ELSEMA MCS Motor Controller e le Mong
Litlhaloso
- Nomoro ea Karolo: MCS
- Heke e le 'ngoe le molaoli oa mamati bakeng sa 24 / 12 Volt motor ho fihla ho 120 Watts
- E ts'ehetsa li-switches tse fokolang kapa ho emisa ka mochini
- Koala Auto e Fetohang le Phihlello ea Batsamai
- Ho qala ha motor le bonolo ho emisa
- Lotlolo e ka feto-fetohang le mabone a khantšitsoeng
- Mesebetsi e feto-fetohang ea tšireletso ea photoelectric
- LCD e kholo ea mela e 4 ho bontša boemo ba molaoli
- 12 Volt DC Output ho lisebelisoa tsa motlakase le litaelo tsa ho seta
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho kenya
- Pele o kenya, etsa bonnete ba hore o balile le ho utloisisa litaelo tsohle bukeng ea litaelo.
- Ho kenya ho lokela ho etsoa ke basebetsi ba koetlisitsoeng ba theknoloji.
- Hokela selaoli mohloling o nepahetseng oa matla ho latela setšoantšo sa wiring se fanoeng.
Tlhophiso
- Latela litaelo tsa ho seta tse fanoeng bukeng ea litaelo ho hlophisa molaoli ho latela litlhoko tsa hau tse ikhethileng.
- Fetola litlhophiso tsa Auto Close, Phihlello ea Batsamaisi, lebelo la koloi, matla, le likarolo life kapa life tse lakatsehang.
Tshebetso
- Sebelisa konopo e fanoeng ea push kapa remote control ho sebelisa heke.
- Lekola ponts'o ea LCD bakeng sa liapdeite tsa maemo le litlhokomeliso.
- Haeba ho na le mathata, sheba karolo ea ho rarolla mathata ea bukana.
LBH
- P: Ke libeteri tsa mofuta ofe tse lumellanang le molaoli oa MCS?
- A: Taolo ea MCS e lumellana le Lithium-ion le libeteri tsa asiti ea lead.
- P: Na molaoli oa MCS a ka sebelisoa bakeng sa liheke tsa ho swing le tse thellang?
- A: E, molaoli oa MCS o loketse liheke tse sothehileng le tse thellang.
- P: Nka fetola lebelo la enjene joang le matla ka ho sebelisa molaoli oa MCS?
- A: O ka fetola lebelo la enjene le matla ka har'a li-setting tsa molaoli. Sheba bukana ea litaelo bakeng sa litaelo tse qaqileng.
Tlhokomeliso ea bohlokoa le litaelo tsa polokeho
- Lisebelisoa tsohle le liteko li tlameha ho etsoa feela ka mor'a ho bala le ho utloisisa litaelo tsohle ka hloko. Lithapo tsohle li lokela ho etsoa feela ke basebetsi ba koetlisitsoeng ba theknoloji. Ho hloleha ho latela litaelo le litemoso tsa polokeho ho ka baka kotsi e mpe le/kapa tšenyo ea thepa.
- Elsema Pty Ltd e ke ke ea ikarabella bakeng sa kotsi leha e le efe, tšenyo, litšenyehelo, litšenyehelo kapa tseko efe kapa efe ho motho leha e le ofe kapa thepa e ka bakoang ke tšebeliso e fosahetseng kapa ho kenya sehlahisoa sena.
- Kotsi ea thepa e rekiloeng e tla ba ntle le haeba ho lumellanoe ka mokhoa o mong ka lengolo le ngotsoeng ho ea ho moreki ha ho tlisoa thepa.
- Lipalo kapa likhakanyo life kapa life tse fanoeng bakeng sa tšebetso ea thepa li ipapisitse le boiphihlelo ba k'hamphani 'me ke seo k'hamphani e se fumanang litekong. Khampani e ke ke ea amohela melato ea ho hloleha ho latela lipalo kapa likhakanyo ka lebaka la maemo a fapaneng a amang ex.ample Litaolo tsa Remote tsa Radio.
- Ka kopo boloka taelo ena ea ho seta bakeng sa tšebeliso ea nako e tlang.
Likaroloana
- Lithium-ion le tjhaja ea betri ea asiti ea lead
- E loketse liheke tsa swing le tse thellang
- Ts'ebetso ea motlakase e le 'ngoe
- Eclipse Operating System (EOS)
- Ho qala ha motor le bonolo ho emisa
- Lebelo le fokolang le ho fetola matla
- LCD e kholo ea 4-line ho bontša boemo ba balaoli le litaelo tsa ho seta
- 1-Touch control bakeng sa ho seta habonolo
- Lisebelisoa tse fapaneng, konopo ea ho tobetsa, bula feela, koala feela, emisa, motho ea tsamaeang ka maoto le Photoelectric Beam
- E ts'ehetsa li-switches tse fokolang kapa ho emisa ka mochini
- Koala Auto e Fetohang le Phihlello ea Batsamai
- Lotlolo e ka feto-fetohang le mabone a khantšitsoeng
- Mesebetsi e feto-fetohang ea tšireletso ea photoelectric
- 12 Volt DC Output ho lisebelisoa tsa motlakase
- Lisebelisoa tsa lits'ebeletso, ts'ireletso ea password, mokhoa oa matsatsi a phomolo le likarolo tse ling tse ngata
Tlhaloso
- Motor Controller Single (MCS) ha e felle feela moloko o latelang; ke phetohelo indastering. Sepheo sa rona e ne e le ho qapa molaoli ea sebetsang hantle le ea khonang ho etsa hoo e batlang e le mosebetsi o mong le o mong o batloang indastering ea liheke le mamati. MCS ha e emetse feela tsoelo-pele empa ke "Quantum Leap" indastering, e lahlela Eclipse holim'a lilaoli tsohle tse tsoetseng pele tsa makoloi. Selaoli sena se secha se bohlale sa motlakase ke papali e ntle ka ho fetisisa bakeng sa heke ea hau ea othomathike kapa li-mothara tsa mamati.
- MCS's Eclipse® Operating System (EOS) ke sistimi e tsamaellanang le menyetla ea basebelisi e sebelisang konopo ea 1-touch ho laola, ho seta le ho tsamaisa liheke, mamati le mekoallo ea othomathike. E sebelisa skrine e kholo ea mela e 4 ea LCD e bonts'ang 'malo o hlakileng oa ts'ebetso ea enjene le boemo ba lintho tsohle tse kenang le tse hlahisoang.
