EMERSON EXD-HP1 2 Controller ka ModBus Communication Capability
Tlhahisoleseding ya Sehlahiswa
Litlhaloso
- Phepelo ea motlakase: AC 24V
- Tšebeliso ea matla: EXD-HP1: 15VA, EXD-HP2: 20VA
- Sehokelo sa plug-in: Li-terminals tse ntshuwang tsa terata tsa boholo ba terata 0.14…1.5 mm2
- Sehlopha sa tšireletso: IP20
- Litlhahiso tsa dijithale: Mabitso a ka bang teng mahala (mahala ho voltage)
- Lisensara tsa mocheso: ECP-P30
- Li-sensor tsa khatello: PT5N
- Phetisetso ea alamo: SPDT ikopanye le 24V AC 1 Amp mojaro oa inductive; 24V AC/DC 4 Amp mojaro o hanyetsanang
- Tlhahiso ea koloi ea Stepper: Khoeli: EXM-125/EXL-125 kapa EXN-125 Li-valve: EXM/EXL-… kapa EXN-…
- Mofuta oa ts'ebetso: 1B
- E lekantsoe tšusumetso voltage: 0.5kV
- Tekanyo ea Tšilafalo: 2
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho phahamisa
Selaoli sa EXD-HP1/2 se ka behoa holim'a seporo se tloaelehileng sa DIN. Netefatsa hore molaoli o na le lithapo tsa lithapo tsa mantlha kapa matsoho a tšireletso a tšepe ha o hokela lithapo. Ha o hokela likhoele tsa li-valve tsa EXM/EXL kapa EXN, latela likhoutu tsa mebala joalo ka ha ho thathamisitsoe ka tlase:
| Theminale | EXM/L-125 mmala oa terata | EXN-125 mmala oa terata |
|---|---|---|
| EXD-HP1 | Brown | Khubedu |
| 6 | Boputsoa | Boputsoa |
| 7 | namunu | namunu |
| 8 | Bosehla | Bosehla |
| 9 | Bosoeu | Bosoeu |
| 10 | – | – |
| EXD-HP2 | Brown | Khubedu |
| 30 | Boputsoa | Boputsoa |
| 31 | namunu | namunu |
| 32 | Bosehla | Bosehla |
| 33 | Bosoeu | Bosoeu |
| 34 | – | – |
Khokahano le Puisano
Haeba puisano ea Modbus e sa sebelisoe, hoa hlokahala ho theha li-interfaces pakeng tsa molaoli oa EXD-HP1/2 le molaoli oa tsamaiso ea boemo bo holimo. Kenyelletso ea kantle ea dijithale e tlameha ho sebetsoa ho compressor/tlhokeho ea sistimi ea ts'ebetso. Etsa bonnete ba hore ho na le mehato e hlokahalang ho sireletsa tsamaiso.
Maemo a Tshebetso
Boemo ba ho kenya ka dijithale bakeng sa compressor bo tjena:
- Compressor e qala / e sebetsa: e koetsoe (Qala)
- Compressor e emisa: bula (Emisa)
Hlokomela:
Ho hokela lisebelisoa life kapa life tsa EXD-HP1/2 ho phallo ea voltage tla senya EXD-HP1/2 ka ho sa feleng.
Khokelo ea Motlakase le Wiring
Ha u kopanya motlakase le lithapo, latela litaelo tsena:
- Sebelisa transformer ea sehlopha sa II bakeng sa phepelo ea motlakase ea 24VAC.
- Se ke oa theola mela ea 24VAC.
- Ho khothalletsoa ho sebelisa li-transformer ka bomong bakeng sa molaoli oa EXD-HP1/2 le balaoli ba mokha oa boraro ho qoba tšitiso e ka bang teng kapa mathata a motheo phepelong ea motlakase.
- Hlakola terata e ka bang 7 mm qetellong.
- Kenya lithapo ka har'a boloko ba theminale 'me u tiise li-screw ka mokhoa o sireletsehileng.
- Netefatsa hore lithapo li hoketsoe hantle 'me ha ho na likhokahano tse hlephileng.
Sesebelisoa sa Pontšo/Linotlolo (Li-LED le Mesebetsi ea Likonopo)
Sesebelisoa sa ponts'o / keypad sa molaoli oa EXD-HP1/2 se na le matšoao a latelang a LED le mesebetsi ea konopo:
- BULELA: Pontšo ea data
- BULELA: alamo
- BULELA: ModBus
- Potoloho ea 1
FAQ (Lipotso Tse Botsoang Hangata)
- P: Na molaoli oa EXD-HP1/2 a ka sebelisoa ka lihatsetsi tse tukang?
A: Che, molaoli oa EXD-HP1/2 o na le mohloli o ka bang teng oa ho tima 'me ha a tsamaise litlhoko tsa ATEX. E lokela ho kenngoa feela sebakeng se sa phatlohang. Bakeng sa lihatsetsi tse tukang, sebelisa li-valve le lisebelisoa tse amohelehang bakeng sa likopo tse joalo. - P: Ke lokela ho lahla molaoli oa EXD-HP1/2 joang hang ha e fihla qetellong ea bophelo ba eona?
