bodet logoTS'OANELO TIMER MOLAOLI
TS'OANA TS'OANE
Taolo ea Nako ea Setaele - Selaoli sa Sebali sa Setaele sa Flush
Buka ea ho kenya le ho sebetsa

 

bodet SETABO SA TIMER BOLAOLI

Litaba pata
1 LIEKETSENG
2 KEKETSO
3 TS'EBETSO
4 LIEKETSENG TS'OANELO
5 Litokomane / Lisebelisoa
5.1 Litšupiso
6 Related Posts

LIEKETSENG

1.1.Tlhahiso ea sehlahisoa
Molaoli o sebelisoa ho khetha mokhoa oa ho sebetsa (mokhoa oa CLOCK kapa COUNTER mode) oa lioache tsa digital tse amanang le tsona.
Ka mokhoa oa CLOCK, oache ea digital e bonts'a nako ea sebaka seo 'me ka mokhoa oa COUNTER, oache e ka sebelisoa e le STOPWATCH (ho bala ho ea holimo) kapa e le TIMER (ho bala ho theoha).
Selaoli se ka kenngoa ka li-buttons tse nang le marang-rang Qala / Emisa 'me U seta Botjha (bolelele bo boholo ba thapo = 20m).
Molaoli o na le relay e kentsoeng qetellong ea palo (holimo kapa tlase) e ka sebelisoang ho laola molumo kapa lebone la temoso.
Li-LED tse tala li sebelisetsoa ho khetholla mokhoa oa ho sebetsa.
Ho na le mefuta e 2 ea li-controller:

- mofuta oa ho kenya lebota – mofuta oa flush mounting
bodet STYLE TIMER CONTROLLERS - FIG 1 bodet STYLE TIMER CONTROLLERS - FIG 2

Taolo e tsamaellana le mefuta ea hajoale le ea pele ea lioache tsa Setaele.

1.2. Synoptic

bodet STYLE TIMER CONTROLLERS - FIG 3

KEKETSO

Leproduit e tlameha ho kenngoa feela ke basebetsi ba tšoanelehang le ba lumelletsoeng.
2.1. Ho kenya lebota

  1. Etsa likoti tse 4 Ø5 mm ho ea ka litekanyo tse latelang ebe u kenya li-plug tsa lebota.bodet STYLE TIMER CONTROLLERS - FIG 4
  2. Bula mapheo a mahlakoreng ka bobeli ho fihlella masoba A.bodet STYLE TIMER LAWULI - FIG5
  3. Sebelisa likurufu tse 4 Ø3.5 mm ho kenya selaoli leboteng.
  4. Koala molaoli.
    Molaoli o romelloa ka thapo ea limithara tse 5 e seng e kentsoe.
    HLOKOMELA: Haeba ho sebelisoa likonopo tsa Remote Start/Stop and Reset kapa tsa lebone la buzzer/indicator, bula molaoli e le hore u khone ho fihlella lihokelo tse bontšitsoeng ka tlase. Ho bula sekoahelo, notlolla mahlakore ka bobeli ka nako e le 'ngoe.

Likhothaletso

bodet STYLE TIMER CONTROLLERS - FIG 6

2.2. Ho kenya metsi
Molaoli o romelloa ka thapo ea limithara tse 5 e seng e kentsoe.

  1. Etsa sekheo leboteng kapa karohano ho latela mohlala o latelang:bodet STYLE TIMER CONTROLLERS - FIG 7
  2. Kenya li-plug tse peli tsa lebota Ø2
  3. Hlakola thapo ka sehiloeng ebe u lokisa molaoli leboteng ka li-screw tse 2 Ø3.5. Sebelisa silicon ho etsa bonnete ba ho thibela metsi.

HLOKOMELA: Haeba ho sebelisoa likonopo tsa Remote Start/Stop and Reset kapa tsa lebone la buzzer/indicator, tlosa sekoaelo se ka morao hore u fihlelle lihokelo tse bontšitsoeng ka tlase. Ho etsa joalo tlosa li-screw ka bobeli A.bodet STYLE TIMER CONTROLLERS - FIG 8

bodet STYLE TIMER CONTROLLERS - FIG 9

2.3 Likhokelo tsa motlakase
Taolo ea oache ea Setaele
Hokela thapo ho tloha ho molaoli ho ea ho sehokelo kareteng ea oache, ho ela hloko ho ts'oana le 'mala oa lithapo ho bontšitsoe ka tlase:

bodet STYLE TIMER CONTROLLERS - FIG 10

Taolo ea lioache tsa Style tse ngata
Ho fihlela lioache tse 10 li ka hokeloa ho molaoli. Lioache tse 10 kaofela li tla bontša ntho e tšoanang.

bodet STYLE TIMER LAWULI - FIG11

TS'EBETSO

3.1. Boitsebiso ba linotlolobodet STYLE TIMER LAWULI - FIG12

- Senotlolo sa DOWN: khetha mokhoa oa TIMER (ho bala).
- Senotlolo sa CLOCK: khetha mokhoa oa HOUR (pontšo ea nako ea lehae).
- Senotlolo sa UP: khetha mokhoa oa STOPWATCH (ho bala ho ea holimo).
Haufi le e 'ngoe le e 'ngoe ea linotlolo tse 3 ho na le li-LED tse fetohang botala ho tsebisa mosebelisi hore na ke mofuta ofe o sebetsang.
Linotlolo tsa ho seta mokhoa.
Linotlolo tsena li sebetsa feela ka mokhoa oa ho boloka nako (ho bala kapa ho bala ho theoha):
- HOUR - MIN le SEC linotlolo: ho beha lihora, metsotso le metsotsoana ka mekhoa ea ho bala (ho bala ho ea holimo kapa ho bala ho theoha).
- Reset senotlolo: e sebetsa feela ka mokhoa oa ho bala (ho ea holimo kapa tlase) le ha mokhoa ona o emisoa. E seta khaontara bocha ho 0 ka mokhoa oa stopwatch le boleng ba ho qala ka mokhoa oa nako.
- Senotlolo sa SPLIT: se etsa hore ho khonehe ho bonts'a nako e fetileng ka metsotsoana e 5. Senotlolo sena se sebetsa feela ka mekhoa ea ho bala.
– QALA/ETSA konopo: qala le ho emisa mokhoa oa ho bala.

3.2. Mokhoa oa HOUR / COUNTER mode
Ka mokhoa oa HOUR, oache ea Setaele e bonts'a nako ea lehae ea hajoale. Ka mokhoa ona, boemo ba counter (ho matha kapa ho emisa) bo bolokiloe.
Senotlolo sa CLOCK se lumella mosebelisi ho fetoha lipakeng tsa COUNTER mode le HOUR mode le ka tsela e fapaneng.

  • Ka mokhoa oa HOUR ho bonesoa feela LED ea CLOCK e tala.
  • Boemong ba STOPWATCH ho bonesoa feela UP LED e tala (kapa DOWN ka mokhoa oa TIMER).
  • Ts'ebetsong e tloaelehileng, ke LED e le 'ngoe feela e ka khantšang ka nako e le' ngoe.

HLOKOMELA: Ha khaonta e ntse e sebetsa, ho khutlela ho counter mode ka mor'a ho tloha ho counter mode ho ea ho hora e tla lula e le ea mohlala oa pele: UP> CLOCK> UP kapa DOWN> CLOCK> TLAS

3.3. STOPWATCH mode
Khaontareng e tloha ho 0 ho ea ho boleng bo hlophisitsoeng (boleng bo phahameng ka ho fetesisa: 23 : 00 00)bodet STYLE TIMER LAWULI - FIG13

  • Ho tobetsa QALA/EMA nakong ea SPILLED = Bontša boleng bo emisitsoeng.
  • Likonopo tsa SPLIT le RESET lia koaloa ha khaonta e ntse e sebetsa.
  • Khaontara e lula e sebetsa le ha mokhoa o fetoletsoe ho HOUR.

3.4. Mokhoa oa TIMER
Khaontara e bala ho tloha ho boleng bo hlophisitsoeng (boleng ba kamehla 23: 00 00) ho isa ho 0.

bodet STYLE TIMER CONTROLLERS - FIG 14

  • Ho tobetsa QALA/EMA nakong ea SPILLED = Bontša boleng bo emisitsoeng.
  • Likonopo tsa SPLIT le RESET lia koaloa ha khaonta e ntse e sebetsa.
  • Khaontara e lula e sebetsa le ha mokhoa o fetoletsoe ho HOUR.

3.5. Qetello ya Palo/ Ho balla fatshe
Khaontareng e ema ha:
- boleng ba MAX bo fihlelleha ka mokhoa oa STOPWATCH,
- 0 e fihletsoe ka mokhoa oa TIMER.
Qetellong ea palo, relay e kentsoe tšebetsong

3.6. Ho fetola pakeng tsa Stopwatch mode le Nako ea nako
Motho a ka fetola lipakeng tsa mekhoa ea ho bala ka nako efe kapa efe ka ho tobetsa likonopo tsa DOWN le UP ho sa tsotelehe hore na khaontara e ntse e sebetsa kapa e emisitsoe.bodet STYLE TIMER CONTROLLERS - FIG 15

3.7. Mekhoa ea ho fetisa
Ho na le mekhoa e 3 ea ho sebetsa ea relay:
Mokhoa oa 1: tataiso
Qetellong ea palo (holimo kapa tlase) relay e kentsoe tšebetsong 'me e lula e kentsoe tšebetsong.
Ke feela ka ho tobetsa START/STOP moo relay e ka timang.
Ho qala palo e ncha, tobetsa RESET le QALA/EMA.
Mokhoa oa 2: ke nako
Qetellong ea palo (holimo kapa tlase) relay e kentsoe tšebetsong nako e lokiselitsoeng ho tloha ho 0 ho isa ho 59s (tekanyo ea kamehla e behiloe ho 5s).
Ke feela ka ho tobetsa START/STOP moo relay e ka koaloang ka letsoho haeba tieho ea 5s e sa fela.
Ho qala palo e ncha, tobetsa RESET ebe o qala/EMA.
Mokhoa oa 3: nako ea othomathike
Qetellong ea palo (holimo kapa tlase) relay e kentsoe tšebetsong nako e lokiselitsoeng ho tloha ho 0 ho isa ho 59s (tekanyo ea kamehla e behiloe ho 5s).
Qetellong ea tieho ea 5s, k'haonta e tla tsosolosoa ka bo eona.
Ho qala palo e ncha, tobetsa QALA/EMA. (RESET ea k'haontareng e etsoa ka bo eona).

3.8. Litlhophiso tsa parameter ea relay
Ho fihlella setegeniki sa menu tobetsa Seta Botjha pele ebe Qala/Emisa ebe o tobetsa dikonopo ka bobedi bakeng sa metsotswana e 7.bodet STYLE TIMER CONTROLLERS - FIG 16

3.9. Ho beha boholo ba boleng ba khaontara
Ho beha boleng ba MAX ba k'haontareng (hora, motsotso, le motsotsoana) k'haontane e tlameha ho emisoa le ho hlophisoa bocha.
Ka STOPWATCH mode (UP), khaontara e tlameha ho hlahisa “00: 00 00”
Ka mokhoa oa TIMER (TLASE) k'haontareng e tlameha ho bonts'a boleng bo phahameng "23: 00 00" (boleng ba kamehla)bodet STYLE TIMER CONTROLLERS - FIG 17

3.10. Ho boloka liparamente
Paramethara e 'ngoe le e' ngoe e bolokiloe mohopolong oa ka hare, ka hona, data e latelang e bolokiloe haeba matla a ka senyeha:

  1. MAX boleng,
  2. Mokhoa oa ho fetisa,
  3. Boleng ba tieho ea relay.

3.11. Backup ea boleng ba counter
Haeba motlakase o ka felloa ke nako, k'haontareng e tsoela pele ho sebetsa ka metsotso e ka bang 3. Ha motlakase o khutlisetsoa nakong ea metsotso e 3, ho bala ho tsoela pele ntle le ho lahleheloa ke motsotsoana.
Haeba ka nako ea ho hloleha ha motlakase k'haontareng e fihlile pheletsong ea ho bala ha motlakase o khutlisetsoa morao, khaontara e tla emisoa 'me relay e tla kengoa tšebetsong ho latela maemo a paramente.

LIEKETSENG TS'OANELO

4.1. Litekanyo
Mofuta oa lebota

bodet STYLE TIMER CONTROLLERS - FIG 18

4.2. Litšobotsi tsa theknoloji

Thempereichara ea ho sebetsa ………… -5°C ho ea +55°C
Tshireletso…………………………… Beshene ea lebota: IP55/IK03
Mofuta oa Flush: IP65/IK03
Phepelo ea motlakase………………………… 15 VDC e fanoa ke oache
Tšebeliso e phahameng ……………… 30 mA
Boima ………………………………………. Mofuta oa lebota: 133 g
Mofuta oa Flush: 190 g
Kaho……………………………… Beshene ea lebota: Casing ea polycarbonate
Letlapa la polyester
Mofuta oa Flush: Panele e ka pele ea tšepe e sa hloekang
Aluminium sekoahelo se ka morao
Letlapa la polyester

Sehlahisoa se latela litaelo tse latelang:
– EMC 2014/30/EU
- LVD 2014/35 / EU
Sehlahisoa sa flush mounting version se lumellana le litlhoko tsa ho hloekisa lipetlele.

bodet logowww.bodet-time.com
BODET Nako & Lipapali
49340 TREMENTINES I Fora
Mohala tšehetso thomelontle: +33 241 71 72 33bodet STYLE TIMER CONTROLLERS - LOGO 3bodet STYLE TIMER CONTROLLERS mSetšoantšo sa 608466D
Ha u amohela thepa ka kopo sheba hore ha ho letho le robehileng ho seng joalo etsa tleleime haufi le k'hamphani ea likepe.

Litokomane / Lisebelisoa

bodet SETABO SA TIMER BOLAOLI [pdf] Tlhophiso Tataiso
BOLAOLI BA TIMER SETAELO, BA LAOLI BA TIMER

Litšupiso

Related Posts

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *