Dragino PB01 LoRaWAN Push Button User Manual

PB01 — LoRaWAN Push Button User Manual
ho qetela e fetotsoe ke Xiaoling
on 2024/07/05 09:53

Litaba pata

1 Selelekela

2 Mokhoa oa ts'ebetso

3 Lokisa PB01 ka taelo ea AT kapa LoRaWAN downlink

4 Battery & Mokhoa oa ho fetola

5 Tlhaiso-leseling

6 Packing Info

7 Tšehetso

8 Boitsebiso ba litšupiso

9 Tlhokomeliso ea FCC

10 Litokomane / Lisebelisoa

10.1 Litšupiso

Selelekela

1.1 Ke eng PB01 LoRaWAN Push Konopo
PB01 LoRaWAN Push Button ke sesebelisoa sa mohala sa LoRaWAN se nang le konopo e le 'ngoe feela. Hang ha mosebelisi a tobetsa konopo, PB01 e tla fetisetsa lets'oao ho seva sa IoT ka protocol ea waelese ea Long Range LoRaWAN. PB01 e boetse e utloa mocheso oa tikoloho le mongobo 'me e tla boela e hokela lintlha tsena ho IoT Server.
PB01 e ts'ehetsa libeteri tse 2 x AAA mme e sebetsa nako e telele ho isa ho lilemo tse 'maloa*. Mosebelisi a ka fetola libeteri habonolo ha li felile.
PB01 e na le sebui se hahelletsoeng kahare, se ka bitsa maemeli a molumo o fapaneng ha o tobetsa konopo mme o fumana karabo ho tsoa ho seva. Sebui se ka tima haeba mosebelisi a se batla.
PB01 e lumellana ka botlalo le protocol ea LoRaWAN v1.0.3, e ka sebetsa ka tsela e tloaelehileng ea LoRaWAN.
*Bophelo ba betri bo ipapisitse le hore na o romella data hangata hakae, ka kopo bona sehlahlobi sa betri.
1.2 Likarolo

Lebota le Attahang.

LoRaWAN v1.0.3 Protocol ea Sehlopha sa A.
1 x konopo ea tobetsa. Mebala e fapaneng e teng.

Sensara ya Mocheso le Mongobo e ahilweng ka hare
Sebui se ahiloeng

Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
AT Commands ho fetola liparamente

Litlhophiso tsa tlhophiso ea hole ka LoRaWAN Downlink
Firmware e ka ntlafatsoa ka port port

Tšehetsa 2 x AAA LR03 libetri.
Boemo ba IP: IP52

1.3 Tlhaloso
Sensor ea Mocheso e Ahelletsoeng ka hare:

Qeto: 0.01 °C

Mamello e Nepahetseng: Mofuta ±0.2 °C
Nako e telele ea ho khanna: <0.03 °C / selemo

Sebaka sa Ts'ebetso: -10 ~ 50 °C kapa -40 ~ 60 °C (ho ipapisitse le mofuta oa betri, bona FAQ)

Sensor e Hahelletsoeng ka Mongobo:

Qeto: 0.01 %RH
Mamello e nepahetseng: Mofuta ± 1.8 %RH

Nako e telele ea ho khanna: <0.2% RH / selemo
Sebaka sa Ts'ebetso: 0 ~ 99.0 %RH(ha ho phoka)

1.4 Tšebeliso ea Matla
PB01 : Ho se sebetse: 5uA, Phetiso: max 110mA
1.5 Polokelo le Mocheso oa Ts'ebetso
-10 ~ 50 °C kapa -40 ~ 60 °C (ho itšetlehile ka mofuta oa betri, bona FAQ)
1.6 Likopo

Mehaho e Bohlale le Boiketsetso ba Lehae

Tsamaiso ea Thepa le Phepelo
Smart Metering

Temo e Bohlale
Smart Cities

Smart Feme

Mokhoa oa ts'ebetso

2.1 E sebetsa joang?
PB01 e 'ngoe le e 'ngoe e romelloa ka sete e ikhethang lefatšeng ka bophara ea linotlolo tsa LoRaWAN OTAA. Ho sebelisa PB01 ho netweke ea LoRaWAN, mosebelisi o hloka ho kenya linotlolo tsa OTAA ho seva sa marang-rang sa LoRaWAN. Ka mor'a sena, haeba PB01 e le tlas'a tšireletso ea marang-rang ea LoRaWAN, PB01 e ka kena marang-rang a LoRaWAN 'me ea qala ho fetisetsa data ea sensor. Nako ea kamehla bakeng sa uplink ka 'ngoe ke metsotso e 20.
2.2 Mokhoa oa ho kenya tšebetsong PB01 joang?

Bula sebaka se katlase.
Kenya 2 x AAA LR03 libeteri 'me node e kene tšebetsong.
Tlas'a maemo a ka holimo, basebelisi ba ka boela ba tsosolosa node ka ho tobetsa konopo ea ACT nako e telele.

Mosebelisi a ka sheba Boemo ba LED ho tseba boemo ba ho sebetsa ba PB01.
2.3 Example ho kena marang-rang a LoRaWAN
Karolo ena e bontša example bakeng sa mokhoa oa ho ikopanya le TheThingsNetwork Seva ea LoRaWAN IoT. Ts'ebeliso le li-server tse ling tsa LoRaWAN IoT ke tsa ts'ebetso e ts'oanang.
Nka hore LPS8v2 e se e hlophiselitsoe ho hokela ho marang-rang a TTN V3 . Re hloka ho kenya sesebelisoa sa PB01 ho portal ea TTN V3.

Mohato oa 1: Theha sesebelisoa ho TTN V3 ka linotlolo tsa OTAA ho tsoa ho PB01.
PB01 e 'ngoe le e 'ngoe e romelloa ka setikara se nang le DEV EUI ea kamehla e le ka tlase:

Kenya linotlolo tsena ho portal ea LoRaWAN Server. Ka tlase ke setšoantšo sa skrini sa TTN V3:
Etsa kopo.
khetha ho theha sesebelisoa ka letsoho.
Kenya JoinEUI(AppEUI), DevEUI, AppKey.

Mokhoa oa kamehla oa OTAA
Mohato oa 2: Sebelisa konopo ea ACT ho kenya PB01 'me e tla ikamahanya le marang-rang a TTN V3. Kamora katleho ea ho kopanya, e tla qala ho kenya data ea sensor ho TTN V3 mme mosebelisi a ka e bona phanele.

2.4 Uplink Payload
Litefiso tsa Uplink li kenyelletsa mefuta e 'meli: Boleng bo nepahetseng ba Sensor le taelo e' ngoe ea maemo / taolo.

Boleng bo nepahetseng ba Sensoro: Sebelisa FPORT=2
Taelo e 'ngoe ea taolo: Sebelisa FPORT ntle le 2.

2.4.1 Uplink FPORT=5, Boemo ba Sesebelisoa
Basebelisi ba ka fumana boemo ba Sesebelisoa uplink ka taelo ea downlink:
Khokahano e tlase: 0x2601
Hokela sesebediswa ho lokisa le FPORT=5.

Boholo (li-byte)	1	2	1	1	2
Boleng	Mohlala oa Sensor	Mofuta oa Firmware	Frequency Band	Sehlopha se senyenyane	BATHO

ExampLe Payload (FPort=5):
Mohlala oa Sensor: Bakeng sa PB01, boleng bona ke 0x35.
Firmware Version: 0x0100, E bolela: v1.0.0 version.
Frequency Band:
*0x01: EU868
*0x02: US915
*0x03: IN865
*0x04: AU915
*0x05: KZ865
*0x06: RU864
*0x07: AS923
*0x08: AS923-1
*0x09: AS923-2
*0x0a: AS923-3
Sehlopha se senyenyane: boleng 0x00 ~ 0x08(feela bakeng sa CN470, AU915,US915. Tse ling ke0x00)
BAT: e bonts'a matla a betritage bakeng sa PB01.
Ex1: 0x0C DE = 3294mV

2.4.2 Uplink FPORT=2, boleng ba sensor ea nako ea sebele
PB01 e tla romella sehokelo sena ka mor'a hore Device Status uplink hang ha e kena marang-rang a LoRaWAN ka katleho. 'Me nako le nako e tla romella uplink ena. Nako ea kamehla ke metsotso e 20 'me e ka fetoloa.
Uplink e sebelisa FPORT=2 'me metsotso e meng le e meng e 20 e romella sehokelo se le seng ka boiketsetso.

Boholo (li-byte)	2	1	1	2	2
Boleng	Betri	Sound_ACK & Sound_key	Alamo	Mocheso	Mongobo

Example Payload (FPort=2): 0C EA 03 01 01 11 02 A8
Betri:
Sheba matla a betritage.

Ex1: 0x0CEA = 3306mV
Ex2: 0x0D08 = 3336mV

Sound_ACK & Sound_key:
Molumo oa senotlolo le molumo oa ACK li lumelloa ka mokhoa oa kamehla.

Example1:0x03
Sound_ACK: (03>>1) & 0x01=1, BULA.
Sound_key: 03 & 0x01=1, BULA.
Example2:0x01
Sound_ACK: (01>>1) & 0x01=0, CLOSE.
Sound_key: 01 & 0x01=1, BULA.

Alamo:
Alamo ea senotlolo.

Ex1: 0x01 & 0x01=1, TRUE.
Ex2: 0x00 & 0x01=0, LESHANO.

Mocheso:

Example1: 0x0111/10=27.3℃
Example2: (0xFF0D-65536)/10=-24.3℃

Haeba mojaro oa moputso ke: FF0D : (FF0D & 8000 == 1), temp = (FF0D – 65536)/100 =-24.3℃
(FF0D & 8000: Ahlola hore na karolo e phahameng ka ho fetisisa ke 1, ha karolo e phahameng ka ho fetisisa e le 1, e fosahetse)
Mongobo:

Humidity: 0x02A8/10=68.0%

2.4.3 Uplink FPORT=3, boleng ba sensor ea datalog
PB01 e boloka boleng ba sensor mme mosebelisi a ka fumana boleng bona ba nalane ka taelo ea downlink. Boleng ba sensor ea datalog bo romelloa ka FPORT=3.

Ntho e 'ngoe le e 'ngoe e kentsoeng ke li-byte tse 11, ho boloka nako ea moea le betri, PB01 e tla romela max byte ho latela lihlopha tsa hona joale tsa DR le Frequency.

Bakeng sa mohlalaample, ka sehlopha sa US915, moputso o moholo oa litefiso tse fapaneng tsa DR ke:

DR0: boholo ke li-byte tse 11 kahoo keno e le 'ngoe ea data

DR1: max ke 53 byte kahoo lisebelisoa li tla kenya lintlha tse 4 tsa data (kakaretso ea 44 byte)
DR2: moputso o felletseng o kenyelletsa lintlha tse 11 tsa data
DR3: moputso o felletseng o kenyelletsa lintlha tse 22 tsa data.

Tlhokomeliso: PB01 e tla boloka 178 sete ea data ea nalane, Haeba sesebelisoa se sena data ka nako ea likhetho.
Sesebelisoa se tla holisa li-byte tse 11 tsa 0.
Sheba lintlha tse ling mabapi le karolo ea Datalog.
2.4.4 Decoder ho TTN V3
Ho protocol ea LoRaWAN, phalliso ea phalliso ke sebopeho sa HEX, mosebelisi o hloka ho eketsa fomate / decoder ea payload ho LoRaWAN Server ho fumana khoele e mosa ho batho.
Ho TTN, eketsa sebopeho ka tlase:

Ka kopo, sheba sehokelo sehokelong sena: https://github.com/dragino/dragino-end-node-decoder
2.5 Bontša data ho Datacake
Sethala sa datacake IoT se fana ka sebopeho sa botsoalle sa batho ho bonts'a data ea sensor ka lichate, hang ha re e-na le data ea sensor ho TTN V3, re ka sebelisa Datacake ho hokahanya le TTN V3 mme re bone data ho Datacake. Mehato e ka tlase ke ena:
Mohato oa 1: Etsa bonnete ba hore sesebelisoa sa hau se hlophisitsoe 'me se hokahane hantle le netweke ea LoRaWAN.
Mohato oa 2: Lokisa Kopo ea hau ho fetisetsa data ho Datacake o tla hloka ho eketsa kopanyo. Eya ho TTN V3
Console -> Likopo -> Likopano -> Eketsa Likopano.

Kenya Datacake:
Khetha konopo ea kamehla e le senotlolo sa ho kena:
Ka har'a console ea Datacake (https://datacake.co/), eketsa PB01:

Ka kopo, sheba setšoantšo se ka tlase.

Kena ho DATACAKE, kopitsa API tlas'a akhaonto.

2.6 Karolo ea Boitsebiso
Ha mosebelisi a batla ho fumana boleng ba sensor, a ka romella taelo ea poll ho tsoa sethaleng sa IoT ho kopa sensor ho romella boleng ka nako e hlokahalang.
2.6.1 Unix TimeStamp
Unix TimeStamp e bontša sampnako e telele ea phalliso ea lihokelo. sebopeho sa motheo ho

Mosebelisi a ka fumana nako ena ho tsoa ho sehokelo: https://www.epochconverter.com/ :
Bakeng sa mohlalaample: haeba Unix Timestamp re na le hex 0x60137afd, re ka e fetolela ho Decimal: 1611889405. ebe re fetolela ho nako: 2021 - Jan - 29 Labohlano 03:03:25 (GMT)

2.6.2 Boleng ba sensor ea likhetho
Mosebelisi a ka khetha boleng ba sensor ho latela nakoamps ho tsoa ho seva. Ka tlase ke taelo ea downlink.
Nakoamp qala le Timestamp Qetella sebelisa Unix TimeStamp sebopeho joalo ka ha ho boletsoe ka holimo. Lisebelisoa li tla arabela ka lintlha tsohle tsa lintlha nakong ena, sebelisa nako ea uplink.
Bakeng sa mohlalaample, taelo ea downlink
E tla sheba 2020/12/1 07:40:00 ho isa 2020/12/1 08:40:00 data
Uplink Internal =5s, ho bolela hore PB01 e tla romella pakete e le 'ngoe ka metsotso e meng le e meng e 5. bolelele ba 5-255s.
2.6.3 Datalog Uplink payload
Sheba Uplink FPORT=3, boleng ba sensor ea datalog
2.7 Konopo

ACT konopo
Tobetsa konopo ena nako e telele PB01 e tla seta bocha ebe e ikopanya le marang-rang hape.
Konopo ea alamo
Tobetsa konopo PB01 hang-hang e tla phahamisa data, 'me alamo ke "NETE".

2.8 Letšoao la LED
PB01 e na le LED e mebala e meraro eo ho bonolo ho e bonts'a mefuta e fapanengtage.
Tšoara lebone le letala la ACT hore le phomole, ebe node e benyang e tala e qala hape, 'mala o moputsoa o benya hang ha o kopa ho fihlella marang-rang, le leseli le lulang le letala bakeng sa metsotsoana ea 5 kamora ho fihlella marang-rang ka katleho.
Boemong bo tloaelehileng ba ho sebetsa:

Ha node e qala bocha, tšoara mabone a ACT GREEN, ebe node e benyang e TALA e qala hape. The BLUE shing hang ha u kopa ho kena marang-rang, le lebone la GREEN le sa khaotseng bakeng sa metsotsoana e 5 ka mor'a ho fumana marang-rang ka katleho.
Nakong ea Kena ea OTAA:
- Bakeng sa sehokelo se seng le se seng sa Join Request uplink: THE GREEN LED e tla benya hang.
- Hang ha U Kena U Atlehile: LED E TLHALA e tla tiea ka metsotsoana e 5.
Kamora ho kopanngoa, bakeng sa sehokelo se seng le se seng, BLUE LED kapa LED e TLANG e tla benya hang.
Tobetsa konopo ea alamo，The RED flashes ho fihlela node e amohela ACK ho tsoa sethaleng 'me lebone la BLUE le lula 5s.

2.9 Buzzer
PB01 e na le molumo oa konopo le molumo oa ACK mme basebelisi ba ka bulela kapa ho tima melumo ka bobeli ka ho sebelisa AT+SOUND.

Molumo oa konopo ke 'mino o hlahisoang ke node ka mor'a hore konopo ea alamo e hatisoe.
Basebelisi ba ka sebelisa AT+OPTION ho seta melumo e fapaneng ea likonopo.
Molumo oa ACK ke molumo oa tsebiso hore node e amohela ACK.

Lokisa PB01 ka taelo ea AT kapa LoRaWAN downlink

Basebelisi ba ka hlophisa PB01 ka AT Command kapa LoRaWAN Downlink.

AT Command Connection: Sheba FAQ.
Litaelo tsa LoRaWAN Downlink bakeng sa li-platform tse fapaneng: IoT LoRaWAN Server

Ho na le mefuta e 'meli ea litaelo tsa ho lokisa PB01, ke:

Litaelo tse akaretsang:

Litaelo tsena ke tsa ho lokisa:

Litlhophiso tse akaretsang tsa sistimi joalo ka: nako ea uplink.
LoRaWAN protocol le litaelo tse amanang le seea-le-moea.

Lia tšoana bakeng sa Lisebelisoa tsohle tsa Dragino tse tšehetsang DLWS-005 LoRaWAN Stack(Note**). Litaelo tsena li ka fumanoa ho wiki: End Device Downlink Command

E laela moralo o khethehileng oa PB01

Litaelo tsena li sebetsa feela bakeng sa PB01, joalo ka tlase:

3.1 "Downlink Command Set".

3.2 Seta Password
Feature: Beha phasewete ea sesebelisoa, palo e phahameng ea linomoro tse 9.
Ka Taelo: AT+PWORD

Laela Example	Mosebetsi	Karabo
KA+PWORD=?	Hlahisa password	123456 OK
AT+PWORD=999999	Beha phasewete	OK

Taelo ea Downlink:
Ha ho taelo ea downlink bakeng sa tšobotsi ena.
3.3 Seta molumo oa konopo le molumo oa ACK
Tšobotsi: Bulela/tima molumo oa konopo le alamo ea ACK.
Ka Taelo: AT+SOUND

Laela Example	Mosebetsi	Karabo
KA+SOMO=?	Fumana boemo ba hajoale ba molumo oa konopo le molumo oa ACK	1,1 OK
HO+SOMO=0,1	Tima molumo oa konopo ebe o bulela molumo oa ACK	OK

Taelo ea Downlink: 0xA1
Sebopeho: Khoutu ea Taelo (0xA1) e lateloa ke boleng ba mokhoa oa 2 bytes.
Byte ea pele kamora 0XA1 e beha molumo oa konopo, 'me byte ea bobeli kamora 0XA1 e beha molumo oa ACK. (0: tima, 1: ho)

Example: Downlink Payload: A10001 // Seta AT+SOUND=0,1 Tima molumo oa konopo ebe o bulela molumo oa ACK.

3.4 Seta mofuta oa 'mino oa buzzer(0~4)
Feature: Seta melumo e fapaneng ea alamo. Ho na le mefuta e mehlano e fapaneng ea 'mino oa likonopo.
Ka Taelo: AT + KHETHA

Laela Example	Mosebetsi	Karabo
HO+KGETHO=?	Fumana mofuta oa 'mino oa buzzer	3 OK
HO+KGETHO=1	Etsa hore 'mino oa buzzer o thaepe 1	OK

Taelo ea Downlink: 0xA3
Sebopeho: Khoutu ea Taelo (0xA3) e lateloa ke boleng ba mokhoa oa 1 byte.

Example: Downlink Payload: A300 // Beha AT+OPTION=0 Beha 'mino oa buzzer hore o thaepe 0.

3.5 Beha Nako e Sebetsang ea Push
Feature: Beha nako ea ho ts'oara hore u tobetse konopo ea alamo ho qoba likhohlano. Boleng bo tloha ho 0 ~ 1000ms.
KA Taelo: KA+STIME

Laela Example	Mosebetsi	Karabo
KA+NAKO=?	Fumana nako ea molumo oa konopo	0 OK
KA+STIME=1000	Beha nako ea molumo oa konopo ho 1000ms	OK

Taelo ea Downlink: 0xA2
Sebopeho: Command Code (0xA2) e lateloa ke 2 bytes mode boleng.

Example: Downlink Payload: A203E8 // Beha AT+STIME=1000

Hlalosa: Tšoara konopo ea alamo bakeng sa metsotsoana ea 10 pele node e romela pakete ea alamo.

Battery & Mokhoa oa ho fetola

4.1 Mofuta oa Betri le ho e khutlisa
PB01 e sebelisa libeteri tse 2 x AAA LR03(1.5v). Haeba libetri li theoha (li bontša 2.1v sethaleng). Basebelisi ba ka reka betri ea AAA e tloaelehileng ebe ba e khutlisa.
Hlokomela:

PB01 ha e na sekurufu, basebelisi ba ka sebelisa sepekere ho e bula bohareng.
Etsa bonnete ba hore tataiso e nepahetse ha u kenya libeteri tsa AAA.

4.2 Tlhahlobo ea Tšebeliso ea Matla
Sehlahisoa se tsamaisoang ke betri ea Dragino kaofela se tsamaisoa ka mokhoa oa Low Power. Re na le sebali sa ntlafatso sa betri se ipapisitseng le tekanyo ea sesebelisoa sa 'nete. Mosebelisi a ka sebelisa khalkhuleita ena ho lekola bophelo ba betri le ho bala bophelo ba betri haeba a batla ho sebelisa nako e fapaneng ea phetisetso.
Litaelo tsa ho sebelisoa ka tsela e latelang:
Mohato oa 1: Kopanya DRAGINO_Battery_Life_Prediction_Table.xlsx ea morao-rao ho tsoa ho: sebali sa betri
Mohato oa 2: E bule ebe u khetha

Mohlala oa Sehlahisoa
Sekhahla sa Uplink

Mokhoa oa ho sebetsa

Mme tebello ya Bophelo maemong a fapaneng e tla bontshwa ka ho le letona.

6.2 AT Command le Downlink
Ho romella ATZ ho tla qala node hape
Ho romella AT + FDR ho tla khutlisetsa node ho litlhophiso tsa feme
Fumana maemo a taelo ea node ea AT ka ho romella AT+CFG
Example:
AT+DEUI=FA 23 45 55 55 55 55 51
AT+APPEUI=FF AA 23 45 42 42 41 11
AT+APPKEY=AC D7 35 81 63 3C B6 05 F5 69 44 99 C1 12 BA 95
AT+DADDR=FFFFFFFF
AT+APPSKEY=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
AT+NWKSKEY=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
AT+ADR=1
AT+TXP=7
HO+DR=5
AT+DCS=0
AT+PNM=1
AT+RX2FQ=869525000
AT+RX2DR=0
AT+RX1DL=5000
AT+RX2DL=6000
AT+JN1DL=5000
AT+JN2DL=6000
AT+NJM=1
AT+NWKID=00 00 00 13
AT+FCU=61
AT+FCD=11
KA+SEPHAPENG=A
HO+NJS=1
AT+RECVB=0:
AT+RECV=
AT+VER=EU868 v1.0.0
AT+CFM=0,7,0
AT+SNR=0
AT+RSSI=0
AT+TDC=1200000
HO+PORT=2
AT+PWORD=123456
HO+CHS=0
AT+RX1WTO=24
AT+RX2WTO=6
HO+DECRYPT=0
AT+RJTDC=20
HO+RPL=0
KA+NAKOAMP=systime= 2024/5/11 01:10:58 (1715389858)
HO+LEAPSEC=18
HO+SYNCMOD=1
HO+SYNCTDC=10
HO+ROBAKA=0
AT+ATDC=1
AT+UUID=003C0C53013259E0
AT+DDETECT=1,1440,2880
AT+SETMAXNBTRANS=1,0
HO+DISFCNTCHECK=0
HO+DISMACANS=0
HO+PNACKMD=0
HO+SOMO=0,0
KA+STIME=0
HO+KGETHO=3
Example:

6.3 Mokhoa oa ho ntlafatsa firmware?
PB01 e hloka converter ea lenaneo ho kenya litšoantšo ho PB01, e sebelisoang ho kenya setšoantšo ho PB01 bakeng sa:

Tšehetsa likarolo tse ncha
Bakeng sa ho lokisa liphoso
Fetola lihlopha tsa LoRaWAN.

Lenaneo la ka hare la PB01 le arotsoe ka bootloader le lenaneo la mosebetsi, ho romella ho kenyelelitsoe bootloader, mosebedisi a ka khetha ho ntlafatsa lenaneo la mosebetsi ka ho toba.
Haeba bootloader e hlakotsoe ka lebaka le itseng, basebelisi ba tla hloka ho jarolla lenaneo la bootloader le lenaneo la mosebetsi.
6.3.1 Apdeita firmware (Nka hore sesebelisoa se na le bootloader)
Mohato oa 1: Hokela UART joalo ka FAQ 6.1
Mohato oa 2: Ntlafatsa latela Taelo bakeng sa ntlafatso ka DraginoSensorManagerUtility.exe.
6.3.2 Apdeita firmware (Nka hore sesebelisoa ha se na bootloader)
Khoasolla ka bobeli lenaneo la boot le lenaneo la basebetsi. Kamora ho ntlafatsa, sesebelisoa se tla ba le bootloader kahoo se ka sebelisa mokhoa o kaholimo ho 6.3.1 ho nchafatsa lenaneo la woke.
Mohato oa 1: Kenya TremoProgrammer pele.
Mohato oa 2: Khokahano ea Hardware
Hokela PC le PB01 ka adaptara ea USB-TTL.
Hlokomela: Ho jarolla firmware ka tsela ena, o hloka ho hula pini ea boot (Program Converter D-pin) holimo ho kenya mokhoa oa ho chesa. Ka mor'a ho chesa, tlosa konopo ea boot ea node le pin ea 3V3 ea adaptara ea USBTTL, 'me u tsosolose node ho tsoa ka mokhoa o tukang.
Khokahano:

USB-TTL GND <–> Program Converter GND pin
USB-TTL RXD <–> Program Converter D+ pin

USB-TTL TXD <–> Program Converter A11 pin
USB-TTL 3V3 <–> Program Converter D- pin

Mohato oa 3: Khetha boema-kepe ba sesebelisoa se tla hokahanngoa, sekhahla sa baud le faele ea bin e tla jarollwa.

Basebedisi ba hloka ho tsosolosa node ho qala ho khoasolla lenaneo.

Kenya betri hape ho seta node bocha

Tšoara konopo ea ACT ho tsosolosa node (sheba 2.7).

Ha sebopeho sena se hlaha, se bontša hore download e phethiloe.

Qetellong, Disconnect Program Converter D-pin, tsosolosa node hape, 'me node e tsoa ka mokhoa o tukang.
6.4 Mokhoa oa ho fetola li-LoRa Frequency Bands/Region?
Mosebelisi a ka latela kenyelletso ea mokhoa oa ho ntlafatsa setšoantšo. Ha u khoasolla litšoantšo, khetha faele e hlokahalang bakeng sa ho khoasolla.
6.5 Hobaneng ke bona mocheso o fapaneng oa ho sebetsa oa sesebelisoa?
Boemo ba mocheso o sebetsang oa sesebelisoa bo itšetlehile ka khetho ea mosebedisi oa betri.

Tloaelehileng AAA Battery e ka tšehetsa -10 ~ 50°C sebaka sa ho sebetsa.
Betri e khethehileng ea AAA e ka tšehetsa -40 ~ 60 °C sebaka sa ho sebetsa. Bakeng sa mohlalaampLe: Energizer L92

Tlhaiso-leseling

7.1 Sesebelisoa sa mantlha
Nomoro ea Karolo: PB01-LW-XX (konopo e tšoeu) / PB01-LR-XX(Konopo e khubelu)
XX : Sehlopha sa kamehla sa frequency

AS923: LoRaWAN AS923 sehlopha
AU915: Sehlopha sa LoRaWAN AU915

EU433: Sehlopha sa LoRaWAN EU433
EU868: Sehlopha sa LoRaWAN EU868
KR920: Sehlopha sa LoRaWAN KR920
US915: Sehlopha sa LoRaWAN US915
IN865: LoRaWAN IN865 sehlopha
CN470: Sehlopha sa LoRaWAN CN470

Packing Info

Sephutheloana se kenyeletsa:

PB01 LoRaWAN Push Konopo x 1

Tšehetso

Ts'ehetso e fanoa ka Mantaha ho isa Labohlano, ho tloha ka 09:00 ho isa 18:00 GMT+8. Ka lebaka la linako tse fapaneng ha re khone ho fana ka ts'ehetso ea bophelo. Leha ho le joalo, lipotso tsa hau li tla arajoa kapele kamoo ho ka khonehang kemisong e boletsoeng pele.
Fana ka lintlha tse ngata kamoo ho ka khonehang mabapi le potso ea hau (mefuta ea lihlahisoa, hlalosa bothata ba hau ka nepo le mehato ea ho bo etsa joalo-joalo) 'me u romelle lengolo ho support@dragino.com.

Boitsebiso ba litšupiso

Letlapa la data, linepe, decoder, firmware

Tlhokomeliso ea FCC

Liphetoho life kapa life tse sa amoheloeng ka kotloloho ke mokha o ikarabellang bakeng sa tumellano li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.
Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e itšetlehile ka maemo a mabeli a latelang:
(1) Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi;
(2) sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.
HLOKOMELA: Thepa ena e lekoa 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela Litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ea seea-le-moea kapa kamohelo ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:

Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
Eketsa karohano pakeng tsa thepa le moamoheli.
Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.

Polelo ea Ts'oaetso ea Mahlaseli a FCC:
Thepa ena e lumellana le meeli ea ho pepeseha ha mahlaseli a FCC e behiloeng bakeng sa tikoloho e sa laoleheng . Thepa ena e lokela ho kenngoa le ho sebetsoa ka sebaka sa bonyane 20cm pakeng tsa radiator le 'mele oa hau.