UI
MOTSAMAI
Modal Argon8M ke 8 voice polyphonic wavetable synthesizer. E na le li-wavetable tse 120 tse entsoeng ka matsoho tse arotsoeng ka libanka tse 24 tsa li-waveform tse 5 tse feto-fetohang, li-oscillator tse 32 ka kakaretso (4 ka lentsoe), le mefuta e mengata ea li-wavetable le oscillator modifiers.
Ka ntle ho li-oscillator, ho na le filthara ea mefuta e mengata, lijenereithara tsa enfelopo tse 3, li-LFO tse 2 tsa molumo, lienjineri tse 3 tse ikemetseng le tse lokisehang tsa stereo FX, sequencer ea nako ea nnete, arpeggiator e hlophisitsoeng, le matrix a mangata a modulation.
Li-encoder tse peli tse fetotsoeng ka mahlakoreng a mabeli a skrine li sebelisetsoa ho tsamaisa le ho laola skrineng:
Leqephe/Param – Ha encoder ena e le ho 'Leqephe' e potoloha maqepheng a paramethara (mohlala, Osc1, Osc2, Filter); ha e le ka har'a "Param" e potoloha liparamente tse leqepheng leo. Sebelisa switch ho chencha lipakeng tsa mekhoa e 'meli, mohlala o hlahisoa skrineng ka mola hodimo bakeng sa 'Page' mode 'me ka tlase bakeng sa' Param 'mode.
Seta esale pele / Fetola / Banka - Kh'outu / sesebelisoa sena se sebelisetsoa ho fetola boleng kapa ho 'hlasimolla' parameter e bonts'itsoeng hajoale. Ha o le mochining oa 'Load Patch' ha phanele e le ka 'Shift' mokhoa ona oa encoder o sebelisetsoa ho khetha nomoro ea banka ea patch.
Lihokelo
Li-headphone - 1/4 "socket ea jack ea stereo
Ka ho le letona - Audio Out bakeng sa kanale e nepahetseng ea stereo. 1/4 ”sekoti sa jack sa TS se sa leka-lekanang
Ka ho le letšehali / Mono - Audio Out bakeng sa mocha o letšehali oa stereo. Haeba ha ho na thapo e kentsoeng ka har'a sokete e nepahetseng, etsa kakaretso
ho Mono. 1/4" TS jack socket e sa leka-lekanang
Pontšo - kenyelletso e sebelisoang ke mosebelisi, 1/4 "sokete ea jack ea TRS
Sustain - e sebetsa ka 'mala ofe kapa ofe o tloaelehileng, o bulehileng oa motsotsoana, 1/4 "socket sok
Audio In - audio input, ho sebetsana le mohloli oa hau oa molumo ka lienjine tsa Argon FX, soketi ea jack ea 3.5mm TRS
Mesebetsi ea Shift - meeli ea 'mala o moputsoa o ka fumaneha ka ho kenya' Shift 'mode o sebelisa konopo e ka letsohong le letona la skrineng ka lesale le leputsoa. Phetoho e ka ba ea motsotsoana ka ho ts'oara konopo le ho fetola parameter kapa ho koaloa ka ho tobetsa konopo ea shift.
Mesebetsi ea Alt - litekanyo tse bohlooho bo khanyang li ka fumanoa ka ho tšoara konopo e nang le selikalikoe sa bohlooho bo khanyang karolong e le 'ngoe (Velo). Mokhoa oa 'Alt' o lula o le oa nakoana mme o tla tsoa ka mokhoa oa 'Alt' ha ho lokolloa konopo.
Li-Presets
Patch/Seq - konopo ena e sebelisoa haholo ho chencha skrineng hore e be param ea 'Load Patch' kapa 'Load Seq' bakeng sa ho kenya lipache kapa tatellano, leha ho le joalo, konopo ena e boetse e kenya phanele hore e be 'Patch' kapa 'Seq'. mokgoa. Sena se fetola likonopo tsa 'Save' le 'Init' hore li ame tsamaiso ea Patch preset ka mokhoa oa 'Patch' kapa tsamaiso ea Sequencer preset ka mokhoa oa 'Seq'.
