Control4 C4-CORE5 Core 5 Molaoli

Likahare tsa lebokose

Lintlha tse latelang li kenyelelitsoe lebokoseng:

• CORE-5 molaoli
• Khoele ea motlakase ea AC
• Li-emitters tsa IR (8)
• Rock ears {2, e kentsoe pele ho CORE-5)
• Maoto a rabara (2, ka lebokoseng)
• Manakana a kantle (2)
• Li-terminal blocks bakeng sa mabitso le li-relay

Lisebelisoa li rekisoa ka thoko

• Control4 3-Meter Wireless Antenna Kit (C4-AK-3M)
• Control4 Dual-Bond WiFi USB Adopter (C4-USBWIFI KAPA C4-USBWIFl-1)
• Control4 3.5 mm ho isa 089 Serial Coble (C4-CBL3.5-D89B)

Litemoso

• Tlhokomeliso! Ho fokotsa kotsi ea ts'oaetso ea motlakase, u se ke ua pepesetsa sesebelisoa sena pula kapa mongobo.
• Tlhokomeliso! Software e tima tlhahiso maemong a aver-hajoale ho USB kapa tlhahiso ea khokahanyo. Tlosa sesebelisoa ho molaoli haeba sesebelisoa sa USB se khomaretsoeng kapa sensor ea ho ikopanya e sa bonahale e le matla.
• Tlhokomeliso! Haeba sehlahisoa sena se sebelisetsoa ho bula le ho koala lemati la karache, heke, kapa lisebelisoa tse tšoanang, sebelisa tšireletso kapa lisensara tse ling ho netefatsa ts'ebetso e sireletsehileng. Latela maemo a nepahetseng a taolo le polokeho a laolang moralo le ho kenya projeke. Ho hlōleha ho etsa joalo ho ka baka tšenyo ea thepa kapa kotsi ea botho.

Litlhoko le litlhaloso

• Hlokomela: Re khothaletsa ho sebelisa Ethernet sebakeng sa WiFi bakeng sa khokahanyo e ntle ea marang-rang.
• Hlokomela: Marang-rang a Ethernet kapa WiFi a lokela ho kenngoa pele o kenya CORE-5 controller.
• Hlokomela: CORE-5 e hloka OS 3.3 kapa ho feta. Composer Pro ea hlokahala ho lokisa sesebelisoa sena. Sheba Tataiso ea Mosebelisi ea Composer Pro (ctrl4.co/cpro-ug) ho fumana lintlha.

Litlhaloso

Lisebelisoa tse ling

Lisebelisoa tse latelang li fumaneha bakeng sa tšehetso e eketsehileng.

• Control4 CORE letoto la thuso le tlhaiso-leseling: ctrl4.co/core
• Snap One Tech Community le Knowledgebase: tech.control4.com
• Control4 Tšehetso ea Theknoloji
• Control4 websebaka: www.tlhapelok.com

FEELAVIEW

Pele view

• A. Ts'ebetso ea LED- LED e bontša hore molaoli o phalla molumo.
• B. IR fensetere- Moamoheli oa lR bakeng sa ho ithuta likhoutu tsa IR.
• C. Tlhokomeliso LED- LED ena e bonts'a bofubelu bo tiileng, ebe e benya boputsoa nakong ea ts'ebetso ea boot.
  Hlokomela: The Tlhokomeliso LED e khantša lamunu nakong ea ts'ebetso ea ho tsosolosa fektheri. Sheba "Reset to factory setting'" tokomaneng ena.
• D. Khokahanyo ea LED- LED e bontša hore molaoli o khethiloe morerong oa Control4 Composer mme o buisana le Mookameli.
• E. Matla a LED- LED e putsoa e bontša hore matla a AC a hokahane. Molaoli o bulela hang ka mor'a hore matla a sebelisoe ho eona.