A: Taolo ea EXD-HP1/2 ha ea lokela ho lahloa e le litšila tsa khoebo. Ke boikarabello ba mosebedisi ho e fetisetsa sebakeng se kgethilweng sa pokello bakeng sa ho sebediswa hape ho bolokehileng ha Disebediswa tsa Motlakase le tsa Elektroniki (taelo ya WEEE 2019/19/EU). Ho fumana lintlha tse ling, ikopanye le setsi sa heno sa tikoloho ea tikoloho.
Lintlha tse akaretsang
EXD-HP1/2 ke li-control tse ikemetseng tsa mocheso o phahameng haholo le kapa li-economizer. EXD-HP1 e reretsoe ho sebetsa ha valve e le 'ngoe ea EXM/EXL kapa EXN athe EXD-HP2 e etselitsoe ho sebetsa ha li-valve tse peli tse ikemetseng tsa EXM/EXL kapa tse peli tsa EXN.
Hlokomela:
Hoa khoneha ho sebelisa Circuit 1 feela ho tloha EXD-HP2. Tabeng ena, potoloho ea 2 e tlameha ho holofala (C2 parameter) le li-sensor le valve bakeng sa potoloho ea bobeli ha li hlokehe.
Puisano ea ModBus e hlalositsoe ho Tech Bulletin mme ha e akaretsoe ke tokomane ena.
Lintlha tsa Tekheniki
| Phepelo ea motlakase | 24VAC / DC ± 10%; 1A |
| Tšebeliso ea matla | EXD-HP1: 15VA EXD-HP2: 20VA |
| Sehokedi sa plug-in | Li-terminal tsa screw tse ka tlosoang boholo ba terata 0.14. 1.5 limilimithara2 |
| Sehlopha sa tšireletso | IP20 |
| Lisebelisoa tsa Dijithale | Mabitso a ka bang teng mahala (mahala ho voltage) |
| Li-sensor tsa mocheso | ECP-P30 |
| Li-sensor tsa khatello | PT5N |
| Mocheso o sebetsang/o potolohileng. | 0…+55°C |
| Phetiso ea alamo e tsoang | SPDT ikopanye le 24V AC 1 Amp mojaro oa inductive; 24V AC/DC 4 Amp mojaro o hanyetsanang |
| E kentsoe/matlafalitsoe: | Nakong ea ts'ebetso e tloaelehileng (ha ho boemo ba alamo) |
| E emisitsoe/e feletsoe ke matla: | Nakong ea boemo ba alamo kapa phepelo ea motlakase e TIMA |
| Sehlahisoa sa mochini oa stepper | Coil: EXM-125/EXL-125 kapa EXN-125
Li-valve: EXM/EXL-… kapa EXN-… |
| Mofuta wa ketso | 1B |
| E lekantsoe tšusumetso voltage | 0.5kV |
| Tekanyo ea Tšilafalo | 2 |
| Ho hlongoa: | Bakeng sa terene e tloaelehileng ea DIN |
| Ho tshwaya | |
| Boholo (mm)
|
|
Tlhokomeliso - Lihatsetsi tse tukang:
EXD-HP1/2 e na le mohloli o ka bang teng oa ho tima 'me ha e tsamaellane le litlhoko tsa ATEX. Ho kenya feela libakeng tse sa phatlohang. Bakeng sa lihatsetsi tse tukang feela sebelisa li-valve le lisebelisoa tse amohelehang bakeng sa eona!
Litaelo tsa polokeho
- Bala litaelo tsa ts'ebetso ka botlalo. Ho hloleha ho latela ho ka baka ho hloleha ha sesebelisoa, ts'enyo ea sistimi kapa kotsi ea motho.
- E reretsoe ho sebelisoa ke batho ba nang le tsebo le tsebo e nepahetseng.
- Pele ho instola kapa tšebeletso hakolla kaofela voltages ho tsoa ho sistimi le sesebelisoa.
- Se ke oa sebelisa sistimi pele likhokahano tsohle tsa cable li phethoa.
- U se ke ua sebelisa voltage ho molaoli pele ho phethoa ha wiring.
- Likhokahanyo tsohle tsa motlakase li tlameha ho latela melaoana ea lehae.
- Maikutlo ha a arohantsoe, likhokahano tse ka bang teng mahala li hloka ho sebelisoa.
- Ho lahla: Matlakala a motlakase le elektroniki HA A TLAMEHA ho lahlwa le ditshila tse ding tsa kgwebo. Ho e-na le hoo, ke boikarabello ba mosebedisi ho e fetisetsa sebakeng se kgethilweng sa pokello bakeng sa ho sebediswa hape ho bolokehileng ha Thepa ya Waste Electrical and Electronic Equipment (taelo ya WEEE 2019/19/EU). Ho fumana lintlha tse ling, ikopanye le setsi sa heno sa tikoloho ea tikoloho.
Khokahano ea motlakase le likhoele
- Sheba setšoantšo sa lithapo tsa motlakase bakeng sa likhokahano tsa motlakase.
- Hlokomela: Boloka lithapo tsa motlakase le li-sensor li arohane hantle le likhoele tsa phepelo ea motlakase. Bonyane sebaka se khothaletsoang ke 30mm.
