AMs TCS3408 ALS Sensor ea 'Mala e nang le Khethollo e Ikhethileng ea Flicker

Tlhahisoleseding ya Sehlahiswa

TCS3408 ke Sensor ea ALS/Mmala e nang le Khethollo e Ikhethileng ea Flicker. E tla le lisebelisoa tsa tlhahlobo tse kenyelletsang sensor ea TCS3408, EVM Controller Board, Cable ea USB, le Flash Drive. Sensor e na le leseli le mebala (RGB) sensin le khetho e khethiloeng ea flicker.

Litaba tsa Kit

Setsi sa tlhahlobo se kenyelletsa lintlha tse latelang:

1. TCS3408 Karete ea Morali: PCB e nang le sensor ea TCS3408 e kentsoeng
2. EVM Controller Board: E sebelisetsoa ho buisana le USB ho I2C
3. Cable ea USB (A ho Mini B): E hokela selaoli sa EVM ho PC
4. Flash Drive: E kenyelletsa sesebelisoa le litokomane

Ho Odara Boitsebiso

• Khouto ea ho Odara: Tlhaloso: TCS3408 EVM
• Tlhaloso: TCS3408 ALS/ Sensor ea 'Mala e nang le Khethollo e Ikhethileng ea Flicker

Litaelo tsa Tšebeliso ea Sehlahisoa

1. Kenya software ka ho latela litaelo tse ho Bukana ea ho Qala ka Potlako (QSG). Sena se tla kenya mokhanni o hlokahalang bakeng sa sehokelo sa USB le sebopeho sa sesebelisoa sa graphical user interface (GUI).
2. Hokela hardware ka mor'a ho kenya software. Thepa e na le EVM Controller, karete ea morali ea TCS3408 EVM, le thapo ea sebopeho sa USB.
3. Matlafatsa sistimi ka ho hokela molaoli oa EVM ho PC ka USB. LED e tala ka boto e tla benya hang ho bontša matla.
4. Sheba GUI bakeng sa litsamaiso le mesebetsi. GUI, hammoho le database ea TCS3408, QSG, le lintlha tsa kopo tse fumanehang ho li-ams websebaka, fana ka tlhahisoleseding e lekaneng bakeng sa ho lekola sesebelisoa sa TCS3408.
5. Bakeng sa lintlha tse qaqileng tsa meralo, sebopeho, le tlhaiso-leseling ea BOM, sheba litokomane tse kenyellelitsoeng ho kenngoeng ho foldareng ea TCS3408 EVM (All Programs -> ams -> TCS3408 EVM> Documents).

Selelekela

Setsi sa tlhahlobo sa TCS3408 se tla le tsohle tse hlokahalang ho lekola TCS3408. Sesebelisoa se na le leseli le mebala (RGB) le ho lemoha ka mokhoa o ikhethileng.

Litaba tsa Kit

Che.	Ntho	Tlhaloso
1	Karete ea Ngoanana ea TCS3408	PCB e nang le sensor ea TCS3408 e kentsoe
2	EVM Controller Board	E sebelisetsoa ho hokahanya USB le I2C
3	Cable ea USB (A ho ea ho Mini B)	E hokahanya molaoli oa EVM ho PC
4	Flash Drive	E kenyelletsa sesebelisoa sa kopo le litokomane

Ho Odara Boitsebiso

Khoutu ea ho Odara	Tlhaloso
Tlhaloso: TCS3408 EVM	TCS3408 ALS/ Sensor ea 'Mala e nang le Khethollo e Ikhethileng ea Flicker

Rea qala

• Software e lokela ho kenngoa pele e hokela hardware efe kapa efe khomphuteng. Latela litaelo tse fumanehang ho Quick Start Guide (QSG). Sena se laela mokhanni o hlokahalang bakeng sa sebopeho sa USB le sebopeho sa sesebelisoa sa graphical user interface (GUI).
• Tekanyo ea tokomane ena e supa le ho hlalosa litsamaiso tse fumanehang ho GUI. Mmoho le database ea TCS3408, QSG le lintlha tsa ts'ebeliso tse fumanehang ho Ams webSebaka sa marang-rang, ho lokela ho ba le tlhahisoleseling e lekaneng ho lumella tlhahlobo ea sesebelisoa sa TCS3408.

