Litaba pata
1 Altronix eFlow104NKA8QM Series Lilaoli tsa Matla a Marang-rang a Marang-rang
1.1 DHCP:
2 Litokomane / Lisebelisoa
2.1 Litšupiso
3 Related Posts

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-01

Altronix eFlow104NKA8QM Series Lilaoli tsa Matla a Marang-rang a Marang-rang

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-prodect-senepe

Lethathamo la lintlha tsa eFlow104NKA8QM
Networkable Dual Output
Fumana Balaoli ba Matla
Mefuta e kenyeletsa:
eFlow104NKA8QM

  • 12VDC kapa 5VDC ho fihla ho 6A le / kapa 24VDC ho fihla ho 10A (240W kakaretso ea matla) e khethiloeng ka tlhahiso.
  • Liphetho tse robeli (8) tse ka khonehang tsa fuse li sirelelitsoe
  • Menyetla e robeli (8) ea li-trigger tse ka khonehang
  • Charger e kentsoeng kahare bakeng sa libeteri tsa mofuta oa gel tse tiisitsoeng tsa lead lead

eFlow104NKA8DQM

  • 12VDC kapa 5VDC ho fihla ho 6A le / kapa 24VDC ho fihla ho 10A (240W kakaretso ea matla) e khethiloeng ka tlhahiso.
  • Liphetho tse sirelelitsoeng tsa PTC tse nang le matla a fokolang a robeli (8) tsa Sehlopha sa 2
  • Menyetla e robeli (8) ea li-trigger tse ka khonehang
  • Charger e kentsoeng kahare bakeng sa libeteri tsa mofuta oa gel tse tiisitsoeng tsa lead lead

Tataiso ea ho Kena

Rev. eFlow104NKA8Q-072720 More than just power.TM Installing Company: _______________ Service Rep. Name: _______________________________________ Aterese: _____________________________________________ Phone #: ______________________________

Fetileview:
Altronix eFlow104NKA8QM le eFlow104NKA8DQM li aba le ho fetola matla ho fihlella litsamaiso tsa taolo le lisebelisoa. Ba fetola tlhahiso ea 120VAC 60Hz ho tse robeli (8) tse laoloang ka boikemelo tsa 12VDC kapa 24VDC tse sirelelitsoeng. Moralo oa likarolo tse peli oa Access Power Controller o lumella matla ho tsamaisoa ho tsoa fekthering e 'meli (2) e kentsoeng ka matla a tlase.tage 12 kapa 24VDC Altronix phepelo ea matla ho tse robeli (8) tse laoloang ka mokhoa o ikemetseng (eFlow104NKA8QM) kapa PTC (eFlow104NKA8DQM) tse sirelelitsoeng. Lisebelisoa tsa motlakase li ka fetoloa hore e be mabitso a "C" a omileng. Lintho tse hlahisoang li hlahisoa ke sink e bulehileng, e atisang ho buloa (NO), e atisang ho koaloa (NC) ho kenya mochine o omileng, kapa metsi a tsoang ho Access Control System, Card Reader, Keypad, Push Button, PIR, joalo-joalo eFlow104NKA8(D)QM e tla tsamaisa matla ho lisebelisoa tse fapaneng tsa taolo ea phihlello ea lisebelisoa tse kenyelletsang Mag Locks, Motlakase Strikes, Magnetic Door Holders, joalo-joalo Outputs e tla sebetsa ka mekhoa ea Fail-Safe le / kapa Fail-Secure. FACP Interface e nolofalletsa Emergency Egress, Alarm Monitoring, kapa e ka sebelisoa ho kenya lisebelisoa tse ling tse thusang. Tšobotsi ea ho khaola alamo ea mollo e ka khethoa ka bonngoe bakeng sa liphetho leha e le life kapa kaofela tse robeli (8). Lihokelo tsa li-spade li u lumella ho kenya matla a ketane ho li-module tse ngata tsa LINQ8ACM(CB). Karolo ena e u lumella ho aba matla holim'a liphetho tse ngata bakeng sa litsamaiso tse kholoanyane. LINQTM Network Power Management e hahiloeng kahare e thusa ho lekola, ho tlaleha le ho laola matla / tlhahlobo.

Litlhaloso:
Kenyelletso:
eFlow104NB:

  • 120VAC, 60Hz, 4.5A.

LINQ8ACM(CB):

  • Litlhahiso tse robeli (8):
    1. Ka tloaelo ho bula (NO) ho kenya (likhokahano tse omileng).
    2. Ka tloaelo ho koetsoe (NC) (likhokahano tse omileng).
    3. Bula lisebelisoa tsa sink ea pokello.
    4. Keno e Metsi (5VDC - 24VDC) e nang le 10K resistor
    5. Motsoako ofe kapa ofe oa tse ka holimo.

Liphetho:
Matla:

  • 12VDC kapa 5VDC ho fihla ho 6A, 24VDC ho fihla ho 10A (240W kakaretso ea matla).
  • Motlatsi oa Sehlopha sa 2 se hlahisoang ke matla a lekanyelitsoeng ke @ 1A (e sa rokoe).
  • Ho tlolatagtshireletso.

LINQ8ACM:

  • Liphetho tse sirelelitsoeng tsa Fuse li behiloe @ 2.5A ka tlhahiso, ha e na moeli oa matla. Kakaretso ea tlhahiso 6A max.

LINQ8ACMCB:

  • Liphetho tse sirelelitsoeng tsa PTC li behiloe @ 2A ka tlhahiso, Sehlopha sa 2 se na le matla a fokolang. Kakaretso ea tlhahiso 6A max. Se ke oa feta litekanyetso tsa phepelo ea motlakase ka bomong.
  • Liphetho tse robeli (8) tse laoloang ka boikemelo kapa tse robeli (8) tse laoloang ka mokhoa o sa hlompheheng tsa Foromo ea "C" (sheba ka tlase bakeng sa lintlha):
    1. Fail-Sireletsehile le/kapa Fail-Sireletsehile diphetho tsa matla.
    2. Lisebelisoa tsa motlakase tse thusang (ha li fetotsoe).
    3. Motsoako ofe kapa ofe oa tse ka holimo.
  •  Liphetho tsa motho ka mong li ka hlophisoa ho OFF boemo bakeng sa ts'ebeletso (output jumper set to the middle). Ha e sebetse lits'ebetsong tsa Dry Contact.
  • E fe kapa e fe ho tse robeli (8) tse fehlang motlakase tse sirelelitsoeng tsa fuse/PTC li ka khethoa ho latela Keletso ea 1 kapa Input 2. Output voltage ea tlhahiso e 'ngoe le e 'ngoe e tšoana le matla a ho kenyatage ea tse kentsoeng.
  • Khatello e phahameng.

Lintlha tsa Fuse/PTC:
eFlow104NB:

  • Fuse e kentsoeng ke 6.3A/250V. Fuse ea betri e lekantsoe 15A/32V. LINQ8ACM:
  • Fuse ea mantlha e kenyellelitsoeng ho 15A/32V. Li-fuse tse hlahisoang ke 3A/32V.

LINQ8ACMCB:

  • Kenyelletso ea mantlha PTC e fuoe lintlha tse 9A. Li-PTC tse hlahisoang li fuoe lintlha tse 2A.

Backup ea Battery (eFlow104NB):

  • Tjhaja e hahelletsoeng kahare bakeng sa asiti e tiisitsoeng ea lead kapa libeteri tsa mofuta oa gel
  • Boholo ba tefiso ea hajoale ke 1.54A.
  • Fetolela ka ho iketsa betri e emeng ha AC e hloleha. Matla a ho fetisetsoa ho betri e emeng e etsahala hang hang ha ho na tšitiso.

Tlhokomelo (eFlow104NB):

  • AC e hloleha ho laola (ho theha mabitso a "C").
  • Betri ha e sebetse le ho hlokomela boteng (foromo "C" mabitso).
  • Ho tima matla a tlase. E koala li-terminals tsa DC haeba betri e le matlatage theoha ka tlase ho 71-73% bakeng sa li-unit tsa 12V le 70-75% bakeng sa li-unit tsa 24V (ho itšetlehile ka matla a matla). E thibela ho tsoa ha betri e tebileng.

