App. 2 | App. 3 | App. 4 | App. 5 | App. 6 |
| Tlhophiso ea sensor ea ho emisa e se = nako, Moea=Moea (mocheso oa moea), dEF=S5 (sensor ea defrost) | d10 | eseng | dEF | eseng | eseng | eseng | eseng | dEF | dEF | eseng | |
| Compressor e bokelletse nako ea ho sebetsa ho qala ho qhibiliha, 0=OFF | d18 | 0 | 96 | lihora | 0 | 0 | 0 | 0 | 0 | 0 | - |
| Defrost ka tlhokahalo20.0=OFF | d19 | 0.0 | 20.0 | K | 20.0 | - | - | - | 20.0 | 20.0 | - |
| Ho lieha ha serame ka mor'a ho hula0=OFF | d30 | 0 | 960 | min | 0 | 0 | 0 | 0 | 0 | 0 | - |
| Fane taolo | F– | ||||||||||
| Feti ho cutout ea compressor FFc=fate e latela sekontiri, FAo=fane e BULETSE kamehla,FPL= fene e otlang | F01 | FFc | FPL | FAo | FAo | FAo | FAo | FAo | FAo | FAo | |
| Fene emisa evaporator mocheso50.0=OFF | F04 | -50.0 | 50.0 | C / F. | 50.0 | - | - | - | 50.0 | 50.0 | - |
| Fan ON potoloho | F07 | 0 | 15 | min | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Fan OFF potoloho | F08 | 0 | 15.0 | min | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Sekontiri | c– | ||||||||||
| Compressor bonyane KA nako | C01 | 0 | 30 | min | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Compressor bonyane OFF nako | C02 | 0 | 30 | min | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Compressor OFF tieho monyako o butsoe | C04 | 0 | 15 | min | 0 | 0 | 0 | 0 | 0 | 0 | 1 |
| Khetho ea ho tšela lefela | C70 | che | EE | EE | EE | EE | EE | EE | EE | EE | |
| Tlhokomeliso: liparamente tse patiloeng li tlositsoe | |||||||||||
| Lebitso la Parameter - ERC 213 | Khoutu | Min | Max | Yuniti | App. 0 (Def.) | App. 1 | App. 2 | App. 3 | App. 4 | App. 5 | App. 6 |
| Ba bang | o– | ||||||||||
| Ho lieha ha tlhahiso ho ile ha qala | o01 | 0 | 600 | min | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
| DI1 configuration off=ha e sebedise, Sdc=pontsho ya boemo, doo=alamo ya lemati e qala hape, doA=alamo ya lemati ntle le ho qalella, SCH=main switch, nig=motsheare/ bosiu, rFd=reference displacement, EAL=alamo ya kantle, dEF=defrost, Pud=hulela fatshe, Sc= | o02 | TLOA | Sc | TLOA | TLOA | TLOA | TLOA | TLOA | TLOA | TLOA | |
| Aterese ea serial | o03 | 0 | 247 | 0 | 0 | 0 | 0 | 0 | 0 | - | |
| Password | o05 | che | 999 | che | che | che | che | che | che | che | |
| Khetho ea mofuta oa sensor n5=NTC 5 K, n10=NTC 10 K, Ptc=PTC, Pt1=Pt1000 | o06 | n5 | P1 | n10 | n10 | n10 | n10 | n10 | n10 | - | |
| Pontšo resolution 0.1=mehato ea 0.1 °C 0.5=mehato ea 0.5 °C, 1.0=mehato ea 1.0 °C | o15 | 0.1 | 1.0 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | |
| Relay counter 1 (1 count=100 cycles of operation) | o23 | 0 | 999 | 0 | 0 | 0 | 0 | 0 | 0 | - | |
| Relay counter 2 (1 count=100 cycles of operation) | o24 | 0 | 999 | 0 | 0 | 0 | 0 | 0 | 0 | - | |
| Relay counter 3 (1 count=100 cycles of operation) | o25 | 0 | 999 | 0 | 0 | 0 | 0 | 0 | 0 | - | |