- Likhoele tsa EXM-125, EXL-125 kapa EXN-125 li fanoa ka thapo e tsitsitseng le block ea terminal ea JST qetellong ea mohala. Seha lithapo haufi le boloko ba theminale. Tlosa mohatsela oa terata hoo e ka bang 7 mm qetellong. Ho kgothaletswa hore lithapo li qetelle li be le lisebelisoa tsa lithapo tsa mantlha kapa sleeve ea tšepe e sireletsang. Ha o hokela lithapo tsa EXM/EXL kapa EXN, nahana ka likhoutu tsa mebala ka tsela e latelang:
EXD Theminale EXM/L-125 mmala oa terata EXN-125 mmala oa terata EXD-HP1 6 BR 7 BL
8 KAPA
9 EE
10 WH
Brown Blue Orange Yellow White
Red Blue Orange Yellow White
EXD-HP2 30 BR 31 BL
32 KAPA
33 YE
34 WH
Bosootho bo Boputsoa ba Orange bo Bosoeu bo Bosehla Botala bo Bofubelu ba Orange Bosoeu bo Bosehla - Motlakase oa digital DI1 (EXD-HP1) le DI1/D12 (EXD-HP1/2) ke li-interfaces pakeng tsa EXD-HP1/2 le molaoli oa tsamaiso ea boemo bo holimo haeba puisano ea Modbus e sa sebelisoa. Dijithale tsa kantle di tla sebetswa ho kompressor/tlhokeho ya sistimi ya tshebetso.
- Haeba li-relay tsa tlhahiso li sa sebelisoe, mosebelisi o tlameha ho netefatsa hore ho na le mehato e nepahetseng ea ts'ireletso ho sireletsa sistimi.
| Boemo ba ts'ebetso | Boemo ba ho kenya dijithale |
| Compressor e qala/tsamaya | e koetsoe (Qala) |
| Compressor e emisa | bula (Emisa) |
Hlokomela:
Ho hokela lisebelisoa life kapa life tsa EXD-HP1/2 ho phallo ea voltage tla senya EXD-HP1/2 ka ho sa feleng.
Boto ea motheo ea likhoele (EXD-HP 1/2):
Hlokomela:
- Boto ea motheo ke ea mosebetsi oa taolo ea mocheso o phahameng kapa taolo ea Economizer.
- Relay ea alamo, ho kopana ho omileng. Coil ea relay ha e matlafatsoe nakong ea maemo a alamo kapa ho tima.
- Kenyelletso ea sensor ea khase e chesang e tlameha feela bakeng sa ts'ebetso ea taolo ea economizer.
Tlhokomeliso:
Sebelisa transformer ea sehlopha sa II bakeng sa phepelo ea motlakase ea 24VAC. Se ke oa theola mela ea 24VAC. Re khothaletsa ho sebelisa li-transformer ka bomong bakeng sa molaoli oa EXD-HP1/2 le balaoli ba mekhatlo ea boraro ho qoba tšitiso e ka bang teng kapa mathata a motheo phepelong ea motlakase.
Wiring: Boto e ka holimo (EXD- HP 2):
Hlokomela:
- Boto e ka holimo ke feela bakeng sa mosebetsi oa ho laola mocheso o moholo.
- Boto e ka holimo ha e hloke ho kenngoa ka mohala haeba potoloho ea 2 e holofetse.
Tokisetso ea ho Qala
- Hlakola potoloho eohle ea sehatsetsing.
- Tlhokomeliso: Li-valve tsa Taolo ea Motlakase EXM/EXL kapa EXN li tlisoa sebakeng se bulehileng hanyenyane. U se ke ua lefella tsamaiso ka sehatsetsing pele ho koaloa ha valve.
- Sebelisa phepelo voltage 24V ho ea ho EXD-HP1/2 ha tlhahiso ea dijithale (DI1/DI2) e TIMA(e butsoe). Valve e tla khannoa sebakeng se haufi.
- Kamora ho koaloa ha valve, qala ho tjhaja sistimi ka sehatsetsing.
Ho theha li-parameter
(e hloka ho hlahlojoa / ho fetoloa pele ho qala)
- Etsa bonnete ba hore tlhahiso ea dijithale (DI1/DI2) e koetsoe (e butsoe). Bulela phepelo ea motlakase.
- Mekhahlelo e mene ea mantlha Password (H5), mofuta oa ts'ebetso (1uE), mofuta oa sehatsetsi (1u0/2u0) le mofuta oa sensor ea khatello (1uP/2uP) li ka hlophisoa ha feela tlhahiso ea dijithale DI1/DI2 e timme (e butsoe) ha phepelo ea motlakase e ntse e sebetsa. e ON (24V). Karolo ena ke ea polokeho e eketsehileng ho thibela tšenyo e sa lebelloang ho li-compressor le likarolo tse ling tsa sistimi.
- Hang ha liparamente tse kholo li se li khethiloe / li bolokiloe EXD-HP1/2 e se e loketse ho qala. Li-parameter tse ling kaofela li ka fetoloa ka nako efe kapa efe nakong ea ts'ebetso kapa standby haeba ho hlokahala.
