Tlhaloso: AOC E2770SD LCD Monitor

Litlhaloso

• Nomoro ea Mohlala: E2770SD, E2770SD6, E2770SHE, E2770PQU, E2770SH, Q2770PQU, G2770PQU, G2770PF, M2770V, M2870V, M2870VHE, M2870VQ, I2770VHE, I2770VHE
• Lebone le ka morao: LED

Litaelo tsa Tšebeliso ea Sehlahisoa

Matla

Monitor e lokela ho sebetsoa feela ho tsoa mofuteng oa mohloli oa matla o bontšitsoeng leiboleng. Haeba o sa tiisehe ka mofuta oa motlakase o fanoang lapeng la hau, ikopanye le morekisi oa hau kapa k'hamphani ea motlakase ea lehae.

Sesebelisoa se na le polaka e mehatla e meraro, polaka e nang le phini ea boraro (ea motheo). Plaka ena e tla kenella feela ka har'a motlakase o theiloeng fatše e le karolo ea polokeho. Haeba outlet ea hau e sa kenele polaka ea lithapo tse tharo, kopa setsebi sa motlakase hore se kenye sephetho se nepahetseng, kapa sebelisa adaptara ho sila sesebelisoa ka mokhoa o sireletsehileng. Se ke oa hlola sepheo sa polokeho ea polaka e theiloeng fatše.

Tlosa yuniti nakong ea sefefo sa lehalima kapa ha e ke ke ea sebelisoa nako e telele. Sena se tla sireletsa leihlo ho senya ka lebaka la ho phahama ha matla.

Se ke oa jarisa lithapo tsa motlakase le lithapo tse atolositsoeng. Ho jara haholo ho ka fella ka mollo kapa ts'okelo ea motlakase. Sokete ea lebota e tla kenngoa haufi le lisebelisoa 'me e tla fumaneha habonolo.

Ho kenya

Se ke oa beha sebonela-hōle holim'a kariki e sa tsitsang, stand, tripod, bracket, kapa tafole. Haeba mochine o oela, o ka ntša motho kotsi 'me oa baka tšenyo e tebileng ho sehlahisoa sena. Sebelisa feela kolotsana, stand, tripod, bracket, kapa tafole e khothaletsoang ke moetsi kapa e rekisoang ka sehlahisoa sena. Latela litaelo tsa moetsi ha u kenya sehlahisoa 'me u sebelise lisebelisoa tse holimo tse khothaletsoang ke moetsi. Motsoako oa sehlahisoa le koloi o lokela ho tsamaisoa ka hloko.

Le ka mohla u se ke ua sutumetsa ntho leha e le efe ka har'a sekotjana sa khabinete ea ho beha leihlo. E ka senya likarolo tsa potoloho e bakang mollo kapa ts'oaetso ea motlakase. Le ka mohla u se ke ua tšolla lintho tse metsi holim'a mochine.

U se ke ua beha karolo e ka pele ea sehlahisoa fatše. Haeba u beha sebali leboteng kapa shelofong, sebelisa sekontiri se amohetsoeng ke moetsi 'me u latele litaelo tsa kit. Tlohela sebaka se itseng ho potoloha leifo joalokaha ho bontšitsoe ka tlase. Ho seng joalo, phepelo ea moea e kanna ea se lekane, ka hona ho chesa haholo ho ka baka mollo kapa ho senya sehlahlo.

Libaka tse Khothallelitsoeng tsa ho Fetola Moea

Ha mochine o kentsoeng leboteng kapa setulong, etsa bonnete ba hore ho na le moea o nepahetseng ka ho siea sebaka se pota-potileng mochine ka tsela e latelang:

• Lehlakore le Letshehadi: Bonyane 10 cm
• Lehlakore le letona: Bonyane 10 cm
• Holimo: Bonyane 10 cm
• Tlase: Bonyane 10 cm

FAQs

• P: Ke lokela ho hokela seipone?
  • A: Monitor e lokela ho hokeloa mochining oa motlakase o theohileng fatše joalo ka ha ho boletsoe leiboleng. Haeba outlet ya hao e sa kenele polaka ya mehala e meraro, sebedisa adaptara ho sila sesebediswa ka polokeho.
• P: A na nka siea sebatli se hoketsoe nakong ea sefefo sa lehalima?
  • A: Ho kgothaletswa ho ntsha sebono nakong ya sefefo sa lehadima kapa ha se ke ke sa sebediswa nako e telele ho se sireletsa tshenyong ka lebaka la ho phahama ha matla.
• P: Ke sebaka se kae seo ke lokelang ho se siea ho pota-pota sehlahlo ha ke se kenya leboteng kapa raka?
  • A: Ho kgothaletswa ho tlohela sebaka se ka tlase ho 10 cm ka lehlakoreng le letšehali, lehlakoreng le letona, ka holimo, le tlase ho mochine ho netefatsa hore moea o na le moea o nepahetseng le ho thibela mocheso o feteletseng.

E2770SD/E2770SD6/E2770SHE/E2770PQU/E2770SH Q2770PQU G2770PQU/G2770PF M2770V/M2870V/M2870VHE/M2870VQ I2770V/I2770VHE/I2770PQ
(Leseli la LED)

Polokeho

Likopano tsa Naha
Likaroloana tse latelang li hlalosa litumellano tsa notation tse sebelisitsoeng tokomaneng ena. Lintlha, Litlhokomeliso, le Litemoso Ho pholletsa le tataiso ena, liboloko tsa mongolo li ka 'na tsa tsamaea le letšoao 'me tsa hatisoa ka mongolo o motenya kapa ka mongolo o tšekaletseng. Li-blocks tsena ke lintlha, litemoso le litemoso, 'me li sebelisoa ka tsela e latelang: ELA HLOKO: ELA HLOKO e bontša lintlha tsa bohlokoa tse u thusang ho sebelisa sistimi ea komporo ea hau hamolemo. TLHOKOMELISO: TLHOKOMELISO e bonts'a tšenyo e ka bang teng ho hardware kapa tahlehelo ea data mme e u bolella mokhoa oa ho qoba bothata. TLHOKOMELISO: TLHOKOMELISO e bontša monyetla oa ho ntša kotsi ’meleng ’me e u bolella mokhoa oa ho qoba bothata boo. Litemoso tse ling li ka hlaha ka mekhoa e meng 'me li ka 'na tsa se tsamaee le letšoao. Maemong a joalo, tlhahiso e tobileng ea temoso e laetsoe ke bolaoli ba taolo.
4
r

Matla
Monitor e lokela ho sebetsoa feela ho tsoa mofuteng oa mohloli oa matla o bontšitsoeng leiboleng. Haeba o sa tiisehe ka mofuta oa motlakase o fanoang lapeng la hau, ikopanye le morekisi oa hau kapa k'hamphani ea motlakase ea lehae.
Sesebelisoa se na le polaka e mehatla e meraro, polaka e nang le phini ea boraro (ea motheo). Plaka ena e tla kenella feela ka har'a motlakase o theiloeng fatše e le karolo ea polokeho. Haeba outlet ea hau e sa kenele polaka ea lithapo tse tharo, kopa setsebi sa motlakase hore se kenye sephetho se nepahetseng, kapa sebelisa adaptara ho sila sesebelisoa ka mokhoa o sireletsehileng. Se ke oa hlola sepheo sa polokeho ea polaka e theiloeng fatše.
Tlosa yuniti nakong ea sefefo sa lehalima kapa ha e ke ke ea sebelisoa nako e telele. Sena se tla sireletsa leihlo ho senya ka lebaka la ho phahama ha matla.
Se ke oa jarisa lithapo tsa motlakase le lithapo tse atolositsoeng. Ho jara haholo ho ka fella ka mollo kapa ts'okelo ea motlakase. Sokete ea lebota e tla kenngoa haufi le lisebelisoa 'me e tla fumaneha habonolo.
5
r

Ho kenya
Se ke oa beha sebonela-hōle holim'a kariki e sa tsitsang, stand, tripod, bracket, kapa tafole. Haeba mochine o oela, o ka ntša motho kotsi 'me oa baka tšenyo e tebileng ho sehlahisoa sena. Sebelisa feela kolotsana, stand, tripod, bracket, kapa tafole e khothaletsoang ke moetsi kapa e rekisoang ka sehlahisoa sena. Latela litaelo tsa moetsi ha u kenya sehlahisoa 'me u sebelise lisebelisoa tse holimo tse khothaletsoang ke moetsi. Motsoako oa sehlahisoa le koloi o lokela ho tsamaisoa ka hloko.
Le ka mohla u se ke ua sutumetsa ntho leha e le efe ka har'a sekotjana sa khabinete ea ho beha leihlo. E ka senya likarolo tsa potoloho e bakang mollo kapa ts'oaetso ea motlakase. Le ka mohla u se ke ua tšolla lintho tse metsi holim'a mochine.
U se ke ua beha karolo e ka pele ea sehlahisoa fatše. Haeba u beha sebali leboteng kapa shelofong, sebelisa sekontiri se amohetsoeng ke moetsi 'me u latele litaelo tsa kit. Tlohela sebaka se itseng ho potoloha leifo joalokaha ho bontšitsoe ka tlase. Ho seng joalo, phepelo ea moea e kanna ea se lekane, ka hona ho chesa haholo ho ka baka mollo kapa ho senya sehlahlo. Sheba ka tlase libaka tse khothaletsoang tsa moea tse potileng sebali ha mochini o kentsoeng leboteng kapa setulong:
6
r

Ho hloekisa
Hloekisa khabinete kamehla ka lesela. U ka sebelisa sesepa se bonolo ho hlakola letheba, ho e-na le sesepa se matla se tla thibela khabinete ea lihlahisoa.
Ha u hloekisa, etsa bonnete ba hore ha ho sesepa se lutlang ka har'a sehlahisoa. Lesela la ho hloekisa ha lea lokela ho ba mahoashe haholo kaha le tla ngoaea skrineng.
Ka kopo, khaola thapo ea motlakase pele u hloekisa sehlahisoa.
7
r

Tse ding
Haeba sehlahiswa se ntsha monko o makatsang, modumo kapa mosi, kgaola polaka ya motlakase HANG-HANG mme o ikopanye le Setsi sa Tshebeletso.
Etsa bonnete ba hore masoba a ho kenya moea ha a koetsoe ke tafole kapa kharetene. Se ke oa kenya leihlo la LCD maemong a sisinyehang haholo kapa maemong a matla haholo nakong ea ts'ebetso. U se ke ua kokota kapa ua lihela mochine nakong ea ts'ebetso kapa lipalangoang. Bakeng sa pontšo e nang le bezel e benyang mosebelisi o lokela ho nahana ka ho beoa ha skrineng kaha bezel e ka baka likhase tse tšoenyang tse tsoang maboneng a haufi le libaka tse khanyang.
8
r

Tlhophiso
Litaba tsa Lebokose

Hlokomela

CD Manual Monitor Base /Stand

Sesebelisoa sa terata

thapo ea MHL

Cable ea Matla ea DVI Cable Analog Cable HDMI Cable ea USB Cable Audio Cable DP Cable
Ha se likhoele tsohle tsa matšoao (Analog , Audio, DVI, USB, DP, MHLand HDMI lithapo) tse tla fanoa bakeng sa linaha le libaka. Ka kopo ikopanye le morekisi oa lehae kapa ofisi ea lekala ea AOC bakeng sa netefatso.

9
r

Seta Boemo
Ka kopo, hlophisa kapa tlosa Stand ho latela mehato e ka tlase. 70S/70V Seta
Tlosa:
70P Setulo:
Tlosa:
10
r

Ho fetola ViewAngle
Bakeng sa ho fetisisa viewHo kgothaletswa ho sheba sefahleho se feletseng sa mochine, ebe o fetola angle ea mochine ho ea ka seo u se ratang. Tšoara sethala e le hore u se ke ua liha sebali ha u fetola angle ea mochine. U khona ho fetola angle ea mochine ho tloha ho -5 ° ho isa ho 25 °.
HLOKOMELA: U se ke ua fetola viewing angle ka holimo ho likhato tse 25 ho qoba tšenyo. HLOKOMELA:
U se ke ua ama skrine ea LCD ha u fetola angle. E ka baka tšenyo kapa ea senya skrine ea LCD. U se ke ua beha letsoho la hao haufi le lekhalo pakeng tsa ho hlahloba le setsi ho qoba kotsi ha u lokisa viewing angle.
11
r

Ho hokela Mohlahlobi
Likhokahano tsa Cable Ka morao ho Monitor le Khomphuta: 1. E2770SD/ E2770SD6/M2770V/M2870V/I2770V
2. E2770SHE
12
r