| DI2 configuration off=ha e sebedise, Sdc=pontsho ya boemo, doo=alamo ya lemati e qala hape, doA=alamo ya lemati ntle le ho qalella, SCH=main switch, nig=mokgwa wa motshehare/bosiu, rFd=reference displacement, EAL=alamo ya kantle, dEF=defrost, Pud= hula fatshe | o37 | TLOA | Pud | TLOA | TLOA | TLOA | TLOA | TLOA | TLOA | TLOA | |
| Lisebelisoa tse boletsoeng esale pele | o61 | AP0 | AP6 | AP0 | AP1 | AP2 | AP3 | AP4 | AP5 | - | |
| Tlhokomeliso: liparamente tse patiloeng li tlositsoe | |||||||||||
| Lebitso la Parameter - ERC 213 | Khoutu | Min | Max | Yuniti | App. 0 (Def.) | App. 1 | App. 2 | App. 3 | App. 4 | App. 5 | App. 6 |
| Boloka litlhophiso joalo ka fektheri TLHOKOMELISO: Litlhophiso tsa pele tsa feme li felile |
o67 | che | EE | che | che | che | che | che | che | - | |
| DO2 config dEF=defrost, ALA=alamo | o71 | dEF | ALA | dEF | ALA | dEF | dEF | dEF | dEF | dEF | |
| Pontsho ka defrost Air=thempereichara ya nnete ya moya, FrE=thempereichara, -d-=”-d-” e bontshitswe | o91 | Moea | -d- | -d- | -d- | -d- | -d- | -d- | -d- | -d- | |
| Polarity | P– | ||||||||||
| DI1 input polarity nc=hangata e kwetswe, haho=ka tlwaelo e bulehile | P73 | nc | che | che | che | che | che | che | che | che | |
| DI2 input polarity nc=hangata e kwetswe, haho=ka tlwaelo e bulehile | P74 | nc | che | che | che | che | che | che | che | che | |
| Fetolela alamo e fetisetsoang0=e tloahelehileng, 1=ketso ea ho khelosa | P75 | 0 | 1 | 0 | 0 | - | - | - | - | - | |
| Senotlolo sa keyboard se bulela | P76 | che | EE | che | che | che | che | che | che | - | |
| Tse baloang | u- | ||||||||||
| Controller StatusS0=ho tsidifala HO BUTSWE/Ho futhumala,S2=emela hore compressor HA nako e fete, S3=emela hore compressor OFF nako e fete- nako ya ho qala hape, S4=rotha tieho ka mora ho fifala, S10=setopo sa ho phodisa S11=ho tsidifala ho emisitswe ke thermostat/heating OFF, S5 state OFF, S4=14 state=14 defrost, S17=lemati le butswe (DI input), S20=phodiso ya tshohanyetso, S25=taolo ya dipoelo ka bowena, S30=continuous cycle/Ho hulela fatshe,S32=tieho ya diphetho ha motlakase o nyoloha. | u00 | S0 | S32 | - | |||||||
| Mocheso oa moea (Sair) | u01 | -100.0 | 200.0 | C / F. | - | ||||||
| Bala tšupiso ea hajoale ea melaoana | u02 | -100.0 | 200.0 | C / F. | - | ||||||
| Thempereichara ea defrost (S5) | u09 | -100.0 | 200.0 | C / F. | - | - | - | - | |||
| Tlhokomeliso: liparamente tse patiloeng li tlositsoe | |||||||||||
| Lebitso la Parameter - ERC 213 | Khoutu | Min | Max | Yuniti | App. 0 (Def.) | App. 1 | App. 2 | App. 3 | App. 4 | App. 5 | App. 6 |
| Tlhahiso ea DI1 | u10 | TLOA | on | - | |||||||
| Boemo ba ho sebetsa bosiu | u13 | TLOA | on | - | |||||||
| Tlhahiso ea DI2 | u37 | TLOA | on | - | |||||||
| Thempereichara ea Condenser (Sc) | U09 | -100.0 | 200.0 | C / F. | - | ||||||
| Boemo ba relay ea Compressor | u58 | TLOA | on | - | |||||||