'Init / Rand' - konopo ena e sebetsa feela ha e ts'oaroe.
Argon8M e ka ba le mefuta e mengata e matla kahoo ho na le taolo ea Patch Gain e ka sebelisoang ho lekanya palo ea li-patch. Tšoara konopo ea 'Patch' 'me u fetole encoder ea' Volume 'ho laola paramethara ea 'Patch Gain'.
Sync In - analog clock in. 3.3v, bohale bo ntseng bo phahama, pulse 1 ka lets'oao la noto ea 16th, 3.5mm TS jack socket
Sync Out - oache ea analoge e tsoa ka mokhoa o ts'oanang le oache, soketeng ea jack ea 3.5mm
MIDI Out - e sebelisetsoa ho laola lisebelisoa tse ling tsa MIDI, socket ea 5-pin DIN MIDI
MIDI In - e ne e sebelisoa ho laoloa ho tsoa ho lisebelisoa tse ling tsa MIDI, socket ea 5-pin DIN MIDI
USB MIDI - MIDI ho / ho tsoa ho moamoheli oa USB MIDI, hokela Argon8M ho laptop / tablet / sesebelisoa sa mohala bakeng sa
mohlophisi oa software ea boikhethelo, ModalApp, sokete ea USB-B e boholo bo felletseng
Matla - 9.0V, 1.5A, phepelo ea motlakase ea li-barrel e bohareng
Ho boloka esale pele
Tobetsa konopo ea 'Boloka' ho kenya ts'ebetso e felletseng ea ho boloka kapa ho ts'oara konopo ea 'Boloka' ho etsa 'pholosa ka potlako (ho boloka setlhophiso se seng se le teng sebakeng sa hajoale se nang le lebitso la hajoale).
Ha u se u ntse u le teng ka botlalo, li-presets li bolokiloe ka tsela e latelang:
Khetho ea sebaka - Sebelisa "Edita" encoder ho khetha banka/nomoro eo u ka e bolokang, ebe o tobetsa konopo ea 'Edita' ho e khetha.
Ho reha lebitso - Sebelisa encoder ea 'Leqephe / Param' ho khetha boemo ba semelo mme u sebelise encoder ea 'Edita' ho khetha sebapali. Tobetsa konopo ea 'Edita' ho qeta ho hlophisa lebitso.
Ho na le liqeto tsa liphanele tse 'maloa mona:
Tobetsa 'Velo' ho tlolela ho litlhaku tse nyane
Tobetsa 'AftT' ho tlolela ho litlhaku tse kholo
Tobetsa 'Hlokomela' ho tlolela linomorong
Tobetsa 'Expr' ho tlolela matšoao
Tobetsa konopo ea 'Leqephe / Param' ho eketsa sebaka (ho eketsa litlhaku tsohle tse kaholimo)
Tobetsa 'Init' ho hlakola sebopeho sa hajoale (fokotsa litlhaku tsohle tse kaholimo)
Tšoara 'Init' ho hlakola lebitso kaofela
Tobetsa konopo ea 'Edita' ho netefatsa li-setting ebe u boloka tse seng li setiloe.
Nako efe kapa efe nakong ea ts'ebetso ts'oara switch ea 'Leqephe / Param' ho khutlela morao mohato.
Ho tsoa / ho tlohela ts'ebetso ntle le ho boloka lintho tse seng li setiloe, tobetsa konopo ea 'Patch / Seq'.
Litlhophiso tsa Global
Ha skrine se bontša khetho ea 'Reset', tšoara konopo ea 'Edita' ho qala ts'ebetso ea 'Reset'.
Ho Hopola ka Potlako
Argon8M e na le 4 Quick Recall slots bakeng sa ho kenya lipache kapele. Likhopotso tse Potlakileng li laoloa ho sebelisoa likonopo tse latelang:
Tšoara 'Patch' + tšoara e 'ngoe ea likonopo tse' ne ka tlase ho le letšehali la phanele ho abela sekhechana se laetsoeng hajoale ho sekotjana sa QR
Tšoara 'Patch' + tobetsa e 'ngoe ea likonopo tse' nè ka tlase ho le letšehali la phanele ho kenya patch sebakeng sa QR
Li-oscillators
Tšoara konopo ea 'Patch' 'me u fetole' Wave1 'kapa' Wave2 'ho laola likarolo tsa WavMod
Tobetsa konopo ea 'Tune / Fine' ho fapoha lipakeng tsa taolo ea Osc1 le Osc2 le taolo e nepahetseng
Sefe
Tšoara konopo ea 'Patch' 'me u bulele encoder ea' Cutoff 'ho laola mofuta oa Filter Type
Lienfelopo
Tšoara leha e le efe ea li-switch tsa EG motsotsoana o le mong ebe o fetola li-encoder tsa ADSR ho fetola lienfelopo tsohle ka nako e le 'ngoe.
Tobetsa konopo ea 'MEG' ha MEG e se e khethiloe ho latch MEG assign
Sequencer
Tšoara likonopo tsa 'Patch' le 'Play' ho hlakola lintlha tsa sequencer Ha skrini se hlahisa paramethara ea 'Linked Sequence', tšoara konopo ea 'Edita' ho seta boleng hore e be tatellano e kentsoeng hajoale.
Arp
Tšoara konopo ea 'Arp' ebe u tobetsa linotlolo ho keyboard e kantle ho kenya lintlha tsa paterone kapa u tobetse konopo ea 'Play' ho eketsa phomolo ho paterone.
Tšoara konopo ea 'Patch' 'me u fetole encoder ea' Division 'ho laola Arp Gate
Keyboard / Lentswe
Tobetsa 'Mode' khafetsa ho potoloha ka mekhoa e fapaneng ea lentsoe Mono, Poly, Unison (2,4 le 8), le Stack (2 le 4).
Tobetsa 'Chord' ha u ntse u tšoere sekonopo lebokoseng le kantle ho seta chord mode chord.
Ho feto-fetoha ha molumo oa lentsoe
Ho abela Mod Slot ho ts'oara (ea nakoana) kapa ho hokela konopo ea "Mod source" eo u e batlang - ebe u beha botebo ka ho fetola paramethara ea sebaka seo u batlang ho ea ho sona.
Ha o koaletsoe ka har'a Mohloli oa Mod Mod mme o tobetsa konopo ea Mod Source e phatsimang hape o tla tsoa mokhoeng oa ho abela
Mod key source + 'Depth' encoder - seta botebo ba lefats'e bakeng sa mohloli oo oa mod
Tobetsa ModSlot khafetsa ho potoloha le view litlhophiso tsohle tsa mod slot skrineng
Ha skrineng se bonts'a mod slot 'Depth' parameter (e fumanehang habonolo ka ho fana ka modulation ka phanele kapa ka konopo ea ModSlot), tšoara konopo ea 'Edita' ho hlakola kabelo ea mod slot.
Ho fana ka mohloli oa mod ho sebaka seo orc e fihlelang ho sona khafetsa lefatšeng ka bophara, sebelisa e 'ngoe ea li-control tsa tune hantle. 'Tune1' e tla abela pina ea Osc1, 'Tune2' e tla abela pina ea Osc2.
FX
Tobetsa FX1 / FX2 / FX3 switjha khafetsa ho fetola mofuta oa FX oa slot
Tšoara FX1 / FX2 / FX3 switch ho seta mofuta oa FX oa slot ho 'Ha ho letho'
Fetolela encoder ea 'B' molemong o fosahetseng oa slot ka Delay FX e abetsoeng ho fihlela linako tse lumellanang tsa ho lieha
Tobetsa FX1 + FX2 + FX3 ho tlolela ho parameter ea 'FX Preset Load'
LFO
Fetolela likhouto tsa 'Rate' hore e be mefuta e meng e fosahetseng ho fumana litefiso tse lumellanang
Tobetsa konopo ea 'LFO1 / LFO2' ha LFO e se e khethiloe ho kenya LFO
Litokomane / Lisebelisoa
 |
ARGON 8 Voice Wavetable Synthesizer Module [pdf] Bukana ea Mosebelisi 8 Module ea Synthesizer ea Voice Wavetable |