Ho Khaola Alarm ea Mollo: eFlow104NB:

  • Ho khaoha ha Alamo ea Mollo e hlokometsoeng (ho latching kapa ho se latching) 10K EOL resistor. E sebetsa ho trigger e tloahelehileng e bulehileng (NO) kapa ka tloaelo e koetsoeng (NC).

LINQ8ACM(CB):

  • Ho khaoha ha Alarm ea Mollo (ho latching kapa ho se lache) ho ka khethoa ka bonngoe bakeng sa liphetho tse robeli (8). Likhetho tsa ho kenya Alarm ea Mollo:
    • Hangata e bula [NO] kapa hangata e koetsoe [NC] e omileng ea ho kenya. Kenyelletso ea ho khutlisa polarity ho tsoa ho potoloho ea matšoao a FACP.
  • FACP input WET ke rated 5-30VDC 7mA.
  • Ho kenya FACP EOL e hloka pheletso ea 10K ea mohanyetsi oa mohala.
  • FACP output relay [NC]: Ekaba Dry 1A/28VDC, 0.6 Power Factor kapa 10K ho hanyetsa ka [EOL JMP] e sa fetoheng.

Matšoao a bonoang: eFlow104NB:

  • Tala ea AC LED:                   E bonts'a 120VAC e teng.
  • Red DC LED:                      E supa tlhahiso ea DC.
  • LINQ8ACM(CB):
  • Tala ea AC LED:                   E bontša boemo ba bothata ba AC.
  • LED ea BAT e tala:                E bontša boemo ba bothata ba betri.
  • Tala FACP LED:              E bonts'a hore ho hakolloa ha FACP ho qalile.
  • Botala bo Benyang
    Ho otla ha pelo LED:                  E supa khokahano ea marang-rang.
  • Motho ka mong
    OUT1 – OUT8
    Li-LED tse khubelu:                           Hlalosa hore liphetho li entsoe.
  • Motho ka mong
    Moqtagle li-LED:                     Hlahisa 12VDC (Tala) kapa 24VDC (Khubelu). (sheba leqephe la 5 bakeng sa Tlhahlobo ea LED ea LINQ8ACM(CB)).

Likarolo tse ka Lokisehang (LINQ8ACM(CB)):

  • Liphetho tse robeli (8) tse ka hlophisehang:
    • Liphetho tse hlolehileng, tse sirelelitsoeng kapa tse thusang.
    • Ketso e laoloa kapa e laoloa ka letsoho ka software.
    • Phahameng (ho feta) le tlase (tlase) voltage le tlhokomelo ea hona joale ka tlhahiso.
    • Liphetho tse ngata li ka hlophisoa hore li hlahisoe ke tlhahiso e le 'ngoe.
    • Backup ea betri ka tlhahiso.
  • Menyetla e robeli (8) ea ho qalisa:
    • Hangata e butsoe (NO).
    • Hangata e koetsoe (NC).
    • Bula lisebelisoa tsa sink ea pokello.
    • Keno e Metsi (5VDC – 24VDC) e nang le 10k resistor.
    • Motsoako ofe kapa ofe oa tse ka holimo.
  • Li-ID tsa boema-kepe tse ka reroang.
  • Lekola tlhahiso ea motlakase (ies) bakeng sa voltage le meeli e nepahetseng (e holimo/tlase).
  • Kenyelletso le tlhahiso ea hona joale.
  • Liketsahalo tsa sebali sa nako.
  • Maemo a ka lokisehang a basebelisi.
  • Dumella kapa o tima litlhokomeliso ka mofuta.
  • Ho lieha ho fana ka tlaleho ea tlhokomeliso/

Tikoloho:

  • Mocheso o sebetsang: 0ºC ho isa ho 49ºC tikolohong.
  • Mongobo: 20 ho isa ho 85%, e sa fokotseng.

Kakaretso Dimensions (hoo e ka bang H x W x D): 15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm).
Lethathamo la lintlha tsa eFlow104NKA8DQM

Litlhaloso tsa Boemo:

 

Betri

 Burg. Likopo 4 hr. Ema haufi/

15 mets. Alamo

 Likopo tsa Mollo 24 hr. Ema haufi/

5 mets. Alamo

 Taolo ea ho fihlella

Lisebelisoa E eme
7AH 0.4A/10A N/A 5 mets./10A
12AH 1A/10A 0.3A/10A 15 mets./10A
40AH 6A/10A 1.2A/10A Ho feta lihora tse 2/10A
65AH 6A/10A 1.5A/10A Ho feta lihora tse 4/10A

Litaelo tsa ho Kena:
Mekhoa ea ho kenya likhoele e tla tsamaellana le Khoutu ea Naha ea Motlakase/NFPA 70/NFPA 72/ANSI, Khoutu ea Motlakase ea Canada le likhoutu tsohle tsa lehae le ba boholong ba nang le matla a ho laola. Sehlahisoa se reretsoe ho sebelisoa ka tlung feela.

  1. Beha yuniti sebakeng seo u se batlang. Tšoaea le ho phunya masoba leboteng ho tsamaisana le likoti tse peli tse ka holimo sebakeng se kampetsoeng. Kenya li-fasteners le li-screws tse peli leboteng 'me lihlooho tsa screw li hlahelle. Beha masoba a ka holimo a koaletsoeng holim'a likurufu tse peli tse ka holimo, u be boemong 'me u sireletsehe. Tšoaea boemo ba likoti tse peli tse tlase. Tlosa sebaka se kampetsoeng. Hlakola likoti tse tlase ebe u kenya li-fasteners tse peli. Beha masoba a ka holimo a kokelo holim'a likurufu tse peli tse ka holimo. Kenya li-screws tse peli tse tlase 'me u netefatse hore u tiisa li-screw tsohle
    (Enclosure Dimensions, leqepheng la 8). Sebaka se sireletsehileng sebakeng sa lefats'e.
  2. Etsa bonnete ba hore li-jumpers tsohle tsa tlhahiso [OUT1] - [OUT8] li behiloe sebakeng sa OFF (bohareng) (setšoantšo sa 1, leqephe la 4).

