Elprotronic MSP430 Flash Programmer

Tlhahisoleseding ya Sehlahiswa

• MSP430 Flash Programmer ke sesebelisoa sa software se entsoeng ke Elprotronic Inc. bakeng sa ho etsa mananeo a MSP430 microcontrollers.
• Software e na le laesense mme e ka sebelisoa feela kapa ea kopitsoa ho latela lipehelo tsa laesense e joalo.
• Sesebediswa sena se dumellana le Karolo ya 15 ya Melao ya FCC mme se lekilwe mme sa fumanwa se dumellana le meedi ya sesebediswa sa Dijithale sa Sehlopha sa B.
• Elprotronic Inc. ha e nke boikarabello bakeng sa liphoso leha e le life kapa tse sieo boitsebisong bo teng tokomaneng.
• Sehlahisoa ha sea lokela ho sebelisoa le adaptara ea mananeo (hardware) eo e seng sehlahisoa sa Elprotronic Inc.

Litaelo tsa Tšebeliso ea Sehlahisoa

1. Kenya software ea MSP430 Flash Programmer khomphuteng ea hau.
2. Hokela microcontroller ea hau ea MSP430 komporong ea hau u sebelisa adaptara e loketseng ea mananeo.
3. Qala software ea MSP430 Flash Programmer.
4. Khetha litlhophiso tse nepahetseng bakeng sa microcontroller ea hau le adapta ea mananeo.
5. Kenya lenaneo kapa firmware eo u lakatsang ho e kenya ho microcontroller ea hau ho software ea MSP430 Flash Programmer.
6. Rulaganya microcontroller ea hau u sebelisa software ea MSP430 Flash Programmer.

Hlokomela:
Ho bohlokoa ho latela litaelo tse fanoeng bukeng ea mosebelisi ka hloko le ho sebelisa sehlahisoa feela joalo ka ha se reretsoe ho qoba tšenyo kapa kotsi.

Litlhaloso tsa likarolo tsa Elprotronic Inc.

• 16 Crossroads Drive Richmond Hill, Ontario, L4E-5C9 CANADA
• Web sebaka: www.elprotronic.com.
• E-mail: info@elprotronic.com
• Fax: 905-780-2414
• Lentsoe: 905-780-5789

Copyright

Copyright © Elprotronic Inc. Litokelo tsohle li sirelelitsoe

Boitlhaloso:
Ha ho karolo ea tokomane ena e ka hlahisoang bocha ntle le tumello e ngotsoeng pele ho Elprotronic Inc. Lintlha tse tokomaneng ena li ka fetoha ntle le tsebiso 'me ha li emele boitlamo karolong efe kapa efe ea Elprotronic Inc. e nepahetseng, Elprotronic Inc. ha e nke boikarabello bakeng sa liphoso leha e le life kapa lintho tse sieo.

Ha ho ketsahalo eo Elprotronic Inc, basebeletsi ba eona kapa bangoli ba tokomane ena ba tla ikarabella bakeng sa tšenyo e khethehileng, e tobileng, e sa tobang, kapa ea litlamorao, tahlehelo, litjeo, litefello, likopo, likopo, likopo tsa phaello e lahlehileng, litefiso, kapa litšenyehelo tsa mofuta ofe kapa ofe kapa mosa.
Software e hlalositsoeng tokomaneng ena e fanoe ka tlas'a laesense 'me e ka sebelisoa feela kapa ea kopitsoa ho latela lipehelo tsa laesense e joalo. Boitlhotlhollo ba litiisetso: Ua lumela hore Elprotronic Inc. ha ea u fa litiisetso tse tobileng mabapi le software, hardware, firmware le litokomane tse amanang le tsona. Software, hardware, firmware le litokomane tse amanang le tsona li fuoa uena "JOALOKAHA E LE" ntle le tiisetso kapa tšehetso ea mofuta ofe kapa ofe. Elprotronic Inc. e hanela ditiisetso tsohle mabapi le software, tse hlahiswang kapa tse hlahiswang, ho kenyeletswa, ntle le moedi, ditiisetso tsa ho sebetsa hantle bakeng sa morero o itseng, thekiso, boleng ba thekiso kapa ho se tlole ditokelo tsa batho ba bang.

Moedi wa melato: Ha ho ketsahalo e tla ba le boikarabelo ho Elprotronic Inc. bakeng sa tahlehelo efe kapa efe ya tshebediso, tshitiso ya kgwebo, kapa tshenyo efe kapa efe e tobileng, e sa tobang, e ikgethang kapa ya ditlamorao tsa mofuta ofe kapa ofe (ho kenyeletswa le phaello e lahlehileng) ho sa tsotelehe mofuta wa ketso. ebang ke ka konteraka, tort (ho kenyeletsoa bohlasoa), molato o tiileng oa sehlahisoa kapa ho seng joalo, leha Elprotronic Inc. e lemositsoe ka monyetla oa ts'enyehelo e joalo.

