Danfoss Kool Prog PC Software

Cov ntaub ntawv khoom

Specifications:

• Operating Systems: Windows 7, Windows 10 (32-ntsis thiab 64-ntsis)
• RAM: 8 GB
• Hard Drive Chaw: 200 GB - 250 GB
• Yuav tsum tau Software: MS Office 2010 thiab siab dua
• Interface: USB 3.0

Cov lus qhia siv khoom

Download tau lub software:
Download tau KoolProgSetup.exe file los ntawm qhov chaw hauv qab no: http://koolprog.danfoss.com

System Requirements:
Cov software no yog npaj rau ib tus neeg siv thiab xav tau cov txheej txheem hauv qab no:

• Operating Systems: Windows 7, Windows 10 (32-ntsis thiab 64-ntsis)
• RAM: 8 GB
• Hard Drive Chaw: 200 GB - 250 GB
• Yuav tsum tau Software: MS Office 2010 thiab siab dua
• Interface: USB 3.0

Nco tseg: Macintosh operating system tsis txaus siab.

Kev sib txuas nrog Controllers:
Thaum txuas controllers, ua raws li cov kauj ruam no:

1. Txuas lub USB cable rau PC lub USB chaw nres nkoj.
2. Txuas tus maub los rau PC.

CEEB TOOM: Xyuas kom tseeb tias tsuas yog ib tus maub los txuas nrog txhua lub sijhawm.

Mass Programming ntawm Controllers:
Txhawm rau ua haujlwm loj ERC cov tswj hwm siv tus yuam sij EKA:

1. Txuas tus yuam sij EKA programming mus rau USB chaw nres nkoj ntawm PC/laptop.
2. Hloov cov file nyob rau hauv .erc hom los ntawm lub computer mus rau lub programming yuam sij.

Rau cov lus qhia ntxaws txog kev hloov files rau cov tswj ERC tshwj xeeb, xa mus rau cov ntaub ntawv muab.

FAQ:

• Q: Kuv yuav ua li cas yog tias kuv ntsib kev ceeb toom kev ruaj ntseg thaum lub sijhawm teeb tsa?
  A: Nyem rau ntawm "Nruab no tsav tsheb software lawm" mus txuas ntxiv nrog lub installation.
• Q: Kuv puas tuaj yeem khiav qhov teeb tsa ncaj qha los ntawm Windows server lossis network file server?
  A: Nws tsis pom zoo kom khiav qhov teeb tsa ncaj qha los ntawm Windows server lossis network file server.

Taw qhia

Configuring thiab sim Danfoss electronic controllers yeej tsis tau yooj yim npaum li nrog tus tshiab KoolProg PC software. Nrog rau ib qho KoolProg software, tam sim no koj tuaj yeem nqa advantage ntawm cov tshiab intuitive nta xws li kev xaiv ntawm cov npe tsis nyiam, sau ntawv online thiab offline program files, thiab saib xyuas lossis simulating lub tswb xwm txheej ua haujlwm. Cov no tsuas yog qee qhov ntawm cov yam ntxwv tshiab uas yuav txo qis lub sijhawm R & D thiab ntau lawm yuav siv rau kev txhim kho, kev ua haujlwm, thiab kev sim Danfoss ntau yam ntawm kev lag luam tub yees. Txhawb Danfoss khoom: ETC 1H, ERC 111/112/113, ERC 211/213/214, EKE 1A/B/C, AK-CC55. Cov lus qhia hauv qab no yuav qhia koj txog kev teeb tsa thiab kev siv thawj zaug ntawm KoolProg®.

Download tau .exe file
Download tau KoolProgSetup.exe file los ntawm qhov chaw: http://koolprog.danfoss.com

Cov kev xav tau ntawm qhov system

Cov software no yog npaj rau ib tus neeg siv thiab pom zoo cov kev cai hauv qab no.

OS	Windows 7, Windows 10, 32-ntsis thiab 64-ntsis
RAM	8 GB RAM
HD Chaw	200 GB thiab 250 GB
Yuav tsum tau software	MS Office 2010 thiab siab dua
Interface	USB 3.0

Macintosh operating system tsis txaus siab.
Khiav lub teeb ncaj qha los ntawm windows server lossis network file server tsis pom zoo.

Txhim kho software

• Ob npaug nias rau ntawm KoolProg® teeb icon
  Khiav lub installation wizard thiab ua raws li cov lus qhia onscreen kom tiav KoolProg® installation.

Nco tseg: Yog tias koj ntsib "Kev Ceeb Toom Txog Kev Nyab Xeeb" thaum lub sijhawm teeb tsa, thov nyem rau ntawm "Nruab no tsav tsheb software lawm".