Tlhaloso ea Hardware

• Thepa e na le EVM Controller, karete ea morali ea TCS3408 EVM, le thapo ea sebopeho sa USB. Boto ea taolo ea EVM e fana ka matla le puisano ea I2C ho karete ea morali ka sehokelo sa phini tse supileng. Ha molaoli oa EVM a hokahantsoe le PC ka USB, LED e tala botong e bonesa hang ha e phahama ho bontša hore sistimi e fumana matla.
• Bakeng sa tlhahisoleseling, moralo le tlhaiso-leseling ea BOM, ka kopo bona litokomane tse kenyellelitsoeng le kopo e fumanehang foldareng ea TCS3408 EVM (All Programs -> ams -> TCS3408 EVM> Documents).

Tlhaloso ea Software

Fesetere e kholo (setšoantšo sa 3) e na le menyetla ea tsamaiso, litsamaiso tsa boemo ba tsamaiso, tlhahisoleseding ea lisebelisoa le boemo ba ho rema lifate. Thebo ea ALS e na le li-control bakeng sa ts'ebetso ea ho lemoha leseli. Thebo ea Prox e na le li-setting bakeng sa ts'ebetso ea proximity. Ts'ebeliso e khetha ALS le data e tala ea haufi e tsoela pele, 'me e bala Lux, CCT, le litekanyetso tse khelohang tsa prox.

Hokela Software ho Hardware

• Ha e qala, software e ikamahanya le hardware ka bo eona. Ha e qala ka katleho, software e bonts'a fensetere e kholo, e nang le litsamaiso tse amanang le sesebelisoa se hokahaneng. Haeba software e lemoha phoso, fensetere ea phoso e hlaha. Haeba "Sesebelisoa se sa fumanehe kapa se sa tšehetsoe" se hlaha, netefatsa hore boardboard e nepahetseng e hokahane hantle le boto ea taolo ea EVM. Haeba "Ha e khone ho hokela boto ea EVM" e hlaha, netefatsa hore thapo ea USB e hokahane. Ha boto ea taolo ea EVM e hokahane le USB, LED e tala botong e bonesa hang ha e phahama ho bontša hore thapo ea USB e hokahane le ho fana ka matla ho sistimi.
• Haeba boto ea EVM e khaotsoe beseng ea USB ha lenaneo le ntse le sebetsa, e hlahisa molaetsa oa phoso ebe e fela. Kopanya boto ea EVM hape 'me u qale lenaneo hape.

Menu ea Sisteme

Ka holim'a fensetere ho na le menyetla ea ho hula e ngotsoeng ".File”, “Log”, le “Thuso”. The File menu e fana ka taolo ea boemo ba ts'ebeliso ea mantlha. Lenane la Log le sebelisoa ho laola tšebetso ea ho rema lifate, 'me menu ea Thuso e fana ka lintlha tsa mofuta le litokelo bakeng sa ts'ebeliso.

