Abubuwan da ke ciki boye
1 Altronix eFlow104NKA8QM Series Mai Rarraba Sautin Samar da Wutar Lantarki
1.1 DHCP:
2 Takardu / Albarkatu
2.1 Magana
3 Labarai masu alaka

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-01

Altronix eFlow104NKA8QM Series Mai Rarraba Sautin Samar da Wutar Lantarki

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-prodect-hoto

Saukewa: eFlow104NKA8QM
Fitar Dual Dual Networkable
Samun Masu Gudanar da Wuta
Model sun hada da:
eFlow104NKA8QM

  • 12VDC ko 5VDC har zuwa 6A da/ko 24VDC har zuwa 10A (240W jimlar ƙarfin) zaɓaɓɓu ta hanyar fitarwa.
  • Takwas (8) abubuwan da aka karewa na fuse mai shirye-shirye
  • Takwas (8) abubuwan da za a iya shigar da kayan aiki
  • Caja na ciki don rufaffiyar gubar acid ko nau'in batura

eFlow104NKA8DQM

  • 12VDC ko 5VDC har zuwa 6A da/ko 24VDC har zuwa 10A (240W jimlar ƙarfin) zaɓaɓɓu ta hanyar fitarwa.
  • Takwas (8) da za'a iya tsarawa aji 2 masu iyakacin ikon PTC masu kariya
  • Takwas (8) abubuwan da za a iya shigar da kayan aiki
  • Caja na ciki don rufaffiyar gubar acid ko nau'in batura

Jagoran Shigarwa

Rev. eFlow104NKA8Q-072720 Fiye da wutar lantarki kawai.TM Kamfanin Shigarwa: _______________ Wakilin Sabis. Suna: _________________________________ Adireshi: _________________________________________________ Waya #: __________________

Ƙarsheview:
Altronix eFlow104NKA8QM da eFlow104NKA8DQM suna rarrabawa da canza iko don samun damar tsarin sarrafawa da kayan haɗi. Suna juyar da shigarwar 120VAC 60Hz zuwa takwas (8) sarrafa kayan sarrafawa na 12VDC ko 24VDC masu zaman kansu. Zane-zanen shigarwa biyu na Mai sarrafa Wutar Lantarki yana ba da damar sarrafa wutar lantarki daga masana'anta guda biyu (2) da aka shigar da ƙananan ƙarancin wuta.tage 12 ko 24VDC Altronix samar da wutar lantarki zuwa takwas (8) fiusi mai sarrafa kansa (eFlow104NKA8QM) ko PTC (eFlow104NKA8DQM) abubuwan da aka kare. Za'a iya canza abubuwan da aka fitar da wutar lantarki zuwa busassun lambobi "C". Ana kunna fitarwa ta hanyar buɗaɗɗen mai tattarawa, yawanci buɗewa (NO), yawanci rufe (NC) shigar da busasshen faɗakarwa, ko jika fitarwa daga Tsarin Kulawa, Mai karanta Kati, faifan maɓalli, Maɓallin turawa, PIR, da sauransu eFlow104NKA8(D)QM za ta tura wutar lantarki zuwa nau'ikan na'urorin sarrafa kayan aiki iri-iri ciki har da Makullin Mag, Harshen Wutar Lantarki, Masu riƙe da Ƙofa na Magnetic, da dai sauransu. Abubuwan da aka fitar za su yi aiki a cikin Fail-Safe da/ko Fail-Secure yanayin. Fuskar FACP tana ba da damar Ƙaddamar Gaggawa, Kula da Ƙararrawa, ko ƙila a yi amfani da su don haifar da wasu na'urori masu taimako. Siffar cire haɗin ƙararrawar wuta ana iya zaɓa ɗaya ɗaya don kowane ko duka na takwas (8). Masu haɗin spade suna ba ku damar ikon sarkar daisy zuwa LINQ8ACM (CB) da yawa. Wannan fasalin yana ba ku damar rarraba wutar lantarki akan ƙarin abubuwan fitarwa don manyan tsarin. Gina-in LINQTM Cibiyar Gudanar da Wutar Lantarki yana sauƙaƙe kulawa, bayar da rahoto da sarrafa ikon / bincike.

Ƙayyadaddun bayanai:
Abubuwan shigarwa:
eFlow104NB:

  • 120VAC, 60Hz, 4.5A.

LINQ8ACM(CB):

  • Abubuwan shigar da abubuwa takwas (8)
    1. Yawan buɗewa (NO) abubuwan shigar (buƙaƙen lambobi).
    2. Abubuwan shigarwar da aka saba rufe (NC) (buƙaƙen lambobi).
    3. Bude abubuwan shigar da mai tarawa.
    4. Wet Input (5VDC - 24VDC) tare da 10K resistor
    5. Duk wani hade na sama.

Abubuwan da aka fitar:
Ƙarfi:

  • 12VDC ko 5VDC har zuwa 6A, 24VDC har zuwa 10A (240W jimlar iko).
  • Ƙarfin Ƙarfi 2 mai iyakataccen fitarwa mai iyaka @ 1A (wanda ba a haɗa shi ba).
  • Ƙarfafawatage kariya.

LINQ8ACM:

  • Fuse abubuwan da aka kare da aka ƙididdige @ 2.5A akan kowane fitarwa, mara iyaka. Jimlar fitarwa 6A max.

LINQ8ACMCB:

  • Abubuwan da aka kare na PTC wanda aka ƙididdige @ 2A akan kowace fitarwa, Class 2-iyakantacce. Jimlar fitarwa 6A max. Kada ku wuce daidaitattun ƙimar samar da wutar lantarki.
  • Takwas (8) abubuwan da za a iya sarrafawa masu zaman kansu ko takwas (8) abubuwan da ba su dace ba da Form "C" da aka sarrafa (duba ƙasa don ƙididdigewa):
    1. Rashin-Lafiya da/ko Ƙarfin-Tsarin abubuwan samar da wutar lantarki.
    2. Abubuwan wutar lantarki na taimako (ba a kunna ba).
    3. Duk wani hade na sama.
  •  Za'a iya saita abubuwan da aka fitar guda ɗaya zuwa matsayin KASHE don yin hidima (saitin jumper zuwa matsayi na tsakiya). Ba ya aiki ga busasshiyar tuntuɓar aikace-aikacen.
  • Ana iya zaɓar kowane ɗayan fiusi takwas (8) fuse/PTC da aka kiyaye wutar lantarki don bin ikon Input 1 ko Input 2. Output vol.tage na kowane fitarwa iri ɗaya ne da shigar voltage na shigar da aka zaɓa.
  • Damuwawar tiyata.

Ƙimar Fuse/PTC:
eFlow104NB:

  • An ƙididdige fis ɗin shigarwa 6.3A/250V. Fuskar baturi 15A/32V. LINQ8ACM:
  • Babban shigar da fiusi an ƙididdige 15A/32V. Ana ƙididdige fis ɗin fitarwa 3A/32V.

LINQ8ACMCB:

  • Babban shigarwar PTC an kimanta 9A. Ana ƙididdige fitowar PTC 2A.

Ajiyayyen baturi (eFlow104NB):

  • Caja da aka gina a ciki don rufaffiyar gubar acid ko nau'in batura na gel.
  • Matsakaicin caji na yanzu 1.54A.
  • Canja atomatik zuwa baturin jiran aiki lokacin da AC ta gaza. Canja wurin zuwa ƙarfin baturi yana nan take ba tare da katsewa ba.

Kulawa (eFlow104NB):

  • AC gaza kulawa (form "C" lambobin sadarwa).
  • gazawar baturi & kasancewar sa ido (form "C" lambobin sadarwa).
  • Ƙarfin wutar lantarki. Yana rufe tashoshin fitarwa na DC idan baturi voltage ya faɗi ƙasa 71-73% don raka'a 12V da 70-75% don raka'a 24V (dangane da wutar lantarki). Yana hana zurfafa fitar da baturi.

