Danfoss Kool Prog PC Software

Tlhahisoleseding ya Sehlahiswa

Litlhaloso:

• Sistimi ea Ts'ebetso: Windows 7, Windows 10 (32-bit le 64-bit)
• RAM: 8 GB
• Sebaka sa Hard Drive: 200 GB - 250 GB
• Ho Hlokahala Software: MS Office 2010 le ka holimo
• Sesebelisoa: USB 3.0

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho khoasolla Software:
Kopitsa KoolProgSetup.exe file ho tsoa sebakeng se latelang: http://koolprog.danfoss.com

Litlhoko tsa Sisteme:
Software ena e etselitsoe mosebelisi a le mong mme e hloka lintlha tse latelang tsa sistimi:

• Sistimi ea Ts'ebetso: Windows 7, Windows 10 (32-bit le 64-bit)
• RAM: 8 GB
• Sebaka sa Hard Drive: 200 GB - 250 GB
• Ho Hlokahala Software: MS Office 2010 le ka holimo
• Sesebelisoa: USB 3.0

Hlokomela: Sistimi ea ts'ebetso ea Macintosh ha e sebetse.

Khokahano le Balaoli:
Ha o hokela balaoli, latela mehato ena:

1. Hokela thapo ya USB koung ya USB ya PC.
2. Hokela molaoli ho PC.

TLHOKOMELISO: Netefatsa hore ho hoketsoe molaoli a le mong ka nako efe kapa efe.

Mananeo a Mangata a Balaoli:
Ho bala balaoli ba ERC ba bangata ba sebelisa senotlolo sa EKA:

1. Hokela konopo ea lenaneo la EKA koung ea USB ea PC/laptop.
2. Fetisetsa file ka sebopeho sa .erc ho tloha khomphuteng ho ea ho konopo ea lenaneo.

Bakeng sa litaelo tse qaqileng mabapi le ho fetisa files ho balaoli ba itseng ba ERC, bua ka litokomane tse fanoeng.

LBH:

• P: Ke lokela ho etsa eng haeba ke kopana le temoso ea Tšireletso nakong ea ho kenya?
  A: Tobetsa ho "Kenya software ena ea mokhanni leha ho le joalo" ho tsoela pele ka ho kenya.
• P: Na nka tsamaisa seta ka kotloloho ho tsoa ho seva sa Windows kapa marang-rang file seva?
  A: Ha ho khothalletsoe ho tsamaisa seta ka kotloloho ho tsoa ho seva sa Windows kapa marang-rang file seva.

Selelekela

Ho lokisa le ho leka balaoli ba elektroniki ba Danfoss ha ho mohla ho kileng ha ba bonolo hakana ka software e ncha ea KoolProg PC. Ka software e le 'ngoe ea KoolProg, joale u ka nka advantage ea likarolo tse ncha tse hlakileng joalo ka khetho ea manane a li-parameter tseo u li ratang, ho ngola inthaneteng hammoho le lenaneo le kantle ho marang-rang files, le ho beha leihlo kapa ho etsisa liketsahalo tsa boemo ba alamo. Tsena ke tse ling tsa likarolo tse ncha tse tla fokotsa nako eo R&D le tlhahiso e tla e qeta ho nts'etsopele, ho hlophisa le ho lekola mefuta ea Danfoss ea balaoli ba lihatsetsi tsa khoebo. Lihlahisoa tsa Danfoss tse tšehetsoeng: ETC 1H, ERC 111/112/113, ERC 211/213/214, EKE 1A/B/C, AK-CC55. Litaelo tse latelang li tla u tataisa ha u kenya KoolProg® le tšebeliso ea lekhetlo la pele.

Khoasolla .exe file
Khoasolla KoolProgSetup.exe file ho tloha sebakeng: http://koolprog.danfoss.com

Litlhoko tsa tsamaiso

Software ena e etselitsoe mosebelisi a le mong le litlhoko tsa sistimi tse khothalelitsoeng joalo ka tlase.

OS	Windows 7, Windows 10, 32 bit le 64 bit
RAM	8 GB ea RAM
HD Space	200GB le 250GB
Software e hlokahalang	MS Office 2010 le ho feta
Sehokedi	USB 3.0

Sistimi ea ts'ebetso ea Macintosh ha e sebetse.
Ho tsamaisa seta ka kotloloho ho tsoa ho windows server kapa netweke file seva ha e khothalletsoe.

Ho kenya software

• Tobetsa habeli aekhoneng ea ho seta ea KoolProg®
  Matha wizate ea ho instola 'me u latele litaelo tse skrineng ho phethela kopo ea KoolProg®.