QETELA TUMELLANO YA LAesense ya MOSEBETSI

KA KOPO U BALA TOKOMANE ENA KA KELELLO PELE U SEBELISA SOFTWARE LE SEBELISO SA TŠEBELETSO TSE AMANG. ELPROTRONIC INC. LE/OR BATHO BA HONA (“ELPROTRONIC”) E IKUTLOA HO U FEELA LATENSE EA SOFTWARE JOALOKA MOTHO KA MONG, Khamphani, KAPA MOTHO OA MOLAO O TLA BE HO SEBELISA SOFTWARE (E BOTSOANG KA TLASE E LE “WENA” KAPA “HA HAO FEELA”) KA MAEMO A HORE U LUMELLANA LE MELAO YOHLE YA TUMELLANO ENA YA LAesense. ENA KE KONELLA EA MOLAO LE E SEBETSANG PAKENG TSA HAO LE ELPROTRONIC. KA HO BULA PACKAGE ENA, HO NYATSOA TIISO, HO TLANYA KONONO EA "KE A ARAMA" KAPA HO HLAKGANG HO BONTŠA TUMELO KA MOTLHAKAMELO, KAPA HO LAEA SOFTWARE O LUMELLANA LE MELAO LE MAEMO A TUMELLANO ENA. HAEBA U SA LUMELLANE LE MELAO LE MAEMO ENA, TLANYA KUNETHO EA “HA KE LUMELLE” KAPA HOSE HO BJA BJA BOTSA HO HANA, U SE KE UA SEBELISA SEHLAHISO SE FELETSENG HAPE 'ME U SE BUSE KA BOHLAKO BA HO REKA HO MOREKI EO E FUMANENG HO MOHOLO. MO MATSATSI A MASHOME A MANE (30) A HO REKA MME MADI A HAO A TLA BUSELWA.

Laesense.
Software, firmware le litokomane tse amanang le tsona (ka kakaretso "Sehlahisoa") ke thepa ea Elprotronic kapa bafani ba eona ba laesense 'me e sirelelitsoe ke molao oa litokelo. Ha Elprotronic e ntse e tsoela pele ho ba mong'a Sehlahisoa, U tla ba le litokelo tse itseng tsa ho sebelisa Sehlahisoa ka mor'a hore u amohele laesense ena. Laesense ena e laola lintlafatso life kapa life, lintlafatso, kapa lintlafatso ho Sehlahisoa seo Elprotronic e ka u fang sona. Litokelo le boitlamo ba hau mabapi le tšebeliso ea Sehlahisoa sena ke tse latelang:

U KA:

• sebelisa Sehlahisoa sena lik'homphieutha tse ngata;
• etsa kopi e le 'ngoe ea software molemong oa ho boloka litlaleho, kapa kopitsa software ho hard disk ea komporo ea hau ebe u boloka ea mantlha molemong oa ho boloka litlaleho;
• sebelisa software ho netweke

U KA SE KE UA:

• lengolo-tsoibila, moenjiniere oa morao-rao, qhala, qhaqholla, fetola, fetolela, etsa boiteko bofe kapa bofe ba ho sibolla Mohloli oa Khoutu ea Sehlahisoa; kapa ho theha mesebetsi e tsoang ho Sehlahisoa;
• abela bocha, kaofela kapa ka karolo, karolo efe kapa efe ea software ea Sehlahisoa sena;
• sebelisa software ena ka adaptara ea mananeo (hardware) eo e seng sehlahisoa sa Elprotronic Inc.

Copyright
Litokelo tsohle, sehlooho, le litokelo tsa litokelo tsa sehlahiswa le ho Sehlahiswa le likopi life kapa life tsa Sehlahiswa ke tsa Elprotronic. Sehlahisoa se sirelelitsoe ke melao ea litokelo tsa molao le litumellano tsa tumellano ea machaba. Ka hona, o tlameha ho tšoara Sehlahisoa joalo ka lintho tse ling tse nang le litokelo tsa molao.

Moedi wa melato.
Ho hang ha ho na Elprotronic e tla ikarabella ho uena bakeng sa tahlehelo efe kapa efe ea ts'ebeliso, tšitiso ea khoebo, kapa ts'enyehelo efe kapa efe e tobileng, e sa tobang, e khethehileng, ea tšohanyetso kapa ea mofuta ofe kapa ofe (ho kenyeletsoa le phaello e lahlehileng) ho sa tsotelehe mofuta oa ts'ebetso ebang ke konteraka, tort. (ho kenyeletsoa bohlasoa), melato e tiileng ea sehlahisoa kapa ho seng joalo, leha Elprotronic e elelitsoe ka monyetla oa tšenyo e joalo.

TS'ELISO TIISETSO.
Ua lumela hore Elprotronic ha e fane ka litiisetso tse tobileng ho Uena mabapi le software, hardware, firmware le litokomane tse amanang. Software, hardware, firmware le litokomane tse amanang le tsona li fuoa uena "JOALOKAHA E LE" ntle le tiisetso kapa tšehetso ea mofuta ofe kapa ofe. Elprotronic ha e fane ka litiisetso tsohle mabapi le software le hardware, tse hlalosang kapa tse boleloang, ho kenyelletsa, ntle le moeli, litiisetso leha e le life tse fanoang tsa ho phela hantle bakeng sa morero o itseng, khoebo, boleng ba thekiso kapa ho se tlōle molao oa litokelo tsa batho ba bang.

TLHOKOMELO FCC

Sesebelisoa sena se lumellana le Karolo ea 15 ea Melao ea FCC.

Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

1. sesebelisoa sena se ka 'na sa baka tšitiso e kotsi le
2. sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

HLOKOMELA:
Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea lisebelisoa tsa digital tsa Sehlopha sa B, ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela bukana ea litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ho kamohelo ea seea-le-moea kapa ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e 'ngoe ea mehato e latelang:

• Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng
• Eketsa karohano pakeng tsa thepa le moamoheli
• Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona
• Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.

Tlhokomeliso:
Liphetoho kapa lintlafatso tse sa amoheloang ka kotloloho ke Elprotronic Inc. li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.

Sesebediswa sena sa dijithale sa Sehlopha sa B se fihlela ditlhoko tsohle tsa Melaoana ea Melawana ea Lisebelisuoa tse Bakang Tšitiso ea Canada.

Mofetoleli oa FlashPro430 Command Line

FlashPro430 Multi-FPA API-DLL e ka sebelisoa le khetla ea toloko ea mola oa taelo. Khetla ena e u lumella ho sebelisa Command Prompt e tloaelehileng lifensetere kapa script files ho etsa mesebetsi ea API-DLL. Sheba FlashPro430 Multi-FPA API-DLL User's Guide ( PM010A05) bakeng sa litlhaloso tse qaqileng tsa mesebetsi ea API-DLL.

Ha sephutheloana se tloaelehileng sa software se kentsoe joale tsohle lia hlokahala files li fumaneha bukeng

• C: \ Lenaneo Files\Elprotronic\MSP430\USB FlashPro430\CMD-line

mme e na le

• FP430-commandline.exe -> mofetoleli oa khetla ea taelo
• MSP430FPA.dll -> API-DLL e tloaelehileng files
• MSP430FPA1.dll -> —-,,,,,——–
• MSPlist.ini -> ho qala file

Tsohle API-DLL files e lokela ho ba bukeng e le 'ngoe moo FP430-commandline.exe e leng teng. Ho qala mofetoleli oa mola oa taelo, FP430-commandline.exe e lokela ho etsoa.

Taelo ea Syntax:

instruction_name ( paramethara1, paramethara2, .... ) paramethara:

1. khoele ( file lebitso joalo-joalo) - "filelebitso”
2. lipalo
   • palo e feletseng ya decimal mohlala. 24
   • kapa palo e felletseng ea hex mohlala. 0x18

Hlokomela: Libaka ha li hlokomolohuoe

Litaelo ha li nahanele maemo

• F_OpenInstancesAndFPAs( “*# *” )
• le f_openinstancesandfpas( “*# *” ) lia tšoana

Example-1:

Matha faele ea FP430-commandline.exe

Mofuta:
F_OpenInstancesAndFPAs( “*# *” ) // bula maemo 'me u fumane adaptara ea pele (leha e le efe SN) Tobetsa ENTER – sephetho ->1 (OK)

Mofuta:
F_Initialization () //initialization ka config e nkiloeng ho config.ini//setup e nkiloeng ho FlashPro430 - ka mofuta o hlalositsoeng oa MSP430, khoutu. file etc.

• Tobetsa ENTER – sephetho ->1 (OK)

Mofuta:

F_AutoProgram ( 0 )
Tobetsa ENTER – sephetho ->1 (OK)

Mofuta:

F_Report_Molaetsa()
Tobetsa ENTER - sephetho -> ho bonts'a molaetsa oa ho qetela oa tlaleho (ho tsoa ho F_Autoprogram(0))

Sheba setšoantšo sa A-1 bakeng sa sephetho:

Tlanya quit() ebe o tobetsa ENTER ho koala lenaneo la FP430-commandline.exe.

