AXXESS AXDIS-GMLN31 GM Data Interface le SWC 2019-Up Instruction Manual

Camaro (IOR) *** †	2019-Ho ea holimo	Cruze	2019-Ho ea holimo	Silverado (IOR) †	2019-Ho ea holimo
Cheyenne (IOR) †	2019-Ho ea holimo	Equinox (IOR) †	2019-Ho ea holimo	Sonic	2019-Ho ea holimo
Colorado (IOR)	2019-Ho ea holimo	Malibu (IOR) †	2019-Ho ea holimo	Spark (IOR)	2019-Ho ea holimo

GMC

Canyon (IOR)	2019-Ho ea holimo
Sierra 1500 (IOR) †	2019-Ho ea holimo
Sebaka (IOR) †	2019-Ho ea holimo

LITS'ELISO HLOKA

Wirecutter

Sesebelisoa sa Crimp
Sethunya sa solder

Theipi
Lihokelo (example: li-connect-butt, li-caps, joalo-joalo)

Sekoti se sephara se sephara se senyane

Lintlha tsa Sehlahisoa

http://axxessinterfaces.com/product/AXDIS-GMLN31

LIKELETSO KHOLO

Ho tloha ho marapo a linotši tse 16 ka ho hlobolisoa ho isa ho seea-le-moea sa morao-rao:

Connect the Khubedu terata ho terata ya sesebedisoa.

Haeba radio ea aftermarket e na le terata ea lebone, hokela Orange/Tšweu terata ho eona.
Hokela terata ea Gray ho sebuela-pele se nepahetseng se ka pele.

Connect the Boputsoa/Botsho terata ho tsoa ho sebui se fosahetseng se ka pele.
Connect the Bosoeu terata ka lehlakoreng le letšehali le hlahisang sebui se nepahetseng.
Connect the white / E ntsho terata ho ea ka lehlakoreng le letšehali la sebui se fosahetseng.
Lithapo tse latelang (3) ke tsa liea-le-moea tsa multimedia/navigation feela tse hlokang likhoele tsena.
Connect the Boputsoa/Pinki terata ho VSS / speed sense terata.
Connect the Botala/ Pherese terata ho ea mohala o ka morao.
Hokela Lesedi Botala terata ho terata ea mariki ea ho paka
Tlosa 'me u hlokomolohe mehala e latelang (5), e ke ke ea sebelisoa ts'ebetsong ena:
Botala / Bosoeu, Botala, Botala/Botsho, Purple, le Purple/ Botsho.

Ho tloha ho har'a AXIS-GMLN31 ho ea seea-le-moeeng sa morao-rao:

Hokela terata e Ntšo ho terata ea fatše.
Hokela terata e Yellow ho terata ea betri.
Hokela terata e Tala karolong e ka morao e ka morao ea sepikara se nepahetseng.
Hokela terata e Tala/e Ntšo le leqeleng le letšehali la sebuela-pele se fosahetseng.
Hokela terata ea Purple ho sebuela-pele se nepahetseng se ka morao.
Hokela terata ea Purple/Black ho sebuela-hole se ka morao se ka morao.
Hokela jeke e mosehla ea RCA ho 'Rear Camera' ea radio ea 'maraka.

Tlhokomeliso: Relay e hokelletsoeng holim'a marapo ke ea ho tobetsa feela ka molumo o hlakileng. Ha ho na mehato e meng e hlokahalang ho boloka tšobotsi ena, kahoo tlohela relay kamoo e leng kateng.
Tsoela pele ho 3.5mm jack sterering wheel retention

MAKHOKANO A TLA ETSOA (TSOA)

3.5mm ho boloka lebili la jack wheel wheel control:

Jack ea 3.5mm e tla sebelisoa ho boloka li-control tsa molumo lebiling la setereng.
Bakeng sa liea-le-moea tse thathamisitsoeng ka tlase, hokela sehokelo sa basali sa 3.5mm se nang le lithapo tse hlobotsoeng, ho jack ea 3.5mm SWC e tona ho tloha ho harness ea AXDIS-GMLN31. Mehala efe kapa efe e setseng e theiloe 'me ha e hlokomeloe.
Eclipse: Hokela terata e laolang mabili, hangata e Brown, ho Bosootho/Bosweu terata ya sehokedi. Ebe o kopanya terata e setseng ea taolo ea lebili, ka tloaelo Bosootho/Bosoeu, ho terata e sootho ea sehokelo.