Morao view

• A. Sesebelisoa sa motlakase sa port-AC bakeng sa khoele ea matla ea IEC 60320-03.
• B. Kopana / Relay port-Hokela lisebelisoa tse ka bang 'ne tsa li-relay le lisebelisoa tse' nè tsa sensor ea ho ikopanya le sehokelo sa "terminal block". Relay ore ore COM, NC (hangata e koetsoe), le NO (hangata e butsoe). Ikopanye le li-sensor tsa ore +12, SIG (pontšo), le GNO (fatše).
• C. ETHERNET-RJ-45 jock bakeng sa khokahano ea 10/100/1000 BaseT Ethernet.
• D. USS-TXNUMX port bakeng sa drive ea kantle ea USB kapa khetho ea Dual-Band WiFi USB Adopter. Sheba "seta lisebelisoa tsa polokelo ea kantle" tokomaneng ena.
• E. HDMI OUT-An HDMI kou ho bonts'a menyetla ea sistimi. E boetse e hlahisoa ka molumo ka HOMI.
• F. ID le konopo ea FACTORY RESET-ID ho tsebahatsa sesebelisoa ho Composer Pro. Konopo ea ID ho CORE-5 e boetse e ho LED e bonts'ang maikutlo a bohlokoa nakong ea ho khutlisa feme.
• G. Sehokelo sa ZWAVE-Antenna bakeng sa seea-le-moea sa 2-Wove
• H. SERIAL-Likou tse peli tsa serial bakeng sa taolo ea RS-232. Sheba "Ho hokela likou tsa serial" tokomaneng ena.
• I. Li-jacks tsa IR / SERIAL-Eight 3.5 mm bakeng sa li-emitters tse robeli tsa IR kapa bakeng sa motsoako oa li-emitters tsa IR le lisebelisoa tsa serial. Maemo a 1 le a 2 a hlophisoa ka boikemelo bakeng sa taolo ea serial kapa bakeng sa taolo ea IR. Sheba "Ho theha li-emitters tsa IR" tokomaneng ena bakeng sa tlhaiso-leseling e batsi.
• J. DIGITAL AUDIO-One digital coax audio input le likou tse tharo tse hlahisoang. E lumella molumo ho ts'oaroa (IN 1) marang-rang a lehae ho ea ho lisebelisoa tse ling tsa Control4. Melumo ea molumo (OUT 1/2/3) e arolelanoang ho tsoa ho lisebelisoa tse ling tsa Control4 kapa mehloling ea audio ea dijithale (liphatlalatso tsa lehae kapa lits'ebeletso tsa ho hasanya tsa dijithale joalo ka Tuneln.)
• K. ANALOG AUDIO-E le 'ngoe ea molumo oa stereo le likou tse tharo tse hlahisoang. E lumella molumo ho arolelanoa (IN 1) marang-rang a lehae ho lisebelisoa tse ling tsa Control4. Melumo e hlahisoang (OUT 1/2/3) e hoholetsoeng ho tsoa ho lisebelisoa tse ling tsa Control4 kapa mehloling ea audio ea dijithale (liphatlalatso tsa lehae kapa lits'ebeletso tsa ho hasanya tsa dijithale joalo ka Tuneln.)
• L. ZIGBEE-Antenna bakeng sa seea-le-moea sa Zigbee.

Ho kenya molaoli

Ho kenya controller:

1. Netefatsa hore marangrang a lapeng a teng pele o qala ho seta sistimi. Molaoli o hloka khokahano ea marang-rang, Ethernet (e khothalelitsoe) kapa WiFi (e nang le moamoheli oa boikhethelo), ho sebelisa likarolo tsohle tse entsoeng. Ha o hokahantsoe, molaoli a ka fihlella web-li-database tsa media tse thehiloeng, ho buisana le lisebelisoa tse ling tsa IP ka lapeng, le ho fihlella lintlafatso tsa sistimi ea Control4.
2. Kenya selaoli ka rakeng kapa se phuthetsoe shelofong. Kamehla lumella moea o mongata. Sheba "Ho kenya molaoli lefikeng" tokomaneng ena.
3. Hokela molaoli ho netweke.
   • Ethernet-Ho hokela o sebelisa khokahanyo ea Ethernet, hokela khoele ea data ho tsoa khokahanyong ea netweke ea lapeng ho koung ea RJ-45 ea molaoli (e ngotsoeng ETHERNET) le boema-kepe ba marang-rang leboteng kapa sesebelisoa sa marang-rang.
   • WiFi-Ho hokela o sebelisa WiFi, qala ka ho hokela molaoli ho Ethernet, ebe o sebelisa Composer Pro System Manager ho lokisa selaoli sa WiFi.
4. Hokela lisebelisoa tsa sistimi. Hokela IR le lisebelisoa tsa serial joalo ka ha ho hlalositsoe ho "hokela likou tsa IR/serial ports" le "ho theha li-emitters tsa IR."
5. Hlophisa lisebelisoa life kapa life tsa polokelo ea kantle joalo ka ha ho hlalositsoe ho ·ho theha lisebelisoa tsa polokelo ea kantle”' tokomaneng ena.
6. Matlafatsa molaoli. Hokela thapo ea motlakase boema-kepe ba polaka ea motlakase ebe o e kenya ka har'a sehokelo sa motlakase.

Ho kenya molaoli ka har'a lefika

U sebelisa litsebe tsa rock-mount tse kentsoeng pele, CORE-5 e ka behoa habonolo lefikeng bakeng sa ho kenya habonolo le ho behoa ha rack e bonolo. Lejoe le kentsoeng pele la rock-mount ears con e bile e khutlisetsoa morao hore e phahamise selaoli se shebileng ka morao ho lefika, ha ho hlokahala.

Ho hokela maoto a rabara ho molaoli:

1. Tlosa li-screws tse peli ho e 'ngoe le e 'ngoe ea litsebe tsa rock tse tlase ho molaoli. Tlosa litsebe tsa rack ho molaoli.
2. Tlosa li-screws tse peli tse eketsehileng ho tloha ka mokotleng oa molaoli 'me u behe maoto a rabara holim'a molaoli.
3. Sireletsa maoto a rabara ho molaoli ka li-screws tse tharo leotong le leng le le leng la rabara.

Lihokelo tsa li-terminal block tse ka kengoang

Bakeng sa likou tsa likhokahano le li-relay, CORE-5 e sebelisa likhokahano tsa li-terminal tse plugable tse nang le likarolo tsa polasetiki tse ntšoang tse notlelang lithapo tse ikemetseng (tse kenyellelitsoeng).

Ho hokela sesebediswa sebakeng sa thipa ya plugable:

1. Kenya e 'ngoe ea lithapo tse hlokehang bakeng sa sesebediswa sa hao sebakeng se loketseng ho bula theminale e polakang eo o e boloketseng sesebediswa seo.
2. Sebelisa screwdriver e nyane ea flat-blade ho tiisa screw le ho tiisa terata bolokong ba theminale.

ExampLe: Ho kenya sensor ea ho sisinyeha (sheba setšoantšo sa 3), hokela lithapo tsa eona ho menyetla e latelang ea likhokahano:

• Kenyeletso ea matla ho +12V
• Letšoao la tlhahiso ho SIG
• Sehokelo sa fatše ho GND

Hlokomela: Ho hokela lisebelisoa tsa ho koala sehokelo se omileng, joalo ka litloloko tsa mamati, hokela switch lipakeng tsa +12 (matla) le SIG (pontšo).

Ho hokela likou tsa likhokahano

CORE-5 e fana ka likou tse 'ne tsa ho ikopanya le li-terminal tse kenyellelitsoeng tse kenyellelitsoeng. Bona exampka tlase ho ithuta mokhoa oa ho hokela lisebelisoa ho likou tsa ho ikopanya.

• Kenya mohala ho mosebelisi ea hlokang matla (Motion sensor).
• Kopanya lebitso ho sesebelisoa se omileng sa sehokelo (sensara ea monyako).
• Tlosa mohala, ho ikopanya le sensor e tsamaeang ka ntle (sensor ea Driveway).

Ho hokela likou tsa relay
CORE-5 e fana ka likou tse 'ne tsa li-relay ho li-block tsa li-terminal tse kenyellelitsoeng. Bona exampka tlase ho ithuta hona joale ho hokahanya lisebelisoa tse fapaneng ho li-ports tsa relay.

• Wila, relay ho sesebelisoa se nang le phepelo e le 'ngoe, hangata se butsoe (Fireplace).
• Hokela relay ho sesebelisoa sa li-relay tse peli (Lifofu).
• 

Ho hokahanya likou tsa serial
Molaoli oa CORE-5 o fana ka likou tse 'ne tsa serial. SERIAL 1 le SERIAL 2 li ka hokela ho thapo e tloaelehileng ea 0B9. Likou tsa IR I le 2 (serial 3 le 4) li ka hlophisoa bocha ka boikemelo bakeng sa puisano ea serial. Haeba e sa sebelisoe bakeng sa serial, e ka sebelisoa bakeng sa JR. Hokela sesebelisoa sa serial ho molaoli o sebelisa Control4 3.5 mm-to-0B9 Serial Cable (C4-Cel3.S-Oe9B, e rekisoang ka thoko).

1. Likou tsa serial li ts'ehetsa litefiso tse ngata tse fapaneng tsa baud (mofuta o amohelehang: 1200 ho isa ho 115200 baud bakeng sa odd esita le parity). Li-serial ports 3 le 4 (IR 1 le 2) ha li tšehetse taolo ea phallo ea hardware.
2. Sheba sehlooho sa Knowledgebase #268 (http://ctrl4.co/contr-seri0l-pinout) bakeng sa litšoantšo tsa pinout.
3. Ho lokisa litlhophiso tsa serial tsa boema-kepe, etsa likhokahano tse nepahetseng morerong oa hau u sebelisa Composer Pro. Ho hokela boema-kepe ho mokhanni ho tla sebelisa litlhophiso tsa serial tse fumanehang ho mokhanni file ho ea koung ea serial. Sheba Composer Pro User Guide bakeng sa lintlha tse ling.

Hlokomela: Li-serial ports 3 le 4 li ka hlophisoa e le tse otlolohileng kapa tse se nang letho ka Composer Pro. Li-ports tsa serial ka ho sa feleng li hlophisitsoe ka ho toba 'me li ka fetoloa ho Composer ka ho khetha khetho Enable Null-Modem Serial Port (314).

Ho theha li-emitters tsa IR

Molaoli oa CORE-5 o fana ka likou tse 8 tsa IR. Sistimi ea hau e kanna ea ba le lihlahisoa tsa motho oa boraro tse laoloang ka litaelo tsa IR. Li-emitters tsa IR tse kenyellelitsoeng li romella litaelo ho tsoa ho molaoli ho sesebelisoa leha e le sefe se laoloang ke IR.

1. Hokela e 'ngoe ea li-emitters tsa IR tse kenyellelitsoeng boema-kepeng ba IR OUT ho molaoli.
2. Tlosa tšehetso ea sekhomaretsi ho tloha qetellong ea emitter (pota) ea emitter ea IR 'me u e khomarele ho sesebelisoa se lokelang ho laoloa holim'a moamoheli oa IR sesebelisoa.

Ho theha lisebelisoa tsa polokelo ea kantle
O ka boloka le ho fihlella mecha ea litaba ho tsoa sesebelisoa sa polokelo ea kantle, mohlalaample, drive drive, ka ho hokela koloi ea ts'ebeliso ho koung ea ts'ebeliso le ho hlophisa kapa ho lekola mecha ea litaba ho Composer Pro. Koloi ea NAS e ka boela ea sebelisoa os sesebelisoa sa polokelo ea kantle; bona Tataiso ea Mosebelisi ea Composer Pro (ctr14 co/cpro-ug) bakeng sa lintlha tse ling.

• Hlokomela: Re ts'ehetsa feela li-drive tsa ts'ebeliso ea kantle kapa li-drive tsa USB tsa boemo bo tiileng (li-drive tsa menoana tsa USB). Li-hard drive tsa USB tse sa keneng motlakase o arohaneng o sa tšehetsoeng
• Hlokomela: Ha o sebelisa lisebelisoa tsa ho boloka kapa tsa eSATA ho molaoli oa CORE-5, ho khothaletsoa karohano e le 'ngoe e hlophisitsoeng ea FAT32.

Lintlha tsa mokhanni oa Composer Pro
Sebelisa Auto Discovery le SOOP ho makatsa mokhanni ho morero oa Moqapi. Sheba Tataiso ea Mosebelisi ea Composer Pro (ctr!4 co/cprn-ug) ho fumana lintlha.

Ho batle phoso

Khutlisa ho li-setting tsa feme
Tlhokomeliso! Ts'ebetso ea ho khutlisetsa feme e tla tlosa morero oa Moqapi.

Ho khutlisetsa molaoli setšoantšong sa kamehla sa feme:

1. Kenya ntlha e le 'ngoe ea sekotwana sa pampiri ka lesobeng le lenyenyane lebokoseng la molaoli le ngotsoeng RESET.
2. Tobetsa 'me u tšoare konopo ea RESET. Selaoli se seta bocha 'me konopo ea ID e fetohela ho bofubelu bo tiileng.
3. Tšoara konopo ho fihlela ID e benya lamunu habeli. Sena se lokela ho nka metsotsoana e mehlano ho isa ho e supileng. Konopo ea ID e benya lamunu ha feme e khutlisa e ntse e sebetsa. Ha e felile, konopo ea ID ea tima 'me matla a sesebelisoa a potoloha lekhetlo le leng hape ho phethela ts'ebetso ea ho khutlisa feme.

Hlokomela: Nakong ea ts'ebetso ea ho seta bocha, konopo ea ID e fana ka maikutlo a itseng os Tlhokomelo ea LED e ka pele ho molaoli.

Potoloho ea matla molaoli

1.  Tobetsa 'me u tšoare konopo ea ID metsotsoana e mehlano. Selaoli sea tima ebe se bula.

Seta bocha li-setting tsa marang-rang
Ho seta botjha li-setting tsa netweke tsa controller hore e be tsa kamehla:

1. Tlosa motlakase ho molaoli.
2. Ha u ntse u tobetsa le ho tšoara konopo ea ID ka morao ho molaoli, kenya matla ho molaoli.
3. Tšoara konopo ea ID ho fihlela konopo ea ID e fetoha lamunu e tiileng 'me sehokelo le Power LEDs li boputsoa bo tiileng, ebe hang-hang o lokolla konopo.

Hlokomela: Nakong ea ts'ebetso ea ho seta bocha, konopo ea ID e fana ka maikutlo a tšoanang le a Tlhokomeliso ea LED e ka pele ho molaoli.

Lintlha tsa boemo ba LED

Litaba tsa Molao, Tiisetso, le Taolo/Tshireletso
Etela snapooe.com/legalbakeng sa lintlha.

Thuso e eketsehileng
Bakeng sa phetolelo ea morao-rao ea tokomane ena le ho view lisebelisoa tse ling, bula file ea URL ka tlase kapa o hlahlobe khoutu ea QR sesebelisoa se khonang view Li-PDF.

Copyright 2021, Snop One, LLC. Litokelo tsohle li sirelelitsoe. Snap One le li-logo tsa eona ke matšoao a ngolisitsoeng a khoebo a Snop One, LLC (eo pele e neng e tsejoa e le Wirepoth Home Systems, LLC), United Stoles le/kapa linaheng tse ling. 4Store, 4Sight, Conlrol4, Conlrol4 My Home, SnopAV, Moclwponcy, NEEO, OvrC, Wirepoth, le Wirepoth ONE le tsona ke matshwao a kgwebo a ngodisitsweng kapa matshwao a kgwebo a Snop One, LLC. Mabitso a mang le mabitso a mang a ka tsekoa e le thepa ea beng ba tsona. Snap One ha e etse da1m hore tlhahisoleseling e fanoeng mona e akaretsa maemo ohle a ho kenya le maemo a tšohanyetso, kapa likotsi tsa ts'ebeliso ea produc1. tlhahisoleseding e ka hare ho tlhaloso ena e ka fetoha ntle le tsebiso

Litokomane / Lisebelisoa

Control4 C4-CORE5 Core 5 Molaoli [pdf] Tlhophiso Tataiso CORE5, 2AJAC-CORE5, 2AJACCORE5, C4-CORE5 Core 5 Controller, C4-CORE5, Core 5 Controller, Controller

Litšupiso

• Bukana ea Mosebelisi