Danfoss FA09 iC7 Automation Configurators

Litlhaloso

• Lebitso la Sehlahiswa: Ka hare-tlase/Kantle-morao Cooling Kit bakeng sa FA09-FA10
• Compaletlapa le: Li-converter tsa maqhubu tsa FA09 le FA10 li kentsoe ka har'a likhabinete tsa Rittal TS8 le VX25
• Linomoro tsa Kit:
  • 176F4040 - Sesebelisoa sa ho futhumatsa se ka tlase / sa ka morao bakeng sa li-converter tsa maqhubu a FA09
  • 176F4041 - Sesebelisoa sa ho futhumatsa se ka tlase / sa ka morao bakeng sa li-converter tsa maqhubu a FA10

Tataiso ea ho Kena

Fetileview

Tlhaloso
Setsi sa ho pholisa se ka tlase / ka morao se lumella moea hore o phalle ka har'a kotopo e ka tlase le ho tsoa ka kotopo e ka morao ea li-frequency converter tsa FA09 kapa FA10. Sheba Setšoantšo sa 1 bakeng sa tsela eo moea o phallang ka eona.

Linomoro tsa Kit
Sebelisa linomoro tse latelang tsa kit bakeng sa li-converter tse khethehileng tsa maqhubu:

• 176F4040 - bakeng sa li-converter tsa maqhubu a FA09
• 176F4041 - bakeng sa li-converter tsa maqhubu a FA10

Lintho tse Fanoeng
Thepa e kenyelletsa likarolo tse fapaneng tse kang telescopic bottom duct assembly, gaskets, screws, nuts, le tse ling. Sheba Lethathamo la 2 bakeng sa lethathamo le felletseng la litaba.

Ho kenya

Boitsebiso ba Tšireletseho
TSEBISO: Ho Hlokahala Basebeletsi ba Tšoanelehang

• Ke basebetsi ba tšoanelehang feela ba lokelang ho kenya likarolo tse boletsoeng litaelong.
• Latela mekhoa ea ho qhaqha le ho kopanya hape ho latela tataiso ea litšebeletso tse fapaneng.
• Kamehla khomarela litekanyetso tse tloaelehileng tsa torque ntle le ha ho boletsoe ka tsela e 'ngoe.

TLHOKOMELISO: Motlakase Shock Kotsi

• Vol e phahamengtages li teng ho converter frequency ha li hokahantsoe le mains voltage.
• Ho kenya kapa ho sebeletsa ka motlakase ho ka ba kotsi.
• Lumella litsebi tsa motlakase tse koetlisitsoeng feela ho kenya tšebetsong.
• Kamehla hakolla mehloling ea motlakase pele u kenya kapa tšebeletso.

TLHOKOMELISO: Nako ea ho Lahlela (20 Metsotso)

• Li-capacitor tsa DC-link ho frequency converter li ka lula li lefisoa le ha li sa sebelisoe.
• Emela bonyane metsotso e 20 ka mor'a ho tlosoa ha motlakase pele u etsa tšebeletso kapa mosebetsi oa ho lokisa.
• Hakolla mehloli eohle ea motlakase pele u sebeletsa.

LBH

1. P: Na sesebelisoa see sa ho futhumatsa se ka kenngoa mefuteng e meng ea likhabinete?
   A: Setsi sa ho pholisa se etselitsoe ho sebelisoa le likhabinete tsa Rittal TS8 le VX25 mme e kanna ea se tsamaellane le mefuta e meng ea khabinete.
2. P: Na lisebelisoa tse ling lia hlokahala bakeng sa ho kenya?
   A: Lisebelisoa tsa mantlha tse kang li-screwdriver le li-wrenches li ka hlokahala bakeng sa ho kenya. Sheba litaelo tsa ho kenya bakeng sa litlhoko tse khethehileng tsa lisebelisoa.