| Boemo ba ho fetisa | u59 | TLOA | on | - | |||||||
| Defrost relay boemo | u60 | TLOA | on | - | |||||||
| Boemo ba relay e khanyang | u63 | TLOA | on | - | |||||||
| Phetolelo ea mofuta oa firmware | u80 | 000 | 999 | - | |||||||
| Boemo ba alamo | |||||||||||
| Phoso ea sensor ea mocheso oa moea oa Sair | E29 | ||||||||||
| Phoso ea sensor ea S5 defrost | E27 | ||||||||||
| Phoso ea sensor ea Sc | E30 | ||||||||||
| Alamo ea mocheso o phahameng | A01 | ||||||||||
| Alamo ea mocheso o tlase | A02 | ||||||||||
| Vol e phahamengtagalamo | A99 | ||||||||||
| Vol e tlasetagalamo | AA1 | ||||||||||
| Alamo ea Condenser | A61 | ||||||||||
| Alamo ea monyako | A04 | ||||||||||
| Alamo e emeng | A45 | ||||||||||
| DI alamo ea kantle | A15 | ||||||||||
| Tlhokomeliso: liparamente tse patiloeng li tlositsoe | |||||||||||
Melao ea Tšireletso
Sheba hore na phallo e ngata hakaetage e nepahetse pele o hokela seletsa.
U se ke ua pepesa metsi kapa mongobo: sebelisa molaoli feela ka har'a meeli ea ts'ebetso ho qoba ho fetoha ha mocheso ka tšohanyetso ka mongobo o phahameng oa sepakapaka ho thibela ho thehoa ha condensation.
Ho lahloa ha Sehlahisoa
Sesebelisoa (kapa sehlahisoa) se tlameha ho lahloa ho latela molao oa lehae oa tsamaiso ea litšila.
Ngoliso ea Moqapi oa EU
002566703-0001
Danfoss e ke ke ea amohela boikarabello bakeng sa liphoso tse ka bang teng libukeng tsa libuka, libukana le lintho tse ling tse hatisitsoeng. Danfoss e na le tokelo ea ho fetola lihlahisoa tsa eona ntle le tsebiso. Sena se sebetsa le ho lihlahisoa tse seng li ntse li le teng ka taelo ha feela liphetoho tse joalo li ka etsoa ntle le hore ho be le liphetoho tse ling tse hlokahalang ho lintlha tse seng li lumellane. Matšoao ohle a khoebo a thepa ena ke thepa ea lik'hamphani tse amehang. Danfoss le Danfoss logotype ke matshwao a kgwebo a Danfoss A/S. Litokelo tsohle li sirelelitsoe.
KoolCode App
Khoasolla KoolCode App lebenkeleng la hau la lisebelisoa. Tse ling tse ngata ho tsoa ho molaoli oa hau oa ERC!
Hlakola khoutu ena ho tseba haholoanyane ka paramente ea ERC 213
Khoasolla lihlooho tsa ERC 21X www.danfoss.com/erc
© Danfoss | DCS (az) | 2016.04
Lipotso Tse Botsoang Hangata
- P: Ke etsa joang ho tsosolosa molaoli ho litlhophiso tsa fektheri?
A: Tobetsa 'me u tšoare konopo e boletsoeng nakong ea ho matlafatsa ho etsa reset ea fektheri. Latela litaelo tse skrineng bakeng sa netefatso. - P: Ke lokela ho etsa eng haeba ke kopana le aekhone e sebetsang ea alamo ho pontšo?
A: Sheba buka ea mosebedisi bakeng sa tlhahisoleseding mabapi le dialamo tsa ho rarolla mathata. Ho ka 'na ha hlokahala hore u nke liketso tse itseng ho latela alamo e bontšitsoeng.
Litokomane / Lisebelisoa
 |
ERC ERC 213 Digital Controller bakeng sa Sehatsetsing [pdf] Tlhophiso Tataiso ERC 213, ERC 213 Digital Controller for Refrigeration, Digital Controller for Refrigeration, Controller for Refrigeration, Refrigeration |
