Danfoss Filter Drier Shell
Litlhaloso
- Lihatsetsi: CO2 (sistimi e tlase le e bohlokoa haholo)
- Mocheso oa Media: -55 ho 100 °C / -67 ho 212 °F
- Khatello e phahameng ea ho sebetsa (PS/MWP): 90bar / 1305 psig
Moralo
Ho kenya
| Mofuta | L bonyane | |
| [limilimithara] | [ka] | |
| Tlhaloso: DCR048 | 250 | 9.8 |
| Tlhaloso: DCR096 | 400 | 15.8 |
Ela hloko sefi sa sehatsetsing sa metsi ka har'a sistimi kaha se ka baka likhatello tse phahameng haholo tsa kahare ha u futhumala. Etsa bonnete ba hore pompo e theoha hantle pele o tlosa sekoaelo sa DCR Hape ntša metsi a setseng ka sehatsetsing pele o tlosa liboutu tse koahelang.
Brazing
Welding
Mekhoa e metle ea bareki e ntse e tla hlokahala:
- Tlosa kopano ea sekoahelo pele ho brazing / welding.
- U se ke ua tlosa core shaft sekoahelong.
- Brazing/Welding ea manonyeletso e tla etsoa ke welder e netefalitsoeng.
- Li tlohele li pholile.
- Hloekisa sebaka sa brazing / welding ka mor'a ho kenya (tlosa flux e setseng ka borashe).
- Ena ke ts'ebetso ea bohlokoa 'me e hloka ho etsoa ka hloko e kholo ho tlosa phallo eohle e setseng.
- Sebaka se ka ntle se na le seaparo sa TLP (Zink) ho sireletsa kutu, leha ho le joalo re khothalletsa ho penta DCR ka mor'a ho kenya ts'ireletso e kholo ea ho senya.
- Ka mor'a brazing / welding sebelisa ho roala ho loketseng holim'a sehokelo ho qoba mafome leha e le afe tšimong.
Gasket
Se ke oa kenya DCR ho kenya pele Brazing / welding
Hlokomela: Netefatsa hore ho khethiloe gasket ea sekoahelo se holimo bakeng sa DCR
U se ke ua sebelisa gasket hape
Se ke oa sebelisa Oli / Mafura ho Gasket
Mokhoa oa ho tiisa liboutu
| DCR Bolts M12*1.75 | |
| Mohato oa 1 | Ho tiisa menoana liboutu tsohle |
| Mohato oa 2 | 10 Nm/7.4 lbf.ft |
| Mohato oa 3 | 20 Nm/15 lbf.ft |
| Mohato oa 4 | 40 Nm/30 lbf.ft |
| Mohato oa 5 | 80 Nm /59 lbf.ft |
* Pheta ho fihlela ho tiisitsoe ka ho feletseng.
| Karolo | Boholo | Torque (Nm/ lbf.ft) |
| Koahela liboutu | M12*1.75 | 80/59 |
| Plug** | 1/4" NPT | 50/37 |
| Plug** | 1/2" G | 50/37 |
| Core Shaft | M10 | 30/22 |
| Lepheo la mapheo | M8 | 1.5/1.10
(Tiisa letsoho) |
Hlokomela:
** Tlosa polaka bakeng sa mohlalaample nang le schrader/ valve ea nale jj..
© Danfoss | Litharollo tsa Tlelaemete | 2024.12
LBH
A na nka sebelisa gasket hape bakeng sa sekoaelo sa DCR?
Che, u se ke ua sebelisa gasket hape. Etsa bonnete ba hore u khetha sekoahelo se ka holimo sa gasket bakeng sa DCR 'me u se ke ua sebelisa Oli / Grease holim'a gasket.
Ke lokela ho etsa eng ka sehlahla sa rabara nakong ea kopano?
Tlosa sehlahla sa rabara ha u ntse u etsa kopano.
Ke mofuta ofe oa sehokelo le thepa ea brazing e lokelang ho sebelisoa?
Sebelisa thepa ea tšepe e nang le Silver-flo 55 + Easy-flow flux bakeng sa brazing.
Litokomane / Lisebelisoa
 |
Danfoss Filter Drier Shell [pdf] Tlhophiso Tataiso 023R9548, 23M128, 23M129, Filter Drier Shell, Drier Shell, Shell |