Fetileview

Tlhaloso
Thepa ea ho futhumatsa e ka tlase / ka morao e lumellana le li-frequency converter tsa FA09 le FA10 tse kentsoeng ka har'a likhabinete tsa Rittal TS8 le VX25. Ha khiti e kentsoe, moea o phalla ka har'a kotopo e ka tlase ebe o tsoa ka kotopo e ka morao ea converter ea frequency. Sheba Setšoantšo sa 1.

Sets'oants'o sa 1: Tataiso ea Phallo ea Moea ka Kit e kentsoe

1. Sekoahelo se ka holimo
2. Frequency converter
3. Kopano ea duct e tlase
4. Phallo ea moea ea kanale e ka morao (keno)
5. Phallo ea moea ea kanale e ka morao (exhaust)
6. Mounting plate

Linomoro tsa Kit

Sebelisa litaelo tsena ka lisebelisoa tse latelang.

Lethathamo la 1: Linomoro tsa Li-Cooling Kits tse ka Tlase/Kantle-morao

Nomoro	Tlhaloso ea lisebelisoa
176F4040	Setsi sa ho pholisa se ka tlase/kantle bakeng sa li-frequency converter tsa FA09
176F4041	Setsi sa ho pholisa se ka tlase/kantle bakeng sa li-frequency converter tsa FA10

Lintho tse Fanoeng

Sekhahla se na le likarolo tse latelang

Lethathamo la 2: Likahare tsa Ka hare/Kantle-morao Cooling Kit

Ntho	Bongata
Kopano ea likotopo tse tlase tsa telescopic	1
Rubber EPDM ribbed tiiso	1
Khase ea khase	1
Khanna sekotjana gasket	1
Seal plate gasket	2
Letlapa la tiiso	2
Letlapa la tšehetso ea duct	1
Duct tshehetso poleiti gasket	1
Sekoahelo se ka holimo	1
Top sekoahelo gasket	1
Mokokotlo o ka morao	1
Ka morao vent gasket	2
Mounting poleiti gasket	2
Gasket ea mokokotlo	2
Nate ea li-clip-on	12
M10x30 nsete	4
M5x16 countersunk screw	7
M5x18 nsete	6-8
M6x12 nsete	6-8
M5x10 taptite screw	5-10
M5 hex linate	6

Ho kenya

Boitsebiso ba Tšireletseho

MOSEBETSI A TSEBA

• Ke basebetsi ba tšoanelehang feela ba lumelloang ho kenya likarolo tse hlalositsoeng litaelong tsena tsa ho kenya.
• Ho qhaqholla le ho kopanya hape ha frequency converter ho tlameha ho etsoa ho latela tataiso ea litšebeletso e tsamaellanang.
• Sebelisa litekanyetso tse tloaelehileng tsa torque tse tsoang ho tataiso ea litšebeletso, ntle le haeba boleng ba torque bo boletsoe litaelong tsena.

TLHOKOMELO

MOTLATSI TS'OSI

• Mofetoleli oa maqhubu o na le matla a kotsitages ha e hokahane le mains voltage. Ho kenya kapa ho fana ka litšebeletso ka matla a hoketsoeng ka tsela e fosahetseng, ho ka baka lefu, kotsi e mpe kapa ho se sebetse ha thepa.
• Sebelisa feela litsebi tsa motlakase tse tšoanelehang bakeng sa ho kenya.
• Hakolla frequency converter mehloling eohle ea matla pele u instola kapa tšebeletso.
• Tšoara frequency converter e le phela neng kapa neng ha mains voltage hokahane.
• Latela litataiso tse litaelong tsena le melaoana ea polokeho ea motlakase ea lehae

TLHOKOMELO

NAKO YA HO HLAHALA (20 MINUTES)