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-02

  1. Hokela un switched AC power (120VAC 60Hz) ho li-terminals tse tšoailoeng [L, N] (Fig. 2a, pg. 6). Tala "AC" LED botong ea phepelo ea motlakase e tla bulela. Leseli lena le ka bonoa ka lense ea LED e monyako oa sebaka se kampetsoeng. Sebelisa 14 AWG kapa e kholoanyane bakeng sa likhokahano tsohle tsa matla. Sireletsehile terata e tala lebisa lefatšeng fatše. Boloka likhoele tse lekanyelitsoeng matla li arohane le lithapo tse se nang matla (120VAC 60Hz Input, Battery Wires). Bonyane sebaka sa sebaka sa 0.25" se tlameha ho fanoa. TLHOKOMELISO: U se ke ua tšoara likarolo tsa tšepe tse pepenene. Koala matla a potoloho ea lekala pele u kenya kapa u sebeletsa lisebelisoa. Ha ho na likarolo tse ka sebelisoang ke basebelisi ka hare. Fetisetsa ho kenya le ho fana ka litšebeletso ho basebeletsi ba nang le tsebo.
  2. Beha sehlahisoa se seng le se seng [OUT1] - [OUT8] ho tsamaisa matla a tsoang ho Input 1 kapa 2 (setšoantšo sa 1, pg. 4).
    Hlokomela: Lekanya tlhahiso voltage pele o kopanya lisebelisoa. Sena se thusa ho qoba tšenyo e ka bang teng.
  3. Tima motlakase pele o hokela lisebelisoa.
  4. Likhetho tsa tlhahiso:eFlow104NKA8DQM e tla fana ka lisebelisoa tsa motlakase tse ka fihlang ho tse robeli (8) hammoho le tse robeli (8) tse fanang ka motlakase o sa fetoheng. Phetoho ea Motlakase o Fetotsoeng: Hokela molaetsa o fosahetseng (–) oa sesebelisoa se tsamaisoang ho terminal e tšoailoeng [COM].
  5. Bakeng sa ts'ebetso ea Fail-Safe, hokela molaetsa o nepahetseng (+) oa sesebelisoa se tsamaisoang ho theminale e tšoailoeng [NC].
  6. Bakeng sa ts'ebetso ea Fail-Sireletsehile, hokela ho kenya letsoho (+) ho sesebelisoa se tsamaisoang ho terminal e tšoailoeng [NO].
    Lisebelisoa tsa Motlakase (ha li fetotsoe):Hokela sesebediswa se nepahetseng (+) se sebediswang ho theminale e ngotsweng [C] le negative (–) ya sesebediswa se tsamaisoang ho theminale e ngotsweng [COM]. Sephetho se ka sebelisoa ho fana ka matla bakeng sa babali ba likarete, li-keypad joalo-joalo.
  7. Laeta motlakase oa mantlha ka mor'a hore lisebelisoa tsohle li hoketsoe.
  8. Likhetho tsa Input Trigger (lenaneo le qala likhetho tsa ho kenya ka software ea LINQ):
    Hlokomela: Haeba ho khaoha ha Alarm ea Mollo ho sa sebelisoe, hokela sehanyetsi sa 10k Ohm ho litheminale tse tšoailoeng [GND le EOL]. Kenyelletso: Hokela taolo e ommeng ea phihlello (NC/NO) ho liteminale tse tšoailoeng [+ INP1 –] ho [+ INP8 –]. Open Collector Sink Input: Hokela sekeno sa sink se bulehileng ho terminal e tšoailoeng [+ INP1 -] ho [+ INP8 -]. Metsi (Moqtage) Tlhophiso e Kenyellelitsoeng: Ka ho ela hloko polarity, hokela voltage input trigger wires le 10K resistor e fanoeng ho li-terminals tse tšoailoeng [+ INP1 –] ho [+ INP8 –].
  9. Likhetho tsa Sehokelo sa Alarm ea Mollo (likhetho tsa sehokelo sa alamo ea mollo oa lenaneo ka software ea LINQ): Ka tloaelo ho koaloa [NC], hangata e bulehileng [NO] ho kenya kapa ho khutlisa polarity ho tsoa ho potoloho ea matšoao a FACP e tla hlahisa liphetho tse khethiloeng. Ka tloaelo
    Bula Kenyeletso:
    Kopanya relay ea hau ea FACP le sehanyetsi sa 10K ka 'moho ho litheminale tse tšoailoeng [GND] le [EOL].
    Kenyelletso e Tloaelehileng:
    Kopanya relay ea hau ea FACP le sehanyetsi sa 10K ho litheminale tse tšoailoeng [GND] le [EOL].
  10. FACP Dry NC tlhahiso:
    Hokela sesebelisoa se lakatsehang se tla hlahisoa ke yuniti e ommeng ea khokahanyo ho litheminale tse tšoailoeng [NC] le [C]. Ha [EOL JMP] e le boemong ba DIS, tlhahiso ke ea 0 Ohm ho hanyetsa boemong bo tloaelehileng. Ha [EOL JMP] e le boemong ba EN, khanyetso ea 10k e tla fetisetsoa sesebelisoa se latelang ha e le boemong bo tloaelehileng.
  11. Lihokelo tsa Battery tse emeng (Setšoantšo sa 3, leqephe la 7, setšoantšo sa 4, leqephe la 8): Bakeng sa lits'ebetso tsa US Access Control li-betri li ka ikhethela. Libetri lia hlokahala bakeng sa ho kenya lisebelisoa tsa Canada (ULC-S319). Ha libetri li sa sebelisoe, tahlehelo ea AC e tla fella ka tahlehelo ea matla a tlhahisotage. Ha tšebeliso ea libeteri tse emeng li lakatseha, e tlameha ho ba acid ea lead kapa mofuta oa gel. Hokela betri ho litheminale tsa LINQ8ACM(CB) tse tšoailoeng [+ BAT –] (Setšoantšo sa 3, leqephe la 7). Sebelisa libeteri tse peli (2) tsa 12VDC tse hokahaneng letotong bakeng sa ts'ebetso ea 24VDC (li-lead tsa betri li kenyelelitsoe). Sebelisa libeteri Cavil CL1270 (12V/7AH), CL12120 (12V/12AH), CL12400 (12V/40AH), CL12650 (12V/65AH) kapa libeteri tse amoheloang ke UL BAZR2 le BAZR8 tsa lintlha tse nepahetseng.
  12. Liphetho tsa Battery le AC Supervision (Setšoantšo sa 3, leqephe la 7, setšoantšo sa 4, leqephe la 8): eFlow104NB ke fektheri e amanang le LINQ8ACM (CB) bakeng sa tsamaiso ea Battery le AC.
  13. Ho liehisa tlaleho ea AC ka lihora tse peli. beha phetoho ea DIP [AC Delay] ho ea ho OFF (setšoantšo sa 2c, leqephe la 2). Ho liehisa tlaleho ea AC bakeng sa 6 min. beha DIP switjha [AC Delay] ho ON boemo (sa feiga. 1c, pg. 2).
  14.  eFlow104NB Alamo ea Mollo Ho Khaoha (Setšoantšo sa 2c, leqephe la 6): Ho etsa hore Alarm ea Mollo e Khaotsoe, seta switjha ea DIP [Shutdown] ho ea ho ON. Ho tima Alamo ea Mollo Hakolla seta switjha ea DIP [Shutdown] ho ea ho OFF.
  15. Ho kenngoa ha tamper switch: Thaba ea UL Listed tamper switch (Altronix ea mohlala TS112 kapa e lekanang le eona) ka holimo ho sebaka se kampetsoeng. Tsamaisa tamper switjha bracket moeling oa sebaka se koaletsoeng hoo e ka bang 2 "ho tloha ka lehlakoreng le letona (setšoantšo sa 4a, leqephe la 8). Kopanya tamper switch wiring ho kena ho Access Control Panel kapa sesebelisoa se nepahetseng sa tlaleho se Lethathameng la UL. Ho kenya tshebetsong letshwao la alamo bula lemati la kampere.

Wiring:
Sebelisa 18 AWG kapa ho feta bakeng sa matla a tlasetaglikhokahano tsa motlakase.
Hlokomela: Hlokomela ho boloka li-circuits tse lekanyelitsoeng matla li arohane le lithapo tse se nang matla (120VAC, Battery).
Tlhokomelo:
Yuniti e lokela ho lekoa bonyane hang ka selemo bakeng sa ts'ebetso e nepahetseng ka tsela e latelang:
Khumo Voltage Teko: Tlas'a maemo a tloaelehileng a mojaro, molumo oa DC oa voltage lokela ho hlahlojwa bakeng sa vol e nepahetsengtage level eFlow104NB: 24VDC nominal rated @ 10A max.
Teko ea Betri: Tlas'a maemo a tloaelehileng a mojaro, hlahloba hore na betri e tjhajiloe ka botlalo, hlahloba molumo o boletsoengtage (24VDC @ 26.4) ka bobeli boteng ba betri le botong bo tšoailoeng [- BAT +] ho netefatsa hore ha ho na ho khaoha lithapong tsa ho hokela betri.
Hlokomela: Nako e phahameng ea ho tjhaja ha e tsoa ke 1.54A.
Hlokomela: Bophelo ba betri bo lebelletsoeng ke lilemo tse 5, leha ho le joalo ho khothaletsoa ho fetola libeteri ka lilemo tse 4 kapa ka tlase ha ho hlokahala.
Tlhahlobo ea LED:
eFlow104NB Phepelo ea Matla/Charger

Khubelu (DC) Botala (AC/AC1) Boemo ba Phepelo ea Matla
ON ON Boemo bo tloaelehileng ba ts'ebetso.
ON TLOA Tahlehelo ea AC. Betri e emeng haufi e fana ka matla.
TLOA ON Ha ho tlhahiso ea DC.
TLOA TLOA Tahlehelo ea AC. Betri e emeng kapa e sa sebetseng. Ha ho tlhahiso ea DC.