3 .E2770PQU

4 .Q2770PQU/G2770PQU

5. M2870VHE / I2770VHE/E2770SH
6. M2870VQ
7. I2770PQ

13
r

8.G2770PF
1. Power 2. Analog (D-Sub 15-Pin VGA cable) 3. DVI 4. HDMI 5. Audio in 6. Earphone out 7. Display port 8. HDMI/MHL 9. USB input 10. USB 2.0×2 11 USB 3.0 12. USB 3.0+ e tjhaja kapele 13. AC switch ea motlakase
Ho sireletsa lisebelisoa, kamehla tima PC le LCD monitor pele o hokela. 1. Hokela thapo ea motlakase boema-kepeng ba AC ka morao ho sebali. 2. Hokela ntlha e 'ngoe ea thapo ea D-Sub ea li-pin tse 15 karolong e ka morao ea mochine 'me u hokele ntlha e 'ngoe ho
koung ea D-Sub ea komporo. 3. (Ho ikhethela E hloka karete ea video e nang le boema-kepe ba DVI)Hokela pheletsong e le 'ngoe ea thapo ea DVI ka morao ho mochini.
ebe o hokela pheletsong e 'ngoe ho koung ea DVI ea komporo. 4. (Ho ikhethela E hloka karete ea video e nang le boema-kepe ba HDMI) - Hokela pheletsong e 'ngoe ea thapo ea HDMI ka morao ho
hlokomela le ho hokela pheletsong e 'ngoe ho koung ea HDMI ea komporo. 5. (Boikhethelo bo Hloka karete ea video e nang le boema-kepe ba DP) - Hokela pheletsong e le 'ngoe ea thapo ea DP ka morao ho leihlo
ebe o hokela ntlha e 'ngoe ho koung ea DP ea komporo. 6. (Ho ikhethela E hloka karete ea video e nang le kou ea MHL) - Hokela ntlha e 'ngoe ea thapo ea MHL ka morao ho
hlokomela le ho hokela pheletsong e 'ngoe ho koung ea MHL ea komporo. 7. (Ha ho boikhethelo)Hokela thapo ea molumo ho audio boema-kepeng bo ka morao ba monitor 8. Bulela sehlahlo le komporo ea hau. Haeba sesupo sa hau se hlahisa setšoantšo, ts'ebetso e felile. Haeba e sa hlahise setšoantšo, ka kopo sheba Tharollo ea mathata.
14
r

Tlhokahalo ea sistimi: sheba G2770PF
Mosebetsi oa FreeSync: 1. Mosebetsi oa FreeSync o sebetsa le DisplayPort. 2.Compatible Graphics Card: Lethathamo la khothaletso le tšoana le le ka tlase, hape le ka hlahlojoa ka ho etela KGOTSO · AMD Radeon R9 295X2 · AMD Radeon R9 290X · AMD Radeon R9 290 · AMD Radeon R9 285 · AMD Radeon R7 260X · AMD Radeon R7 260
Ho Hloma Lebota
Ho Lokisetsa ho Kenya Letsoho la Boikhethelo le Tlamang Lebota. 70S/70V
70P
Monitor ena e ka hokelloa leboteng la letsoho leo u le rekang ka thoko. Tlosa motlakase pele ho ts'ebetso ena. Latela mehato ena: 1. Tlosa setsi. 2. Latela litaelo tsa moetsi ho bokella lebota le phahamisa letsoho. 3. Beha letsoho la lebota ka morao ho mochine. Hlophisa masoba a letsoho le masoba a
ka morao ho leihlo. 15
r

4. Kenya li-screws tse 4 ka mekoting ebe u tiisa. 5. Hokela lithapo hape. Sheba bukana ea mosebelisi e tlileng le letsoho la boikhethelo la ho kenya lebota bakeng sa
   ditaelo tsa ho e hokela leboteng. Ela hloko: Li-screw hole tsa VESA ha li fumanehe bakeng sa mefuta eohle, ka kopo ikopanye le morekisi kapa lefapha la semmuso la AOC.
   16
   r

AOC Anti-Blue Light Feature DescriptionKa boikhethelo
Liphuputso li bontšitse hore feela joalokaha mahlaseli a ultra-violet a ka baka tšenyo ea mahlo, mahlaseli a lebone a leputsoa a tsoang ho li-LED a ka baka tšenyo likarolong tse fapaneng tsa leihlo 'me a ama pono ka nako. Sesebelisoa sa AOC Anti-Blue Light se sebelisa theknoloji e bohlale ho fokotsa maqhubu a kotsi a leputsoa ntle le ho ama 'mala kapa setšoantšo sa ponts'o.
17
r

Ho fetola
Ho beha Qeto e nepahetseng
Windows Vista
Bakeng sa Windows Vista: 1 Tobetsa QALA. 2 Tobetsa PANEL EA LAOLI.
3 Tobetsa Ponahalo le Boipheliso.
4 Tobetsa Motho ka mong
18
r

5 Tobetsa Litlhophiso tsa Pontšo. 6 Seta qeto SLIDE-BAR ho Qeto e nepahetseng e seng e setilwe
19
r

Windows XP
Bakeng sa Windows XP: 1 Tobetsa QALA.
2 Tobetsa SETTINGS. 3 Tobetsa LAOLI PANEL. 4 Tobetsa Ponahalo le Lihlooho.
5 Tobetsa habeli BONTŠA.
20
r

6 Tobetsa SETTINGS. 7 Seta qeto SLIDE-BAR ho Qeto e nepahetseng e seng e setilwe
Windows ME/2000
Bakeng sa Windows ME/2000: 1 Tobetsa QALA. 2 Tobetsa SETTINGS. 3 Tobetsa LAOLI PANEL. 4 Tobetsa habeli BONTŠA. 5 Tobetsa SETTINGS. 6 Seta qeto SLIDE-BAR ho Qeto e nepahetseng e seng e setilwe
21
r

Windows 8
Bakeng sa Windows 8: 1. Tobetsa ka ho le letona ebe o tobetsa Lisebelisoa tsohle tlase-le letona la skrine.
2. Beha "View ka” ho ya ho “Sehlopha”. 3. Tobetsa Ponahalo le Motho ka mong.
22
r

4. Tobetsa BONTŠA. 5. Seta qeto SLIDE-BAR hore e be Optimal preset resolution.
   23
   r

Li-hotkeys

E2770SD/M2770V/M2870V/I2770V/E2770SD6

1

Mohloli/Auto/Tsoa

2

Pono e hlakileng/-

3

4:3 kapa Bophara/+

4

Menu/kena

5

Matla

E2770SHE/E2770PQU/Q2770PQU/G2770PQU/M2870VQ/M2870VHE/I2770VHE/I2770PQ/E2770SH

1

Mohloli/Auto/Tsoa

2

Pono e hlakileng/-

3

Molumo/+

4

Menu/kena

5

Matla

G2770PF

1

Mohloli/Auto/Tsoa

2

Mokhoa oa Papali/-

3

Molumo /+

4

Menu/kena

5

Matla

24
r

Hlakola Pono 1. Ha OSD e le sieo, Tobetsa konopo ea "-" ho kenya Clear Vision. 2. Sebelisa likonopo tsa "-" kapa "+" ho khetha pakeng tsa li-setting tse fokolang, tse mahareng, tse matla kapa tse koetsoeng. Tlhophiso ea kamehla e lula e le teng
"Tima".
3. Tobetsa 'me u tšoare konopo ea "-" bakeng sa metsotsoana ea 5 ho kenya Demo e hlakileng ea Vision,' me molaetsa oa "Clear Vision Demo: on" o tla bontšoa skrineng ka nako ea metsotsoana ea 5. Tobetsa konopo ea Menu kapa Tsoa, molaetsa o tla nyamela. Tobetsa 'me u tšoare "-" konopo bakeng sa metsotsoana e 5 hape, Clear Vision Demo e tla tima.
Mosebetsi o hlakileng oa Vision o fana ka setšoantšo se setle ka ho fetisisa viewho ba le boiphihlelo ka ho fetolela litšoantšo tse hlakileng le tse lerootho hore e be litšoantšo tse hlakileng le tse hlakileng.
25
r

Ho sebelisa "MHL(Mobile High-Definition Link)"Ka boikhethelo
1.”MHL” (Mobile High-Definition Link) Karolo ena e u fa monyetla oa ho natefeloa ke livideo le linepe (tse tsoang ho sesebelisoa sa mohala se hoketsoeng se tšehetsang MHL) skrineng sa sehlahisoa. Ho sebelisa sesebelisoa sa MHL, o hloka sesebelisoa sa mohala se netefalitsoeng ke MHL. O ka hlahloba hore na sesebediswa sa hao sa selefouno se teng
MHL e netefalitsoe ho moetsi oa sesebelisoa websebaka. Ho fumana lenane la lisebelisoa tse netefalitsoeng ke MHL, etela MHL ea semmuso websebaka (http://www.mhlconsortium.org). Ho sebelisa tšebetso ea MHL, mofuta oa morao-rao oa software o tlameha ho kengoa sesebelisoa sa mohala. Ho lisebelisoa tse ling tsa mohala, tšebetso ea MHL e kanna ea se fumanehe ho latela ts'ebetso ea sesebelisoa kapa ts'ebetso ea sona. Kaha boholo ba pontšo ea sehlahisoa bo boholo ho feta ba lisebelisoa tsa cellular, boleng ba setšoantšo bo ka 'na ba fokotseha. Sehlahisoa sena se netefalitsoe ka molao ke MHL. Haeba u kopana le bothata bofe kapa bofe ha u sebelisa tšebetso ea MHL, ka kopo ikopanye le moetsi oa sesebelisoa sa mohala. Boleng ba setšoantšo bo ka 'na ba nyenyefala ha litaba (tse tsoang ho sesebediswa sa mohala) tse nang le Resolution e tlase sehlahiswa.
Ho sebelisa “MHL” 1. Hokela boema-kepe ba USB bo bonyenyane sesebedisweng sa selefounu ho [HDMI / MHL] sehlahiswang o sebedisa MHL.
thapo.
Ha thapo ea MHL e sebelisoa, [HDMI / MHL] ke eona feela boema-kepe bo tšehetsang tšebetso ea MHL. Sesebelisoa sa mohala se tlameha ho rekoa ka thoko. 2. Tobetsa konopo ea mohloli ebe o fetohela ho HDMI /MHL ho kenya mokhoa oa MHL. 3. Kamora metsotsoana e ka bang 3, skrine sa MHL se tla hlahisoa haeba mokhoa oa MHL o ntse o sebetsa. Tlhokomeliso: Nako e bontšitsoeng "3 sec hamorao" e ka fapana ho latela sesebelisoa sa mohala.
Ha sesebediswa sa selefounu se sa hokelwa kapa se sa tshehetse MHL
Haeba mokhoa oa MHL o sa kengoa tšebetsong, hlahloba khokahano ea sesebelisoa sa mohala. Haeba mokhoa oa MHL o sa kengoa tšebetsong, hlahloba hore na sesebelisoa sa mohala se tšehetsa MHL. Haeba mokhoa oa MHL o sa kengoa tšebetsong leha sesebelisoa sa mohala se tšehetsa MHL, nchafatsa firmware ea mobile
sesebelisoa ho mofuta oa morao-rao. Haeba mokhoa oa MHL o sa kengoa tšebetsong le ha sesebediswa sa selefounu se tshehetsa MHL, hlahloba hore na sesebediswa sa cellular sa MHL port
ke boema-kepe bo tloaelehileng ba MHL ho seng joalo adaptara ea tlatsetso e lumelletsoeng ke MHL ea hlokahala.
26
r

Litlhophiso tsa OSD

Taelo ea mantlha le e bonolo ea linotlolo tsa taolo.
1. Tobetsa konopo ea MENU ho kenya fensetere ea OSD. 2. Tobetsa – kapa + ho tsamaya hara ditshebetso. Hang ha mosebetsi o lakatsehang o totobalitsoe, tobetsa konopo
MENU-konopo ho kenya tshebetsong. Tobetsa - kapa + ho tsamaea ka har'a menyu e nyane. Hang ha mosebetsi o lakatsehang o totobalitsoe, tobetsa konopo ea MENU ho kenya tshebetsong. 3. Tobetsa - kapa + ho fetola li-setting tsa tšebetso e khethiloeng. Tobetsa AUTO ho tsoa. Haeba u batla ho fetola ts'ebetso e 'ngoe, pheta mehato ea 2-3. 4. Mosebetsi oa Lock ea OSD: Ho notlela OSD, tobetsa o hatelle konopo ea MENU ha mochini o koetsoeng ebe o tobetsa konopo ea matla ho bulela sebali. Ho notlolla OSD, tobetsa o hatelle konopo ea MENU ha mochini o koetsoeng ebe o tobetsa konopo ea matla ho bulela sebali. Lintlha: 1. Haeba sehlahisoa se na le pontšo e le 'ngoe feela, ntho ea "Input Select" e koetsoe. 2. Haeba boholo ba skrini sa sehlahisoa ke 4: 3 kapa qeto ea lets'oao la ho kenya e le sebopeho se pharaletseng, ntho ea "Image Ratio" e koetsoe. 3. E 'ngoe ea mesebetsi e hlakileng ea pono, DCR, Colour Boost, le Picture Boost e kentsoe tšebetsong; mesebetsi e meng e meraro e tingoa ka tsela e nepahetseng.
27
r

Leseli

1 Tobetsa

(Menu) ho hlahisa menu.

2 Tobetsa – kapa + ho kgetha

(Luminance), ebe o tobetsa

ho kena.

3 Tobetsa – kapa + ho kgetha menu e nyane, ebe o tobetsa 4 Tobetsa – kapa + ho lokisa.

ho kena.

5 Tobetsa

ho tsoa.