Pontsho/dikonopo yuniti
Pontšo/dikonopo (disebediswa tsa LED le dikonopo)
Mokhoa oa ho fetola parameter:
Litekanyetso li ka fumaneha ka konopo ea likonopo tse 4. Mekhahlelo ea tlhophiso e sirelelitsoe ke password ea linomoro. Lekunutu la kamehla ke "12". Ho khetha tlhophiso ea paramente:
- Tobetsa ea
konopo bakeng sa metsotsoana e fetang 5, Ho tla hlaha "0" e benyang - Tobetsa
ho fihlela "12" e hlahisoa; (password) - Tobetsa
ho netefatsa phasewete - Tobetsa or
ho bonts'a khoutu ea parameter e tlamehang ho fetoloa - Tobetsa ho hlahisa boleng bo khethiloeng ba parameter
- Tobetsa or ho eketsa kapa ho fokotsa boleng
- Tobetsa ho netefatsa boleng bo bocha ka nakoana le ho bonts'a khoutu ea eona
- Pheta mokhoa ona ho tloha qalong "tobetsa or ho bontša…”
Ho tsoa le ho boloka litlhophiso tse ncha:
- Tobetsa ho netefatsa litekanyetso tse ncha le ho tsoa ts'ebetsong ea ho fetola liparamente.
Ho tsoa ntle le ho fetola / ho boloka liparamente:
- Se ke oa tobetsa konopo efe kapa efe bonyane metsotsoana e 60 (TIME OUT).
Khutlisetsa li-parameter tsohle ho litlhophiso tsa fektheri:
- Etsa bonnete ba hore tlhahiso ea dijithale (DI1/DI2) e Koetsoe (e butsoe).
- Tobetsa le hammoho bakeng sa metsotsoana e fetang 5.
- Ho hlaha "0" e benyang.
- Tobetsa or ho fihlela phasewete e hlaha (Factory setting = 12).
- Haeba password e fetotsoe, khetha password e ncha.
- Tobetsa ho netefatsa phasewete
- Litlhophiso tsa feme li sebelisoa
Hlokomela:
Ka mokhoa o tloaelehileng, mocheso oa sebele o bonts'oa ponts'o. Tabeng ea ente ea mokelikeli le mosebetsi oa economizer phetoho ena ho mocheso oa ho ntša metsi.
- Ho hlahisa lintlha tse ling tsa potoloho ea 1 ea EXD-HP1/2 kapa 2 ea EXD-HP2:
- Tobetsa le hammoho bakeng sa metsotsoana e 3 ho bonts'a data e tsoang ho Circuit 1
- Tobetsa le hammoho bakeng sa metsotsoana e 3 ho bonts'a data e tsoang ho Circuit 2
- Tobetsa
- Ho hlahisa lintlha tsa potoloho ka 'ngoe: Tobetsa konopo bakeng sa motsotsoana oa 1 ho fihlela nomoro ea index ho latela tafole e ka tlase e hlaha. Lokolla konopo mme data e latelang e feto-fetohang e tla hlaha. Ka ho pheta-pheta mokhoa o ka holimo, lintlha tse feto-fetohang li ka hlahisoa ka tatellano e kang Measured superheat (K) → Measured suction pressure (bar) → Sebaka sa valve (%) → Mocheso o lekantsoeng oa khase (°C) → Mocheso o lekantsoeng oa mocheso (°C) → Lekanya mocheso oa mocheso (°C) (haeba ho khethiloe tšebetso ea economizer) → HO PHETA….
| Lintlha tse feto-fetohang | Potoloho 1 (EXD-HP1/2) | Circuit 2 (EXD-HP2) |
| Superheat K | 1 0 | 2 0 |
| Suction pressure bar | 1 1 | 2 1 |
| Boemo ba valve % | 1 2 | 2 2 |
| Mocheso oa mocheso oa khase ea ho hula °C. | 1 3 | 2 3 |
| Mocheso oa mocheso. °C | 1 4 | 2 4 |
| Mocheso oa mocheso. °C | 1 5 | – |
Hlokomela
- Mocheso oa mocheso. e fumaneha ha feela mosebetsi oa economizer o khethiloe.
- Kamora metsotso e 30, ponts'o e khutlela ho index 0.
Ho seta alamo ka letsoho/ho hlakola lialamo tse sebetsang (ntle le liphoso tsa hardware):
Tobetsa le hammoho bakeng sa metsotsoana e 5. Ha ho hlakola ho phethiloe, molaetsa oa "CL" o hlaha metsotsoana e 2.
Ts'ebetso ea mokhoa oa matsoho
Tobetsa le hammoho bakeng sa metsotsoana e 5 ho fihlella ts'ebetso ea mokhoa oa matsoho.