• Mofetoleli oa maqhubu o na le li-capacitor tsa DC-link, tse ka lulang li lefisoa le ha converter ea frequency e sa sebetse.
• Vol e phahamengtage ka ba teng le ha mabone a sesupo sa temoso a timme.
• Ho hloleha ho ema metsotso e 20 ka mor'a hore motlakase o tlosoe pele o etsa tšebeletso kapa mosebetsi oa ho lokisa ho ka fella ka lefu kapa kotsi e mpe.
• Emisa koloi.
• Hakolla li-main tsa AC, li-motor tsa mofuta oa magnet, le lisebelisoa tse hole tsa DC-link, ho kenyeletsoa li-backups tsa betri, UPS, le
• Lihokelo tsa DC-link ho li-converter tse ling tsa frequency.
• Ema metsotso e 20 hore li-capacitor li tsoe ka botlalo pele u etsa tšebeletso leha e le efe kapa mosebetsi oa ho lokisa.
• Ho netefatsa phallo e felletseng, lekanya voltagboemo ba.

TLHALOSO ELECTROSTATIC
Electrostatic discharge e ka senya likarolo. Netefatsa ho tsoa pele o ama likarolo tsa kahare tsa frequency converter, mohlalaample ka ho thetsa bokahodimo bo fatshe, bo tsamaisang kapa ka ho roala seqha se fatshe.

Kemiso e Felletseview

SEBELISA LIKHASE

• Setsi sena se na le li-gaskets tse ikemetseng ho netefatsa tiiso e nepahetseng pakeng tsa likarolo tsa tšepe.
• Pele o kenya gasket, hlahloba hore na karolo e lumellana le gasket le hore ha ho masoba a koahetsoeng

Sehlahisoa se Felletseview

Setshwantsho 2: Ho fedileview ea In-bottom/ Out-back Cooling Kit

1. Mounting plate
2. Sekoahelo se ka holimo
3. Top sekoahelo gasket
4. Frequency converter
5. Duct tshehetso poleiti gasket
6. Letlapa la tšehetso ea duct
7. Terene e ka tlase ea telescopic
8. Mokoti o ka holimo
9. Mounting poleiti gasket
10. Mokokotlo o ka morao
11. Letlapa la mokokotlo
12. Sekoti se tlase sa ho kenya

Ho Lokisetsa Mount Plate

Ho theha masoba a ho kenya le masoba ho mounting plate, sebelisa mehato e latelang. Sebelisa litekanyo tse ho Papiso ea 3 bakeng sa li-frequency converter tsa FA09, le Papiso ea 4 bakeng sa li-frequency converter tsa FA10.

Tsamaiso

• Sebetsa masoba a 4 ho mounting plate u sebelisa litekanyo tsa thempleite.
• Likoti li tlameha ho ts'oana le masoba a frequency converter.
• Kenya 4 M10 pem nuts (ha e fanoe) ka mekoting e ntseng e hola.
• Seha lesoba ka har'a mounting plate u sebelisa litekanyo tsa thempleite.
• Mekhatlo e tlameha ho ts'oana le phallo e kaholimo ea kotopo ho converter frequency.

Sets'oants'o sa 3: FA09 Mounting Plate Template for In-bottom/ Out-back Cooling

Sets'oants'o sa 4: FA10 Mounting Plate Template for In-bottom/ Out-back Cooling

Ho Lokisetsa Backplate Ho theha lekhalo le kenang ka har'a khabinete e ka morao ho ts'oana le phatlo e ho mounting plate, sebelisa mehato e latelang. Sebelisa litekanyo tse ho Papiso ea 5 bakeng sa li-frequency converter tsa FA09, le Papiso ea 6 bakeng sa li-frequency converter tsa FA10.

Tsamaiso

• Seha lesoba le lesoba ka har'a khabinete e ka morao u sebelisa litekanyo tsa thempleite.
• Pula ea lesoba e tlameha ho ts'oana le ho buloa ha mounting plate.
• Epa masoba a screw (6 limilimithara) ho potoloha lesoba la lesoba u sebelisa litekanyo tsa thempleite.
• FA09 e hloka masoba a 6 ho potoloha sebaka se bulehileng, 'me FA10 e hloka masoba a 8 ho potoloha sebaka. Likoti li tlameha ho ikamahanya le masoba ka mapheong a ka ntle a moea o ka morao.