Kashe Haɗin Ƙararrawar Wuta: eFlow104NB:

  • Cire haɗin Ƙararrawar Wuta da ake kulawa (latching ko mara latching) 10K EOL resistor. Yana aiki akan fararwa na yau da kullun (NO) ko rufaffiyar (NC).

LINQ8ACM(CB):

  • Cire haɗin ƙararrawa na Wuta (latching ko rashin latching) ana iya zaɓin ɗaiɗaiku don kowane ko duka na takwas (8). Zaɓuɓɓukan shigar da ƙararrawar wuta:
    • Akan buɗe [NO] ko kuma rufe [NC] busasshen shigar da lamba. Shigar da juyar da polarity daga da'irar siginar FACP.
  • An ƙididdige shigarwar FACP WET 5-30VDC 7mA.
  • Shigar da FACP EOL yana buƙatar 10K ƙarshen resistor layi.
  • FACP fitarwa relay [NC]: Ko dai Dry 1A/28VDC, 0.6 Power Factor ko 10K juriya tare da [EOL JMP] m.

Manufofin gani: eFlow104NB:

  • Green AC LED:                   Yana nuna 120VAC yanzu.
  • Red DC LED:                      Yana nuna fitowar DC.
  • LINQ8ACM(CB):
  • Green AC LED:                   Yana nuna yanayin matsalar AC.
  • Green BAT LED:                Yana nuna yanayin matsalar baturi.
  • Green FACP LED:              Yana nuna cire haɗin FACP ya jawo.
  • Blue mai walƙiya
    LED bugun zuciya:                  Yana nuna haɗin cibiyar sadarwa.
  • Mutum
    FITA 1 - FITA8
    Red LEDs:                           Nuna abubuwan da aka jawo.
  • Mutum
    Voltage LEDs:                     Nuna 12VDC (Green) ko 24VDC (Ja). (duba shafi na 5 don LINQ8ACM(CB) LED Diagnostics).

Siffofin Shirye-shiryen (LINQ8ACM(CB)):

  • Takwas (8) abubuwan da za a iya aiwatarwa:
    • Rashin-aminci, kasa-aminci ko abubuwan taimako.
    • Ana sarrafa shigarwa ko sarrafawa da hannu ta software.
    • Babban (sama) da ƙasa (ƙasa) voltage da saka idanu na yanzu ta hanyar fitarwa.
    • Ana iya tsara abubuwan da yawa don kunna su ta hanyar shigarwa ɗaya.
    • Ajiyar baturi ta fitarwa.
  • Takwas (8) abubuwan da za a iya shigar da su na faɗakarwa:
    • Akan buɗe (NO).
    • Kullum rufe (NC).
    • Bude abubuwan shigar da mai tarawa.
    • Wet Input (5VDC - 24VDC) tare da 10k resistor.
    • Duk wani hade na sama.
  • ID na tashar tashar jiragen ruwa masu shirye-shirye.
  • Kula da shigarwar samar da wutar lantarki don voltage da daidaitattun iyakoki (high / low).
  • Shigarwa da fitarwa na daidaitawa na yanzu.
  • Abubuwan da aka tsara lokacin ƙidayar lokaci.
  • Matakan mai amfani masu shirye-shirye.
  • Kunna ko kashe faɗakarwa ta nau'in.
  • jinkirin rahoton faɗakarwa mai shirye-shirye/

Muhalli:

  • Yanayin aiki: 0ºC zuwa 49ºC na yanayi.
  • Humidity: 20 zuwa 85%, mara taurin kai.

Girman Rukunin (kimanin H x W x D): 15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm).
eFlow104NKA8DQM Jagoran Shigarwa

Ƙayyadaddun Takaddun Tsaye:

 

Baturi

 Burg. Aikace-aikace 4 hr. Tsaya tukuna/

15 min. Ƙararrawa

 Aikace-aikacen Wuta 24hr. Tsaya tukuna/

5 min. Ƙararrawa

 Ikon shiga

Aikace-aikace Tsayawa
7AH 0.4A/10A N/A Minti 5/10A
12AH 1A/10A 0.3A/10A Minti 15/10A
40AH 6A/10A 1.2A/10A Sama da Awa 2/10A
65AH 6A/10A 1.5A/10A Sama da Awa 4/10A

Umarnin Shigarwa:
Hanyoyin wayoyi za su kasance daidai da Lambar Wutar Lantarki ta Ƙasa/NFPA 70/NFPA 72/ANSI, Lambar Lantarki ta Kanada kuma tare da duk lambobin gida da hukumomi masu iko. An yi nufin samfurin don amfanin cikin gida kawai.

  1. Dutsen naúrar a wurin da ake so. Yi alama da ramuka a bango don yin layi tare da manyan maɓallan maɓalli guda biyu a cikin shingen. Shigar da manyan haɗe-haɗe biyu da sukurori a bango tare da ɗumbin kawunan suna fitowa. Sanya manyan rijiyoyin maɓalli na sama sama biyu na sama, matakin kuma amintattu. Alama matsayi na ƙananan ramuka biyu. Cire shingen. Hana ƙananan ramuka kuma shigar da masu ɗaure biyu. Sanya ramukan maɓalli na sama sama biyu na sama. Shigar da ƙananan sukurori biyu kuma tabbatar da ƙarfafa duk skru
    (Mai Girman Rukunin, shafi na 8). Amintaccen shinge ga ƙasan ƙasa.
  2. Tabbatar cewa duk masu tsalle-tsalle [OUT1] - [OUT8] an sanya su a cikin KASHE (tsakiya) matsayi (Fig. 1, shafi 4).