Kev sib txuas nrog cov tswj

1. Txuas USB cable rau PC lub USB chaw nres nkoj
2. Txuas lub maub los.
   CEEB TOOM: Thov xyuas kom meej tias tsuas yog ib tus maub los txuas nrog txhua lub sijhawm.

Hloov cov file los ntawm EKA yuam sij rau ERC maub los:
Fig 2 a. Převod ERC11X na TXK
Ntxig EKA 183A (080G9740) rau hauv chaw nres tsheb docking (080G9701). Muab ERC 11X maub los rau ntawm qhov chaw nres tsheb docking thiab cia nws nias kom txog thaum qhov kev ua tiav qhov ntsuas tau hloov ntsuab.

Fig 2 b. Hloov mus rau ERC 21X:
Ntxig EKA 183B (080G9741) rau hauv TTL chaw nres nkoj ntawm ERC 21X raws li qhia hauv daim duab hauv qab no. Nias lub khawm kom pib hloov ntawm file los ntawm EKA 183B rau ERC21X.

Yog xav paub ntxiv thov mus saib EKA 183B(080G9741) daim ntawv qhia nyob rau hauv cov khoom siv.

Pib qhov kev pab cuam

Kev siv tau

• Cov neeg siv nrog tus password muaj kev nkag mus rau txhua qhov nta.
• Cov neeg siv tsis muaj tus password muaj kev txwv tsis pub nkag thiab tsuas yog tuaj yeem siv 'Copy to controller' feature.

Teem cov parameter

Qhov no feature tso cai rau koj mus configure parameter nqis rau koj daim ntawv thov. Nyem ib qho ntawm cov cim nyob rau sab xis los tsim ib qho tshiab configuration offline los yog ntshuam chaw los ntawm ib qho kev sib txuas los yog qhib qhov project twb tau txais kev cawmdim. Koj tuaj yeem pom cov haujlwm uas koj twb tau tsim nyob rau hauv "Qhib qhov chaw tsis ntev los no file”.

Tshiab

• Tsim qhov project tshiab los ntawm kev xaiv:
  • Hom tswj
  • Tus lej (code number)
  • PV (cov khoom version) tus lej
  • SW (software) version
• Thaum koj tau xaiv ib file, koj yuav tsum sau npe rau qhov project.
• Nyem 'Finish' mus txuas ntxiv mus view thiab teeb parameter.

Nco tseg: Tsuas yog tus lej lej muaj nyob rau xaiv los ntawm hauv "Code Number" teb. Txhawm rau ua haujlwm offline nrog tus lej lej tsis yog tus lej (tus lej lej tshwj xeeb), siv ib qho ntawm ob txoj hauv qab no:

1. Txuas tus maub los ntawm tib tus lej lej nrog KoolProg siv Gateway, thiab siv "Ntshuam chaw los ntawm Controller" los tsim kev teeb tsa file los ntawm nws.
2. Siv "Qhib" feature qhib qhov chaw khaws cia hauv zos uas twb muaj lawm file ntawm koj lub PC ntawm tib tus lej lej thiab tsim ib qho tshiab file los ntawm nws.

Qhov tshiab file, txuag ntawm koj lub PC hauv zos, tuaj yeem nkag mus rau offline yav tom ntej yam tsis tas yuav txuas tus maub los.

Ntshuam chaw los ntawm maub los
Tso cai rau koj los import ib qho kev teeb tsa los ntawm kev sib txuas ntawm tus maub los rau KoolProg thiab hloov kho qhov tsis muaj offline. Xaiv "Ntshuam chaw los ntawm maub los" rau import tag nrho cov tsis thiab nws cov ntsiab lus los ntawm cov kev cob cog rua maub los rau lub PC.

Tom qab "Ntshuam tiav", txuag qhov chaw imported file los ntawm kev muab cov file npe nyob rau hauv lub pop-up message box.

Tam sim no cov kev teeb tsa parameter tuaj yeem ua haujlwm offline thiab tuaj yeem sau rov qab rau tus maub los los ntawm nias "Export" . Thaum ua haujlwm offline, tus maub los txuas tau pom greyed tawm thiab hloov pauv qhov tseem ceeb tsis tau sau rau tus maub los txog thaum nias lub pob export.

Qhib

Qhib" hais kom ua cia koj qhib qhov chaw files twb khaws cia rau hauv lub computer. Thaum cov lus txib raug nyem, lub qhov rais yuav tshwm sim nrog cov npe ntawm qhov chaw khaws cia files.

Txhua qhov haujlwm tau muab khaws cia ntawm no hauv daim nplaub tshev: "KoolProg/Configurations" los ntawm lub neej ntawd. Koj tuaj yeem hloov lub neej ntawd file txuag qhov chaw hauv "Preferences" .
Koj tuaj yeem qhib qhov chaw files koj tau txais los ntawm lwm qhov chaw thiab khaws cia rau hauv ib lub nplaub tshev siv qhov kev xaiv xauj. Thov nco ntsoov tias KoolProg txhawb ntau yam file hom ntawv (xml, cbk) rau cov tswj sib txawv. xaiv qhov chaw tsim nyog file hom ntawv ntawm tus maub los koj siv.

Nco tseg: .erc/.dpf format files ntawm ERC/ETC maub los tsis pom ntawm no. Ib '.erc' lossis '.dpf' file khaws cia rau hauv koj lub PC tuaj yeem qhib rau hauv ib txoj hauv qab no:

1. Xaiv "Tshiab Project" thiab mus tag nrho txoj kev mus rau Parameter daim ntawv teev view ntawm tib tus maub los qauv. Xaiv Qhib khawm mus xauj thiab qhib .erc/.dpf file ntawm koj lub PC.
2. Xaiv "Upload los ntawm cov maub los" yog tias koj txuas nrog tib tus maub los hauv online thiab mus rau cov ntawv teev npe view. Xaiv Qhib khawm mus xauj xav tau .erc/.dpf file thiab view nws hauv KoolProg.
3. Xaiv "Qhib" qhib lwm yam .xml file ntawm tib tus maub los, ncav cuag daim ntawv teev npe view npo, thiab muaj xaiv Qhib khawm kom xauj thiab xaiv .erc/ .dpf file rau view thiab kho cov no files.

Ntshuam maub los qauv (tsuas yog rau AK-CC55):
Qhov no tso cai rau koj los import tus qauv tswj hwm (cdf) offline thiab tsim cov ntaub ntawv hauv KoolProg. Qhov no yuav tso cai rau koj los tsim kev teeb tsa file offline yam tsis muaj tus maub los txuas nrog KoolProg. KoolProg tuaj yeem import tus qauv maub los (cdf file) khaws cia rau PC lossis ib qho chaw cia khoom.

Cov ntaub ntawv

Kev teeb tsa ceev wizard (tsuas yog rau AK-CC55):
Tus neeg siv tuaj yeem khiav qhov teeb tsa ceev ob qho tib si offline thiab online los teeb tsa tus maub los rau daim ntawv thov xav tau ua ntej tsiv mus rau cov ncauj lus kom ntxaws parameter nqis.

Hloov chaw files (tsuas yog rau AK-CC55):
Tus neeg siv tuaj yeem hloov qhov chaw files los ntawm ib qho software version mus rau lwm lub software version ntawm tib hom maub los. Tau hloov chaw los ntawm ob txoj kev (qis mus rau siab dua SW version thiab siab dua rau qis SW version.

1. Qhib qhov chaw file uas yuav tsum tau hloov dua siab tshiab nyob rau hauv KoolProg nyob rau hauv "Teeb parameter".
2. Nyem rau ntawm qhov chaw hloov pauv .
3. Xaiv lub npe qhov project, tus lej lej thiab SW version ntawm qhov chaw file uas yuav tsum tau generated thiab nias OK.
4. Pop up lus nrog cov ntsiab lus ntawm ntxiv, hloov thiab tshem tawm tsis pom nyob rau thaum xaus ntawm conversion.

Luam rau tus maub los

Ntawm no koj tuaj yeem luam qhov chaw files mus rau tus maub los txuas nrog rau kev txhim kho tus maub los firmware. Firmware upgrade feature tsuas yog muaj rau cov qauv xaiv tswj.

Luam qhov chaw files: Xaiv qhov chaw file koj xav kom program nrog "BROWSE" hais kom ua.
Koj tuaj yeem txuag tau qhov chaw file hauv "Favorite Files" los ntawm nias rau ntawm "Teem raws li Nyiam" khawm. Qhov project yuav muab ntxiv rau hauv daim ntawv thiab tuaj yeem ntsuas tau yooj yim tom qab.
(Nyem rau ntawm lub thoob khib nyiab icon tshem tawm ib qhov project ntawm daim ntawv).

Thaum koj tau xaiv qhov chaw file, cov ntsiab lus tseem ceeb ntawm cov xaiv file tso tawm.

firmware upgrade (tsuas yog rau AK-CC55):

1. Xauj lub firmware file (Bin file) koj xav tau program, xaiv firmware file cov ntsiab lus nthuav tawm ntawm sab laug tes.
2. Yog hais tias xaiv firmware file yog sib xws nrog cov maub los txuas nrog, KoolProg ua rau lub pob pib thiab yuav hloov kho lub firmware. Yog tias nws tsis tau sib xws, lub pob pib tseem raug kaw.
3. Tom qab ua tiav firmware hloov tshiab, maub los rov pib dua thiab qhia cov ntsiab lus tshiab ntawm tus maub los.
4. Cov yam ntxwv no tuaj yeem tiv thaiv tag nrho los ntawm tus password. Yog tias KoolProg tiv thaiv tus password, thaum koj xauj lub firmware file, koolProg prompts rau tus password thiab ib tus tuaj yeem thauj cov firmware file tsuas yog tom qab sau tus password kom raug.

Kev pabcuam hauv online

Tso cai rau koj saib xyuas lub sijhawm ua haujlwm ntawm tus maub los thaum nws tab tom khiav.

• Koj tuaj yeem saib xyuas cov khoom siv thiab cov khoom tawm.
• Koj tuaj yeem tso saib cov kab kos raws li qhov koj tau xaiv.
• Koj tuaj yeem teeb tsa kev teeb tsa ncaj qha hauv tus maub los.
• Koj tuaj yeem khaws cov kab kos thiab teeb tsa thiab tom qab ntawd txheeb xyuas lawv.

Tswb (tsuas yog rau AK-CC55):
Hauv qab Alarms tab, tus neeg siv tuaj yeem view cov active thiab keeb kwm tswb tam sim no nyob rau hauv lub maub los nrog lub sij hawm stamp.

IO Status thiab phau ntawv hla dhau:
Tus neeg siv tuaj yeem tau txais ib qho tam sim ntawdview ntawm configured inputs thiab outputs thiab lawv cov xwm txheej nyob rau hauv pawg no. Tus neeg siv tuaj yeem kuaj qhov tso zis muaj nuj nqi thiab hluav taws xob xaim hluav taws xob los ntawm kev tso tus maub los rau hauv phau ntawv override hom thiab tswj cov zis manually los ntawm kev hloov lawv ON thiab OFF.

Cov kab kos

Unknown maub los txhawb

(Tsuas yog rau ERC 112 & ERC 113 maub los)
Yog tias tus tswj hwm tshiab txuas nrog, cov ntaub ntawv uas tsis tau muaj nyob hauv KoolProg, koj tseem tuaj yeem txuas mus rau tus maub los hauv online hom. Xaiv ib qho "Upload from Controller" nyob rau hauv qhov teeb meem los yog "Service and test" rau view parameter daim ntawv teev cov kev sib txuas tswj. Txhua yam tshiab ntawm kev sib txuas ntawm cov maub los yuav raug tso tawm nyob rau hauv pawg zaub mov cais "Tshiab Parameters". Tus neeg siv tuaj yeem hloov kho qhov parameter nqis ntawm kev sib txuas ntawm tus maub los thiab txuag qhov chaw file ntawm PC mus rau qhov kev pab cuam loj siv "Programming EKA 183A (Code no. 080G9740)".
Nco tseg: txuag chaw file tsim los ntawm txoj kev no tsis tuaj yeem rov qhib dua hauv KoolProg.

Thov hu rau koj tus neeg muag khoom ze tshaj plaws rau kev pab ntxiv.

Danfoss tuaj yeem lees txais tsis muaj lub luag haujlwm rau qhov ua yuam kev hauv catalogues, daim ntawv qhia thiab lwm yam khoom luam tawm. Danfoss tseg txoj cai los hloov nws cov khoom yam tsis muaj ntawv ceeb toom.Qhov no kuj tseem siv tau rau cov khoom uas twb tau txiav txim lawm tias cov kev hloov pauv no tuaj yeem ua yam tsis muaj kev hloov pauv tom qab tsim nyog hauv cov ntsiab lus tau pom zoo lawm.
Tag nrho cov cim lag luam hauv cov khoom siv no yog cov cuab yeej ntawm cov tuam txhab uas muag. Danfoss thiab Danfoss logotype yog cov cim lag luam ntawm Danfoss A / S. Txhua txoj cai.

http://koolprog.danfoss.com

Cov ntaub ntawv / Cov ntaub ntawv

Danfoss Kool Prog PC Software [ua pdf] Cov neeg siv phau ntawv qhia Kool Prog PC Software, Kool Prog PC Software, Prog PC Software, PC Software, Software

Cov ntaub ntawv

• Cov neeg siv phau ntawv