Circutor RECmax P Automatic Switch bakeng sa Bukana ea Taelo ea Tsamaiso ea ho Koala e Iketselitseng
Bukana ena ke tataiso ea ho kenya RECmax P. Ho fumana lintlha tse ling, ka kopo khoasolla bukana e felletseng ho CIRCUTOR web sebaka: www.circutor.com
BOHLOKOA!
Sesebelisoa se tlameha ho hangoa mehloling ea phepelo ea motlakase (phepelo ea motlakase le tekanyo) pele se etsa ts'ebetso efe kapa efe ea ho kenya, ho lokisa kapa ho sebetsana le likhokelo tsa sesebelisoa. Ikopanye le tšebeletso ea ka mor'a thekiso haeba u belaela hore ho na le phoso ea ts'ebetso sesebelisoa. Sesebelisoa se etselitsoe hore se nkeloe sebaka habonolo haeba se sa sebetse hantle.
Moetsi oa sesebelisoa ha a ikarabelle bakeng sa tšenyo leha e le efe e bakiloeng ke ho hloleha ha mosebelisi kapa sephuthelo ho ela hloko litemoso le/kapa likhothaletso tse boletsoeng bukeng ena, kapa bakeng sa tšenyo e bakiloeng ke ts'ebeliso ea lihlahisoa kapa lisebelisoa tseo e seng tsa mantlha kapa tse entsoeng. ka bahlahisi ba bang.
TLHALOSO
RECmax P ke enjene ea elektroniki ea DC e laolang sekhechana sa potoloho se amanang. Ke sekhechana sa potoloho se nang le sistimi e koalang ka bo eona ho sireletsa le ho koala mets'o ea motlakase hape. E sebelisoa khafetsa lits'ebetsong tse hlokang hore motlakase o tsoele pele ntle le tlhokomelo e nyane.
E na le matla a mabelitaglisebelisoa tsa ka ntle tsa e-free tse laelang ho bula le ho koala ho latelang (mokhoa oa ho koala) oa switch ea othomathike.
E na le liphetho tse peli tsa khokahano e le 'ngoe ho bonts'a boemo le sesosa sa ho buloa ha switch ea othomathike.
|
Likaroloana
|
|
|
1 |
Leqhubu le sebelisetsoa ho koala sesebelisoa se seholo hape. Boemo ba kamehla ba lever bo tlase. Tabeng ea ho koala hape, lever e phahamisoa ke mokhanni ea nang le likoloi, e kopanyang sesebelisoa se seholo. Ka mor'a ho koala hape, enjene e khanna lever ho khutlela sebakeng se tlase |
|
2 |
Sistimi ea ho notlela: Sistimi e na le senotlolo sa mochini ho qoba ho hokahana bocha ha sesebelisoa se seholo, ka hona, e feta khetho ea othomathike ea ho koala hape. Hlokomela : Leqhubu la ho notlela le ka notleloa ka mochini |
|
3 |
Ka pele ho selaoli sa enjene: konopo ea push |
|
4 |
Likhokahano tsa matla a li-circuit breaker. |
|
5 |
Li-terminals tsa plug-in tse tlase li setiloe: LEETO (9,10):NC tlhahiso Manual-Test O (11,12): Isolated input for trip, voltagmahala. Ke (12,13): Isolated input for restart, voltagmahala. AUX (14,15): HA HO tlhahiso |
|
6 |
Li-terminals tsa plug-in tse holimo li behiloe ON/OFF (16,17,18): Boemo ba ho senya potoloho. |
|
7 |
Li-terminals tsa plug-in tse holimo li setiloe LN (1,3): Phepelo ea motlakase |
Lipontšo
| 1 | LED ON (Tala) sekhechana sa potoloho se koetsoe |
| 2 | TEST/RESET/TEST/RESET push-konopo Konopo e na le ts'ebetso e habeli ho latela maemo a fetileng a sekhechana sa potoloho |
| 3 | Lebone la LED (Rhibedu) sekheo sa potoloho se bulehile |
Haeba e ON (tala) le TLOA (e khubelu) LED e benya, e bontša mofuta o itseng oa ho se sebetse hantle, ikopanye le tšebeletso ea thuso.