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-02

  1. Haɗa ikon AC da ba a canza ba (120VAC 60Hz) zuwa tashoshi masu alama [L, N] (Hoto 2a, shafi 6). Green “AC” LED akan allon samar da wutar lantarki zai kunna. Ana iya ganin wannan hasken ta hanyar ruwan tabarau na LED da ke kofar shingen. Yi amfani da 14 AWG ko mafi girma don duk haɗin wutar lantarki. Amintaccen koren waya yana kaiwa zuwa ƙasa. Ajiye wayoyi masu iyaka dabam dabam daga wayoyi marasa iyaka (Input 120VAC 60Hz, Wayoyin Baturi). Dole ne a samar da tazara mafi ƙarancin 0.25. HANKALI: Kar a taɓa sassan ƙarfe da aka fallasa. Kashe wutar da'irar reshe kafin shigarwa ko kayan aiki. Babu sassa masu amfani a ciki. Koma shigarwa da sabis zuwa ƙwararrun ma'aikatan sabis.
  2. Saita kowane fitarwa [OUT1] - [OUT8] zuwa hanyar wutar lantarki daga Shigarwar 1 ko 2 (Fig. 1, shafi 4).
    Lura: Auna fitarwa voltage kafin haɗa na'urori. Wannan yana taimakawa guje wa lalacewa mai yuwuwa.
  3. Kashe wuta kafin haɗa na'urori.
  4. Zaɓuɓɓukan fitarwa: eFlow104NKA8DQM zai samar da wutar lantarki har zuwa takwas (8) da aka canza tare da takwas (8) waɗanda ba a kunna wutar lantarki ba. Abubuwan Wutar Wuta da aka Canja: Haɗa madaidaicin shigarwar (-) na na'urar da ake kunna wuta zuwa tasha mai alama [COM].
  5. Don Rashin-Safe aiki haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wuta zuwa tashar da aka yiwa alama [NC].
  6. Don Ƙarfafa Amintaccen aiki haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wutar lantarki zuwa tasha mai alama [NO].
    Fitar wutar lantarki (ba a kunna):Haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wuta zuwa tashar da aka yiwa alama [C] da kuma mummunan (-) na na'urar da ake kunna wutar zuwa tasha mai alama [COM]. Ana iya amfani da fitarwa don samar da wuta ga masu karanta katin, maɓalli da sauransu.
  7. Kunna babban wuta bayan an haɗa duk na'urori.
  8. Zaɓuɓɓukan Ƙarfafa shigarwa (zaɓuɓɓukan shigar da shirye-shirye ta hanyar software na LINQ):
    Lura: Idan ba a yi amfani da cire haɗin Ƙararrawar Wuta ba, haɗa resistor 10k Ohm zuwa tashoshi masu alama [GND da EOL]. Shigarwa: Haɗa shigarwar busasshen shigar da busassun (NC/NO) zuwa tashoshi masu alama [+ INP1 -] zuwa [+ INP8 -]. Buɗe Shigar Mai Tarin Ruwa: Haɗa shigar da buɗaɗɗen shigar mai tarawa zuwa tasha mai alama [+ INP1 -] zuwa [+ INP8 -]. Jika (Voltage) Kanfigareshan shigarwa: A hankali lura da polarity, haɗa voltage shigar da wayoyi masu jawowa da kuma samar da resistor 10K zuwa tashoshi masu alamar [+ INP1 -] zuwa [+ INP8 -].
  9. Zaɓuɓɓukan Interface Ƙararrawa na Wuta (zaɓuɓɓukan mu'amalar ƙararrawar ƙararrawa ta shirin ta hanyar software na LINQ): Rufe [NC], yawanci buɗewa [NO] shigarwar ko shigar da jujjuyawar polarity daga da'irar siginar FACP zai haifar da zaɓin abubuwan da aka zaɓa. A al'ada
    Buɗe Shigarwa:
    Waya gudun ba da sanda na FACP ɗin ku da resistor 10K a layi daya akan tashoshi masu alamar [GND] da [EOL].
    Shigarwa Akan Rufe:
    Wire relay na FACP ɗin ku da resistor 10K a jere akan tashoshi masu alamar [GND] da [EOL].
  10. FACP Dry NC fitarwa:
    Haɗa na'urar da ake so don buɗewa ta busasshiyar fitowar lamba ta naúrar zuwa tashoshi masu alama [NC] da [C]. Lokacin da [EOL JMP] ke cikin matsayi na DIS, fitarwar ita ce juriya ta 0 Ohm a cikin yanayin al'ada. Lokacin da [EOL JMP] ke cikin matsayi na EN, za a ƙaddamar da juriya na 10k zuwa na'ura ta gaba lokacin da ke cikin yanayin al'ada.
  11. Haɗin Batir na tsaye (Hoto 3, shafi 7, Hoto 4, shafi na 8): Don aikace-aikacen Ikon Samun damar Amurka Batura na zaɓi ne. Ana buƙatar batura don shigarwa na Kanada (ULC-S319). Lokacin da ba a yi amfani da batura ba, asarar AC zai haifar da asarar juzu'in fitarwatage. Lokacin da ake son amfani da batura masu aiki, dole ne su zama nau'in gubar acid ko gel. Haɗa baturi zuwa tashoshi na LINQ8ACM(CB) masu alamar [+ BAT -] (Hoto 3, shafi 7). Yi amfani da batura guda biyu (2) 12VDC da aka haɗa a jeri don aikin 24VDC (an haɗa da jagororin baturi). Yi amfani da batura Cavil CL1270 (12V/7AH), CL12120 (12V/12AH), CL12400 (12V/40AH), CL12650 (12V/65AH) batura ko UL gane batir BAZR2 da BAZR8 na ƙimar da ta dace.
  12. Fitowar baturi da AC Supervision (Hoto 3, shafi na 7, Hoto 4, shafi 8): eFlow104NB masana'anta ce da aka haɗa da LINQ8ACM (CB) don kula da baturi da AC.
  13. Don jinkirta rahoton AC na tsawon awanni 2. saita canza DIP [AC Jinkiri] zuwa matsayin KASHE (Fig. 2c, shafi 6). Don jinkirta rahoton AC na minti 1. saita canza DIP [AC Jinkiri] zuwa ON matsayi (Fig. 2c, shafi 6).
  14.  eFlow104NB Kashe Haɗin Ƙararrawar Wuta (Hoto 2c, shafi na 6): Don kunna Ƙararrawar Wuta Cire haɗin haɗin saitin DIP (Rufewa) zuwa ON matsayi. Don kashe Ƙararrawar Wuta Cire haɗin yanar gizo saita sauya DIP [Rufewa] zuwa KASHE matsayi.
  15. Shigar da tampya canza: Dutsen UL Jerin tamper canza (samfurin Altronix TS112 ko daidai) a saman shingen. Zamar da tampmadaidaicin madaidaicin maɓalli a gefen shingen kusan 2” daga gefen dama (Fig. 4a, shafi 8). Haɗa tampcanza wayoyi zuwa shigar da Panel Control Panel ko na'urar da aka jera UL mai dacewa. Don kunna siginar ƙararrawa buɗe ƙofar kewayen.

Waya:
Yi amfani da 18 AWG ko mafi girma don duk ƙaramin voltage ikon haɗi.
Lura: Kula da kiyaye iyakokin da'irar wutar lantarki daban daga wayoyi marasa iyaka (120VAC, Baturi).
Kulawa:
Ya kamata a gwada naúrar aƙalla sau ɗaya a shekara don aikin da ya dace kamar haka:
Fitarwa Voltage Gwaji: A ƙarƙashin yanayin kaya na yau da kullun, fitarwar DC voltage ya kamata a duba don daidai voltage matakin eFlow104NB: 24VDC mai ƙididdigewa @ 10A max.
Gwajin Baturi: A ƙarƙashin yanayin kaya na al'ada duba cewa an cika cajin baturin, duba ƙayyadaddun voltage (24VDC @ 26.4) duka a tashar baturi da kuma a tashoshin allon da aka yiwa alama [- BAT +] don tabbatar da cewa babu karya a cikin wayoyi masu haɗin baturi.
Lura: Matsakaicin caji na yanzu ƙarƙashin fitarwa shine 1.54A.
Lura: Rayuwar baturi da ake tsammani shine shekaru 5, duk da haka ana bada shawarar canza batir a cikin shekaru 4 ko ƙasa da haka idan an buƙata.
LED Diagnostics:
eFlow104NB Power Supply/Caja

Ja (DC) Green (AC/AC1) Matsayin Samar da Wuta
ON ON Yanayin aiki na al'ada.
ON KASHE Asarar AC. Baturi na tsaye yana samar da wuta.
KASHE ON Babu fitarwa na DC.
KASHE KASHE Asarar AC. An cire ko babu baturi mai jiran aiki. Babu fitarwa na DC.

LINQ8ACM da LINQ8ACMCB Mai Kula da Wutar Lantarki ta hanyar sadarwa

LED ON KASHE
LED 1-LED 8 (ja) Relay(s) na fitar da kuzari. Relay(s) na fitar da kuzari.
Farashin FACP An kunna shigar da FACP (yanayin ƙararrawa). FACP na al'ada (yanayin rashin ƙararrawa).
Koren Fitowa 1-8 Saukewa: 12VDC –
Jajayen Fitowa 1-8 Saukewa: 24VDC –
AC AC Kasa AC Normal
BAT Rashin Baturi Baturi Al'ada

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-02

Matsala/Lokaci Iyakataccen Gargaɗi na Batura Masu Tsaya:
Don biyan bukatun ULC S318-96, Dole ne a haɗa da'irar Gargaɗi mai iyaka don sanarwa na gida ko na nesa tare da Amber ko Red LED don nuna Matsalolin DC (ƙananan baturi, asarar baturi ko lokacin da 95% na baturin jiran aiki ya kasance. depleted). Haɗa da'irar zuwa lambobin sadarwa na Batt Fail zuwa shigar da ta dace na UL Listed Burglar Ƙararrawa ko Cibiyar Kulawa ta Samun dama. Hoton da ke gaba yana nuna da'irar da ake buƙata don shelar gida.

Shaidar Ƙarshe:
eFlow104NB Power Supply/Caja

Terminal/Legenal Bayani
A -PWR1 + An haɗa masana'anta zuwa eFlow104NB.
B -PWR2 + Shigar da wutar lantarki ta biyu na zaɓin zaɓi.
C Fitarwa LED Fitowar mutum ɗaya voltage LEDs. 12VDC (Green) ko 24VDC (Red).
D Jumper mai fitarwa Fitowar mutum ɗaya voltage selection jumper (ma'aikata da aka zaɓa don fitarwa na 24VDC).
E COM - Toshe mara kyau na gama gari [-] don masu haɗin spade.
 

F

 Fitowa ta 1

Fitarwa 8

NO, C, NC, COM

  

Takwas (8) zaɓaɓɓun abubuwan sarrafawa masu zaman kansu [Fail-Safe (NC) ko Fail-Secure (NO)].
G - F, + F FACP Siginar Tashoshin Shigar da Wuta. Matsayi na 2 mai iyaka.
H -R, + R FACP Siginar Matsalolin Komawa Da'ira. Matsayi na 2 mai iyaka.
I GND, EOL EOL Tashoshin shigarwar FACP mai kulawa don juyar da aikin FACP na polarity. Matsayi na 2 mai iyaka.
J GND, RST FACP interface latching ko rashin latching. NO bushe shigarwa. Matsayi na 2 mai iyaka. Don a gajarta don ƙirar FACP mara amfani ko Latch FACP sake saiti.
K C, NC FACP Dry NC fitarwa mai ƙima 1A/28VDC @ 0.6 Factor Power. Matsayi na 2 mai iyaka. Tare da EOL JMP cikakke, zai samar da juriya na 10k a cikin yanayin al'ada.
L + PS1- Kamfanin da aka haɗa zuwa [+ BAT -] tashoshi na eFlow104NB wutar lantarki.
M + BAT - Haɗi zuwa baturan jiran aiki.
N + PS2- Haɗa zuwa [+ BAT -] tashoshi na zaɓin wutar lantarki na biyu na DC.
O + BAT - Haɗi zuwa baturin jiran aiki don zaɓin wutar lantarki na biyu na DC.
P + INP1 - ta hanyar

+ INP8-

 Takwas (8) mai zaman kansa Buɗewa ta al'ada (NO), An rufe ta ta al'ada (NC), Buɗaɗɗen Mai Tari ko Rigar shigar da Jika.
Q Tamper Tampko Canja Input.
R AC / NC, C Haɗa na'urorin sanarwar sigina masu dacewa zuwa tashoshi don ba da rahoton gazawar AC.
S BAT/NC, C Haɗa na'urorin sanarwar sigina masu dacewa zuwa tashoshi don bayar da rahoton gazawar baturi.
T   An tanadi don amfani nan gaba.
U 8-Mai Haɗa Fil Don haɗi zuwa VR6 ko Tango1B.
V USB Haɗin kwamfutar tafi-da-gidanka yana ba da damar saitin farko da shirye-shirye na LINQ8ACM (CB).
W RJ45 Ethernet: Haɗin LAN ko kwamfutar tafi-da-gidanka yana ba da damar shirye-shiryen LINQ8ACM (CB) da saka idanu kan matsayi.
X PWR1+, PWR2+ Matosai masu inganci [+] don masu haɗin spade.
Y 2-Mai Haɗa Fil Haɗin kai zuwa tashoshi na [AC Fail] akan wutar lantarki.
Z Farashin EOL Yana ɗaukar 10k Ohm resistor Ƙarshen Layi.

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-04

Shaidar Ƙarshe:
LINQ8ACM da LINQ8ACMCB Mai Kula da Wutar Lantarki ta hanyar sadarwa

Labarin Ƙarshe Aiki/Bayyana
L, N Haɗa 120VAC 60Hz zuwa waɗannan tashoshi: L zuwa zafi, N zuwa tsaka tsaki (mara iyaka)

(Hoto na 2a, shafi na 6).
- DC + 24VDC nominal @ 10A ci gaba da fitarwa (fitarwa mara iyaka) (Hoto na 2h, shafi na 6).
Ana Kula da Ƙaddamar da EOL Wuta Ƙararrawa Interface yana jawo shigarwar shigarwa daga gajere ko FACP. Ana iya buɗe abubuwan shigar da ƙara a kullum, galibi ana rufe su daga da'irar fitarwa ta FACP (shigarwa mai iyakacin ƙarfi) (Hoto na 2d, shafi na 6).
A'a, Sake saitin GND FACP interface latching ko rashin latching (iyakantaccen iko) (Hoto na 2e, shafi na 6).
+ AUX- Ƙarfafawar Class 2 mai iyakataccen fitarwa mai iyaka @ 1A (ba a kunna ba) (Hoto na 2f, shafi na 6).
AC Fail NC, C, NO Yana nuna asarar wutar AC, misali haɗi zuwa na'ura mai ji ko ƙararrawa. Relay yawanci ana samun kuzari lokacin da wutar AC ta kasance.

Ƙimar tuntuɓar 1A @ 30VDC (iyakantaccen wutar lantarki) (Hoto na 2b, shafi na 6).
 

Bat Fail NC, C, NO

 Yana nuna ƙarancin yanayin baturi, misali haɗa zuwa panel ƙararrawa. Relay yawanci yana samun kuzari lokacin da ƙarfin DC ya kasance. Ƙimar lamba 1A @ 30VDC.

Ana ba da rahoton cire baturi a cikin mintuna 5.

An ba da rahoton sake haɗa baturi a cikin minti 1 (iyakantaccen wuta) (Hoto na 2b, shafi na 6).
- BAT + Kamfanin da aka haɗa zuwa LINQ8ACM(CB).

Matsakaicin caji na yanzu 1.54A (ba iyakacin ƙarfi) (Hoto na 2g, shafi na 6).

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-05

Fitar da DC zuwa na'urori
                                                                          (eFlow104NKA8QM - marasa iyaka, eFlow104NKA8DQM - iyakantaccen iko)

Batir na tsaye mai caji na zaɓi don Aikace-aikacen UL294 Lura: Batura 12V da ake buƙata don shigarwar ULC-S319.

Batir na tsaye mai caji na zaɓi don Aikace-aikacen UL294 Lura: Batura 12V da ake buƙata don shigarwar ULC-S319.

HANKALI: Yi amfani da baturan jiran aiki guda biyu (2) 12VDC. Kiyaye iyakataccen wayoyi daban da mara iyaka. Yi amfani da mafi ƙarancin tazarar 0.25 inci. 12AH batura masu caji sune manyan batura waɗanda zasu iya dacewa da wannan shingen. Dole ne a yi amfani da shingen baturi na waje na UL idan ana amfani da batura 40AH ko 65AH.

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-05

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-07

Saita hanyar sadarwa:
Da fatan za a ziyarci altronix.com don sabon firmware da umarnin shigarwa.

Shirye-shiryen hanyar sadarwa Ta Altronix Dashboard Haɗin USB:
Ana amfani da haɗin USB akan LINQ8ACM(CB) don saita sigogin cibiyar sadarwa. Lokacin da aka haɗa zuwa PC ta kebul na USB LINQ8ACM (CB) zai karɓi wuta daga tashar USB wanda ke ba da damar shirye-shiryen cibiyar sadarwa na LINQ8ACM (CB) kafin a haɗa shi da wutar lantarki.

  1. Shigar da software da aka kawo tare da LINQ8ACM (CB) akan PC da ake amfani dashi don shirye-shirye. NOTE: Yakamata a sanya wannan software akan duk kwamfutocin da zasu sami damar shiga LINQ8ACM(CB).
  2. Haɗa kebul na USB da aka kawo zuwa tashar USB akan LINQ8ACM(CB) da kwamfutar.
  3. Danna maɓallin Dashboard sau biyu a kan tebur na kwamfutar kuma buɗe Dashboard. Shigar da User Name: admin da Password: admin don samun damar dashboard.
  4. Danna maballin da aka yiwa alama saitin hanyar sadarwa ta USB a gefen babban hannun dashboard. Wannan zai buɗe allon saitin hanyar sadarwa na USB. A cikin wannan allon za a sami adireshin MAC na tsarin LINQ8ACM (CB) tare da Saitunan hanyar sadarwa.

Saitunan hanyar sadarwa:
A cikin filin Hanyar Adireshin IP zaɓi hanyar da za a sami adireshin IP na LINQ8ACM (CB): “STATIC” ko “DHCP”, sannan bi matakan da suka dace (tuntuɓi mai gudanar da hanyar sadarwa don sanin wacce hanya za a yi amfani da ita) .
A tsaye:

  1. Adireshin IP: Shigar da adireshin IP da aka sanya wa LINQ8ACM (CB) ta mai gudanar da hanyar sadarwa.
  2. Subnet Mask: Shigar da Subnet na cibiyar sadarwa.
  3. Ƙofar: Shigar da ƙofar TCP/IP na hanyar shiga cibiyar sadarwa (na'ura mai ba da hanya tsakanin hanyoyin sadarwa) ana amfani da ita.
    NOTE: Ana buƙatar daidaitawar Ƙofar don karɓar imel da kyau daga na'urar.
  4. Port mai shiga (HTTP): Shigar da lambar tashar da aka sanya wa tsarin LINQ8ACM(CB) ta mai gudanar da hanyar sadarwa don ba da damar shiga nesa da sa ido.
  5. Danna maɓallin da aka yiwa lakabin ƙaddamar da Saitunan hanyar sadarwa. Akwatin maganganu zai nuna "Sabbin saitunan cibiyar sadarwa zai fara aiki bayan an sake kunna uwar garken". Danna Ok.
DHCP:
  1. Bayan zaɓar DHCP a cikin filin Hanyar Adireshin IP danna maɓallin da aka lakafta ƙaddamar da Saitunan hanyar sadarwa. Akwatin maganganu zai nuna "Sabbin saitunan cibiyar sadarwa zai fara aiki bayan an sake kunna uwar garken". Danna Ok. Na gaba, danna maɓallin da aka lakafta Sake Yi Sabar Sabar. Bayan sake kunna LINQ8ACM(CB) za a saita shi a yanayin DHCP. Mai ba da hanya tsakanin hanyoyin sadarwa zai sanya adireshin IP ɗin lokacin da aka haɗa LINQ8ACM (CB) zuwa cibiyar sadarwar. Ana ba da shawarar a tanadi adireshin IP da aka keɓe don tabbatar da ci gaba da samun dama (duba mai gudanar da cibiyar sadarwa).
  2. Mashin Subnet: Lokacin aiki a DHCP, na'ura mai ba da hanya tsakanin hanyoyin sadarwa zai sanya ƙimar abin rufe fuska na subnet.
  3. Ƙofar: Shigar da ƙofar TCP/IP na hanyar shiga cibiyar sadarwa (na'ura mai ba da hanya tsakanin hanyoyin sadarwa) ana amfani da ita.
  4. Port HTTP: Shigar da lambar tashar tashar HTTP da aka sanya wa tsarin LINQ8ACM(CB) ta mai gudanar da hanyar sadarwa don ba da damar shiga nesa da saka idanu. Tsohuwar saitin tashar jiragen ruwa mai shigowa shine 80. HTTP ba ta rufaffen asiri kuma mara tsaro. Ko da yake ana iya amfani da HTTP don samun dama mai nisa, ana ba da shawarar da farko don amfani da haɗin LAN.

Amintaccen Saitin hanyar sadarwa (HTTPS):
Domin saita HTTPS don Amintaccen Haɗin Yanar Gizo, dole ne a yi amfani da Ingataccen Takaddun shaida da Maɓalli. Takaddun shaida da Maɓalli yakamata su kasance cikin tsarin “.PEM”. Ya kamata a yi amfani da Takaddun shaida na kai kawai don dalilai na gwaji kamar yadda ba a yin ainihin tantancewa. A cikin yanayin ƙwararriyar kai, haɗin zai har yanzu yana bayyana cewa ba shi da tsaro.

Yadda ake Loda Takaddun shaida da Maɓalli don Saita HTTPS:

  1. Buɗe Tsaro Labeled Tab.
  2. Zaɓi Tab Labeled Email/SSL.
  3. Gungura zuwa ƙasa ƙarƙashin saitunan SSL.
  4. Danna Zaɓi Takaddun shaida.
  5. Nemo kuma zaɓi ingantaccen Takaddun shaida don loda daga uwar garken.
  6. Danna Zaɓi Maɓalli.
  7. Bincika kuma zaɓi maɓalli mai inganci don lodawa daga uwar garken.
  8. Danna Submit Files.

Da zarar an shigar da Takaddun shaida da Maɓalli cikin nasara za ku iya ci gaba da saita HTTPS a cikin Saitunan hanyar sadarwa.

  • Tashar HTTPS: Shigar da lambar tashar tashar HTTPS da aka sanya wa tsarin LINQ8ACM(CB) ta mai gudanar da cibiyar sadarwa don ba da damar shiga nesa da saka idanu. Tsohuwar saitin tashar jiragen ruwa mai shigowa shine 443. Kasancewa rufaffen rufaffiyar kuma mafi aminci, HTTPS ana ba da shawarar sosai don samun dama mai nisa.
  • Danna maɓallin da aka yiwa lakabin ƙaddamar da Saitunan hanyar sadarwa. Akwatin maganganu zai nuna "Sabbin saitunan cibiyar sadarwa zai fara aiki bayan an sake kunna uwar garken". Danna Ok.

Don samun dama ga LINQ8ACM(CB) ta Altronix Dashboard koma zuwa Dashboard Installation and Programming Manual dake kan filasha da aka kawo.
Shirye-shiryen Ta hanyar Browser:
Lokacin da ba'a amfani da haɗin USB na Altronix Dashboard don saitin hanyar sadarwa na farko, LINQ8ACM (CB) yana buƙatar haɗa shi zuwa kowace wutar lantarki ta DC ko eFlow wutar lantarki da ake saka idanu kafin shirye-shirye. Koma zuwa Umarnin Shigarwa na LINQ8ACM(CB) a shafi na 3 na wannan jagorar.

Tsoffin Saitunan Masana'anta:

  • Adireshin IP: 192.168.168.168
  • Sunan mai amfani: admin
  • Password: admin
  1. Saita adreshin IP na kwamfutar tafi-da-gidanka da za a yi amfani da shi don shirye-shirye zuwa adireshin IP iri ɗaya kamar LINQ8ACM (CB), watau 192.168.168.200 (adireshin tsoho na LINQ8ACM(CB) shine 192.168.168.168).
  2. Haɗa ƙarshen kebul ɗin cibiyar sadarwa zuwa jack ɗin cibiyar sadarwa akan LINQ8ACM (CB) ɗayan zuwa haɗin hanyar sadarwar kwamfutar tafi-da-gidanka.
  3. Bude mai bincike akan kwamfutar kuma shigar da "192.168.168.168" a cikin adireshin adireshin. Akwatin magana da ake buƙata Tabbatarwa zai bayyana yana buƙatar sunan mai amfani da kalmar sirri.
    Shigar da tsoffin ƙididdiga a nan. Danna maballin da aka yiwa lakabin Log In.
  4. Shafin matsayi na LINQ8ACM(CB) zai bayyana. Wannan shafin yana nuna ainihin lokacin matsayi da lafiyar kowane wutar lantarki da aka haɗa zuwa LINQ8ACM(CB) .Don shigar da sabbin sigogin cibiyar sadarwa, je zuwa Saita hanyar sadarwa a ƙarƙashin LINQ8ACM(CB) Sashen Kanfigareshan na wannan jagorar.

Kanfigareshan LINQ8ACM(CB):
Saita ID na Yanar Gizo, Lokaci da Kwanan wata:
Ana amfani da ID na rukunin yanar gizon don gano wuri da bayanin na'urar da ake kulawa.

  1. Danna kan Matsayi shafin don samun damar shafin matsayi.
  2. Danna kan Shafukan ID a hannun hagu na sama, akwatin maganganu zai buɗe.
  3. Shigar da wurin da bayanin na'urar da ake kulawa.
  4. Danna sallama.

Lokaci da Kwanan wata dole ne a saita domin daidai stamp tsarin log da faɗakarwar imel.

  1. Danna kan Matsayi shafin don samun damar shafin matsayi.
  2. Danna lokaci da kwanan wata a hannun hagu na sama, akwatin maganganu zai buɗe.
  3. Danna "RANAR AIKI DA LOKACI".
  • Saitin Hardware:
    Danna kan Saituna shafin don buɗe allon Saitin Hardware. Saitin shigarwa / fitarwa:
    1. Danna maballin INPUT/OUTPUT a saman allon.
    2. ID na fitarwa: Shigar da suna mai siffata don na'urar da aka haɗa da abin da aka haɗa.
    3. Ikon fitarwa: ta amfani da menu na cirewa zaɓi ko za'a sarrafa kayan fitarwa ta hanyar shigar da ikon shiga zuwa tashoshi masu jawo ko sarrafa software.
      1. Ikon shigarwa: Ana sarrafa abubuwan da aka fitar ta hanyar Input na Trigger,
      2. Sarrafa Manual: Ana sarrafa abubuwan da aka fitar da hannu ta hanyar software na LINQ. Za a sarrafa abubuwan da aka fitar ta hanyar faɗakarwa da software ta fara.
    4. An jawo: Dubawa ko buɗe akwatin fitarwa mai alaƙa zai canza fitarwa lokacin da aka danna maɓallin Submit. Za'a iya kunna fitarwa da yawa a lokaci guda.
      NOTE: Wannan aikin idan don amfani a cikin Manual Control kawai.
    5. Abubuwan shigarwa: Ana iya tsara shigar da bayanai don sarrafa fitarwa guda ɗaya ko abubuwa da yawa.
      1. Ikon fitarwa guda ɗaya: ta amfani da menu na cirewa na fitarwa mai dacewa (watau Input1 g Output1), zaɓi nau'in shigarwar sarrafa shiga NO Kullum buɗewa ko NC yawanci rufe.
      2.  Ikon fitarwa da yawa: ta amfani da menu na ƙasa na duk abubuwan da za a sarrafa (watau Input1 g Output1 g Output4 g Output7) zaɓi nau'in shigar da ikon shiga NO Kullum buɗewa ko NC yawanci rufe. Duk abubuwan da aka zaɓa za su canza yanayi lokacin da aka kunna shigarwar.
    6. Nau'in fitarwa: ta amfani da maballin cirewa zaɓi yadda za a yi amfani da fitarwar: Fail-Safe (na'urorin da ke buƙatar kulle), Fail-Secure (na'urar tana buƙatar ikon fitarwa), ko Auxiliary (na'urorin da ke buƙatar wutar lantarki akai-akai).
    7. FACP: ta amfani da maɓallin cirewa zaɓi yadda fitarwar za ta yi lokacin da katsewar ƙararrawar wuta ta kunna: Rashin aiki (fitarwa zai ci gaba da aiki), rashin latching (fitarwa zai saki lokacin da aka sake saita FACP), Latching (fitarwa zai ci gaba da kunnawa). lokacin da aka sake saitin FACP kuma ya kasance yana jawo har sai an fito da shi da hannu ta hanyar shigarwa zuwa tashoshi na sake saiti).
    8. Ajiyayyen Baturi: zaži ko za a yi wa abin da aka fitar baya a cikin lamarin rashin wutar lantarki. Cire alamar akwatin da ke da alaƙa don kashe baturin baya don wannan fitarwa.
    9. Sama/Karƙashin Yanzu: Shigar da duka Maɗaukaki da Ƙananan iyaka na halin yanzu don fitarwa mai alaƙa. Idan ɗayan waɗannan iyakoki sun wuce saƙon faɗakarwa da/ko sanarwar imel za a samar.
    10. Ƙarƙashin Ƙarƙashin Voltage: Shigar da duka High da Low voltage iyakoki don fitarwa mai alaƙa. Idan ɗayan waɗannan iyakoki sun wuce saƙon faɗakarwa da/ko sanarwar imel za a samar.
    11. Danna maɓallin da aka yiwa lakabin Sallama don adana saitunan.

Saitunan zazzabi:

  1. Danna maballin zafin jiki a saman allon.
  2. Shigar da madaidaicin zafin jiki a Celsius.
  3. Danna maɓallin da aka yiwa lakabin Sallama don adana saitunan.

Kwanan Wata Sabis na Baturi:
Idan ba a yi amfani da batura ba cire alamar akwatin da ke ƙarƙashin Present don kashe saka idanu batir.

  1. Danna shafin baturi a saman allon.
  2. Shigar da ranar da aka shigar da batura a ƙarƙashin Kwanan Ƙaddamarwa don kowace wutar lantarki da aka haɗa.
  3. Shigar da kwanan wata don sabis na baturi a ƙarƙashin Kwanan Sabis na kowace wutar lantarki da aka haɗa.
    NOTE: Ya kamata a duba batura aƙalla sau ɗaya a shekara. Ko da ta hanyar rayuwar baturi da ake tsammanin yana da shekaru biyar (5) ana ba da shawarar maye gurbin batura kowane shekaru hudu (4).
  4. Danna maɓallin da aka yiwa lakabin Sallama don adana saitunan

Saitunan Samar da Wuta:
Idan ana amfani da wutar lantarki ɗaya (1) kawai cire alamar akwatin da ke ƙarƙashin Present kusa da wutar lantarki da ba a yi amfani da shi ba don kashe sa ido.

  1. Danna maballin Kayan Wuta a saman allon.
  2. Ƙarƙashin Ƙarƙashin Voltage: Shigar da duka High and Low voltage iyakoki don shigarwar da ke da alaƙa. Idan ɗayan waɗannan iyakoki sun wuce saƙon faɗakarwa da/ko sanarwar imel za a samar.
  3. Ƙarƙashin Ƙarƙashin Ƙarƙashin Yanzu: Shigar da duka Maɗaukaki da Ƙananan iyaka na halin yanzu don shigarwar da ke da alaƙa. Idan ɗayan waɗannan iyakoki sun wuce saƙon faɗakarwa da/ko sanarwar imel za a samar.
  4. Danna maɓallin da aka yiwa lakabin Sallama don adana saitunan

Fitowar Daidaitawa na Yanzu:
A lokacin saitin farko duk abubuwan da aka fitar suna buƙatar a daidaita su don tabbatar da ingantattun karatun na yanzu.

  1. Danna maballin Calibration a saman allon.
  2. Tare da cire duk lodin kaya danna kan shafin mai lakabin Calibrate All Zero Offset Currents don saita duk abubuwan fitarwa zuwa sifili.
  3. Haɗa kowane fitarwa ɗaya bayan ɗaya, auna zane na yanzu kuma shigar da wannan ƙimar don wannan fitarwa a ƙarƙashin Actual.
  4. Danna maɓallin da aka yiwa lakabin Calibrate Gain don adana saitunan.
  5. Maimaita matakai 3 & 4 don duk sauran abubuwan da suka rage.

Lokacin musanya ko ƙara sabuwar na'ura abin da ake fitarwa yana buƙatar sake daidaitawa.

  1. Danna maballin Calibration a saman allon.
  2. Tare da cire haɗin kaya daga fitarwa, danna kan shafin da aka yiwa lakabin Calibrate Offset don fitarwa don saita halin yanzu zuwa sifili.
  3. Haɗa abin fitarwa, auna zana na yanzu kuma shigar da wannan ƙimar ƙarƙashin Gaskiya.
  4. Danna maɓallin da aka yiwa lakabin Calibrate Gain don adana saitunan.
  5. Maimaita matakai 3 & 4 don duk sauran abubuwan da suka rage.

B. Saitin Lokacin:
Danna shafin masu ƙidayar lokaci don samun damar allon saitin masu ƙidayar lokaci.

  1. Danna kan Ƙara New Timer mashaya.
  2. Label mai ƙidayar lokaci: Shigar da suna mai siffantawa don aikin mai ƙidayar lokaci.
  3. Ranar Fara Ƙidaya: Shigar da ranar da aikin lokaci zai fara (watau 10/09/2019).
  4. Tazarar lokaci: Yin amfani da menu na cirewa zaɓi tazarar lokacin da zai yi aiki.
  5. Lokacin Fara Mai ƙidayar lokaci: shigar da lokacin da taron mai ƙidayar zai fara.
  6. Ayyukan Mai ƙidayar lokaci: Zaɓi aikin don kowane fitarwa wanda zai faru yayin taron mai ƙidayar lokaci.
  7. Danna maɓallin da aka yiwa lakabin Sallama don adana saitunan. Don ƙara ƙarin al'amuran mai ƙidayar lokaci, maimaita matakai 1-7.

C. Saita hanyar sadarwa:

A tsaye:

  1. Adireshin IP: Shigar da adireshin IP da aka sanya wa LINQ8ACM (CB) ta mai gudanar da hanyar sadarwa.
  2. Subnet Mask: Shigar da Subnet na cibiyar sadarwa.
  3. Ƙofar: Shigar da ƙofar TCP/IP na hanyar shiga cibiyar sadarwa (na'ura mai ba da hanya tsakanin hanyoyin sadarwa) ana amfani da ita. Ana buƙatar daidaitawar Ƙofar don karɓar imel da kyau daga na'urar.
  4. Port HTTP: Shigar da lambar tashar tashar HTTP da aka sanya wa tsarin LINQ8ACM(CB) ta mai gudanar da cibiyar sadarwa don ba da damar shiga nesa da sa ido. Tsohuwar saitin tashar jiragen ruwa mai shigowa shine 80. HTTP ba ta rufaffen asiri kuma mara tsaro. Ko da yake ana iya amfani da HTTP don samun dama mai nisa, ana ba da shawarar da farko don amfani da haɗin LAN.
  5. Tashar HTTPS: Shigar da lambar tashar tashar HTTPS da aka sanya wa tsarin LINQ8ACM(CB) ta mai gudanar da cibiyar sadarwa don ba da damar shiga nesa da saka idanu. Tsohuwar saitin tashar jiragen ruwa mai shigowa shine 443. Kasancewa rufaffen rufaffiyar kuma mafi aminci, HTTPS ana ba da shawarar sosai don samun dama mai nisa. Lokacin da ake amfani da HTTPS ana ba da shawarar cire alamar akwatin kusa da HTTP don musaki amfani da shi.
  6. Lokacin da aka kammala duk filayen danna maɓallin da aka yiwa lakabin Submit.
  7. Danna maɓallin da aka yiwa lakabin Sake yi don ajiye saiti.

DHCP:

  1. Bayan zaɓar DHCP a cikin Hanyar filin danna maɓallin da aka lakafta Submit. Na gaba, danna maɓallin da aka yiwa lakabin Sake yi don adana saitunan. Bayan sake kunna LINQ8ACM(CB) za a saita shi a yanayin DHCP. Mai ba da hanya tsakanin hanyoyin sadarwa zai sanya adireshin IP ɗin lokacin da aka haɗa LINQ8ACM (CB) zuwa cibiyar sadarwar. Duba mai gudanar da cibiyar sadarwa don sigogin DHCP.
  2. Mashin Subnet: Lokacin aiki a DHCP na'ura mai ba da hanya tsakanin hanyoyin sadarwa zai sanya ƙimar abin rufe fuska na subnet.
  3. Ƙofar: Ƙofar TCP/IP na hanyar shiga cibiyar sadarwa (na'ura mai ba da hanya tsakanin hanyoyin sadarwa) da ake amfani da ita za a nuna.eFlow104NKA8DQM Jagoran Shigarwa
  4. d. Port HTTP: Shigar da lambar tashar tashar HTTP da aka sanya wa tsarin Linq8ACM ta mai gudanar da hanyar sadarwa don ba da damar shiga nesa da saka idanu. Tsohuwar saitin tashar jiragen ruwa mai shigowa shine 80. HTTP ba ta rufaffen asiri kuma mara tsaro. Ko da yake ana iya amfani da HTTP don samun dama mai nisa, ana ba da shawarar da farko don amfani da haɗin LAN.
  5. Tashar HTTPS: Shigar da lambar tashar tashar HTTPS da aka sanya wa tsarin LINQ8ACM(CB) ta mai gudanar da cibiyar sadarwa don ba da damar shiga nesa da saka idanu. Tsohuwar saitin tashar jiragen ruwa mai shigowa shine 443. Kasancewa rufaffen rufaffiyar kuma mafi aminci, HTTPS ana ba da shawarar sosai don samun dama mai nisa.
  6. Lokacin da aka kammala duk ƙarin filayen danna maɓallin da aka yiwa lakabin Submit.
  7. Danna maɓallin da aka yiwa lakabin Sake yi don ajiye saiti.

D. Saitunan Cloud:
An kashe tallafin gajimare na LINQ8ACM (CB) ta tsohuwa. Lokacin da aka kunna tallafin gajimare, LINQ8ACM(CB) zai yi amfani da tallafin gajimare don samar da sanarwar imel da bayar da sabuntawa idan akwai. Duba akwatin kusa da Ba da damar ba da izinin sanarwar imel ta hanyar tallafin gajimare. Babban Saituna: Ana iya karkatar da zirga-zirgar hanyar sadarwar girgije zuwa sabar gida idan ana so.

  1. Shigar da adireshin IP na uwar garken gajimare a cikin filin Adireshin IP.
  2. Shigar da pro ID a cikin filin Port.
  3. Duba akwatin kusa da Kunna.
  4. Danna maɓallin da aka yiwa lakabin Sallama don ajiye saiti.

Lokacin amfani da uwar garken gida na gida kuma SSL/TLS suna aiki, sabuwar takardar shaidar za a buƙaci a loda.

Loda takaddun shaida:

  1. Danna kan Certificate tab a saman allon.
  2. Danna Zaɓi Certificate File da gano sabon takardar shaidar.
  3. Loda takaddun shaida.
  4. Danna maɓallin da aka yiwa lakabin Submit don ajiyewa file.

E. Saitin Imel:

  1. Danna shafin Imel don samun damar allon saitunan imel.
  2. Danna kan Mai fita shafin don samun damar allon Saitunan Imel mai fita.
  3. Shigar da adiresoshin imel masu fita har guda biyar (5) waɗanda zasu karɓi faɗakarwar imel.
  4. Da zarar an shigar da duk imel danna maɓallin Submit don adana saitin.

Gwajin Imel:

  1. Danna shafin Gwaji don samun damar allon Gwajin Imel.
  2. Amfani da menu na ƙasa zaɓi saƙon gwaji da za a aika.
  3. Danna maɓallin Submit don aika saƙon gwaji.

F. Saitunan Tsaro na hanyar sadarwa:

  1. Danna kan Tsaro shafin don samun damar allon Saitunan Tsaro.
  2. Danna shafin da ya dace a saman allon don tsara filayen.

Manufofin:
Zaɓi gargaɗin tsaro da za a nuna lokacin shiga cikin tsarin ta duba don nunawa da cirewa don nuna saƙon gargaɗin.

Saitin Takaddun Sa hannu na Kai:
Samar da Takaddun shaida na SSL da Maɓalli:

  1. Jiha: Lambobin haruffa biyu masu wakiltar jihar da ƙungiyar take.
  2. Wuri: Garin da kungiyar take.
  3. Ƙungiya: Sunan doka na ƙungiyar. Bai kamata a gajarta wannan ba, kuma yakamata ya haɗa da kari kamar Inc., Corp, ko LLC.
  4. Sunan naúrar: Sunan na'urar.
  5. Sunan gama gari: Sunan yanki ko adireshin IP na uwar garken. Mai gudanar da hanyar sadarwa ne ke keɓe wannan yawanci.
  6. Adireshin Imel: Adireshin imel da ake amfani da shi don tuntuɓar ƙungiyar.
  7. Bayan an gama duk filin danna maɓallin da aka yiwa lakabin Submit to save settings

NOTE: Za a samar da takardar shaidar SSL mai hannu da kai tare da bayanan da aka bayar a cikin filayen “Saitunan Takaddun shaida na SSL”. Takaddar za ta kasance mai aiki na kwanaki 500, kuma lokaci stamped tare da saitunan lokaci da ke kan tsarin LINQ8ACM (CB). Dole ne a daidaita kwanan wata da lokaci tare da kwamfutar mai masauki kafin samar da takardar shaidar SSL.

Loda takaddun shaida:
Ana loda takaddun shaida da maɓalli na sirri.

  1. A ƙarƙashin Takaddun shaida upload danna kan Zaɓi Certificate File.
  2. Nemo sabon takardar shaidar file.
  3. Loda takaddun shaida file.
  4. A ƙarƙashin Maɓallin Maɓalli danna maɓallin Zaɓi File.
  5. Nemo sabon takardar shaidar file.
  6. Loda Maɓalli file.
  7. Danna maɓallin da aka yiwa lakabin Submit file ajiye saituna

Saitunan Mai amfani:
Akwai matakan mai amfani da yawa masu shirye-shirye akwai.
Mai gudanarwa: Yana da damar yin amfani da duk ayyuka.
Matsayi / Saiti: Yana da ikon kunnawa/kashewa kuma yana iya sake suna kayan wuta. Network: Wannan saitin na masu gudanar da IT ne.
Kulawa: Yana da damar gyara faɗakarwa da sarrafa mai ƙidayar lokaci.
Saita Masu Amfani:

  1. Danna shafin Masu amfani.
  2. Danna kan Ƙara sabon maɓallin mai amfani sabon Form ɗin mai amfani zai buɗe.
  3. Shigar da sunan mai amfani.
  4. Shigar da keɓaɓɓen kalmar sirri a ƙarƙashin Sabuwar Kalmar wucewa.
  5. Sake shigar da kalmar wucewa a ƙarƙashin Tabbatar da Kalmar wucewa.
  6. Zaɓi nau'in mai amfani da haƙƙoƙin mai amfani: Karanta/Rubuta (zai iya yin canje-canje) ko Karanta Kawai (view kawai). Ana iya saita mai amfani azaman mai gudanarwa ta danna kan MAKE ADMIN sama da maɓallin Submit.
  7. Danna kan Sallama don ajiye saituna.
  8. Maimaita abin da ke sama don ƙara ƙarin masu amfani.

Faɗakarwa da Saitunan jinkiri:
Ana iya kunna faɗakarwa don aika sanarwar cewa wani abu ya faru ko an kashe shi don yin watsi da taron kuma ba a aika sanarwa ba. Don kashe wani taron, cire alamar Enable akwatin kusa da taron da za a kashe. Don sake kunna taron duba akwatin kusa da taron.
Ana iya saita abubuwan da suka faru don jinkirtawa kafin yin rahoto.
Don saita jinkirin rahoto shigar da lokacin jinkiri a cikin ginshiƙi ƙarƙashin Rahoton Jinkiri don abin da ya haɗa. An saita lokacin jinkiri a cikin daƙiƙa. An shirya duk abubuwan da suka faru na daƙiƙa 2. Da zarar an kammala duk filayen danna maɓallin da aka yiwa lakabin Submit don adana saitunan taron. Maimaita duk sauran abubuwan da za a shirya su.

Zane-zane na Ƙunƙwasa:

Hoto 6 - Daisy-sarkar ɗaya ko fiye LINQ8ACM(CB). Ya kamata a shigar da EOL Jumper [EOL JMP] a matsayin EOL. Rashin Latsawa.

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-08

Hoto 7 - Daisy-sarkar ɗaya ko fiye LINQ8ACM(CB). Ya kamata a shigar da EOL Jumper [EOL JMP] a matsayin EOL. Latching Single Sake saiti.

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-09

Hoto 8 – Daisy sarkar daya ko fiye LINQ8ACM(CB). Ya kamata a shigar da EOL Jumper [EOL JMP] a matsayin EOL. Latching Mutum Sake saitin.

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-10

Zane-zane na Ƙunƙwasa:

Hoto 9 – Shigar da juyar da polarity daga fitarwa na sigina na FACP (an yi nuni da polarity a yanayin ƙararrawa). Rashin Latsawa.

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-11

Hoto 10 – Shigar da jujjuyawar polarity daga fitowar sigina na FACP (an yi nuni da polarity a yanayin ƙararrawa). Latching.

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-12

Hoto na 11 – Abubuwan shigar da faɗakarwa da aka rufe (Ba Latching).

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-13

Hoto na 12 – Shigar da faɗakarwa da ke rufewa(Latching).

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-14

Hoto 13 – Buɗe shigar da fararwa ta al'ada (Ba Latching).

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-15

Hoto 14 – Buɗe shigar da faɗakarwa ta al'ada (Latching).

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-16

Girman Rukunin (BC400):
15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm)

Altronix-eFlow104NKA8QM-eries-Networkable-Dual-Fit-Access-Power-Controllers-17

Altronix bashi da alhakin kowane kurakurai na rubutu. 140 58th Street, Brooklyn, New York 11220 USA | waya: 718-567-8181 | Saukewa: 718-567-9056website: www.altronix.com | e-mail: info@altronix.com | Garanti na Rayuwa IIeeFlow104NKA8DQM G30U

Takardu / Albarkatu

Altronix eFlow104NKA8QM Series Mai Rarraba Sautin Samar da Wutar Lantarki [pdf] Jagoran Shigarwa
eFlow104NKA8QM Series Networkable Dual Output Access Power Controllers, eFlow104NKA8QM Series, Networkable Dual Output Access Power Controllers, Power Controllers

Magana

Labarai masu alaka

Bar sharhi

Ba za a buga adireshin imel ɗin ku ba. Ana yiwa filayen da ake buƙata alama *