UI
NDỤMỌDỤ
Modal Argon8M bụ 8 olu polyphonic na-efegharị efegharị synthesizer. Ọ na-egosipụta ebili mmiri 120 arụpụtara na-ekewa n'ime ụlọ akụ 24 nke 5 morphable waveform sets, 32 oscillators na mkpokọta (4 kwa olu), yana nnukwu ụdị ntụgharị na oscillator modifiers.
Na agafe oscillators, enwere nzacha ọtụtụ ụdị, ndị na-emepụta envelopu 3, LFOs audio-2, igwe stereo FX 3 siri ike na-ahazi na onye ọrụ, onye na-eme ihe n'ezie, arpeggiator programmable, yana nnukwu matrix modulation.
A na-eji ihe ngbanwe abụọ gbanwere n'akụkụ ọ bụla nke ihuenyo ahụ maka igodo na njikwa ihuenyo:
Ibe/Param – Mgbe koodu a dị na 'Page' mode ọ na-agbagharị site na ibe oke (dịka Osc1, Osc2, Filter); mgbe ọ dị na 'Param' mode ọ na-agagharị na paramita dị na ibe ahụ. Jiri mgba ọkụ ka ịgbanwee n'etiti ụdịdị abụọ ahụ, a na-egosipụta ihe nlereanya ahụ na ihuenyo yana akara dị n'elu maka ọnọdụ 'Page' na ala maka ọnọdụ 'Param'.
Preset/Dezie/Bak - A na-eji ihe ngbanwe/mgbanwe a iji dozie uru ma ọ bụ 'kpalite' oke egosiri ugbu a. Mgbe ị nọ na paramita 'Load Patch' mgbe panel ahụ nọ na ọnọdụ 'Shift', a na-eji koodu a họrọ nọmba ụlọ akụ patch.
Njikọ
Igwe ekweisi - 1/4" oghere jakị stereo
Right – Audio Out maka ọwa stereo ziri ezi. 1/4 ″ soket jakị TS enweghị nha nha
Aka ekpe/Mono – Ọnụ ụda maka ọwa stereo aka ekpe. Ọ bụrụ na enweghị eriri etinyere na oghere Right wee nchikota
ka Mono. 1/4 ″ soket jakị TS enweghị nha nha
Nkwuputa – ntinye pedal nwere ike ịhazi onye ọrụ, oghere jakị TRS 1/4
Nkwagide – na-arụ ọrụ na ọkọlọtọ ọ bụla, oghere oghere obere oge, oghere jakị 1/4 ″ TS
Ntinye ọdịyo stereo, iji jikwa igwe Argon FX, oghere TRS 3.5mm iji hazie isi iyi ọdịyo gị.
Ọrụ Shift - enwere ike ịnweta paramita na-acha anụnụ anụnụ site na ịbanye 'Shift' mode site na iji bọtịnụ dị n'aka nri nke ihuenyo nwere mgbanaka na-acha anụnụ anụnụ. Mgbanwe ahụ nwere ike ịdị nwa oge site na ijide bọtịnụ na ịgbanwe paramita ma ọ bụ tinye ya site na ịpị bọtịnụ mgbanwe.
Ọrụ Alt - enwere ike ịnweta paramita na isi awọ ọkụ site na ijide bọtịnụ na mgbanaka isi awọ n'otu akụkụ (Velo). 'Alt' mode na-adịru nwa oge na ị ga-apụ 'Alt' mode na ntọhapụ nke bọtịnụ.
Ntọala
Patch / Seq - a na-ejikarị bọtịnụ a iji gbanwee ihuenyo ka ọ bụrụ 'Load Patch' ma ọ bụ 'Load Seq' param maka nbudata patches ma ọ bụ usoro, Otú ọ dị, bọtịnụ a na-etinyekwa panel n'ime 'Patch' mode ma ọ bụ 'Seq'. ọnọdụ. Nke a na-agbanwe bọtịnụ 'Chekwa' na 'Init' ka ọ ga-emetụta njikwa preset Patch na 'Patch' mode ma ọ bụ njikwa preset Sequencer na 'Seq' mode.
'Init / Rand' - bọtịnụ / ọrụ a na-aza naanị na njide bọtịnụ.
