Dragino PB01 LoRaWAN Push Button User Manual

PB01 — LoRaWAN Push Button User Manual
kawg hloov kho los ntawm Xiaoling
on 2024/07/05 09:53

Cov ntsiab lus zais

1 Taw qhia

2 Hom kev ua haujlwm

3 Configure PB01 ntawm AT hais kom ua lossis LoRaWAN downlink

4 Roj teeb & Yuav hloov li cas

5 Cov ntaub ntawv xaj

6 Cov ntaub ntawv ntim

7 Txhawb nqa

8 Cov ntaub ntawv siv

9 FCC ceeb toom

10 Cov ntaub ntawv / Cov ntaub ntawv

10.1 Cov ntaub ntawv

Taw qhia

1.1 PB01 LoRaWAN Push Button yog dab tsi
PB01 LoRaWAN Push Button yog LoRaWAN wireless ntaus ntawv nrog ib lub laub khawm. Thaum tus neeg siv thawb lub pob, PB01 yuav hloov lub teeb liab mus rau IoT server ntawm Long Range LoRaWAN wireless raws tu qauv. PB01 kuj paub qhov kub thiab av noo ib puag ncig thiab tseem yuav txuas cov ntaub ntawv no mus rau IoT Server.
PB01 txhawb nqa 2 x AAA roj teeb thiab ua haujlwm ntev txog li ob peb xyoos *. Cov neeg siv tuaj yeem hloov cov roj teeb yooj yim tom qab lawv ua tiav.
PB01 muaj ib tug built-in hais lus, nws muaj peev xwm pronouns txawv suab thaum nias khawm thiab tau teb los ntawm server. Tus neeg hais lus tuaj yeem cuam tshuam yog tias tus neeg siv xav tau.
PB01 tau ua tiav nrog LoRaWAN v1.0.3 raws tu qauv, nws tuaj yeem ua haujlwm nrog tus qauv LoRaWAN rooj vag.
* Roj teeb lub neej nyob ntawm seb yuav xa cov ntaub ntawv ntau npaum li cas, thov saib cov roj teeb ntsuas.
1.2 Nta

Phab ntsa Attachable.
LoRaWAN v1.0.3 Class A raws tu qauv.
1 x laub khawm. Txawv Xim muaj.
Built-in Kub & Humidity sensor
Built-in hais lus
Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
AT Commands hloov cov kev txwv
Tej thaj chaw deb configure parameters ntawm LoRaWAN Downlink
Firmware upgradeable ntawm qhov chaw nres nkoj
Txhawb 2 x AAA LR03 roj teeb.
Kev ntsuas tus IP: IP52

1.3 Specification
Built-in Kub Sensor:

Kev daws teeb meem: 0.01 ° C
Kev kam rau ua kom raug: Hom ± 0.2 ° C
Lub Sij Hawm Ntev: <0.03 ° C / xyoo
Kev Ua Haujlwm Ntau Yam: -10 ~ 50 ° C lossis -40 ~ 60 ° C (nyob ntawm hom roj teeb, saib FAQ)

Built-in Humidity Sensor:

Kev daws teeb meem: 0.01% RH
Kev kam rau ua kom raug: Ntaus ± 1.8% RH
Lub Sij Hawm Ntev: <0.2% RH/yr
Kev khiav hauj lwm ntau: 0 ~ 99.0% RH (tsis muaj Dew)

1.4 Kev siv hluav taws xob
PB01: Idle: 5uA, Transmit: max 110mA
1.5 Cia & Ua Haujlwm Kub
-10 ~ 50 ° C lossis -40 ~ 60 ° C (nyob ntawm hom roj teeb, saib FAQ)
1.6 Daim ntawv thov

Smart Buildings & Home Automation
Logistics thiab Supply Chain Management
Kev ntsuas ntse
Ua liaj ua teb ntse
Lub Nroog Ntse
Lub Hoobkas ntse