1. File Lenane
   • The File menu e na le mesebetsi e latelang:
   • Mosebetsi oa Reread Registers o qobella lenaneo ho bala hape lirekoto tsohle tsa taolo ho tsoa sesebelisoa ebe o li hlahisa skrineng. Sena ha se bale data e hlahisoang, hobane lirejista tsena li lula li baloa ha lenaneo le ntse le sebetsa.
   • Lenane la Lux Coefficients le lumella mosebelisi ho Bontša, ho Laela kapa ho Boloka li-coefficients tsa lux tse sebelisoang ho bala lux. Sheba karolo ea ALS Lux Coefficients bakeng sa lintlha tse ling.
   • Tobetsa ho Tsoa taelo ho koala fensetere e ka sehloohong le ho felisa kopo. Lintlha leha e le life tsa log tse sa bolokoang li hlakoloa mohopolong. Sesebelisoa se ka ba haufi ka ho tobetsa "X" e khubelu hukung e kaholimo ho le letona.
2. Log Menu
   • Lenaneo la Log le sebelisetsoa ho laola mosebetsi oa ho rema lifate le ho boloka lintlha tsa log ho file. Log data e bokelloa mohopolong ho fihlela e lahloa kapa e ngolloa data file.
   • Tobetsa Start Logging ho qala mosebetsi oa ho rema lifate. Nako le nako ha lenaneo le khetha tlhahisoleseling e tsoang ho sesebelisoa, e theha lethathamo le lecha le bonts'ang boleng ba data e tala, boleng ba lirekoto tse fapaneng tsa taolo, le litekanyetso tse kentsoeng ke mosebelisi masimong a mongolo haufi le hukung e ka tlase e ka tlase ea fensetere. .
   • Tobetsa Stop Logging ho emisa mosebetsi oa ho rema lifate. Hang ha ho rema lifate ho emisitsoe, data e ka ngolloa ho file, kapa mosebelisi a ka tsoela pele ho bokella lintlha tse ling ka ho tobetsa Qala ho Rema Litlhare hape.
   • Taelo ea Log a Single Entry e etsa hore ho rema lifate ho qale, ho bokelle keno e le 'ngoe, ebe hang-hang u emise hape. Ts'ebetso ena ha e fumanehe ha ho rema lifate ho se ho ntse ho sebetsa.
   • Tobetsa Clear Log ho lahla data efe kapa efe e seng e bokeletsoe. Haeba ho na le data mohopolong, e sa bolokoang ho disk, ts'ebetso ena e bonts'a kapele ho botsa ho netefatsa hore ho lokile ho lahla data.
   • Haeba log e ntse e sebetsa ha mosebetsi ona o tobetse, log e tsoela pele ho sebetsa ka mor'a hore data e teng e lahliloe.
   • Tobetsa Save Log ho boloka data e bokelletsoeng ho csv file. Sena se emisa ts'ebetso ea ho rema lifate, haeba e sebetsa, 'me e bonts'a a file lebokose la puisano ho hlakisa moo u ka bolokang data e kentsoeng. Ea kamehla file nameis e hlalositsoeng karolong ea Log Status le Control Information, empa the file lebitso le ka fetoloa haeba le lakatsa.
3. Menu ea Thuso
   • Menu ya Thuso e na le tshebetso e le nngwe: About.
   • The About tshebetso e bonts'a lebokose la puisano (setšoantšo sa 7) se bontšang tlhahiso-leseling le litokelo tsa litokelo tsa kopo le laebrari. Tobetsa konopo ea OK ho koala fensetere ena le ho tsoela pele.

Litaolo tsa Boemo ba Tsamaiso

• Hang-hang ka tlase ho bar ea menu e ka holimo ho na le li-checkbox tse sebelisetsoang ho laola mesebetsi ea boemo ba tsamaiso ea sesebelisoa sa TCS3408.
• Lebokose la ho hlahloba la Power On le laola tšebetso ea PON ea TCS3408. Ha lebokose lena le hlahlojoa, matla a teng 'me sesebelisoa se ka sebetsa. Ha lebokose lena le sa hlahlojoe, matla a tima 'me sesebelisoa ha se sebetse (Libuka tsa taolo li ntse li ka ngoloa, empa sesebelisoa ha se sebetse).
• Lebokose la tlhahlobo la ALS Enable le laola tšebetso ea AEN ea TCS3408. Ha lebokose lena le khethiloe, sesebelisoa se bokella le ho tlaleha data ea ALS joalo ka ha e hlophisitsoe. Ha lebokose lena le sa hlahlojoe, mesebetsi ea ALS ha e sebetse.

Khetho e Ikemetseng
Ts'ebeliso e itlhahisa ka bo eona data e tala ea TCS3408 ea ALS le Prox haeba e lumelletsoe. Poll Interval e bonts'a nako lipakeng tsa ho baloa ha sesebelisoa.

Boitsebiso ba ID ea Sesebelisoa
K'honeng e ka tlase e ka letsohong le letšehali la fensetere e bonts'a nomoro ea ID ea boto ea EVM Controller, e supa sesebelisoa se sebelisoang mme e bonts'a ID ea sesebelisoa.

Boemo ba Log le Boitsebiso ba Taolo

• Karolo e ka tlase e ka letsohong le letona ea fensetere e na le tlhaiso-leseling ea boemo le litsamaiso bakeng sa mosebetsi oa ho rema lifate:
• Karolo ena e na le mabokose a mongolo a bolokiloeng ho log file ya data le sebelisoa ho haha file lebitso bakeng sa log file. Haeba data e libakeng tsena e fetotsoe, litekanyetso tse ncha li bolokoa ka data efe kapa efe e ncha e kentsoeng. Lenane la kamehla file lebitso le ipapisitse le litekanyetso tsena ka nako eo log file e ngotsoe. Haeba ho se letho le kentsoeng ka har'a mabokose ana, ba khetha nako (".").
• The Count value e bonts'itsoeng ke palo ea palo ea sampha joale ho buffer ea log.
• Theko ea Nako e Fetileng e bonts'a nako e fetileng esale ho qala ho rekoa ha data.

Lethathamo la "ALS".

Karolo e kholo ea skrine e na le tab e ngotsoeng ALS. Litaolo tse tabong ena li arotsoe ka likarolo tse 3, e 'ngoe le e 'ngoe e etsa mosebetsi o ikhethileng.

1. Litaolo tsa ALS
   • Lehlakore le letšehali la tabo ea ALS le na le li-control tsa ho beha litlhophiso tse fapaneng tsa ALS.
   • Taolo ea ATIME e beha mehato ea ho kopanya ALS / mebala ho tloha ho 1 ho isa ho 256.
   • Taolo ea ASTEP e beha nako ea ho kopanya mohato ka mong ka li-increments tsa 2.778µs.
   • Taolo ea AGAIN ke menyu ea ho hula e behang phaello ea analog ea sensor ea ALS. Boleng bo teng ke 1/2x, 1x, 2x, 4x, 8x, 16x, 32x, 64x, 128x, 256x, 512x, le 1024x. Haeba ALS AGC e nolofalitsoe, hula ena e koetsoe e le hore e
   • e ke ke ea nchafatsoa ka letsoho, empa e tla nchafatsoa ho bonts'a maemo a morao-rao a ho fumana phaello (sheba ALS Automatic Gain Control, ka tlase).
   • Lebokose la tlhahlobo la WEN le laola tšobotsi ea ALS Wait. Ha lebokose lena le khethiloe, litekanyetso tsa WTIME le ALS_TRIGGER_LONG li sebelisoa ho fumana nako lipakeng tsa lipotoloho tsa ALS. Ha lebokose lena le sa hlahlojoe, ha ho na nako ea ho leta lipakeng tsa nako ea ALS, 'me litekanyetso tsa WTIME le ALS_TRIGGER_LONG li hlokomolohuoa.
   • Taolo ea WTIME e beha nako ea ho ema lipakeng tsa lipotoloho tsa ALS. WTIME e ka fetoloa ka mehato ea 2.778ms.
   • Taolo ea ALS_TRIGGER_LONG ea lebokose e beha WTIME factor. Ha lebokose lena le hlahlojoa, nako ea ho ema pakeng tsa ALS cycle e atisa ka ntlha ea 16.
   • Lehlakore le letšehali la ALS Tab le na le lebokose le bitsoang Flicker Detection. Lebokose lena le laola tšebetso ea Selective Flicker Detection ea TCS3408.
   • Lebokose la ho hlahloba Enable le tla kenya ts'ebetso ea Flicker Detection.
   • Sebaka sa FD_GAIN se tla bonts'a boleng ba phaello bo sebelisitsoeng bakeng sa Thibelo ea morao-rao ea Flicker. Boleng bona ba phaello bo tla intlafatsa ha sesebelisoa se ntse se lokisa maemo a phaello bakeng sa potoloho ka 'ngoe ea Flicker.
   • Mabokose a 100 Hz le 120 Hz a bontša hore na maqhubu a boletsoeng a fumanoe. Hlokomela hore, ka lebaka la tlhaho ea mehloli ea leseli e fetohang, sephetho se hlahang ke makhetlo a mabeli a maqhubu a mohloli, kahoo mehloli ea hona joale ea 50 Hz le 60 Hz e hlahisa maqhubu a 100 Hz le 120 Hz ka ho latellana.
   • Lebokose la ho hlahloba la Disable FD AGC le tla tima taolo ea othomathike bakeng sa ts'ebetso ea ho lemoha ha flicker. Boemo ba phaello bakeng sa ho lemoha ha bofokoli bo tla lula bo le boemong ba hajoale ha feela bo koetsoe.
   • Bakeng sa ts'ebetso ea ho lemoha ha Flicker, AGC e lumelloa ka mokhoa oa kamehla.
   • Taolo ea PhotoDiodes e u lumella ho khetha hore na ke li-photodiode life tse sebelisetsoang ts'ebetso ea flicker. Ntho ea kamehla ke ho sebelisa feela F1 photodiode. U ka khetha ho sebelisa feela F2-IR photodiode, e nang le "bandwidth" e fokolang (sheba database bakeng sa lintlha tse ling), kapa u ka sebelisa li-photodiode ka bobeli.
   • Karolo e ka tlase e ka letsohong le letšehali la ALS Tab e na le lebokose le bitsoang ALS Automatic Gain Control. Sena se o lumella ho nolofalletsa ts'ebetso ea othomathike bakeng sa ALS.
   • Lebokose la ho hlahloba la Enable le u lumella ho nolofalletsa tšebetso ea ALS AGC. Bakeng sa ts'ebetso ea ALS, AGC e holofalitsoe ka ho sa feleng, 'me e behiloe ke taolo ea AGAIN.
   • Sebaka sa Hona joale AGAIN se tla bonts'a boleng ba phaello bo sebelisitsoeng bakeng sa potoloho ea morao-rao ea ALS. Haeba AGC e buletsoe, e tla bonts'a phaello e khethiloeng ka bo eona. Haeba AGC e koetsoe, boleng bona bo tla bontša maemo a taolo AGAIN ha potoloho ea ALS e sebetsa.
2. ALS Lux Coefficients
   • TCS3408 e fana ka tlhahisoleseling e sebelisetsoang ho bala Lux (yuniti ea khanya). Lux equation bakeng sa TCS3408 e sebelisa motsoako oa data ho tsoa ho sensor le coefficients tse fapaneng ho bala boleng ba Lux. Software e hlophisitsoe esale pele ka li-coefficients bakeng sa tlhophiso ea moea o bulehileng. Ha sensor e behiloe ka mor'a khalase, li-coefficients tse fapaneng li lokela ho kenngoa ka har'a software ho ntlafatsa equation ea Lux. Li-coefficients li ka kenngoa kapa tsa bolokoa ho XML file sebelisa ea File menu. Ho netefatsa sebopeho se nepahetseng sa XML pele boloka li-coefficients tsa hajoale u sebelisa File > Lux Coefficients > Boloka. Hang ha file e bolokiloe, fumana XML file e entsoe le ho e hlophisa ka mongolo o hlophisitsoeng joalo ka notepad ho fetola li-coefficients. Ebe u ea ho File > Lux Coefficients > Laola ebe o kgetha XML file e ntlafalitsoeng.
   • Software e ka boela ea kenya li-coefficients tse ncha ha e qala GUI. Ho etsa sena, boloka XML file joalo ka TCS3408_luxeq.xml bukeng ea litokomane tsa sistimi (%USERPROFILE%\Litokomane, tse tsejoang hape e le Litokomane Tsa Ka).
   • Ha GUI e qala, u tla bona puisano e hlaha ka li-coefficients tse ncha tse hlahang.
   • Haeba u na le bothata ba ho kenya li-coefficients tse ncha, sena se ka 'na sa bontša bothata ka file sebopeho. Setšoantšo sa XML file e tlameha ho ba le likarolo tsohle tse hlokahalang tsa Lux equation tse lokelang ho kenngoa. Sebopeho sa file e latela mokhoa o tloaelehileng oa XML mme e tjena:
3. Lintlha tsa ALS Output
   K'honeng e kaholimo ho le letona la tabo ea ALS e bonts'a data e hlahisoang. Lintlha tsena li ntse li hlahlojoa khafetsa. Nako ea ho khetha e bonts'oa kaholimo ho tab.
   • Hlakola 0 e bonts'a palo ea lintlha tse hlakileng tsa Channel.
   • Red 1 e bonts'a palo ea data ea Red Channel.
   • Green 2 e bonts'a palo ea data ea Green Channel kapa lipalo tsa IR Channel haeba IR Mux e hlahlobiloe.
   • Blue 3 e bonts'a palo ea data ea Blue Channel.
   • Wide 4 e bonts'a palo ea data ea Wideband Channel.
   • Flicker e bonts'a palo ea data ea Flicker Channel ha feela ts'ebetso ea Flicker Detection e koetsoe. Haeba
     Flicker Detection e lumelletsoe, data e fetisetsoa tšebetsong ea Flicker mme sebaka sena se tla bonts'a 0.
   • Lux e bonts'a lux e baloang.
   • CCT e bonts'a thempereichara e baliloeng ea mebala e amanang.
4. Lethathamo la lintlha tsa ALS
   • Karolo e setseng ea tabo ea ALS e sebelisoa ho bonts'a moralo o sebetsang oa litekanyetso tse bokelletsoeng tsa ALS le Lux e baloang. Litekanyetso tsa ho qetela tsa 350 li bokelloa 'me li reriloe ka graph. Ha litekanyetso tse eketsehileng li kenyelletsoa, ​​litekanyetso tsa khale li tla tlosoa ka lehlakoreng le letšehali la graph. Ho qala ts'ebetso ea ho rera, sheba lebokose le reng Enable Plot 'me u khethe leha e le efe ea mabokose a 0, 1, 2, 3, 4, kapa 5.
   • Sekala sa Y-axis ea morero se ka fetoloa ka ho tobetsa metsu e menyenyane ea holimo le tlaase khutlong e ka holimo le letšehali ea morero. Sekala se ka beoa ho matla afe kapa afe a 2 ho tloha ho 64 ho isa ho 65536.

Taba ea "SW Flicker"

• Karolo e kholo ea skrine e na le tab e ngotsoeng SW Flicker. Taba ena e laola ponts'o e thehiloeng ho software e sebelisang lintlha tse tala tse bokelletsoeng ke TCS3408 le software ea FFT ho bona lebone le panyang le ho lekanya khafetsa ea lona.
• Pokello ea data e etsoang bakeng sa pontšo ena e lula e na le lintlha tsa 128 tsa lintlha, tse bokelitsoeng ka tekanyo ea 1 kHz (1 lintlha tsa 128 millisecond) le ho sebetsoa ho sebelisoa XNUMX-point FFT.

1. Litaolo tsa SW Flicker
   • Konopo ea Go, ha e tobetsoa, ​​​​e tsamaisa potoloho e le 'ngoe ea ho lemoha ha Flicker.
   • Lebokose la ho hlahloba le Tsoelang Pele, ha le hlahlojoe, le etsa hore konopo ea Go e tsamaise ho lemoha ha Flicker ka ho tsoelang pele, potoloho e 'ngoe ka mor'a e 'ngoe. Ho emisa lipotoloho, hlakola lebokose lena. Qeto e tla emisa ha pokello ea hajoale e phethoa.
   • Taolo ea FD_GAIN ke menyu ea ho hula e behang phaello ea analog ea sensor ea Flicker. Boleng bo teng ke 1/2x, 1x, 2x, 4x, 8x,16x, 32x, 64x, 128x, 256x, 512x, le 1024x.
   • Ha Taolo ea Auto e hlahlojoa, software e tla hlahloba tse tala tse bokelletsoeng le ho fumana hore na ho eketsa kapa ho fokotsa boleng ba FD_GAIN hoa hlokahala. Haeba boleng bo bocha ba FD_GAIN bo khethiloe, bo hlahisoa hang-hang, empa boleng bo bocha ba FD_GAIN bo ke ke ba sebelisoa ho fihlela dataset e latelang e bokelloa (ebang ke ka ho tobetsa konopo ea Go, kapa hobane lebokose le Tsoelang Pele le khethiloe).
   • Sebaka se ngotsoeng Flicker Freq se tla bonts'a makhetlo a mangata a flicker efe kapa efe e bonoang. Pele ts'ebetso ea Software Flicker e sebetsa, lebala lena le tla hlahisa "n/a". Haeba ho se na sefilimi se fumanoeng, lebala le tla baleha "Ha ho Flicker e Fumanehileng."
2. Flicker Data Plot
   • Sebaka sa "Flicker data plot" se tla bonts'a lintlha tse 128 tsa lintlha tsa Flicker tse bokeletsoeng bakeng sa Software Flicker. Ha taolo ea Show FFT e hlahlojoa, FFT ea lintlha tsena tsa data tse 128 e tla hlaha ka bofubelu.
   • Lintlha tsa FFT li na le lintlha tse 64 tsa boholo, empa DC Point e siiloe.
   • Sekala sa Y-axis ea morero se ka fetoloa ka ho tobetsa metsu e menyenyane ea holimo le tlaase khutlong e ka holimo le letšehali ea morero. Sekala se ka behoa ho matla leha e le afe a 2 ho tloha 16 ho ea ho 512. Ho beha tekanyo ena ho ama pontšo ea data e tala feela - data ea FFT, haeba e bontšoa, e lekanngoa ka tsela e fapaneng bakeng sa pokello e 'ngoe le e' ngoe. Lebaka ke hobane lintlha tsa boholo ba FFT li fapana haholo ho tloha pokellong ho ea ho e 'ngoe 'me maqhubu a lemohuoang a khethoa ho tloha tlhōrōng e phahameng ka ho fetisisa le tekanyo e lekanyelitsoeng ea data ea boholo ba FFT, eseng ka boleng ba eona bo feletseng.

Lisebelisoa

• Bakeng sa tlhaiso-leseling e batsi mabapi le TCS3408, ka kopo sheba datha. Ho fumana leseli mabapi le ho kengoa ha TCS3408 EVM software application ka kopo, sheba ho TCS3408 EVM Quick Start Guide.
• Libuka tsa Moqapi tse sebetsanang le likarolo tse fapaneng tsa tekanyo ea mahlo le lisebelisoa tsa ho metha ka mahlo li teng.
• Lisebelisoa tse Eketsehileng:
  • Lethathamo la lintlha tsa TCS3408
  • Tlhaloso: TCS3408 EVM Quick Start Guide (QSG)
  • Tataiso ea mosebelisi ea TCS3408 EVM (toko ena)
  • Lethathamo la lintlha tsa TCS3408 EVM
  • TCS3408 Tataiso ea Moqapi oa Optical
  • TCS3408 Proximity Design Guide

Tlhahisoleseding ea Phetoho

• Linomoro tsa leqephe le lipalo tsa mofuta o fetileng li ka fapana ho ea ka linomoro tsa maqephe le lipalo tlhabollong ea hajoale.
• Ho lokisoa ha liphoso tsa mongolo ha ho boleloe ka ho hlaka.

Litaba tsa Molao

Litokelo tsa litokelo le boitlhaloso

• Copyright ams AG, Tobelbader Strasse 30, 8141 Premstaetten, Austria-Europe. Matshwao a kgwebo a Ngodisitswe. Litokelo tsohle li sirelelitsoe.
• Litaba tse mona li kanna tsa se hlahisoe, tsa fetoloa, tsa kopanngoa, tsa fetoleloa, tsa bolokoa, kapa tsa sebelisoa ntle le tumello e ngotsoeng ea pele ea mong'a litokelo.
• Demo Kits, Evaluation Kits le Reference Designs li fuoa moamoheli "joalokaha li le" molemong oa lipontšo le tlhahlobo feela 'me ha li nkuoe e le lihlahisoa tse felileng tse reretsoeng ho sebelisoa ke bareki ka kakaretso, lits'ebetso tsa khoebo le lits'ebetso tse nang le litlhoko tse ikhethang. joalo ka empa ha e felle feela ho lisebelisoa tsa bongaka kapa lits'ebetso tsa koloi. Demo Kits, Evaluation Kits le Reference Designs ha li so etsetsoe liteko bakeng sa ho latela litekanyetso le litaelo tsa electromagnetic compatability (EMC), ntle le ha ho boletsoe ka tsela e 'ngoe. Demo Kits, Evaluation Kits le Reference Designs li tla sebelisoa ke basebetsi ba nang le litsebo feela.
• ams AG e na le tokelo ea ho fetola ts'ebetso le theko ea Demo Kits, Evaluation Kits le Reference Designs ka nako efe kapa efe ntle le tsebiso.
• Litiisetso life kapa life tse hlakileng kapa tse boletsoeng, ho kenyeletsoa, ​​​​empa ha li felle feela ho litiisetso tse boletsoeng tsa thekiso le ho tšoaneleha bakeng sa morero o itseng, ha li na thuso. Litlaleho life kapa life le litšenyehelo life kapa life tse tobileng, tse sa tobang, tsa tšohanyetso, tse khethehileng, tse behang mohlala kapa tse bakiloeng ke ho se lekane ha li-Demo Kits, Evaluation Kits le Reference Designs kapa tahlehelo ea mofuta ofe kapa ofe (mohlala, tahlehelo ea ts'ebeliso, data kapa phaello kapa khoebo. tšitiso leha ho le joalo e bakiloe) ka lebaka la ts'ebeliso ea bona ha e akaretsoe.
• ams AG e ke ke ea ikarabella ho moamoheli kapa motho ofe kapa ofe oa boraro bakeng sa litšenyehelo leha e le life, ho kenyeletsoa empa ho sa felle feela ho kotsi ea botho, tšenyo ea thepa, tahlehelo ea phaello, tahlehelo ea tšebeliso, ho sitisoa ha khoebo kapa ka tsela e sa tobang, e khethehileng, ea tšohanyetso kapa ea liphello tse itseng. e mosa, mabapi le kapa e hlahang ka lebaka la phepelo, ts'ebetso kapa ts'ebeliso ea data ea tekheniki e mona. Ha ho tlamo kapa molato ho moamoheli kapa motho ofe kapa ofe oa boraro o tla hlaha kapa o tla tsoa molemong oa AG oa ho fana ka litšebeletso tsa tekheniki kapa tse ling.