Sets'oants'o sa 5: Template ea Moralo oa Khabinete ea FA09 bakeng sa Ho Pholisa ka Tlase/Kantle

Sets'oants'o sa 6: Template ea Moralo oa Khabinete ea FA10 bakeng sa Ho Pholisa ka Tlase/Kantle

Ho kenya Sekoahelo se ka Holimo

Ho kenya sekoahelo se ka holimo sa kit e pholileng, sebelisa mehato e latelang. Sheba Setšoantšo sa 7.

Tsamaiso

• Tlosa pampiri e tšehetsang ho tloha ka holimo sekoahelo gasket ho pepesa sekhomaretsi.
• Khomarela sekoahelo se ka holimo gasket ho underside ea holimo sekoahelo.
• Tlosa li-screws tse 8 tsa M5x14 (T25) tse pota-potileng mahlakore le ka morao ea lesoba ka holimo ho converter ea maqhubu. Boloka li-screws.
• Tlosa li-screw tse 3 tsa M5x12 (T25) ka pele ho lesoba sebakeng se ka holimo sa converter frequency.
• Thellela ntlha ea sekoaelo ka tlas'a likurufu tse 3 tse hlephileng, u behe sekoahelo holim'a moea o ka holimo ho converter ea maqhubu.
• Sireletsa sekoaelo se kaholimo ho sesebelisoa sa frequency converter ka li-screw tsa M5x14 (T25) tse tlositsoeng pele mohatong oa 3.
• Torque li-screw tsohle ho 2.3 Nm (20 in-lb).

1. Lisebelisoa tsa M5x14
2. Sekoahelo se ka holimo
3. Top sekoahelo gasket
4. Leqhubu le holimo

Ho Bula Leqhubu la Leqhubu ka Poleteng ea Motheo

Ho theha lekhalo le kenang ka har'a poleiti ea motheo bakeng sa kotopo e tlase, sebelisa mehato e latelang. Sebelisa litekanyo tse ho Papiso ea 8 bakeng sa li-frequency converter tsa FA09, le Papiso ea 9 bakeng sa li-frequency converter tsa FA10.

Tsamaiso

• Seha lesoba le lesoba ka har'a khabote ea motheo ea khabinete u sebelisa litekanyo tsa thempleite.
• Sebetsa likoti tse 6 (4 limilimithara) ho potoloha lesoba u sebelisa litekanyo tsa thempleite.
• Likoti li tlameha ho ts'oana le masoba a flange e tlase ea kotopo e tlase

Setshwantsho 8: FA09 Base Plate Template

Setshwantsho 9: FA10 Base Plate Template

Ho phahamisa Frequency Converter

Ho kenya mounting plate le frequency converter ka hara khabinete ea Rittal, sebelisa mehato e latelang. Sheba Setšoantšo sa 10.

Tsamaiso

1. Hokela poleiti ea ho roala liporong tsa khabinete, ho etsa bonnete ba hore linate tsa pem li shebane le ka morao ea khabinete.
2. Tlosa pampiri e tšehetsang ho tloha ho sekhomaretsi se ikemetseng holim'a gasket ea cutout.
3. Koahela gasket holim'a phallo ea kotopo ka har'a mounting plate.
4. Tlosa pampiri e tšehetsang ho tloha ho self adhesive holim'a gasket ea hlobolisa.
5. Kenya gasket holim'a linate tse 2 tsa pem tse tlase ka har'a poleiti ea ho kenya.
6. Tlosa pampiri e tšehetsang ho tloha ho 2 seal plate gaskets, 'me u khomarele li-gaskets ho lipoleiti tsa tiiso, 1 ka poleiti.
7. Kenya li-screw tse 2 tsa M10x30 ka har'a li-seal plates, 1 poleiti ka 'ngoe, le ka har'a linate tsa pem pheletsong e ka tlase ea poleiti e ntseng e holisoa.
   • Etsa bonnete ba hore li-screws li sireletsehile. Motheo oa converter frequency e lutse holim'a likurufu.
8. Itšetleha hanyane kaholimo ho converter ea frequency pele 'me u behe li-cutouts botlaaseng holim'a li-screw tse 2.
9. Butle-butle sutumelletsa bokaholimo ba converter ea frequency ho khutlela ho mounting plate ho fihlela linate tse 2 tsa pem tse holimo li hola le masoba a frequency converter.
10. Sireletsa top of converter frequency u sebelisa 2 M10x30 screws. Torque li-screw tsohle tsa M10x30 ho 19 Nm (170 in-lb).

Setshwantsho sa 10: Ho Kenngwa ha Frequency Converter ka hara Kabinete

1. Likoti tse kenyang
2. M10x30 nsete
3. Frequency converter
4. Seal plate gasket
5. Letlapa la tiiso
6. M10x30 nsete
7. Pem linate
8. Khase ea khase
9. Mounting plate
10. Tlosa gasket

Ho kenya Letlapa la Ts'ehetso ea Duct

Letlapa la ts'ehetso ea duct le hokela kotopo e tlase pheletsong e ka tlase ea converter ea frequency. Ho kenya poleiti ea tšehetso ea duct, sebelisa mehato e latelang. Sheba Setšoantšo sa 11.

Tsamaiso

1. Tlosa pampiri e tšehetsang ho tloha ka duct support plate gasket.
2. Khomarela gasket karolong e ka holimo ea poleiti ea tšehetso ea duct.
3. Beha poleiti ea ts'ehetso ea duct karolong e ka tlase ea converter frequency.
4. Sireletsa poleiti ea ts'ehetso ea duct ho converter frequency u sebelisa 7 M5x16 countersunk screws (T25).
   • Li-fasteners tsa torque ho 2.3 Nm (20 in-lb).

Sets'oants'o sa 11: Ho kengoa ha Letlapa la Tšehetso ea Mokelikeli

1. Frequency converter
2. Duct tshehetso poleiti gasket
3. Letlapa la tšehetso ea duct
4. M5x16 countersunk screw

Ho Kopanya Motsoako o ka Tlase
Mohokelo o ka tlase ke kotopo ea telescopic e oang ho nolofatsa ho kenya. Ho kopanya duct pele o kenya, sebelisa tse latelang
mehato. Sheba Setšoantšo sa 12.
Tsamaiso

1. Khaola mohala oa tiiso ea rabara ea EPDM ka likotoana tse peli. Sebelisa litekanyo tse latelang:
   • Bakeng sa li-frequency converters tsa FA09, khaola likotoana tse 2 tsa 682 mm (26.9 in).
   • Bakeng sa li-frequency converters tsa FA10, khaola likotoana tse 2 tsa 877 mm (34.5 in).
2. Ebola pampiri holim'a litiiso tse itšebetsang.
3. Beha mohala o le mong oa rabara karolong e ka ntle e ka ntle ea lesela le ka hare la kotopo, le lesela le le leng la rabara karolong e ka holimo ea lesela le ka ntle la kotopo.
4. Ha litiiso tsa rabara li le teng, ka hloko u kenye letsoho le ka hare la kotopo ka har'a letsoho le ka ntle

Setšoantšo sa 12: Kopano ea Mokelikeli oa Telescopic

1. Letsopa le ka hare la duct
2. Setiiso sa rabara sa EPDM se ribbed
3. Mokotla o ka ntle oa duct

Ho kenya The Bottom Duct

Ho hokela kotopo e ka tlase ho poleiti ea motheo ea khabinete, sebelisa mehato e latelang. Sheba Setšoantšo sa 13.