Metra OE: Hokela terata ea lebili la setereng Key 1 (Grey) ho terata e Brown.
Kenwood kapa khetha JVC ka terata e tsamaisang lebili la setereng: Connect the Boputsoa/Bosehla terata ho terata e sootho.
Tlhokomeliso: Haeba seea-le-moea sa hau sa Kenwood se iphumana se le JVC ka letsoho beha mofuta oa radio ho Kenwood. Sheba litaelo tlasa ho fetola mofuta oa radio.
XITE: Hokela terata ea mabili a tsamaisang SWC-2 ho tloha seea-le-moeeng ho ea terateng ea Brown.

Parrot Asteroid Smart kapa Letlapa: Hokela jack ea 3.5mm ho AXSWCH-PAR (e rekisoang ka thoko), ebe o hokela sehokelo sa 4-pin ho tloha AXSWCH-PAR ho ea seea-le-moeeng.
Tlhokomeliso: Seea-le-moea se tlameha ho ntlafatsoa ho ts. 2.1.4 kapa software e phahameng.
Seea-le-moea sa "2 kapa 3" ea bokahohle: Hokela terata ea taolo ea lebidi la setereng, eo ho thoeng ke Key-A kapa SWC-1, ho terata e Brown ea sehokedi. Ebe o hokela terata e setseng ea taolo ea mabili, e bitsoang Key-B kapa SWC-2, ho terata ea Brown / White ea sehokedi. Haeba seea-le-moea se tla le terata ea boraro bakeng sa mobu, hlokomoloha terata ena.
Tlhokomeliso: Kamora hore khokahano e hlophiselitsoe koloing, sheba bukana e fanoeng le seea-le-moea bakeng sa ho abela likonopo tsa SWC. Ikopanye le moetsi oa seea-le-moea bakeng sa tlhaiso-leseling e batsi.
Bakeng sa liea-le-moea tse ling kaofela: Hokela jacke ea 3.5mm ho tloha ho har'a AXDIS-GMLN31 ho jekong seea-le-moea sa 'maraka se etselitsoeng sebopeho sa taolo ea lebili la kantle. Ka kopo, sheba bukana ea liea-le-moea tsa aftermarket haeba u na le pelaelo ea hore na jeke ea 3.5mm e ea hokae.

HO KENYA AXDIS-GMLN31

Ha senotlolo se le sieo:

Hokela likhoele tse 16 le likhoele tse hlobotsoeng, le likhoele tsa AXDIS-GMLN31, ho sehokelo.

Ela hloko! Se ke oa hokela likhoele tsa AXDIS-GMLN31 le likhoele tsa likhoele ka koloing hajoale.
Ela hloko! Haeba o ts'oara litaolo tsa lebili, etsa bonnete ba hore jack/terata e hoketsoe seea-le-moeeng pele o tsoela pele. Haeba mohato ona o ka tloloa, sebopeho se tla hloka ho hlophisoa bocha hore litsamaiso tsa lebili la setereng li sebetse.

HO HLAHALA AXDIS-GMLN31

Bakeng sa mehato e ka tlase, LED e teng ka har'a sebopeho se ka bonoa feela ha e ntse e sebetsa. Sehokelo ha se hloke ho buloa ho bona LED

Qala koloi.
Hokela thapo ea AXIS-GMLN31 ho likhoele tsa likhoele ka koloing.

LED e tla qala ho bulela botala bo tiileng, ebe e tima metsotsoana e seng mekae ha e ntse e lemoha radio e kentsoeng.
Joale LED e tla khantša Bofubelu ho fihlela ho (18) makhetlo a bontšang hore na seea-le-moea se hokahane le sebopeho, ebe se tima metsotsoana e 'maloa. Ela hloko haholo hore na ke ba bakae Khubedu mabone a teng. Sena se tla thusa ho rarolla mathata haeba ho hlokahala. Sheba karolo ea maikutlo a LED bakeng sa lintlha tse ling.
Kamora metsotsoana e seng mekae, LED e tla bulela Red e tiileng ha sehokelo sa auto se bona koloi. Hona joale seea-le-moea se tla tima. Ts'ebetso ena e lokela ho nka metsotsoana e 5 ho isa ho e 30.