Argon8M nwere ike ịnwe oke ike dị egwu, yabụ enwere njikwa Patch Gain nke enwere ike iji hazie mpịakọta patch. Jide bọtịnụ 'Patch' wee tụgharịa 'Volume' koodu iji jikwaa oke 'Patch Gain'.
Mmekọrịta Na - elekere analog n'ime. 3.3v, ọnụ na-arị elu, pulse 1 kwa akara ndetu iri na isii, oghere jakị 16mm TS
Sync Out – Analọgụ elekere pụọ, otu nhazi ahụ dị ka elekere na, oghere jakị 3.5mm TS
MIDI Out - eji ejikwa ngwaike MIDI ndị ọzọ, oghere DIN MIDI 5-pin
A na-ejikwa MIDI In - site na ngwaike MIDI ndị ọzọ, oghere DIN MIDI 5-pin
USB MIDI – MIDI n'ime/apụta na onye ọbịa USB MIDI, jikọọ Argon8M na laptọọpụ / mbadamba / ngwaọrụ mkpanaka maka
onye nchịkọta ngwanrọ nhọrọ, ModalApp, oghere USB-B zuru oke
Ike – 9.0V, 1.5A, etiti-mma barrel ike ọkọnọ
Ntọala atọrọ atọ
Pịa bọtịnụ 'Chekwa' ka ịbanye usoro nchekwa 'zuru' ma ọ bụ jide bọtịnụ 'Chekwa' iji mee 'nchekwa ngwa ngwa (na-echekwa ntọala n'ime oghere dị ugbu a nwere aha ugbu a).
Ozugbo ị banyere n'usoro nchekwa 'zuru oke', a na-echekwa ntọala n'ụzọ ndị a:
Nhọrọ oghere - Jiri koodu 'Dezie' họrọ ụlọ akụ/nọmba preset ka ị chekwaa n'ime, wee pịa mgbanwe 'Dezie' ka ịhọrọ ya.
Ịkpọ aha – Jiri akara 'Page/Param' ka ịhọrọ ọnọdụ agwa wee jiri 'Dezie' koodu iji họrọ agwa. Pịa mgbanwe 'Dezie' ka ịmechaa edezi aha.
Enwere ọtụtụ ụzọ mkpirisi panel ebe a:
Pịa 'Velo' ka ima elu na mkpụrụedemede obere
Pịa 'AftT' ka ima elu na mkpụrụedemede ukwu
Pịa 'Note' ka ịwụba na ọnụọgụgụ
Pịa 'Expr' ka ima elu na akara
Pịa mgba ọkụ 'Page/Param' ka ịgbakwunye oghere (mgbakwunye mkpụrụedemede niile dị n'elu)
Pịa 'Init' ka ihichapụ mkpụrụedemede dị ugbu a (welata mkpụrụedemede niile dị n'elu)
Jide 'Init' ka ihichapụ aha niile
Pịa mgba ọkụ 'Dezie' iji kwado ntọala wee chekwaa ntọala ahụ.
N'oge ọ bụla n'oge usoro, jide 'Page/Param' ịgbanwee laghachi azụ nzọụkwụ.
Ka ịpụọ/ kwụsị usoro ahụ na-echekwaghị ntọala, pịa bọtịnụ 'Patch/Seq'.
Ntọala zuru ụwa ọnụ
Mgbe ihuenyo na-egosipụta nhọrọ 'Tọgharia', jide 'Dezie' mgbanwe iji kpalite 'Tọgharia' ọrụ.
Ncheta ngwa ngwa
Argon8M nwere oghere ncheta ngwa ngwa 4 maka itinye patches ngwa ngwa. A na-achịkwa ncheta ngwa ngwa site na iji bọtịnụ ndị a:
Jide 'Patch' + jide otu n'ime bọtịnụ anọ dị na ala aka ekpe nke panel iji kenye patch a na-ebu ugbu a na oghere QR.
Jide 'Patch' + pịa otu n'ime bọtịnụ anọ dị na ala aka ekpe nke panel iji buo patch ahụ na oghere QR.