LINQ8ACM le LINQ8ACMCB Networked Access Power Controller

LED ON TLOA
LED 1- LED 8 (Khubelu) Li-relay li feletsoe ke matla. Li-relay tse hlahisoang li matlafalitsoe.
FACP Ho kenya FACP (boemo ba alamo). FACP e tloaelehileng (boemo boo e seng alamo).
Sephetho se Setala 1-8 12VDC –
Sephetho se Sefubelu 1-8 24VDC –
AC AC E hloleha AC Tloaelehile
BATHO Betri e hlolehile Betri e Tloaelehileng

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-02

Tlhokomeliso ea Trouble/Time Limited ea Libetri tse Emeng:
Bakeng sa ho latela ULC S318-96, potoloho ea Temoso ea Time Limited e tlameha ho hokeloa bakeng sa phatlalatso ea lehae kapa e hole ka Amber kapa Red LED ho bonts'a Mathata a DC (betri e tlase, tahlehelo ea betri kapa ha 95% ea betri e emeng e felile. fokotsehile). Hokela potoloho ho likhokahano tsa relay ea Batt Fail ho kenyelletso e nepahetseng ea UL Listed Burglar Alarm kapa Access Control Panel. Palo e latelang e bontša potoloho e hlokahalang bakeng sa phatlalatso ea sebaka seo.

Boitsebahatso Terminal:
eFlow104NB Phepelo ea Matla/Charger

Theminale/Legend Tlhaloso
A – PWR1 + Feme e hokahantsoeng le eFlow104NB.
B – PWR2 + Khetho ea bobeli ea phepelo ea motlakase ea DC.
C Leseli la LED Sephetho sa motho ka mong voltagle li-LED. 12VDC (Tala) kapa 24VDC (Khubelu).
D Output Jumper Sephetho sa motho ka mong voltage khetha jumper (fektheri e khethiloeng bakeng sa tlhahiso ea 24VDC).
E TLHOKOMELISO - Tloaelehileng Negative [–] polaka bakeng sa likhokahanyo tsa likharafu.
 

F

 Sehlahisoa 1 ka

Sephetho sa 8

NO, C, NC, COM

  

Liphetho tse robeli (8) tse ka khethoang ka boikemelo tse laoloang [Fail-Safe (NC) kapa Fail-Secure (NO)].
G - F, + F FACP Signaling Circuit Input terminals. Sehlopha sa 2 se na le matla a fokolang.
H -R, + R FACP Signaling Circuit Return terminals. Sehlopha sa 2 se na le matla a fokolang.
I GND, EOL EOL E hlokometseng liteishene tsa ho Kena tsa FACP bakeng sa ts'ebetso ea polarity ea ho khutlisa FACP. Sehlopha sa 2 se na le matla a fokolang.
J GND, RST FACP segokanyimmediamentsi sa sebolokigolo latching kapa e seng latching. HA HO se kentsoeng se ommeng. Sehlopha sa 2 se na le matla a fokolang. E tla khutsufatsoa bakeng sa sebopeho sa FACP se sa ts'oanelang kapa Latch FACP reset.
K C, NC Phatlalatso ea FACP Dry NC rated 1A/28VDC @ 0.6 Power Factor. Sehlopha sa 2 se na le matla a fokolang. Ka EOL JMP e tiile, e tla fana ka khanyetso ea 10k maemong a tloaelehileng.
L + PS1 - Feme e hoketsoeng ho litheminale tsa [+ BAT –] tsa phepelo ea motlakase ea eFlow104NB.
M + BAT - Khokahano ho libeteri tse emeng.
N + PS2 - Khokelo ho litheminale tsa [+ BAT -] tsa phepelo ea motlakase ea DC ea bobeli.
O + BAT - Khokahano ho betri(ies) e emeng bakeng sa phepelo ea motlakase ea DC ea bobeli.
P + INP1 - ka

+ INP8 -

 Tse robeli (8) tse laoloang ka boikemelo Normally Open (NO), Ka tloaelo Ho Koetsoe (NC), Open Collector Sink kapa Wet Input Triggers.
Q Tamper Tamper Fetola Input.
R AC / NC, C Hokela lisebelisoa tse nepahetseng tsa tsebiso ho li-terminal ho tlaleha hore AC e hlolehile.
S BAT / NC, C Hokela lisebelisoa tse nepahetseng tsa tsebiso ho litheminale ho tlaleha ho hloleha ha betri.
T   E boloketsoe tšebeliso ea nako e tlang.
U Sehokedi sa 8-Pin Bakeng sa ho hokela VR6 kapa Tango1B.
V USB Khokahano ea laptop e nolofalletsa LINQ8ACM(CB) ho seta le lenaneo la pele.
W RJ45 Ethernet: Khokahano ea LAN kapa ea laptop e thusa LINQ8ACM(CB) lenaneo le ho lekola maemo.
X PWR1+, PWR2+ Li-plug [+] tse ntle bakeng sa lihokelo tsa likharafu.
Y Sehokedi sa 2-Pin Khokelo ho litheminale tsa [AC Fail] phepelong ea motlakase.
Z EOL Jumper E sebetsa ka 10k Ohm End-of-Line resistor.

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-04

Boitsebahatso Terminal:
LINQ8ACM le LINQ8ACMCB Networked Access Power Controller

Terminal Taba Mosebetsi/Tlhaloso
L, N Hokela 120VAC 60Hz ho li-terminals tsena: L ho ea ho chesa, N ho se nke lehlakore (e se nang matla a fokolang)

(Setšoantšo sa 2a, leqephe la 6).
– DC + 24VDC nominal @ 10A tlhahiso e tsoelang pele (sehlahisoa se se nang matla a fokolang) (Setšoantšo sa 2h, leqephe la 6).
Hlahisa EOL e Laolehileng Sebopeho sa Alarm ea Mollo se kenya letsoho ho tsoa ho nako e khuts'oane kapa FACP. Lisebelisoa tsa trigger hangata li ka buloa, hangata li koaloa ho tsoa ho seketsoana sa phallo ea FACP (ho kenya matla a fokolang) (Setšoantšo sa 2d, leqephe la 6).
CHE, GND RESET Khokahano ea FACP kapa e sa thekeseleng (e nang le matla a fokolang) (Setšoantšo sa 2e, leqephe la 6).
+ AUX - Motlatsi oa Sehlopha sa 2 se hlahisoang ke matla a lekanyelitsoeng ke @ 1A (un switched) (Setšoantšo sa 2f, leqephe la 6).
AC Fail NC, C, NO E bontsha tahlehelo ya matla a AC, mohlala, hokela sesebedisweng se utlwahalang kapa phanele ya alamo. Relay hangata e matlafatsoa ha matla a AC a le teng.

Tlhaloso ea mabitso 1A @ 30VDC (matla a fokolang) (Setšoantšo sa 2b, leqephe la 6).
 

Bat Fail NC, C, NO

 E supa boemo ba betri e tlase, mohlala, hokela ho phanele ea alamo. Relay hangata e matlafatsoa ha matla a DC a le teng. Boemo ba ho ikopanya le 1A @ 30VDC.

Betri e tlositsoeng e tlalehoa nakong ea metsotso e 5.

Khokahano ea betri e tlalehiloe nakong ea motsotso o le mong (motlakase o lekanyelitsoe) (Setšoantšo sa 2b, leqephe la 6).
– BAT + Feme e hokahantsoeng le LINQ8ACM(CB).

Tefo e phahameng ea hajoale ke 1.54A (ha e na moeli) (Setšoantšo sa 2g, leqephe la 6).

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-05

DC Output ho lisebelisoa
                                                                          Tlhaloso: eFlow104NKA8QM - matla a se nang moeli, eFlow104NKA8DQM - matla a fokolang)

Ka boikhethelo Battery e Emang ka Bohato e Hlahang bakeng sa Lits'ebetso tsa UL294 Hlokomela: 12V libeteri tse hlokahalang bakeng sa ho kenya ULC-S319.

Ka boikhethelo Battery e Emang ka Bohato e Hlahang bakeng sa Lits'ebetso tsa UL294 Hlokomela: 12V libeteri tse hlokahalang bakeng sa ho kenya ULC-S319.

TLHOKOMELISO: Sebelisa libeteri tse emeng tse peli (2) 12VDC. Boloka lithapo tse lekanyelitsoeng matla li arohane le tse se nang matla. Sebelisa sebaka sa bonyane sa 0.25”. 12AH Libetri tse ka chachang hape ke libeteri tse kholo ka ho fetisisa tse ka kenang ka har'a sebaka sena se kampetsoeng. Sebaka sa betri sa kantle se thathamisitsoeng ka UL se tlameha ho sebelisoa ha ho sebelisoa libeteri tsa 40AH kapa 65AH.

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-05

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-07

Tlhophiso ea Marang-rang:
Ka kopo etsa bonnete ba hore u etela altronix.com bakeng sa firmware ea morao-rao le litaelo tsa ho kenya.

Lenaneo la Marang-rang ka Khokahano ea USB ea Altronix Dashboard:
Khokahano ea USB ho LINQ8ACM(CB) e sebelisoa ho seta liparamente tsa marang-rang. Ha o hoketsoe ho PC ka thapo ea USB LINQ8ACM(CB) e tla fumana matla ho tsoa koung ea USB e lumellang mananeo a marang-rang a LINQ8ACM(CB) pele a hokeloa phepelong ea motlakase.

  1. Kenya software e fanoeng le LINQ8ACM(CB) ho PC e sebelisetsoang ho etsa mananeo. HLOKOMELA: Software ena e lokela ho kengoa lik'homphieutheng tsohle tse tla ba le phihlello ho LINQ8ACM(CB).
  2. Hokela thapo ea USB e fanoeng koung ea USB ho LINQ8ACM(CB) le komporong.
  3. Tobetsa habeli aekhoneng ea Dashboard ho komporo ea komporo ebe u bula Dashboard. Kenya Lebitso la Mosebelisi: admin le Password: admin ho fihlella dashboard.
  4. Tobetsa konopo e tšoailoeng USB Network Setup ka lehlakoreng le ka holimo la dashboard. Sena se tla bula skrine ea USB Network Setup. Skrineng sena Aterese ea MAC ea mojule oa LINQ8ACM(CB) e tla fumanoa hammoho le Litlhophiso tsa Marang-rang.

Litlhophiso tsa Marang-rang:
Sebakeng sa Mokhoa oa Aterese ea IP khetha mokhoa oo Aterese ea IP bakeng sa LINQ8ACM(CB) e tla fumanoa ka eona: "STATIC" kapa "DHCP", ebe u latela mehato e loketseng (ikopanye le molaoli oa marang-rang ho fumana hore na ke mokhoa ofe o tla sebelisoa) .
E tsitsitseng:

  1. Aterese ea IP: Kenya aterese ea IP e abetsoeng LINQ8ACM(CB) ke mookameli oa marang-rang.
  2. Subnet Mask: Kenya Subnet ea marang-rang.
  3. Gateway: Kena heke ea TCP/IP ea sebaka sa phihlello sa marang-rang (router) e sebelisoang.
    HLOKOMELA: Tlhophiso ea heke ea hlokahala ho fumana mangolo-tsoibila hantle ho tsoa sesebelisoa.
  4. Inbound Port (HTTP): Kenya nomoro ea boema-kepe e fuoeng mojule oa LINQ8ACM(CB) ke molaoli oa marang-rang ho lumella ho fihlella le ho beha leihlo.
  5. Tobetsa konopo e ngotsoeng Submit Network Settings. Lebokose la puisano le tla bontša "Litlhophiso tse ncha tsa marang-rang li tla qala ho sebetsa ka mor'a hore seva se tsosolosoe". Tobetsa OK.
DHCP:
  1. Ka mor'a ho khetha DHCP tšimong ea Mokhoa oa Aterese ea IP, tobetsa konopo e ngotsoeng Submit Network Settings. Lebokose la puisano le tla bontša "Litlhophiso tse ncha tsa marang-rang li tla qala ho sebetsa ka mor'a hore seva se tsosolosoe". Tobetsa OK. E latelang, tobetsa konopo e ngotsoeng Reboot Server. Kamora ho qala bocha LINQ8ACM(CB) e tla hlophisoa ka mokhoa oa DHCP. Aterese ea IP e tla abeloa ke router ha LINQ8ACM(CB) e hokahane le marang-rang. Ho kgothaletswa ho boloka Aterese ya IP e abetsweng ho netefatsa phihlello e tswelang pele (sheba molaodi wa marang-rang).
  2. Subnet Mask: Ha o sebetsa ho DHCP, router e tla abela litekanyetso tsa mask a subnet.
  3. Gateway: Kena heke ea TCP/IP ea sebaka sa phihlello sa marang-rang (router) e sebelisoang.
  4. Boema-kepe ba HTTP: Kenya nomoro ea boema-kepe ea HTTP e fuoeng mojule oa LINQ8ACM(CB) ke molaoli oa marang-rang ho lumella ho fihlella le ho beha leihlo. Litlhophiso tsa kamehla tsa boema-kepe ke 80. HTTP ha ea ngolisoa ebile ha ea sireletseha. Leha HTTP e ka sebelisoa bakeng sa phihlello e hole, e khothaletsoa haholo hore e sebelisoe le likhokahano tsa LAN.

Secure Network Setup (HTTPS):
E le ho theha HTTPS bakeng sa Khokahano e Sireletsehileng ea Marang-rang, ho tlameha ho sebelisoe Setifikeiti le Senotlolo se sebetsang. Litifikeiti le Senotlolo li tlameha ho ba ka sebopeho sa ".PEM". Litifikeiti tsa ho Itiisa li lokela ho sebelisoa feela molemong oa tlhahlobo kaha ha ho na netefatso ea 'nete e etsoang. Ka mokhoa oa ho Ikemela, khokahano e ntse e tla bolela hore ha e sireletsehe.

Mokhoa oa ho kenya Setifikeiti le Senotlolo sa ho Seta HTTPS:

  1. Bula Tab e Ngotsoeng Tšireletso.
  2. Khetha Tab e Ngotsoeng Email/SSL.
  3. Tsamaisetsa tlase tlasa Litlhophiso tsa SSL.
  4. Tobetsa Khetha Setifikeiti.
  5. Batla 'me u khethe Setifikeiti se nepahetseng seo u ka se kenyang ho tsoa ho seva.
  6. Tobetsa Kgetha Senotlolo.
  7. Sheba ebe u khetha Senotlolo se nepahetseng seo u ka se kenyang ho tsoa ho seva.
  8. Tobetsa Romela Files.

Hang ha Setifikeiti le Senotlolo li kentsoe ka katleho u ka tsoela pele ka ho theha HTTPS ho Litlhophiso tsa Marang-rang.

  • Boema-kepe ba HTTPS: Kenya nomoro ea boema-kepe ea HTTPS e fuoeng mojule oa LINQ8ACM(CB) ke molaoli oa marang-rang ho lumella ho fihlella le ho beha leihlo. Litlhophiso tsa kamehla tsa boema-kepe ke 443. Kaha e ngotsoe ka mokhoa o patiloeng ebile e bolokehile haholoanyane, HTTPS e khothaletsoa haholo bakeng sa phihlello e hole.
  • Tobetsa konopo e ngotsoeng Submit Network Settings. Lebokose la puisano le tla bontša "Litlhophiso tse ncha tsa marang-rang li tla qala ho sebetsa ka mor'a hore seva se tsosolosoe". Tobetsa OK.

Ho fihlella LINQ8ACM(CB) ka Altronix Dashboard, sheba Buka ea ho Kenyeletsoa le Lenaneo la Dashboard e fumanehang ho flash drive e fanoeng.
Lenaneo le Via Browser:
Ha o sa sebelise khokahano ea USB ea Altronix Dashboard bakeng sa ho seta Netweke ea pele, LINQ8ACM(CB) e hloka ho hokeloa ho phepelo efe kapa efe ea motlakase ea DC kapa phepelo ea motlakase ea eFlow e behoang leihlo pele ho lenaneo. Sheba Litaelo tsa Tlhophiso tsa LINQ8ACM(CB) leqepheng la 3 la bukana ena.