Lenane la li-parameter ka tatellano ea ho tsamaea ka ho tobetsa konopo
| Khoutu | Tlhaloso le likhetho tsa parameter | Min | Max | Feme tlhophiso | Tšimo tlhophiso |
| 1Ho | Ts'ebetso ea mokhoa oa matsoho; potoloho 1 | 0 | 1 | 0 | |
| 0 = theoha; 1 = ka | |||||
| 1HP | Ho buloa ha valve (%) | 0 | 100 | 0 | |
| 2Ho | Ts'ebetso ea mokhoa oa matsoho; potoloho 2 | 0 | 1 | 0 | |
| 0 = theoha 1 = butle | |||||
| 2HP | Ho buloa ha valve (%) | 0 | 100 | 0 | |
Hlokomela:
Nakong ea ts'ebetso ea matsoho, li-alarms tse sebetsang joalo ka mocheso o tlase oa mocheso lia koaloa. Ho kgothaletswa ho shebella tshebetso ya tsamaiso ha molaoli a sebetsa ka letsoho. Ts'ebetso ea letsoho e reretsoe tšebeletso kapa ts'ebetso ea nakoana ea valve ka boemo bo itseng. Ka mor'a ho finyella ts'ebetso e hlokahalang, beha li-parameter 1Ho le 2Ho ho 0 kahoo molaoli o sebelisa li-valve ka ho toba ho ea ka li-setpoint (s) tsa eona.
Lethathamo la Liparamente
Lenane la li-parameter ka tatellano ea ho tsamaea ka ho tobetsa konopo:
| Khoutu | Tlhaloso le likhetho tsa parameter | Min | Max | Feme tlhophiso | ||
| H5 | Password | 1 | 1999 | 12 | ||
| Adr | Aterese ea ModBus | 1 | 127 | 1 | ||
| br | Modbus baudrate | 0 | 1 | 1 | ||
| SEAR | Parity ea Modbus | 0 | 1 | 0 | ||
| -C2 | Potoloho ea 2 ea EXD-HP2 e lumelletsoe | 0 | 1 | 0 | ||
| 0 = E nolofalitsoe; | 1 = E holofetse | |||||
| -uC | Phetoho ea likarolo | 0 | 1 | 0 | ||
| 0 = °C, K, bar; 1 = F, psig
Parameter ena e ama feela pontšo. Ka hare liyuniti li lula li thehiloe ho SI. |
||||||
| HP- | Mokhoa oa ho bonts'a | 0 | 2 | 1 | ||
| 0 = Ha ho pontšo | 1 = Potoloho ea 1 | 2 = Potoloho 2 (feela EXD-HP2) | ||||
| Parameters Potoloho 1 | ||||||
| 1uE | Mosebetsi | 0 | 1 | 1 | ||
| 0 = Taolo ea mocheso o phahameng
1 = Taolo ea Moruo (Feela bakeng sa R410A/R407C/R32) |
||||||
| 1u4 | Mokhoa oa ho laola mocheso o moholo | 0 | 4 | 0 | ||
| 0 = Ho laola mocheso oa mocheso oa li-coil 1 = Ho laola butle mocheso oa mocheso oa li-coil
2 = PID e tsitsitseng 3 = lebelo la ho laola mocheso oa poleiti (eseng bakeng sa 1uE = 1) 4 = Mocheso o tloaelehileng oa mocheso oa poleiti (eseng bakeng sa 1uE = 1) |
||||||
| 1u0 | Sehatsetsi | 0 | 15 | 2 | ||
| 0 = R22 1 = R134a 2 = R410A 3 = R32 4 = R407C
5 = R290* 6 = R448A 7 = R449A 8 = R452A 9 = R454A* 10 = R454B* 11 = R454C* 12 = R513A 13 = R452B* 14 = R1234ze* 15 = R1234yf * *) EXN ha e lumelloe *) Tlhokomeliso -Lihatsetsi tse tukang mollo: EXD-HP1/2 e na le mohloli o ka bang teng oa ho tima 'me ha e tsamaellane le litlhoko tsa ATEX. Ho kenya feela libakeng tse sa phatlohang. Bakeng sa lihatsetsi tse tukang feela sebelisa li-valve le lisebelisoa tse amohelehang bakeng sa eona! |
||||||
| 1uP | Mofuta oa sensor ea khatello e kentsoeng | 0 | 3 | 2 | ||
| 0 = PT5N-07…
2 = PT5N-30… |
1 = PT5N-18…
3 = PT5N-10P-FLR |
|||||
| 1uu | Ho bula valve ea ho qala (%) | 10 | 100 | 20 | ||
| 1u9 | Nako ea ho qala ea ho bula (ea bobeli) | 1 | 30 | 5 | ||
| 1uL | Mosebetsi o tlase oa alamo ea mocheso o phahameng haholo | 0 | 2 | 1 | ||
| 0 = tima (bakeng sa mouoane o nang le likhohola) 2 = nolofalletsa ho seta bocha ka letsoho | 1 = nolofalletsa ho seta botjha | |||||
| 1u5 | Superheat set-point (K)
Haeba 1uL = 1 kapa 2 (e nolofalitsoe ka koloi kapa ho seta ka letsoho) Haeba 1uL = 0 (e holofetse) |
3 0.5 |
30 30 |
6 6 |
||
| 1u2 | Mosebetsi oa MOP | 0 | 1 | 1 | ||
| 0 = tima | 1 = nolofalletsa | |||||
| 1u3 | MOP set-point (°C) saturation thempereichara Factory setting ho latela sehatsetsi se khethiloeng
(1u0). Boleng ba kamehla bo ka fetoloa |
sheba tafole ea MOP | ||||
| Khoutu | Tlhaloso le likhetho tsa parameter | Min | Max | Feme tlhophiso |
| 1P9 | Potoloho ea mode ea alamo e tlase 1 | 0 | 2 | 0 |
| 0 = e holofetse 1 = e nolofalitsoe ho seta botjha ka boits'oaro 2 = e nolofalitsoe ka letsoho | ||||
| 1PA | Potoloho ea ho khaola alamo e tlase ea khatello 1 | -0.8 | 17.7 | 0 |
| 1Pb | Alamo ea khatello e tlase ea ho lieha ho potoloha 1 | 5 | 199 | 5 |
| 1Pd | Alamo ea khatello e tlase ea potoloho ea 1 | 0.5 | 18 | 0.5 |
| 1P4 | Ho emisa ts'ebetso ea alamo ea tšireletso | 0 | 2 | 0 |
| 0 = e holofetse, 1 = e nolofalitsoe ho seta botjha ka boits'oaro, 2 = e nolofalitsoe ka letsoho | ||||
| 1P2 | Emisa potoloho e khaotsoeng ea alamo 1 | -20 | 5 | 0 |
| 1P5 | Ho lieha ha alamo ea tšireletso ea leqhoa, sec. | 5 | 199 | 30 |
| 1P- | Superheat control circuit 1 e tsitsitseng PID (Kp factor) Display 1/10K | 0.1 | 10 | 1.0 |
| 1 ke- | Superheat control circuit 1 e tsitsitseng PID (Ti factor) | 1 | 350 | 100 |
| 1d- | Superheat control circuit 1 e tsitsitseng PID (Td factor) Display 1/10K | 0.1 | 30 | 3.0 |
| 1EC | Mohloli oa sensor ea mocheso oa khase e chesang | 0 | 1 | 0 |
| 0 = ECP-P30
1 = Ka ho kenya Modbus |
||||
| 1PE | Potoloho ea taolo ea Economizer 1 e tsitsitseng PID (Kp factor) Display 1/10K | 0.1 | 10 | 2.0 |
| 1iE | Potoloho ea taolo ea economizer 1 e tsitsitseng PID (Ti factor) | 1 | 350 | 100 |
| 1dE | Economizer control circuit 1 e tsitsitseng PID (Td factor) Display 1/10K | 0.1 | 30 | 1.0 |
| 1uH | Potoloho ea alamo e phahameng ea superheat 1
0 = e holofetse 1 = e nolofalitsoe ho etsa botjha ka boits'oaro |
0 | 1 | 0 |
| 1uA | Potoloho ea alamo e phahameng ea superheat 1 | 16 | 40 | 30 |
| 1ud | Potoloho ea ho lieha ha alamo ea superheat 1 | 1 | 15 | 3 |
| 1E2 | Tokiso e ntle ea mocheso oa Hotgas o lekantsoeng. | 0 | 10 | 0 |
| Parameters Circuit 2 (feela EXD-HP2) | ||||
| Khoutu | Tlhaloso le likhetho tsa parameter | Min | Max | Feme tlhophiso |
| 2u4 | Mokhoa oa ho laola mocheso o moholo | 0 | 4 | 0 |
| 0 = Ho laola mocheso oa mocheso oa li-coil 1 = Ho laola butle mocheso oa mocheso oa li-coil
2 = PID e tsitsitseng 3 = ho laola ka potlako poleiti mocheso oa mocheso 4 = Mocheso o tloaelehileng oa mocheso oa poleiti |
||||
| 2u0 | Sehatsetsi sa Sisteme | 0 | 5 | 2 |
| 0 = R22 1 = R134a 2 = R410A 3 = R32 4 = R407C
5 = R290* 6 = R448A 7 = R449A 8 = R452A 9 = R454A* 10 = R454B* 11 = R454C* 12 = R513A 13 = R452B* 14 = R1234ze* 15 = R1234yf * *) EXN ha e lumelloe *) Tlhokomeliso - Lihatsetsi tse tukang: EXD-HP1/2 e na le mohloli o ka bang teng oa ho tima 'me ha e tsamaellane le litlhoko tsa ATEX. Ho kenya feela libakeng tse sa phatlohang. Bakeng sa lihatsetsi tse tukang feela sebelisa li-valve le lisebelisoa tse amohelehang bakeng sa eona! |
||||
| 2uP | Mofuta oa sensor ea khatello e kentsoeng (Ha DI2 e tima) | 0 | 3 | 1 |
| 0 = PT5N-07… 1 = PT5N-18…
2 = PT5N-30… 3 = PT5N-10P-FLR |
||||
| 2uu | Ho bula valve ea ho qala (%) | 10 | 100 | 20 |
| 2u9 | Nako ea ho qala ea ho bula (ea bobeli) | 1 | 30 | 5 |
| 2uL | Mosebetsi o tlase oa alamo ea mocheso o phahameng haholo | 0 | 2 | 1 |
| 0 = tima (bakeng sa mouoane o nang le likhohola) 1 = nolofalletsa ho seta bocha 2 = nolofalletsa ho seta bocha ka letsoho | ||||
| 2u5 | Superheat set-point (K)
Haeba 2uL = 1 kapa 2 (e nolofalitsoe ka koloi kapa ho seta ka letsoho) Haeba 2uL = 0 (e holofetse) |
3 0.5 |
30 30 |
6 6 |
| 2u2 | Mosebetsi oa MOP | 0 | 1 | 1 |
| 0 = tima 1 = nolofalletsa | ||||
| 2u3 | MOP set-point (°C) saturation thempereichara Factory setting ho latela sehatsetsi se khethiloeng (2u0). Boleng ba kamehla bo ka fetoloa | sheba tafole ea MOP | ||
|
2P9 |
Potoloho ea mokhoa oa alamo ea khatello e tlase 2 | 0 | 2 | 0 |
| 0 = e holofetse 1 = e nolofalitsoe ho seta botjha ka boits'oaro 2 = e nolofalitsoe ka letsoho | ||||
| 2PA | Potoloho ea alamo ea khatello e tlase (bar) 2 | -0.8 | 17.7 | 0 |
| 2Pb | Ho lieha ha alamo ea khatello e tlase (sec) potoloho ea 2 | 5 | 199 | 5 |
| 2Pd | Potoloho ea alamo ea khatello e tlase (bar) 2 | 0.5 | 18 | 0.5 |
| 2P4 | Ho emisa ts'ebetso ea alamo ea tšireletso | 0 | 2 | 0 |
| 0 = tima, 1 = nolofalletsa ho seta botjha ka boits'oaro, 2 = nolofalletsa ho seta bocha ka letsoho | ||||
| Khoutu | Tlhaloso le likhetho tsa parameter | Min | Max | Feme tlhophiso |
| 2P2 | Emisa potoloho e khaotsoeng ea alamo 2 | -20 | 5 | 0 |
| 2P5 | Ho lieha ha alamo ea tšireletso ea leqhoa, sec. | 5 | 199 | 30 |
| 2P- | Superheat control circuit 2
(Kp factor), e tsitsitseng PID Display 1/10K |
0.1 | 10 | 1.0 |
| 2 ke- | Superheat control circuit 2 (Ti factor), PID e tsitsitseng | 1 | 350 | 100 |
| 2d- | Superheat control circuit 2 (Td factor), e tsitsitseng PID - Display 1/10K | 0.1 | 30 | 3.0 |
| 2uH | Potoloho ea alamo e phahameng ea superheat 2 | 0 | 1 | 0 |
| 0 = e holofetse 1 = e nolofalitsoe ho etsa botjha ka boits'oaro | ||||
| 2uA | Sebaka se phahameng sa superheat alarm setpoint (K) potoloho ea 2 | 16 | 40 | 30 |
| 2ud | Ho lieha ha alamo ea superheat (Min) potoloho ea 2 | 1 | 15 | 3 |
| Khetho ea li-circuits ka bobeli le taolo ea mocheso oa ho lahla | ||||
| Khoutu | Tlhaloso le likhetho tsa parameter | Min | Max | Feme tlhophiso |
| Et | Mofuta oa valve | 0 | 1 | 0 |
| 0 = EXM / EXL 1 = EXN | ||||
| Hlokomela: EXD-HP2 e ka khanna li-valve tse peli tse tšoanang, ke hore, li-valve ka bobeli li tlameha ho ba EXM/EXL kapa EXN. | ||||
| 1E3 | Setpoint ea ho qala ha mocheso oa ho lahla | 70 | 140 | 85 |
| 1E4 | Sehlopha sa Taolo ea Mocheso oa ho Laola | 2 | 25 | 20 |
| 1E5 | Discharge Mokhahlelo oa mocheso | 100 | 150 | 120 |
Tafole ea MOP (°C)
| Sehatsetsi | Min. | Max. | Feme tlhophiso | Sehatsetsi | Min. | Max. | Feme tlhophiso |
| R22 | -40 | +50 | +15 | R452A | -45 | +66 | +15 |
| R134a | -40 | +66 | +15 | R454A | -57 | +66 | +10 |
| R410A | -40 | +45 | +15 | R454B | -40 | +45 | +18 |
| R32 | -40 | +30 | +15 | R454C | -66 | +48 | +17 |
| R407C | -40 | +48/ | +15 | R513A | -57 | +66 | +13 |
| R290 | -40 | +50 | +15 | R452B | -45 | +66 | +25 |
| R448A | -57 | +66 | +12 | R1234ze | -57 | +66 | +24 |
| R449A | -57 | +66 | +12 | R1234 ef | -52 | +66 | +15 |
Ho laola (valve) boitšoaro ba ho qala
(Paramethara 1uu/2uu le 1u9/2u9)
Kenya / download Key: Mosebetsi
Bakeng sa tlhahiso ea serial ea litsamaiso / li-unit, senotlolo sa ho kenya / ho jarolla se lumella phetiso ea mekhahlelo e hlophisitsoeng har'a mefuta e mengata ea litsamaiso tse ts'oanang.
Mokhoa oa ho kenya:
(ho boloka liparamente tse hlophisitsoeng ka konopo)
- Kenya konopo ha molaoli oa pele (reference) o ON, ebe o tobetsa konopo; molaetsa oa "uPL" o hlaha o lateloa ke molaetsa oa "End" bakeng sa metsotsoana e 5.