Oscillators
Jide bọtịnụ 'Patch' wee tụgharịa 'Wave1' ma ọ bụ 'Wave2' koodu iji jikwaa paramita WavMod.
Pịa ngbanwe 'Tune/Fine' ka ịgbanwee n'etiti ụda Osc1 na Osc2 na njikwa mma.
Iyo
Jide bọtịnụ 'Patch' wee tụgharịa 'Cutoff' koodu iji jikwaa paramita Ụdị Filter
Envelopu
Jide ihe ọ bụla n'ime EG switches maka otu sekọnd wee tụgharịa ADSR koodu iji dozie envelopu niile n'otu oge.
Pịa mgba ọkụ 'MEG' mgbe ahọpụtara MEG ka ọ kwụsị ọrụ MEG
Ndozi
Jide bọtịnụ 'Patch' na 'Play' ka ihichapụ ndetu usoro ihe mgbe ihuenyo na-egosipụta paramita 'Linked Sequence', jide ngbanwe 'Dezie' ka ịtọ uru ka ọ bụrụ usoro ebugoro ugbu a.
Arp
Jide 'Arp' mgba ọkụ wee pịa igodo dị na ahụigodo mpụga ka ịgbakwunye ndetu ụkpụrụ ma ọ bụ pịa bọtịnụ 'Play' ka ịgbakwunye izu ike na ụkpụrụ.
Jide bọtịnụ 'Patch' wee tụgharịa 'Nkewa' koodu iji jikwaa ọnụ ụzọ Arp
Ahụigodo/olu
Pịa 'Ụdị' ugboro ugboro ka ị gagharịa site na ụdị olu dị iche iche Mono, Poly, Unison (2,4 na 8), na Stack (2 na 4).
Pịa 'Chord' ka ị na-ejide ụdọ na ahụigodo mpụga ka ịtọọ usoro ụdọ.
Mgbanwe
Iji kenye Mod Slot ma jide (obere oge) ma ọ bụ kpachie bọtịnụ isi mmalite Mod achọrọ - wee tọọ omimi site na ịtụgharị ebe njedebe mgbanwe mgbanwe achọrọ.
Mgbe etinyere ya na ọnọdụ ekenye Mod Source, ịpị bọtịnụ Iyi Mod na-egbuke egbuke ọzọ ga-apụ na ọnọdụ ọrụ
Bọtịnụ iyi iyi + 'Omimi' koodu – tọọ omimi zuru ụwa ọnụ maka isi iyi mod ahụ
Pịa ModSlot ugboro ugboro ka ị gafere na view niile mod oghere ntọala na ihuenyo
Mgbe ihuenyo na-egosipụta paramita 'Omimi' mod (nke a na-enweta nke ọma site na ịnye modulation site na iji panel ma ọ bụ site na bọtịnụ ModSlot), jide 'Dezie' iji kpochapụ ọrụ oghere mod.
Iji kenye mod isi iyi na ebe orc zuru ụwa ọnụ ugboro ugboro, jiri nke ọ bụla n'ime njikwa ụda ọma. 'Tune1' ga-ekenye na egwu Osc1, 'Tune2' ga-ekenye na ụda Osc2.
FX
Pịa FX1 / FX2 / FX3 ịgbanwee ugboro ugboro iji gbanwee ụdị FX nke oghere
Jide mgbanwe FX1 / FX2 / FX3 iji tọgharịa ụdị FX nke oghere ka ọ bụrụ 'Ọ dịghị'
Tụgharịa koodu 'B' ka ọ bụrụ ebe na-adịghị mma maka oghere nwere igbu oge FX ekenyere iji nweta oge igbu oge synced.
Pịa FX1 + FX2 + FX3 ka ima elu na oke 'FX Preset Load'
LFO
Tụgharịa koodu 'ọnụego' ka ọ bụrụ ebe adịghị mma iji nweta ọnụego emekọrịtara
Pịa mgba ọkụ 'LFO1/LFO2' mgbe ahọpụtara LFO ka ọ kwụsị ọrụ LFO
Akwụkwọ / akụrụngwa
 |
ARGON 8 Module Synthesizer na-efegharị olu [pdf] Ntuziaka onye ọrụ 8 Modul Synthesizer nke na-efegharị olu |