Litlhophiso tsa kamehla tsa feme:

  • IP Aterese: 192.168.168.168
  • Lebitso la mosebelisi: admin
  • Password: admin
  1. Beha aterese ea IP e sa fetoheng bakeng sa laptop e tla sebelisoa bakeng sa ho etsa mananeo ho aterese ea IP ea marang-rang joalo ka LINQ8ACM(CB), ke hore 192.168.168.200 (aterese ea kamehla ea LINQ8ACM(CB) ke 192.168.168.168).
  2. Hokela pheletsong e 'ngoe ea thapo ea marang-rang ho jack ea marang-rang ho LINQ8ACM(CB) le e' ngoe ho khokahanyo ea marang-rang ea laptop.
  3. Bula sebatli khomphuteng 'me u kenye "192.168.168.168" kahare ea aterese. Lebokose la lipuisano lea Hlokahala le tla hlaha le kopa lebitso la mosebelisi le password.
    Kenya litekanyetso tsa kamehla mona. Tobetsa konopo e ngotsoeng Log In.
  4. Leqephe la boemo la LINQ8ACM(CB) le tla hlaha. Leqephe lena le bonts'a boemo ba nako ea 'nete le bophelo bo botle ba phepelo e' ngoe le e 'ngoe ea motlakase e hoketsoeng ho LINQ8ACM(CB).Ho kenya liparamente tse ncha tsa marang-rang, ea ho Network Setup tlasa karolo ea LINQ8ACM(CB) Configuration ea bukana ena.

Tlhophiso ea LINQ8ACM(CB):
Ho beha ID ea Sebaka, Nako le Letsatsi:
Sebaka sa ID se sebelisetsoa ho khetholla sebaka le tlhaloso ea sesebelisoa se shebiloeng.

  1. Tobetsa tab ya Boemo ho fihlella leqephe la boemo.
  2. Tobetsa ho Setsi sa ID ka holimo ka ho le letšehali, lebokose la puisano le tla buleha.
  3. Kenya sebaka le tlhaloso ea sesebediswa leihlo.
  4. Tobetsa romela.

Nako le Letsatsi li tlameha ho behoa molemong oa ho nepahala stamp lintlha tsa tsamaiso le litlhokomeliso tsa imeile.

  1. Tobetsa tab ya Boemo ho fihlella leqephe la boemo.
  2. Tobetsa nako le letsatsi ka holimo ka ho le letšehali, lebokose la puisano le tla buleha.
  3. Tobetsa ho "SYNC DATE LE NAKO".
  • Tlhophiso ea Hardware:
    Tobetsa tabeng ea Litlhophiso ho bula skrine ea Hardware Setup. Kenya / Output Setapo:
    1. Tobetsa ho tab ea INPUT / OUTPUT holimo skrineng.
    2. Output ID: Kenya lebitso le hlalosang bakeng sa sesebelisoa se amanang le tlhahiso e amanang.
    3. Taolo ea Lintho: u sebelisa menyu ea ho hula, khetha hore na sephetho se tla laoloa ka ho kenya taolo ea phihlello ho li-terminals tsa trigger kapa software e laoloang.
      1. Taolo ea ho kenya: liphetho li laoloa ka Trigger Input,
      2. Tsamaiso ea Tsamaiso: lihlahisoa li laoloa ka letsoho ka software ea LINQ. Lintho tse hlahisoang li tla laoloa ka sesebelisoa se qaliloeng ke software.
    4. E qalile: Ho hlahloba kapa ho hlakola lebokose le amanang le tlhahiso ho tla fetola tlhahiso ha konopo ea Submit e tobetse. Liphetho tse ngata li ka fetoloa ka nako e le 'ngoe.
      HLOKOMELA: Ts'ebetso ena haeba e sebelisoa ho Taolo ea Manual feela.
    5. Kenyelletso: tlhahiso e ka hlophisoa ho laola tlhahiso e le 'ngoe kapa lihlahisoa tse ngata.
      1. Single output control: u sebelisa lenane la ho hula la sephetho se tsamaellanang (ke hore, Input1 g Output1), khetha mofuta oa taolo ea phihlello NO E buloa kapa NC e koetsoe ka tloaelo.
      2.  Taolo ea lintho tse ngata: ka ho sebedisa lenane la ho hulela fatshe la dipoelo tsohle tse lokelang ho laolwa (ke hore Input1 g Output1 g Output4 g Output7) kgetha mofuta wa keno ya taolo ya phihlello NO Ka tlwaelo e bulwa kapa NC e kwalwa ka tlwaelo. Liphetho tsohle tse khethiloeng li tla fetola boemo ha tlhahiso e qala.
    6. Mofuta oa tlhahiso: u sebelisa konopo ea ho hula, khetha hore na sehlahisoa se tla sebelisoa joang: Fail-Safe (lisebelisoa tse hlokang ho notleloa), Fail-Sireletsehile (sesebelisoa se hloka matla a ho lokolla), kapa Thuso (lisebelisoa tse hlokang matla a sa fetoheng).
    7. FACP: u sebelisa tab ea ho hula, khetha hore na tlhahiso e tla itšoara joang ha alamo ea mollo e tlosoa: Ha e sebetse (sehlahisoa se tla lula se le teng), se sa ts'oarehe (se hlahisoang se tla lokolloa ha FACP e tsosolosoa), Latching (sehlahisoa se tla lula se le teng). ha FACP e seta bocha 'me e lula e ts'oaroa ho fihlela e lokolloa ka letsoho ho li-terminals tsa reset).
    8. Boloka Battery: khetha hore na tlhahiso e tla tšehetsoa ha ho ka etsahala hore motlakase o hlolehe. Tlosa lebokose le amanang le lona ho tima betri bakeng sa tlhahiso eo.
    9. Holimo/ Tlas'a Hona Joale: Kenya meeli ea hona joale ea Holimo le e Tlase bakeng sa tlhahiso e amanang. Haeba e 'ngoe ea meeli ena e fetisitsoe molaetsa oa tlhokomeliso le/kapa tsebiso ea lengolo-tsoibila e tla hlahisoa.
    10. Over/Under Voltage: Kena ka bobeli High le Tlase voltage meeli bakeng sa tlhahiso e amanang. Haeba e 'ngoe ea meeli ena e fetisitsoe molaetsa oa tlhokomeliso le/kapa tsebiso ea lengolo-tsoibila e tla hlahisoa.
    11. Tobetsa konopo e ngotsoeng Submit ho boloka litlhophiso.

Litlhophiso tsa mocheso:

  1. Tobetsa tabeng ea Temperature holimo skrineng.
  2. Kenya moeli oa mocheso o phahameng ka Celsius.
  3. Tobetsa konopo e ngotsoeng Submit ho boloka litlhophiso.

Letsatsi(ma)tshebeletso ea Betri:
Haeba libeteri li sa sebelisoe, hlakola lebokose le tlas'a Present ho tima betri ea leihlo.

  1. Tobetsa ho "Libetri" tab e ka holimo ho skrine.
  2. Kenya letsatsi leo libeteri li kentsoeng ka tlas'a Letsatsi la Kemiso bakeng sa phepelo e 'ngoe le e 'ngoe e hokeletsoeng.
  3. Kenya letsatsi la ts'ebeletso ea betri tlasa Letsatsi la Ts'ebeletso bakeng sa phepelo e 'ngoe le e 'ngoe e hoketsoeng.
    HLOKOMELA: Libetri li lokela ho hlahlojoa bonyane hang ka selemo. Leha ho lebeletsoe hore bophelo ba betri ke lilemo tse hlano (5) ho khothaletsoa ho khutlisa libeteri lilemo tse ling le tse ling tse nne (4).
  4. Tobetsa konopo e ngotsoeng Submit ho boloka litlhophiso

Litlhophiso tsa Phepelo ea Matla:
Haeba ho sebelisoa phepelo ea motlakase e le 'ngoe feela (1) hlakola lebokose le tlas'a Present haufi le phepelo ea motlakase e sa sebelisoeng ho tima ho beha leihlo.

  1. Tobetsa ho "Power Supplies tab" e kaholimo ho skrine.
  2. Over/Under Voltage: Kenya bobeli ba Holimo le Tlasetage meeli bakeng sa ho kenya letsoho. Haeba e 'ngoe ea meeli ena e fetisitsoe molaetsa oa tlhokomeliso le/kapa tsebiso ea lengolo-tsoibila e tla hlahisoa.
  3. Holimo / Tlas'a Hona Joale: Kenya meeli ea hona joale e Phahameng le e Tlase bakeng sa kenyeletso e amanang. Haeba e 'ngoe ea meeli ena e fetisitsoe molaetsa oa tlhokomeliso le/kapa tsebiso ea lengolo-tsoibila e tla hlahisoa.
  4. Tobetsa konopo e ngotsoeng Submit ho boloka litlhophiso

Phetoho ea Hona Joale:
Nakong ea tlhophiso ea pele, liphetho tsohle li hloka ho lekanyetsoa ho netefatsa hore na ho baloa ho nepahetseng hona joale.

  1. Tobetsa tabeng ea Calibration holimo skrineng.
  2. Ha mejaro eohle e khaotsoe, tlanya ho tab e ngotsoeng Calibrate All Zero Offset Currents ho beha maqhubu ohle ho zero.
  3. Ho hokela tlhahiso e 'ngoe le e 'ngoe ka nako, lekanya toro ea hona joale 'me u kenye boleng bona bakeng sa tlhahiso ena tlasa Actual.
  4. Tobetsa konopo e ngotsoeng Calibrate Gain ho boloka litlhophiso.
  5. Pheta mehato ea 3 & 4 bakeng sa liphetho tsohle tse setseng.

Ha o kenya kapa o kenya sesebelisoa se secha, tlhahiso e hloka ho lekanyetsoa bocha.

  1. Tobetsa tabeng ea Calibration holimo skrineng.
  2. Ha mojaro o khaotsoe ho tsoa, ​​tobetsa ho tab e ngotsoeng Calibrate Offset hore tlhahiso e behe ea hona joale ho zero.
  3. Hokela sephetho, lekanya palo ea hajoale 'me u kenye boleng bona tlasa 'Nete.
  4. Tobetsa konopo e ngotsoeng Calibrate Gain ho boloka litlhophiso.
  5. Pheta mehato ea 3 & 4 bakeng sa liphetho tsohle tse setseng.

B. Tlhophiso ea Nako:
Tobetsa ho "Timers tab" ho fihlella skrineng sa ho seta nako.

  1. Tobetsa ho Add New Timer bar.
  2. Leibole ea Nako: Kenya lebitso le hlalosang bakeng sa ts'ebetso ea nako.
  3. Letsatsi la ho Qala la Nako: Kenya letsatsi leo tšebetso ea nako e tla qala ka lona (ke hore, 10/09/2019).
  4. Nako ea nako: U sebelisa menyetla ea ho hula, khetha nako eo nako e tla sebetsa ka eona.
  5. Nako ea ho Qala Nako: kenya nako eo ketsahalo ea nako e tla qala.
  6. Liketso tsa Nako: Khetha mosebetsi bakeng sa tlhahiso e 'ngoe le e' ngoe e tla etsahala nakong ea ketsahalo ea nako.
  7. Tobetsa konopo e ngotsoeng Submit ho boloka litlhophiso. Ho eketsa liketsahalo tse ling tsa nako, pheta mehato ea 1-7.

C. Tlhophiso ea Marang-rang:

E tsitsitseng:

  1. Aterese ea IP: Kenya aterese ea IP e abetsoeng LINQ8ACM(CB) ke mookameli oa marang-rang.
  2. Subnet Mask: Kenya Subnet ea marang-rang.
  3. Gateway: Kena heke ea TCP/IP ea sebaka sa phihlello sa marang-rang (router) e sebelisoang. Tlhophiso ea heke ea hlokahala ho fumana mangolo-tsoibila hantle ho tsoa sesebelisoa.
  4. Boema-kepe ba HTTP: Kenya nomoro ea boema-kepe ea HTTP e fuoeng mojule oa LINQ8ACM(CB) ke molaoli oa marang-rang ho lumella ho fihlella le ho beha leihlo. Litlhophiso tsa kamehla tsa boema-kepe ke 80. HTTP ha ea ngolisoa ebile ha ea sireletseha. Leha HTTP e ka sebelisoa bakeng sa phihlello e hole, e khothaletsoa haholo hore e sebelisoe le likhokahano tsa LAN.
  5. Boema-kepe ba HTTPS: Kenya nomoro ea boema-kepe ea HTTPS e fuoeng mojule oa LINQ8ACM(CB) ke molaoli oa marang-rang ho lumella ho fihlella le ho beha leihlo. Litlhophiso tsa kamehla tsa boema-kepe ke 443. Kaha e ngotsoe ka mokhoa o patiloeng ebile e bolokehile haholoanyane, HTTPS e khothaletsoa haholo bakeng sa phihlello e hole. Ha HTTPS e sebelisoa ho khothaletsoa ho hlakola lebokose le haufi le HTTP ho thibela tšebeliso ea eona.
  6. Ha likarolo tsohle li phethiloe, tobetsa konopo e ngotsoeng Submit.
  7. Tobetsa konopo e ngotsoeng Reboot ho boloka litlhophiso.

DHCP:

  1. Kamora ho khetha DHCP tšimong ea Method, tobetsa konopo e ngotsoeng Submit. E latelang, tobetsa konopo e ngotsoeng Reboot ho boloka litlhophiso. Kamora ho qala bocha LINQ8ACM(CB) e tla hlophisoa ka mokhoa oa DHCP. Aterese ea IP e tla abeloa ke router ha LINQ8ACM(CB) e hokahane le marang-rang. Sheba molaoli oa marang-rang bakeng sa liparamente tsa DHCP.
  2. Subnet Mask: Ha o sebetsa ho DHCP router e tla abela boleng ba mask a subnet.
  3. Khoro: TCP/IP monyako oa sebaka sa phihlello sa marang-rang (routara) e sebelisoang e tla hlahisoa.eFlow104NKA8DQM Tlhophiso Tataiso
  4. d. HTTP Port: Kenya nomoro ea boema-kepe ea HTTP e fuoeng mojule oa Linq8ACM ke molaoli oa marang-rang ho lumella ho fihlella le ho beha leihlo. Litlhophiso tsa kamehla tsa boema-kepe ke 80. HTTP ha ea ngolisoa ebile ha ea sireletseha. Leha HTTP e ka sebelisoa bakeng sa phihlello e hole, e khothaletsoa haholo hore e sebelisoe le likhokahano tsa LAN.
  5. Boema-kepe ba HTTPS: Kenya nomoro ea boema-kepe ea HTTPS e fuoeng mojule oa LINQ8ACM(CB) ke molaoli oa marang-rang ho lumella ho fihlella le ho beha leihlo. Litlhophiso tsa kamehla tsa boema-kepe ke 443. Kaha e ngotsoe ka mokhoa o patiloeng ebile e bolokehile haholoanyane, HTTPS e khothaletsoa haholo bakeng sa phihlello e hole.
  6. Ha likarolo tsohle tsa tlatsetso li phethiloe, tobetsa konopo e ngotsoeng Submit.
  7. Tobetsa konopo e ngotsoeng Reboot ho boloka litlhophiso.

D. Litlhophiso tsa Cloud:
Tšehetso ea leru ea LINQ8ACM(CB) e emisitsoe ka ho sa feleng. Ha tšehetso ea leru e lumelletsoe, LINQ8ACM(CB) e tla sebelisa tšehetso ea leru ho fana ka litsebiso tsa lengolo-tsoibila le ho fana ka lintlafatso ha li le teng. Tšoaea lebokose le haufi le Numella ho lumella litemoso tsa lengolo-tsoibila tsa ketsahalo ka tšehetso ea leru. Litlhophiso tse tsoetseng pele: Sephethephethe sa marang-rang sa Cloud se ka fetisetsoa ho li-server tsa lehae ha ho hlokahala.

  1. Kenya aterese ea IP ea seva ea leru sebakeng sa Aterese ea IP.
  2. Kenya pro ID sebakeng sa Port.
  3. Sheba lebokoseng le haufi le Enable.
  4. Tobetsa konopo e ngotsoeng Submit ho boloka setting.

Ha o sebelisa seva sa lehae mme SSL/TLS e sebetsa, setifikeiti se secha se tla hloka ho kenngoa.

Kemiso ea Setifikeiti:

  1. Tobetsa tabeng ea Setifikeiti ka holimo ho skrine.
  2. Tobetsa ho Khetha Setifikeiti File le ho fumana setifikeiti se secha.
  3. Kenya setifikeiti.
  4. Tobetsa konopo e ngotsoeng Submit to save the file.