- Tlhokomeliso: Haeba molaetsa oa "Err" o bontšoa bakeng sa lenaneo le hlōlehileng, pheta mokhoa o ka holimo.
Mokhoa oa ho jarolla:
(li-parameter tse hlophisitsoeng ho tloha ho senotlolo ho ea ho balaoli ba bang)
- Koala motlakase ho molaoli e mocha
- Kenya Senotlolo se laetsoeng (ka data e bolokiloeng ho tsoa ho molaoli oa litšupiso) ho molaoli e mocha ebe o bulela phepelo ea motlakase.
- Mekhahlelo e bolokiloeng ea senotlolo e tla jarolleloa ka bo eona mohopolong o mocha oa taolo; Molaetsa oa "doL" o hlaha o lateloa ke molaetsa oa "Qetella" metsotsoana e 5.
- Molaoli e mocha ea nang le li-parameter tse ncha tse laetsoeng o tla qala ho sebetsa ka mor'a hore molaetsa oa "Qetello" o nyamele.
- Tlosa senotlolo.
- Hlokomela: Haeba molaetsa oa "Err" o bontšoa bakeng sa lenaneo le hlōlehileng, pheta mokhoa o ka holimo.
Phoso/Tšoaro ya alamo
| Alamo khoutu | Tlhaloso | Tse amanang paramethara | Alamo phetiso | Seqhubu | Se o lokelang ho se etsa? | E hloka tataiso tsosolosa kamora ho rarolla alamo |
| EA-1E0 / 2E0 | Phoso ea sensor ea khatello ea 1/2 | – | E qalile | E haufi ka botlalo | Sheba khokahano ea lithapo 'me u lekanye lets'oao la 4 ho isa ho 20 mA | Che |
| EA-1E1 / 2E0 | Sensor ea mocheso 1/2 phoso | – | E qalile | E haufi ka botlalo | Lekola khokahano ea lithapo 'me u lekanye ho hanyetsa ha sensor | Che |
| 1Mohl | Hlakola sensor ea mocheso oa khase e chesang 3 phoso | – | E qalile | Ho sebetsa | Lekola khokahano ea lithapo 'me u lekanye ho hanyetsa ha sensor | Che |
| 1Π-/2Π- | EXM/EXL kapa EXN
phoso ea khokahanyo ea motlakase |
– | E qalile | – | Sheba khokahanyo ea lithapo 'me u lekanye khanyetso ea matsoelintsoeke | Che |
| 1 Phatlalatso | Tlosa mocheso oa khase e chesang ka holimo ho moeli | E qalile | Ho sebetsa | Sheba ho bula ha valve / hlahloba phallo ea metsi bakeng sa khase e sa lefelloeng / hlahloba sensor ea mocheso oa mocheso oa khase e tsoang | Che | |
| 1AF/2AF |
Tšireletso ea leqhoa |
1P4/2P4: 1 | E qalile | E haufi ka botlalo | Lekola sistimi bakeng sa lisosa tsa khatello e tlase joalo ka mojaro o sa lekaneng ho mouoane | Che |
| 1AF/2AF
ho panya |
1P4/2P4: 2 | E qalile | E haufi ka botlalo | Ee | ||
| 1AL/2AL | Mocheso o tlase haholo (<0,5K) | 1uL/2uL: 1 | E qalile | E haufi ka botlalo | Lekola khokahano ea wiring le ts'ebetso ea valve | Che |
| 1AL/2AL ho panya | 1uL/2uL: 2 | E qalile | E haufi ka botlalo | Ee | ||
| 1AH/2AH | Mocheso o phahameng haholo | 1uH/2uH: 1 | E qalile | Ho sebetsa | Sheba tsamaiso | Che |
| 1AP/2AP |
Khatello e tlase |
1P9/2P9: 1 | E qalile | Ho sebetsa | Sheba sistimi bakeng sa lisosa tsa khatello e tlase joalo ka tahlehelo ea sehatsetsing | Che |
| 1AP/2AP ho panya | 1P9/2P9: 2 | E qalile | Ho sebetsa | Ee | ||
| Phoso | E hlolehile ho kenya/ho khoasolla | – | – | – | Pheta mokhoa oa ho kenya / ho khoasolla | Che |
Hlokomela:
Ha lialamo tse ngata li etsahala, alamo ea bohlokoa ka ho fetisisa e hlahisoa ho fihlela e hlakoa, ebe alamo e latelang e phahameng ka ho fetisisa e tla hlahisoa ho fihlela lialamo tsohle li hlakotsoe. Ke feela ka mor'a moo li-parameter li tla bontšoa hape.
Emerson Climate Technologies GmbH
- Ke Borsigturm 31 I 13507 Berlin I Jeremane
- www.climate.emerson.com/en-gb.
Litokomane / Lisebelisoa
 |
EMERSON EXD-HP1 2 Controller ka ModBus Communication Capability [pdf] Buka ea Taelo EXD-HP1 2 Controller ka ModBus Communication Capability, EXD-HP1 2, Controller with ModBus Communication Capability, ModBus Communication Capability, Communication |