Circutor RECmax P Tsis Siv Neeg Hloov rau Ib Daim Ntawv Qhia Txog Kev Siv Rov Qab Rov Qab

Circutor RECmax P Tsis Siv Neeg Hloov rau Ib Daim Ntawv Qhia Txog Kev Siv Rov Qab Rov Qab

Phau ntawv no yog RECmax P qhia kev teeb tsa. Yog xav paub ntxiv, thov download tau phau ntawv qhia tag nrho los ntawm CIRCUTOR web qhov chaw: www.circutor.com

TSEEM CEEB!

Cov cuab yeej yuav tsum raug txiav tawm ntawm nws cov khoom siv hluav taws xob (cov khoom siv hluav taws xob thiab kev ntsuas) ua ntej ua kev teeb tsa, kho lossis tuav haujlwm ntawm lub cuab yeej sib txuas. Hu rau qhov kev pab cuam tom qab muag yog tias koj xav tias muaj kev ua haujlwm tsis raug ntawm lub cuab yeej. Cov cuab yeej tau tsim los hloov tau yooj yim thaum muaj kev ua haujlwm tsis zoo.

Cov chaw tsim khoom ntawm cov cuab yeej tsis muaj lub luag haujlwm rau kev puas tsuaj uas tshwm sim los ntawm kev ua tsis tiav los ntawm tus neeg siv lossis tus neeg siv los ua raws li cov lus ceeb toom thiab / lossis cov lus pom zoo tau teev tseg hauv phau ntawv no, tsis yog rau kev puas tsuaj los ntawm kev siv cov khoom tsis yog thawj zaug lossis cov khoom siv lossis cov khoom tsim. los ntawm lwm cov manufacturers.

Cov ntsiab lus zais

7 Cov ntaub ntawv / Cov ntaub ntawv

7.1 Cov ntaub ntawv

8 Related Posts

Kev piav qhia

RECmax P yog hluav taws xob DC lub cev muaj zog uas tswj cov kev cuam tshuam cuam tshuam. Nws yog Circuit Court breaker nrog tsis siv neeg reclosing system los tiv thaiv thiab rov kaw cov khoom siv hluav taws xob. Nws yog ib txwm siv nyob rau hauv kev teeb tsa uas xav tau hluav taws xob txuas ntxiv nrog kev saib xyuas me ntsis.

Nws muaj ob voltage-dawb sab nraud teeb liab inputs uas yuam kom qhib thiab kaw tom ntej (rov kaw qhov system) ntawm qhov hloov pauv tsis siv neeg.

Nws muaj ob qhov kev sib tiv tauj ib zaug los qhia cov xwm txheej thiab ua rau qhib qhov hloov pauv tsis siv neeg.

Cheebtsam
1	Lub lever yog siv los rov kaw lub ntsiab hloov. Lub default position ntawm lub lever yog down. Nyob rau hauv rooj plaub ntawm rov kaw, lub lever yog tsa los ntawm ib tug motorized tsav, uas txuas lub ntsiab hloov. Tom qab rov kaw, lub cev muaj zog tsav lub zog rov qab mus rau qhov chaw qis
2	Locking system: Lub kaw lus muaj lub tshuab xauv lub tshuab kom tsis txhob rov sib txuas ntawm lub ntsiab hloov, yog li overriding qhov kev xaiv rov kaw tsis siv neeg Nco tseg : Lub ntsuas phoo tuaj yeem ntsuas qhov ntsuas qhov ntsuas
3	Pem hauv ntej ntawm motorized maub los: laub-khawm
4	Circuit Court breaker zog tiv tauj.
5	Hauv qab plug-in terminals teeb: TRIP (9,10): NC tso zis Manual-Test O (11,12): Isolated input for trip, voltage dawb. Kuv (12,13): Isolated input for restart, voltage dawb. AUX (14,15): TSIS tso zis
6	Sab saum toj plug-in terminals teem ON / OFF (16,17,18): Circuit Breaker xwm txheej.
7	Sab saum toj plug-in terminals teem LN (1,3): Fais fab mov

Qhov taw qhia

1	LED ON (ntsuab) lub Circuit Court breaker raug kaw
2	TEST/RESET/TEST/RESET laub-khawm Khawm muaj ob txoj haujlwm nyob ntawm seb qhov xwm txheej dhau los ntawm Circuit Court breaker
3	LED OFF (Liab) lub Circuit Court breaker yog qhib

Yog tias ON (ntsuab) thiab OFF (liab) LED yog blinking, qhia qee hom kev ua haujlwm tsis zoo, hu rau qhov kev pab cuam.

INSTALLATION

RECmax P yuav tsum tau muab tso rau hauv ib lub vaj huam sib luag hluav taws xob lossis lub qhov rooj thiab ntsia rau ntawm DIN rail.

Nws muaj LEDs qhia signaling tias voltage yog tam. Txawm hais tias cov LEDs tsis nyob rau, qhov no tsis tuaj yeem txo tus neeg siv los ntawm kev txheeb xyuas tias chav tsev raug txiav tawm ntawm txhua qhov chaw siv hluav taws xob.