Hang ha koloi e se e lemohile ka sebopeho sa sebopeho, LED e tla bulela e tiileng botala, mme seea-le-moea se tla khutla, ho bontša hore mananeo a atlehile.
Lekola mesebetsi eohle ea ts'ebetso bakeng sa ts'ebetso e nepahetseng, pele o kopanya dash hape. Haeba sebopeho se hloleha ho sebetsa, sheba ho Resetting the AXDIS-GMLN31.
Hlokomela: LED e tla bulela e tiileng Botala nakoana, ebe oa tima tlas'a ts'ebetso e tloaelehileng ka mor'a hore senotlolo se potolohe.

LIEKETSENG TSA TAOLO TSA LEBITANE

Tlhaloso ea LED
Mahlaseli a (18) a khubelu a LED a emela seo seea-le-moea sa brand AXDIS-GMLN31 e lumelang hore se hokahane le sona. Flash ka 'ngoe e emetse moetsi oa seea-le-moea o fapaneng. Bakeng sa mohlalaample, haeba u kenya seea-le-moea sa JVC, AXDIS-GMLN31 e tla khanya (5) linako tse ling. Se latelang ke tšōmo e laelang hore na ke moetsi ofe ea lumellanang le flash.

Pale ea maikutlo ea LED

1 flash - Eclipse (Mofuta oa 1) †	Mabone a 10 - Clarion (Mofuta oa 2) †
2 tse phatsimang - Kenwood ‡	11 flashes - Metra OE
Mabone a 3 - Clarion (Mofuta oa 1) †	Mahlaseli a 12 - Eclipse (Mofuta oa 2) †
4 flashes - Sony / Dual	13 flashes - LG
5 e benya - JVC	14 flashes - Parrot **
6 flashes - Pula-maliboho / Jensen	15 flashes - XITE
Mabone a 7 - Alpine *	16 flashes - Philips
Likarolo tse 8 - Visteon	17 flashes - TBD
9 e phatsima - Valor	18 flashes - JBL

* Tlhokomeliso: Haeba AXDIS-GMLN31 e benya ka makhetlo a Bofubelu (7), 'me ha u na seea-le-moea sa Alpine se hokahaneng le eona, ho bolela hore AXDIS-GMLN31 ha e bone seea-le-moea se hokahaneng le eona. Netefatsa hore jeke ea 3.5mm e hokahane le jack/terata e nepahetseng ea setereng seea-le-moeeng.
** Hlokomela: Ho hlokahala nomoro ea karolo ea AXSWCH-PAR (e rekisoa ka thoko). Hape, seea-le-moea sa Parrot se tlameha ho nchafatsoa ho rev. 2.1.4 kapa ho feta ka www.parrot.com.
† Tlhokomeliso: Haeba u na le seea-le-moea sa Clarion 'me li-control tsa lebili la setereng li sa sebetse, fetola mofuta oa seea-le-moea ho ea ho mofuta o mong oa seea-le-moea sa Clarion; joalo ka Eclipse. Karolo e latelang e hlalosa mokhoa oa ho etsa sena.
‡ Tlhokomeliso: Haeba u na le seea-le-moea sa Kenwood 'me maikutlo a LED a khutla joalo ka seea-le-moea sa JVC, fetola mofuta oa seea-le-moea hore e be oa Kenwood. Karolo e latelang e hlalosa mokhoa oa ho etsa sena.

Tlhokomeliso: Axxess Updater App e ka boela ea sebelisoa ho hlophisa likaroloana tse latelang (3) hape, ha ho ntse ho emetse hore sebopeho se se se qalile le ho hlophisoa.

Ho fetola mofuta oa radio
Haeba mabone a LED a sa tsamaisane le seea-le-moea seo o se hokileng, o tlameha ho iketsetsa AXDIS-GMLN31 ho se bolella hore na se hoketsoe ka seea-le-moea sefe.

Kamora metsotsoana (3) ea ho bulela senotlolo, tobetsa 'me u tšoare konopo ea Volume-Down lebiling la setereng ho fihlela LED e ho AXDIS-GMLN31 e tiea.
Lokolla konopo ea Volume-Down; LED e tla tima e bontšang hore joale re Fetohang
Mofuta oa seea-le-moea.

Sheba Radio Legend ho tseba hore na u ka rata ho hlophisoa nomoro efe ea seea-le-moea.
Tobetsa 'me u tšoare konopo ea Volume-Up ho fihlela LED e tiea, ebe e lokolla. Pheta mohato ona bakeng sa nomoro ea seea-le-moea eo u e khethileng.
Hang ha nomoro ea seea-le-moea e lakatsehang e se e khethiloe, tobetsa 'me u tšoare konopo ea Volume-Down lebiling la setereng ho fihlela LED e tiea. LED e tla lula e butse metsotsoana e ka bang (3) ha e ntse e boloka litaba tse ncha tsa seea-le-moea.

Hang ha LED e tima, mokhoa oa ho fetola mofuta oa seea-le-moea o tla fela. Hona joale o ka lekola litaolo tsa mabili a taolo.

Hlokomela: Haeba ka nako efe kapa efe mosebelisi a hloleha ho tobetsa konopo efe kapa efe nako e telele ho feta metsotsoana e 10, ts'ebetso ena e tla emisa.

LIPEHAKANISO TSA TAOLO YA LEbidi la Sterering (TSOA)

Setsi sa seea-le-moea

1. Eclipse (Mofuta oa 1)
2. Kenwood
3. Clarion (Mofuta oa 1)
4. Sony / Dual
5. JVC
6. Pula-maliboho/Jensen

7. Alpine
8. Visteon
9. Sebete
10. Clarion (Mofuta oa 2)
11. Metra OE
12. Eclipse (Mofuta oa 2)

13. LG
14. Papali
15. XITE
16. Philips
17. TBD
18. JBL

Ho fetola li-button tsa taolo ea lebili

Ha re re u na le AXDIS-GMLN31 e qalileng 'me u batla ho fetola kabelo ea konopo bakeng sa likonopo tsa taolo ea lebili. Bakeng sa mohlalaample, o ka rata ho Batla ho fetoha Semumu. Latela mehato e ka tlase ho etsa 'mapa oa likonopo tsa taolo ea lebili la setere:

Netefatsa hore AXDIS-GMLN31 ea bonahala e le hore u ka bona mabone a LED ho netefatsa ho amoheloa ha konopo.
Keletso: Ho kgothaletswa ho tima radio.

Nakong ea metsotsoana e mashome a mabeli a pele a ho khantša, tobetsa 'me u tšoare konopo ea Volume-Up lebiling la ho khanna ho fihlela LED e tiea.
Lokolla konopo ea Volume-Up, LED e tla tsoa; Hona joale konopo ea Volume-Up e se e entsoe.
latela lenane le ho Konopo Assignment Legend ho supa tatellano eo likonopo tsa taolo ea lebili le lokelang ho hlophisoa ka tsona.
Hlokomela: Haeba tšebetso e latelang lethathamong le le sieo lebiling la setere, tobetsa konopo ea Volume-Up bakeng sa (1) motsotsoana ho fihlela LED e hlaha, ebe o lokolla konopo ea Volume-Up. Sena se tla bolella AXDIS-GMLN31 hore ts'ebetso ena ha e fumanehe mme e tla fetela tšebetsong e latelang.

Ho phethela ts'ebetso ea ho etsa 'mapa, tobetsa le ho tšoara konopo ea Volume-Up lebiling la setereng ho fihlela LED e ho AXDIS-GMLN31 e tima.

Tšōmo ea mosebetsi oa konopo

1. Phahamiso ea Molumo
2. Molumo-theoha
3. Batla-Up/E latelang
4. Batla-Down/Prev
5. Mohloli/Mokhoa
6. Semumu
7. Preset-up
8. Preset-Down
9. Matla

10. Letlapa
11. Bapala/Kena
12. PTT (Push to Talk) *
13. On-Hook *
14. Off-Hook *
15. Phatlalatso *
16. Fane-Fatše *
17. Temp-up*
18. Temp-down *

* Ha e sebetse ts'ebelisong ena

Ela hloko: Ha se liea-le-moea tse tla ba le litaelo tsena kaofela. Ka kopo, sheba bukana e fanoeng le seea-le-moea, kapa ikopanye le moetsi oa seea-le-moea bakeng sa litaelo tse khethehileng tse amoheloang ke seea-le-moea seo.

Litaelo tsa mesebetsi e 'meli (tobetsa konopo e telele)
AXIS-GMLN31 e na le bokhoni ba ho abela (2) mesebetsi konopo e le 'ngoe, ntle le VolumeUp le Volume-Down. Latela mehato
ka tlase ho hlophisa likonopo (li) ho rata ha hao.
Tlhokomeliso: Seka-Up le Seek-Down e tla e hlophisitsoeng esale pele e le Preset-Up le Preset-Down bakeng sa ho tobetsa konopo e telele.

Bulela mollo empa u se ke ua qala koloi.

Tobetsa 'me u hatelle konopo ea taolo ea lebili leo u batlang ho fana ka mosebetsi oa ho tobetsa nako e telele ka metsotsoana e ka bang (10), kapa ho fihlela LED e benya ka potlako. Ka nako ena lokolla konopo; LED e tla lula e tiile.
Tobetsa le ho lokolla konopo ea Volume-Up palo ea linako tse tsamaellanang le nomoro e ncha ea konopo e khethiloeng. Sheba Leano la Likabelo tse peli. LED e tla khanya ka potlako ha konopo ea Volume-Up e ntse e hatelloa, ebe e khutlela ho LED e tiileng hang ha e lokolloa. E-ea mohatong o latelang hang ha konopo ea Volume-Up e se e tobetse makhetlo ao u a batlang. Tlhokomeliso: Haeba metsotsoana e fetang (10) e feta pakeng tsa ho tobetsa konopo ea Volume-Up, mokhoa ona o tla khaotsa, 'me LED e tla tima.
Ho boloka konopo e telele ea ho tobetsa mohopolong, tobetsa konopo eo u e fileng konopo e telele ea ho tobetsa (konopo e ts'oereng Mohato oa 2). LED joale e tla tima e bonts'a hore tlhahisoleseling e ncha e bolokiloe.
Hlokomela: Mehato ena e tlameha ho phetoa bakeng sa konopo e 'ngoe le e' ngoe eo u ka ratang ho e abela karolo ea merero e 'meli. Ho seta konopo ho khutlela boemong ba eona ba kamehla, pheta Mohato oa 1, ebe o tobetsa konopo ea Volume-Down. LED e tla tima, 'me 'mapa o molelele oa khatiso oa konopo eo o tla hlakoloa.

Tšōmo ea likabelo tse peli

1. Ha ea lumelloa
2. Ha ea lumelloa
3. Batla-Up/E latelang
4. Batla-Down/Prev
5. Mokhoa / Mohloli

6. ATT/Mute
7. Preset-up
8. Preset-Down
9. Matla
10. Letlapa

11. Bapala/Kena
PTT
13. Ho-Hook
14. Off-Hook

15. Phatlalatso *
16. Fane-Fatše *
17. Temp-up*
18. Temp-down *

HO BATLE PHOSO

Ho tsosolosa mokhoa oa AXDIS-GMLN31

Konopo ea Blue reset e fumaneha ka har'a sehokelo, lipakeng tsa lihokelo tse peli. Konopo e fumaneha ka ntle ho sebopeho, ha ho hlokahale ho bula sebopeho.

Tobetsa 'me u tšoare konopo ea reset bakeng sa metsotsoana e' meli, ebe u e tlohela ho ea ho seta sebopeho.
Sheba "Programming Interface" ho tloha ntlheng ena.

O na le mathata? Re mona ho thusa.
Ikopanye le mohala oa rona oa Tech Support ho:
386-257-1187
Kapa ka lengolo-tsoibila ho:
techsupport@metra-autosound.com

Lihora tsa Tšehetso ea Tech (Nako e Tloaelehileng ea Bochabela)
Mantaha - Labohlano: 9:00 AM - 7:00 PM
Moqebelo: 10:00 AM - 7:00 PM
Sontaha: 10:00 AM - 4:00 PM

TSEBO MATLA
Ntlafatsa tsebo ea hau ea ho kenya le ho etsa mahlale ka ho ingolisa sekolong sa elektroniki se tsebahalang le se hlomphuoang ka ho fetesisa indastering ea rona.
Kena ho www.installerinstitute.com kapa letsa 800-354-6782 bakeng sa tlhaiso-leseling e batsi mme o nke mehato e lebisang bokamosong bo betere.