Polelo ea RoHS & Ams Green

• E Ikamahanya le RoHS: Poleloana e reng RoHS e lumellana le e bolela hore lihlahisoa tsa ams AG li latela ka botlalo litaelo tsa hona joale tsa RoHS. Lihlahisoa tsa rona tsa semiconductor ha li na lik'hemik'hale bakeng sa mekhahlelo eohle e 6 ea lintho, ho kenyelletsa le tlhokahalo ea hore lead e se fete 0.1% ka boima ba thepa e tšoanang. Moo li etselitsoeng ho rekisoa ka mocheso o phahameng, lihlahisoa tse lumellanang le RoHS li loketse ho sebelisoa mekhoeng e boletsoeng e se nang loto.
• ams Green (e lumellana le RoHS mme ha e na Sb/Br): ams Green e hlalosa hore ntle le ho latela melao ea RoHS, lihlahisoa tsa rona ha li na Bromine (Br) le Antimony (Sb) tse thibelang lelakabe tse thehiloeng ho eona (Br kapa Sb ha li fete 0.1% ka boima ba 'mele). ka lintho tse homogeneous).
• Lintlha tsa Bohlokoa: Lintlha tse fanoeng polelong ena li emela tsebo le tumelo ea AG ho tloha ka letsatsi leo e fanoeng. ams AG e thehile tsebo le tumelo ea eona holim'a lintlha tse fanoeng ke batho ba boraro, 'me ha e fane ka boemeli kapa tiisetso mabapi le ho nepahala ha tlhahisoleseding eo. Boiteko bo ntse bo tsoela pele ho kopanya hamolemo litaba tse tsoang ho batho ba boraro. ams AG e nkile mme e ntse e tsoela pele ho nka mehato e utloahalang ea ho fana ka boitsebiso ba moemeli le bo nepahetseng empa e ka 'na eaba ha ea ka ea etsa liteko tse senyang kapa tlhahlobo ea lik'hemik'hale ho thepa le lik'hemik'hale tse kenang. Ams AG le ams AG bafani ba nka tlhahisoleseding e itseng e le ea mong'a ntlo, kahoo linomoro tsa CAS le lintlha tse ling tse fokolang li ka 'na tsa se ke tsa fumaneha bakeng sa ho lokolloa.

MABAPI KAMPANI

• Ntlo-khōlō
• am AG
• Tobelbader Strasse 30
• 8141 Premstaetten
• Austria, Europe
• Mohala: +43 (0) 3136 500 0
• Ka kopo etela rona website at www.ams.com
• Reka lihlahisoa tsa rona kapa u fumane mahala sample inthaneteng ho www.ams.com/Products
• Tšehetso ea Theknoloji e fumaneha ho www.ams.com/Technical-Support
• Fana ka maikutlo mabapi le tokomane ena ho www.ams.com/Document-Feedback
• Bakeng sa liofisi tsa thekiso, barekisi le baemeli ba ea ho www.ams.com/Contact
• Bakeng sa lintlha tse ling le likopo, re romelle lengolo-tsoibila ho ams_sales@ams.com

Litokomane / Lisebelisoa

AMs TCS3408 ALS Sensor ea 'Mala e nang le Khethollo e Ikhethileng ea Flicker [pdf] Bukana ea Mosebelisi TCS3408 ALS Sensor ea mebala e nang le Khetho e Khethehileng ea Flicker, TCS3408, ALS Color Sensor e nang le Khetho e Khethehileng ea Flicker, Khetho e Khethehileng ea Flicker, Pono ea Flicker.

Litšupiso

• Bukana ea Mosebelisi