KEKETSO
RECmax P e tlameha ho kenngoa ka har'a phanele ea motlakase kapa sebaka se koaletsoeng ebe e beoa seporong sa DIN.
E na le matšoao a LED a bontšang hore voltage teng. Leha li-LED tsena li sa bonesoa, sena ha se lopolle mosebelisi ho netefatsa hore yuniti e khaotsoe mehloling eohle ea phepelo ea motlakase.
BOHLOKOA!
Ela hloko hore ha sesebelisoa se hokahane, li-terminals li ka ba kotsi ho li ama, 'me ho bula likoahelo kapa ho tlosa likarolo ho ka fana ka monyetla oa ho fumana likarolo tse kotsi ho thetsoa. Se ke oa sebelisa sesebelisoa ho fihlela se kentsoe ka botlalo
BOHLOKOA
Phepelo e thusang ea sesebelisoa e tlameha ho sireletsoa ka li-fuse kapa likarolo tsa ts'ireletso tse loketseng mefuta ea phepelo ea motlakase le tšebeliso. Haholo-holo tšireletso e lokela ho ba le sekhechana se senyenyane sa potoloho se lumellang ho hakoa ha sesebelisoa ho tsoa phepelong ea motlakase ha se sebeletsa.
TS'EBETSO
Maemong a tloaelehileng a ts'ebetso (ha ho leeto), sesebelisoa se na le maemo a latelang:
- Sekhechana sa potoloho se koetsoe, tšoara holimo
- Leqhubu la motlakase (1) fatshe.
- LED e tala e butse le LED e khubelu e tima. (3)
- Tlhahiso ea TRIP, li-terminals 9-10. kgokahano e koetsoeng
- Tlhahiso ea AUX, li-terminals 14-15. puisano e bulehileng
Ha switch ea othomathike e bula ka lebaka la:
- Phoso ea ho kenya motlakase (Short-circuit / Overload)
- Ka bowena theola setshwano sa sekhechana sa potoloho.
- Taelo ea kantle, taolo e hole. Short circuiting O input, terminals 11-12.
- Tobetsa konopo ea TEST/RESET ha ON LED e le tala.
Sesebelisoa se na le maemo a latelang:
- Sekhechana sa potoloho se bulehile, tšoara fatše.
- Leqhubu la motlakase (1) fatshe.
- LED e tala e koetsoe 'me LED e khubelu e butsoitse. (3)
Leseli le benyang le bontša leeto la kamehla. Numella sistimi ea ho koala hape le nako ea metsotso e meraro boitekong bo bong le bo bong ho fihlela ba khathetse (makhetlo a 3). Boiteko bohle bo felile, bo sa feleng OFF LED. Ikopanye feela ka letsoho kapa ka taolo e hole mme sistimi ea ho koala ea othomathike ea tima. Boemo bona bo lula bo bonts'itsoe ka pono (ea sa feleng OFF LED) le kantle (sephetho sa khokahano ea relay). - Tlhahiso ea TRIP, li-terminals 9-10. puisano e bulehileng, ha feela ho ka ba le ho khaoha nakong ea TEST
- Tlhahiso ea AUX, li-terminals 14-15. kgokahano e koetsoeng
Sistimi e khutlela sebakeng sa ho qala ha: - E hokahana ka bo eona ka tatellano ea sistimi e koalang hape (hafeela ho na le khanya ea OFF LED)
- Li-terminals 12-13 (Input I) li koalehile, tatellano ea ka ntle ea mokhoa oa ho koala o itekanetseng.
- Tobetsa konopo ea TEST/RESET ha OFF LED e le khubelu.
Ka linako tse ling ha sekhechana sa potoloho se lokela ho hangoa, se lokela ho khaoloa ebe se notleloa ho thibela ho koaloa hape ka phoso ha mosebetsi o ntse o tsoela pele.
Sistimi e etsa hore monyetla oa ho koala ka boiketsetso o ka thibeloa ka mokhoa oa ho tlosa phini e mosehla, (2).
Nako le nako ha o sebetsa ka har'a mochini oa motlakase o sirelelitsoeng ke RECmax P, ts'ebetso ea sistimi e koalang e tlameha ho hlakoloa ka ho theola switch ka letsoho ebe o tlosa phini e mosehla.
Likarolo tsa tekheniki
| Phepelo ea motlakase | ||||
| E lekantsoeng voltage | 230 V ~ ± 30% | |||
| Khafetsa | 50/60 Hz | |||
| Matla | 4.5 VA | |||
| Sehlopha sa ho kenya | CAT III 300 V | |||
| E lekantsoeng voltage | 230 V ~ ± 30% | |||
| Boholo voltage | 420V ~ | |||
| Bonyane voltage | 90V ~ | |||
| Khafetsa | 50/60 Hz | |||
| Matla a monngoeng | 10 VA | |||
| Motlakase oa nako ea ho koala | <1000 ms | |||
| Enjene ea nako ea ho tsamaea | <10 ms | |||
| Nako ea tšusumetso ea ho koala | > 10 ms | |||
| Nako ea tšusumetso ea ho bula | > 10 ms | |||
| Bophelo ba motlakase | > 20000 maniobras / opereishene | |||
| Tekanyo ea ts'ireletso | IP40 (DIN 40050) | |||
| Hona joale, In (1) | 6, 10, 16, 20, 25, 32, 40, 50, 63 A ~ | |||
| E lekantsoeng voltage, un | 240/415 V ~ | |||
| Bonyane voltage, ub | 12 V~ | |||
| Likoekoete tsa maeto a makenete (1) | C, D, B (moeletsi / moeletsi) | |||
| Nomoro ea ts'ebetso ea mochini / motlakase | > 20000 / 10000 maniobras / ts'ebetso | |||
| Moseho | Cable e bonolo | Cable e thata | ||
| 25 limilimithara2 | 35 limilimithara2 | |||
| Palo ea lipalo (1) | 1 (moeletsi / moeletsi) / 2 / 3 (moeletsi / moeletsi) / 4 | |||
| Ho robeha ha matla (EN 60898) | Lipalo | Moqtage | Icn / Ics | |
| 1 - 4 | 230 / 400 V | 6 kA | ||
|
Ho senya matla (EN 60947-2) |
Lipalo | Moqtage | Icu / Ics | |
| 1 | <60 V | 10 kA | ||
| 2 | <125 V | 30 kA | ||
|
Ho robeha ha matla (EN 60947-2) ~ |
Lipalo | Moqtage | Icu | |
| 1 | 240 V | 10 kA | ||
|
2 |
127 V | 30 kA | ||
| 240 V | 20 kA | |||
| 415 V | 10 kA | |||
| 3 lilemo le 4 | 240 V | 20 kA | ||
| 415 V | 10 kA | |||
| Ha ho na liteko tsa ho koala sistimi hape | 3 | |||
| Nako lipakeng tsa liteko tsa ho koala sistimi hape | 3 mets. | |||
| Nako ea ho khutlisa metha | 30 mets. | |||
| O kenya letsoho, li-terminals 11-12 | Libre de tensión / Moqtage-mahala | |||
| Ke kenya, li-terminals 12-13 | Libre de tensión / Moqtage-mahala | |||
| Tlhahiso ea AUX, li-terminals 14-15 | 0.25 A - 230 V | |||
| Tlhahiso ea TRIP, li-terminals 9-10 | 0.25 A - 230 V | |||
| BONAHALA/TSHA tlhahiso, li-terminals 16-17-18 | 0.5 A - 230 V | |||
| Mocheso oa ho sebetsa | -20ºC… +70ºC | |||
| Mongobo o amanang (o sa fokotseheng) | 5 … 95% | |||
| Boholo ba bophahamo | 2000 m | |||
| Tekanyo ea ts'ireletso | IP20 | |||
| Bokgoni ba ho tima | V0 (UL) | |||
| Likokoana-hloko | M3 | |||
| Matla a ho kenya palo ka 'ngoe | boholo 3N | |||
| Matla a ho hula ka palo | mets 5N | |||
| Torque e khothalletsoang | 0.5 / 0.6 Nm | |||
| Bolelele ba thapo e kentsoeng e hlobotsoeng | 6 - 7.5 limilimithara | |||
| Maximum cross-section | Cable e thata | Cable e bonolo | ||
| 0.05 - 2.5 mm2 | 0.05 - 1.5 mm2 | |||
| Boholo ba hona joale | 10 A | |||
| Kopana le khanyetso | 15 mΩ | |||
| Insulation resistance | 1000 GΩ (500 V ) | |||
| Sephutheloana (EN50022) | Carril / terene DIN 46277 | |||
| Litekanyo | Mokhahlelo o le mong | Mekhahlelo e meraro | ||
| 4.5 modulos / modules | 6.5 modulos / modules | |||
| Boima ba 'mele | 550 gr | 800 gr | ||
| Sekoahelo | PC + FV | |||
Litekanyetso: IEC 60898 , IEC 60947-2
Ho latela mohlala:
E fetile liteko tsa 3 tsa ho koala hape, tsamaiso e tla thibeloa. Naha e tla tšoauoa sebakeng sa heno ke OFF LED le kantle ho mabitso a thusang. Hoa hlokahala ho seta bocha ka letsoho kapa ka remote control.
Litekanyo
Ho kenya mohato o le mong - lipalo tse 2
Ho kenngoa ha mekhahlelo e meraro - lipalo tse 4
Theminale likamano mabitso
1, 3 Phepelo ea motlakase 9 TRIP output (Tse tlwaelehileng) 10 TRIP output (NC) 11 Kenyeletso ya O (NO) 12 Kenyeletso ea O - ke kenya (E tloaelehileng) 13 Ke kenya (NO) 14 Tlhahiso ea AUX (E tloaelehileng) 15 Tlhahiso ea AUX (NO) 16 ON/OFF tlhahiso (Tse tlwaelehileng) 17 ON/OFF tlhahiso (NC) 18 ON/OFF tlhahiso (NO) 
Motlakase oa motlakase oa NL o ka 'na oa e-ba ka ntle ho ts'ebetso e lokelang ho sireletsoa, empa ha ho joalo o tlameha ho hokahanngoa ho ea tlaase ho tloha mochine o moholo.
Etsa bonnete ba hore khokahano ea Neutral conductor e entsoe joalo ka ha ho boletsoe litšoantšong tsa khokahano tataisong ena.
Tšebeletso ea tekheniki
CIRCUTOR SAT: 902 449 459 (SPAIN) / (+34) 937 452 919 (ho tsoa Spain)
Vial Sant Jordi, s/n
08232 - Viladecavalls (Barcelona)
Mohala: (+34) 937 452 900 – Fax: (+34) 937 452 914
lengolo-tsoibila : sat@circutor.com
Tlhokomeliso: Litšoantšo tsa lisebelisoa ke tsa litšoantšo feela 'me li ka fapana le tsa sebele.
Litokomane / Lisebelisoa
 |
Circutor RECmax P Phetoho e Ikemetseng bakeng sa Sistimi ea ho Koala e Iketsetsang [pdf] Buka ea Taelo RECmax P, Phetoho e Ikemetseng bakeng sa Sistimi ea ho Koala e Iketsetsang |