Tsamaiso

1. Kenya li-base plate ka har'a khabinete ea Rittal u sebelisa li-fasteners tse teng.
2. Beha kotopo e ka tlase 'me u e behe holim'a sekheo sa moea ho base plate.
3. Beha masoba karolong e ka tlaase ea kotopo holim'a masoba a potolohileng lesoba la poleiti.
4. Fasten 4 M5x10 screws (T25) ka har'a masoba a flange e ka tlaase ea kotopo, ho e sireletsa ho base plate.
5. Eketsa kotopo holimo 'me u fasten ka linate tsa 6 M5 hex, u li boloke ho poleiti ea tšehetso ea duct

Setshwantsho sa 13: Ho kenngwa ha Mokotopo o ka Tlase

1. M5 hex linate
2. Teko e ka tlase ea telescopic
3. M5x16 nsete
4. Base poleiti
5. Letlapa la tšehetso ea duct
6. Flange e tlase ea duct

Ho kenya Back Vent
Ho kenya moea o ka morao, sebelisa mehato e latelang. Sheba Setšoantšo sa 14.

Tsamaiso

1. Slide 6 clip-on nuts holim'a ntlha ea lesoba le ka morao la khabinete.
2. Beha linate ka har'a likoti tse 6 tse potolohileng sebaka se bulehileng.
3. Affix 2 back vent gaskets ho flange ea mokokotlo o ka morao, beha 1 gasket ka lehlakoreng le ka hare le 1 gasket ka lehlakoreng le ka ntle la flange.
4. Suthela lesoba le ka morao ho lesoba ka poleiti e ka morao.
5. Tlama li-screws tsa M6x12 ho potoloha ntlha e ka hare ea lesoba le ka morao.
   • Kit ea FA09 e hloka likurufu tse 6, 'me kit ea FA10 e hloka likurufu tse 8.
6. Sireletsa li-screws tsa M5x18 flange ea lesoba le ka morao, u hokele le lesoba le ka morao.
   • Kit ea FA09 e hloka likurufu tse 6, 'me kit ea FA10 e hloka likurufu tse 8

Sets'oants'o sa 14: Ho kengoa ha Leqhubu le Khutlileng

1. Nate ea li-clip-on
2. Gasket e ka morao (ka hare)
3. Mokokotlo o ka morao
4. Gasket e ka morao (ka ntle)
5. M6x12 nsete
6. M5x18 nsete

Danfoss A/S Ulsnaes 1 DK-6300 Graasten

• drives.danfoss.com

Tlhahisoleseding efe kapa efe, ho kenyeletswa, empa e sa felle feela ho tlhahisoleseding e mabapi le kgetho ya sehlahiswa, tshebediso ya sona kapa tshebediso ya sona, moralo wa sehlahiswa, boima, boholo, boholo, bokgoni kapa datha efe kapa efe ya tekheniki e dipukung tsa sehlahiswa, ditlhaloso tsa dikgatiso, dipapatso, j.j. le hore na di fumaneha ka mongolo , ka molomo, ka mokhoa oa elektronike, inthaneteng kapa ka mokhoa oa ho jarolla, e tla nkoa e le tsebo, 'me e tlama feela haeba, ho fihlela moo, ho etsoa litšupiso tse hlakileng khotheishene kapa netefatso ea taelo. Danfoss e ke ke ea amohela boikarabello bofe kapa bofe bakeng sa liphoso tse ka bang teng libukeng tsa libuka, libukana, livideo le lintho tse ling. Danfoss e na le tokelo ea ho fetola lihlahisoa tsa eona ntle le tsebiso. Sena se sebetsa le ho lihlahisoa tse otarang empa li sa tlisoa ha feela liphetoho tse joalo li ka etsoa ntle le liphetoho sebopeho, ho lekana kapa tšebetso ea sehlahisoa. Matšoao 'ohle a thepa ena ke thepa ea lik'hamphani tsa Danfoss A/S kapa tsa Danfoss. Danfoss le logo ea Danfoss ke matšoao a khoebo a Danfoss A/S. Litokelo tsohle li sirelelitsoe.

Litokomane / Lisebelisoa

Danfoss FA09 iC7 Automation Configurators [pdf] Tlhophiso Tataiso FA09 iC7 Automation Configurators, FA09 iC7, Automation Configurators, Configurators

Litšupiso

• Bukana ea Mosebelisi