Example-2:
Matha FP430-commandline.exe 'me u thaepe litaelo tse latelang:

• F_OpenInstancesAndFPAs( “*# *”) // bula maemo 'me u fumane adaptara ea pele (SN leha e le efe)
• F_Initialization()
• F_Report_Molaetsa()
• F_ConfigFileMojaro(“filelebitso") //beha tsela ea vald le config file lebitso
• F_ReadCodeFile( 1, “FileLebitso”) //put vald path le code file lebitso (TI.txt sebopeho)
• F_AutoProgram ( 0 )
• F_Report_Molaetsa()
• F_Put_Byte_to_Buffer( 0x8000, 0x11 )
• F_Put_Byte_to_Buffer( 0x8001, 0x21 )
• F_Put_Byte_to_Buffer( 0x801F, 0xA6 )
• F_Open_Target_Device()
• F_Segment_Erase( 0x8000 )
• F_Copy_Buffer_to_Flash( 0x8000, 0x20 )
• F_Copy_Flash_to_Buffer( 0x8000, 0x20 )
• F_Get_Byte_from_Buffer( 0x8000 )
• F_Get_Byte_from_Buffer( 0x8001 )
• F_Get_Byte_from_Buffer( 0x801F )
• F_Close_Target_Device() tlohela()

Lethathamo la litaelo tsa mola oa taelo

• tlohela (); koala lenaneo la toloko la taelo
• help(); lethathamo la bonts'a ka tlase
• F_Trace_ON()
• F_Trace_OFF()
• F_OpenInstances( che )
• F_CloseInstances()
• F_OpenInstancesAndFPAs(“FileLebitso”)
• F_Set_FPA_index( fpa )
• F_Get_FPA_index()
• F_LastStatus( fpa )
• F_DLLTTypeVer()
• F_Multi_DLLTTypeVer()
• F_Check_FPA_access(index)
• F_Get_FPA_SN( fpa )
• F_APIDLL_Directory(“APIDLLpath”)
• F_Initialization()
• F_DispSetup()
• F_Koala_Kaofela()
• F_Power_Target( OnOff)
• F_Reset_Target()
• F_Report_Molaetsa()
• F_ReadCodeFile( file_fomate, “FileLebitso”)
• F_Get_CodeCS( dest )
• F_ReadPasswFile( file_fomate, “FileLebitso”)
• F_ConfigFileMojaro(“filelebitso")
• F_SetConfig( index, data)
• F_GetConfig( index)
• F_Put_Byte_to_Buffer( tlatsetso, data)
• F_Copy_Buffer_to_Flash( start_addr, size)
• F_Copy_Flash_to_Buffer( start_addr, size)
• F_Copy_All_Flash_to_Buffer()
• F_Get_Byte_from_Buffer( adr)
• F_GetReportMessageChar( index)
• F_Clr_Code_Buffer()
• F_Put_Byte_to_Code_Buffer( adr, data)
• F_Put_Byte_to_Password_Buffer( addr, data)
• F_Get_Byte_from_Code_Buffer( adr)
• F_Get_Byte_from_Password_Buffer( adr)
• F_AutoProgram ( 0 )
• F_VerifyFuseOrPassword()
• F_Memory_Erase( mokhoa)
• F_Memory_Check_Check()
• F_Memory_Write( mode )
• F_Memory_Verify( mode )
• F_Open_Target_Device()
• F_Close_Target_Device()
• F_Segment_Erase( address)
• F_Sectors_Blank_Check( start_addr, stop_addr )
• F_Blow_Fuse()
• F_Write_Word(addr, data)
• F_Read_Word( addr)
• F_Write_Byte( addr, data)
• F_Read_Byte( addr)
• F_Copy_Buffer_to_RAM( start_addr, size)
• F_Copy_RAM_to_Buffer( start_addr, size)
• F_Set_PC_and_RUN( PC_addr )
• F_Synch_CPU_JTAG()
• F_Get_Targets_Vcc()

Hlokomela:
Ha se litaelo tsohle tse thathamisitsoeng Khaolong ea 4 tse kenngoeng tšebetsong ho toloko ea mola oa taelo. Bakeng sa mohlalaample - litaelo tsohle tse sebelisang litsupa ha li sebelisoe, leha ho le joalo, sena ha se thibele phihlello ea likarolo tsohle tsa API-DLL, hobane litaelo tsohle tse sebelisang litsupa li kengoa ts'ebetsong hape ka tsela e bonolo ntle le lintlha.

Litokomane / Lisebelisoa

Elprotronic MSP430 Flash Programmer [pdf] Bukana ea Mosebelisi MSP430 Flash Programmer, MSP430, Flash Programmer, Programmer

Litšupiso

• Bukana ea Mosebelisi