Hom kev ua haujlwm

2.1 Nws ua haujlwm li cas?
Txhua PB01 raug xa mus nrog cov cim thoob ntiaj teb ntawm LoRaWAN OTAA cov yuam sij. Txhawm rau siv PB01 hauv LoRaWAN network, tus neeg siv yuav tsum nkag mus rau OTAA cov yuam sij hauv LoRaWAN network server. Tom qab no, yog PB01 nyob rau hauv LoRaWAN network kev pab them nqi, PB01 tuaj yeem koom nrog LoRaWAN network thiab pib xa cov ntaub ntawv sensor. Lub sijhawm ua haujlwm rau txhua qhov uplink yog 20 feeb.
2.2 Yuav ua li cas qhib PB01?

Qhib enclosure los ntawm txoj hauj lwm hauv qab no.
Ntxig 2 x AAA LR03 roj teeb thiab lub pob tau qhib.
Raws li cov xwm txheej saum toj no, cov neeg siv kuj tuaj yeem rov qhib lub pob los ntawm kev nias lub pob ACT ntev.

Tus neeg siv tuaj yeem tshawb xyuas LED Status kom paub txog lub xeev ua haujlwm ntawm PB01.
2.3 Ibample koom nrog LoRaWAN network
Tshooj lus no qhia txog tus example kev koom ua ke TheThingsNetwork LoRaWAN IoT server. Kev siv nrog lwm cov LoRaWAN IoT servers yog cov txheej txheem zoo sib xws.
Xav tias LPS8v2 twb tau teeb tsa los txuas rau TTN V3 network . Peb yuav tsum ntxiv PB01 ntaus ntawv hauv TTN V3 portal.

Kauj ruam 1: Tsim ib lub cuab yeej hauv TTN V3 nrog cov yuam sij OTAA los ntawm PB01.
Txhua PB01 raug xa nrog daim ntawv nplaum nrog lub neej ntawd DEV EUI raws li hauv qab no:

Nkag mus rau cov yuam sij no hauv LoRaWAN Server portal. Hauv qab no yog TTN V3 screen txhaj tshuaj:
Tsim daim ntawv thov.
xaiv los tsim cov cuab yeej manually.
Ntxiv JoinEUI(AppEUI), DevEUI, AppKey.

Default hom OTAA
Kauj ruam 2: Siv ACT khawm kom qhib PB01 thiab nws yuav pib koom nrog TTN V3 network. Tom qab koom nrog kev ua tiav, nws yuav pib xa cov ntaub ntawv sensor rau TTN V3 thiab cov neeg siv tuaj yeem pom hauv vaj huam sib luag.

2.4 Uplink Payload
Uplink payloads suav nrog ob hom: Siv tau Sensor Tus nqi thiab lwm yam xwm txheej / tswj cov lus txib.

Siv tau tus nqi Sensor: Siv FPORT = 2
Lwm yam kev tswj hwm: Siv FPORT tsis yog 2.

2.4.1 Uplink FPORT=5, Ntaus xwm txheej
Cov neeg siv tuaj yeem tau txais Cov Khoom Siv Status uplink los ntawm cov lus txib downlink:
Downlink: 0x2601
Uplink lub cuab yeej teeb tsa nrog FPORT = 5.

Qhov Coob (bytes)	1	2	1	1	2
Tus nqi	Sensor Model	Firmware Version	Zaus Band	Sub-band	BAT

Example Payload (FPport=5):
Sensor Model: Rau PB01, tus nqi no yog 0x35.
Firmware Version: 0x0100, Txhais tau tias: v1.0.0 version.
Zaus Band:
0x01: ua 868
0x02: ua 915
0 x03:865
0x04: ua 915
0x05:kz865
0 x06: ru864
0x07: ua 923
0x08: AS 923-1
0x09: AS 923-2
0x0a: AS 923-3
Sub-Band: tus nqi 0x00 ~ 0x08 (tsuas yog rau CN470, AU915, US915. Lwm qhov yog 0x00)
BAT: qhia lub roj teeb voltagrau pb01.
Ex1: 0x0C DE = 3294mV

2.4.2 Uplink FPORT = 2, Real time sensor nqi
PB01 yuav xa qhov uplink no tom qab Ntaus Tus Txheej Txheem uplink ib zaug koom nrog LoRaWAN network ua tiav. Thiab nws yuav ncua sij hawm xa qhov uplink no. Lub sijhawm luv luv yog 20 feeb thiab tuaj yeem hloov pauv.
Uplink siv FPORT = 2 thiab txhua 20 feeb xa ib qho uplink los ntawm lub neej ntawd.

Qhov Coob (bytes)	2	1	1	2	2
Tus nqi	Roj teeb	Sound_ACK & Sound_key	Tswb	Kub	Cov av noo

Example Payload (FPport=2): 0C EA 03 01 01 11 02 A8
Roj teeb:
Xyuas lub roj teeb voltage.

Ex1: 0x0CEA = 3306mV
Ex2: 0x0D08 = 3336mV

Sound_ACK & Sound_key:
Lub suab tseem ceeb thiab ACK suab tau qhib los ntawm lub neej ntawd.

Exampib 1x0
Sound_ACK: (03>>1) & 0x01=1, OPEN.
Sound_key: 03 & 0x01=1, OPEN.
Exampib 2x0
Sound_ACK: (01>>1) & 0x01=0, CLOSE.
Sound_key: 01 & 0x01=1, OPEN.

Tswb:
Lub tswb nrov.

Ex1: 0x01 & 0x01=1, TRUE.
Ex2: 0x00 & 0x01=0, FALSE.

Kub:

Example1: 0x0111/10=27.3℃
Example2: (0xFF0D-65536)/10=-24.3℃

Yog tias them nyiaj yog: FF0D : (FF0D & 8000 == 1), temp = (FF0D - 65536) / 100 = -24.3 ℃
(FF0D & 8000: Txiav txim seb qhov siab tshaj plaws yog 1, thaum qhov siab tshaj plaws yog 1, nws yog qhov tsis zoo)
Humidity:

Humidity: 0x02A8/10=68.0%

2.4.3 Uplink FPORT = 3, Datalog sensor tus nqi
PB01 khaws cov nqi sensor thiab cov neeg siv tuaj yeem khaws cov nqi keeb kwm ntawm cov lus txib downlink. Tus nqi Datalog sensor raug xa los ntawm FPORT = 3.

Txhua cov ntaub ntawv nkag yog 11 bytes, kom txuag tau airtime thiab roj teeb, PB01 yuav xa max bytes raws li DR thiab Frequency bands tam sim no.

Rau example, hauv US915 band, qhov max payload rau txawv DR yog:

DR0: max yog 11 bytes yog li ib qho kev nkag ntawm cov ntaub ntawv
DR1: max yog 53 bytes yog li cov khoom siv yuav upload 4 cov ntaub ntawv nkag (tag nrho 44 bytes)

DR2: tag nrho payload suav nrog 11 cov ntaub ntawv nkag
DR3: tag nrho payload suav nrog 22 cov ntaub ntawv nkag.

Daim ntawv ceeb toom: PB01 yuav txuag tau 178 txheej ntawm cov ntaub ntawv keeb kwm, Yog tias lub cuab yeej tsis muaj cov ntaub ntawv hauv lub sijhawm pov npav.
Ntaus yuav uplink 11 bytes ntawm 0.
Saib cov ntaub ntawv ntxiv txog Datalog feature.
2.4.4 Decoder hauv TTN V3
Nyob rau hauv LoRaWAN raws tu qauv, lub uplink payload yog HEX hom, tus neeg siv yuav tsum tau ntxiv ib tug payload formatter / decoder nyob rau hauv LoRaWAN Server kom tau tib neeg tus phooj ywg txoj hlua.
Hauv TTN, ntxiv formatter raws li hauv qab no:

Thov kos lub decoder los ntawm qhov txuas no: https://github.com/dragino/dragino-end-node-decoder
2.5 Qhia cov ntaub ntawv ntawm Datacake
Datacake IoT platform muab cov tib neeg tus phooj ywg interface los qhia cov ntaub ntawv sensor hauv kab kos, thaum peb muaj cov ntaub ntawv sensor hauv TTN V3, peb tuaj yeem siv Datacake txuas rau TTN V3 thiab pom cov ntaub ntawv hauv Datacake. Hauv qab no yog cov kauj ruam:
Kauj ruam 1: Nco ntsoov tias koj lub cuab yeej tau programmed thiab txuas nrog LoRaWAN network zoo.
Kauj ruam 2: Configure koj daim ntawv thov xa cov ntaub ntawv mus rau Datacake koj yuav tsum tau ntxiv kev koom ua ke. Mus rau TTN V3
Console –> Applications –> Integrations –> Add Integrations.

Ntxiv Datacake:
Xaiv tus yuam sij default li Access Key:
Hauv Datacake console (https://datacake.co/), ntxiv PB01:

Thov saib daim duab hauv qab no.

Nkag mus rau DATACAKE, luam cov API hauv qab tus account.

2.6 Datalog Feature
Thaum tus neeg siv xav khaws tus nqi sensor, nws tuaj yeem xa cov lus nug los ntawm IoT platform kom nug tus sensor xa tus nqi hauv lub sijhawm xav tau.
2.6.1 Unix TimeStamp
Unix TimeStamp qhia sampLub sijhawm ntawm uplink payload. format puag rau

Tus neeg siv tuaj yeem tau txais lub sijhawm no los ntawm qhov txuas: https://www.epochconverter.com/ :
Rau example: yog Unix Timestamp peb tau txais yog hex 0x60137afd, peb tuaj yeem hloov nws mus rau Decimal: 1611889405. thiab tom qab ntawd hloov mus rau lub sijhawm: 2021 - Jan - 29 Friday 03:03:25 (GMT)

2.6.2 Poll sensor tus nqi
Tus neeg siv tuaj yeem xaiv tus nqi sensor raws li lub sijhawmamps los ntawm server. Hauv qab no yog downlink hais kom ua.
Sijhawmamp pib thiab Timestamp kawg siv Unix TimeStamp format raws li hais saum toj no. Cov cuab yeej yuav teb nrog tag nrho cov ntaub ntawv teev tseg nyob rau lub sijhawm no, siv lub sijhawm uplink.
Rau example, downlink command
Yog mus xyuas 2020/12/1 07:40:00 to 2020/12/1 08:40:00's data
Uplink Internal = 5s, txhais tau tias PB01 yuav xa ib pob ntawv txhua 5s. 5-255s.
2.6.3 Datalog Uplink payload
Saib Uplink FPORT=3, Datalog sensor tus nqi
2.7 Khawm

ACT khawm
Ntev nias lub pob no PB01 yuav pib dua thiab koom nrog network dua.
Tswb khawm
Nias lub pob PB01 tam sim ntawd uplink cov ntaub ntawv, thiab tswb yog "TRUE".

2.8 LED Qhov taw qhia
PB01 muaj peb lub xim LED uas yooj yim qhia qhov txawv stage.
Tuav lub teeb ntsuab ACT kom so, tom qab ntawd lub teeb ntsuab ntsuab rov pib dua, lub xiav flashing ib zaug thaum thov kev nkag mus rau lub network, thiab lub teeb ntsuab tas li rau 5 vib nas this tom qab nkag tau zoo hauv network.
Nyob rau hauv ib txwm ua hauj lwm lub xeev:

Thaum lub pob rov pib dua, tuav ACT GREEN teeb, tom qab ntawd GREEN flashing node restarts.Lub BLUE flashing ib zaug thaum thov kev nkag mus rau network, thiab GREEN lub teeb tas li rau 5 vib nas this tom qab nkag tau zoo hauv network.
Thaum OTAA Koom nrog:
- Rau txhua qhov Kev Thov Kev Koom Tes Uplink: GREEN LED yuav ntsais ib zaug.
- Thaum Koom Nrog Ua tiav: GREEN LED yuav ruaj khov rau 5 vib nas this.
Tom qab koom nrog, rau txhua qhov uplink, BLUE LED lossis GREEN LED yuav ntsais ib zaug.
Nias lub tswb khawm, RED flashes kom txog thaum lub pob tau txais ACK los ntawm lub platform thiab lub teeb xiav nyob 5s.

2.9 Buzzer Cov
PB01 muaj lub suab khawm thiab ACK suab thiab cov neeg siv tuaj yeem qhib lossis tawm ob lub suab los ntawm kev siv AT + SOUND.

Lub suab khawm yog lub suab paj nruag tsim los ntawm lub pob tom qab lub tswb nrov yog nias.
Cov neeg siv tuaj yeem siv AT + OPTION los teeb tsa lub suab sib txawv.
ACK suab yog lub suab ceeb toom uas cov node tau txais ACK.

Configure PB01 ntawm AT hais kom ua lossis LoRaWAN downlink

Cov neeg siv tuaj yeem teeb tsa PB01 ntawm AT Command lossis LoRaWAN Downlink.

AT Command Connection: Saib FAQ.
LoRaWAN Downlink cov lus qhia rau ntau lub platform: IoT LoRaWAN Server

Muaj ob hom lus txib kom teeb tsa PB01, lawv yog:

General Commands:

Cov lus txib no yog los teeb tsa:

Kev teeb tsa dav dav xws li: uplink interval.
LoRaWAN raws tu qauv & xov tooj cua hais txog.

Lawv zoo ib yam rau tag nrho cov Dragino Devices uas txhawb DLWS-005 LoRaWAN Stack(Note**). Cov lus txib no tuaj yeem pom nyob rau ntawm wiki: Xaus Device Downlink Command

Commands tshwj xeeb tsim rau PB01

Cov lus txib no tsuas siv tau rau PB01, raws li hauv qab no:

3.1 Downlink Command Set

3.2 Teem Password
Feature: Teem ntaus tus password, max 9 tus lej.
AT Command: AT + PWORD

Hais kom Example	Muaj nuj nqi	Teb
AT + PWORD = ?	Qhia tus password	123456 OK
AT+PWORD = 999999	Teeb tus password	OK

Downlink hais kom ua:
Tsis muaj downlink hais kom ua rau qhov no.
3.3 Teem khawm suab thiab ACK suab
Feature: Qhib / kaw lub suab thiab ACK tswb.
AT Command: AT + SOUND

Hais kom Example	Muaj nuj nqi	Teb
AT + SOUND =?	Tau txais cov xwm txheej tam sim no ntawm lub suab khawm thiab ACK suab	1,1 OK
AT+SOUND = 0,1	Tig lub suab khawm thiab qhib lub suab ACK	OK

Downlink hais kom ua: 0xA1
Hom ntawv: Command Code (0xA1) ua raws li 2 bytes hom nqi.
Thawj byte tom qab 0XA1 teeb tsa lub suab khawm, thiab thib ob byte tom qab 0XA1 teeb tsa lub suab ACK. (0: OFF, 1: rau)

Example: Downlink Payload: A10001 // Teem AT + SOUND = 0,1 Tig lub suab khawm thiab tig rau ACK suab.

3.4 Teeb hom suab paj nruag buzzer (0 ~ 4)
Feature: Teem lub tswb tseem ceeb teb suab.Muaj tsib yam sib txawv ntawm cov suab paj nruag khawm.
AT Command: AT + OPTION

Hais kom Example	Muaj nuj nqi	Teb
AT + OPTION = ?	Tau txais hom suab paj nruag buzzer	3 OK
AT+OPTION=1	Teem lub suab paj nruag buzzer rau hom 1	OK

Downlink hais kom ua: 0xA3
Hom ntawv: Command Code (0xA3) ua raws li 1 byte hom nqi.

Example: Downlink Payload: A300 // Teem AT + OPTION = 0 Teem lub suab paj nruag buzzer los ntaus 0.

3.5 Teem Sijhawm Push Siv Tau
Feature: Teem lub sijhawm tuav rau nias lub tswb kom tsis txhob muaj kev sib cuag tsis raug. Tus nqi ntau ntawm 0 ~ 1000ms.
AT Command: AT + STIME

Hais kom Example	Muaj nuj nqi	Teb
AT+STIME=?	Tau lub suab khawm lub sijhawm	0 OK
AT + STIME = 1000	Teem lub suab khawm lub sijhawm rau 1000ms	OK

Downlink hais kom ua: 0xA2
Hom ntawv: Command Code (0xA2) ua raws li 2 bytes hom nqi.

Example: Downlink Payload: A203E8 // Teem AT+STIME=1000

Piav: Tuav lub tswb pob rau 10 vib nas this ua ntej lub pob yuav xa lub tswb pob.

Roj teeb & Yuav hloov li cas

4.1 Roj teeb hom thiab hloov
PB01 siv 2 x AAA LR03 (1.5v) roj teeb. Yog tias cov roj teeb khiav qis (qhia 2.1v hauv lub platform). Cov neeg siv tuaj yeem yuav generic AAA roj teeb thiab hloov nws.
Nco tseg:

PB01 tsis muaj cov ntsia hlau, cov neeg siv tuaj yeem siv tus ntsia thawv qhib los ntawm nruab nrab.
Xyuas kom tseeb tias cov kev taw qhia yog qhov tseeb thaum nruab AAA roj teeb.

4.2 Kev Ntsuas Kev Siv Hluav Taws Xob
Dragino roj teeb powered khoom yog tag nrho cov khiav hauv Low Power hom. Peb muaj lub tshuab xam zauv roj teeb hloov tshiab uas ua raws li qhov ntsuas ntawm lub cuab yeej tiag. Tus neeg siv tuaj yeem siv lub laij lej no los kuaj xyuas lub roj teeb lub neej thiab suav cov roj teeb lub neej yog tias xav siv lub sijhawm sib txawv.
Kev qhia siv raws li hauv qab no:
Kauj ruam 1: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx los ntawm: roj teeb lub laij lej
Kauj ruam 2: Qhib nws thiab xaiv

Khoom qauv
Uplink Interval
Ua hauj lwm hom

Thiab lub neej expectation nyob rau hauv cov ntaub ntawv sib txawv yuav qhia nyob rau sab xis.

6.2 AT Command thiab Downlink
Xa ATZ yuav reboot lub node
Xa AT + FDR yuav rov qab kho qhov node rau lub Hoobkas teeb tsa
Tau txais cov node's AT hais kom ua los ntawm kev xa AT + CFG
Example:
AT+DEUI = FA 23 45 55 55 55 55 51
AT+APPEUI=FF AA 23 45 42 42 41 11
AT+APPKEY=AC D7 35 81 63 3C B6 05 F5 69 44 99 C1 12 BA 95
AT + DADDR = FFFFFFFF
AT+APPSKEY = FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
AT+NWKSKEY = FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
AT + ADR = 1
AT+TXP = 7
AT+DR = 5
AT + DCS = 0
AT + PNM = 1
AT+RX2FQ = 869525000
AT+RX2DR = 0
AT+RX1DL = 5000
AT+RX2DL = 6000
AT+JN1DL = 5000
AT+JN2DL = 6000
AT+NJM = 1
AT+NWKID=00 00 00 13
AT+FCU = 61
AT + FCD = 11
AT + CLASS = A
AT+NJS = 1
AT + RCVB = 0:
AT + ROV =
AT+VER=EU868 v1.0.0
AT+CFM = 0,7,0
AT + SNR = 0
AT + RSSI = 0
AT+TDC = 1200000 TZS
AT + PORT = 2
AT+PWORD = 123456
AT+CHS = 0
AT+RX1WTO = 24
AT+RX2WTO = 6
AT + DECRYPT = 0
AT+RJTDC = 20
AT + RPL = 0
AT+TIMESTAMP=systime= 2024/5/11 01:10:58 (1715389858)
AT+LEAPSEC = 18
AT+SYNCMOD=1
AT + SYNCTDC = 10
AT+SLEEP=0
AT + ATDC = 1
AT+UID=003C0C53013259E0
AT + DDETECT = 1,1440,2880
AT+SETMAXNBTRANS = 1,0
AT+DISFCNTCHECK=0
AT + DISMACANS = 0
AT + PNACKMD = 0
AT+SOUND = 0,0
AT + STIME = 0
AT+OPTION=3
Example:

6.3 Yuav ua li cas hloov kho lub firmware?
PB01 xav tau ib qho program converter upload duab rau PB01, uas yog siv los upload duab rau PB01 rau:

Txhawb cov yam ntxwv tshiab
Rau bug fix
Hloov LoRaWAN bands.

PB01 qhov kev pab cuam sab hauv tau muab faib ua bootloader thiab kev ua haujlwm, kev xa khoom yog suav nrog bootloader, tus neeg siv tuaj yeem xaiv ncaj qha hloov kho cov haujlwm ua haujlwm.
Yog tias lub bootloader raug tshem tawm vim qee yam, cov neeg siv yuav tsum tau rub tawm cov haujlwm khau raj thiab cov haujlwm ua haujlwm.
6.3.1 Hloov kho firmware (Xav tias ntaus ntawv muaj bootloader)
Kauj ruam 1: Txuas UART raws li FAQ 6.1
Kauj ruam 2: Hloov kho ua raws cov lus qhia kom hloov tshiab ntawm DraginoSensorManagerUtility.exe.
6.3.2 Hloov kho firmware (Xav tias ntaus ntawv tsis muaj bootloader)
Download tau ob qho tib si khau raj thiab cov neeg ua haujlwm program. Tom qab hloov tshiab, ntaus ntawv yuav muaj bootloader yog li siv tau saum toj no 6.3.1 txoj kev hloov tshiab woke program.
Kauj ruam 1: Nruab TremoProgrammer ua ntej.
Kauj ruam 2: Kev sib txuas ntawm Hardware
Txuas PC thiab PB01 ntawm USB-TTL adapter.
Nco tseg: Txhawm rau rub tawm firmware nyob rau hauv txoj kev no, koj yuav tsum rub tus pin khau raj (Program Converter D-pin) siab kom nkag mus rau hom hlawv. Tom qab hlawv, disconnect tus pin khau raj ntawm lub node thiab 3V3 tus pin ntawm USBTTL adapter, thiab rov pib dua lub node kom tawm ntawm qhov hlawv.
Kev sib txuas:

USB-TTL GND <–> Program Converter GND pin
USB-TTL RXD <–> Program Converter D+ pin
USB-TTL TXD <–> Program Converter A11 pin
USB-TTL 3V3 <–> Program Converter D-pin

Kauj ruam 3: Xaiv lub cuab yeej chaw nres nkoj kom txuas, baud tus nqi thiab cov ntaub ntawv rau hauv yuav rub tawm.

Cov neeg siv yuav tsum rov pib dua qhov node kom pib rub tawm qhov program.

Reinstall lub roj teeb kom rov pib dua qhov node
Tuav lub ACT khawm kom rov pib dua lub node (saib 2.7 ).

Thaum no interface tshwm, nws qhia tau hais tias lub download tau tiav lawm.

Thaum kawg, Disconnect Program Converter D-pin, rov pib dua ntawm node, thiab cov node tawm ntawm hom hlawv.
6.4 Yuav hloov LoRa Frequency Bands/Region li cas?
Tus neeg siv tuaj yeem ua raws li cov lus qhia txog yuav ua li cas hloov cov duab. Thaum rub tawm cov duab, xaiv cov duab xav tau rau rub tawm.
6.5 Vim li cas kuv pom qhov sib txawv ua haujlwm kub rau lub cuab yeej?
Qhov ntsuas kub ua haujlwm ntawm cov cuab yeej nyob ntawm tus neeg siv roj teeb xaiv.

Ib txwm AAA roj teeb tuaj yeem txhawb nqa -10 ~ 50 ° C ua haujlwm ntau yam.
AAA roj teeb tshwj xeeb tuaj yeem txhawb nqa -40 ~ 60 ° C ua haujlwm ntau yam. Rau example: Energizer L92

Cov ntaub ntawv xaj

7.1 Main Device
Tus nab npawb: PB01-LW-XX (dawb pob) / PB01-LR-XX (Red Button)
XX: Lub suab nrov zaus

AS923: LoRaWAN AS923 band
AU915: LoRaWAN AU915 band
EU433: LoRaWAN EU433 band
EU868: LoRaWAN EU868 band
KR920: LoRaWAN KR920 band
US915: LoRaWAN US915 band
IN865: LoRaWAN IN865 band
CN470: LoRaWAN CN470 band

Cov ntaub ntawv ntim

Pob muaj xws li:

PB01 LoRaWAN Push Button x 1

Txhawb nqa

Kev them nyiaj yug yog muab hnub Monday txog Friday, thaum 09:00 txog 18:00 GMT+8. Vim muaj ntau lub sijhawm peb tsis tuaj yeem muaj kev txhawb nqa nyob. Txawm li cas los xij, koj cov lus nug yuav raug teb sai li sai tau hauv lub sijhawm ua ntej tau hais.
Muab cov ntaub ntawv ntau li ntau tau txog koj qhov kev nug (cov qauv khoom, qhia meej txog koj qhov teeb meem thiab cov kauj ruam los hloov nws thiab lwm yam) thiab xa ntawv mus rau support@dragino.com.

Cov ntaub ntawv siv

Datasheet, duab, decoder, firmware

FCC ceeb toom

Ib qho kev hloov pauv lossis kev hloov kho uas tsis tau pom zoo los ntawm pawg neeg saib xyuas kev ua raws cai tuaj yeem ua rau tus neeg siv txoj cai los khiav cov khoom siv.
Cov cuab yeej no ua raws li Tshooj 15 ntawm FCC Txoj Cai. Kev ua haujlwm yog ua raws li ob yam hauv qab no:
(1) Cov cuab yeej no yuav tsis ua rau muaj teeb meem cuam tshuam;
(2) cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis zoo.
CEEB TOOM: Cov cuab yeej no tau raug sim thiab pom tias ua raws li cov kev txwv rau Class B cov cuab yeej digital, ua raws li Tshooj 15 ntawm FCC Cov Cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo hauv kev teeb tsa hauv tsev. Cov cuab yeej no tsim, siv thiab tuaj yeem tawg lub zog ntawm xov tooj cua thiab, yog tias tsis tau teeb tsa thiab siv raws li cov lus qhia, yuav ua rau muaj teeb meem cuam tshuam rau kev sib txuas lus hauv xov tooj cua. Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov cuab yeej no ua rau muaj teeb meem cuam tshuam rau lub xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm kev tig cov khoom siv thiab qhib, tus neeg siv tau raug txhawb kom sim kho qhov cuam tshuam los ntawm ib lossis ntau qhov kev ntsuas hauv qab no:

Reorient los yog tshem tawm cov kav hlau txais xov.
Ua kom muaj kev sib cais ntawm cov khoom siv thiab lub receiver.
Txuas cov cuab yeej siv rau hauv qhov hluav taws xob ntawm lub voj voog sib txawv ntawm qhov uas lub receiver txuas nrog.
Nrog rau tus neeg muag khoom lossis tus kws tshaj lij xov tooj cua / TV rau kev pab.

FCC Radiation Exposure Statement:
Cov cuab yeej no ua raws li FCC cov kev txwv tsis pub muaj hluav taws xob tau teeb tsa rau qhov chaw tsis muaj kev tswj hwm .Cov khoom siv no yuav tsum tau nruab thiab ua haujlwm nrog qhov deb tsawg kawg 20cm ntawm lub tshuab hluav taws xob & koj lub cev.