Danfoss VCM 10 Valve e sa Khutleng

Boitsebiso ba Bohlokoa

Tataiso ea Ts'ebeletso e akaretsa litaelo tsa ho harola le ho kopanya VCM 10 le VCM 13 valve e sa khutliseng.

BOHLOKOA:
Ho bohlokoa hore VCM 10 le VCM 13 li sebeletsoe maemong a bohloeki bo phethahetseng.

TLHOKOMELISO:
U se ke ua sebelisa silicone ha u kopanya VCM 10 le VCM 13. U se ke ua sebelisa li-O-rings tse qhetsoeng hape; li ka 'na tsa senyeha. Kamehla sebelisa li-O-ring tse ncha.

Bakeng sa kutloisiso e betere ea VCM 10 le VCM 13, ka kopo sheba karolo view.

Lisebelisoa tse hlokahalang:

• Tšoaea li-ring pliers
• Screwdriver

Ho qhaqholla

1. Kenya VCM10 / VCM 13 ka har'a vice e nang le literei tsa aluminium.
   
2. Fetola CCW ea linate ka lithaelese tsa snap ring.
   
3. Tlosa nate
   
4. Tlosa selemo.
   
5. Tlosa khoune ea valve.
   
6. Tlosa O-ring ho khoune ka screw driver e nyane.
   
7. Tlosa O-ring qetellong ea khoele ea valve e nang le screw driver e nyane.
   

Ho bokellana

1. Lubrication:
   • Ho thibela ho ts'oaroa, tlotsa likhoele ka mofuta oa lubrication oa PTFE.
   • O-ring e ka hare ho VCM 10 / VCM 13 e ka tlotsoa feela ka metsi a hloekileng a Hlophisitsoeng.
   • Li-rings tse qetellong ea khoele li tlameha ho tlotsoa.
   • Ho bohlokoa ho tlotsa likarolo TSOHLE tse lokelang ho kopanngoa ka metsi a hloekileng a tlhotliloeng.
2. Hloekisa O-ring e tlotsitsoeng qetellong ea khoele ea valve.
   
3. Mount metsi lubricated O-ring e ka khoune. Netefatsa hore O-ring e sutumelletsoa ka botlalo ka har'a groove ea O-ring.
   
4. Hloekisa khoune.
   
5. Hloekisa seliba holim'a khoune.
   
6. Lubricate likhoele tsa linate.
   
7. Hlakola nate.
   
8. Tiisa linate ka pliers snap ring.
   
9. Tlotsa likhoele qetellong ea valve.
   

Mosebetsi oa valve ea liteko:
Netefatsa motsamao oa mahala oa li-valve cone.

Lethathamo la likarolo le setšoantšo sa likarolo

Lenane la likarolo tse setseng

Pos.	Qty.	Khethollo	Lintho tse bonahalang	Sete ea tiiso 180H4003
5	1	O-ring 19.20 x 3.00	NBR	x
6	1	O-ring 40.00 x 2.00	NBR	x

Lilemo tse 4 bakeng sa ho hlahloba le ho fapanyetsana li-O-rings ha ho hlokahala.

Danfoss A / S
Lipompo tsa Khatello e Phahameng
Nordborgvej 81
DK-6430 Nordborg
Denmark

Danfoss e ke ke ea amohela boikarabello bakeng sa liphoso tse ka bang teng libukeng tsa libuka, libukana le lintho tse ling tse hatisitsoeng. Danfoss e na le tokelo ea ho fetola lihlahisoa tsa eona ntle le tsebiso. Sena se sebetsa le ho lihlahisoa tse seng li ntse li le teng ka taelo ha feela liphetoho tse joalo li ka etsoa ntle le liphetoho tse nyenyane tse hlokahalang ho latela litlhaloso tse seng li lumellane. Matšoao ohle a thepa ena ke thepa ea lik'hamphani tse amehang. Danfoss le mofuta oa logo ea Danfoss ke matšoao a khoebo a Danfoss A/S. Litokelo tsohle li sirelelitsoe.

Litokomane / Lisebelisoa

Danfoss VCM 10 Valve e sa Khutleng [pdf] Buka ea Taelo VCM 10 Non Return Valve, VCM 10, Non Return Valve, Valve

Litšupiso

• Bukana ea Mosebelisi