- Taolo e bohlale e hahiloe ho tloha fatše ho ea holimo, e ipapisitse le maikutlo a bareki le ho sebelisa theknoloji ea kajeno. Ka mesebetsi ea eona e ruileng, theko e bonolo ea bareki le ho tsepamisa maikutlo nakong ea nts'etsopele e leng boiketlo ba tšebeliso le ho seta ho etsa hore molaoli enoa e be boto ea ho qetela ea ho laola likoloi tsa hau.
- Likhetho tse bonolo tsa Elsema tsa ho eketsa li-control tsa hole kapa mofuta ofe kapa ofe oa Photoelectric Beams li etsa hore ho be le mokhoa o bonolo oa basebelisi, ha o ntse o qoba mokhoa oa ho koala lisebelisoa.
Nomoro ea Karolo:
| Karolo Che. | Litaba | Karolo Che. | Litaba | |
| MCS | Keiti e le 'ngoe le molaoli oa monyako
bakeng sa 24 / 12 Volt motor ho fihla ho 120 Watts |
MCSv2 | Keiti e le 'ngoe le molaoli oa monyako
bakeng sa 24 / 12 Volt e kholo ho feta 120 Watts |
|
| Bakeng sa mofuta o kentsoeng, bona letoto la rona la MC | ||||
| Letsatsi Liheke | ||||
| Solar24SP | Solar kit bakeng sa liheke tse peli kapa tse le 'ngoe, e kenyelletsa tjhaja ea letsatsi ea MPPT & EA-24-KSt 15.0Ah bekapo betri le 40 Watt solar panel. | Solar12 | Solar kit bakeng sa liheke tse peli kapa tse le 'ngoe, e kenyelletsa tjhaja ea letsatsi ea MPPT & EA-12-KSt 15.0Ah bekapo betri | |
- MCS e loketse likoloi tse fihlang ho 120 Watts. Ka holimo ho 120 Watts e sebelisa MCSv2.
- Karete ea taolo ea MCS & MCSv2 e ka sebelisoa ho laola liheke tsa othomathike, mamati, liheke tsa boom le lifensetere tsa othomathiki kapa liphaposi tse holo.
Tobetsa Master Control bakeng sa metsotsoana e 2 ho kenya sebopeho sa menu
Setšoantšo sa Khokahano ea MCS
Mehala ea Motlakase - Phepelo, Likoloi le Lintho tse Kenyellelitsoeng
Kamehla tima motlakase pele o kenya mohala.
Etsa bonnete ba hore lithapo tsohle li phethiloe le hore motor e hokahane le karete ea taolo. Bolelele ba likhoele tse khothalelitsoeng e lokela ho ba 12mm bakeng sa likhokahano tsohle tsa polaka ea li-terminal blocks.
Sets'oants'o se ka tlase se bonts'a phepelo, li-motor, le lisebelisoa tse fumanehang le litlhophiso tsa kamehla tsa feme bakeng sa tlhahiso ka 'ngoe.
Pele ho Setupo
Karete ea taolo ea MCS e ka kengoa mefuteng e fapaneng ea ho seta. Ka tlase ke litlhophiso tse 3 tse tloaelehileng. Ho bohlokoa haholo ho khetha mofuta o nepahetseng oa ho seta nakong ea i-Learn.
- Ha ho li-switches tse fokolang.
Setupong sena, karete e its'etleha holim'a toro ea hajoale ea enjene ho fumana maemo a bulehileng le a koetsoeng ka botlalo. U hloka ho fetola maqheka a hau ho latela hore heke e bulehe le ho koaloa ka botlalo. Ho beha meketjana e phahameng haholo ho ka etsa hore enjene e eme sebakeng se bulehileng kapa se koetsoeng. (Sheba tataiso ea ho rarolla mathata). - Fokotsa li-switches tse hokahaneng le karete ea Taolo.
Li-switches tsa moeli li ka koaloa ka tloaelo (NC) kapa ka tloaelo Open (NO). U hloka ho khetha mofuta o nepahetseng nakong ea i-Learn. Setupong sena li-switches tsa moeli li hokahantsoe ka kotloloho ho karete ea taolo - Fokotsa li-switches ka letoto le nang le enjene.
Li-switches tsa moeli li hokahane ka letoto le motlakase. Li-switches tsa moeli li tla khaola motlakase ho enjene ha e kentsoe.
Seta Mehato ea ho Ithuta:
- Sheba LCD 'me u latele litaelo tse bontšitsoeng.
- Ho seta ho i-Learning kamehla ho ka sitisoa ka konopo ea ho emisa kapa ka ho tobetsa konopo ea Master Control.
- Kenya Menu 11 ho qala i-Learning kapa likarete tse ncha tsa taolo li tla u susumelletsa hore u etse i- Learning.
- Karete ea taolo e tla bula le ho koala heke kapa lemati ka makhetlo a 'maloa ho ithuta mojaro le maeto a maeto. Ena ke profiling ea koloi e sebelisang theknoloji ea morao-rao e bohlale.
- Buzzer e tla bontša hore thuto e atlehile. Haeba ho ne ho se na buzzer, hlahloba lithapo tsohle tsa motlakase ho kenyelletsa le phepelo ea motlakase ebe u khutlela mohatong oa 1.
- Haeba u utloa molumo ka mor'a i-Learn, heke kapa lemati le se le loketse ho sebelisoa.
Liphetoho tsa Moeli
Haeba u sebelisa li-switches tse fokolang, etsa bonnete ba hore li hokahane hantle. Karete ea taolo e ka sebetsa ka li-switches tsa moeli tse hokahaneng ka kotloloho le li-terminals tsa likarete kapa ka letoto le nang le enjene. Sheba litšoantšo tse ka tlase:
Ka ho tloaeleha, li-switches tsa moeli tse kareteng ea taolo li atisa ho koaloa (NC). Sena se ka fetoloa hore se bulehe ka tloaelo (NO) nakong ea mehato ea ho seta.
Sehlomathiso sa boikhethelo
G4000 - GSM Dialer - 4G Gate Opener
Keketso ea module ea G4000 ho likarete tsa taolo ea Eclipse e fetola ts'ebetso ea tsona ka ho nolofalletsa ts'ebetso ea mehala ea cellular bakeng sa liheke. Khokahano ena e lumella basebelisi ho bula kapa ho koala heke ba le hole ka mohala oa mahala. G4000 e ntlafatsa boiketlo, ts'ireletso le ts'ebetso e nepahetseng, e e etsa ntlafatso e nepahetseng bakeng sa lits'ebetso tsa sejoale-joale tsa taolo ea phihlello.
Sheba setšoantšo sa wiring se ka tlase:
Hokela ho Open input kareteng ya taolo haeba tshebetso ya Open Only e hlokeha
Sesebelisoa sa ka ntle sa wiring
Karete ea Taolo ea Elsema
Hokela ho Open input kareteng ya taolo haeba tshebetso ya Open Only e hlokeha
- Auto Close ke tšobotsi e koalang heke ka bo eona ka mor'a hore nako e behiloeng esale pele e baloe ho fihlela ho zero. Karete ea taolo e na le Auto Close e tloaelehileng le likarolo tse 'maloa tse ikhethang tsa Auto Close e' ngoe le e 'ngoe e na le linako tsa eona tsa ho bala.
- Elsema Pty Ltd e khothalletsa hore Photoelectric Beam e hoketsoe kareteng ea taolo ha ho sebelisoa khetho efe kapa efe ea Auto Close.
- Haeba Stop input e kentswe tshebetsong Auto Close e koetswe bakeng sa potoloho eo feela.
- Sebali sa Auto Close se ke ke sa balla fatše haeba Konopo ea Push, Open kapa Photoelectric Beam e ts'oaroe e sebetsa.
| Lenane Che. | Auto Koala Likaroloana | Feme Ea kamehla | E ka fetoha |
| 1.1 | Tloaelehileng Auto Close | E tima | 1 - 600 metsotsoana |
| 1.2 | Koala Auto ka Photoelectric Trigger | E tima | 1 - 60 metsotsoana |
| 1.3 | Koala Auto Ka mor'a Tšitiso e Butsoeng | E tima | 1 - 60 metsotsoana |
| 1.4 | Koala Auto ka mor'a hore Matla a Tsosolosoe | E tima | 1 - 60 metsotsoana |
| 1.5 | Tloaelehileng Auto Close ka Sequential Obstructions | 2 | Min = Ho tima, Max = 5 |
| 1.6 | Koala Auto Hafeela E Buletsoe ka Botlalo | E tima | E tima/E butswe |
| 1.7 | Etsoa |
- Tloaelehileng Auto Close
Heke e tla koaloa ka mor'a hore sebali sena sa nako se baloe ho fihlela ho zero. - Koala Auto ka Photoelectric Trigger
Koala ena ea Auto e qala ho bala ho theosa hang ha Beam ea Photoelectric e se e hlakotsoe ka mor'a ho qhomisa le haeba heke e sa buloa ka botlalo. Haeba ho se na seqhutsu sa Photoelectric Beam heke e ke ke ea koala Ka bohona. - Koala Auto Ka mor'a Tšitiso e Butsoeng
Haeba heke e bula 'me e otla tšitiso ka tloaelo heke e tla ema' me e lule sebakeng sena. Haeba ts'ebetso ena e lumelletsoe, tšitiso e tla qala ho balla nako ho ea tlase 'me ka zero e tla koala heke. - Koala Auto ka mor'a hore Matla a Tsosolosoe
Haeba heke e bulehile boemong leha e le bofe 'me joale ho na le ho hlōleha ha matla, ha matla a tsosolosoa heke e tla koaloa ka nako ena. - Tloaelehileng Auto Close ka Sequential Obstructions
Haeba Auto Close e tlwaelehileng e setilwe mme heke e koaleha nthong e itseng heke e tla ema ebe e bula hape. Tlhophiso ena e beha nako eo heke e tla leka ho Koala ka Botho. Kamora ho leka moeli o behiloeng heke e tla lula e butsoe. - Koala Auto Hafeela E Buletsoe ka Botlalo
Sebali sa Auto Close se ke ke sa tima ntle le haeba heke e butsoe ka botlalo.
Ho na le mefuta e 'maloa ea mekhoa ea ho fihlella ba tsamaeang ka maoto. Mokhoa oa ho kena ho ba tsamaeang ka maoto o bula keiti nako e khuts'oane ho lumella motho ho kena hekeng empa e sa lumelle ho kena koloing.
Elsema Pty Ltd e khothalletsa hore Photoelectric Beam e hoketsoe kareteng ea taolo ha ho sebelisoa khetho efe kapa efe ea Auto Close.
| Lenane Che. | Moahelani Phihlello Likaroloana | Feme Ea kamehla | E ka fetoha |
| 2.1 | Nako ea Maeto ea Batsamai | 3 metsotsoana | 3 - 20 metsotsoana |
| 2.2 | Nako ea ho Koala ka Batsamai ka maoto | E tima | 1 - 60 metsotsoana |
| 2.3 | Nako ea ho Koala Batsamai ka maoto ka PE trigger | E tima | 1 - 60 metsotsoana |
| 2.4 | Ho Koala Batsamai ka maoto ho Litšitiso tse Sequential | 2 | Min = Ho tima, Max = 5 |
| 2.5 | Ho kena ho Batsamai ka maoto ka Hold Gate | E tima | E tima/E butswe |
| 2.6 | Etsoa |
- Nako ea Maeto ea Batsamai
Sena se seta nako eo heke e buloang ka eona ha ho kenoa ha Pedestrian Access e kentsoe tšebetsong. - Nako ea ho Koala ka Batsamai ka maoto
Sena se seta sebala nako bakeng sa ho kwala heke ka boyona ha Motsamao wa Batsamai ka maoto o kentswe tshebetsong. - Nako ea ho Koala Batsamai ka maoto ka PE Trigger
Koala ena ea Auto e qala ho bala ho theosa hang ha Beam ea Photoelectric e se e hlakotsoe ka mor'a ho qhomisa, ha heke e le boemong ba ho Finyella Batsamai. Haeba ho se na sethahasetsi sa Photoelectric Beam heke e tla lula e le boemong ba Ho kena ho Batsamai. - Ho Koala Batsamai ka maoto ho Litšitiso tse Sequential
Haeba Pedestrian Access Auto Close e setilwe mme heke e koaleha nthong e itseng heke e tla ema ebe e bula hape. Tlhophiso ena e beha nako eo heke e tla leka ho Koala ka Botho. Kamora ho leka moeli o behiloeng heke e tla lula e butsoe. Ha e TLOHILE, heke e tla lula e leka ho Koala Ka Sebele. - Ho kena ho Batsamai ka maoto ka Hold Gate
Haeba heke e ts'oarellang ea Batsamaisi e BUTSE 'me Keiti ea Batsamai e kentsoe ka ho sa feleng heke e tla lula e butsoe sebakeng sa Batsamaisi ba Pedestrian. Kenyelletso e bulehileng, Konopo e koalehileng, Konopo ea Push le li-remoutu tse kentsoeng. E sebelisoa lits'ebetsong tsa ho tsoa ha Mollo.
Sena se o lumella ho fetola polarity ea Photoelectric Beam, Limit Switch le Stop inputs.
|
Lenane Che. |
Kenyeletso Mesebetsi | Feme Ea kamehla | E ka fetoha |
| 3.1 | Photoelectric Beam Polarity | Hangata E Koaletsoe | Ka tlwaelo e kwetswe/ E butswe ka tlwaelo |
| 3.2 | Moeli Switch Polarity | Hangata E Koaletsoe | Ka tlwaelo e kwetswe/ E butswe ka tlwaelo |
| 3.3 | Emisa Polarity ea ho Kena | Ka tloaelo Open | Ka tlwaelo e kwetswe/ E butswe ka tlwaelo |
| 3.4 | Etsoa |
Photoelectric Beam kapa sensor ke sesebelisoa sa polokeho se behoang ka mose ho heke 'me ha sefate se thijoa se emisa heke e tsamaeang. Ts'ebetso ka mor'a hore heke e eme e ka khethoa ho menu ena.
| Lenane Che. | Motlakase oa lifoto Sebopeho sa Beam | Feme Ea kamehla | E ka fetoha |
| 4.1 | Beam ea Photoelectric | PE Beam e ema ebe e bula heke ka nako e haufi | PE Beam e emisa ebe e bula heke ka potoloho e haufi. |
| 4.2 | Etsoa |
- Boemo ba feme bakeng sa PE beam input "hangata bo koetsoe" empa sena se ka fetoloa hore se bulehe ka tloaelo ho Menu 3.1.
- Elsema Pty Ltd e khothalletsa hore Photoelectric Beam e hoketsoe kareteng ea taolo ha ho sebelisoa khetho efe kapa efe ea Auto Close.
- Elsema e rekisa mefuta e fapaneng ea Mabone a Photoelectric. Re boloka Retro-Reflective le Ka Beam mofuta oa Photoelectric Beams.
Photo Beam Wiring
- Karete ea taolo e na le liphetho tse peli, Output 1 le Output 2. Mosebelisi a ka fetola ts'ebetso ea liphetho tsena ho notlela / brake, khanya ea tlhompho, mohala oa ts'ebeletso, khanya ea strobe (Temoso) kapa heke e butsoe (heke e sa koaloa ka botlalo).
- Output 1 ke tlhahiso ea relay e nang le mabitso a tloaelehileng le a tloaelehileng a bulehileng. Feme ea kamehla ke ts'ebetso ea senotlolo / brake tokollo.
- Output 2 ke tlhahiso e bulehileng ea mokelli. Ho hloleha ha feme ke tšebetso ea mabone a matle.
| Lenane Che. | Sephetho Mosebetsi | Feme Ea kamehla | E ka fetoha |
| 5.1 | Sephetho sa 1 | Notlela / Brake | Lock / BrakeCourtesy Light Service Call——————————————Strobe (Warning) LightGate Open Mag Lock |
| 5.2 | Sephetho sa 2 | Ka tlhompho Leseli | Lock / BrakeCourtesy Light Service CallStrobe (Temoso) Light Gate Bula |
| 5.3 | Etsoa |
Notlela / Brake Output
Boemo ba feme bakeng sa tlhahiso ea 1 ke tokollo ea senotlolo / brake. Output 1 ke voltagkhokahano ea e-free ea relay le mabitso a tloaelehileng le a bulehileng hangata. Ho ba le eona voltagE-free eu lumella ho hokela 12VDC/AC, 24VDC/AC kapa 240VAC ho tse tloaelehileng. Lebitso le tloaelehileng le bulehileng le matlafatsa sesebelisoa. Sheba setšoantšo se ka tlase:
Ka tlhompho Leseli
Sehlahisoa sa fektheri bakeng sa lebone la tlhompho ke sehlahisoa sa 2. Output 2 ke sehlahisoa se bulehileng sa pokello. Sephetho sena se sebelisetsoa ho chencha phepelo ea kantle joalo ka Elsema's REL12-1 e ka rekoang ka thoko. Sheba setšoantšo leqepheng le latelang.
Sephetho sa Mehala ea Ts'ebeletso
Ekaba output 1 kapa output 2 e ka fetolelwa ho sesupo sa call ya tshebeletso. Sena se tla hlahisa tlhahiso ha k'haontara ea tšebeletso ea software e fihletsoe. E sebedisetsoa ho hlokomelisa ba kenyang kapa beng ba eona ha heke e lokela ho sebetsoa. Ho sebelisa moamoheli oa GSM oa Elsema ho lumella ba kenyang kapa beng ba bona ho fumana molaetsa oa SMS le mohala ha ts'ebeletso e le teng.
Strobe (Tlhokomeliso) Lebone ha o bula kapa o koala
Sehlahisoa sa relay se kengoa tšebetsong neng kapa neng ha heke e sebetsa. Feme ea kamehla e Off. Ekaba tlhahiso ea 1 kapa ea 2 e ka fetoleloa ho leseli la strobe (Temoso).
Keke E Bulehile
Sehlahisoa sa relay se kenngoa neng kapa neng ha heke e sa koaloa ka botlalo. Feme ea kamehla e Koetsoe. Ekaba sephetho sa 1 kapa sephetho sa 2 se ka fetoloa hore ebe heke e butsoe.
Menu 6.1 - Lock / Brake Output Mekhoa
Tlhahiso ea relay ka har'a mokhoa oa senotlolo / brake e ka hlophisoa ka mekhoa e fapaneng.
| Lenane Che. | Notlela / Brake Mekhoa | Feme Ea kamehla | E ka fetoha |
| 6.1.1 | Open Lock / Brake Activation | 2 metsotsoana | 1 - 30 metsotsoana kapa u tšoare |
| 6.1.2 | Koala Lock / Brake Activation | E tima | 1 - 30 metsotsoana kapa u tšoare |
| 6.1.3 | Bula Pre-Lock / Brake Activation | E tima | 1 - 30 metsotsoana |
| 6.1.4 | Koala Pre-Lock / Brake Activation | E tima | 1 - 30 metsotsoana |
| 6.1.5 | Etsoa |
- Open Lock / Brake Activation
Sena se beha nako eo tlhahiso e kentsoeng ka eona ka tsela e bulehileng. Femethari ea kamehla ke metsotsoana e 2. Ho e beha ho Hold ho bolela hore tlhahiso e kentsoe tšebetsong bakeng sa kakaretso ea nako ea ho tsamaea sebakeng se bulehileng. - Koala Lock / Brake Activation
Sena se beha nako eo tlhahiso e kentsoeng ka eona haufi le moo. Kakaretso ea feme e koetsoe. Ho e beha ho Tšoaroa ho bolela hore tlhahiso e kentsoe tšebetsong bakeng sa kakaretso ea nako ea leeto le haufi. - Bula Pre-Lock / Brake Activation
Sena se beha nako eo tlhahiso e kentsoeng pele motlakase o qala ka tsela e bulehileng. Kakaretso ea feme e Koetsoe. - Koala Pre-Lock / Brake Activation
Sena se beha nako eo tlhahiso e kentsoeng pele enjene e qala ka tsela e haufi. Kakaretso ea feme e Koetsoe.
Menu 6.2 – Courtesy Light Output Mode
Phaello ea relay ka mokhoa oa mekhoa e metle e ka fetoloa ho tloha metsotsoana e 30 ho isa ho e 300. Sena se beha nako eo lebone la courtesy le kentsoeng ka lona. Boemo ba feme ke metsotsoana e 60.
| Lenane Che. | Ka tlhompho Leseli Mokhoa | Feme Ea kamehla | E ka fetoha |
| 6.2.1 | Ka tlhompho ea Light Activation | 60 metsotsoana | 30-300 metsotsoana |
| 6.2.2 | Etsoa |
Menu 6.3 – Strobe (Temoso) Light Output Mode
Tlhahiso ea relay ka mokhoa oa strobe (Temoso) e ka hlophisoa ka mekhoa e fapaneng:
| Lenane Che. | Strobe (Temoso) Mokhoa oa Leseli | Feme Ea kamehla | E ka fetoha |
| 6.3.1 | Pre-Open Strobe (Tlhokomeliso) Ts'ebetso ea Leseli | E tima | 1 - 30 metsotsoana |
| 6.3.2 | Koala Pele ho Koala Strobe (Tlhokomeliso) Tšebeliso ea Leseli | E tima | 1 - 30 metsotsoana |
| 6.3.3 | Etsoa |
- Pre-Open Strobe Light Activation
Sena se beha nako eo lebone la strobe le sebetsang ka lona pele heke e sebetsa ka tsela e bulehileng. Kakaretso ea feme e Koetsoe. - Kenyelletso ea Leseli la Strobe pele ho Koala
Sena se beha nako eo lebone la strobe le sebetsang ka lona pele heke e sebetsa haufi. Kakaretso ea feme e Koetsoe.
Menu 6.4 – Mokgwa wa Output wa Mohala wa Tshebeletso
- Sena se beha palo ea lipotoloho tse felletseng (Bula le ho Koala) tse hlokoang pele buzzer e hahelletsoeng ka hare e kengoa tšebetsong. Hape liphetho tsa karete ea taolo li ka hlophisoa hore li sebelisoe haeba palo ea lipotoloho e phethiloe. Ho hokela moamoheli oa GSM oa Elsema ho sephetho ho lumella beng ba bona ho fumana mohala le molaetsa oa SMS ha ts'ebeletso e le teng.
- Ha molaetsa oa "Service Call Due" o hlaha ho LCD, ho tla hlokahala mohala oa ts'ebeletso. Kamora hore tshebeletso e etswe, latela melaetsa e ho LCD.
| Lenane Che. | Tshebeletso Letsa Mokhoa | Feme Ea kamehla | E ka fetoha |
| 6.4.1 | Counter ea litšebeletso | E tima | Min: 2000 ho ea ho Max: 50,000 |
| 6.4.2 | Etsoa |
Karete ea taolo e na le likarolo tse ngata tse ikhethang tseo kaofela li ka ikamahanyang le ts'ebeliso ea hau e ikhethileng.
| Lenane Che. | E khethehileng Likaroloana | Feme Ea kamehla | E ka fetoha |
| 7.1 | Remote Control Bula Feela | E tima | Off / Qalelle |
| 7.2 | Holiday Mode | E tima | Off / Qalelle |
| 7.3 | Mokhoa oa ho Boloka Matla | E tima | Off / Qalelle |
| 7.4 | Emisa ka Othomathike 'me U Bule ha U koala | On | Off / Qalelle |
| 7.5 | Receiver Channel 2 Dikgetho | E tima | Koala / Leseli / Phihlello ea Batsamai / E Koala Feela |
| 7.6 | Tobetsa 'me U hatelle Bakeng sa Kenyo e Butsoeng | E tima | Off / Qalelle |
| 7.7 | Tobetsa 'me U hatelle Bakeng sa ho Koala Kenyo | E tima | Off / Qalelle |
| 7.8 | Fesetere / Louvre | E tima | Off / Qalelle |
| 7.9 | Reserved | Reserved | Reserved |
| 7.10 | Tobetsa 'me u tšoare Channel 1 e hole (Bula) | E tima | Off / Qalelle |
| 7.11 | Tobetsa 'me u tšoare Channel 2 e hole (Koala) | E tima | Off / Qalelle |
| 7.12 | Emisa ho Kena | Emisa Kgoro | Ema 'me u khutlele morao bakeng sa 1sec |
| 7.13 | Etsoa |
- Remote Control Bula Feela
Ka ho sa feleng, remoutu e lumella mosebelisi ho bula le ho koala heke. Libakeng tseo batho ba kenang ho tsona, mosebelisi o lokela ho bula heke feela mme a se ke a tšoenyeha ka ho e koala. Hangata, Auto Close e sebelisoa ho koala heke. Mokhoa ona o thibela ho koala ha li-remoutu. - Holiday Mode
Karolo ena e tima li-remoutu tsohle. - Mokhoa oa ho Boloka Matla
Sena se beha karete ea taolo maemong a tlase haholo a standby a fokotsang sekoloto sa hau sa motlakase ha o ntse o boloka tšebetso le ts'ebetso e tloaelehileng. - Emisa ka Othomathike 'me U Bule ha U koala
Ka tsela e iketsang ha heke e koalehile 'me konopo ea push kapa remote control e kentsoe tšebetsong e tla ema ebe e bula heke. Ha tšobotsi ena e koetsoe, heke e tla ema feela. Ho bula ka bohona ho tla tingoa. - Receiver Channel 2 Dikgetho
Seteishene sa 2nd se amohelang se ka hlophisoa ho laola mabone a matle, phihlello ea ba tsamaeang ka maoto kapa se ka sebelisoa bakeng sa ho koala feela. - Tobetsa 'me U Tšoarele ho Bula le ho Koala Lintho Tse Kenyelitsoeng
Haeba sesebelisoa sena se ON, mosebelisi o tlameha ho lula a tobetsa konopo e butsoeng kapa e koalang hore e kenngoe. - Fensetere kapa Mokhoa oa Louvre
Mokhoa ona o ntlafatsa karete ea taolo bakeng sa ho sebetsa lifensetere tsa elektroniki kapa li-louvres. - Tobetsa 'me U Tšoarele bakeng sa Remote Channel 1 (Open) le Channel 2 (Koala)
Likonopo tse hole tsa kanale 1 & 2 li tla hloka ho hlophisoa mocha oa 1 & 2 oa moamoheli. Mosebelisi o tlameha ho tsoela pele ho tobetsa konopo ea remote hore heke e bule kapa e koalehe. Liheke li tla emisa hang ha likonopo li lokolloa. - Emisa Likhetho tsa ho Kena
Ho kenya letsoho ho ka behoa ho emisa heke kapa ho emisa le ho khutlela morao bakeng sa 1sec. Taba ea mantlha ke ho emisa heke.
Sena se seta moeli oa sensitivity oa hajoale kaholimo ho lebelo le tloaelehileng ho khopisa heke haeba ho ka bonoa tšitiso. Mekhahlelo e fapaneng ea litšitiso le nako ea karabelo e ka beoa bakeng sa tsela e bulehileng le e haufi.
Moeli o fokolang o tla lumella khatello e fokolang e kentsoeng ho khopa heke haeba e otla ntho. Moeli o ka holimo o tla lumella tekanyo e kholo ea khatello e sebelisoang ho khopa heke haeba e otla ntho.
| Lenane Che. | Tšitiso ea ho lemoha Margins le Nako ea Karabelo | Feme Ea kamehla | E ka fetoha |
| 8.1 | Bula Margin ea Thibelo | 1 Amp | 0.2 - 6.0 Amps |
| 8.2 | Koala Margin ea Thibelo | 1 Amp | 0.2 - 6.0 Amps |
| 8.3 | Bula 'me U Koale Mokhahlelo oa Tšitiso ea Slow Speed | 1 Amp | 0.2 - 6.0 Amps |
| 8.4 | Tšitiso Lemoha Nako ea Karabelo | Mahareng | E Potlakile, e Mahareng, e na le butle ebile e lieha haholo |
| 8.5 | Etsoa |
Margin Example
- Motor e sebetsa ho 2 Amps mme moeli o behiloe ho 1.5 Amps, tšibollo ea tšitiso e tla etsahala ka 3.5 Amps (Tsela e Tloaelehileng ea ho Running Current + Margin).
- Bakeng sa litlhophiso tse phahameng tsa marang-rang, transformer ea phepelo e lokela ho ba kholo ka ho lekana ho fana ka matla a holimo a marang-rang.
- Haeba heke e otla ntho ha e koala e tla ema ka bo eona ebe e bula hape. Haeba heke e otla ntho ha e bula e tla emisa ka bo eona.
| Lenane Che. | Lebelo la Motor, Lebelo le Butle Sebaka le Nako ea ho Khutlisa | Feme Ea kamehla | E ka fetoha |
| 9.1 | Bula Lebelo | 80% | 50% ho isa ho 125% |
| 9.2 | Koala Lebelo | 70% | 50% ho isa ho 125% |
| 9.3 | Bula le ho Koala Butle Lebelo | 50% | 25% ho isa ho 65% |
| 9.4 | Bula Slow Speed Area | 4 | 1 ho ea ho 12 |
| 9.5 | Koala Slow Speed Area | 5 | 1 ho ea ho 12 |
| 9.6 | Emisa ho Fetola tieho | 0.4 metsotsoana | Metsotsoana e 0.2 ho isa ho e 2.5 |
| 9.7 | Etsoa |
Kamora ho fetola lebelo le bulehileng, lebelo le haufi kapa lebelo le liehang, i-Learn e tlameha ho etsoa hape.
- Bula le ho Koala Lebelo
Sena se beha lebelo leo heke e tla tsamaea ka lona. Haeba heke e tsamaea ka potlako haholo fokotsa boleng bona. - Butle Lebelo
Sena se beha lebelo leo heke e tla tsamaea ka lona sebakeng sa lebelo le liehang. Haeba heke e tsamaea butle haholo eketsa boleng bona. - Slow Speed Area
Sena se beha sebaka sa ho tsamaea butle ka lebelo. Haeba u batla nako e eketsehileng ea ho tsamaea bakeng sa sebaka sa lebelo le liehang eketsa boleng bona. - Thibelo Stop Reverse Delay Time
Sena se beha nako ea ho emisa le ho khutlisa morao ha heke e thula tšitiso.
| Lenane Che. | Anti-Jam kapa Braking ea elektroniki | Feme Ea kamehla | E ka fetoha |
| 10.1 | Bula Anti-Jam | TLOA | Metsotsoana e 0.1 ho isa ho e 2.0 |
| 10.2 | Koala Anti-Jam | TLOA | Metsotsoana e 0.1 ho isa ho e 2.0 |
| 10.3 | Braking ea elektroniki | TLOA | E tima/E butswe |
| 10.4 | Motsamao oa Heke Ka mor'a Tšitiso ka Tsela ea ho Bula | Ema | Emisa / Khutlela morao bakeng sa metsotsoana e 2 / Khutlela ka Botlalo |
| 10.5 | Heke Movement Ka mor'a Tšitiso ka Tsela e Koala | Khutlela morao ka metsotsoana e 2 | Emisa / Khutlela morao bakeng sa metsotsoana e 2 / Khutlela ka Botlalo |
| 10.6 | Etsoa |
- Enjene Bula 'me Koala Anti-Jam
Ha heke e bulehile ka ho feletseng kapa e koetsoe ka ho feletseng, tšobotsi ena e sebetsa ka reverse voltage ka nako e khuts'oane haholo. E tla thibela enjene hore e se ke ea koala heke kahoo ho bonolo ho tlosa li-motors bakeng sa ts'ebetso ea matsoho. - Braking ea elektroniki
Sena se tla emisa li-motors ka brake ea elektroniki. Brake e sebelisoa ha tšitiso e bonoa kapa ha Stop input e qala. - Tataiso ea ho Bula : Motsamao oa Heke ka mor'a Tšitiso
Ka mor'a hore ho be le tšitiso tseleng e bulang, heke e tla ema, e khutlele morao ka metsotsoana e 2 kapa e furalle ka ho feletseng. - Tataiso e Koala : Motsamao oa Heke Ka mor'a Tšitiso
Ka mor'a hore ho be le tšitiso e haufi, heke e tla ema, e khutlise morao ka metsotsoana e 2 kapa e furalle ka ho feletseng.
Menu 11 – i-Learning
Sebopeho sena se u lumella ho etsa thuto e bohlale ea maeto a heke. Latela melaetsa e ho LCD ho phethela thuto.
Lenane la 12 - Password
Sena se tla lumella mosebelisi ho kenya phasewete ho thibela basebelisi ba sa lumelloeng ho kena litlhophisong tsa karete ea taolo. Mosebedisi o lokela ho hopola phasewete. Mokhoa o le mong feela oa ho seta phasewete e lahlehileng ke ho khutlisetsa karete ea taolo ho Elsema.
Ho phumula phasewete, kgetha Menu 12.2 ebe o tobetsa Master Control.
Lenane la 13 - Litlaleho tsa Ts'ebetso
Sena ke sa tlhahisoleseding feela.
| Lenane Che. | Ts'ebetso Litlaleho |
| 13.1 | Nalane ea Ketsahalo, ho fihla liketsahalong tse 100 tse tlalehiloeng mohopolong |
| 13.2 | E bonts'a Ts'ebetso ea Liheke le Maemo a Currents |
| 13.3 | Seta Botjha Lirekoto tse Phahameng tsa Hona Joale |
| 13.4 | Etsoa |
- Nalane ea Ketsahalo
Nalane ea ketsahalo e tla boloka liketsahalo tse 100. Liketsahalo tse latelang li ngotsoe mohopolong: Power On, Low Battery, All input activations, Ho Bula ka Katleho, Ho Koala ka Katleho, Thibelo e Lemohuoe, Teko e sa Atlehang ea ho Ithuta, Factory Reset, DC Output overload, AC Supply Restored, AC Supply Restored, Auto Close, Security Close Ob. - E bonts'a Ts'ebetso ea Liheke le Maemo a Hona Joale
Sena se bonts'a palo ea lipotoloho tse bulehileng, lipotoloho tse haufi, lipotoloho tsa batsamai, litšitiso tse bulehileng, litšitiso tse haufi le maemo a hona joale a makoloi. Boleng ba boleng ba hajoale bo ka hlophisoa bocha ke mosebelisi ho tsoa ho Menu 13.3.
Lenane la 14 - Lisebelisoa
| Lenane Che. | Lisebelisoa |
| 14.1 | Mofuta oa Battery: Lithium-ion kapa Lead Acid Betri |
| 14.2 | Beha Phepelo Voltage: 12 kapa 24 Volts |
| 14.3 | Seta Selaoli bocha ho Litlhophiso tsa Feme |
| 14.4 | Litlhaloso tsa Teko |
| 14.5 | Nako ea ho Tsamaea bakeng sa Slip Clutch Motors |
| 14.6 | Solar Gate Mode : E ntlafatsa Karete ea Taolo bakeng sa Lisebelisoa tsa Solar |
| 14.7 | Mofuta oa Fuse: 10 kapa 15 Amps
E ntlafatsa Karete ea Taolo bakeng sa Fuse e nepahetseng ea Blade e sebelisitsoeng |
| 14.8 | Slow Speed Ramp Nako e tlase |
| 14.9 | Magnetic Limit Switch |
| 14.10 | Etsoa |
- Mofuta oa Leshala
MCS e ka sebelisoa ka mefuta e 2 ea libeteri tsa bekapo, Lead Acid & Lithium-ion. Litlhophiso tsa kamehla ke Lead Acid. Le ka mohla u se ke ua hokela betri ea lithium ha ho khethoa mofuta oa lead acid. Kamehla khetha mofuta o nepahetseng oa betri. Sebelisa libetri tsa Lithium-ion tse fanoeng ke Elsema feela. - Beha Phepelo Voltage
Karete ea taolo e seta ka bo eona matla a phepelotage nakong ea ho seta. Khetho ena e u lumella ho beha karete ea taolo ho 12 kapa 24 Volt. Ho sebelisa karete ea taolo ts'ebetsong ea letsatsi o tlameha ho seta molumo o nepahetsengtage ho Lisebelisoa. Sena se tla tima "automatic vol".tage sensing e ka bakang mathata lits'ebetsong tsa letsatsi. - Resets Controller
Seta bocha li-setting tsohle hore e be tsa kamehla tsa feme. E boetse e tlosa password. - Litlhaloso tsa Teko
Sena se o lumella ho lekola lisebelisoa tsohle tsa kantle tse hokahaneng le likenyelletso tsa balaoli. UPPERCASE e bolela hore ho kenya ho kentswe tshebetsong mme mongolo o monyane o bolela hore ho kenya ho kentswe tshebetsong. - Nako ea ho Tsamaea bakeng sa Slip Clutch Motors
Sena se o nolofalletsa ho sebelisa molaoli ka nako ea maeto. E sebelisoa bakeng sa Slip clutch kapa Hydraulic Motors - Slow Speed Ramp Nako e tlase
Sena se o nolofalletsa ho fetola nako eo e nkang heke ho fetola lebelo la eona ho tloha ka potlako ho ea ho butle. - Magnetic Limit Switch
Lumella khetho ena feela ha u sebelisa Elsema's magnetic Limit Switch.
LCD Pontšo E Hlalositsoe
| Boemo ba Heke | Tlhaloso |
| Heke E Buletsoe | Heke e sebakeng se bulehileng ka botlalo |
| Heke E Koetsoe | Heke e sebakeng se haufi ka ho feletseng |
| Heke E Ema | Heke e emisitsoe ke e 'ngoe ea lisebelisoa kapa remote control |
| Tšitiso e fumanwe | Karete ea ho laola e utloile tšitiso |
| Moedi Switch Boemo | Tlhaloso |
| M1OpnLmON | Motor 1 Open limit switch e BUTSE |
| M1ClsLmON | Motor 1 Close limit switch E BUTSE |
| Boemo ba ho Kena | Tlhaloso |
| Bula | Kentswe e butsweng e kentswe tshebetsong |
| Cls ON | Koala e kentsweng tshebetsong |
| Stp ON | Stop input e kentswe tshebetsong |
| PE ON | Photo Beam input e kentswe tshebetsong |
| PB ON | Kentswe ya Push Button e kentswe tshebetsong |
| PED TSOHLE | Kenyelletso ya Batsamai ka maoto e kentswe tshebetsong |
Tataiso ea tharollo ea mathata
Nakong ea i-Learn, heke e tla bula le ho koala makhetlo a 3. Potoloho ea pele e tsamaea butle. Potoloho ea bobeli e lebelo le potlakileng. Potoloho ea boraro e tla ba ka lebelo le potlakileng empa heke e tla fokotseha pele e fihla qetellong.
| Phoso nakong ea i-Learn | Pheko |
| i-Learn e tsitsitse ho 14% | Fokotsa M1 Slow Speed Obstruction Margin (Menu 8.3) |
| i-Learn e tsitsitse ho 28% | Fokotsa M1 Open Obstruction Margin (Menu 8.1) |
| Heke ha e bulehe ka botlalo kapa ha e koalehe ka botlalo saekeleng ea 1 ea i-Learn | Eketsa M1 Slow Speed Obstruction Margin (Menu 8.3) |
| Heke ha e bulehe ka botlalo kapa ha e koalehe ka botlalo saekeleng ea 2 ea i-Learn | Eketsa M1 Tsela e Buleng kapa e Koale ea Thibelo (Menu 8.1 & 8.2) |
| Limit switch e hlolehile ho ngodisa mme heke ha e so butswe kapa ha e koetswe ka botlalo. | Bakeng sa potoloho ea 1. Eketsa M1 Slow Speed Obstruction Margin (Menu 8.3) .Bakeng sa 2nd & 3rd cycle. Eketsa M1 Tsela e Buleng kapa e Koale ea Thibelo (Menu 8.1 & 8.2) |
| Limit switch e hlolehile ho ngodisa mme heke e butswe ka botlalo kapa e kwetswe. | Boemo ba phetoho ea moeli ha boa nepahala. Keiti e fihlile ho sethibelo sa 'mele kapa ke sebaka se phahameng sa ho tsamaea pele switch ea moeli e ka buloa. |
| Phoso nakong ea Ts'ebetso | Pheko |
| Heke ha e bulehe kapa ha e koalehe ka botlalo empa LCD e re "Heke e Butsoe" kapa "Heke e koetsoe". | Eketsa M1 Slow Speed Obstruction Margin (Menu 8.3) |
| LCD e re "Obstruction detected" ha ho na tšitiso. | Eketsa M1 Tsela e Buleng kapa e Koale ea Thibelo (Menu 8.1 & 8.2) |
| Heke ha e arabele li-remote kapa mohloli ofe kapa ofe oa lehae. | Sheba LCD bakeng sa boemo ba Kenyeletso (sheba leqephe le fetileng). Haeba tlhahiso efe kapa efe e kentswe tshebetsong mme e tshwarwa e sebetsa, karete e ke ke ya arabela taelo efe kapa efe e nngwe. |
Lisebelisoa
Libetri tsa bekapo le tjhaja ea betri
Karete ea taolo e na le tjhaja e hahelletsoeng bakeng sa libeteri tsa bekapo. Hokela libetri ho theminale ea betri feela 'me tjhaja e tla tjhaja betri ka bo yona. Elsema e na le mefuta e mengata ea boholo ba betri.
Lisebelisoa tsa Solar
Elsema e na le lisebelisoa tsa taolo ea liheke tsa letsatsi, liphanele tsa letsatsi, lijaja tsa letsatsi le basebelisi ba liheke tse felletseng tsa letsatsi.
TLHOKOMELO
Ho sebelisa karete ea taolo ts'ebetsong ea letsatsi o tlameha ho seta molumo o nepahetsengtage kenya ho Tools Menu (16.2). Sena se tla tima "automatic vol".tage sensing e ka bakang mathata lits'ebetsong tsa letsatsi.
Li-Inductive Loops le Li-Loop Detector tse entsoeng esale pele
Elsema e na le mefuta e mengata ea li-loops tsa Saw-Cut le Direct Burial. Li entsoe esale pele ka boholo bo khothalelitsoeng ba loop bakeng sa lits'ebetso tsa khoebo kapa tsa lapeng mme li etsa hore ho kenngoe kapele le ho be bonolo.
Wireless Bump Strip
Sebaka sa tšireletso se kentsoeng keiting e tsamaeang kapa mokoallo hammoho le transmitter. Ha heke e otla tšitiso, mochine o fetisang molaetsa o fetisetsa lets'oao la mohala ho moamoheli ho emisa heke ho baka tšenyo e eketsehileng.
Keyring Remotes
Li-remote tsa morao-rao tsa PentaFOB® li netefatsa hore liheke kapa mamati a hau a sireletsehile. Etela www.elsema.com bakeng sa lintlha tse ling.
Lenaneo la PentaFOB®
Eketsa, fetola, 'me u hlakole lirimoutu tsa PentaFOB® memoring ea moamoheli. Moamoheli a ka boela a sireletsoa ka password hore a se ke a kena ka ntle ho tumello.
Booster bakeng sa li-remoutu tsa PentaFOB®
Penta Repeater e ka eketsa mefuta ea ts'ebetso ea li-remote tsa keyring ho fihla ho 500 metres.
Mabone a Khanyang
Elsema e na le mabone a 'maloa a benyang ho sebetsa joalo ka temoso ha heke kapa mamati a sebetsa. 
Litaelo tsa Lenaneo la PentaFOB®
- Tobetsa 'me u tšoare konopo ea lenaneo ho moamoheli o hahelletsoeng ka hare (Sheba setšoantšo sa khokahano ea MCS)
- Tobetsa konopo ea remoutu bakeng sa metsotsoana e 2 ha u ntse u tšoere konopo ea lenaneo ho moamoheli
- Receiver LED e tla benya ebe e fetola Botala
- Tlosa konopo ho moamoheli
- Tobetsa konopo ea remote control ho leka tlhahiso ea moamoheli
Ho Hlakola Memori ea Baamoheli
Khutlisa li-pin tsa "Code Reset" ho moamoheli bakeng sa metsotsoana e 10. Sena se tla hlakola li-remoutu tsohle memoring ea moamoheli.
Lenaneo la PentaFOB®
Lenaneo lena le u lumella ho kenya le ho hlakola li-remoutu tse itseng memoring ea moamoheli. Sena se sebelisoa ha remote control e lahlehile kapa mohiri a tloha sebakeng seo 'me mong'a ntlo a batla ho thibela ho kena ntle le tumello.
PentaFOB® Backup Chips
Chip ena e sebelisetsoa ho boloka kapa ho khutlisetsa litaba tsa moamoheli. Ha ho e-na le li-remoutu tse 100 tse hlophisitsoeng ho moamoheli, ka tloaelo sesebelisoa se boloka memori ea moamoheli haeba moamoheli a ka senyeha.
- ELSEMA PTY LTD
- 31 Tarlington Place Smithfield NSW 2164 Australia
- EA-02-9609 4668
- www.elsema.com
Litokomane / Lisebelisoa
 |
ELSEMA MCS Motor Controller e le Mong [pdf] Buka ea Taelo MCS, MCSv2, MCS Motor Controller a le Mong, MCS, Motor Controller a le Mong, Controller a le Mong, a le Mong |