Phapang e Khanyang

0-100 0-100
Standard

Mongolo

Mokhoa oa Eco

Papali ea Marang-rang

Movie

Gamma DCR Overdrive

Lipapali
Gamma1 Gamma2 Gamma3 Off
On
Leseli le Fokolang (feela bakeng sa G2770PF) le Matla a Mahare
E tima

Phetoho ea Backlight. Phapang ho tsoa ho Digital-register. Mokhoa o tloaelehileng.
Mokhoa oa mongolo.
Mokhoa oa Marang-rang.
Mokhoa oa Papali.
Mokhoa oa lifilimi.
Mokhoa oa Lipapali. Fetola ho Gamma 1. Fetola ho Gamma 2. Fetolela ho Gamma 3. Thibela tekanyo ea phapang e matla. Numella karolelano ea phapang. Fetola nako ea karabo (feela bakeng sa E2770PQU/Q2770PQU/G2770PQU/I27 70VHE/M2870VHE/M2870VQ/I2770PQ /G2770PF/E2770SH)

28

r

FPS
Peisong ea mokhoa oa papali ea RTS
Gamer 1 Gamer 2 e fokotsoe

Taolo ea Moriti

0-100

Bakeng sa ho bapala lipapali tsa FPS(First Person Shppters).E ntlafatsa tema e lefifi lintlha tsa boemo ba batho ba batsho. Bakeng sa ho bapala RTS(Real Time Strategy, ntlafatsa nako ea ho arabela le ho khanya bakeng sa ho hlahisa litšoantšo tse boreleli. Bakeng sa ho bapala lipapali tsa mabelo, E fana ka nako e potlakileng ea karabo le mebala e phahameng. Litlhophiso tsa khetho ea mosebelisi li bolokiloe e le Gamer 1. Litlhophiso tsa khetho ea mosebelisi li bolokiloe joalo ka Gamer 2. Ha ho ntlafatso ka Smartimage game Shadow Control Default ke 50, joale mosebelisi a ka fetola ho tloha ho 50 ho isa ho 100 kapa 0 ho eketsa phapang bakeng sa setšoantšo se hlakileng. 1. Haeba setšoantšo se le sesoeu haholo hoo se ke keng sa bonoa ka ho hlaka, fetola ho tloha ho 50 ho isa ho 100 bakeng sa setšoantšo se hlakileng.

29
r

Tlhophiso ea Litšoantšo

1 Tobetsa

(Menu) ho hlahisa menu.

2 Tobetsa – kapa + ho kgetha

(Setupo sa Litšoantšo), ebe o tobetsa

3 Tobetsa – kapa + ho kgetha menu e nyane, ebe o tobetsa

4 Tobetsa – kapa + ho lokisa.

5 Tobetsa

ho tsoa.

ho kena.

ho kena.

Clock Phase Sharpness H.Position V.Boemo

0-100 0-100 0-100 0-100 0-100

Fetosa Oache ea setšoantšo ho fokotsa lerata la Vertical-Line. Fetola Karolo ea Sets'oants'o ho fokotsa lerata le Horizontal-Line. Fetola bohloeki ba setšoantšo. Fetola boemo bo otlolohileng ba setšoantšo. Fetola boemo bo otlolohileng ba setšoantšo.

30
r

Ho Hlophisa Mebala

1 Tobetsa

(Menu) ho hlahisa menu.

2 Tobetsa – kapa + ho kgetha

(Setupo sa Mebala), ebe o tobetsa

3 Tobetsa – kapa + ho kgetha menu e nyane, ebe o tobetsa

4 Tobetsa – kapa + ho lokisa.

5 Tobetsa

ho tsoa.

ho kena.

ho kena.

Mobala Temp.
Mokhoa oa DCB Moemo oa DCB

Mofuthu o Tloaelehileng Cool sRGB
Mosebedisi
Ntlafatso e Feletseng ea Tlhaho Letlalo le Letala Tšimo ea Sky-blue AutoDetect

Botala bo Botala bo Kgubedu ho bulela kapa ho tima ho bulela kapa ho tima ho bulela kapa ho tima ho bulela kapa ho tima

Hopola Mocheso oa Mobala o Mofuthu ho tsoa ho EEPROM. Hopola Mocheso o Tloaelehileng oa 'Mala ho tsoa ho EEPROM. Hopola Mocheso oa Mobala o Pholile ho tsoa ho EEPROM. Hopola Mocheso oa Mobala oa SRGB ho tsoa ho EEPROM. Red Gain ho tloha Digital-register. Green Gain Digital-ingolisa. Blue Gain ho tsoa ho Digital-register. Tlosa kapa u lumelle mokhoa oa ho ntlafatsa ka botlalo. Thibela kapa bulela Mokhoa oa Letlalo la Tlhaho. Thibela kapa Nolofatsa Mokhoa oa Sebaka sa Green. Thibela kapa Numella Mokhoa oa Sky-blue. Tlosa kapa u lumelle mokhoa oa AutoDetect. Tlosa kapa bulela Demo.

31
r

Matlafatsa Litšoantšo

1 Tobetsa

(Menu) ho hlahisa menu.

2 Tobetsa – kapa + ho kgetha

(Picture Boost), ebe o tobetsa

3 Tobetsa – kapa + ho kgetha menu e nyane, ebe o tobetsa

4 Tobetsa – kapa + ho lokisa.

5 Tobetsa

ho tsoa.

ho kena.

ho kena.

Frame Size Khanya Phapang H. boemo V. boemo Frame e Khanyang

14-100 0-100 0-100 0-100 0-100 ho qala kapa ho tima

Fetola Boholo ba Frame. Fetola Khanya ea Frame. Fetola Phapano ea Frame. Fetosa Frame e tshekaletseng. Fetosa Frame e otlolohileng. Thibela kapa Numella Frame e Khanyang.

32
r

Setup ea OSD

1 Tobetsa

(Menu) ho hlahisa menu.

2 Tobetsa – kapa + ho kgetha

(OSD Setup), ebe o tobetsa

ho kena.

3 Tobetsa – kapa + ho kgetha menu e nyane, ebe o tobetsa 4 Tobetsa – kapa + ho lokisa.

5 Tobetsa

ho tsoa.

ho kena.

1. Boemo V. Boemo Timeout Transparence Language

0-100 0-100 5-120 0-100

Khopotso ea Khefu

hodima kapa ho tima

DP Capaciliby

1.1/1.2

Fetola boemo bo otlolohileng ba OSD. Fetola boemo bo otlolohileng ba OSD. Fetola nako ea OSD. Fetola ponaletso ea OSD. Khetha puo ea OSD. Thibela kapa Nolofatsa (1 hora ea mosebetsi, khefu?) / (Lihora tse 2 tsa mosebetsi, khefu?) 1.Mokhoeng oa DP 1.1, DP-out e hlahisa setšoantšo se feletseng se tsoang ho DP-in haeba DP-in e amohetse data ea setšoantšo. 2. Ka mokhoa oa DP 1.2. (A) DP-out e fana ka setšoantšo se felletseng se tsoang ho DP-in haeba karete ea litšoantšo ea DP e hlahisa data e le 'ngoe ea leihlo. (B) Liphetho tsa DP-out tse latelang tse 1 kapa tse 2 tsa ho beha leihlo setšoantšo haeba karete ea litšoantšo ea DP e hlahisa setšoantšo sa 2 kapa 3 sa ho beha leihlo ka ketane ea daisy.

33
r

Eketsa

1 Tobetsa

(Menu) ho hlahisa menu.

2 Tobetsa – kapa + ho kgetha

(Eketsa), ebe o tobetsa

3 Tobetsa – kapa + ho kgetha menu e nyane, ebe o tobetsa 4 Tobetsa – kapa + ho lokisa.

5 Tobetsa

ho tsoa.

ho kena. ho kena.

Kenyeletso Kgetha Kenyo Kgetha Kenyo Kgetha Kenyo Kgetha Sebali sa Auto Config Off
Karolelano ea setšoantšo
Boitsebiso bo bocha ba DDC-CI

Auto / D-SUB / DVI / HDMI/MHL Khetha mohloli oa lets'oao la ho kenya.

/DP

(E2770PQU/G2770PF)

Auto / Analog / HDMI1/ HDMI2

Khetha mohloli oa lets'oao la ho kenya. (E2770SHE)

Auto / Analog / DVI/HDMI

Khetha mohloli oa lets'oao la ho kenya.(I2770VHE/M2870VHE/E2770SH)

Auto / Analog / DVI

Khetha mohloli oa lets'oao la ho kenya. (E2770SD/M2770V/M2870V/I2770V/E2770SD6)

Auto / Analog / DVI / HDMI / DP

Khetha mohloli oa lets'oao la ho kenya. (Q2770PQU/G2770PQU/M2870VQ/I2770PQ)

Ee kapa che

Itokisetse setšoantšo ho ba sa kamehla.

Lihora tse 0 ho isa ho tse 24

Khetha nako ea nako ea DC.

bophara kapa 4:3 bophara / 4:3 / 1:1 / 17″(4:3) / 19″(4:3) /19″w(16:10) / 21.5″w(16:9) / 22 ″w(16:10) / 23″w(16:9) / 23.6″w(16:9) / 24″w(16:9) / 24″w(16:10) E Feletseng / Sekwere / 1:1 / 17″(4:3) / 19″(4:3) /19″(5:4)/19″W(16:10) / 21.5″W(16:9) / 22″W(16:10) ) / 23″W(16:9) / 23.6″W(16:9) / 24″W(16:9) E kapa Che

Kgetha sebopeho se sephara kapa 4:3 bakeng sa pontsho. Khetha karo-karolelano ea setšoantšo bakeng sa pontšo.(G2770PQU)
Khetha karo-karolelano ea setšoantšo bakeng sa pontšo.G2770PF Bulela/Tlosa Tšehetso ea DDC-CI.

Ee kapa che

Seta menyu hore e be ea kamehla.

Bontša lintlha tsa setšoantšo sa sehlooho le mohloli oa setšoantšo se senyenyane.

34

r

Etsoa

1 Tobetsa

(Menu) ho hlahisa menu.

2 Tobetsa – kapa + ho kgetha

3 Tobetsa

ho tsoa.

(Tsoa), ebe o tobetsa

ho kena.

Etsoa

Tsoa ho OSD e kholo.

35
r

Letšoao la LED
Boemo ba Matla a Felletseng Mokhoa oa ho tima

Botala kapa Blue Orange kapa bofubelu

Mmala oa LED

36
r

Bakhanni

Hlokomela Driver

Windows 2000
1. Qala Windows® 2000 2. Tobetsa konopo ea 'Start', supa ho 'Settings', ebe o tobetsa 'Panel Control'. 3. Penya habeli ho 'Bontša' Icon. 4. Khetha 'Settings' tab ya ebe o tobetsa 'Advanced…'. 5. Khetha 'Monitor' - Haeba konopo ea 'Properties' e sa sebetse, ho bolela hore mochine oa hau o hlophisitsoe hantle. Ka kopo emisa ho kenya. - Haeba konopo ea 'Properties' e sebetsa. Tobetsa konopo ea 'Properties'. Ka kopo latela mehato e fanoeng ka tlase. 6. Tobetsa ho 'Driver' ebe o tobetsa 'Update Driver…' ebe o tobetsa konopo ea 'Next'. 7. Khetha 'Bontša lenane la bakhanni ba tsebahalang bakeng sa sesebelisoa sena e le hore nka khetha mokhanni ea itseng', ebe o tobetsa 'Next' ebe o tobetsa 'Na le disk…'. 8. Tobetsa konopo ea 'Browse…' ebe u khetha drive e loketseng F: ( CD-ROM Drive). 9. Tobetsa konopo ea 'Open', ebe o tobetsa konopo ea 'OK'. 10. Khetha mohlala oa hau oa ho beha leihlo ebe o tobetsa konopo ea 'Next'. 11. Tobetsa konopo ea 'Finish' ebe konopo ea 'Close'. Haeba u ka bona fensetere ea 'Digital Signature Ha e Fumane', tobetsa konopo ea 'E'.
Windows ME
1. Qala Windows® Me 2. Tobetsa ka 'Start' konopo, supa ho 'Settings', 'me joale tobetsa ka' Control Panel'. 3. Penya habeli ho 'Bontša' Icon. 4. Khetha 'Settings' tab ya ebe o tobetsa 'Advanced…'. 5. Khetha konopo ea 'Monitor', ebe o tobetsa konopo ea 'Change…'. 6. Khetha 'Hlalosa sebaka sa mokhanni(E tsoetseng pele)' me u tobetse konopo ea 'Next'. 7. Khetha 'Bontša lenane la bakhanni bohle sebakeng se itseng, kahoo u ka khetha mokhanni oo u o batlang', ebe o tobetsa 'Next' ebe o tobetsa 'Have Disk ...'. 8. Tobetsa konopo ea 'Browse…', khetha drive e loketseng F: ( CD-ROM Drive) ebe o tobetsa konopo ea 'OK'. 9. Tobetsa konopo ea 'OK', khetha mohlala oa hau oa ho beha leihlo ebe o tobetsa konopo ea 'Next'. 10. Tobetsa konopo ea 'Finish' ebe konopo ea 'Close'.
37
r

Windows XP
1. Qala Windows® XP 2. Tobetsa konopo ea 'Qala' ebe o tobetsa 'Paneli ea Taolo'.
3. Khetha 'me u tobetse sehlopheng sa `Ponahalo le Lihlooho'
4. Tobetsa ho 'Bontša' Ntho.
38
r

5. Khetha 'Settings' tab ya ebe o tobetsa ea 'Advanced' konopo.
   6. Khetha 'Monitor' tab - Haeba konopo ea 'Properties' e sa sebetse, ho bolela hore mochine oa hau o hlophisitsoe hantle. Ka kopo emisa ho kenya. - Haeba konopo ea 'Properties' e sebetsa, tobetsa konopo ea 'Properties'. Ka kopo latela mehato e ka tlase.
   7. Tobetsa ho 'Driver' tab ebe o tobetsa konopo ea 'Update Driver…'.
   39
   r
6. Khetha konopo ea 'Kenya ho tsoa lethathamong kapa sebakeng se itseng [e tsoetseng pele]' ebe u tobetsa konopo ea 'E latelang'.
   9. Khetha 'U se ke ua Batla. Ke tla khetha mokhanni ho kenya' konopo ea seea-le-moea. Ebe o tobetsa konopo ea 'Next'.
   10. Tobetsa konopo ea 'Na le disk…', ebe o tobetsa konopo ea 'Browse...' ebe u khetha koloi e loketseng F: (CD-ROM Drive).
   11. Tobetsa konopo ea 'Open', ebe o tobetsa konopo ea 'OK'. 12. Khetha mohlala oa hau oa ho beha leihlo ebe o tobetsa konopo ea 'Next'. Haeba u bona hore 'ha e so fete tlhahlobo ea Logo ea Windows® ho netefatsa hore e lumellana le molaetsa oa Windows® XP', ka kopo tobetsa konopo ea 'Tsoela Pele'. 13. Tobetsa konopo ea 'Finish' ebe konopo ea 'Close'. 14. Tobetsa konopo ea 'Ho lokile' ebe konopo ea 'OK' hape ho koala lebokose la puisano la Display Properties.
   40
   r

Windows Vista
1. Tobetsa "Qala" le "Panel Control". Ka nako eo, tobetsa habeli "Ponahalo le Personalization".
2. Tobetsa "Persalization" ebe "Display Settings". 3. Tobetsa "Advanced Settings ...".
41
r

4. Tobetsa "Properties" ho "Monitor" tab. Haeba konopo ea "Properties" e koetsoe, ho bolela hore tlhophiso ea sesebelisoa sa hau e phethiloe. Monitor e ka sebelisoa joalo ka ha e le. Haeba molaetsa "Windows o hloka ..." o hlaha, joalo ka ha ho bonts'itsoe setšoantšong se ka tlase, tobetsa "Tsoelapele".
   5. Tobetsa "Update Driver ..." ho "Driver" tab.
   6. Sheba lebokose la "Browse my computer for driver software" ebe o tobetsa "Ere ke khethe lethathamong la bakhanni ba lisebelisoa khomphuteng ea ka".
   7. Tobetsa konopo ea 'Na le disk…', ebe o tobetsa konopo ea 'Browse…' ebe u khetha koloi e loketseng F:Driver (CD-ROM Drive). 8. Khetha mohlala oa hau oa ho beha leihlo ebe o tobetsa konopo ea 'Next'. 9. Tobetsa "Koala" "Koala" "OK" "OK" ho li-skrini tse latelang tse bontšitsoeng ka tatellano.
   42
   r

Windows 7
1.Qala Windows® 7 2.Tobetsa konopo ea'Qala' ebe o tobetsa 'Paneli ea Taolo'.
3. Tobetsa ho 'Display' aekhone.
43
r

4.Ckick ho "Change display settings" konopo. 5.Click "Advanced Settings" konopo. 6.Click tab ya "Monitor" ebe o tobetsa konopo ea "Properties".
44
r

7.Tobetsa tab ya "Driver".
8. Bula fensetere ea “Update Driver Software-Generic PnP Monitor” ka ho tobetsa “Update Driver… “’me u tobetse konopo ea “Browse my computer for driver software”.
9. Khetha "E-re ke nke ho tsoa lenaneng la lisebelisoa tsa lisebelisoa khomphuteng ea ka".
45
r

10. Tobetsa konopo ea "E-ba le Disk". Tobetsa konopo ea "Browse" 'me u tsamaise bukeng e latelang: X:Lebitso la Drivermodule (moo X e leng moqapi oa lengolo la drive bakeng sa drive ea CD-ROM).
    11. Khetha "xxx.inf" file ebe o tobetsa konopo ea "Open". Tobetsa konopo ea "OK". 12. Khetha mohlala oa hau oa ho shebella ebe o tobetsa konopo ea "E latelang". The files e tla kopitsoa ho tloha ho CD ho ea ho hard disk drive ea hau. 13. Koala lifensetere tsohle tse butsoeng ebe u ntša CD. 14. Qala hape tsamaiso. Sistimi e tla khetha ka bo eona sekhahla se phahameng sa ho khatholla le Colour Matching Pro e lumellanangfiles.
    46
    r

Windows 8
1. Qala Windows® 8 2. Tobetsa ka ho le letona ebe o tobetsa Lisebelisoa tsohle tse tlase-ho le letona la skrine.
3. Tobetsa letšoao la "Control panel" 4. Beha "View ka” ho ea ho “Litšoantšo tse kholo” kapa “Litšoantšo tse nyane”.
5. Tobetsa ho "Display" aekhone. 47
r

6. Tobetsa konopo ea "Change display settings". 7. Tobetsa konopo ea "Advanced Settings".
   8. Tobetsa tab ya "Monitor" ebe o tobetsa konopo ea "Properties". 48
   r
7. Tobetsa tab "Driver".
   10. Bula fensetere ea “Update Driver Software-Generic PnP Monitor” ka ho tobetsa “Update Driver… ” ebe u tobetsa konopo ea “Browse my computer for driver software”.
   11. Khetha "E re ke nke lethathamong la bakhanni ba lisebelisoa khomphuteng ea ka". 49
   r
8. Tobetsa konopo ea "E-ba le Disk". Tobetsa konopo ea "Browse" 'me u tsamaise bukeng e latelang: X:Lebitso la Drivermodule (moo X e leng moqapi oa lengolo la drive bakeng sa drive ea CD-ROM).
   13. Khetha "xxx.inf" file ebe o tobetsa konopo ea "Open". Tobetsa konopo ea "OK". 14. Khetha mohlala oa hau oa ho shebella ebe o tobetsa konopo ea "E latelang". The files e tla kopitsoa ho tloha ho CD ho ea ho hard disk ea hau
   kganna. 15. Koala lifensetere tsohle tse butsoeng ebe u ntša CD. 16. Qala hape tsamaiso. Sistimi e tla khetha ka bo eona lebelo le holimo la ho khatholla le Mobala o lumellanang
   Matching Profiles.
   50
   r

ke-Menu
Rea u amohela ho software ea "i-Menu" ka AOC. i-Menu e etsa hore ho be bonolo ho fetola sebopeho sa hau sa skrini ka ho sebelisa limmapa tsa skrine ho fapana le konopo ea OSD ho sebali. Ho qeta ho instola, ka kopo latela tataiso ea ho instola.
51
r

e-Saver
Rea u amohela ho sebelisa software ea taolo ea matla ea AOC e-Saver! AOC e-Saver e fana ka mesebetsi ea Smart Shutdown bakeng sa li-monitor tsa hau, e lumella sebali sa hau ho koala ka nako ha yuniti ea PC e le maemong afe kapa afe (On, Off, Sleep or Screen Saver); nako ea sebele ea ho koala e itšetlehile ka khetho ea hau (sheba mohlalaample ka tlase). Ka kopo, tobetsa "driver/e-Saver/setup.exe" ho qala ho instola software ea e-Saver, latela wizate ea instola ho qetela ho kenya software. Tlas'a boemo bo bong le bo bong ba li-PC tse 'ne, u ka khetha ho tsoa ho menu ea ho theola nako eo u e batlang (ka metsotso e seng mekae) hore sebali sa hau se koalehe ka bohona. Example e bontšitsoeng ka holimo: 1) Sebali se ke ke sa tima ha PC e buletsoe. 2) Sesebelisoa se tla koala metsotso e 5 ka mor'a hore PC e tima. 3) Sesebelisoa se tla koala metsotso e 10 ka mor'a hore PC e be boemong ba ho robala / ho ema. 4) Sebapali se tla koala ka bohona metsotso e 20 kamora hore skrini se hlahelle.
U ka tobetsa "RESET" ho seta e-Saver ho li-setting tsa eona tsa kamehla joalo ka tlase.
52
r

Skrine +
Rea u amohela ho software ea "Screen +" ka AOC, Screen + software ke sesebelisoa sa ho arola skrineng sa komporo, se arola komporo ka likarolo tse fapaneng, pane ka 'ngoe e bonts'a fensetere e fapaneng. U hloka feela ho hula fensetere ho fenstere e tsamaellanang, ha u batla ho e fumana. E ts'ehetsa ponts'o ea li-monitor tse ngata ho nolofalletsa mosebetsi oa hau. Ka kopo latela software ea ho instola ho e kenya.
53
r

Tharollo ya mathata

Bothata & Potso Matla a LED ha a TSOE
Ha ho litšoantšo skrineng

Litharollo Tse ka khonehang
Etsa bonnete ba hore konopo ea motlakase e BULETSOE 'me Thapo ea Motlakase e hoketsoe ka nepo setsing sa motlakase se theohileng fatše le ho sehlahlo.
Na thapo ea motlakase e hokahane hantle? Lekola khokahano ea thapo ea motlakase le phepelo ea motlakase.
Na thapo ya letshwao e hoketswe ka nepo? (E hoketswe ka thapo ya letshwao) Sheba kgokelo ya thapo ya letshwao.
Haeba matla a le teng, qala komporo hape ho bona skrine ea pele (skrine ea ho kena), e ka bonoang. Haeba skrine ea pele (skrine ea ho kena) e hlaha, qalisa k'homphieutha ka mokhoa o sebetsang (mokhoa o bolokehileng bakeng sa Windows ME / XP / 2000) ebe u fetola makhetlo a karete ea video. (Sheba ho Setting the Optimal Resolution) Haeba skrini sa pele (sekrine sa ho kena) se sa hlahe, ikopanye le Setsi sa Ts'ebeletso kapa morekisi oa hau.
A na u bona "Input Not Supported" skrineng? U ka bona molaetsa ona ha lets'oao le tsoang kareteng ea video le feta qeto e phahameng le khafetsa eo sebali se ka sebetsanang le eona hantle. Fetola boholo ba qeto le maqhubu ao sebali se ka sebetsanang le ona hantle.
Etsa bonnete ba hore li-Drivers tsa AOC Monitor li kentsoe.

Setšoantšo se Fuzzy 'me se na le Bothata ba ho Finyella ha Ghosting

Fetola Litaolo tsa Phapano le Khanya. Tobetsa ho itokisa. Etsa bonnete ba hore ha u sebelise thapo e atolositsoeng kapa switch box. Re khothaletsa ho hokela sebatli ka kotloloho ho sehokelo sa tlhahiso ea karete ea video ka morao.

Li-Bounces tsa Litšoantšo, Li-Flickers Kapa Paterone ea Wave e Hlaha Setšoantšong

Tsamaisa lisebelisoa tsa motlakase tse ka bakang tšitiso ea motlakase hole haholo le sesupa-tsela. Sebelisa sekhahla se phahameng sa ho khatholla sebali sa hau se khonang ho se etsa qetong eo u e sebelisang.

54

r

Monitor e ntse e tsitsitse ho Off-Mode e sebetsang”

The Computer Power Switch e lokela ho ba boemong ba ON. Karete ea Video ea Khomphuta e lokela ho kenngoa hantle sekoting sa eona. Etsa bonnete ba hore thapo ea video ea leihlo e hokahane hantle le komporo. Lekola thapo ea video ea leihlo 'me u netefatse hore ha ho phini e kobehileng. Etsa bonnete ba hore komporo ea hau ea sebetsa ka ho otla konopo ea CAPS LOCK keyboard ha u ntse u shebile LED ea CAPS LOCK. Lebone la LED le lokela ho BUA kapa HO TLOA ka mor'a ho otla konopo ea CAPS LOCK.

Ha ho o mong oa mebala ea mantlha (RED, GREEN, kapa BLUE)

Lekola thapo ea video ea sebali 'me u netefatse hore ha ho phini e senyehileng. Etsa bonnete ba hore thapo ea video ea leihlo e hokahane hantle le komporo.

Senepe sa skrine ha sea tsepama Fetola Boemo ba H-Boemo le V-Position kapa tobetsa konopo e chesang (Matla/AUTO).
kapa boholo bo nepahetseng Setshwantsho se na le mathata a mmala
Fetola 'mala oa RGB kapa khetha mocheso o lakatsehang oa' mala. (bosoeu ha bo shebahale bo le tšoeu)

Litšitiso tse tšekaletseng kapa tse emeng skrineng

Sebelisa mokhoa oa ho koala oa Windows 95/98/2000/ME/XP Fetola CLOCK le FOCUS. Tobetsa ho itokisa.

Ha e bontšoe skrineng kaofela ka tekanyo ea tharollo ea kamehla

Sebelisa software ea I-menu ho tsoa ho CD (kapa khoasolla ho tsoa ho ofisiri ea AOC website), khetha "reset" kgetho ho fetola.

55
r

Tlhaloso

Tlhaloso e Akaretsang

E2770SD /E2770SHE/M2770V/I2770V/I2770VHE/E2770SD6/E2770SH

Phanele

Lebitso la sehlahisoa Mokhoa oa ho khanna Viewe khonahalang Sync Size Pixel pitch Video Separate Sync. Hlahisa oache ea Matheba a Mmala

E2770SD/E2770SD6/E2770SHE/M2770V/I2770V/I2770VHE/E2770SH
TFT Mmala oa LCD
68.6cm e diagonane
0.3114mm(H)X0.3114mm(V) R, G, B Analog lnterface & Digital Interface H/V TTL 16.7M Mebala 148.5MHz

Meeli ea scan

30 kHz - 83 kHz

Boholo ba scan ninete e holimo (Boholo)

597.89 limilimithara

Mokhoa oa ho hlahloba o otlolohileng 50 Hz - 76 Hz

Boholo ba scan ninete (Boholo)

336.31 limilimithara

Qeto e nepahetseng esale pele

1920x 1080 @60 Hz

Plug & Bapala

VESA DDC2B / CI

E2770SD/ E2770SD6/M2770V/I2770V:D-Sub 15pin; DVI 24pin

Sehokelo sa Resolution Input

E2770SHE:D-Sub 15pin;;HDMI I2770VHE/E2770SH: D-Sub 15pin; DVI 24pin; HDMI;

Kena Analog ea Letšoao la Video: 0.7Vp-p(standard), 75 OHM, TMDS

Mohloli oa Matla

100-240V ~, 50/60Hz

E tloaelehileng

matla

tshebediso

Tšebeliso ea Matla
Tšebeliso ea matla @power-saving Off timer

E2770SD /E2770SD6/I2770V30W E2770SHE/I2770VHE32W M2770V/E2770SH:38W (Boemo ba teko: set Contrast = 50, Brightness = 90) E2770SD /E2770SD6E2770E32SD2770E2770SD2770/I40HE2770E2770E44EXNUMXSDXNUMX/IXNUMXHEXNUMXEXNUMXEXNUMXEXNUMXEXNUMX/IXNUMXVHEXNUMX/IXNUMX/XNUMX = XNUMX. SHXNUMXW MXNUMXV/EXNUMXSH:XNUMXW (Boemo ba teko: Beha Khanya le Phapang ho boholo)
0.5W
0-24 lihora

Libui

2WX2(E2770SH)

Mofuta oa Sehokahanyi sa 'Mele
Litšobotsi

E2770SD/M2770V/I2770V /E2770SD6:D-Sub ; DVI-D E2770SHE:D-Sub ; HDMI

56

r

Thempereichara ea Mofuta oa Cable ea Letšoao: Mongobo oa Tikoloho: Bophahamo:

I2770VHE/E2770SH: D-Sub ; DVI-D; HDMI; Detachable

Ts'ebetso e sa sebetseng e sa sebetseng e sa sebetseng

0° ho isa ho 40° -25° ho 55° 10% ho isa ho 85% (e sa nyenyefatseng) 5% ho isa ho 93% (e sa kolekeng) 0~ 3658m (0~ 12000 ft ) 0~ 12192m (0~ 40000 ft)

57
r

E2770PQU/I2770PQ

Phanele

Lebitso la sehlahisoa Mokhoa oa ho khanna Viewe khonahalang Sync Size Pixel pitch Video Separate Sync. Hlahisa oache ea Matheba a Mmala

Meeli ea scan

Boholo ba scan ninete e holimo (Boholo)

Lekhahla la scan ninemanga.com

Boholo ba scan ninete (Boholo)

Qeto e nepahetseng esale pele

Plug & Bapala

Qeto

Sesebelisoa sa ho kenya
Kenya Mohloli oa Matla oa Letšoao la Video

Tšebeliso e tloaelehileng ea matla

Tšebeliso ea Matla

Tšebeliso ea matla @power-saving Off timer
Libui

Ea nama

Mofuta oa Sehokelo

Litšobotsi Mofuta oa Cable oa Letšoao

Mocheso:

Mongobo oa Tikoloho:

Altitude:

E2770PQU/I2770PQ TFT Mmala LCD 68.6cm diagonal 0.3114mm(H)X0.3114mm(V) R, G, B Analog lnterface & Digital Interface H/V TTL 16.7M Mebala 148.5MHz

30 kHz - 83 kHz
597.89 limilimithara
50 Hz - 76 Hz
336.31 limilimithara
1920x 1080 @60 Hz
VESA DDC2B / CI
E2770PQU:D-Sub 15pin; DVI 24pin; HDMI(MHL); DP
I2770PQ:D-Sub 15pin; DVI 24pin; HDMI; DP
Analog: 0.7Vp-p (e tloaelehileng), 75 OHM, TMDS
100-240V~, 50/60Hz E2770PQU32W I2770PQ:31W (Boemo ba teko: beha Phapang = 50, Khanya = 90) E2770PQU40W I2770PQ: 39W (Boemo ba teko: Beha Khanya ho 0.5W 0 Ho fapana le 24W 2.

15-pin D-Sub DVI-D HDMI DP Detachable

Ts'ebetso e sa sebetseng e sa sebetseng e sa sebetseng

0° ho isa ho 40° -25° ho 55° 10% ho isa ho 85% (e sa nyenyefatseng) 5% ho isa ho 93% (e sa kolekeng) 0~ 3658m (0~ 12000 ft ) 0~ 12192m (0~ 40000 ft)

58
r

Q2770PQU

Phanele

Qeto
Litšobotsi tsa 'Mele Tikoloho

Lebitso la mohlala Sistimi ea ho khanna Viewe khonahalang Sync Size Pixel pitch Video Separate Sync. Ponahatso ea 'Mala oa Letheba la Letheba
Plug & Play Input Connector Video Signal Mohloli oa Matla
Tšebeliso e tloaelehileng ea matla
Tšebeliso ea Matla Tšebeliso ea matla @power-saving Off timer Libui tsa Mofuta oa Khokahano oa Mofuta oa Letšoao la Mocheso Mocheso: Mongobo o Ts'ebetsong o sa Ts'ebetsong: Bophahamo bo sa Ts'ebetsong: E ​​sa sebetseng

Q2770PQU TFT Mmala LCD 68.6cm diagonal 0.233mm(H)X0.233mm(V) R, G, B Analog lnterface & Digital Interface H/V TTL 16.7M Mebala 241.5MHz 30 kHz – 83 kHz bakeng sa D-Sub 30 kHz – 99 kHz kHz bakeng sa DVI (link tse peli); HDMI ; DP 596.74 limilimithara
50 Hz - 76 Hz 335.66mm 1920x 1080 @60 Hz bakeng sa D-Sub 2560x 1440 @60 Hz bakeng sa DVI (link tse peli); HDMI ; DP feela VESA DDC2B/CI D-Sub 15pin; DVI 24pin; HDMI;DP Analog: 0.7Vp-p(standard), 75 OHM, TMDS 100-240V~, 50/60Hz 45W(Maemo a teko: set Contrast = 50, Brightness = 90) 50W(Boemo ba teko: Beha Khanya le Phapang ho ea ho tse phahameng ) 0.5W 0-24 hrs 2WX2 15-pin D-Sub DVI-D HDMI DP Detachable
0° ho isa ho 40° -25° ho isa ho 55°
10% ho isa ho 85% (ha e fokotsehe) 5% ho isa ho 93% (ha e fokotsehe)
0~ 3658m (0~ 12000 left) 0~ 12192m (0~ 40000 left)

59
r

G2770PQU/G2770PF

Phanele
Qeto Litšobotsi tsa 'Mele
Tikoloho

Lebitso la mohlala Sistimi ea ho khanna Viewe khonahalang Sync Size Pixel pitch Video Separate Sync. Display Color Dot Clock Ho rapalla letoto la skena Lethathamo le otlolohileng la sekeno se otlolohileng G2770PF sekeno se rapameng (Boholo bo phahameng) Mofuta o otlolohileng oa scan ninete ea mofuta o otlolohileng G2770PF Sekeno se otlolohileng Boholo(Boholo) Optimum resolution resolution Optimmal preset resolution Plug & Play Input Connector G2770 Input Connector GXNUMX Kena Mohloli oa Matla oa Letšoao la Video Tšebeliso e tloaelehileng ea matla
Tšebeliso ea Matla Tšebeliso ea matla @power-saving Off timer Libui tsa Mofuta oa Khokahano ea Mofuta oa G2770PF Mocheso oa Mofuta oa Cable ea Letšoao: Mongobo o Ts'ebetsong o sa Ts'ebetsong: Bophahamo bo sa Ts'ebetsong: E ​​Sebetsa e sa Ts'ebetsong.

G2770PQU/G2770PF TFT Mmala LCD 68.6cm diagonal 0.311mm(H)X0.311mm(V) R, G, B Analog lnterface & Digital Interface H/V TTL 16.7M Mebala 330MHz 30 kHz - 83 kHz 30 kHz - 160 kHz (lihokelo tse peli); DP feela 160 kHz - 160 kHz bakeng sa DP feela 597.6mm 50 Hz - 76 Hz 50Hz ~ 146Hz bakeng sa DVI (link tse peli); DP feela 48Hz ~ 146Hz bakeng sa DP feela 336.15mm 1920x 1080 @60 Hz 1920x 1080 @144 Hz bakeng sa DVI (link tse peli); DP feela VESA DDC2B/CI D-Sub 15pin; DVI 24pin; HDMI;DP D-Sub 15pin; DVI 24pin; HDMI/ MHL;DP; Analog: 0.7Vp-p(standard), 75 OHM, TMDS 100-240V~, 50/60Hz 45W(Maemo a teko: beha Phapang = 50, Khanya = 90) 55W(Boemo ba teko: Beha Khanya le Phapang ho fihlela ho boholo) 0.5W 0-24 hrs 2WX2 15-pin D-Sub DVI-D HDMI DP 15-pin D-Sub DVI-D HDMI/ MHL DP Detachable
0° ho isa ho 40° -25° ho isa ho 55°
10% ho isa ho 85% (ha e fokotsehe) 5% ho isa ho 93% (ha e fokotsehe)
0~ 3658m (0~ 12000 left) 0~ 12192m (0~ 40000 left)

60

r

M2870V/ M2870VQ/M2870VHE

Phanele

Lebitso la mohlala

Sistimi ea ho khanna

Viewkhona Sebopeho sa setšoantšo

Sekhahla sa pixel

Video

Arohane Sync.

Mmala oa Pontšo

Tshupa Clock

Qeto

Meeli ea scan

Boholo ba scan ninete e holimo (Boholo)

Lekhahla la scan ninemanga.com

Boholo ba scan ninete (Boholo)

Qeto e nepahetseng esale pele

Plug & Bapala

Sesebelisoa sa ho kenya

Litšobotsi Tsa 'Mele
Tikoloho

Kenya Mohloli oa Matla oa Letšoao la Video
Tšebeliso e tloaelehileng ea matla
Tšebeliso ea Matla Tšebeliso ea matla @power-saving Off timer Libui Mofuta oa Sehokelo
Thempereichara ea Mofuta oa Cable ea Letšoao: Mongobo o Ts'ebetsong o sa Ts'ebetsong: Bophahamo bo sa Sebetsang bo sa Ts'ebetsong: E ​​sa Ts'ebetsong.

M2870V/ M2870VQ/M2870VHE TFT Mmala LCD 71.1cm diagonal 0.32mm(H)X0.32mm(V) R, G, B Analoge lnterface & Digital Interface H/V TTL 16.7M Mebala 148.5MHz 30 kHz 83 kHz620.9 – 50 Hz 76mm 341.2x 1920 @1080 Hz VESA DDC60B/CI (M2V)D-Sub 2870pin; DVI 15pin (M24VHE)D-Sub 2870pin; DVI 15pin; HDMI; (M24VQ)D-Sub 2870pin; DVI 15pin; HDMI;DP Analog: 24Vp-p(standard), 0.7 OHM, TMDS 75-100V~, 240/50Hz 60W(Maemo a teko: set Contrast = 41, Brightness = 50) 90W(Boemo ba teko: Beha Khanya le Phapang ho ea ho tse phahameng ) 49W 0.5-0 hrs 24WX2 (M2VQ) M2870V:D-Sub ; DVI-D M2870VHE:D-Sub ; DVI-D,HDMI M2870VQ:D-Sub ; DVI-D, HDMI;DP Detachable
0° ho isa ho 40° -25° ho isa ho 55°
10% ho isa ho 85% (ha e fokotsehe) 5% ho isa ho 93% (ha e fokotsehe)
0~ 3658m (0~ 12000 left) 0~ 12192m (0~ 40000 left)

61
r

Seta pele Mekhoa ea Pontšo

E2770SD/E2770SD6/E2770SHE/E2770PQU/M2770V/M2870V/I2770V/I2770VHE/M2870VHE/ M2870VQ/I2770PQ/E2770SH

Standard

Qeto

1. Maqhubu (kHz)
2. Hangata (Hz)

VGA

640 X 480@60Hz

31.469

59.94

MAC

640 X 480@67Hz

35

MOKHOA

66.667

VGA

640 X 480@72Hz

37.861

72.809

VGA

640 X 480@75Hz

37.5

75

Mokhoa oa IBM

720 X 400@70Hz

31.469

70.087

800 X 600@56Hz

35.156

56.25

SVGA

800 X 600@60Hz 800 X 600@72Hz

37.879 48.077

60.317 72.188

800 X 600@75Hz

46.875

75

MOKHOA OA MAC

832 X 624@75Hz

49.725

74.551

1024 X 768@60Hz

48.363

60.004

Katoloso ea XGA

1024 X 768@70Hz

56.476

70.069

1024 X 768@75Hz

60.023

75.029

***

1280 X 960@60Hz

60

60

SXGA

1280 X 1024@60Hz 1280 X 1024@75Hz

63.981 79.976

60.02 75.025

***

1280X 720@60Hz

44.772

59.855

WXGA+

1440 X 900@60Hz

55.935

59.876

WSXGA +

1680 X 1050@60Hz

65.29

59.95

FHD

1920 X 1080@60Hz

67.5

60

62
r

Q2770PQU VGA e tloaelehileng
Mokhoa oa MAC VGA VGA
Mokhoa oa IBM
SVGA
MOKHOA OA MAC
Katoloso ea XGA
*** SXGA
*** WXGA+ WSXGA+
FHD WQHD

Qeto
640 X 480@60Hz 640 X 480@67Hz 640 X 480@72Hz 640 X 480@75Hz 720 X 400@70Hz 800 X 600@56Hz 800 X 600 @ 60 Hz 800 X 600 Hz 72 Hz 800 Hz Hz 600 X 75@832Hz 624 X 75@1024Hz 768 X 60@1024Hz 768 X 70@1024Hz 768 X 75@1280Hz 960 X 60@1280Hz 1024 X 60@1280Hz 1024Hz 75 X 1280 @ 720Hz 60Hz 1440 900 z 60 X 1680@1050Hz 60 X 1920@1080Hz 60 X 2560@1440Hz

31. Maqhubu (kHz)
    31.469 35
    37.861 37.5
    31.469 35.156 37.879 48.077 46.875 49.725 48.363 56.476 60.023
    60 63.981 79.976 44.772 55.935 65.29
    67.5 88.787
32. Hangata (Hz)
    59.94 66.667 72.809
    75 70.087 56.25 60.317 72.188
    75 74.551 60.004 70.069 75.029
    60 60.02 75.025 59.855 59.876 59.95
    60 60

WQHD Mode(2560×1440) bakeng sa Q2770PQU model DVI(dual link), Display Port feela; Bakeng sa HDMI, qeto e phahameng ka ho fetisisa e tšehetsang skrine e boetse ke 2560 x 1440, empa kamehla e itšetlehile ka bokhoni ba hau ba karete ea litšoantšo le libapali tsa BluRay / video.

63
r

G2770PQU/G2770PF
Standard

VGA

SVGA
XGA SXGA WXGA (DVI/HDMI/DP) WSXGA (DVI/HDMI/DP)
HD *** (DVI/HDMI/DP) IBM MODES DOS MAC MODES VGA MAC MODES SVGA
HD(feela DVI/DP)

Qeto
640×480@60Hz 640×480@72Hz 640×480@75Hz 800×600@56Hz 800×600@60Hz 800×600@72Hz 800×600@75Hz 800×600@100Hz 1024×768@60Hz 1024×768@70Hz 1280×1024@60Hz
1440×900@60Hz
1680×1050@60Hz
1920×1080@60Hz
1280×720@60Hz
720×400@70Hz 640×480@67Hz 832×624@75Hz 1920×1080@100Hz 1920×1080@120Hz 1920×1080@144Hz

31. Maqhubu (kHz)
    31.469 37.861
    37.5 35.156 37.879 48.077 46.875 46.875 48.363 56.476 63.981
32. Hangata (Hz)
    59.94 72.809
    75 56.25 60.317 72.188
    75 75 60.004 70.069 60.02

55.935

59.887

65.29
67.5
45
31.469 35
49.725 113.3 137.2 158.1

59.954
60
60
70.087 66.667 74.551
100 120 144

HDMI/DP Timing(E2770SHE/E2770PQU/Q2770PQU/G2770PQU /I2770VHE/M2870VQ/M2870VHE/ E2770SH/G2770PF)

Format 480P 480P 576P 720P 1080P

Qeto 640 X 480 720 X 480 720 X 576 1280 X 720 1920 X 1080

Maqhubu a emeng 60Hz 60Hz 50Hz
50Hz, 60Hz 50Hz, 60Hz

MHL Timing(E2770PQU/ G2770PF)

Format 480P 480P 576P 720P 1080P

Qeto 640 X 480 720 X 480 720 X 576 1280 X 720 1920 X 1080

Tlanya SD SD SD HD HD

Maqhubu a emeng 60Hz 60Hz 50Hz
50Hz,60Hz 30Hz,50Hz,60Hz 64

r

Likabelo tsa Pin

15-Pin Mmala Pontšo ea Pontšo ea Pontšo

Pin No. 1 2 3 4 5 6 7 8

Lebitso la Letshwao Video-Kgubedu Video-Tala Video-Boputsoa NC Fumana Cable GND-R GND-G GND-B

Phini No. 9 10 11 12 13 14 15

Lebitso la Letshwao +5V Ground NC DDC-Serial data H-sync V-sync DDC-Serial clock

24-Pin Mmala Pontšo ea Pontšo ea Pontšo

Nomoro ea Pin
1 2 3 4 5 6 7 8 9 10 11 12

24-Pin Color Display Signal Cable TMDS data 2 TMDS data 2 TMDS data 2/4 Shield TMDS data 4 TMDS data 4
DDC Clock DDC Data NC TMDS data 1 TMDS data 1 TMDS data 1/3 Shield TMDS data 3

Nomoro ea Pin
13 14 15 16 17 18 19 20 21 22 23 24

24-Pin Color Display Signal Cable TMDS data 3 5V Power Ground (for+5V) Hot Plug Fumana lintlha tsa TMDS 0 data TMDS 0 data TMDS 0/5 Shield TMDS data 5 TMDS data 5
TMDS Clock Shield TMDS Clock + TMDS Clock

65
r

19-Pin Mmala Pontšo ea Pontšo ea Pontšo

Pin No. Lebitso la Letshwao

Pin No. Lebitso la Letshwao

1

Lintlha tsa TMDS 2+

9

Lintlha tsa TMDS 0

2

TMDS Data 2 Sireletso

10

Oache ea TMDS +

3

Lintlha tsa TMDS 2

11

Theko ea TMDS Clock

4

Lintlha tsa TMDS 1+

12

Oache ea TMDS

5

Lintlha tsa TMDS 1Shield

13

CEC

6

Lintlha tsa TMDS 1

14

E bolokiloe (NC ho sesebelisoa

7

Lintlha tsa TMDS 0+

15

SCL

8

TMDS Data 0 Sireletso

16

SDA

Pin Signal Name No. 17 DDC/CEC Ground 18 +5V Power 19 Hot Plug Detect

20-Pin Mmala Pontšo ea Pontšo ea Pontšo

Phini No. 1 2 3 4 5 6 7 8 9 10

Lebitso la Letshwao ML_Lane 3 (n) GND ML_Lane 3 (p) ML_Lane 2 (n) GND ML_Lane 2 (p) ML_Lane 1 (n) GND ML_Lane 1 (p) ML_Lane 0 (n)

Phini No. 11 12 13 14 15 16 17 18 19 20

Lebitso la Letshwao GND ML_Lane 0 (p) CONFIG1 CONFIG2 AUX_CH(p) GND AUX_CH(n) Hot Plug Detect Return DP_PWR DP_PWR

66
r

Hokela le ho Bapala
Plug & Play DDC2B Feature Monitor ena e na le bokhoni ba VESA DDC2B ho latela VESA DDC STANDARD. E lumella sebali ho tsebisa sistimi ea moamoheli hore na ke mang, mme, ho latela boemo ba DDC e sebelisitsoeng, ho fana ka tlhaiso-leseling e eketsehileng mabapi le bokhoni ba eona ba ho bonts'a. DDC2B ke mocha oa data oa mahlakore a mabeli o thehiloeng ho protocol ea I2C. Moamoheli a ka kopa tlhahisoleseling ea EDID holim'a mocha oa DDC2B.
67
r

Taolo

Tsebiso ea FCC
FCC Class B Radio Frequency Interference Statement TLHOKOMELISO: (BAKENG SA MEHLALA E TSERETSENG FCC) ELA HLOKO: Thepa ena e lekoa 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ho kamohelo ea seea-le-moea kapa ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e 'ngoe kapa ho feta tsa mehato e latelang: Ho shebisa hape kapa suthisa lenakana le amohelang. . Eketsa karohano pakeng tsa thepa le moamoheli. Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona. Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.
TSEBISO : Liphetoho kapa litokiso tse sa amoheloeng ka kotloloho ke lehlakore le ikarabellang bakeng sa tsamaiso li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa. Lithapo tsa sehokelo tse sirelelitsoeng le thapo ea motlakase ea AC, haeba li teng, li tlameha ho sebelisoa molemong oa ho tsamaisana le meeli ea tlhahiso. Moetsi ha a ikarabelle bakeng sa tšitiso efe kapa efe ea seea-le-moea kapa TV e bakoang ke phetoho e sa lumelloeng ea thepa ena. Ke boikarabello ba mosebelisi ho lokisa tšitiso e joalo. Ke boikarabello ba mosebelisi ho lokisa tšitiso e joalo.
68
r

WEEE PhatlalatsoKa boikhethelo
Ho Lahloa ha Lisebelisuoa tsa Litšila ke Basebelisi malapeng a Poraefete ho European Union.
Letšoao lena sehlahisoang kapa sephutheloana sa sona le bontša hore sehlahisoa sena ha sea lokela ho lahloa le litšila tse ling tsa ntlo ea hau. Ho e-na le hoo, ke boikarabello ba hao ho lahla thepa ea hau ea litšila ka ho e nehela sebakeng se khethiloeng sa pokello bakeng sa ho sebelisoa hape. thepa ea motlakase le ea elektroniki.Pokello e arohaneng le ho sebelisoa bocha ha lisebelisoa tsa hau tsa litšila nakong ea ho lahloa ho tla thusa ho baballa mehloli ea tlhaho le ho netefatsa hore e sebelisoa hape ka mokhoa o sireletsang bophelo ba batho le tikoloho. Ho fumana lintlha tse ling mabapi le moo u ka lahlang lisebelisoa tsa hau tsa litšila hore li sebelisoe hape, ka kopo ikopanye le ofisi ea toropo ea heno, tšebeletso ea ho lahlela lithōle kapa lebenkele leo u rekileng sehlahisoa seo ho lona.
WEEE Declaration for IndiaOptional
Letšoao lena sehlahisoang kapa sephutheloana sa sona le bontša hore sehlahisoa sena ha sea lokela ho lahloa le litšila tse ling tsa ntlo ea hau. Ho e-na le hoo, ke boikarabello ba hao ho lahla litšila tsa hau ka ho li nehelana ka sebaka se khethiloeng sa pokello bakeng sa ho tsosolosa litšila tsa lisebelisoa tsa motlakase le tsa elektroniki. Pokello e arohaneng le ho sebelisoa hape ha thepa ea litšila ea hau nakong ea ho lahloa ho tla thusa ho baballa mehloli ea tlhaho le ho netefatsa hore e sebelisoa hape ka mokhoa o sireletsang bophelo bo botle ba batho le tikoloho. Ho fumana lintlha tse ling mabapi le moo u ka lahlang lisebelisoa tsa hau tsa litšila bakeng sa ho sebelisoa hape India ka kopo etela tse ka tlase web sehokelo. www.aocindia.com/ewaste.php. Sehlahisoa sena se lumellana le melaoana eohle e kentsoeng tšebetsong ea mofuta oa RoHS lefatšeng ka bophara, ho kenyeletsoa empa ho sa felle feela, EU, Korea, Japan, US States (mohlala, California), Ukraine, Serbia, Turkey, Vietnam le India. Re tsoela pele ho beha leihlo, ho susumetsa le ho nts'etsapele lits'ebetso tsa rona ho latela melaoana e tlang ea mofuta oa RoHS, ho kenyeletsoa, ​​​​Brazil, Argentina, Canada.
Thibelo ho Polelo ea Lintho Tse Kotsi (India)
Sehlahiswa sena se dumellana le "India E-waste Rule 2011" mme e thibela tshebediso ya lead, mercury, hexavalent chromium, polybrominated biphenyls kapa polybromi-nated diphenyl ethers ka bongata bo fetang 0.1 weight % le 0.01 weight % bakeng sa cadmium, ntle le bakeng sa ho lefiswa ho Shejule ea 2 ea Molao.
69
r

EPA Energy Star
ENERGY STAR® ke letšoao le ngolisitsoeng la US. Joaloka ENERGY STAR® Partner, AOC International (Europe) BV le Envision Peripherals, Inc. ba entse qeto ea hore sehlahisoa sena se kopana le tataiso ea ENERGY STAR® bakeng sa ho sebetsa hantle ha matla. (BAKENG SA MEFUTA E TSERETSENG EPA)
EPEAT Phatlalatso
EPEAT ke mokhoa o thusang bareki ba mafapha a sechaba le a poraefete ho lekola, ho bapisa le ho khetha likhomphutha tsa komporo, libuka tsa ho ngolla lintlha le li-monitor ho latela litšobotsi tsa bona tsa tikoloho. EPEAT hape e fana ka sete e hlakileng le e tsitsitseng ea litekanyetso tsa ts'ebetso bakeng sa moralo oa lihlahisoa, 'me e fana ka monyetla bakeng sa bahlahisi ho boloka kananelo ea mmaraka bakeng sa boiteko ba ho fokotsa tšusumetso ea tikoloho ea lihlahisoa tsa eona.
AOC e lumela ho sireletsa tikoloho. Ka ho ameha haholo ka paballo ea lisebelisoa tsa tlhaho, hammoho le ts'ireletso ea lithōle, AOC e phatlalatsa ho thakholoa ha lenaneo la AOC monitor's package recycling. Lenaneo lena le etselitsoe ho u thusa ho lahla lebokose la hau la li-monitor le lisebelisoa tsa ho tlatsa hantle. Haeba setsi sa lehae sa recycled se sa fumanehe, AOC e tla u sebelisa hape lisebelisoa tsa ho paka, ho kenyelletsa le foam filler le carton. Tharollo ea AOC Display e tla boela e sebelise liphutheloana tsa AOC tsa ho hlahloba. Ka kopo sheba tse latelang webAterese ea sebaka: Ke tsa Amerika Leboea le Boroa feela, ntle le Brazil: http://us.aoc.com/about/environmental_impact Bakeng sa Jeremane: http://www.aoc-europe.com/en/service/tco.php Bakeng sa Brazil: http://www.aoc.com.br/2007/php/index.php?req=pagina&pgn_id=134 (BAKENG SA EPEAT Silver CERTIFED MODELS)
70
r

EPEAT Phatlalatso
EPEAT ke mokhoa o thusang bareki ba mafapha a sechaba le a poraefete ho lekola, ho bapisa le ho khetha likhomphutha tsa komporo, libuka tsa ho ngolla lintlha le li-monitor ho latela litšobotsi tsa bona tsa tikoloho. EPEAT hape e fana ka sete e hlakileng le e tsitsitseng ea litekanyetso tsa ts'ebetso bakeng sa moralo oa lihlahisoa, 'me e fana ka monyetla bakeng sa bahlahisi ho boloka kananelo ea mmaraka bakeng sa boiteko ba ho fokotsa tšusumetso ea tikoloho ea lihlahisoa tsa eona. AOC e lumela ho sireletsa tikoloho. Ka ho ameha haholo ka paballo ea lisebelisoa tsa tlhaho, hammoho le ts'ireletso ea lithōle, AOC e phatlalatsa ho thakholoa ha lenaneo la AOC monitor's package recycling. Lenaneo lena le etselitsoe ho u thusa ho lahla lebokose la hau la li-monitor le lisebelisoa tsa ho tlatsa hantle. Haeba setsi sa lehae sa recycled se sa fumanehe, AOC e tla u sebelisa hape lisebelisoa tsa ho paka, ho kenyelletsa le foam filler le carton. Tharollo ea AOC Display e tla boela e sebelise liphutheloana tsa AOC tsa ho hlahloba. Ka kopo sheba tse latelang webAterese ea sebaka: Ke tsa Amerika Leboea le Boroa feela, ntle le Brazil: http://us.aoc.com/about/environmental_impact Bakeng sa Jeremane: http://www.aoc-europe.com/en/service/tco.php Bakeng sa Brazil: http://www.aoc.com.br/2007/php/index.php?req=pagina&pgn_id=134 (BAKENG SA EPEAT MEFULO E FUMANENG KHAUTA)
71
r

TCO TOKOMANE
(BAKENG SA MEMELA TSE HLOKOMENG TCO) 72
r

Tshebeletso

Setatamente sa Warranty bakeng sa Europe

TIISETSO E LEKOANE YA LILEMO TSE THARO*
Bakeng sa li-AOC LCD Monitors tse rekisoang ka hare ho Europe, AOC International (Europe) BV e fana ka tumello ea hore sehlahisoa sena se se be le sekoli ho thepa le moetso oa nako ea lilemo tse tharo (3) kamora letsatsi la mantlha la theko ea bareki. Nakong ena, AOC International (Europe) BV, ka boikhethelo ba eona, e tla lokisa sehlahisoa se senyehileng ka likarolo tse ncha kapa tse hahiloeng bocha, kapa ho e nkela sebaka ka sehlahisoa se secha kapa se tsosolositsoeng ntle le tefo ntle le * e boletsoeng ka tlase. Ha bopaki ba theko bo le sieo, waranti e tla qala likhoeli tse 3 kamora letsatsi la tlhahiso le bonts'itsoeng sehlahisoa.
Haeba sehlahisoa se bonahala se haella, ka kopo ikopanye le morekisi oa lehae kapa u bue le karolo ea litšebeletso le tšehetso ho www.aoc-europe.com bakeng sa litaelo tsa tiisetso naheng ea heno. Litšenyehelo tsa thepa bakeng sa waranti e lefshoa esale pele ke AOC bakeng sa ho tsamaisa le ho khutlisa. Ka kopo etsa bonnete ba hore o fana ka bopaki ba nako ea theko hammoho le sehlahisoa 'me u se isa Setsing sa Ts'ebeletso se Tiisitsoeng kapa se Amohelitsoeng sa AOC tlas'a maemo a latelang:
Etsa bonnete ba hore LCD Monitor e pakiloe ka lebokoseng le nepahetseng la lebokose (AOC e khetha lebokose la lebokose la pele ho sireletsa leihlo la hau hantle nakong ea lipalangoang).
Beha nomoro ea RMA atereseng ea aterese Beha nomoro ea RMA lebokoseng la thomello
AOC International (Europe) BV e tla lefa litefiso tsa ho khutlisa thepa ka har'a e 'ngoe ea linaha tse boletsoeng ka har'a polelo ena ea tiisetso. AOC International (Europe) BV ha e ikarabelle bakeng sa litšenyehelo life kapa life tse amanang le ho tsamaisa sehlahisoa ho tšela meeli ea machaba. Sena se kenyeletsa moeli oa machaba ka hare ho European Union. Haeba LCD Monitor e le sieo bakeng sa ho bokelloa ha motho ea tsamaisang khariri a le teng, o tla lefisoa chelete ea ho bokella.
* Tiisetso ena e lekanyelitsoeng ha e koahele tahlehelo kapa tšenyo e bang teng ka lebaka la:
Tšenyo nakong ea lipalangoang ka lebaka la ho paka ka mokhoa o sa lokelang Ho kengoa kapa ho hlokomeloa ka mokhoa o fosahetseng ka nako eo ho latela bukana ea mosebelisi ea AOC Ho se tsotelle Lebaka leha e le lefe ntle le ts'ebeliso e tloaelehileng ea khoebo kapa indasteri Ho lokisoa ka mohloli o sa lumelloeng Ho lokisoa, ho fetoloa, kapa ho kenya likhetho kapa likarolo ke mang kapa mang ntle le AOC e netefalitsoeng kapa
Setsi sa Ts'ebeletso se Amohileng Litikoloho tse sa nepahalang joalo ka mongobo, tšenyo ea metsi le lerole E sentsoe ke pefo, litšisinyeho tsa lefatše le litlhaselo tsa bokhukhuni Ho futhumala ho feteletseng kapa ho sa lekaneng kapa moea o pholisa moea kapa ho felloa ke matla ha motlakase, ho tšutloa ha maqhubu, kapa tse ling.
mefokolo
Tiisetso ena e lekanyelitsoeng ha e kenyelle leha e le efe ea firmware ea sehlahisoa kapa hardware eo uena kapa motho ofe kapa ofe oa boraro le e fetotseng kapa ho e fetola; ke uena feela ea nang le boikarabelo le boikarabello bakeng sa liphetoho leha e le life tse joalo.
73
r

Li-Monitor tsa AOC LCD kaofela li hlahisoa ho latela litekanyetso tsa leano tsa pixel tsa ISO 9241-307 Class 1. Haeba tiisetso ea hau e felile, u ntse u khona ho fumana lits'ebeletso tsohle tse fumanehang, empa u tla ikarabella bakeng sa litšenyehelo tsa ts'ebeletso, ho kenyeletsoa likarolo, mosebetsi, thomello (haeba e teng) le lekhetho le sebetsang. Setsi sa Ts'ebeletso sa AOC se netefalitsoeng kapa se lumelletsoeng se tla u fa khakanyo ea litšenyehelo tsa lits'ebeletso pele u fumana tumello ea ho etsa ts'ebeletso. DITITISETSO TSOHLE TSE BONANG LE TSE REANG HO SEBELISA SEHLAHISO ENA (HO KAKARETSA DITIISETSO TSA THEKISO LE HO TSHWANELA HO SEBELISA MORERO O KHETHENG) LI FUMANEHA KA NAKO EA LILEMO TSE THARO (3) BAKENG SA LIKAROLO LE MOSEBETSI OA HO TLOHA KA LETSATSI LA TLHOKOMELISO. HA HO NA LITIISETSO (TSE BONANG KAPA TSE BOLELANG) TSE SEBELISANG KA MOR'A NAKO ENA. LITLHAKISO TSA AOC INTERNATIONAL (EUROPE) BV LE LIPHEKO TSA HAO MONA KE FEELA LE KA HO KHETHA JOALOKAHA HO BOLELOA MONA. AOC INTERNATIONAL (EUROPE) BV LIABILITY, E KA BA MOTHO E THEHELETSENG HO KHONteraka, TORT, WARRANTY, STRICT LIABILITY, KAPA KHOPOLO E MONG, E KE KE E FEELA THEKO YA UNIT YA MOTHO KA MONG EO BOHLOKO KAPA TSEBE E LE MOTHEO WA TSEKO. HA HO MOTHO OA AOC INTERNATIONAL (EUROPE) BV E TLA IKOLABALA BAKENG SA TAHLEHELO EFE EA LIPHALE, TAHLEHELO EA TŠEBELETSO KAPA MESEBETSI KAPA LISEBETSI, KAPA TŠENYEHO E LING TSOHLE, E TSOANG KA TENG, KAPA E TSOANG. LIBUA TSE LING HA LI LUMELLE HO KHETHWA KAPA MOEDISO WA DITIRAGALO KAPA TSE TLA LATELANG, KA HONA MOEDIO O KA hodimo O KA SE SEBELE HO WENA. LE HOJA TIISETSO ENA E LEKANYANE E U FUMANA LITOKELO TSE KHETHEHILENG TSA MOLAO, U KA BA LE LITOKELO TSE LING, TSE KA FAPANANG HO EA KA NAHA HO EA KA NAHA. TIISETSO ENA E LE EDILENG E SEBELETSA FEELA BAKENG SA LIHLAHISO TSE REKOANG HO LINAHA TSE TSOANG LITHO TSE LING TSA MOKHATLO OA EUROPE.
Lintlha tse tokomaneng ena li ka fetoha ntle le tsebiso. Ho fumana lintlha tse ling, ka kopo etela: http://www.aoc-europe.com
74
r

Setatamente sa Tiisetso bakeng sa Bochabela bo Hare le Afrika (MEA)
Le
Commonwealth of Independent States (CIS)
LIMITED ONE ho isa ho THREE YEARS WARRANTY*
Bakeng sa li-AOC LCD Monitors tse rekisoang ka hare ho Middle East le Afrika (MEA) le Commonwealth of Independent States (CIS), AOC International (Europe) BV e fana ka tumello ea hore sehlahisoa sena se se ke sa ba le bofokoli ba thepa le moetso oa nako e le 'ngoe (1) ho isa ho lilemo tse tharo (3) ho tloha ka letsatsi la tlhahiso ho latela naha e rekisoang. Nakong ena, AOC International (Europe) BV e fana ka Tšehetso ea Tiisetso ea Carry-In (khutlela Setsing sa Tšebeletso) Setsing sa Tšebeletso sa Authorized AOC kapa Dealer le ka khetho ea eona, e ka lokisa sehlahisoa se senyehileng ka likarolo tse ncha kapa tse tsosolositsoeng, kapa ho e nkela sebaka. ka sehlahisoa se secha kapa se hahiloeng bocha ntle le tefo ntle le ha *e boletsoe ka tlase. Joalo ka Leano la Maemo, tiisetso e tla baloa ho tloha ka letsatsi la tlhahiso le khethiloeng ho tloha nomorong ea serial ID ea sehlahisoa, empa tiisetso eohle e tla ba likhoeli tse leshome le metso e mehlano (15) ho isa likhoeling tse mashome a mararo a metso e robong (39) ho tloha MFD (letsatsi la tlhahiso) ho latela naha e rekisoang. . Tiisetso e tla nkuwa bakeng sa dinyewe tse sa tshwaneng le waranti ho ya ka nomoro ya seriale ya ID ya sehlahiswa le bakeng sa dinyewe tse ikgethileng; Invoice ea mantlha/Bopaki ba Receipt ea Theko ea tlama.
Haeba sehlahisoa se bonahala se haella, ka kopo ikopanye le morekisi ea lumelletsoeng oa AOC kapa u bue ka karolo ea litšebeletso le tšehetso ho AOC's. websaete bakeng sa litaelo tsa tiisetso naheng ea heno:
Egepeta: http://aocmonitorap.com/egypt_eng CIS Asia Bohareng: http://aocmonitorap.com/ciscentral Bochabela bohareng: http://aocmonitorap.com/middleeast Afrika Boroa: http://aocmonitorap.com/southafrica Saudi Arabia: http://aocmonitorap.com/saudiarabia
Ka kopo etsa bonnete ba hore u fana ka bopaki ba nako ea theko hammoho le sehlahisoa 'me u se isa Setsing sa Tšebeletso sa Authorized AOC kapa Morekisi tlas'a maemo a latelang:
Etsa bonnete ba hore LCD Monitor e pakiloe ka lebokoseng le nepahetseng la lebokose (AOC e khetha lebokose la lebokose la pele ho sireletsa leihlo la hau hantle nakong ea lipalangoang).
Beha nomoro ea RMA atereseng ea aterese Beha nomoro ea RMA lebokoseng la thomello
* Tiisetso ena e lekanyelitsoeng ha e koahele tahlehelo kapa tšenyo e bang teng ka lebaka la:
Tšenyo nakong ea lipalangoang ka lebaka la ho paka ka mokhoa o sa lokelang Ho kengoa kapa ho hlokomeloa ka mokhoa o fosahetseng ho latela bukana ea mosebelisi ea AOC ea Misuse Neglect Lebaka lefe kapa lefe ntle le ts'ebeliso e tloaelehileng ea khoebo kapa ea indasteri Ho lokisoa ka mohloli o sa lumelloeng.
75
r

Ho lokisa, ho fetola, kapa ho kenya likhetho kapa likarolo ke mang kapa mang ntle le Setsi sa Ts'ebeletso se netefalitsoeng kapa se lumelletsoeng sa AOC.
Litikoloho tse sa nepahalang joalo ka mongobo, tšenyo ea metsi le lerole E sentsoe ke pefo, litšisinyeho tsa lefatše le litlhaselo tsa bokhukhuni Ho futhumala ho feteletseng kapa ho sa lekaneng kapa moea o pholisang kapa ho felloa ke matla ha motlakase, ho phahama ha maqhubu kapa tse ling.
irregularities Tiisetso ena e lekanyelitsoeng ha e kenyelletse efe kapa efe ea firmware ea sehlahisoa kapa hardware eo uena kapa motho ofe kapa ofe oa boraro le e fetotseng kapa ho e fetola; ke uena feela ea nang le boikarabelo le boikarabello bakeng sa liphetoho kapa liphetoho tse joalo.
Li-Monitor tsa AOC LCD kaofela li hlahisoa ho latela litekanyetso tsa leano tsa pixel tsa ISO 9241-307 Class 1.
Haeba tiisetso ea hau e felile, u ntse u khona ho fumana lits'ebeletso tsohle tse fumanehang, empa u tla ikarabella bakeng sa litšenyehelo tsa ts'ebeletso, ho kenyeletsoa likarolo, mosebetsi, thomello (haeba e teng) le lekhetho le sebetsang. AOC Certified, Authorized Service Center kapa morekisi o tla u fa khakanyo ea litšenyehelo tsa litšebeletso pele u fumana tumello ea ho etsa litšebeletso.
DITITISETSO TSOHLE TSE BONANG LE TSE RE MANG KATENG BAKENG SA SEHLAHISO ENA (HO KAKARELETSA DITIISETSO TSA THEKISO LE HO TSHWANELA KA MORERO O KHETHEHILENG) LI LEKELETSO HO NAKO E LE SENG (1) ho isa ho tse tharo (3) BAKENG SA MEKOLO EA MOSEBETSI OA MOSEBETSI. . HA HO NA LITIISETSO (TSE BONANG KAPA TSE BOLELANG) TSE SEBELISANG KA MOR'A NAKO ENA. LITLHAKISO TSA AOC INTERNATIONAL (EUROPE) BV LE LIPHEKO TSA HAO MONA KE FEELA LE KA HO KHETHA JOALOKAHA HO BOLELOA MONA. AOC INTERNATIONAL (EUROPE) BV LIABILITY, E KA BA MOTHO E THEHELETSENG HO KHONteraka, TORT, WARRANTY, STRICT LIABILITY, KAPA KHOPOLO E MONG, E KE KE E FEELA THEKO YA UNIT YA MOTHO KA MONG EO BOHLOKO KAPA TSEBE E LE MOTHEO WA TSEKO. HA HO MOTHO OA AOC INTERNATIONAL (EUROPE) BV E TLA IKOLABALA BAKENG SA TAHLEHELO EFE EA LIPHALE, TAHLEHELO EA TŠEBELETSO KAPA MESEBETSI KAPA LISEBETSI, KAPA TŠENYEHO E LING TSOHLE, E TSOANG KA TENG, KAPA E TSOANG. LIBUA TSE LING HA LI LUMELLE HO KHETHWA KAPA MOEDISO WA DITIRAGALO KAPA TSE TLA LATELANG, KA HONA MOEDIO O KA hodimo O KA SE SEBELE HO WENA. LE HOJA TIISETSO ENA E LEKANYANE E U FUMANA LITOKELO TSE KHETHEHILENG TSA MOLAO, U KA BA LE LITOKELO TSE LING, TSE KA FAPANANG HO EA KA NAHA HO EA KA NAHA. TIISETSO ENA E LE EDILENG E SEBELETSA FEELA BAKENG SA LIHLAHISO TSE REKOANG HO LINAHA TSE TSOANG LITHO TSE LING TSA MOKHATLO OA EUROPE.
Lintlha tse tokomaneng ena li ka fetoha ntle le tsebiso. Ho fumana lintlha tse ling, ka kopo etela: http://www.aocmonitorap.com
76
r

AOC Pixel Policy ISO 9241-307 Sehlopha sa 1
77
r

Setatamente sa Tiisetso bakeng sa Amerika Leboea le Boroa (ntle le Brazil)
TLHOKOMELISO EA LIHLOOHO TSA AOC Colour Monitors Ho kenyeletsoa le tse Rekisitsoeng ka hare ho Amerika Leboea joalo ka ha ho Boletsoe
Envision Peripherals, Inc. e fana ka tumello ea hore sehlahisoa sena se se be le bofokoli ba thepa le moetso oa nako ea lilemo tse tharo (3) bakeng sa likarolo le mosebetsi le selemo se le seng (1) bakeng sa CRT Tube kapa LCD Panel kamora letsatsi la mantlha la theko ea bareki. Nakong ena, EPI ( EPI ke khutsufatso ea Envision Peripherals, Inc. ), ka boikhethelo ba eona, e ka lokisa sehlahisoa se senyehileng ka likarolo tse ncha kapa tse hahiloeng bocha, kapa ho e nkela sebaka ka sehlahisoa se secha kapa se hahiloeng bocha ntle le tefo ntle le ha ho boletsoe. ka tlase. Likarolo kapa sehlahisoa se nkeloang sebaka se fetoha thepa ea EPI.
USA ho fumana litšebeletso tlas'a tiisetso ena e fokolang, letsetsa EPI bakeng sa lebitso la Authorized Service Center e haufi le sebaka sa heno. Fana ka thepa e lefeliloeng esale pele, hammoho le bopaki ba nako ea theko, Setsing sa Tšebeletso se Authorized EPI. Haeba u sa khone ho isetsa sehlahisoa ka seqo:
E kenye ka har'a sets'oants'o sa eona sa pele sa thomello (kapa se lekanang) Beha nomoro ea RMA lengolong la aterese Beha nomoro ea RMA lebokoseng la thomello Insure (kapa u nke kotsi ea tahlehelo / tšenyo nakong ea thomello) Lefa litefiso tsohle tsa thomello.
EPI ha e ikarabelle bakeng sa ts'enyehelo ea sehlahisoa se kenang se sa pakoang hantle. EPI e tla lefa litefiso tsa thomello ka har'a e 'ngoe ea linaha tse boletsoeng ka har'a setatemente sena sa tiisetso. EPI ha e ikarabelle bakeng sa litšenyehelo tse amanang le ho tsamaisa sehlahisoa ho tšela meeli ea machaba. Sena se kenyeletsa meeli ea machaba ea linaha tse ka har'a lipolelo tsena tsa tiisetso.
United States le Canada ikopanye le Morekisi oa hau kapa Tšebeletso ea Bareki ea EPI, Lefapha la RMA ka nomoro ea mahala. 888-662-9888. Kapa o ka kopa Nomoro ea RMA inthaneteng ho www.aoc.com/na-warranty.
* Tiisetso ena e lekanyelitsoeng ha e koahele tahlehelo kapa tšenyo e bang teng ka lebaka la:
Ho romela thepa kapa ho kenya kapa ho lokisa ka tsela e fosahetseng Ho hlokomolohuoa ha Tšebeliso e Mpe Ho se tsotelle Lebaka leha e le lefe ntle le ts'ebeliso e tloaelehileng ea khoebo kapa indasteri Ho lokisoa ka mohloli o sa lumelloeng Ho lokisoa, ho lokisoa, kapa ho kenya likhetho kapa likarolo ke mang kapa mang ntle le Setsi sa Ts'ebeletso se Authorized EPI Tikoloho e sa nepahalang Ho futhumala ho feteletseng kapa ho sa lekana kapa moea. ho felloa ke matla kapa ho felloa ke matla ha motlakase, ho phahama, kapa litšitiso tse ling
Tiisetso ena e lekanyelitsoeng ea lilemo tse tharo ha e kenyelletse leha e le efe ea firmware ea sehlahisoa kapa hardware eo uena kapa motho ofe kapa ofe oa boraro le e fetotseng kapa ho e fetola; ke uena feela ea ikarabellang bakeng sa phetoho kapa phetoho e joalo.
78
r

DITIISETSO TSOHLE TSA SEHLAHISO ENA TSOHLE TSE BONANG LE TSE RE TŠOELETSOANG (HO KAKARETSOA LITIISETSO TSA THEKISO LE HO TSHWANELA HO SEBELISA MORERO O KHETHEHILENG) LI LEkanyelitsoe NAKO EA LILEMO TSE THARO (3) BAKENG SA KAROLO LE MOSEBETSI OA SELEMO SE LE SELELE (1) HO TLOHA LETSATSI LA SEBELE LA HO REKA BAREKI. HA HO NA LITIISETSO (TSE BONANG KAPA TSE BOLELANG) TSE SEBELISANG KA MOR'A NAKO ENA. KUA UNITED STATES OF AMERICA, LITHABAKA TSE LING HA LI LUMELLE MELAELO-MALI HORE NA TIISETSO E FUMANENG E DUMELA HAE HAE KAE, KA LONA MEELI E KA HOLIMO E KA SE SEBELE HO WENA.
LITLHAKISO TSA EPI LE LIPHEKO TSA HAO MONA KE FELA LE HO KHETHA JOALOKAHA HO BOLELOA MONA. BOIKARABELO BA EPI', Ebang bo Thehiloe HO CONTRACT, TORT. TIISETSO, BOIKARABELO TSE TSAMAILENG, KAPA KHOPOLO E MNGWE, E KA SE TLE HO FEELA THEKO YA UNITI YA MOTHO KA MONG EO KGOLEGO KAPA TŠENOLO YA YONA E LE MOTHEO WA TSEKO. HA HO LE TSATSAHALO E TLA ESENELA PERIPHERALS, INC. E TLA BA MOIKARATO BAKENG SA TAHLEHELO EFE EA LIPHALE, TAHLEHELO EA TŠEBELETSO KAPA MESEBETSI KAPA SEBELISA KAPA TŠENYEHO E MANG KA THOBALANO, KA DITIRAGALO, KAPA TLHOKOMELO. KUA UNITED STATES OF AMERICA, LINTLHA TSE LING HA LI LUMELLE HO KAROLO KAPA MOEDISO OA LITOSEKO TSA TSATSAHALO KAPA TSE LATELANG. SO MOEDI O KA HOLIMO O KA SE SEBELE HO WENA. LE HOJA TIISETSO ENA E LEKANE E U FUMANA LITOKELO TSE KHETHEHILENG TSA MOLAO. O KA BA LE DITOKELO TSE DING TSE KA FAPANANG HO YA KA PUSO HO YA KA PUSO.
United States of America, tiisetso ena e lekanyelitsoeng e sebetsa feela bakeng sa Lihlahisoa tse rekiloeng Continental United States, Alaska, le Hawaii. Ka ntle ho United States of America, tiisetso ena e lekanyelitsoeng e sebetsa feela bakeng sa Lihlahisoa tse rekiloeng Canada.
Lintlha tse tokomaneng ena li ka fetoha ntle le tsebiso. Ho fumana lintlha tse ling, ka kopo etela:
USA: http://us.aoc.com/support/warranty ARGENTINA: http://ar.aoc.com/support/warranty BOLIVIA: http://bo.aoc.com/support/warranty CHILE: http://cl.aoc.com/support/warranty COLOMBIA: http://co.aoc.com/warranty COSTA RICA: http://cr.aoc.com/support/warranty DOCAN REPUBLIC: http://do.aoc.com/support/warranty ECUADOR: http://ec.aoc.com/support/warranty EL SALVADOR: http://sv.aoc.com/support/warranty GUATEMALA: http://gt.aoc.com/support/warranty HONDURAS: http://hn.aoc.com/support/warranty NICARAGUA: http://ni.aoc.com/support/warranty PANAMA: http://pa.aoc.com/support/warranty PARAGUAY: http://py.aoc.com/support/warranty PERU: http://pe.aoc.com/support/warranty URUGUAY: http://pe.aoc.com/warranty VENEZUELA: http://ve.aoc.com/support/warranty HAEBA NAHA E SA BITSOE: http://latin.aoc.com/warranty

Litokomane / Lisebelisoa

Tlhaloso: AOC E2770SD LCD Monitor [pdf] Bukana ea Mosebelisi E2770SD LCD Monitor, E2770SD, LCD Monitor, Monitor

Litšupiso

• Bukana ea Mosebelisi