Hlokomela: Haeba u kopana le "temoso ea Tšireletso" nakong ea ho kenya, ka kopo, tobetsa "Kenya software ena ea mokhanni leha ho le joalo".

Khokahano le balaoli

1. Hokela thapo ea USB koung ea USB ea PC
2. Kopanya molaoli.
   TLHOKOMELISO: Ka kopo etsa bonnete ba hore ho hoketsoe molaoli a le mong ka nako efe kapa efe.

Ho fetisa the file ho tloha senotlolo sa EKA ho ea ho molaoli oa ERC:
Setšoantšo sa 2a. Ho fetisetsa ho ERC 11X
Kenya EKA 183A(080G9740) setsing sa boema-kepe (080G9701). Beha molaoli oa ERC 11X seteisheneng sa boema-kepe 'me u se boloke se hatelletse ho fihlela letšoao le atlehileng la lenaneo le fetoha le letala.

Setšoantšo sa 2b. Ho fetisetsa ho ERC 21X:
Kenya EKA 183B (080G9741) boema-kepeng ba TTL ba ERC 21X joalo ka ha ho bonts'itsoe setšoantšong se ka tlase. Tobetsa konopo ho qala phetiso ea file ho tloha EKA 183B ho ea ho ERC21X.

Bakeng sa lintlha tse ling, sheba leqephe la litaelo la EKA 183B(080G9741) le fanoeng ka har'a khiti.

Ho qala lenaneo

Ho fihlella

• Basebelisi ba nang le password ba na le phihlello ea likarolo tsohle.
• Basebelisi ba se nang phasewete ba na le phihlello e fokolang mme ba ka khona ho sebelisa karolo ea 'Copy to controller'.

Beha liparamente

Sesebelisoa sena se u lumella ho hlophisa litlhophiso tsa parametha bakeng sa sesebelisoa sa hau. Tobetsa e 'ngoe ea li-icon tse kholomong e ka ho le letona ho theha tlhophiso e ncha ntle le marang-rang kapa ho kenya li-setting ho tsoa ho molaoli o hokahaneng kapa ho bula projeke e seng e bolokiloe. U ka bona merero eo u seng u e entse tlas'a "Bula litlhophiso tsa morao-rao file”.

E ncha

• Theha morero o mocha ka ho khetha:
  • Mofuta oa taolo
  • Nomoro ea karolo (nomoro ea khoutu)
  • Nomoro ea PV (mofuta oa sehlahisoa).
  • SW (software) phetolelo
• Hang ha u khethile a file, o hloka ho reha morero.
• Tobetsa 'Finish' ho tsoela pele ho view ebe u beha liparamente.

Hlokomela: Ke linomoro tsa khoutu tse tloaelehileng feela tseo u ka khethang ho tsona sebakeng sa "Code Number". Ho sebetsa ntle le marang-rang ka nomoro ea khoutu e sa tloaelehang (nomoro ea khoutu e ikhethileng ea moreki), sebelisa o mong oa mekhoa e 'meli e latelang:

1. Hokela molaoli oa nomoro ea khoutu e tšoanang le KoolProg u sebelisa Gateway, 'me u sebelise "Import setting from Controller" ho etsa tlhophiso. file ho tsoa ho eona.
2. Sebelisa karolo ea "Open" ho bula se seng se bolokiloe sebakeng sa heno file ho PC ea hau ea nomoro ea khoutu 'me u thehe e ncha file ho tsoa ho eona.

E ncha file, e bolokiloeng ho PC ea hau sebakeng sa heno, e ka fumaneha ntle le marang-rang nakong e tlang ntle le ho hokela molaoli.

Kenya litlhophiso ho tsoa ho molaoli
E o lumella ho kenya litlhophiso ho tsoa ho molaoli o hokahaneng ho ea ho KoolProg le ho fetola litlhophiso ntle le inthanete. Khetha "Import setting from controller" ho kenya liparamente tsohle le lintlha tsa eona ho tsoa ho molaoli o hokahaneng ho ea ho PC.

Ka mor'a hore "Import e phethetsoe", boloka litlhophiso tse tsoang linaheng tse ling file ka ho fana ka file lebitso lebokoseng la molaetsa oa pop-up.

Hona joale litlhophiso tsa parameter li ka sebetsoa kantle ho marang-rang 'me li ka ngolloa hape ho molaoli ka ho tobetsa "Export" . Ha o ntse o sebetsa ntle le marang-rang, molaoli o hokahantsoeng o bonts'oa o putsitsoe 'me litekanyetso tse fetotsoeng tsa paramethara ha li ngoloe ho molaoli ho fihlela konopo ea ho romela kantle e tobetsoa.

Bula

Open"taelo e u lumella ho bula litlhophiso filee se e bolokiloe komporong. Hang ha taelo e tobetse, fensetere e tla hlaha ka lethathamo la litlhophiso tse bolokiloeng files.

Merero eohle e bolokiloe mona foldareng: "KoolProg/Configurations" ka ho sa feleng. U ka fetola setšoantšo sa kamehla file ho boloka sebaka ho "Likhetho" .
U ka boela ua bula litlhophiso files o fumane ho tsoa mohloling o mong mme o bolokile foldareng efe kapa efe o sebelisa khetho ea ho bala. Ka kopo hlokomela hore KoolProg e tšehetsa tse ngata file lifomate (xml, cbk) bakeng sa balaoli ba fapaneng. khetha maemo a loketseng file sebopeho sa taolo eo u e sebelisang.

Hlokomela: .erc/.dpf sebopeho fileLitaolo tsa ERC/ETC ha li bonahale mona. A '.erc' kapa '.dpf' file E bolokiloeng ho PC ea hau e ka buloa ka e 'ngoe ea litsela tse latelang:

1. Khetha "Projeke e Ncha" 'me u ee lethathamong la Parameter view ea mohlala oa molaoli o tšoanang. Khetha konopo ea Open ho sheba le ho bula .erc/.dpf file ho PC ea hau.
2. Khetha "Laola ho tsoa ho molaoli" haeba u hokahane le molaoli a le mong inthaneteng 'me u ee lethathamong la paramethara view. Khetha konopo ea Open ho bala tse lakatsehang .erc/.dpf file le view ho KoolProg.
3. Khetha "Bula" ho bula .xml efe kapa efe file ea molaoli ea tšoanang, fihla lenaneng la paramethara view skrineng, 'me moo u khethe Bula konopo ho sheba le ho khetha .erc/ .dpf file ho view 'me u li hlophise files.

Mokhoa oa ho kenya taolong (feela bakeng sa AK-CC55):
Sena se o fa monyetla oa ho kenya mofuta oa taolo (cdf) kantle ho marang-rang le ho hlahisa database ho KoolProg. Sena se tla u lumella ho etsa litlhophiso file offline ntle le ho ba le molaoli ea hokahaneng le KoolProg. KoolProg e ka kenya mofuta oa taolo (cdf file) bolokoa ho PC kapa sesebelisoa leha e le sefe sa polokelo.

Info

Wizate ea ho seta kapele (bakeng sa AK-CC55 feela):
Mosebelisi a ka tsamaisa seta ka potlako kantle ho marang-rang le marang-rang ho theha molaoli bakeng sa ts'ebeliso e hlokahalang pele a fetela ho litlhophiso tse qaqileng tsa paramethara.

Fetolela tlhophiso files (feela bakeng sa AK-CC55):
Mosebedisi a ka fetola tlhophiso files ho tloha ho mofuta oa software ho ea ho mofuta o mong oa software oa mofuta o tšoanang oa taolo. E ka fetolela litlhophiso ho tloha ka litsela tse peli (mofuta o tlase ho isa ho o phahameng oa SW le holimo ho theola mofuta oa SW.

1. Bula litlhophiso file e hlokang ho fetoloa ho KoolProg tlasa "Set parameter".
2. Tobetsa ho fetola maemo .
3. Khetha lebitso la projeke, nomoro ea khoutu le mofuta oa SW oa tlhophiso file e lokelang ho hlahisoa ebe o tobetsa OK.
4. Phahamisa molaetsa o nang le kakaretso ea liparamente tse kentsoeng, tse fetotsoeng le tse tlositsoeng tse bonts'itsoeng qetellong ea phetoho.

Kopitsa ho molaoli

Mona o ka kopitsa litlhophiso files ho molaoli o hokahaneng hammoho le ho ntlafatsa firmware ea taolo. Karolo ea ntlafatso ea firmware e fumaneha feela bakeng sa mofuta o khethiloeng oa molaoli.

Kopitsa maemo files: Khetha boemo file u batla ho etsa lenaneo ka taelo ea "BROWSE".
U ka boloka litlhophiso file ho “Ratoang Files" ka ho tobetsa konopo ea "Set as Favourite". Morero o tla kenyelletsoa lethathamong mme o ka hlahlojoa habonolo hamorao.
(Tobetsa letšoao la lithōle ho tlosa morero lethathamong).

Hang ha u khethile tlhophiso file, lintlha tsa bohlokoa tsa ba khethiloeng file di bontshwa.

Ntlafatso ea firmware (feela bakeng sa AK-CC55):

1. Batla firmware file (Bin file) o batla ho etsa lenaneo, firmware e khethiloeng file lintlha li hlahisoa ka letsohong le letšehali.
2. Haeba firmware e khethiloeng file e lumellana le molaoli o hokahaneng, KoolProg e nolofalletsa konopo ea ho qala mme e tla nchafatsa firmware. Haeba e sa tsamaisane, konopo ea ho qala e lula e holofetse.
3. Kamora ntlafatso e atlehileng ea firmware, molaoli o qala hape mme o bonts'a lintlha tse ntlafalitsoeng tsa molaoli.
4. Karolo ena e ka sireletsoa ka botlalo ka password. Haeba KoolProg e sirelelitsoe ka password, ha u bala firmware file, koolProg e khothaletsa password mme motho a ka kenya firmware file feela ka mor'a ho kenya phasewete e nepahetseng.

Tšebeletso ea inthaneteng

E u lumella ho shebella ts'ebetso ea nako ea 'nete ea molaoli ha e ntse e sebetsa.

• O ka beha leihlo lintho tse kenang le tse hlahisoang.
• O ka hlahisa chate ea mola ho latela litlhophiso tseo u li khethileng.
• U ka hlophisa li-setting ka kotloloho ho molaoli.
• U ka boloka lichate tsa mela le litlhophiso ebe oa li sekaseka.

Dialamo (feela AK-CC55):
Tlas'a "Alarms tab", mosebelisi a ka khona view lialamo tse sebetsang le tsa histori tse teng ho molaoli ka nako stamp.

Boemo ba IO le Phetolelo ea Matsoho:
Mosebelisi a ka fumana chelete hang hangview ea lintho tse kenang le liphetho tse hlophisitsoeng le boemo ba tsona tlasa sehlopha sena. Mosebelisi a ka leka ts'ebetso ea tlhahiso le lithapo tsa motlakase ka ho beha selaolo ho mokhoa oa ho feta le ho laola tlhahiso ka letsoho ka ho li BONA le HO TLOA.

Lichate tsa Mekhoa

Tšehetso ea molaoli e sa tsejoeng

(Ke feela bakeng sa balaoli ba ERC 112 & ERC 113)
Haeba molaoli e mocha a hokahane, database ea eona e seng e sa fumanehe ho KoolProg, o ntse o ka hokela ho molaoli ka mokhoa oa inthaneteng. Khetha "Upload from Controller" ho li-parameter tse behiloeng kapa "Tšebeletso le teko" ho view lenane la paramethara la molaoli o hokahaneng. Likarolo tsohle tse ncha tsa taolo e hokahaneng li tla hlahisoa tlas'a sehlopha se arohaneng sa menu "New Parameters". Mosebelisi a ka hlophisa litlhophiso tsa paramente ea molaoli ea hokahaneng mme a boloka litlhophiso file ho PC ho lenaneo la boima ka ho sebelisa "Programming EKA 183A (Code no. 080G9740)".
Hlokomela: tlhophiso e bolokiloeng file e entsoeng ka tsela ena e ke ke ea buloa hape ho KoolProg.

Ka kopo ikopanye le moemeli oa hau oa thekiso ea haufi bakeng sa thuso e eketsehileng.

Danfoss e ke ke ea amohela boikarabello bakeng sa liphoso tse ka bang teng libukeng tsa libuka, libukana le lintho tse ling tse hatisitsoeng. Danfoss e na le tokelo ya ho fetola dihlahiswa tsa yona ntle le tsebiso.Sena se sebetsa le ho dihlahiswa tse seng di ntse di le teng ka tatellano ha feela diphetoho tse jwalo di ka etswa ntle le hore ho be le diphetoho tse latelang tse hlokehang ka dintlha tse seng di dumelletswe.
Matšoao ohle a thepa ena ke thepa ea lik'hamphani tse amehang. Danfoss le mofuta oa logo ea Danfoss ke matšoao a khoebo a Danfoss A/S. Litokelo tsohle li sirelelitsoe.

http://koolprog.danfoss.com

Litokomane / Lisebelisoa

Danfoss Kool Prog PC Software [pdf] Bukana ea Mosebelisi Kool Prog PC Software, Kool Prog PC Software, Prog PC Software, PC Software, Software

Litšupiso

• Bukana ea Mosebelisi