TSEEM CEEB!

Ua tib zoo xav tias thaum lub cuab yeej txuas nrog, cov terminals tej zaum yuav muaj kev phom sij rau qhov kov, thiab qhib lub npog lossis tshem tawm cov ntsiab lus yuav muab kev nkag mus rau qhov chaw uas muaj kev phom sij rau qhov kov. Tsis txhob siv lub cuab yeej kom txog thaum nws tag nrho ntsia

TSEEM CEEB

Cov cuab yeej pab txhawb nqa yuav tsum muaj kev tiv thaiv nrog fuses lossis cov khoom tiv thaiv uas tsim nyog rau cov khoom siv hluav taws xob thiab kev siv. Qhov zoo dua qhov kev tiv thaiv yuav tsum muaj lub tshuab hluav taws xob me me uas tso cai rau kev txiav tawm ntawm cov khoom siv hluav taws xob thaum muaj kev pabcuam.

Kev ua haujlwm

Hauv kev ua haujlwm ib txwm muaj (tsis muaj kev mus ncig), lub cuab yeej muaj cov xwm txheej hauv qab no:

Circuit Court breaker kaw, tuav
Lub cev muaj zog (1) nqes.
Ntsuab LED rau thiab liab LED tawm. (3)
TRIP tso zis, terminals 9-10. kaw kev sib cuag
AUX tso zis, terminals 14-15. qhib kev sib cuag

Thaum lub tshuab hluav taws xob tsis siv neeg qhib vim:

Ib qho txhaum hauv kev teeb tsa hluav taws xob (Short-circuit / Overload)
Manually txo lub Circuit Court breaker kov.
Kev txiav txim sab nraud, tswj chaw taws teeb. luv Circuit Court O input, terminals 11-12.
Push TEST/RESET khawm thaum ON LED yog ntsuab.

Cov cuab yeej muaj cov xwm txheej hauv qab no:

Circuit Court breaker qhib, tuav cia.
Lub cev muaj zog (1) nqes.
Ntsuab LED tawm thiab liab LED rau. (3)
Lub teeb flashing qhia txog kev mus txawv tebchaws. Ua kom tsis siv neeg rov kaw qhov system thiab peb feeb timer hauv txhua qhov kev sim kom txog thaum lawv tag (3 zaug). Tag nrho cov kev sim siab, ruaj khov OFF LED. Tsuas yog rov txuas manually lossis los ntawm cov chaw taws teeb tswj thiab lub kaw lus rov qab tsis siv neeg raug kaw. Lub xeev no tseem qhia pom qhov muag (tsis tu ncua OFF LED) thiab sab nraud (relay contact output).

TRIP tso zis, terminals 9-10. qhib kev sib cuag, tsuas yog thaum muaj kev cuam tshuam thaum lub sij hawm TEST
AUX tso zis, terminals 14-15. kaw kev sib cuag
Lub kaw lus rov qab mus rau qhov chaw pib thaum:

Nws tau rov txuas dua los ntawm cov txheej txheem rov qab ua ke (tsuas yog nyob rau hauv cov ntaub ntawv ntawm flashing OFF LED)
Terminals 12-13 (Input I) kaw, kev txiav txim sab nraud ntawm qhov tsis siv neeg rov kaw qhov system.

Nias qhov TEST/RESET tus yuam sij thaum OFF LED liab.

Nyob rau qee lub sijhawm thaum lub Circuit Court breaker yuav tsum raug txiav, nws yuav tsum tau txiav thiab kaw tom qab kom tsis txhob muaj kev sib tsoo thaum lub sijhawm ua haujlwm.

Lub kaw lus ua kom muaj peev xwm ntawm kev rov qab tsis siv neeg tuaj yeem tiv thaiv los ntawm kev tshem tus pin daj, (2).
Thaum twg los xij ua haujlwm hauv kev teeb tsa hluav taws xob tiv thaiv los ntawm RECmax P, lub kaw lus rov qab ua haujlwm yuav tsum raug tshem tawm los ntawm kev txo qis tus lej hloov thiab tom qab tshem tus pin daj.

Technical nta

Fais fab mov
Nyob voltage	230V ~ ± 30%
Ntau zaus	50 / 60 Hz
Hwj chim	4.5 VAJ
Installation qeb	CAT III 300 V
Nyob voltage	230V ~ ± 30%
Qhov siab tshaj plaws voltage	420 V ~ ib
Yam tsawg kawg nkaus voltage	90 V ~ ib
Ntau zaus	50 / 60 Hz
Absorbed zog	10 VAJ
Kaw lub sijhawm lub cev muaj zog	<1000 ms
Tripping lub sij hawm motor	<10 ms
Impulse lub sijhawm kaw	> 10 ms
Impulse lub sijhawm qhib	> 10 ms
Hluav taws xob lub neej	> 20000 maniobras / ua haujlwm
Kev tiv thaiv qib	IP40 (DIN 40050)
Tam sim no, In (1)	6, 10, 16, 20, 25, 32, 40, 50, 63 A ~
Nyob voltage, ib	240 /415 V ~
Yam tsawg kawg nkaus voltage, ub	12 V ~
Sib nqus taug kev nkhaus (1)	C, D, B (consultar/consult)
No. ntawm mechanical / hluav taws xob ua haujlwm	> 20000 / 10000 maniobras / ua haujlwm
Hla ntu	Flexible cable		Rigid kab
	25mm 2		35mm 2
Tus naj npawb ntawm tus ncej (1)	1 (consultar /consult) / 2 / 3 (consultar /consult) / 4
Kev muaj peev xwm tawg (EN 60898)	Ncej	Voltage		Ib / Ics
	1–4 : kuv	230/400 V		6k ua
Kev tawg muaj peev xwm (EN 60947-2)	Ncej	Voltage		Ib / Ics
	1	<60 V		10k ua
	2	<125 V		30k ua
Kev muaj peev xwm tawg (EN 60947-2) ~	Ncej	Voltage		Icu
	1	240 V		10k ua
	2	127 V		30k ua
		240 V		20k ua
		415 V		10k ua
	3 y/ua 4	240 V		20k ua
		415 V		10k ua
Tsis muaj kev rov kaw qhov system sim	3
Lub sijhawm nruab nrab ntawm kev rov kaw qhov system sim	3 feeb.
Meter rov pib lub sijhawm	30 feeb.
O input, terminals 11-12	Libre de tensión / Voltage-dawb
Kuv input, terminals 12-13	Libre de tensión / Voltage-dawb
AUX tso zis, terminals 14-15	0.25 A - 230 V
TRIP tso zis, terminals 9-10	0.25 A - 230 V
ON/OFF tso zis, terminals 16-17-18 Ib	0.5 A - 230 V
Ua haujlwm kub	-20ºC… +70ºC
Relative humidity (tsis-condensing)	5… 95%
Qhov chaw siab tshaj plaws	2000m ua
Kev tiv thaiv qib	IP20
Self-extinguishing muaj peev xwm	V0 (UL)
Ntsia hlau	M3
Insertion quab yuam rau ib tug ncej	max 3 n
Tshem tawm quab yuam ib tus ncej	nqi 5n
Pom zoo torque	0.5 / 0.6 Nm
Length ntawm stripped insertion cable	6-7.5 hli
Qhov siab tshaj plaws hla ntu	Rigid kab		Flexible cable
	0.05-2.5 hli 2		0.05-1.5 hli 2
Qhov siab tshaj plaws tam sim no	10 A
Tiv tauj tiv thaiv	15 mΩ
Rwb thaiv tsev tsis kam	1000 GΩ (500 V)
Daim ntawv txuas (EN50022)	Carril / tsheb ciav hlau DIN 46277
Qhov ntev	Ib-theem		Peb theem
	4.5 Modulos / modules		6.5 modulos / modules
Qhov hnyav	550 gr		800 gr
Enclousure	PC + FV

Cov qauv: IEC 60898, IEC 60947-2

Nyob ntawm tus qauv:

Tshaj 3 sim rov qab kaw, lub kaw lus yuav raug thaiv. Lub xeev yuav raug teeb liab hauv zos los ntawm OFF LED thiab sab nraud los ntawm cov neeg pab cuam. Yuav tsum tau pib dua manually lossis los ntawm cov chaw taws teeb tswj.

Qhov ntev

Ib-theem installation - 2 ncej

Peb-theem installation - 4 ncej

Terminal kev sib txuas npe
1, 3	Fais fab mov
9	TRIP tso zis (Common)
10	TRIP tso zis (NC)
11	O tswv yim (NO)
12	O input – Kuv input (Common)
13	Kuv input (NO)
14	AUX tso zis (Common)
15	AUX tso zis (NO)
16	ON/OFF tso zis (Common)
17	ON/OFF tso zis (NC)
18	ON/OFF tso zis (NO)

theem installation

NL cov khoom siv hluav taws xob tuaj yeem yog sab nraud rau kev teeb tsa los tiv thaiv, tab sis tsis muaj teeb meem nws yuav tsum tau txuas nrog qis qis los ntawm lub ntsiab hloov.

Xyuas kom tseeb tias qhov kev sib txuas nruab nrab ntawm tus neeg xyuas pib tau ua raws li tau teev tseg hauv daim duab sib txuas hauv phau ntawv qhia no.

Kev pabcuam

CIRCUTOR SAT: 902 449 459 (SPAIN) / (+34) 937 452 919 (tawm ntawm Spain)
Vial Sant Jordi, s/n
08232 - Viladecavalls (Barcelona)
Tel: (+34) 937 452 900 – Fax: (+34) 937 452 914
e-mail : sat@circutor.com

Nco tseg: Cov duab ntawm lub cuab yeej yog rau kev piav qhia nkaus xwb thiab yuav txawv ntawm lub cuab yeej tiag tiag.