E. Tlhophiso ea lengolo-tsoibila:

  1. Tobetsa tab ya Imeile ho fihlella skrineng sa di-setting tsa imeile.
  2. Tobetsa ho thebo ea Outgoing ho fihlella skrineng sa Litlhophiso tsa Imeile tse tsoang.
  3. Kenya liaterese tse tsoang ho tse hlano (5) tse tla fumana litemoso tsa lengolo-tsoibila.
  4. Hang ha li-imeile tsohle li kenyelitsoe, tobetsa konopo ea Submit ho boloka litlhophiso.

Teko ea lengolo-tsoibila:

  1. Tobetsa tabeng ea Teko ho fumana skrine ea Tlhahlobo ea Imeile.
  2. U sebelisa menu ea ho hula, khetha molaetsa oa teko o tla romelloa.
  3. Tobetsa konopo ea Submit hore u romelloe molaetsa oa teko.

F. Litlhophiso tsa Ts'ireletso ea Netweke:

  1. Tobetsa tab ya Tshireletso ho fihlella skrineng sa Litlhophiso tsa Ts'ireletso.
  2. Tobetsa tab e loketseng ka holimo ho skrine bakeng sa libaka tse lokelang ho hlophisoa.

Maano:
Khetha temoso ea ts'ireletso e tla hlahisoa ha u kena ka har'a sistimi ka ho sheba ho bonts'a le ho hlakola ho se hlahise molaetsa oa temoso.

Tlhophiso ea Setifikeiti sa Boithaopo:
Ho hlahisa Setifikeiti le Senotlolo sa SSL se ingoletseng:

  1. Naha: Litlhaku tse peli tse emelang naha eo mokhatlo o leng ho eona.
  2. Sebaka: Motse oo mokhatlo o leng ho oona.
  3. Mokhatlo: Lebitso la molao la mokhatlo. Sena ha sea lokela ho khutsufatsoa, ​​'me se tlameha ho kenyelletsa li-suffixes tse kang Inc., Corp, kapa LLC.
  4. Unit Name: Lebitso la sesebelisoa.
  5. Lebitso le Tloaelehileng: Lebitso la domain kapa aterese ea IP ea seva. Hangata sena se fanoa ke mookameli oa marang-rang.
  6. Aterese ea lengolo-tsoibila: Aterese ea lengolo-tsoibila e sebelisoang ho ikopanya le mokhatlo.
  7. Ka mor'a hore karolo eohle e phethoe, tobetsa konopo e ngotsoeng " Submit to save setting".

HLOKOMELA: Setifikeiti sa SSL se itekenetseng se tla hlahisoa ka lintlha tse fanoeng libakeng tsa "SSL Certificate Settings". Setifikeiti se tla sebetsa matsatsi a 500, le nako stamped le litlhophiso tsa nako tse teng mojuleng oa LINQ8ACM(CB). Letsatsi le nako li tlameha ho hokahanngoa le komporo ea moamoheli pele o hlahisa setifikeiti sa SSL.

Kemiso ea Setifikeiti:
Ho kenya Setifikeiti sa poraefete le Senotlolo.

  1. Tlas'a Setifikeiti se kentsoeng, tobetsa ho Khetha Setifikeiti File.
  2. Fumana setifikeiti se secha file.
  3. Kenya setifikeiti file.
  4. Tlas'a Key upload, tobetsa ho Khetha Key File.
  5. Fumana setifikeiti se secha file.
  6. Kenya Senotlolo file.
  7. Tobetsa konopo e ngotsoeng Submit file boloka litlhophiso

Litlhophiso tsa mosebelisi:
Ho na le maemo a 'maloa a ka sebelisoang a fumanehang.
Motsamaisi: E na le phihlello ea lits'ebetso tsohle.
Boemo/Peakanyo: E na le taolo ea ho tima/e tima 'me e ka reha thepa ea motlakase bocha. Netweke: Peakanyo ena ke ya balaodi ba IT.
Tlhokomelo: E na le monyetla oa ho fetola Litsebiso le taolo ea nako.
Ho theha Basebelisi:

  1. Tobetsa tab ya Users.
  2. Tobetsa ho Eketsa konopo ea mosebelisi e mocha Foromo e Ncha ea Mosebelisi e tla buleha.
  3. Kenya Lebitso la mosebedisi.
  4. Kenya phasewete e ikhethang tlasa Password e Ncha.
  5. Kenya phasewete hape tlasa Confirm Password.
  6. Khetha mofuta oa mosebelisi le litokelo tseo mosebelisi a nang le tsona: Bala/Ngola (a ka etsa liphetoho) kapa Bala Feela (view feela). Mosebelisi a ka hlophisoa joalo ka molaoli ka ho tobetsa ETSA ADMIN ka holimo ho konopo ea Romela.
  7. Tobetsa ho Submit ho boloka litlhophiso.
  8. Pheta se ka holimo ho eketsa basebelisi ba eketsehileng.

Litlhokomeliso le Litlhophiso tsa ho lieha ho tlaleha:
Litemoso li ka lumelloa ho romella tsebiso ea hore ketsahalo e etsahetse kapa e koetsoe ho iphapanyetsa ketsahalo eo le ho se romelle tsebiso. Ho thibela ketsahalo, hlakola lebokose la Numella le haufi le ketsahalo e tla tima. Ho bulela ketsahalo hape, sheba lebokose le haufi le ketsahalo.
Liketsahalo li ka hlophisoa hore li liehe pele li tlaleha.
Ho seta tieho ea tlaleho, kenya nako ea tieho kholomong tlasa Delay Report bakeng sa ketsahalo e amanang. Nako ea ho lieha e behiloe ka metsotsoana. Liketsahalo tsohle li reriloe esale pele bakeng sa metsotsoana e 2. Hang ha likarolo tsohle li phethiloe, tobetsa konopo e ngotsoeng Submit ho boloka litlhophiso tsa ketsahalo. Pheta hore liketsahalo tse ling kaofela li hlophisoe.

Litšoantšo tsa Hook-Up:

Setšoantšo sa 6 - Daisy-chaining unit e le 'ngoe kapa ho feta LINQ8ACM(CB). EOL Jumper [EOL JMP] e lokela ho kenngoa boemong ba EOL. E sa Lateng.

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-08

Setšoantšo sa 7 - Daisy-chaining unit e le 'ngoe kapa ho feta LINQ8ACM(CB). EOL Jumper [EOL JMP] e lokela ho kenngoa boemong ba EOL. Latching Single Reset.

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-09

Setšoantšo sa 8 - Daisy e kopanya yuniti e le 'ngoe kapa ho feta LINQ8ACM(CB). EOL Jumper [EOL JMP] e lokela ho kenngoa boemong ba EOL. Latching Individual Reset.

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-10

Litšoantšo tsa Hook-Up:

Setšoantšo sa 9 - Polarity reversal input ho tloha FACP signaling circuit output (polarity e hlalosoa ka boemo ba alamo). E sa Lateng.

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-11

Setšoantšo sa 10 - Polarity reversal input ho tloha FACP signaling circuit output (polarity e hlalosoa ka boemo ba alamo). Latching.

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-12

Setšoantšo sa 11 - Ka tloaelo ho Koetsoe ho kenya trigger (Non-Latching).

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-13

Setšoantšo sa 12 - Hangata ho koetsoe ho kenya letsoho(Latching).

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-14

Setšoantšo sa 13 - Ka tloaelo Open trigger input (Non-Latching).

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-15

Setšoantšo sa 14 - Hangata Open trigger input (Latching).

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-16

Mekhahlelo ea Kakaretso (BC400):
15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm)

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Output-Access-Power-Controllers-17

Altronix ha e ikarabelle bakeng sa liphoso leha e le life tsa typographical. 140 58th Street, Brooklyn, New York 11220 USA | mohala: 718-567-8181 | fekse: 718-567-9056websebaka: www.altelengx.com | lengolo-tsoibila: info@altronix.com | Tiisetso ea Bophelo Bohle IIeeFlow104NKA8DQM G30U

Litokomane / Lisebelisoa

Altronix eFlow104NKA8QM Series Lilaoli tsa Matla a Marang-rang a Marang-rang [pdf] Tlhophiso Tataiso
eFlow104NKA8QM Series Balaoli ba Matla a ho kena ka makhetlo a mabeli a marang-rang, eFlow104NKA8QM Series, li-networkable dual Output Access Power Controllers, Power Controllers.

Litšupiso

Related Posts

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *